public CharakterHuman(GeListNode node, DescriptionCommand desc)
{
this.b = GetDataInstance(node);
this.button = desc.id.GetAt(0).id;
this.doc = C4dApi.GetActiveDocument();//Speichern aller Elemente im Dokument in die Variable doc
this.myMesh = b.GetObjectLink(SKELETT_OBJ_AUSWAHL, doc); //selektiertes Object in die Variable ObjSe speichern
this.mcd = new ModelingCommandData(this.doc, this.myMesh, this.myMesh.GetDataInstance(), MODELINGCOMMANDMODE.MODELINGCOMMANDMODE_ALL, MODELINGCOMMANDFLAGS.MODELINGCOMMANDFLAGS_CREATEUNDO, null, null);
/**
* Bisheriges speichern und in die Szene zeichnen
*/
C4dApi.EventAdd();
/**
* Wichtungstag definieren
*/
this.wtag = CAWeightTag.Alloc();
//TODO - Geaendert von DS
//this.wtagBaseTag = BaseTag.Alloc(C4dApi.Tweights);
/**
* Wichtungstag in das BaseObject einbauen
*/
this.myMesh.InsertTag(this.wtag);
/**
* Standard BaseObject vom Typ Joint erstellen, diese sind bei Menschen immer aktiv
*/
BaseObject jointSpine = this.allocJoint("Spine");
BaseObject jointAbs = this.allocJoint("Abs", jointSpine, new double3(0, 100, 0));
BaseObject jointChest = this.allocJoint("Chest", jointAbs, new double3(0, 50, 0));
BaseObject jointNeck = this.allocJoint("Neck", jointChest, new double3(0, 25, 0));
BaseObject jointHead = this.allocJoint("Head", jointNeck, new double3(0, 50, 0));
BaseObject jointL_Hip = this.allocJoint("L_Hip", jointSpine, new double3(25, 0, 0));
BaseObject jointL_Shoulder = this.allocJoint("L_Shoulder", jointChest, new double3(25, 0, 0));
/**
* Spiegelung
*/
BaseObject jointR_Hip = this.allocMirrorJoint("R_Hip", jointSpine, jointL_Hip);
BaseObject jointR_Shoulder = this.allocMirrorJoint("R_Shoulder", jointChest, jointL_Shoulder);
/***********
* Übergabe an den Wichtungstag
***********/
/**
* Arme hinzufügen
*/
this.AddArms(jointL_Shoulder, jointR_Shoulder);
/**
* Füße hinzufügen
*/
this.AddFeet(jointL_Hip, jointR_Hip);
/**
* Standard
*/
this.wtag.AddJoint(jointSpine);
this.wtag.AddJoint(jointAbs);
this.wtag.AddJoint(jointChest);
this.wtag.AddJoint(jointNeck);
this.wtag.AddJoint(jointHead);
// Linke seite vom Körper
this.wtag.AddJoint(jointL_Hip);
this.wtag.AddJoint(jointL_Shoulder);
// Rechte seite vom Körper
this.wtag.AddJoint(jointR_Hip);
this.wtag.AddJoint(jointR_Shoulder);
/**
* Debug Ausgabe erstellen
*/
C4dApi.GePrint("Der Joint wurde angelegt");
jointSpine.GetTag(C4dApi.Tweights);
/**
* Skin Objekt einfügen
*/
BaseObject skin = BaseObject.Alloc(C4dApi.Oskin);
if (skin != null)
{
skin.InsertUnder(this.myMesh);
skin.SetEditorMode(C4dApi.MODE_ON);
//BaseContainer bcc = skin.GetDataInstance();
//InExcludeData list=new InExcludeData(0);
//BaseList2D b2d = bcc.GetLink(SKELETT_OBJ_AUSWAHL, doc);
//list.InsertObject(b2d,0);
// InExcludeData list = (InExcludeData)bcc.GetCustomDataType(ID_CA_SKIN_OBJECT_INCLUDE, C4dApi.CUSTOMDATATYPE_INEXCLUDE_LIST);
// list.InsertObject(this.myMesh, 0);
//bcc.SetLong(ID_CA_SKIN_OBJECT_INCEXC, 1);
//bcc.GetCustomDataType(ID_CA_SKIN_OBJECT_INCEXC_INCLUDE, C4dApi.CUSTOMDATATYPE_INEXCLUDE_LIST);
// InExcludeData list = (InExcludeData)
//bcc.SetData(ID_CA_SKIN_OBJECT_INCEXC,true);
//bcc.GetCustomDataType(ID_CA_SKIN_OBJECT_INCLUDE, C4dApi.CUSTOMDATATYPE_INEXCLUDE_LIST);
//int t = bcc.GetId();
//C4dApi.GePrint("list " + t);
// list.InsertObject(this.myMesh, 0);
//C4dApi.GePrint("list OBJ " + list.GetObjectCount());
/*c++ Variante
BaseObject *skin; // a pointer to a skin object
BaseContainer *bc = skin->GetDataInstance();
