private void ExecuteCommandsAndCreateSinkFile(OutputWindow ow, CommandOutput lst, string seltext)//sending message and output to sink file
{
string objectname;
seltext = seltext.Replace('\n', ';').Replace('\r', ' ').Trim();
seltext = JoinCommaSeparatedStatment(seltext);
string stmt = "";
//////wrap in sink////////
string sinkfilefullpathname = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("tempsink"));//23nov2012
// load default value if no path is set or invalid path is set
if (sinkfilefullpathname.Trim().Length == 0 || !IsValidFullPathFilename(sinkfilefullpathname, false))
{
//sinkfilefullpathname = confService.DefaultSettings["tempsink"];
MessageBox.Show(this, "Key 'tempsink' not found in config file. Aborting...");
return;
}
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
string _command = string.Empty;//05May2013
int bskyfrmtobjcount = 0;
bool breakfor = false;//, continuefor=false;//14Nov2013
for (int start = 0, end = 0; start < seltext.Length; start = start + end + 1) //28Jan2013 final condition was start < seltext.Length-1
{
objectname = "";
end = seltext.IndexOf(';', start) - start;
if (end < 0) // if ; not found
end = seltext.IndexOf('\n', start) - start;
if (end < 0)// if new line not found
end = seltext.Length - start;
stmt = seltext.Substring(start, end).Replace('\n', ' ').Replace('\r', ' ').Trim();
if (stmt.Trim().Length < 1 || stmt.Trim().IndexOf('#') == 0)
continue;
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Syntax going to execute : " + stmt, LogLevelEnum.Info);
if (stmt.Trim().IndexOf('#') > 1) //12May2014 if any statment has R comments in the end in same line.
stmt = stmt.Substring(0, stmt.IndexOf("#"));
object o = null;
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Categorizing command before execution.", LogLevelEnum.Info);
_command = ExtractCommandName(stmt);//07sep2012
RCommandType rct = GetRCommandType(_command);
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Syntax command category : " + rct.ToString(), LogLevelEnum.Info);
try
{
switch (rct)
{
case RCommandType.CONDITIONORLOOP: //Block Commands
int end2 = end;
stmt = CurlyBracketParser(seltext, start, ref end);
if (stmt.Equals("ERROR"))
{
breakfor = true;
}
else
{
SendCommandToOutput(stmt, "R-Command");
ExecuteOtherCommand(ow, stmt);
}
//02Dec2014
ResetSink();
CloseSinkFile();
CreateOuput(ow);
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
///02Dec2015 Now add graphic (all of them, from temp location)
CreateAllGraphicOutput(ow);//get all grphics and send to output
break;
case RCommandType.GRAPHIC:
CommandRequest grpcmd = new CommandRequest();
grpcmd.CommandSyntax = "write(\"" + stmt.Replace("<", "<").Replace('"', '\'') + "\",fp)";// http://www.w3schools.com/xml/xml_syntax.asp
o = analytics.ExecuteR(grpcmd, false, false); //for printing command in file
CloseGraphicsDevice();
//GetGraphicSize()
ResetSink();
CloseSinkFile();
CreateOuput(ow);
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
OpenGraphicsDevice();//05May2013
//continuefor = true;
//continue;
break;
case RCommandType.GRAPHICXML:
ExecuteXMLTemplateDefinedCommands(stmt);
break;
case RCommandType.BSKYFORMAT:
ResetSink();
CloseSinkFile();
CreateOuput(ow);
SendCommandToOutput(stmt, "BSkyFormat");//26Aug2014 blue colored
ExecuteBSkyFormatCommand(stmt, ref bskyfrmtobjcount, ow); // this should be out of block and so "TRUE" must be passed in BSkyFormat
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
break;
case RCommandType.BSKYLOADREFRESHDATAFRAME: //BSkyLoadRefreshDataframe(dfname)
ResetSink();
CloseSinkFile();
CreateOuput(ow);
SendCommandToOutput(stmt, "Load-Refresh Dataframe");//26Aug2014 blue colored
bool success = ExecuteBSkyLoadRefreshDataframe(stmt);
if (!success)
SendErrorToOutput("Error:Cannot Load/Refresh Dataset. Dataframe does not exists. OR not 'data.frame' type.", ow); //03Jul2013
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
break;
case RCommandType.BSKYREMOVEREFRESHDATAFRAME: //BSkyRemoveRefreshDataframe(dfname)
ResetSink();
CloseSinkFile();
CreateOuput(ow);
ExecuteBSkyRemoveRefreshDataframe(stmt);
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
break;
case RCommandType.SPLIT: // set/remove split and refresh status bar in main window showing split vars
ResetSink();
CloseSinkFile();
CreateOuput(ow);
ExecuteSplit(stmt);
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
break;
case RCommandType.RCOMMAND:
SendCommandToOutput(stmt, "R-Command");
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Categorized. Before execution.", LogLevelEnum.Info);
ExecuteOtherCommand(ow, stmt);
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Categorized. After execution.", LogLevelEnum.Info);
ResetSink();
CloseSinkFile();
CreateOuput(ow);
OpenSinkFile(@sinkfilefullpathname, "wt");
SetSink();
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Categorized. Before getting graphic if any.", LogLevelEnum.Info);
///02Dec2015 Now add graphic (all of them, from temp location)
CreateAllGraphicOutput(ow);//get all grphics and send to output
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Categorized. After getting graphic if any.", LogLevelEnum.Info);
break;
case RCommandType.RDOTNET:
InitializeRDotNet();
RDotNetOpenDataset();
RDotNetExecute(ow);
DisposeRDotNet();
break;
default:
break;
}//switch
}
catch (Exception exc)
{
SendCommandToOutput(exc.Message, "Error:");
logService.WriteToLogLevel("Error executing: " + _command, LogLevelEnum.Error);
logService.WriteToLogLevel(exc.Message, LogLevelEnum.Error);
}
if (breakfor)
break;
}/////for
//////wrap in sink////////
ResetSink();
CloseSinkFile();
}
// reading back sink file and creating & displaying output; for non-BSkyFormat commands
private void CreateOuput(OutputWindow ow)
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Started creating output.", LogLevelEnum.Info);
//////////////////// for fetching BSkyFormat object Queue and process each object //////////////////////
int bskyformatobjectindex = 0;
bool bskyQFetched = false;
CommandRequest fetchQ = null;
string sinkfileBSkyFormatMarker = "[1] \"BSkyFormatInternalSyncFileMarker\"";
string sinkfileBSkyGraphicFormatMarker = "[1] \"BSkyGraphicsFormatInternalSyncFileMarker\""; //09Jun2015
//used to maintain the sequence of print in between BSkyFormats in case of block BSkyFormat
bool isBlockCommand = false;
//09Jun2015 used to maintain the sequence of print in between BSkyGraphicFormats in case of block commands
bool isBlockGraphicCommand = false;
//for deciding when to send output to output window in case of block BSkyFormat
//for block BSkyFormat we wait and create all different UI elements first so as to maintain sequence and then send them to output
//for non-block BSkFormat we send immediately after execution. No stacking up of UI elements ( AUXGrid, AUPara etc..)
bool isBlock = false;
////////////////////////////////////////////////////////////////////////////////////////////////////////
//if (true) return;
CommandOutput lst = new CommandOutput(); ////one analysis////////
CommandOutput grplst = new CommandOutput();//21Nov2013 Separate for Graphic. So Parent node name will be R-Graphic
lst.IsFromSyntaxEditor = true;//lst belongs to Syn Editor
if (saveoutput.IsChecked == true)//10Jan2013
lst.SelectedForDump = true;
XmlDocument xd = null;
//string auparas = "";
StringBuilder sbauparas = new StringBuilder("");
//////////////// Read output ans message from file and create output then display /////
//// read line by line /////
string sinkfilefullpathname = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("tempsink"));//23nov2012
// load default value if no path is set or invalid path is set
if (sinkfilefullpathname.Trim().Length == 0 || !IsValidFullPathFilename(sinkfilefullpathname, true))
{
MessageBox.Show(this, "Key 'tempsink' not found in config file. Aborting...");
return;
}
System.IO.StreamReader file = new System.IO.StreamReader(sinkfilefullpathname);// OpenSinkFile(@sinkfilefullpathname, "rt");
object linetext = null; string line;
bool insideblock = false;//20May2014
bool readSinkFile = true;
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Started reading sink", LogLevelEnum.Info);
//int imgcount = GraphicDeviceImageCounter;//couter that keeps track of how many images already got processed. Helps in creating a image filename.
while ((line = file.ReadLine()) != null)//(readSinkFile)
{
{
linetext = line;
}
if (linetext == null || linetext.ToString().Equals("EOF"))
{
break;
}
if (linetext != null && linetext.Equals("NULL") && lastcommandwasgraphic)//27May2015 to supress NULL for some listed graphic commands
{
continue;
}
if (linetext.ToString().Trim().Contains(sinkfileBSkyFormatMarker))//Contains("[1] \"BSkyFormat\"")) //14Jun2014 if it is BSkyFormat in block (read from sink file)
{
isBlockCommand = true;
}
else if (linetext.ToString().Trim().Contains(sinkfileBSkyGraphicFormatMarker))//Contains("[1] \"BSkyGraphicsFormat\"")) //09Jun2015 if it is BSkyGraphicsFormat in block (read from sink file)
{
isBlockGraphicCommand = true;
}
else
{
isBlockCommand = false;
}
//////// create XML doc /////////
if (linetext != null)//06May2013 we need formatting so we print blank lines.. && linetext.ToString().Length > 0)
{
/////// Trying to extract command from print //////
string commnd = linetext.ToString();
int opncurly = commnd.IndexOf("{");
int closcurly = commnd.IndexOf("}");
int lencommnd = closcurly - opncurly - 1;
if (opncurly != -1 && closcurly != -1)
commnd = commnd.Substring(opncurly + 1, lencommnd);//could be graphic or BSkyFormat in sink file.
if (false)//11Aug2015 fix for BSkyFormat not printed if inside R function. if (commnd.Contains("BSkyFormat("))//09Jun2015 || isGraphicCommand(_command)) // is BSKyFormat or isGraphic Command
{
SendToOutput(sbauparas.ToString(), ref lst, ow);//22May2014
sbauparas.Clear();
}
else if (isBlockCommand)//14Jun2014 for Block BSkyFormat.
