|
public Intersects ( |
||
| otherCapsule | ||
| Résultat | bool | |
/* Test if a scene node intersected a portal during the last time delta
* (from last frame time to current frame time). This function checks
* if the node "crossed over" the portal also.
*/
public PortalIntersectResult intersects(PCZSceneNode pczsn)
{
// Only check if portal is open
if (this.mOpen)
{
if (pczsn == this.mNode)
{
// ignore the scene node if it is the node the portal is associated with
return(PortalIntersectResult.NO_INTERSECT);
}
// most complicated case - if the portal is a quad:
if (this.mType == PORTAL_TYPE.PORTAL_TYPE_QUAD)
{
// the node is modeled as a line segment (prevPostion to currentPosition)
// intersection test is then between the capsule and the line segment.
var nodeSegment = new Segment();
nodeSegment.Set(pczsn.PreviousPosition, pczsn.DerivedPosition);
// we model the portal as a line swept sphere (mPrevDerivedCP to mDerivedCP).
var portalCapsule = new Capsule();
portalCapsule.Set(this.mPrevDerivedCP, this.mDerivedCP, this.mRadius);
if (portalCapsule.Intersects(nodeSegment))
{
// the portal intersected the node at some time from last frame to this frame.
// Now check if node "crossed" the portal
// a crossing occurs if the "side" of the final position of the node compared
// to the final position of the portal is negative AND the initial position
// of the node compared to the initial position of the portal is non-negative
if (this.mDerivedPlane.GetSide(pczsn.DerivedPosition) == PlaneSide.Negative &&
this.mPrevDerivedPlane.GetSide(pczsn.DerivedPosition) != PlaneSide.Negative)
{
// safety check - make sure the node has at least one dimension which is
// small enough to fit through the portal! (avoid the "elephant fitting
// through a mouse hole" case)
Vector3 nodeHalfVector = pczsn.WorldAABB.HalfSize;
var portalBox = new Vector3(this.mRadius, this.mRadius, this.mRadius);
portalBox.Floor(nodeHalfVector);
if (portalBox.x < this.mRadius)
{
// crossing occurred!
return(PortalIntersectResult.INTERSECT_CROSS);
}
}
}
// there was no crossing of the portal by the node, but it might be touching
// the portal. We check for this by checking the bounding box of the node vs.
// the sphere of the portal
if (this.mDerivedSphere.Intersects(pczsn.WorldAABB) &&
this.mDerivedPlane.GetSide(pczsn.WorldAABB) == PlaneSide.Both)
{
// intersection but no crossing
// note this means that the node is CURRENTLY touching the portal.
if (this.mDerivedPlane.GetSide(pczsn.DerivedPosition) != PlaneSide.Negative)
{
// the node is on the positive (front) or exactly on the CP of the portal
return(PortalIntersectResult.INTERSECT_NO_CROSS);
}
else
{
// the node is on the negative (back) side of the portal - it might be in the wrong zone!
return(PortalIntersectResult.INTERSECT_BACK_NO_CROSS);
}
}
// no intersection CURRENTLY. (there might have been an intersection
// during the time between last frame and this frame, but it wasn't a portal
// crossing, and it isn't touching anymore, so it doesn't matter.
return(PortalIntersectResult.NO_INTERSECT);
}
else if (this.mType == PORTAL_TYPE.PORTAL_TYPE_AABB)
{
// for aabb's we check if the center point went from being inside to being outside
// the aabb (or vice versa) for crossing.
var aabb = new AxisAlignedBox(this.mDerivedCorners[0], this.mDerivedCorners[1]);
//bool previousInside = aabb.contains(pczsn->getPrevPosition());
bool currentInside = aabb.Contains(pczsn.DerivedPosition);
if (this.mDirection == Vector3.UnitZ)
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousInside == false &&
if (currentInside == true)
{
return(PortalIntersectResult.INTERSECT_CROSS);
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousInside == true &&
if (currentInside == false)
{
return(PortalIntersectResult.INTERSECT_CROSS);
}
}
// doesn't cross, but might be touching. This is a little tricky because we only
// care if the node aab is NOT fully contained in the portal aabb because we consider
// the surface of the portal aabb the actual 'portal'. First, check to see if the
// aab of the node intersects the aabb portal
if (aabb.Intersects(pczsn.WorldAABB))
{
// now check if the intersection between the two is not the same as the
// full node aabb, if so, then this means that the node is not fully "contained"
// which is what we are looking for.
