/// <summary>
/// Create from an existign Revit element
/// </summary>
/// <param name="wallType"></param>
/// <param name="isRevitOwned"></param>
/// <returns></returns>
internal static WallType FromExisting(Autodesk.Revit.DB.WallType wallType, bool isRevitOwned)
{
return(new WallType(wallType)
{
IsRevitOwned = isRevitOwned
});
}
public void SetNecessaryData(RevitDB.XYZ startPoint, RevitDB.XYZ endPoint, RevitDB.Level level, RevitDB.WallType type)
{
m_startPoint = startPoint;
m_endPoint = endPoint;
m_createlevel = level;
m_createType = type;
}
protected override void TrySolveInstance(IGH_DataAccess DA)
{
// grab input wall type
DB.WallType wallType = default;
if (!DA.GetData("Basic Wall Type", ref wallType))
{
return;
}
// make sure input wall type is a DB.WallKind.Basic
if (wallType.Kind != DB.WallKind.Basic)
{
return;
}
// grab compound structure
DA.SetData(
"Compound Structure",
new Types.DataObject <DB.CompoundStructure>(
apiObject: wallType.GetCompoundStructure(),
srcDocument: wallType.Document
)
);
// pipe the wall type parameters directly to component outputs
PipeHostParameter <Types.WallWrapping>(DA, wallType, DB.BuiltInParameter.WRAPPING_AT_INSERTS_PARAM, "Wrapping at Insert");
PipeHostParameter <Types.WallWrapping>(DA, wallType, DB.BuiltInParameter.WRAPPING_AT_ENDS_PARAM, "Wrapping at End");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.WALL_ATTR_WIDTH_PARAM, "Width");
PipeHostParameter <Types.WallFunction>(DA, wallType, DB.BuiltInParameter.FUNCTION_PARAM, "Wall Function");
}
/// <summary>
/// Initialize a Wall element
/// </summary>
/// <param name="curve"></param>
/// <param name="wallType"></param>
/// <param name="baseLevel"></param>
/// <param name="height"></param>
/// <param name="offset"></param>
/// <param name="flip"></param>
/// <param name="isStructural"></param>
private void InitWall(Curve curve, Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Level baseLevel, double height, double offset, bool flip, bool isStructural)
{
// This creates a new wall and deletes the old one
TransactionManager.Instance.EnsureInTransaction(Document);
//Phase 1 - Check to see if the object exists and should be rebound
var wallElem =
ElementBinder.GetElementFromTrace <Autodesk.Revit.DB.Wall>(Document);
bool successfullyUsedExistingWall = false;
//There was a modelcurve, try and set sketch plane
// if you can't, rebuild
if (wallElem != null && wallElem.Location is Autodesk.Revit.DB.LocationCurve)
{
var wallLocation = wallElem.Location as Autodesk.Revit.DB.LocationCurve;
if ((wallLocation.Curve is Autodesk.Revit.DB.Line == curve is Autodesk.Revit.DB.Line) ||
(wallLocation.Curve is Autodesk.Revit.DB.Arc == curve is Autodesk.Revit.DB.Arc) ||
(wallLocation.Curve is Autodesk.Revit.DB.Ellipse == curve is Autodesk.Revit.DB.Ellipse))
{
if (!CurveUtils.CurvesAreSimilar(wallLocation.Curve, curve))
{
wallLocation.Curve = curve;
}
Autodesk.Revit.DB.Parameter baseLevelParameter =
wallElem.get_Parameter(Autodesk.Revit.DB.BuiltInParameter.WALL_BASE_CONSTRAINT);
Autodesk.Revit.DB.Parameter topOffsetParameter =
wallElem.get_Parameter(Autodesk.Revit.DB.BuiltInParameter.WALL_USER_HEIGHT_PARAM);
Autodesk.Revit.DB.Parameter wallTypeParameter =
wallElem.get_Parameter(Autodesk.Revit.DB.BuiltInParameter.ELEM_TYPE_PARAM);
if (baseLevelParameter.AsElementId() != baseLevel.Id)
{
baseLevelParameter.Set(baseLevel.Id);
}
if (Math.Abs(topOffsetParameter.AsDouble() - height) > 1.0e-10)
{
topOffsetParameter.Set(height);
}
if (wallTypeParameter.AsElementId() != wallType.Id)
{
wallTypeParameter.Set(wallType.Id);
}
successfullyUsedExistingWall = true;
}
}
var wall = successfullyUsedExistingWall ? wallElem :