{
if (sbauparas.Length > 0)
{
createAUPara(sbauparas.ToString(), lst);//Create & Add AUPara to lst
sbauparas.Clear();
}
}
else
{
if (sbauparas.Length < 1)
{
sbauparas.Append(linetext.ToString());//First Line of AUPara. Without \n
if (sbauparas.ToString().Trim().IndexOf("BSkyFormat(") == 0)//21Nov2013
lst.NameOfAnalysis = "BSkyFormat-Command";
}
else
{
//auparas = auparas.Replace("<", "<") + "\n" + linetext.ToString();//all lines separated by new line
sbauparas.Append("\n" + linetext.ToString());//all lines separated by new line
}
}
////for graphics//// //09Jun2015 This whole 'if' may not be needed
if (false)
{
SendToOutput(commnd, ref lst, ow);
//////////// Here is new code///////20May2014
CommandRequest grpcmd = new CommandRequest();
CloseGraphicsDevice();
OpenGraphicsDevice();//05May2013
grpcmd.CommandSyntax = commnd;// linetext.ToString();
analytics.ExecuteR(grpcmd, false, false);
CloseGraphicsDevice();
insideblock = true;
//////////////////////////////////////////////////////////////////////////////////
//// add auparas first to lst to maintain order///
if (sbauparas.Length > 0)
{
createAUPara(sbauparas.ToString(), lst);//Create & Add AUPara to lst and empty dommid
sbauparas.Clear();
}
////// now add image to lst ////
string synedtimg = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("sinkimage"));//23nov2012
/////03May2013 Create zero padding string //// %03d means 000, %04d means 0000
int percentindex = synedtimg.IndexOf("%");
int dindex = synedtimg.IndexOf("d", percentindex);
string percentstr = synedtimg.Substring(percentindex, (dindex - percentindex + 1));
string numbr = synedtimg.Substring(percentindex + 1, (dindex - percentindex - 1));
int zerocount = Convert.ToInt16(numbr);
string zeropadding = string.Empty;
for (int zeros = 1; zeros <= zerocount; zeros++)
{
zeropadding = zeropadding + "0";
}
int img_count = 0;//number of images to load in output
for (; ; )//03May2013 earlier there was no for loop for following code
{
img_count++;
string tempsynedtimg = synedtimg.Replace(percentstr, img_count.ToString(zeropadding));
// load default value if no path is set or invalid path is set
if (tempsynedtimg.Trim().Length == 0 || !IsValidFullPathFilename(tempsynedtimg, true))
{
break;
}
string source = @tempsynedtimg;
long imgsize = new FileInfo(synedtimg).Length;//find size of the imagefile
Image myImage = new Image();
///////////RequestCachePolicy uriCachePolicy = new RequestCachePolicy(RequestCacheLevel.CacheOnly);
var bitmap = new BitmapImage();
try
{
var stream = File.OpenRead(source);
bitmap.BeginInit();
bitmap.CacheOption = BitmapCacheOption.OnLoad;
bitmap.StreamSource = stream;
bitmap.EndInit();
stream.Close();
stream.Dispose();
myImage.Source = bitmap;
bitmap.StreamSource.Close(); //trying to close stream 03Feb2014
if (isBlockCommand)
createBSkyGraphic(myImage, lst); //20May2014 If graphic is inside block or loop
else
createBSkyGraphic(myImage, grplst); //if graphic is outside block or loop
DeleteFileIfPossible(@tempsynedtimg);
}
catch (Exception ex)
{
logService.WriteToLogLevel("Error reading Image file " + source + "\n" + ex.Message, LogLevelEnum.Error);
MessageBox.Show(this, ex.Message);
}
}
if (img_count < 1) ////03May2013 if no images were added to output lst. then return.
{
return;
}
}
if (isBlockGraphicCommand)//for block graphics //09Jun2015
{
CloseGraphicsDevice();
insideblock = true;
////// now add image to lst ////
string synedtimg = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("sinkimage"));//23nov2012
/////03May2013 Create zero padding string //// %03d means 000, %04d means 0000
int percentindex = synedtimg.IndexOf("%");
int dindex = synedtimg.IndexOf("d", percentindex);
string percentstr = synedtimg.Substring(percentindex, (dindex - percentindex + 1));
string numbr = synedtimg.Substring(percentindex + 1, (dindex - percentindex - 1));
int zerocount = Convert.ToInt16(numbr);
string zeropadding = string.Empty;
for (int zeros = 1; zeros <= zerocount; zeros++)
{
zeropadding = zeropadding + "0";
}
{
GraphicDeviceImageCounter++;//imgcount++;
string tempsynedtimg = synedtimg.Replace(percentstr, GraphicDeviceImageCounter.ToString(zeropadding));
// load default value if no path is set or invalid path is set
if (tempsynedtimg.Trim().Length == 0 || !IsValidFullPathFilename(tempsynedtimg, true))
{
isBlockGraphicCommand = false; //09Jun2015 reset, as we dont know what next command is. May or may not be graphic marker
// not needed if one graphic for one graphic marker imgcount--;
break;
}
string source = @tempsynedtimg;
Image myImage = new Image();
var bitmap = new BitmapImage();
try
{
var stream = File.OpenRead(source);
bitmap.BeginInit();
bitmap.CacheOption = BitmapCacheOption.OnLoad;
bitmap.StreamSource = stream;
bitmap.EndInit();
stream.Close();
stream.Dispose();
myImage.Source = bitmap;
bitmap.StreamSource.Close(); //trying to close stream 03Feb2014
if (isBlockGraphicCommand)
createBSkyGraphic(myImage, lst); //20May2014 If graphic is inside block or loop
else
createBSkyGraphic(myImage, grplst); //if graphic is outside block or loop
DeleteFileIfPossible(@tempsynedtimg);
}
catch (Exception ex)
{
logService.WriteToLogLevel("Error reading Image file " + source + "\n" + ex.Message, LogLevelEnum.Error);
MessageBox.Show(this, ex.Message);
}
}
if (GraphicDeviceImageCounter < 1) ////03May2013 if no images were added to output lst. then return.
{
sbauparas.Clear();//resetting
isBlockGraphicCommand = false;
return;
}
sbauparas.Clear();//resetting
isBlockGraphicCommand = false;
}
else if (isBlockCommand)// (linetext.ToString().Trim().Contains("[1] \"BSkyFormat\""))//21may2014
{
int bskyfrmtobjcount = 0;
if (!bskyQFetched)
{
fetchQ = new CommandRequest();
fetchQ.CommandSyntax = "BSkyQueue = BSkyGetHoldFormatObjList()";// Fetch Queue object
analytics.ExecuteR(fetchQ, false, false);
fetchQ.CommandSyntax = "is.null(BSkyQueue)";// check if Queue is null
object o = analytics.ExecuteR(fetchQ, true, false);//return false or true
if (o.ToString().ToLower().Equals("false"))//Queue has elements
{
bskyQFetched = true;
}
}
if (bskyQFetched)
{
bskyformatobjectindex++;
commnd = "BSkyFormat(BSkyQueue[[" + bskyformatobjectindex + "]])";
ExecuteSinkBSkyFormatCommand(commnd, ref bskyfrmtobjcount, lst);
lst = new CommandOutput();//"Child already has parent" error, fix
isBlock = true;
}
isBlockCommand = false;//09Jun2015 next command may or may not be BSkyFormat marker.
