getPVI(ObjectId idAlign, double dblStation, ref List <POI> varpoi, double dblHeightCurb, ref bool boolNewPVI)
{
bool boolFound = false;
Profile objProfileFLOWLINE = Prof.getProfile(idAlign, "FLOWLINE");
Profile objProfileSTAKE = Prof.getProfile(idAlign, "STAKE");
ProfilePVICollection objProfilePVIs = objProfileSTAKE.PVIs;
double dblProfileElev = System.Math.Round(objProfileFLOWLINE.ElevationAt(dblStation) + dblHeightCurb / 12, 3);
for (int i = 0; i <= objProfilePVIs.Count - 1; i++)
{
ProfilePVI objProfilePVI = objProfilePVIs[i];
if (Math.roundDown1((objProfilePVI.Station)) == Math.roundDown1(dblStation))
{
objProfilePVI.Elevation = dblProfileElev;
boolFound = true;
break;
}
}
if (boolFound)
{
for (int k = 0; k < varpoi.Count; k++)
{
if (varpoi[k].Station == Math.roundDown3(dblStation))
{
check4GradeBreak(k, varpoi);
}
}
boolFound = false;
}
else
{
boolNewPVI = true;
ProfilePVI objProfilePVI = objProfilePVIs.AddPVI(dblStation, dblProfileElev);
varpoi.Add(new POI {
Station = Math.roundDown3(dblStation), Elevation = dblProfileElev, ClassObj = fStake.ClassObj
});
var sortSta = from p in varpoi
orderby p.Station
select p;
int j = 0;
foreach (var p in sortSta)
{
j += 1;
if (Math.roundDown3(dblStation) == p.Station)
{
check4GradeBreak(j, varpoi);
break;
}
}
}
}
CreateProfileByDesign2b(Alignment objAlignPL, Alignment objAlignRF)
{
Profile objProfileDES = null;
Profile objprofilePL = Prof.getProfile(objAlignPL.Name, "EXIST");
Profile objProfileRF = Prof.getProfile(objAlignRF.Name, "CPNT");
double XT = 0;
double X1 = 0;
double X2 = 0;
double X0 = Convert.ToDouble(fWall1.tbx_X0.Text);
double S0 = Convert.ToDouble(fWall1.tbx_S0.Text);
double CF = Convert.ToDouble(fWall1.tbx_CF.Text);
double B1 = Convert.ToDouble(fWall1.tbx_B1.Text);
double S1 = Convert.ToDouble(fWall1.tbx_S1.Text);
double SG = Convert.ToDouble(fWall1.tbx_SG.Text);
double B2 = Convert.ToDouble(fWall1.tbx_B2.Text);
double S2 = Convert.ToDouble(fWall1.tbx_S2.Text);
double dblOffsetPL = 0;
double dblEasting = 0;
double dblNorthing = 0;
List <Point3d> pnts3dX0 = new List <Point3d>();
List <Point3d> pnts3dFL = new List <Point3d>();
List <Point3d> pnts3dTC = new List <Point3d>();
List <Point3d> pnts3dTOE = new List <Point3d>();
List <Point3d> pnts3dTS = new List <Point3d>();
List <Point3d> pnts3dTOP = new List <Point3d>();
List <Point3d> pnts3dWT0 = new List <Point3d>();
List <Point3d> pnts3dWB0 = new List <Point3d>();
List <Point3d> pnts3dWTB = new List <Point3d>();
List <Point3d> pnts3dWBB = new List <Point3d>();
short intSign = 0;
double dblElevRF = 0;
double dblElevFL = 0;
double dblElevTC = 0;
double dblElevTOE = 0;
double dblElevTS = 0;
double dblElevTOP = 0;
double dblElevWT0 = 0;
double dblElevWB0 = 0;
double dblElevWTB = 0;
double dblElevWBB = 0;
double dblElevPL = 0;
double dblWallWidth = 10 / 12;
double dblStationRF = 0;
double dblStationPL = 0;
ObjectId idPoly3d = ObjectId.Null;
Point3d pnt3d = default(Point3d);
string strLayerName = null;
bool boolDesLow = false;
bool boolDesHigh = false;
strLayerName = "PROFILE-CPNT";
ObjectId idLayer = Layer.manageLayers(strLayerName);
objAlignRF.PointLocation(objAlignRF.StartingStation, 0, ref dblEasting, ref dblNorthing);
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (dblOffsetPL < 0)
{
intSign = -1;
dblOffsetPL = dblOffsetPL * -1;
}
else
{
intSign = 1;
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//Dim varPNT_DATA_FINAL() As PNT_DATA = getPNT_DATA_FINAL(objAlignPL, objAlignRF)
List <double> dblStationsFinal = wd.getPNT_DATA_FINAL(objAlignPL, objAlignRF);
fWall1.Stations = dblStationsFinal;
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
if ((fWall1.Stations == null))
{
return;
}
else
{
objProfileRF = Prof.getProfile(objAlignRF.Name, "CPNT");
objprofilePL = Prof.getProfile(objAlignPL.Name, "EXIST");
}
//-------CREATE PROFILE FOR DESIGN SURFACE AT WALL/PL ALIGNMENT
try
{
Prof.removeProfile(objAlignPL.ObjectId, "CPNT");