InExcludeData *list = (InExcludeData*)bc->GetCustomDataType(ID_CA_SKIN_OBJECT_INCLUDE, CUSTOMDATATYPE_INEXCLUDE_LIST);
BaseObject *mesh; // the object you want to insert into the list
list->InsertObject(mesh, 0);
*/
//InExcludeData iex = autoAlloc();
// InExcludeCustomGui iex = CustomDataType
//iex.InsertObject(b.GetLink(SKELETT_OBJ_AUSWAHL,this.doc),1);
}
/**s
* Zur Szene hinzufügen
*/
//rem.GetName();
//rem.Remove();
C4dApi.EventAdd();
//C4dApi.GetObjectName(1000023); // gibt "Biped Plugin" aus
//C4dApi.GePrint("anzal der bones: "+this.wtag.GetJointCount());
doc.SetActiveObject(this.myMesh);//Selektiert das Model im OM
//BaseList2D te = this.b.GetLink(1000023, this.doc);
//te.Remove();
}
//wird aufgerufen, wenn ein Event ausgeführt wurde
//TODO: Override gelöscht - DS
public bool OnDescriptionCommand(GeListNode node, DescriptionCommand desc)
{
long button = desc.id.GetAt(0).id;
//BaseList2D ObjSelector = bc.GetLink(SKELETT_OBJ_AUSWAHL, doc);
switch (button)
{
case SKELETT_BTN_CREATE:
BaseContainer b = GetDataInstance(node);
BaseDocument doc = C4dApi.GetActiveDocument();
BaseList2D ObjSelector = b.GetLink(SKELETT_OBJ_AUSWAHL, doc);
/*Eingeforene Selektion Auswählen vom Typ Polygon ENDE*/
if (ObjSelector == null)
{
C4dApi.MessageDialog("Bitte wählen Sie zuerst ein Polygonobjekt aus, bevor Sie ein Biped erstellen!");
}
else
{
long skelett = b.GetLong(SKELETT_TYPE);
if (skelett == 3)
{
this.makeAnimalJoints(node, desc);
}
else
{
this.makeJoints(node, desc);
}
}
// C4dApi.GePrint("Der button Erstellen wurde gedrück "+objSe.GetNodeID()+objSe.GetName());
//ObjSe.GetName() liefert den namen des Selektierten Objekts zurück.
break;
case SKELETT_WICHTUNG_BTN:
/*Eingefrorene Selektion Auswählen vom Typ Polygon START*/
BaseContainer b2 = GetDataInstance(node);
BaseDocument doc2 = C4dApi.GetActiveDocument();
BaseObject op2 = b2.GetObjectLink(SKELETT_OBJ_AUSWAHL, doc2);
BaseTag t = op2.GetTag(C4dApi.Tpolygonselection);
//string selekname = t.GetName();
//BaseTag t2 = op2.GetTag(C4dApi.Tpolygonselection,1);
//if (op2.GetTag(C4dApi.Tpolygonselection,2)==null)
//{ }
//C4dApi.GePrint(" blubb " + t2.GetName() + " der name der vorherigen Selektion lautet: " + selekname);
//C4dApi.GePrint(" blubb der name der vorherigen Selektion lautet: " + selekname);
//BaseObject j = this.wtagGlob.GetJoint(1, doc2);
//C4dApi.GePrint("Knochenname "+j.GetName());
//string joinName = j.GetName();
//if (joinName == selekname)
//{
// C4dApi.GePrint("stimmen ueberein");
//}
//SelectionTag st = SelectionTag.Alloc(C4dApi.Tpolygonselection);
//BaseSelect sel = st.GetBaseSelect();
//sel.Select(t.GetNodeID);
BaseTag joints = op2.GetTag(C4dApi.Tweights);
//this.wtagGlob = joints.Get
C4dApi.GePrint("wichtung setzen bones anzahl: "+this.wtagGlob.GetJointCount());
//Punkte der PolygonSelektion abrufen
//int pt = op2.GetTagDataCount(C4dApi.Tpolygonselection);
//C4dApi.GePrint("Anzahl der Punkte : " + pt);
//doc2.SetActiveObject(b2.GetObjectLink(SKELETT_OBJ_AUSWAHL, doc2));
SelectionTag st = SelectionTag.Alloc(C4dApi.Tpointselection);
BaseSelect bs = st.GetBaseSelect();
PointObject pObj = PointObject.GetPointObject(op2);
//pObj.GetPointS();
//for (int i = 0; i < pObj.GetPointCount(); i++)
//{
//}
C4dApi.GePrint("test"+bs.Select(0));
bs.Select(0);
BaseSelect SelectedPoints = pObj.GetPointS();
//for (BaseTag pointTag = op2.GetFirstTag(); pointTag; pointTag = pointTag.GetNext())
//{
// desc.id.GetAt(0).id = 1000;
// pointTag.Message(C4dApi.MSG_DESCRIPTION_COMMAND, desc);
