/// <summary>
/// Overrides <see cref="CADability.Curve2D.GeneralCurve2D.Intersect (ICurve2D)"/>
/// </summary>
/// <param name="IntersectWith"></param>
/// <returns></returns>
public override GeoPoint2DWithParameter[] Intersect(ICurve2D IntersectWith)
{ // gesucht sind alle Schnittpunkte, also auch in der Verlängerung!
Line2D l2d = IntersectWith as Line2D;
if (l2d != null)
{
GeoPoint2D ip;
if (Geometry.IntersectLL(startPoint, endPoint, l2d.StartPoint, l2d.EndPoint, out ip))
{
double pos1 = this.PositionOf(ip);
double pos2 = l2d.PositionOf(ip);
GeoPoint2DWithParameter pwp = new GeoPoint2DWithParameter();
pwp.p = ip;
pwp.par1 = pos1;
pwp.par2 = pos2;
return(new GeoPoint2DWithParameter[] { pwp });
}
else
{
return(new GeoPoint2DWithParameter[0]);
}
}
Circle2D c2d = IntersectWith as Circle2D;
if (c2d != null)
{
GeoPoint2D[] isp = Geometry.IntersectLC(startPoint, endPoint, c2d.Center, c2d.Radius);
GeoPoint2DWithParameter[] res = new GeoPoint2DWithParameter[isp.Length];
for (int i = 0; i < isp.Length; ++i)
{
res[i].p = isp[i];
res[i].par1 = this.PositionOf(isp[i]);
res[i].par2 = c2d.PositionOf(isp[i]);
}
return(res);
}
Ellipse2D e2d = IntersectWith as Ellipse2D;
if (e2d != null)
{
GeoPoint2D[] isp = Geometry.IntersectEL(e2d.center, e2d.majorAxis.Length, e2d.minorAxis.Length, e2d.majorAxis.Angle, startPoint, endPoint);
GeoPoint2DWithParameter[] res = new GeoPoint2DWithParameter[isp.Length];
for (int i = 0; i < isp.Length; ++i)
{
res[i].p = isp[i];
res[i].par1 = this.PositionOf(isp[i]);
res[i].par2 = e2d.PositionOf(isp[i]);
}
return(res);
}
Polyline2D p2d = IntersectWith as Polyline2D;
if (p2d != null)
{
GeoPoint2DWithParameter[] res = p2d.Intersect(this); // sorum geht es
for (int i = 0; i < res.Length; ++i)
{
double t = res[i].par1;
res[i].par1 = res[i].par2;
res[i].par2 = t;
}
return(res);
}
Path2D pa2d = IntersectWith as Path2D;
if (pa2d != null)
{
GeoPoint2DWithParameter[] res = pa2d.Intersect(this); // sorum geht es
for (int i = 0; i < res.Length; ++i)
{
double t = res[i].par1;
res[i].par1 = res[i].par2;
res[i].par2 = t;
}
return(res);
}
BSpline2D b2d = IntersectWith as BSpline2D;
if (b2d != null)
{
GeoPoint2DWithParameter[] res = b2d.Intersect(this); // sorum geht es
for (int i = 0; i < res.Length; ++i)
{
double t = res[i].par1;
res[i].par1 = res[i].par2;
res[i].par2 = t;
}
return(res);
}
return(base.Intersect(IntersectWith));
}
/// <summary>
/// Overrides <see cref="CADability.Curve2D.GeneralCurve2D.MinDistance (ICurve2D)"/>
/// </summary>
/// <param name="Other"></param>
/// <returns></returns>
public override double MinDistance(ICurve2D Other)
{
if (Other is Line2D)
{
return(Other.MinDistance(this)); // bei der Linie ist es definiert
}
else if (Other is Circle2D)
{
double minDist = Curves2D.SimpleMinimumDistance(this, Other); // dort werden die Schnitt- Start- Endpunkte miteinander verrechnet
// jetzt nur noch gucken, ob sich die beiden Kreise oder Bögen annähern
Circle2D c = Other as Circle2D;
double cdist = Geometry.Dist(c.center, center);
if (cdist < Precision.eps)
{
return(minDist); // mit gleichen Mittelpunkten funktioniert
}
// das folgende nicht, aber der Abstand ist schon von SimpleMinimumDistance bestimmt
// da dort auch die Fußpunkte verwendung finden
if (cdist > c.radius + radius)
{ // Annäherung zweier nicht schneidenden Kreise
GeoVector2D dir = c.center - center; // von hier zum anderen
dir.Norm();
GeoPoint2D p1 = center + radius * dir;
GeoPoint2D p2 = c.center + c.radius * dir.Opposite();
double pos1 = this.PositionOf(p1);
double pos2 = c.PositionOf(p2);
if (pos1 >= 0.0 && pos1 <= 1.0 && pos2 >= 0.0 && pos2 <= 1.0)
{
minDist = Math.Min(minDist, cdist - c.radius - radius);
}
}
else if (radius - c.radius > cdist)
{ // Kreis c liegt innerhalb von diesem Kreis
GeoVector2D dir = c.center - center; // von hier zum anderen
dir.Norm();
GeoPoint2D p1 = center + radius * dir;
GeoPoint2D p2 = c.center + c.radius * dir;
double pos1 = this.PositionOf(p1);
double pos2 = c.PositionOf(p2);
if (pos1 >= 0.0 && pos1 <= 1.0 && pos2 >= 0.0 && pos2 <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p1, p2));
}
}
else if (c.radius - radius > cdist)