}
}//if linetext!null
}//while EOF sink file
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Finished reading sink", LogLevelEnum.Info);
file.Close(); //CloseSinkFile();
SendToOutput(sbauparas.ToString(), ref lst, ow, isBlock);//send output to window or disk file
SendToOutput(null, ref grplst, ow, isBlock);//21Nov2013. separate node for graphic
if (lst != null && lst.Count > 0 && isBlock) // Exceutes when there is block command
{
sessionlst.Add(lst);//15Nov2013
lst = new CommandOutput();//after adding to session new object is allocated for futher output creation
}
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Finished creating output.", LogLevelEnum.Info);
}
//For Painting Output window for BSKyFormated object. And/Or to refresh datagrid for non-analytics commands like sort, compute
private void RefreshOutputORDataset(string objectname, CommandRequest cmd, string originalCommand, OutputWindow ow)
{
UAMenuCommand uamc = new UAMenuCommand();
cmd.CommandSyntax = "is.null(" + objectname + "$BSkySplit)";//$BSkySplit or $split in return structure
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
// is it just a list(non Bsky) or its a list that contains tables (user tables or Bsky Stat result tables)
bool isNonBSkyList = false;
object isNonBSkyListstr = analytics.ExecuteR(cmd, true, false);
if (isNonBSkyListstr != null && isNonBSkyListstr.ToString().ToLower().Equals("true"))
{
isNonBSkyList = true;
}
if (isNonBSkyList)
{
string ewmessage = "This Object cannot be formatted using BSKyFormat. BSkyFormat can be used on Array, Matrix, Data Frame and BSky List objects only.";
SendErrorToOutput(ewmessage, ow);//03Jul2013
return;
}
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: $BSkySplit Result (false means non-bsky list): " + isNonBSkyList, LogLevelEnum.Info);
cmd.CommandSyntax = objectname + "$uasummary[[7]]";
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
string bskyfunctioncall = (string)analytics.ExecuteR(cmd, true, false);//actual call with values
if (bskyfunctioncall == null)
{
bskyfunctioncall = ""; //24Apr2014 This is when no Dataset is open. And Syntax editor is open.Not returning, instead putting blank.
}
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: $uasummary[[7]] Result : " + bskyfunctioncall, LogLevelEnum.Info);
string bskyfunctionname = "";
if (bskyfunctioncall.Length > 0)
{
if (bskyfunctioncall.Contains("("))
bskyfunctionname = bskyfunctioncall.Substring(0, bskyfunctioncall.IndexOf('(')).Trim();
else
bskyfunctionname = bskyfunctioncall;
}
uamc.commandformat = objectname;// object that stores the result of analysis
uamc.bskycommand = bskyfunctioncall.Replace('\"', '\'');// actual BSkyFunction call. " quotes replaced by '
uamc.commandoutputformat = bskyfunctionname.Length > 0 ? string.Format(@"{0}", BSkyAppData.BSkyDataDirConfigBkSlash) + bskyfunctionname + ".xml" : "";//23Apr2015
uamc.commandtemplate = bskyfunctionname.Length > 0 ? string.Format(@"{0}", BSkyAppData.BSkyDataDirConfigBkSlash) + bskyfunctionname + ".xaml" : "";//23Apr2015
uamc.commandtype = originalCommand;
CommandExecutionHelper auacb = new CommandExecutionHelper();
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: CommandExecutionHelper: " , LogLevelEnum.Info);
auacb.ExecuteSyntaxEditor(uamc, saveoutput.IsChecked == true ? true : false);//10JAn2013 edit
auacb = null;
}
//22Nov2013 for sending session contents to output window.
//This gives us control to send output each time "RUN" is clicked and for batch command
//this method can be called when last slice contents get appended to sessionlist
public void DisplayAllSessionOutput(string sessionheader = "", OutputWindow selectedOW=null)//06May2015 slectedOW param added
{
sessionlst.NameOfSession = sessionheader;
sessionlst.isRSessionOutput = true;
//if (sessionheader.Trim().Length > 1)
if(sessionlst.Count>0)//07Nov2014
{
if (selectedOW == null)
{
//for dialog batch commads say 'lm' sessionheader will have some dialog title like 'lm'
ow.AddSynEdtSessionOutput(sessionlst);//send output to 'Active' marked output window.
}
else
{
selectedOW.AddSynEdtSessionOutput(sessionlst);//send output to specific window from where command was executed
}
}
sessionlst = new SessionOutput();//28Nov2013 for creating new instance and not deleting old one
}
private void SendErrorToOutput(string ewmessage, OutputWindow ow) //03Jul2013 error warning message
{
object o;
CommandRequest cmd = new CommandRequest();
string sinkfilefullpathname = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("tempsink"));//23nov2012
// load default value if no path is set or invalid path is set
if (sinkfilefullpathname.Trim().Length == 0 || !IsValidFullPathFilename(sinkfilefullpathname, false))
{
MessageBox.Show(this, "Key 'tempsink' not found in config file. Aborting...");
return;
}
OpenSinkFile(@sinkfilefullpathname, "wt"); //06sep2012
SetSink(); //06sep2012
cmd.CommandSyntax = "write(\"" + ewmessage + ".\",fp)";// command
o = analytics.ExecuteR(cmd, false, false);
ResetSink();//06sep2012
CloseSinkFile();//06sep2012
CreateOuput(ow);//06sep2012
}
private void ExecuteOtherCommand(OutputWindow ow, string stmt)
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Before Executing in R.", LogLevelEnum.Info);
#region Check open close brackets before executing
string unbalmsg;
if (!AreBracketsBalanced(stmt, out unbalmsg))//if unbalanced brackets
{
CommandRequest errmsg = new CommandRequest();
string fullmsg = "Error : " + unbalmsg;
errmsg.CommandSyntax = "write(\"" + fullmsg.Replace("<", "<").Replace('"', '\'') + "\",fp)";//
analytics.ExecuteR(errmsg, false, false); //for printing command in file
return;
}
#endregion
///if command is for loading dataset //
if (stmt.Contains("UAloadDataset"))
{
int indexofopening = stmt.IndexOf('(');
int indexofclosing = stmt.IndexOf(')');
string[] parameters = stmt.Substring(indexofopening + 1, indexofclosing - indexofopening - 2).Split(',');
string filename = string.Empty;
foreach (string s in parameters)
{
if (s.Contains('/') || s.Contains('\\'))
filename = s.Replace('\"', ' ').Replace('\'', ' ');
}
if (filename.Contains("="))
{
filename = filename.Substring(filename.IndexOf("=") + 1);
}
FileOpenCommand fo = new FileOpenCommand();
fo.FileOpen(filename.Trim());
return;
}
object o = null;
CommandRequest cmd = new CommandRequest();
if (stmt.Contains("BSkySortDataframe(") ||
stmt.Contains("BSkyComputeExpression(") || stmt.Contains("BSkyRecode("))
{
CommandExecutionHelper auacb = new CommandExecutionHelper();
UAMenuCommand uamc = new UAMenuCommand();
uamc.bskycommand = stmt;
uamc.commandtype = stmt;
auacb.ExeuteSingleCommandWithtoutXML(stmt);//auacb.ExecuteSynEdtrNonAnalysis(uamc);
auacb.Refresh_Statusbar();
//auacb = null;
}
else
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing in R.", LogLevelEnum.Info);
isVariable(ref stmt);///for checking if its variable then it must be enclosed within print();
//27May2015 check if command is graphic and get its height width and then reopen graphic device with new dimensions
if (lastcommandwasgraphic)//listed graphic
{
if (imgDim!=null && imgDim.overrideImgDim)
{
CloseGraphicsDevice();
OpenGraphicsDevice(imgDim.imagewidth, imgDim.imageheight); // get image dimenstion from external source for this particular graphic.
}
}
cmd.CommandSyntax = stmt;// command
o = analytics.ExecuteR(cmd, false, false); //// get Direct Result and write in sink file
CommandRequest cmdprn = new CommandRequest();
if (o != null && o.ToString().Contains("Error"))//for writing some of the errors those are not taken care by sink.
{
cmdprn.CommandSyntax = "write(\"" + o.ToString() + "\",fp)";// http://www.w3schools.com/xml/xml_syntax.asp
o = analytics.ExecuteR(cmdprn, false, false); /// for printing command in file
///if there is error in assignment, like RHS caused error and LHS var is never updated
///Better make LHS var null.