//Dim idProfileStyle As ObjectId = Prof_Style.getProfileStyle("WALL")
//Dim idStyleLabelSet As ObjectId = Prof_Style.getProfileLabelSetStyle("WALL")
ObjectId idProfileStyle = Prof_Style.getProfileStyle("Standard");
ObjectId idStyleLabelSet = Prof_Style.getProfileLabelSetStyle("Standard");
using (BaseObjs._acadDoc.LockDocument())
{
using (Transaction TR = BaseObjs.startTransactionDb())
{
objProfileDES = Prof.addProfileByLayout("CPNT", objAlignPL.ObjectId, idLayer, idProfileStyle, idStyleLabelSet);
TR.Commit();
}
}
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
double dblAngOFF = 0;
double dblAngWALL = 0;
double dblSkew = 0;
Point3d pnt3dBeg = default(Point3d);
Point3d pnt3dEnd = default(Point3d);
pnt3dBeg = objAlignRF.StartPoint;
pnt3dEnd = objAlignRF.EndPoint;
dblAngOFF = Measure.getAzRadians(pnt3dBeg, pnt3dEnd);
pnt3dBeg = objAlignPL.StartPoint;
pnt3dEnd = objAlignPL.EndPoint;
dblAngWALL = Measure.getAzRadians(pnt3dBeg, pnt3dEnd);
dblSkew = dblAngWALL - dblAngOFF;
bool boolStart = false;
bool boolDone = false;
for (int i = 0; i < dblStationsFinal.Count; i++)
{
dblStationRF = Math.roundDown1(dblStationsFinal[i]);
//CURRENT STATION ON RF
objAlignRF.PointLocation(dblStationRF, 0.0, ref dblEasting, ref dblNorthing);
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
// CORRESPONDING STATION ON PL
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (System.Math.Round(dblStationPL, 1) >= System.Math.Round(objAlignPL.StartingStation, 1))
{
boolStart = true;
}
if (System.Math.Round(dblStationPL, 1) <= System.Math.Round(objAlignPL.EndingStation, 1))
{
boolDone = false;
}
if (boolStart == true & boolDone == false)
{
dblElevRF = objProfileRF.ElevationAt(dblStationRF);
//elevation on RF at current RF station
dblElevFL = dblElevRF + (X0 - 0.15) * S0;
dblElevTC = dblElevFL + CF / 12;
dblElevPL = objprofilePL.ElevationAt(dblStationPL);
if (dblElevRF > 0 & dblElevPL > 0)
{
dblElevTS = dblElevPL - (B2 * S2);
objAlignRF.PointLocation(dblStationRF, X0 - 0.15, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevFL);
pnts3dFL.Add(pnt3d);
objAlignRF.PointLocation(dblStationRF, X0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTC);
pnts3dTC.Add(pnt3d);
if (dblElevTS - dblElevTC > 0)
{
boolDesLow = true;
boolDesHigh = false;
}
else if (dblElevTC - dblElevTS > 0)
{
boolDesHigh = true;
boolDesLow = false;
}
if (boolDesLow)
{
objAlignRF.PointLocation(dblStationRF, B1, ref dblEasting, ref dblNorthing);
//point location at back of B1
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (dblStationPL == 0)
{
pnt3dBeg = new Point3d(dblEasting, dblNorthing, 0.0);
pnt3dEnd = objAlignPL.EndPoint;
dblOffsetPL = pnt3dBeg.getDistance(pnt3dEnd);
}
XT = System.Math.Abs(dblOffsetPL) - X0;
X2 = ((dblElevTC - dblElevPL) + (XT - B2) * S1 + (B2 * S2)) / (S1 - SG);
//slope width
if (X2 >= 0)
{
X1 = XT - X2;
if (X1 >= 0)
{
dblElevTOE = dblElevTC + (S1 * B1) + (X1 * S1);
objAlignPL.PointLocation(dblStationPL, (X2 + B2) * intSign, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * SG;
objAlignPL.PointLocation(dblStationPL, (B2)*intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationPL, 0.0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationPL, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
else
{
//here is where we put the wall at the limit of pavement or at back of B1
X1 = B1;
X2 = XT - X1;
dblElevTOE = dblElevTC + X1 * S1;
objAlignRF.PointLocation(dblStationRF, X1 + 0.1, ref dblEasting, ref dblNorthing);
//point perp to RF
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * SG;
objAlignPL.PointLocation(dblStationPL, B2 * intSign, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationPL, 0.0, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
//wall location
dblElevWT0 = dblElevPL + 1.0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWT0.Add(pnt3d);
dblElevWB0 = dblElevTOP - 1.0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWB0);