AxisAlignedBox overlap = aabb.Intersection(pczsn.WorldAABB);
if (overlap != pczsn.WorldAABB)
{
return(PortalIntersectResult.INTERSECT_NO_CROSS);
}
}
return(PortalIntersectResult.NO_INTERSECT);
}
else
{
// for spheres we check if the center point went from being inside to being outside
// the sphere surface (or vice versa) for crossing.
//Real previousDistance2 = mPrevDerivedCP.squaredDistance(pczsn->getPrevPosition());
Real currentDistance2 = this.mDerivedCP.DistanceSquared(pczsn.DerivedPosition);
Real mRadius2 = this.mRadius * this.mRadius;
if (this.mDirection == Vector3.UnitZ)
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousDistance2 >= mRadius2 &&
if (currentDistance2 < mRadius2)
{
return(PortalIntersectResult.INTERSECT_CROSS);
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousDistance2 < mRadius2 &&
if (currentDistance2 >= mRadius2)
{
return(PortalIntersectResult.INTERSECT_CROSS);
}
}
// no crossing, but might be touching - check distance
if (System.Math.Sqrt(System.Math.Abs(mRadius2 - currentDistance2)) <= this.mRadius)
{
return(PortalIntersectResult.INTERSECT_NO_CROSS);
}
return(PortalIntersectResult.NO_INTERSECT);
}
}
return(PortalIntersectResult.NO_INTERSECT);
}
/* This function check if *this* portal "crossed over" the other portal.
*/
public bool crossedPortal( Portal otherPortal )
{
// Only check if portal is open
if ( otherPortal.mOpen )
{
// we model both portals as line swept spheres (mPrevDerivedCP to mDerivedCP).
// intersection test is then between the capsules.
// BUGBUG! This routine needs to check for case where one or both objects
// don't move - resulting in simple sphere tests
// BUGBUG! If one (or both) portals are aabb's this is REALLY not accurate.
Capsule portalCapsule, otherPortalCapsule;
portalCapsule = new Capsule();
portalCapsule.Set( this.getPrevDerivedCP(), this.getDerivedCP(), this.getRadius() );
otherPortalCapsule = new Capsule();
otherPortalCapsule.Set( otherPortal.mPrevDerivedCP,
otherPortal.mDerivedCP,
otherPortal.mRadius );
if ( portalCapsule.Intersects( otherPortalCapsule ) )
{
// the portal intersected the other portal at some time from last frame to this frame.
// Now check if this portal "crossed" the other portal
switch ( otherPortal.Type )
{
case PORTAL_TYPE.PORTAL_TYPE_QUAD:
// a crossing occurs if the "side" of the final position of this portal compared
// to the final position of the other portal is negative AND the initial position
// of this portal compared to the initial position of the other portal is non-negative
// NOTE: This function assumes that this portal is the smaller portal potentially crossing
// over the otherPortal which is larger.
if ( otherPortal.getDerivedPlane().GetSide( mDerivedCP ) == PlaneSide.Negative &&
otherPortal.getPrevDerivedPlane().GetSide( mPrevDerivedCP ) != PlaneSide.Negative )
{
// crossing occurred!
return true;
}
break;
case PORTAL_TYPE.PORTAL_TYPE_AABB:
{
// for aabb's we check if the center point went from being inside to being outside
// the aabb (or vice versa) for crossing.
AxisAlignedBox aabb = new AxisAlignedBox( otherPortal.getDerivedCorner( 0 ), otherPortal.getDerivedCorner( 1 ) );
//bool previousInside = aabb.contains(mPrevDerivedCP);
bool currentInside = aabb.Contains( mDerivedCP );
if ( otherPortal.getDerivedDirection() == Vector3.UnitZ )
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousInside == false &&
if ( currentInside == true )
{
return true;
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousInside == true &&
if ( currentInside == false )
{
return true;
}
}
}
break;
case PORTAL_TYPE.PORTAL_TYPE_SPHERE:
{
// for spheres we check if the center point went from being inside to being outside
// the sphere surface (or vice versa) for crossing.
//Real previousDistance2 = mPrevDerivedCP.squaredDistance(otherPortal->getPrevDerivedCP());
Real currentDistance2 = mDerivedCP.DistanceSquared( otherPortal.getDerivedCP() );
Real mRadius2 = System.Math.Sqrt( otherPortal.getRadius() );
if ( otherPortal.getDerivedDirection() == Vector3.UnitZ )
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousDistance2 >= mRadius2 &&
if ( currentDistance2 < mRadius2 )
{
return true;
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousDistance2 < mRadius2 &&
if ( currentDistance2 >= mRadius2 )
{
return true;
}
}
}
break;
}
}
}
// there was no crossing of the portal by this portal. It might be touching
// the other portal (but we don't care currently)
return false;
}
/* This function check if *this* portal "crossed over" the other portal.