string lhvar = string.Empty;
GetLeftHandVar(stmt, out lhvar);
if (lhvar != null)
{
cmd.CommandSyntax = lhvar+" <- NULL";// assign null
o = analytics.ExecuteR(cmd, false, false);
}
}
}
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: After Executing in R.", LogLevelEnum.Info);
}
private void RDotNetExecute(OutputWindow ow)
{
CommandOutput lst = new CommandOutput();
lst.IsFromSyntaxEditor = true;
engine.Evaluate("BSky_One_Way_Anova = as.data.frame (summary(dd <- aov(mpg ~ year,data=Dataset1))[[1]])");
engine.Evaluate("bskyfrmtobj <- BSkyFormat(BSky_One_Way_Anova)");
CharacterMatrix cmatrix = engine.Evaluate("bskyfrmtobj").AsCharacterMatrix();
string[,] mtx = new string[cmatrix.RowCount, cmatrix.ColumnCount];
for (int r = 0; r < cmatrix.RowCount; r++)
{
for (int c = 0; c < cmatrix.ColumnCount; c++)
{
mtx[r, c] = cmatrix[r, c];
}
}
string objectname = "bskyfrmtobj";
string headername = "This is generated in R.NET";
CommandRequest cmddf = new CommandRequest();
int dimrow = 1, dimcol = 1;
bool rowexists = false, colexists = false;
string dataclassname = string.Empty;
//Find class of data passed. data.frame, matrix, or array
cmddf.CommandSyntax = "class(" + objectname + ")"; // Row exists
object retres = engine.Evaluate(cmddf.CommandSyntax).AsCharacter()[0];
if (retres != null)
dataclassname = retres.ToString();
//find if dimension exists
cmddf.CommandSyntax = "!is.na(dim(" + objectname + ")[1])"; // Row exists
rowexists = engine.Evaluate(cmddf.CommandSyntax).AsLogical()[0];
cmddf.CommandSyntax = "!is.na(dim(" + objectname + ")[2])";// Col exists
colexists = engine.Evaluate(cmddf.CommandSyntax).AsLogical()[0];
/// Find size of matrix(objectname) & initialize data array ///
if (rowexists)
{
cmddf.CommandSyntax = "dim(" + objectname + ")[1]";
retres = engine.Evaluate(cmddf.CommandSyntax).AsInteger()[0];
if (retres != null)
dimrow = Int16.Parse(retres.ToString());
}
if (colexists)
{
cmddf.CommandSyntax = "dim(" + objectname + ")[2]";
retres = engine.Evaluate(cmddf.CommandSyntax).AsInteger()[0];
if (retres != null)
dimcol = Int16.Parse(retres.ToString());
}
string[,] data = new string[dimrow, dimcol];
//// now create FlexGrid and add to lst ///
/////////finding Col headers /////
cmddf.CommandSyntax = "colnames(" + objectname + ")";
CharacterVector colhdrobj = engine.Evaluate(cmddf.CommandSyntax).AsCharacter();
string[] colheaders;
if (colhdrobj != null && !colhdrobj.ToString().Contains("Error"))
{
if (true)//colhdrobj.GetType().IsArray)
{
int siz = colhdrobj.Count();
colheaders = new string[siz];
for (int ri = 0; ri < siz; ri++)
{
colheaders[ri] = colhdrobj[ri];
}
}
else
{
colheaders = new string[1];
colheaders[0] = colhdrobj.ToString();
}
}
else
{
colheaders = new string[dimcol];
for (int i = 0; i < dimcol; i++)
colheaders[i] = (i + 1).ToString();
}
/////////finding Row headers /////
//read configuration and then decide to pull row headers
bool shownumrowheaders = true; ///
cmddf.CommandSyntax = "rownames(" + objectname + ")";
CharacterVector rowhdrobj = engine.Evaluate(cmddf.CommandSyntax).AsCharacter();
string[] rowheaders;// = (string[])rowhdrobj;//{ "11", "22", "33" };
if (rowhdrobj != null && !rowhdrobj.ToString().Contains("Error"))
{
if (true)//rowhdrobj.GetType().IsArray)
{
int siz = rowhdrobj.Count();
rowheaders = new string[siz];
for (int ri = 0; ri < siz; ri++)
{
rowheaders[ri] = rowhdrobj[ri];
}
//rowheaders = (string[])rowhdrobj;//{ "Aa", "Bb", "Cc" };//
}
else
{
rowheaders = new string[1];
rowheaders[0] = rowhdrobj.ToString();
}
}
else
{
rowheaders = new string[dimrow];
//Type 1.//filling number for row header if rowheader is not present
for (int i = 0; i < dimrow; i++)
rowheaders[i] = (i + 1).ToString();
}
bool isnumericrowheaders = true; // assuming that row headers are numeric
short tnum;
for (int i = 0; i < dimrow; i++)
{
if (!Int16.TryParse(rowheaders[i], out tnum))
{
isnumericrowheaders = false; //row headers are non-numeric
break;
}
//if (i == 10)//just cheking first 10 numbers for being int. Not cheking all the row headers.
// break;
}
if (isnumericrowheaders && !shownumrowheaders)
{
//Type 2.//filling empty values for row header if rowheader is not present
for (int i = 0; i < dimrow; i++)
rowheaders[i] = "";
}
/// Populating array using data frame data
bool isRowEmpty = true;//for Virtual.
int emptyRowCount = 0;//for Virtual.
List<int> emptyRowIndexes = new List<int>(); //for Virtual.
string cellData = string.Empty;
for (int r = 1; r <= dimrow; r++)
{
isRowEmpty = true;//for Virtual.
for (int c = 1; c <= dimcol; c++)
{
if (dimcol == 1 && !dataclassname.ToLower().Equals("data.frame"))
cmddf.CommandSyntax = "as.character(" + objectname + "[" + r + "])";
else
cmddf.CommandSyntax = "as.character(" + objectname + "[" + r + "," + c + "])";
object v = engine.Evaluate(cmddf.CommandSyntax).AsCharacter()[0];
cellData = (v != null) ? v.ToString().Trim() : "";
data[r - 1, c - 1] = cellData;// v.ToString().Trim();
//for Virtual. // cell is non-empty in row, means row is non empty because of atleast 1 col
if (cellData.Length > 0)
isRowEmpty = false;
}
//for Virtual. // counting empty rows for virtual
if (isRowEmpty)
{
emptyRowCount++;
emptyRowIndexes.Add(r - 1);//making it zero based as in above nested 'for'
}
}
// whether you want C1Flexgrid to be generated by using XML DOM or by Virtual class(Dynamic)
bool DOMmethod = false;
if (DOMmethod)
{
//12Aug2014 Old way of creating grid using DOM and then creating and filling grid step by step
XmlDocument xdoc = createFlexGridXmlDoc(colheaders, rowheaders, data);
//string xdoc = "<html><body><table><thead><tr><th class=\"h\"></th><th class=\"c\">A</th><th class=\"c\">B</th></tr></thead><tbody><tr><td class=\"h\">X</td><td class=\"c\">5</td><td class=\"c\">6</td></tr><tr><td class=\"h\">Y</td><td class=\"c\">8</td><td class=\"c\">9</td></tr></tbody></table></body></html>";
createFlexGrid(xdoc, lst, headername);// headername = 'varname' else 'leftvarname' else 'objclass'
}
else//virutal list method
{
//There is no logic to remove empty rows in this vitual list method so
//here we try to send data with non-empty rows by dropping empty ones first.
if (emptyRowCount > 0)
{
int nonemptyrowcount = dimrow - emptyRowCount;
string[,] nonemptyrowsdata = new string[nonemptyrowcount, dimcol];
string[] nonemptyrowheaders = new string[nonemptyrowcount];
for (int rr = 0, rrr = 0; rr < data.GetLength(0); rr++)
{
if (emptyRowIndexes.Contains(rr))//skip empty rows.
continue;
for (int cc = 0; cc < data.GetLength(1); cc++)
{
nonemptyrowsdata[rrr, cc] = data[rr, cc];//only copy non-empty rows
}
nonemptyrowheaders[rrr] = rowheaders[rr];//copying row headers too.
rrr++;
}
//Using Dynamic Class creation and then populating the grid. //12Aug2014
CreateDynamicClassFlexGrid(headername, colheaders, nonemptyrowheaders, nonemptyrowsdata, lst);
}
else
{
//Using Dynamic Class creation and then populating the grid. //12Aug2014
CreateDynamicClassFlexGrid(headername, colheaders, rowheaders, data, lst);
}
}
if (ow != null)//22May2014
SendToOutput("", ref lst, ow);//send dataframe/matrix/array to output window or disk file
}
//No Need of following. Logic changed
//15Apr2014. List location 1 will have listname and number of tables it caontains. Location 2 onwards are tables. 1 table per location.
private void FormatBSkyList2(CommandOutput lst, string objectname, string headername, OutputWindow ow) // for BSky list2 processing
{
MessageBox.Show(this, "BSkyList2 Processing... close this box");
}
private void ExecuteBSkyFormatCommand(string stmt, ref int bskyfrmtobjcount, OutputWindow ow)
{
KillTempBSkyFormatObj("bskytempvarname");
KillTempBSkyFormatObj("bskyfrmtobj");
string originalCommand = stmt;
CommandOutput lst = new CommandOutput(); ////one analysis////////
lst.IsFromSyntaxEditor = true;//lst belongs to Syn Editor
if (saveoutput.IsChecked == true)//10Jan2013
lst.SelectedForDump = true;
object o;
CommandRequest cmd = new CommandRequest();
/// find argument passed in BSkyFormat(argu) and var name ////
/// eg.. BSkyFormat(osmt <-one.smt.t.test(....) )
/// subcomm will be : osmt<-one.smt.t.test(....)
/// varname will be : osmt
string subcomm = string.Empty, varname = string.Empty, BSkyLeftVar = string.Empty, headername = string.Empty;
string firstparam = string.Empty, restparams = string.Empty, leftvarname = string.Empty;//23Sep2014
string userpassedtitle = string.Empty;
//SplitBSkyFormat(stmt, out subcomm, out varname, out BSkyLeftVar);
SplitBSkyFormatParams(stmt, out firstparam, out restparams, out userpassedtitle);//23Spe2014
if (userpassedtitle.Trim().Length > 0)//user passed title has the highest priority
{
headername = userpassedtitle.Trim();
}
{
//23Sep2014 if firstParam is of the type obj<-OSMT(...) OR obj<-obj2
if (firstparam.Contains("<-") || firstparam.Contains("=")) //if it has assignment
{
int idxassign=-1, idxopenbrket=-1;
if(firstparam.Contains("("))// if obj<-OSMT(...)
{
idxopenbrket = firstparam.IndexOf("(");
string firsthalf = firstparam.Substring(0,idxopenbrket);// "obj <- OSMT("
idxassign = firsthalf.IndexOf("<-");
if (idxassign == -1)// '<-' not present(found in half)
idxassign = firsthalf.IndexOf("=");
}
if (idxassign > -1 && idxopenbrket > -1 && idxopenbrket > idxassign)
{
leftvarname = firstparam.Substring(0, idxassign);
headername = leftvarname.Trim();
cmd.CommandSyntax = firstparam;// command: osmt<-one.smt.tt(...)
o = analytics.ExecuteR(cmd, false, false);//executing sub-command; osmt<-one.smt.tt(...)