Autodesk.Revit.DB.Wall.Create(Document, curve, wallType.Id, baseLevel.Id, height, offset, flip, isStructural);
InternalSetWall(wall);
TransactionManager.Instance.TransactionTaskDone();
// delete the element stored in trace and add this new one
ElementBinder.CleanupAndSetElementForTrace(Document, InternalWall);
}
void CommitInstance
(
Document doc, IGH_DataAccess DA, int Iteration,
Rhino.Geometry.Curve curve,
Autodesk.Revit.DB.WallType wallType,
Autodesk.Revit.DB.Level level,
bool structural,
double height
)
{
var element = PreviousElement(doc, Iteration);
try
{
if (element?.Pinned ?? true)
{
var scaleFactor = 1.0 / Revit.ModelUnits;
if (scaleFactor != 1.0)
{
height *= scaleFactor;
curve?.Scale(scaleFactor);
}
if
(
curve == null ||
curve.IsShort(Revit.ShortCurveTolerance) ||
!(curve.IsArc(Revit.VertexTolerance) || curve.IsLinear(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' must be a horizontal line or arc curve.", Params.Input[0].Name));
}
else if (level == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' no suitable level is been found.", Params.Input[3].Name));
}
else if (height < Revit.VertexTolerance)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' is too small.", Params.Input[5].Name));
}
else
{
var axisList = curve.ToHost().ToList();
Debug.Assert(axisList.Count == 1);
element = Autodesk.Revit.DB.Wall.Create(doc, axisList[0], wallType.Id, level.Id, height, axisPlane.Origin.Z - level.Elevation, false, structural);
}
}
}
/// <summary>
/// Creates a compound structure from a wall type.
/// </summary>
/// <param name="wallType">A Dynamo wrapped Revit.WallType.</param>
/// <param name="document">An unwrapped document associated with the CompoundStructure.</param>
/// <returns name="compoundStructure">A Compound Structure.</returns>
public static CompoundStructure FromWallType(dynamoElements.WallType wallType,
[DefaultArgument("Synthetic.Revit.Document.Current()")] revitDoc document)
{
revitDB.WallType unwrappedWall = (revitDB.WallType)wallType.InternalElement;
revitCS compoundStructure = unwrappedWall.GetCompoundStructure();
if (compoundStructure != null)
{
return(new CompoundStructure(compoundStructure, document));
}
else
{
return(null);
}
}
/// <summary>
/// Gets the compound structure from a wall type.
/// </summary>
/// <param name="WallType">A Dynamo wrapped Revit.WallType</param>
/// <returns name="CompoundStructure">A Compound Structure</returns>
public static CompoundStructure GetCompoundStructure(dynaWallType WallType)
{
revitDB.WallType unwrappedWall = (revitDB.WallType)WallType.InternalElement;
revitDoc document = unwrappedWall.Document;
revitCS compoundStructure = unwrappedWall.GetCompoundStructure();
if (compoundStructure != null)
{
return(new CompoundStructure(compoundStructure, document));
}
else
{
return(null);
}
}
/// <summary>
/// Initialize a Wall element
/// </summary>
/// <param name="location"></param>
/// <param name="wallType"></param>
/// <param name="reference"></param>
private void InitFaceWall(WallLocationLine location, Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Reference reference)
{
TransactionManager.Instance.EnsureInTransaction(Document);
// there is no way of comparing the existing element to the new reference.
// that's why the wall will be recreated.
var wall = Autodesk.Revit.DB.FaceWall.Create(Document, wallType.Id, location, reference);
InternalSetFaceWall(wall);
TransactionManager.Instance.TransactionTaskDone();
ElementBinder.CleanupAndSetElementForTrace(Document, InternalFaceWall);
}
/// <summary>
/// Replaces a Wall Type's compound structure with the given one. Please note that the compound structure's materials and the wall type must be in the same document or unexpected results may occur.