*/
public bool crossedPortal(Portal otherPortal)
{
// Only check if portal is open
if (otherPortal.mOpen)
{
// we model both portals as line swept spheres (mPrevDerivedCP to mDerivedCP).
// intersection test is then between the capsules.
// BUGBUG! This routine needs to check for case where one or both objects
// don't move - resulting in simple sphere tests
// BUGBUG! If one (or both) portals are aabb's this is REALLY not accurate.
Capsule portalCapsule, otherPortalCapsule;
portalCapsule = new Capsule();
portalCapsule.Set(getPrevDerivedCP(), getDerivedCP(), getRadius());
otherPortalCapsule = new Capsule();
otherPortalCapsule.Set(otherPortal.mPrevDerivedCP, otherPortal.mDerivedCP, otherPortal.mRadius);
if (portalCapsule.Intersects(otherPortalCapsule))
{
// the portal intersected the other portal at some time from last frame to this frame.
// Now check if this portal "crossed" the other portal
switch (otherPortal.Type)
{
case PORTAL_TYPE.PORTAL_TYPE_QUAD:
// a crossing occurs if the "side" of the final position of this portal compared
// to the final position of the other portal is negative AND the initial position
// of this portal compared to the initial position of the other portal is non-negative
// NOTE: This function assumes that this portal is the smaller portal potentially crossing
// over the otherPortal which is larger.
if (otherPortal.getDerivedPlane().GetSide(this.mDerivedCP) == PlaneSide.Negative &&
otherPortal.getPrevDerivedPlane().GetSide(this.mPrevDerivedCP) != PlaneSide.Negative)
{
// crossing occurred!
return(true);
}
break;
case PORTAL_TYPE.PORTAL_TYPE_AABB:
{
// for aabb's we check if the center point went from being inside to being outside
// the aabb (or vice versa) for crossing.
var aabb = new AxisAlignedBox(otherPortal.getDerivedCorner(0), otherPortal.getDerivedCorner(1));
//bool previousInside = aabb.contains(mPrevDerivedCP);
bool currentInside = aabb.Contains(this.mDerivedCP);
if (otherPortal.getDerivedDirection() == Vector3.UnitZ)
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousInside == false &&
if (currentInside == true)
{
return(true);
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousInside == true &&
if (currentInside == false)
{
return(true);
}
}
}
break;
case PORTAL_TYPE.PORTAL_TYPE_SPHERE:
{
// for spheres we check if the center point went from being inside to being outside
// the sphere surface (or vice versa) for crossing.
//Real previousDistance2 = mPrevDerivedCP.squaredDistance(otherPortal->getPrevDerivedCP());
Real currentDistance2 = this.mDerivedCP.DistanceSquared(otherPortal.getDerivedCP());
Real mRadius2 = System.Math.Sqrt(otherPortal.getRadius());
if (otherPortal.getDerivedDirection() == Vector3.UnitZ)
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousDistance2 >= mRadius2 &&
if (currentDistance2 < mRadius2)
{
return(true);
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousDistance2 < mRadius2 &&
if (currentDistance2 >= mRadius2)
{
return(true);
}
}
}
break;
}
}
}
// there was no crossing of the portal by this portal. It might be touching
// the other portal (but we don't care currently)
return(false);
}
/* Test if a scene node intersected a portal during the last time delta
* (from last frame time to current frame time). This function checks
* if the node "crossed over" the portal also.
*/
public PortalIntersectResult intersects( PCZSceneNode pczsn )
{
// Only check if portal is open
if ( mOpen )
{
if ( pczsn == mNode )
{
// ignore the scene node if it is the node the portal is associated with
return PortalIntersectResult.NO_INTERSECT;
}
// most complicated case - if the portal is a quad:
if ( mType == PORTAL_TYPE.PORTAL_TYPE_QUAD )
{
// the node is modeled as a line segment (prevPostion to currentPosition)
// intersection test is then between the capsule and the line segment.
Segment nodeSegment = new Segment();
nodeSegment.Set( pczsn.PreviousPosition, pczsn.DerivedPosition );
// we model the portal as a line swept sphere (mPrevDerivedCP to mDerivedCP).
Capsule portalCapsule = new Capsule();
portalCapsule.Set( mPrevDerivedCP, mDerivedCP, mRadius );
if ( portalCapsule.Intersects( nodeSegment ) )
{
// the portal intersected the node at some time from last frame to this frame.