pnts3dWB0.Add(pnt3d);
dblElevWTB = dblElevWT0;
objAlignPL.PointLocation(dblStationRF, dblWallWidth * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWTB.Add(pnt3d);
dblElevWBB = dblElevWB0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWBB);
pnts3dWBB.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationRF, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
}
//wall at pl
}
else if (boolDesHigh)
{
X1 = B1;
X2 = XT - X1;
dblElevTOE = dblElevTC + X1 * S1;
objAlignRF.PointLocation(dblStationRF, X1 + 0.1, ref dblEasting, ref dblNorthing);
//point perp to OFF at back of bench
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * S1;
objAlignPL.PointLocation(dblStationPL, B2 * intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationRF, 0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
//WALL Limits
dblElevWT0 = dblElevTOP + 1.0;
//wall top 0 offset
objAlignPL.PointLocation(dblStationRF, 0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWT0.Add(pnt3d);
dblElevWB0 = dblElevPL - 1.0;
//wall bottom 0.1 offset
objAlignPL.PointLocation(dblStationRF, 0.1 * intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWB0);
pnts3dWB0.Add(pnt3d);
dblElevWTB = dblElevWT0;
//wall top WallWidth offset
objAlignPL.PointLocation(dblStationRF, dblWallWidth * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWTB.Add(pnt3d);
dblElevWBB = dblElevWB0;
//Wall bottom WallWidth + 0.1 offset
objAlignPL.PointLocation(dblStationRF, (dblWallWidth + 0.1) * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWBB);
pnts3dWBB.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationRF, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
}
}
}
try
{
ObjectIdCollection objEntIDs = new ObjectIdCollection();
ObjectIdCollection objEntWallIDs = new ObjectIdCollection();
TypedValue[] tvs = new TypedValue[2];
tvs[0] = new TypedValue(1001, "WALL");
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dFL, "CPNT-BRKLINE", 1);
tvs[1] = new TypedValue(1000, "FL");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTC, "CPNT-BRKLINE", 2);
tvs[1] = new TypedValue(1000, "TC");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTOE, "CPNT-BRKLINE", 3);
tvs[1] = new TypedValue(1000, "TOE");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTS, "CPNT-BRKLINE", 4);
tvs[1] = new TypedValue(1000, "TS");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTOP, "CPNT-BRKLINE", 5);
tvs[1] = new TypedValue(1000, "TOP");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
string strLayer = string.Format("{0}-BRKLINE", objAlignPL.Name);
Layer.manageLayers(strLayer);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWB0, strLayer, 11);
tvs[1] = new TypedValue(1000, "WB0");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWT0, strLayer, 170);
tvs[1] = new TypedValue(1000, "WT0");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWTB, strLayer, 170);
tvs[1] = new TypedValue(1000, "WTB");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWBB, strLayer, 11);
tvs[1] = new TypedValue(1000, "WBB");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
ObjectIdCollection objEntEndIDs = default(ObjectIdCollection);
objEntEndIDs = wdp.makeEndBrklinesWALL(strLayer, objEntIDs, false);
bool exists = false;
TinSurface objSurfaceCPNT = Surf.getTinSurface("CPNT-ON", out exists);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntIDs, 0, 0, 0, 0);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntEndIDs, 0, 0, 0, 0);
TinSurface objSurfaceWall = Surf.getTinSurface(objAlignPL.Name, out exists);
objSurfaceWall.BreaklinesDefinition.AddStandardBreaklines(objEntWallIDs, 0, 0, 0, 0);
objEntEndIDs = wdp.makeEndBrklinesWALL(strLayer, objEntWallIDs, true);
objSurfaceWall.BreaklinesDefinition.AddStandardBreaklines(objEntEndIDs, 0, 0, 0, 0);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
objProfileDES.Layer = strLayerName;
}