/// </summary>
/// <param name="WallType">The wall type to be modified.</param>
/// <param name="compoundStructure">A compound structure</param>
/// <returns name="wallType">The modified wall type.</returns>
public static dynamoElements.WallType ToWallType(dynamoElements.WallType WallType, CompoundStructure compoundStructure)
{
revitDB.WallType revitWallType = (revitDB.WallType)WallType.InternalElement;
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(compoundStructure.internalDocument))
{
try
{
trans.Start("Apply Structure to Wall Type");
revitWallType.SetCompoundStructure(compoundStructure.internalCompoundStructure);
trans.Commit();
}
catch
{
revitWallType.SetCompoundStructure(compoundStructure.internalCompoundStructure);
}
}
return(WallType);
}
/// <summary>
/// Replaces a Wall Type's compound structure with the given one. Please note that the compound structure's materials and the wall type must be in the same document or unexpected results may occur.
/// </summary>
/// <param name="WallType">The wall type to be modified.</param>
/// <param name="compoundStructure">A compound structure</param>
/// <returns name="WallType">The modified wall type.</returns>
public static dynaWallType SetCompoundStructure(dynaWallType WallType, CompoundStructure compoundStructure)
{
revitDB.WallType revitWallType = (revitDB.WallType)WallType.InternalElement;
revitDoc document = compoundStructure.internalDocument;
if (document.IsModifiable)
{
TransactionManager.Instance.EnsureInTransaction(document);
revitWallType.SetCompoundStructure(compoundStructure.internalCompoundStructure);
TransactionManager.Instance.TransactionTaskDone();
}
else
{
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(document))
{
trans.Start("Apply Structure to Wall Type");
revitWallType.SetCompoundStructure(compoundStructure.internalCompoundStructure);
trans.Commit();
}
}
return(WallType);
}
protected override void TrySolveInstance(IGH_DataAccess DA)
{
// grab input wall type
DB.WallType wallType = default;
if (!DA.GetData("Curtain Wall Type", ref wallType))
{
return;
}
if (wallType.Kind == DB.WallKind.Curtain)
{
// properties of the wall type
PipeHostParameter(DA, wallType, DB.BuiltInParameter.FUNCTION_PARAM, "Function");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.ALLOW_AUTO_EMBED, "Automatically Embed");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_PANEL_WALL, "Curtain Panel");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_JOIN_CONDITION_WALL, "Join Condition");
// layout (vertical)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LAYOUT_VERT, "Vertical Grid : Layout");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LENGTH_VERT, "Vertical Grid : Spacing");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.CURTAINGRID_ADJUST_BORDER_VERT, "Vertical Grid : Adjust for Mullion Size");
// layout (horizontal)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LAYOUT_HORIZ, "Horizontal Grid : Layout");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LENGTH_HORIZ, "Horizontal Grid : Spacing");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.CURTAINGRID_ADJUST_BORDER_HORIZ, "Horizontal Grid : Adjust for Mullion Size");
// mullion types(vertical)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_INTERIOR_VERT, "Vertical Mullions : Interior Type");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER1_VERT, "Vertical Mullions : Border 1 Type");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER2_VERT, "Vertical Mullions : Border 2 Type");
// mullion types (horizontal)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_INTERIOR_HORIZ, "Horizontal Mullions : Interior Type");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER1_HORIZ, "Horizontal Mullions : Border 1 Type");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER2_HORIZ, "Horizontal Mullions : Border 2 Type");
}
}
protected override void TrySolveInstance(IGH_DataAccess DA)
{
// grab input wall type
DB.WallType wallType = default;
if (!DA.GetData("Curtain Wall Type", ref wallType))
{
return;
}
if (wallType.Kind == DB.WallKind.Curtain)
{
// properties of the wall type
PipeHostParameter <Types.WallFunction>(DA, wallType, DB.BuiltInParameter.FUNCTION_PARAM, "Wall Function");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.ALLOW_AUTO_EMBED, "Automatically Embed?");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_PANEL_WALL, "Curtain Panel Type");