// Now check if node "crossed" the portal
// a crossing occurs if the "side" of the final position of the node compared
// to the final position of the portal is negative AND the initial position
// of the node compared to the initial position of the portal is non-negative
if ( mDerivedPlane.GetSide( pczsn.DerivedPosition ) == PlaneSide.Negative &&
mPrevDerivedPlane.GetSide( pczsn.DerivedPosition ) != PlaneSide.Negative )
{
// safety check - make sure the node has at least one dimension which is
// small enough to fit through the portal! (avoid the "elephant fitting
// through a mouse hole" case)
Vector3 nodeHalfVector = pczsn.WorldAABB.HalfSize;
Vector3 portalBox = new Vector3( mRadius, mRadius, mRadius );
portalBox.Floor( nodeHalfVector );
if ( portalBox.x < mRadius )
{
// crossing occurred!
return PortalIntersectResult.INTERSECT_CROSS;
}
}
}
// there was no crossing of the portal by the node, but it might be touching
// the portal. We check for this by checking the bounding box of the node vs.
// the sphere of the portal
if ( mDerivedSphere.Intersects( pczsn.WorldAABB ) &&
mDerivedPlane.GetSide( pczsn.WorldAABB ) == PlaneSide.Both )
{
// intersection but no crossing
// note this means that the node is CURRENTLY touching the portal.
if ( mDerivedPlane.GetSide( pczsn.DerivedPosition ) != PlaneSide.Negative )
{
// the node is on the positive (front) or exactly on the CP of the portal
return PortalIntersectResult.INTERSECT_NO_CROSS;
}
else
{
// the node is on the negative (back) side of the portal - it might be in the wrong zone!
return PortalIntersectResult.INTERSECT_BACK_NO_CROSS;
}
}
// no intersection CURRENTLY. (there might have been an intersection
// during the time between last frame and this frame, but it wasn't a portal
// crossing, and it isn't touching anymore, so it doesn't matter.
return PortalIntersectResult.NO_INTERSECT;
}
else if ( mType == PORTAL_TYPE.PORTAL_TYPE_AABB )
{
// for aabb's we check if the center point went from being inside to being outside
// the aabb (or vice versa) for crossing.
AxisAlignedBox aabb = new AxisAlignedBox( mDerivedCorners[ 0 ], mDerivedCorners[ 1 ] );
//bool previousInside = aabb.contains(pczsn->getPrevPosition());
bool currentInside = aabb.Contains( pczsn.DerivedPosition );
if ( mDirection == Vector3.UnitZ )
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousInside == false &&
if ( currentInside == true )
{
return PortalIntersectResult.INTERSECT_CROSS;
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousInside == true &&
if ( currentInside == false )
{
return PortalIntersectResult.INTERSECT_CROSS;
}
}
// doesn't cross, but might be touching. This is a little tricky because we only
// care if the node aab is NOT fully contained in the portal aabb because we consider
// the surface of the portal aabb the actual 'portal'. First, check to see if the
// aab of the node intersects the aabb portal
if ( aabb.Intersects( pczsn.WorldAABB ) )
{
// now check if the intersection between the two is not the same as the
// full node aabb, if so, then this means that the node is not fully "contained"
// which is what we are looking for.
AxisAlignedBox overlap = aabb.Intersection( pczsn.WorldAABB );
if ( overlap != pczsn.WorldAABB )
{
return PortalIntersectResult.INTERSECT_NO_CROSS;
}
}
return PortalIntersectResult.NO_INTERSECT;
}
else
{
// for spheres we check if the center point went from being inside to being outside
// the sphere surface (or vice versa) for crossing.
//Real previousDistance2 = mPrevDerivedCP.squaredDistance(pczsn->getPrevPosition());
Real currentDistance2 = mDerivedCP.DistanceSquared( pczsn.DerivedPosition );
Real mRadius2 = mRadius * mRadius;
if ( mDirection == Vector3.UnitZ )
{
// portal norm is "outward" pointing, look for going from outside to inside
//if (previousDistance2 >= mRadius2 &&
if ( currentDistance2 < mRadius2 )
{
return PortalIntersectResult.INTERSECT_CROSS;
}
}
else
{
// portal norm is "inward" pointing, look for going from inside to outside
//if (previousDistance2 < mRadius2 &&
if ( currentDistance2 >= mRadius2 )
{
return PortalIntersectResult.INTERSECT_CROSS;
}
}
// no crossing, but might be touching - check distance
if ( System.Math.Sqrt( System.Math.Abs( mRadius2 - currentDistance2 ) ) <= mRadius )
{
return PortalIntersectResult.INTERSECT_NO_CROSS;
}
return PortalIntersectResult.NO_INTERSECT;
}
}
return PortalIntersectResult.NO_INTERSECT;
}