}
else if (idxopenbrket < 0 )//type obj <- obj2
{
idxassign = firstparam.IndexOf("<-");
if (idxassign == -1)// '<-' not present
idxassign = firstparam.IndexOf("=");
if (idxassign > -1)//if assignment is there
{
leftvarname = firstparam.Substring(0, idxassign);
headername = leftvarname.Trim();
cmd.CommandSyntax = firstparam;// command: osmt<-one.smt.tt(...)
o = analytics.ExecuteR(cmd, false, false);//executing sub-command; osmt<-one.smt.tt(...)
}
}
}
/////25Feb2013 for writing errors in OutputWindow////
string sinkfilefullpathname = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("tempsink")); //23nov2012
// load default value if no path is set or invalid path is set
if (sinkfilefullpathname.Trim().Length == 0 || !IsValidFullPathFilename(sinkfilefullpathname, false))
{
MessageBox.Show(this, "Key 'tempsink' not found in config file. Aborting...");
return; //return type was void before 22May2014
}
OpenSinkFile(@sinkfilefullpathname, "wt"); //06sep2012
SetSink(); //06sep2012
////////////////////////////////////////////////////////////////////////
//13Aug2012 headername = findHeaderName(subcomm); // data.frame / matrix / array header
varname = "bskytempvarname";
KillTempBSkyFormatObj(varname);
//Now run command
firstparam = (leftvarname.Trim().Length>0? leftvarname : firstparam);
//23Sep2014 cmd.CommandSyntax = varname + " <- " + subcomm;// command: varname <- one.smt.tt(...)
cmd.CommandSyntax = varname + " <- " + firstparam;// varname <- obj OR OSMT()
o = analytics.ExecuteR(cmd, false, false);//executing sub-command
////////////////////////////////////////////////////////////////////////
/////25Feb2013 for writing errors in OutputWindow////
ResetSink();
CloseSinkFile();
CreateOuput(ow);
}
//if var does not exists then there could be error in command execution.
cmd.CommandSyntax = "exists('" + varname + "')";
o = analytics.ExecuteR(cmd, true, false);
if (o.ToString().ToLower().Equals("false"))//possibly some error occured
{
string ewmessage = "Object cannot be formatted using BSKyFormat. Object: " + firstparam + ", does not exists.";
//if (ow != null)//22May2014
SendErrorToOutput(originalCommand + "\n" + ewmessage, ow); //03Jul2013
return; //return type was void before 22May2014
}
//Check if varname is null
cmd.CommandSyntax = "is.null(" + varname + ")";
o = analytics.ExecuteR(cmd, true, false);
if (o.ToString().ToLower().Equals("true"))//possibly some error occured
{
string ewmessage = "Object cannot be formatted using BSKyFormat. Object: " + firstparam + ", is null.";
SendErrorToOutput(originalCommand + "\n" + ewmessage, ow); //03Jul2013
return; //return type was void before 22May2014
}
//setting up flag for showing default ("1","2","3" )row headers.
//This will not work if BSkyReturnStructure is returned(in varname).
bsky_no_row_header = false;
cmd.CommandSyntax = "is.null(row.names(" + varname + ")[1])";
o = analytics.ExecuteR(cmd, true, false);
if (o.ToString().ToLower().Equals("false"))//row name at [1] exists
{
cmd.CommandSyntax = "row.names(" + varname + ")[1]";
o = analytics.ExecuteR(cmd, true, false);
if (o.ToString().Trim().ToLower().Equals("bsky_no_row_header"))
{
bsky_no_row_header = true;
}
}
//one mandatory parameter
string mandatoryparamone = ", bSkyFormatAppRequest = TRUE";
if (restparams.Trim().Length > 0 && restparams.Trim().Contains("bSkyFormatAppRequest"))//if parameter is already present, no need to add it.
{
mandatoryparamone = string.Empty;
}
//second mandatory parameter
string mandatoryparamtwo = ", singleTableOutputHeader = '" + headername + "'"; // \"c(\\\"a\\\")\" )"
if (restparams.Trim().Length > 0 && restparams.Trim().Contains("singleTableOutputHeader"))//if parameter is already present, no need to add it.
{
mandatoryparamtwo = string.Empty;
}
//create BSkyFormat command for execution and execute
if(restparams.Trim().Length > 0)
stmt = "BSkyFormat(" + varname + mandatoryparamone + mandatoryparamtwo +","+restparams+")";//stmt = "BSkyFormat(" + varname + ")";
else
stmt = "BSkyFormat(" + varname + mandatoryparamone + mandatoryparamtwo+" )";
stmt = BSkyLeftVar + stmt;// command is BSkyLeftVar <- BSkyFormat(varname)
/// BSkyLeftVar <- can be blank if user has no assigned leftvar to BSkyFormat
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Command reconstructed : " + stmt, LogLevelEnum.Info);
string objclass = "", objectname = "";
if (stmt.Contains("BSkyFormat("))// Array, Matrix, Data Frame or BSkyObject(ie..Analytic commands)
{
bskyfrmtobjcount++;
stmt = "bskyfrmtobj <- " + stmt; // BSkyFormat has BSkyFormat2 call inside of it
objectname = "bskyfrmtobj";// +bskyfrmtobjcount.ToString();
cmd.CommandSyntax = stmt;// command
o = analytics.ExecuteR(cmd, false, false);//executing BSkyFormat
///Check if returned object is null
cmd.CommandSyntax = "is.null(" + objectname + ")";
o = analytics.ExecuteR(cmd, true, false);
if (o.ToString().ToLower().Equals("true"))//possibly some error occured
{
string ewmessage = "Object cannot be formatted using BSKyFormat. Type not supported. Supported types are :\n array, matrix dataframe and BSky return structure.";
SendErrorToOutput(originalCommand + "\n" + ewmessage, ow); //03Jul2013
return; //return type was void before 22May2014
}
#region Generate UI for data.frame/ matrix / array and analytics commands
if (BSkyLeftVar.Trim().Length < 1) // if left var does not exists then generate UI tables
{
lst.NameOfAnalysis = originalCommand.Contains("BSkyFormat") ? "BSkyFormat-Command" : originalCommand;
//cmd.CommandSyntax = "class(bskyfrmtobj" + bskyfrmtobjcount.ToString() + ")";
cmd.CommandSyntax = "class(bskyfrmtobj)";
objclass = (string)analytics.ExecuteR(cmd, true, false);
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: BSkyFormat object type : " + objclass, LogLevelEnum.Info);
if (objclass.ToString().ToLower().Equals("data.frame") || objclass.ToString().ToLower().Equals("matrix") || objclass.ToString().ToLower().Equals("array"))
{
if (headername != null && headername.Trim().Length < 1) //06May2014
headername = subcomm;
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: BSkyFormatting DF/Matrix/Arr : " + objclass, LogLevelEnum.Info);
BSkyFormatDFMtxArr(lst, objectname, headername, ow);
}
else if (objclass.ToString().ToLower().Equals("list"))//BSkyObject returns "list"
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: BSkyFormatting : " + objclass, LogLevelEnum.Info);
SendToOutput("", ref lst, ow);
///tetsing whole else if
objectname = "bskyfrmtobj";// +bskyfrmtobjcount.ToString();
cmd.CommandSyntax = "is.null(" + objectname + "$BSkySplit)";//$BSkySplit or $split in return structure
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
bool isNonBSkyList1=false;
object isNonBSkyList1str = analytics.ExecuteR(cmd, true, false);
if (isNonBSkyList1str != null && isNonBSkyList1str.ToString().ToLower().Equals("true"))
{
isNonBSkyList1 = true;
}
cmd.CommandSyntax = "is.null(" + objectname + "$list2name)";//another type pf BSky list
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
bool isNonBSkyList2=false ;
object isNonBSkyList2str = analytics.ExecuteR(cmd, true, false);
if (isNonBSkyList2str != null && isNonBSkyList2str.ToString().ToLower().Equals("true"))
{
isNonBSkyList2 = true;
}
if (!isNonBSkyList1)
{
//if there was error in execution, say because non scale field has scale variable
// so now if we first check if $executionstatus = -2, we know that some error has occured.
cmd.CommandSyntax = objectname + "$executionstatus";//$BSkySplit or $split in return structure
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
object errstat = analytics.ExecuteR(cmd, true, false);
if (errstat != null && (errstat.ToString().ToLower().Equals("-2") || errstat.ToString().ToLower().Equals("-1")))
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Execution Stat : " + errstat, LogLevelEnum.Info);
if(errstat.ToString().ToLower().Equals("-2"))
SendErrorToOutput("Critical Error Occurred!", ow);//15Jan2015
else
SendErrorToOutput("Error Occurred!", ow);//03Jul2013
}
cmd.CommandSyntax = objectname + "$nooftables";//$nooftables=0, means no data to display. Not even error warning tables are there.
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Executing : " + cmd.CommandSyntax, LogLevelEnum.Info);
object retval = analytics.ExecuteR(cmd, true, false);
if (retval != null && retval.ToString().ToLower().Equals("0"))
{
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: No of Tables : " + retval, LogLevelEnum.Info);
SendErrorToOutput("No tables to show in output!", ow);//03Jul2013
}
if (AdvancedLogging) logService.WriteToLogLevel("ExtraLogs: Start creating actual UI tables : ", LogLevelEnum.Info);
//finally we can now format the tables of BSkyReturnStruture list
RefreshOutputORDataset(objectname, cmd, originalCommand, ow); //list like one sample etc..