PipeHostParameter <Types.CurtainGridJoinCondition>(DA, wallType, DB.BuiltInParameter.AUTO_JOIN_CONDITION_WALL, "Curtain Grid Join Condition");
// layout (vertical)
PipeHostParameter <Types.CurtainGridLayout>(DA, wallType, DB.BuiltInParameter.SPACING_LAYOUT_VERT, "Vertical Grid Layout (U Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LENGTH_VERT, "Vertical Grid Spacing (U Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.CURTAINGRID_ADJUST_BORDER_VERT, "Vertical Grid Adjust for Mullion Size? (U Axis)");
// layout (horizontal)
PipeHostParameter <Types.CurtainGridLayout>(DA, wallType, DB.BuiltInParameter.SPACING_LAYOUT_HORIZ, "Horizontal Grid Layout (V Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.SPACING_LENGTH_HORIZ, "Horizontal Grid Spacing (V Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.CURTAINGRID_ADJUST_BORDER_HORIZ, "Horizontal Grid Adjust for Mullion Size? (V Axis)");
// mullion types(vertical)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_INTERIOR_VERT, "Vertical Interior Mullion Type (U Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER1_VERT, "Vertical Start Mullion Type (U Axis / Border 1)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER2_VERT, "Vertical End Mullion Type (U Axis / Border 2)");
// mullion types (horizontal)
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_INTERIOR_HORIZ, "Horizontal Interior Mullion Type (V Axis)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER1_HORIZ, "Horizontal Bottom Mullion Type (V Axis / Border 1)");
PipeHostParameter(DA, wallType, DB.BuiltInParameter.AUTO_MULLION_BORDER2_HORIZ, "Horizontal Top Mullion Type (V Axis / Border 2)");
}
}
private void ReadJournalData()
{
RevitDB.Document doc = m_commandData.Application.ActiveUIDocument.Document;
IDictionary <string, string> dataMap = m_commandData.JournalData;
string dataValue = null;
dataValue = GetSpecialData(dataMap, "Wall Type Name");
foreach (RevitDB.WallType type in m_wallTypeList)
{
if (dataValue == type.Name)
{
m_createType = type;
break;
}
}
if (null == m_createType)
{
throw new InvalidDataException("Can't find the wall type from the journal.");
}
dataValue = GetSpecialData(dataMap, "Level Id");
RevitDB.ElementId id = new RevitDB.ElementId(Convert.ToInt32(dataValue));
m_createlevel = doc.GetElement(id) as RevitDB.Level;
if (null == m_createlevel)
{
throw new InvalidDataException("Can't find the level from the journal.");
}
dataValue = GetSpecialData(dataMap, "Start Point");
m_startPoint = StringToXYZ(dataValue);
if (m_startPoint.Equals(m_endPoint))
{
throw new InvalidDataException("Start point is equal to end point.");
}
}
/// <summary>
/// Converts Face3D to Wall
/// </summary>
/// <param name="face3D">SAM Geometry Face3D</param>
/// <param name="document">Revit Document</param>
/// <param name="wallType">Revit WallType. Default WallType will be used if null</param>
/// <param name="level">Revit Level. Low Level for Face3D will be used if null</param>
/// <returns>Revit Wall</returns>
public static Autodesk.Revit.DB.Wall ToRevit_Wall(this Geometry.Spatial.Face3D face3D, Document document, Autodesk.Revit.DB.WallType wallType = null, Level level = null)
{
if (face3D == null || document == null)
{
return(null);
}
if (face3D.GetArea() < Core.Tolerance.MacroDistance)
{
return(null);
}
Geometry.Spatial.Vector3D normal = face3D.GetPlane().Normal;
if (normal == null)
{
return(null);
}
if (wallType == null)
{
ElementId elementId = document.Settings.Categories.get_Item(BuiltInCategory.OST_Walls).Id;
if (elementId != null && elementId != ElementId.InvalidElementId)
{
elementId = document.GetDefaultFamilyTypeId(elementId);
if (elementId != null && elementId != ElementId.InvalidElementId)
{
wallType = document.GetElement(elementId) as Autodesk.Revit.DB.WallType;
}
}
}
if (wallType == null)
{
return(null);
}
if (level == null)
{
double elevation = Geometry.Revit.Convert.ToRevit(face3D.GetBoundingBox().Min).Z;
level = Core.Revit.Query.LowLevel(document, elevation);
}
if (level == null)
{
return(null);
}
List <CurveLoop> curveLoops = Geometry.Revit.Convert.ToRevit(face3D);
curveLoops?.RemoveAll(x => x == null);
if (curveLoops == null || curveLoops.Count == 0)
{
return(null);
}
XYZ xyz_Normal = Geometry.Revit.Convert.ToRevit(normal, false);
if (curveLoops.Count == 1)
{
return(Autodesk.Revit.DB.Wall.Create(document, curveLoops[0].ToList(), wallType.Id, level.Id, false, xyz_Normal));
}
//The Wall.Create method requires the curveLoops to be in either all counter-clockwise direction or all clockwise direction.