//}
BaseTag btA = doc2.GetActiveTag();
C4dApi.GePrint("TypeName : "+btA.GetTypeName() +" Name "+btA.GetName());
if (btA.GetType() == C4dApi.Tpolygonselection)
{
for (int j = 0; j < wtagGlob.GetJointCount(); j++)
{
BaseObject JointName = wtagGlob.GetJoint(j, doc2);
if (btA.GetName() == JointName.GetName())
{
for (int i = 0; i < pObj.GetPointCount(); i++)
{
if (SelectedPoints.IsSelected(i))
{
this.wtagGlob.SetWeight(j, i, 0.04);
C4dApi.GePrint("Der Punkt mit dem Index " + i + " ist selektiert");
}
}
}
}
}
else { }
//C4dApi.GePrint("anzahl der pt " + pObj.GetPointCount());
//pObj.SetPointAt(1, new Vector3D(1, 2, 3));
//XPressoTag xt = XPressoTag.Alloc();
//xt = (BaseSelect)t;
// this.wtagGlob.SetWeight(1, 2, 1.0/100); //Setweeight 1.0 == 100 entspricht 0.42 == 42.0 entspricht Deshalb ist es einfacher direkt durch hundert zu teilen
break;
}
return true;
}
internal static HandleRef getCPtr(DescriptionCommand obj) {
return (obj == null) ? new HandleRef(null, IntPtr.Zero) : obj.swigCPtr;
}
public bool makeAnimalJoints(GeListNode node, DescriptionCommand desc)
{
CharakterAnimal Main = new CharakterAnimal(node, desc);
this.wtagGlob = Main.getwtagJoint();
return true;
}
public CharakterAnimal(GeListNode node, DescriptionCommand desc)
{
this.b = GetDataInstance(node);
this.button = desc.id.GetAt(0).id;
this.doc = C4dApi.GetActiveDocument();//Speichern aller Elemente im Dokument in die Variable doc
this.myMesh = b.GetObjectLink(SKELETT_OBJ_AUSWAHL, doc); //selektiertes Object in die Variable ObjSe speichern
this.mcd = new ModelingCommandData(this.doc, this.myMesh, this.myMesh.GetDataInstance(), MODELINGCOMMANDMODE.MODELINGCOMMANDMODE_ALL, MODELINGCOMMANDFLAGS.MODELINGCOMMANDFLAGS_CREATEUNDO, null, null);
/**
* Bisheriges speichern und in die Szene zeichnen
*/
C4dApi.EventAdd();
/**
* Wichtungstag definieren
*/
this.wtag = CAWeightTag.Alloc();
//this.wtagBaseTag = BaseTag.Alloc(C4dApi.Tweights);
/**
* Wichtungstag in das BaseObject einbauen
*/
this.myMesh.InsertTag(this.wtag);
/**
* Standard BaseObject vom Typ Joint erstellen, diese sind bei Menschen immer aktiv
*/
//Rückenknochen
BaseObject[] jointSpineArr = this.allocBonesSwing("Spine", this.myMesh, this.b.GetLong(SKELETT_RUECKENWIRBEL), new double3(50, -2, 0));
//Nackenknochen
BaseObject jointNeck = this.allocBonesCurveY("Neck", jointSpineArr[0], this.b.GetLong(SKELETT_HALSWIRBEL), new double3(-100, 0, 0));
//Kopf
BaseObject jointHead = this.allocJoint("Head", jointNeck, new double3(-100,0,0));
this.wtag.AddJoint(jointHead);
if (this.b.GetLong(SKELETT_BEINE) > 0)
{
this.addLegsFront(jointSpineArr[0]);
if (this.b.GetLong(SKELETT_BEINE) >= 3)
{
this.addLegsBack(jointSpineArr[1]);
}
}
//Schwanz
if (this.b.GetLong(SKELETT_RUECKENWIRBEL) > 0 && this.b.GetLong(SKELETT_SCHWANZ) > 0)
{
BaseObject parent = jointSpineArr[1];
for (int i = 0; i < this.b.GetLong(SKELETT_SCHWANZ); i++)
{
BaseObject jointTail = this.allocJoint("Tail_" + i, parent, new double3(100, -50, 0));
this.wtag.AddJoint(jointTail);
parent = jointTail;
}
}
/**
* Debug Ausgabe erstellen
*/
C4dApi.GePrint("Der Joint wurde angelegt");
jointSpineArr[0].GetTag(C4dApi.Tweights);
/**
* Skin Objekt einfügen
*/
BaseObject skin = BaseObject.Alloc(C4dApi.Oskin);
if (skin != null)
{
skin.InsertUnder(this.myMesh);
}
/**
* Zur Szene hinzufügen
*/
C4dApi.EventAdd();
C4dApi.GePrint("anzal der bones: " + this.wtag.GetJointCount());
doc.SetActiveObject(this.myMesh);//Selektiert das Model im OM
}