}
else if (!isNonBSkyList2)
{
//if (ow != null)//22May2014
FormatBSkyList2(lst, objectname, headername, ow); //list that contains tables 2nd location onwards
}
}
else // invalid format
{
/// put it in right place
string ewmessage = "This Object cannot be formatted using BSKyFormat. BSkyFormat can be used on Array, Matrix, Data Frame and BSky List objects only";
//if (ow != null)//22May2014
SendErrorToOutput(originalCommand + "\n" + ewmessage, ow);//03Jul2013
}
}/// if leftvar is not assigned generate UI
#endregion
}
return;//22May2014
}
//pulled out from ExecuteBSkyFromatCommand() method above. For BskyFormat DataFrame Matrix Array
private void BSkyFormatDFMtxArr(CommandOutput lst, string objectname, string headername, OutputWindow ow)
{
CommandRequest cmddf = new CommandRequest();
int dimrow = 1, dimcol = 1;
bool rowexists = false, colexists = false;
string dataclassname = string.Empty;
//Find class of data passed. data.frame, matrix, or array
cmddf.CommandSyntax = "class(" + objectname + ")"; // Row exists
object retres = analytics.ExecuteR(cmddf, true, false);
if (retres != null)
dataclassname = retres.ToString();
//find if dimension exists
cmddf.CommandSyntax = "!is.na(dim(" + objectname + ")[1])"; // Row exists
retres = analytics.ExecuteR(cmddf, true, false);
if (retres != null && retres.ToString().ToLower().Equals("true"))
rowexists = true;
cmddf.CommandSyntax = "!is.na(dim(" + objectname + ")[2])";// Col exists
retres = analytics.ExecuteR(cmddf, true, false);
if (retres != null && retres.ToString().ToLower().Equals("true"))
colexists = true;
/// Find size of matrix(objectname) & initialize data array ///
if (rowexists)
{
cmddf.CommandSyntax = "dim(" + objectname + ")[1]";
retres = analytics.ExecuteR(cmddf, true, false);
if (retres != null)
dimrow = Int16.Parse(retres.ToString());
}
if (colexists)
{
cmddf.CommandSyntax = "dim(" + objectname + ")[2]";
retres = analytics.ExecuteR(cmddf, true, false);
if (retres != null)
dimcol = Int16.Parse(retres.ToString());
}
string[,] data = new string[dimrow, dimcol];
//// now create FlexGrid and add to lst ///
/////////finding Col headers /////
cmddf.CommandSyntax = "colnames(" + objectname + ")";
object colhdrobj = analytics.ExecuteR(cmddf, true, false);
string[] colheaders;
if (colhdrobj != null && !colhdrobj.ToString().Contains("Error"))
{
if (colhdrobj.GetType().IsArray)
colheaders = (string[])colhdrobj;//{ "Aa", "Bb", "Cc" };//
else
{
colheaders = new string[1];
colheaders[0] = colhdrobj.ToString();
}
}
else
{
colheaders = new string[dimcol];
for (int i = 0; i < dimcol; i++)
colheaders[i] = (i + 1).ToString();
}
/////////finding Row headers /////
//read configuration and then decide to pull row headers
string numrowheader = confService.AppSettings.Get("numericrowheaders");
// load default value if no value is set
if (numrowheader.Trim().Length == 0)
numrowheader = confService.DefaultSettings["numericrowheaders"];
bool shownumrowheaders = numrowheader.ToLower().Equals("true") ? true : false; ///
cmddf.CommandSyntax = "rownames(" + objectname + ")";
object rowhdrobj = analytics.ExecuteR(cmddf, true, false);
string[] rowheaders;// = (string[])rowhdrobj;//{ "11", "22", "33" };
if (rowhdrobj != null && !rowhdrobj.ToString().Contains("Error"))
{
if (rowhdrobj.GetType().IsArray)
rowheaders = (string[])rowhdrobj;//{ "Aa", "Bb", "Cc" };//
else
{
rowheaders = new string[1];
rowheaders[0] = rowhdrobj.ToString();
}
}
else
{
rowheaders = new string[dimrow];
//Type 1.//filling number for row header if rowheader is not present
for (int i = 0; i < dimrow; i++)
rowheaders[i] = (i + 1).ToString();
}
bool isnumericrowheaders = true; // assuming that row headers are numeric
short tnum;
for (int i = 0; i < dimrow; i++)
{
if (!Int16.TryParse(rowheaders[i], out tnum))
{
isnumericrowheaders = false; //row headers are non-numeric
break;
}
}
if (isnumericrowheaders && !shownumrowheaders)
{
//Type 2.//filling empty values for row header if rowheader is not present
for (int i = 0; i < dimrow; i++)
rowheaders[i] = "";
}
/// Populating array using data frame data
bool isRowEmpty = true;//for Virtual.
int emptyRowCount = 0;//for Virtual.
List<int> emptyRowIndexes = new List<int>(); //for Virtual.
string cellData = string.Empty;
for (int r = 1; r <= dimrow; r++)
{
isRowEmpty = true;//for Virtual.
for (int c = 1; c <= dimcol; c++)
{
if (dimcol == 1 && !dataclassname.ToLower().Equals("data.frame"))
cmddf.CommandSyntax = "as.character(" + objectname + "[" + r + "])";
else
cmddf.CommandSyntax = "as.character(" + objectname + "[" + r + "," + c + "])";
object v = analytics.ExecuteR(cmddf, true, false);
cellData = (v != null) ? v.ToString().Trim() : "";
data[r - 1, c - 1] = cellData;// v.ToString().Trim();
//for Virtual. // cell is non-empty in row, means row is non empty because of atleast 1 col
if (cellData.Length > 0)
isRowEmpty = false;
}
//for Virtual. // counting empty rows for virtual
if (isRowEmpty)
{
emptyRowCount++;
emptyRowIndexes.Add(r - 1);//making it zero based as in above nested 'for'
}
}
// whether you want C1Flexgrid to be generated by using XML DOM or by Virtual class(Dynamic)
bool DOMmethod = false;
if (DOMmethod)
{
//12Aug2014 Old way of creating grid using DOM and then creating and filling grid step by step
XmlDocument xdoc = createFlexGridXmlDoc(colheaders, rowheaders, data);
//string xdoc = "<html><body><table><thead><tr><th class=\"h\"></th><th class=\"c\">A</th><th class=\"c\">B</th></tr></thead><tbody><tr><td class=\"h\">X</td><td class=\"c\">5</td><td class=\"c\">6</td></tr><tr><td class=\"h\">Y</td><td class=\"c\">8</td><td class=\"c\">9</td></tr></tbody></table></body></html>";
createFlexGrid(xdoc, lst, headername);// headername = 'varname' else 'leftvarname' else 'objclass'
}
else//virutal list method
{
//There is no logic to remove empty rows in this vitual list method so
//here we try to send data with non-empty rows by dropping empty ones first.
if (emptyRowCount > 0)
{
int nonemptyrowcount = dimrow - emptyRowCount;
string[,] nonemptyrowsdata = new string[nonemptyrowcount, dimcol];
string[] nonemptyrowheaders = new string[nonemptyrowcount];
for (int rr = 0, rrr = 0; rr < data.GetLength(0); rr++)
{
if (emptyRowIndexes.Contains(rr))//skip empty rows.
continue;
for (int cc = 0; cc < data.GetLength(1); cc++)
{
nonemptyrowsdata[rrr, cc] = data[rr, cc];//only copy non-empty rows
}
nonemptyrowheaders[rrr] = rowheaders[rr];//copying row headers too.
rrr++;
}
//Using Dynamic Class creation and then populating the grid. //12Aug2014
CreateDynamicClassFlexGrid(headername, colheaders, nonemptyrowheaders, nonemptyrowsdata, lst);
}
else
{
//Using Dynamic Class creation and then populating the grid. //12Aug2014
CreateDynamicClassFlexGrid(headername, colheaders, rowheaders, data, lst);
}
}
if (ow != null)//22May2014
SendToOutput("", ref lst, ow);//send dataframe/matrix/array to output window or disk file
}
public void RunCommands(string commands, BSkyDialogProperties dlgprop = null) //30Apr2013
{
try
{
ShowMouseBusy();
AdvancedLogging = AdvancedLoggingService.AdvLog;//01May2015
logService.WriteToLogLevel("Adv Log Flag:" + AdvancedLogging.ToString(), LogLevelEnum.Info);
DlgProp = dlgprop;
#region Load registered graphic commands from GraphicCommandList.txt 18Sep2012
// loads each time run is clicked. Performance will be effected, as we read file each time.
string grplstfullfilepath = confService.GetConfigValueForKey("sinkregstrdgrph");//23nov2012
//if graphic file does not exists the n create one.