{ // dieser Kreis liegt innerhalb von c
GeoVector2D dir = center - c.center;
dir.Norm();
GeoPoint2D p1 = c.center + c.radius * dir;
GeoPoint2D p2 = center + radius * dir;
double pos1 = c.PositionOf(p1);
double pos2 = PositionOf(p2);
if (pos1 >= 0.0 && pos1 <= 1.0 && pos2 >= 0.0 && pos2 <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p1, p2));
}
}
return(minDist);
}
else
{
return(base.MinDistance(Other));
}
}
/// <summary>
/// Overrides <see cref="CADability.Curve2D.GeneralCurve2D.MinDistance (ICurve2D)"/>
/// </summary>
/// <param name="Other"></param>
/// <returns></returns>
public override double MinDistance(ICurve2D Other)
{
if (Other is Line2D)
{
Line2D l = Other as Line2D;
// schneller Vorabtest auf Schnitt: (noch nicht getestet)
double f1 = (startPoint.x - endPoint.x) * (l.endPoint.y - endPoint.y) - (startPoint.y - endPoint.y) * (l.endPoint.x - endPoint.x);
double f2 = (startPoint.x - endPoint.x) * (l.startPoint.y - endPoint.y) - (startPoint.y - endPoint.y) * (l.startPoint.x - endPoint.x);
if (f1 * f2 < 0.0)
{ // verschiedenes Vorzeichen
double f3 = (l.startPoint.x - l.endPoint.x) * (endPoint.y - l.endPoint.y) - (l.startPoint.y - l.endPoint.y) * (endPoint.x - l.endPoint.x);
double f4 = (l.startPoint.x - l.endPoint.x) * (startPoint.y - l.endPoint.y) - (l.startPoint.y - l.endPoint.y) * (startPoint.x - l.endPoint.x);
if (f3 * f4 < 0.0)
{
return(0.0); // echter Schnittpunkt
}
}
double minDist = double.MaxValue;
double dx1 = endPoint.x - startPoint.x;
double dy1 = endPoint.y - startPoint.y;
bool DoDx1 = Math.Abs(dx1) > Math.Abs(dy1);
double dx2 = l.endPoint.x - l.startPoint.x;
double dy2 = l.endPoint.y - l.startPoint.y;
bool DoDx2 = Math.Abs(dx2) > Math.Abs(dy2);
double d;
// Berechnung der Fußpunktabstände, wenn sie auf die andere Linie treffen
GeoPoint2D p = Geometry.DropPL(l.startPoint, startPoint, endPoint);
if (DoDx1)
{
d = (p.x - startPoint.x) / dx1;
}
else
{
d = (p.y - startPoint.y) / dy1;
}
if (d >= 0.0 && d <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p, l.startPoint));
}
p = Geometry.DropPL(l.endPoint, startPoint, endPoint);
if (DoDx1)
{
d = (p.x - startPoint.x) / dx1;
}
else
{
d = (p.y - startPoint.y) / dy1;
}
if (d >= 0.0 && d <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p, l.endPoint));
}
p = Geometry.DropPL(startPoint, l.startPoint, l.endPoint);
if (DoDx2)
{
d = (p.x - l.startPoint.x) / dx2;
}
else
{
d = (p.y - l.startPoint.y) / dy2;
}
if (d >= 0.0 && d <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p, startPoint));
}
p = Geometry.DropPL(endPoint, l.startPoint, l.endPoint);
if (DoDx2)
{
d = (p.x - l.startPoint.x) / dx2;
}
else
{
d = (p.y - l.startPoint.y) / dy2;
}
if (d >= 0.0 && d <= 1.0)
{
minDist = Math.Min(minDist, Geometry.Dist(p, endPoint));
}
if (minDist == double.MaxValue)
{ // kein Fußpunkt auf der anderen Linie: die gegenseitigen Start/Endpunkt
// Abstände verwenden
minDist = Math.Min(minDist, Geometry.Dist(l.startPoint, endPoint));
minDist = Math.Min(minDist, Geometry.Dist(l.endPoint, endPoint));
minDist = Math.Min(minDist, Geometry.Dist(l.startPoint, startPoint));
minDist = Math.Min(minDist, Geometry.Dist(l.endPoint, startPoint));
}
return(minDist);
}
else if (Other is Arc2D)
{
double minDist = Curves2D.SimpleMinimumDistance(this, Other);
Arc2D a = Other as Arc2D;
GeoPoint2D[] fp = PerpendicularFoot(a.Center);
for (int i = 0; i < fp.Length; ++i)
{
GeoPoint2D p = fp[i];
double pos = PositionOf(p);
if (pos >= 0.0 && pos <= 1.0)
{
pos = a.PositionOf(p);
if (pos >= 0.0 && pos <= 1.0)
{
double d = Geometry.Dist(p, a.Center);
if (d > a.Radius)
{
minDist = Math.Min(minDist, d - a.Radius);
}
}
}
}
return(minDist);
}
else if (Other is Circle2D)
{
double minDist = Curves2D.SimpleMinimumDistance(this, Other);
Circle2D c = Other as Circle2D;
GeoPoint2D[] fp = PerpendicularFoot(c.Center);
for (int i = 0; i < fp.Length; ++i)
{
GeoPoint2D p = fp[i];
double pos = PositionOf(p);
if (pos >= 0.0 && pos <= 1.0)
{
double d = Geometry.Dist(p, c.Center);
if (d > c.Radius)
{
minDist = Math.Min(minDist, d - c.Radius);
}
}
}
return(minDist);
}
else
{
return(base.MinDistance(Other));
}
}