if (!IsValidFullPathFilename(grplstfullfilepath, true))//17Jan2014
{
string text = "plot";
System.IO.File.WriteAllText(@grplstfullfilepath, text);
}
// load default value if no path is set or invalid path is set
if (grplstfullfilepath.Trim().Length == 0 || !IsValidFullPathFilename(grplstfullfilepath, true))
{
//grplstfullfilepath = confService.DefaultSettings["sinkregstrdgrph"];
MessageBox.Show(this, "Key 'sinkregstrdgrph' not found in config file. You cannot run Graphics from Command Editor.");
//return;
}
else
{
LoadRegisteredGraphicsCommands(@grplstfullfilepath);
}
#endregion
#region Save to Disk
if (saveoutput.IsChecked == true)
{
if (fullpathfilename.Text != null && fullpathfilename.Text.Trim().Length > 0)
{
fullfilepathname = fullpathfilename.Text;///setting filename
bool fileExists = File.Exists(fullfilepathname); fileExists = false;
if (fullfilepathname.Contains('.') && !fileExists)
{
string extension = Path.GetExtension(fullfilepathname).ToLower();// fullfilepathname.Substring(fullfilepathname.LastIndexOf('.'));
if (extension.Equals(".csv"))
{ fileformat = C1.WPF.FlexGrid.FileFormat.Csv; extratags = false; }
else if (extension.Equals(".html"))
{ fileformat = C1.WPF.FlexGrid.FileFormat.Html; extratags = false; }
else if (extension.Equals(".bsoz"))
{ fileformat = C1.WPF.FlexGrid.FileFormat.Html; extratags = true; }
else
{ fileformat = C1.WPF.FlexGrid.FileFormat.Html; extratags = true; fullfilepathname = fullfilepathname + ".bsoz"; }
}
else
{
MessageBox.Show(this, "Output File Already Exists! Provide different name in Command Editor window.");
return;
}
}
else
{
MessageBox.Show(this, "Please provide new output filename and fileformat by clicking 'Browse' in Command Editor for saving the output.", "Save Output is checked...", MessageBoxButton.OK, MessageBoxImage.Asterisk);
return;
}
}
#endregion
#region Get Active output Window
//////// Active output window ///////
OutputWindowContainer owc = (LifetimeService.Instance.Container.Resolve<IOutputWindowContainer>()) as OutputWindowContainer;
ow = owc.ActiveOutputWindow as OutputWindow; //get currently active window
if (saveoutput.IsChecked == true)
{
ow.ToDiskFile = true;//save lst to disk. Dump
}
#endregion
#region Executing Syntax Editors Commands
///// Now statements from Syntax Editor will be executed ////
CommandOutput lst = new CommandOutput(); ////one analysis////////
lst.IsFromSyntaxEditor = true;
if (saveoutput.IsChecked == true)//10Jan2013
lst.SelectedForDump = true;
////03Oct2014 We should remove R comments right here, before proceeding with execution.
string nocommentscommands = RemoveCommentsFromCommands(commands);
ExecuteCommandsAndCreateSinkFile(ow, lst, nocommentscommands);
bool s = true;
if (s) CreateOuput(ow); /// for last remaining few non BSkyFormat commands, if any.
///
#endregion
#region Saving to Disk
//////Dumping results from Syntax Editor ////08Aug2012
if (saveoutput.IsChecked == true)
ow.DumpAllAnalyisOuput(fullfilepathname, fileformat, extratags);
#endregion
}
catch (Exception ex)
{
logService.WriteToLogLevel("Exeception:" + ex.Message, LogLevelEnum.Error);
}
finally
{
HideMouseBusy();
}
}
private void SendToOutput(string auparas, ref CommandOutput lst, OutputWindow ow, bool isBlockCommand = false)//, bool last=false)
{
if (auparas != null && auparas.Trim().Length > 0)
{
this.createAUPara(auparas, lst);//Create & Add AUPara to lst and empty dommid
auparas = null;
}
if (lst != null && lst.Count > 0 && !isBlockCommand) //if non block command, then sent to output
{
sessionlst.Add(lst);//15Nov2013
lst = new CommandOutput();//after adding to session new object is allocated for futher output creation
//15Nov2013 ow.AddAnalyisFromSyntaxEditor(lst);//, last);/// send to output and/or dump file
}
}
private void CreateAllGraphicOutput(OutputWindow ow)
{
CommandOutput grplst = new CommandOutput();
long EmptyImgSize = EMPTYIMAGESIZE;//size(in bytes) of empty png file
CloseGraphicsDevice();
////// now add image to lst ////
string synedtimg = Path.Combine(System.IO.Path.GetTempPath().Replace("\\", "/"), confService.GetConfigValueForKey("sinkimage"));//23nov2012
/////03May2013 Create zero padding string //// %03d means 000, %04d means 0000
int percentindex = synedtimg.IndexOf("%");
int dindex = synedtimg.IndexOf("d", percentindex);
string percentstr = synedtimg.Substring(percentindex, (dindex - percentindex + 1));
string numbr = synedtimg.Substring(percentindex + 1, (dindex - percentindex - 1));
int zerocount = Convert.ToInt16(numbr);
string zeropadding = string.Empty;
for (int zeros = 1; zeros <= zerocount; zeros++)
{
zeropadding = zeropadding + "0";
}
int imgcount = GraphicDeviceImageCounter;//number of images to load in output
for (; ; )//03May2013 earlier there was no for loop for following code
{
imgcount++;
string tempsynedtimg = synedtimg.Replace(percentstr, imgcount.ToString(zeropadding));
// load default value if no path is set or invalid path is set
if (tempsynedtimg.Trim().Length == 0 || !IsValidFullPathFilename(tempsynedtimg, true))
{
break;
}
string source = @tempsynedtimg;
long imgsize = new FileInfo(source).Length;//find size of the imagefile
if (imgsize > EmptyImgSize)//if image is not an empty image
{
Image myImage = new Image();
var bitmap = new BitmapImage();
try
{
var stream = File.OpenRead(source);
bitmap.BeginInit();
bitmap.CacheOption = BitmapCacheOption.OnLoad;
bitmap.StreamSource = stream;
bitmap.EndInit();
stream.Close();
stream.Dispose();
myImage.Source = bitmap;
bitmap.StreamSource.Close(); //trying to close stream 03Feb2014
createBSkyGraphic(myImage, grplst); //add graphic
DeleteFileIfPossible(@tempsynedtimg);
}
catch (Exception ex)
{
logService.WriteToLogLevel("Error reading Image file " + source + "\n" + ex.Message, LogLevelEnum.Error);
MessageBox.Show(this, ex.Message);
}
}
}
if (imgcount < 1) ////03May2013 if no images were added to output lst. then return.
{
return;
}
SendToOutput(null, ref grplst, ow, false);//send all graphic to output
OpenGraphicsDevice();//in case of errors or no errors, you must open graphic device
}
void System.Windows.Markup.IComponentConnector.Connect(int connectionId, object target) {
switch (connectionId)
{
case 1:
this.outwin = ((BlueSky.OutputWindow)(target));
#line 5 "..\..\OutputWindow.xaml"
this.outwin.SizeChanged += new System.Windows.SizeChangedEventHandler(this.outwin_SizeChanged);
#line default
#line hidden
#line 6 "..\..\OutputWindow.xaml"
this.outwin.Closing += new System.ComponentModel.CancelEventHandler(this.outwin_Closing);
#line default
#line hidden
#line 7 "..\..\OutputWindow.xaml"
this.outwin.Closed += new System.EventHandler(this.outwin_Closed);
#line default
#line hidden
#line 8 "..\..\OutputWindow.xaml"
this.outwin.Loaded += new System.Windows.RoutedEventHandler(this.outwin_Loaded);
#line default
#line hidden
return;
case 2:
this.parentgrid = ((System.Windows.Controls.Grid)(target));
return;
case 3:
this.top = ((System.Windows.Controls.RowDefinition)(target));
return;
case 4:
this.bottom = ((System.Windows.Controls.RowDefinition)(target));
return;
case 5:
this.leftmost = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 6:
this.rightmost = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 7:
this.outputgrid = ((System.Windows.Controls.Grid)(target));
return;
case 8:
this.outputborder = ((System.Windows.Controls.Border)(target));
return;
case 9:
this.outputsubgrid = ((System.Windows.Controls.Grid)(target));
return;
case 10:
this.OutputTitle = ((System.Windows.Controls.TextBlock)(target));
return;
case 11:
this.menu1 = ((System.Windows.Controls.Menu)(target));
return;
case 12:
#line 69 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.open_Click);
#line default
#line hidden
return;
case 13:
#line 70 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.dump_Click);
#line default
#line hidden
return;
case 14:
#line 71 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemClose_Click);
#line default
#line hidden
return;
case 15:
this.vertical = ((System.Windows.Controls.MenuItem)(target));
#line 81 "..\..\OutputWindow.xaml"
this.vertical.Click += new System.Windows.RoutedEventHandler(this.flip_Click);
#line default
#line hidden
return;
case 16:
this.horizontal = ((System.Windows.Controls.MenuItem)(target));
#line 82 "..\..\OutputWindow.xaml"
this.horizontal.Click += new System.Windows.RoutedEventHandler(this.flip_Click);
#line default
#line hidden
return;
case 17:
this.navtreemi = ((System.Windows.Controls.MenuItem)(target));
#line 83 "..\..\OutputWindow.xaml"
this.navtreemi.Click += new System.Windows.RoutedEventHandler(this.navtreemi_Click);
#line default
#line hidden
return;
case 18:
this.dialogtoolbar = ((System.Windows.Controls.ToolBar)(target));
return;
case 19:
this.outwingrid = ((System.Windows.Controls.Grid)(target));
return;
case 20:
this.navtreecol = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 21:
this.NavTree = ((System.Windows.Controls.TreeView)(target));
return;
case 22:
this.scrollviewer = ((System.Windows.Controls.ScrollViewer)(target));
return;
case 23:
this.panelcontainer = ((System.Windows.Controls.Grid)(target));
return;
case 24:
this.mypanel = ((System.Windows.Controls.StackPanel)(target));
return;
case 25:
this.gridSplitter1 = ((System.Windows.Controls.GridSplitter)(target));
return;
case 26:
this.horizontalsplit = ((System.Windows.Controls.GridSplitter)(target));
return;
case 27:
this.verticalsplit = ((System.Windows.Controls.GridSplitter)(target));
return;
case 28:
this.syntaxgrid = ((System.Windows.Controls.Grid)(target));
return;
case 29:
this.syntaxborder = ((System.Windows.Controls.Border)(target));
return;
case 30:
this.syntaxsubgrid = ((System.Windows.Controls.Grid)(target));
return;
case 31:
this.rowdefsyntax = ((System.Windows.Controls.RowDefinition)(target));
return;
case 32:
this.titlegrid = ((System.Windows.Controls.Grid)(target));
return;
case 33:
this.splitimg = ((System.Windows.Controls.Image)(target));
#line 154 "..\..\OutputWindow.xaml"
this.splitimg.MouseDown += new System.Windows.Input.MouseButtonEventHandler(this.Image_MouseDown);
#line default
#line hidden
return;
case 34:
this.SyntaxTitle = ((System.Windows.Controls.TextBlock)(target));
return;
case 35:
this.belowsynaxtitlegrid = ((System.Windows.Controls.Grid)(target));
return;
case 36:
this.SMenu = ((System.Windows.Controls.Menu)(target));
return;
case 37:
#line 169 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemNew_Click);
#line default
#line hidden
return;
case 38:
#line 170 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemOpen_Click);
#line default
#line hidden
return;
case 39:
#line 171 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSave_Click);
#line default
#line hidden
return;
case 40:
#line 172 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSaveAs_Click);
#line default
#line hidden
return;
case 41:
this.findreplace = ((System.Windows.Controls.MenuItem)(target));
#line 181 "..\..\OutputWindow.xaml"
this.findreplace.Click += new System.Windows.RoutedEventHandler(this.findreplace_Click);
#line default
#line hidden
return;
case 42:
#line 185 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemNew_Click);
#line default
#line hidden
return;
case 43:
#line 193 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemOpen_Click);
#line default
#line hidden
return;
case 44:
#line 201 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSave_Click);
#line default
#line hidden
return;
case 45:
#line 212 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.runButton_Click);
#line default
#line hidden
return;
case 46:
#line 220 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.Refresh_Click);
#line default
#line hidden
return;
case 47:
this.inputTextbox = ((System.Windows.Controls.TextBox)(target));
#line 271 "..\..\OutputWindow.xaml"
this.inputTextbox.TextChanged += new System.Windows.Controls.TextChangedEventHandler(this.inputTextbox_TextChanged);
#line default
#line hidden
return;
}
this._contentLoaded = true;
}
void System.Windows.Markup.IComponentConnector.Connect(int connectionId, object target)
{
switch (connectionId)
{
case 1:
this.outwin = ((BlueSky.OutputWindow)(target));
#line 5 "..\..\OutputWindow.xaml"
this.outwin.SizeChanged += new System.Windows.SizeChangedEventHandler(this.outwin_SizeChanged);
#line default
#line hidden
#line 6 "..\..\OutputWindow.xaml"
this.outwin.Closing += new System.ComponentModel.CancelEventHandler(this.outwin_Closing);
#line default
#line hidden
#line 7 "..\..\OutputWindow.xaml"
this.outwin.Closed += new System.EventHandler(this.outwin_Closed);
#line default
#line hidden
#line 8 "..\..\OutputWindow.xaml"
this.outwin.Loaded += new System.Windows.RoutedEventHandler(this.outwin_Loaded);
#line default
#line hidden
return;
case 2:
this.parentgrid = ((System.Windows.Controls.Grid)(target));
return;
case 3:
this.top = ((System.Windows.Controls.RowDefinition)(target));
return;
case 4:
this.bottom = ((System.Windows.Controls.RowDefinition)(target));
return;
case 5:
this.leftmost = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 6:
this.rightmost = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 7:
this.outputgrid = ((System.Windows.Controls.Grid)(target));
return;
case 8:
this.outputborder = ((System.Windows.Controls.Border)(target));
return;
case 9:
this.outputsubgrid = ((System.Windows.Controls.Grid)(target));
return;
case 10:
this.OutputTitle = ((System.Windows.Controls.TextBlock)(target));
return;
case 11:
this.menu1 = ((System.Windows.Controls.Menu)(target));
return;
case 12:
#line 69 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.open_Click);
#line default
#line hidden
return;
case 13:
#line 70 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.dump_Click);
#line default
#line hidden
return;
case 14:
#line 71 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemClose_Click);
#line default
#line hidden
return;
case 15:
this.vertical = ((System.Windows.Controls.MenuItem)(target));
#line 81 "..\..\OutputWindow.xaml"
this.vertical.Click += new System.Windows.RoutedEventHandler(this.flip_Click);
#line default
#line hidden
return;
case 16:
this.horizontal = ((System.Windows.Controls.MenuItem)(target));
#line 82 "..\..\OutputWindow.xaml"
this.horizontal.Click += new System.Windows.RoutedEventHandler(this.flip_Click);
#line default
#line hidden
return;
case 17:
this.navtreemi = ((System.Windows.Controls.MenuItem)(target));
#line 83 "..\..\OutputWindow.xaml"
this.navtreemi.Click += new System.Windows.RoutedEventHandler(this.navtreemi_Click);
#line default
#line hidden
return;
case 18:
this.dialogtoolbar = ((System.Windows.Controls.ToolBar)(target));
return;
case 19:
this.outwingrid = ((System.Windows.Controls.Grid)(target));
return;
case 20:
this.navtreecol = ((System.Windows.Controls.ColumnDefinition)(target));
return;
case 21:
this.NavTree = ((System.Windows.Controls.TreeView)(target));
return;
case 22:
this.scrollviewer = ((System.Windows.Controls.ScrollViewer)(target));
return;
case 23:
this.panelcontainer = ((System.Windows.Controls.Grid)(target));
return;
case 24:
this.mypanel = ((System.Windows.Controls.StackPanel)(target));
return;
case 25:
this.gridSplitter1 = ((System.Windows.Controls.GridSplitter)(target));
return;
case 26:
this.horizontalsplit = ((System.Windows.Controls.GridSplitter)(target));
return;
case 27:
this.verticalsplit = ((System.Windows.Controls.GridSplitter)(target));
return;
case 28:
this.syntaxgrid = ((System.Windows.Controls.Grid)(target));
return;
case 29:
this.syntaxborder = ((System.Windows.Controls.Border)(target));
return;
case 30:
this.syntaxsubgrid = ((System.Windows.Controls.Grid)(target));
return;
case 31:
this.rowdefsyntax = ((System.Windows.Controls.RowDefinition)(target));
return;
case 32:
this.titlegrid = ((System.Windows.Controls.Grid)(target));
return;
case 33:
this.splitimg = ((System.Windows.Controls.Image)(target));
#line 154 "..\..\OutputWindow.xaml"
this.splitimg.MouseDown += new System.Windows.Input.MouseButtonEventHandler(this.Image_MouseDown);
#line default
#line hidden
return;
case 34:
this.SyntaxTitle = ((System.Windows.Controls.TextBlock)(target));
return;
case 35:
this.belowsynaxtitlegrid = ((System.Windows.Controls.Grid)(target));
return;
case 36:
this.SMenu = ((System.Windows.Controls.Menu)(target));
return;
case 37:
#line 169 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemNew_Click);
#line default
#line hidden
return;
case 38:
#line 170 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemOpen_Click);
#line default
#line hidden
return;
case 39:
#line 171 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSave_Click);
#line default
#line hidden
return;
case 40:
#line 172 "..\..\OutputWindow.xaml"
((System.Windows.Controls.MenuItem)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSaveAs_Click);
#line default
#line hidden
return;
case 41:
this.findreplace = ((System.Windows.Controls.MenuItem)(target));
#line 181 "..\..\OutputWindow.xaml"
this.findreplace.Click += new System.Windows.RoutedEventHandler(this.findreplace_Click);
#line default
#line hidden
return;
case 42:
#line 185 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemNew_Click);
#line default
#line hidden
return;
case 43:
#line 193 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemOpen_Click);
#line default
#line hidden
return;
case 44:
#line 201 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.MenuItemSave_Click);
#line default
#line hidden
return;
case 45:
#line 212 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.runButton_Click);
#line default
#line hidden
return;
case 46:
#line 220 "..\..\OutputWindow.xaml"
((System.Windows.Controls.Button)(target)).Click += new System.Windows.RoutedEventHandler(this.Refresh_Click);
#line default
#line hidden
return;
case 47:
this.inputTextbox = ((System.Windows.Controls.TextBox)(target));
#line 271 "..\..\OutputWindow.xaml"
this.inputTextbox.TextChanged += new System.Windows.Controls.TextChangedEventHandler(this.inputTextbox_TextChanged);
#line default
#line hidden
return;
}
this._contentLoaded = true;
}