for (int i = 0; i < curveLoops.Count; i++)
{
if (curveLoops[i].IsCounterclockwise(xyz_Normal))
{
curveLoops[i].Flip();
}
}
List <Curve> curves = new List <Curve>();
//According to https://forums.autodesk.com/t5/revit-api-forum/wall-create-by-profile/td-p/8961085
//CurveLoops have to be organised in correct order. Hypothesis :
//If the curveLoop contains 1 (or more) vertical Line(s), the vertical line should be the first to add to the List.
foreach (CurveLoop curveLoop in curveLoops)
{
List <Curve> curves_Temp = curveLoop?.ToList();
if (curveLoop == null)
{
continue;
}
List <Curve> curves_Postponed = new List <Curve>();
int startindex = 0;
while (startindex < curves_Temp.Count)
{
Curve curve = curves_Temp[startindex];
if (!(curve is Line))
{
curves_Postponed.Add(curve);
startindex++;
continue;
}
XYZ dir = curve.GetEndPoint(1).Subtract(curve.GetEndPoint(0)).Normalize();
if (!dir.IsAlmostEqualTo(XYZ.BasisZ) && !dir.IsAlmostEqualTo(XYZ.BasisZ.Negate()))
{
curves_Postponed.Add(curve);
startindex++;
}
else
{
break;
}
}
for (int i = startindex; i < curves_Temp.Count; i++)
{
Curve curve = curves_Temp[i];
curves.Add(curve);
}
if (curves_Postponed.Count > 0)
{
curves.AddRange(curves_Postponed);
}
}
if (curves == null || curves.Count == 0)
{
return(null);
}
return(Autodesk.Revit.DB.Wall.Create(document, curves, wallType.Id, level.Id, false, xyz_Normal));
}
public static Autodesk.Revit.DB.Wall CopyWall(this Document document, IEnumerable <Reference> references, Level level_Bottom, Level level_Top)
{
if (document == null || references == null || references.Count() < 1 || level_Bottom == null || level_Top == null)
{
return(null);
}
Dictionary <BuiltInCategory, FamilySymbol> dictionary_FamilySymbol = new Dictionary <BuiltInCategory, FamilySymbol>();
dictionary_FamilySymbol.Add(BuiltInCategory.OST_Windows, new FilteredElementCollector(document).OfCategory(BuiltInCategory.OST_Windows).OfClass(typeof(FamilySymbol)).Cast <FamilySymbol>().ToList().Find(x => x.Name == "SIM_EXT_GLZ"));
dictionary_FamilySymbol.Add(BuiltInCategory.OST_Doors, new FilteredElementCollector(document).OfCategory(BuiltInCategory.OST_Doors).OfClass(typeof(FamilySymbol)).Cast <FamilySymbol>().ToList().Find(x => x.Name == "SIM_INT_SLD"));
Autodesk.Revit.DB.Wall result = null;
Dictionary <ElementId, Tuple <Document, Dictionary <ElementId, List <FamilyInstance> > > > dictionary = new Dictionary <ElementId, Tuple <Document, Dictionary <ElementId, List <FamilyInstance> > > >();
using (Transaction transaction = new Transaction(document, "Copy Wall"))
{
transaction.Start();
foreach (Reference reference in references)
{
if (reference.ElementId == null || reference.ElementId == ElementId.InvalidElementId)
{
continue;
}
if (reference.LinkedElementId == null || reference.LinkedElementId == ElementId.InvalidElementId)
{
continue;
}
RevitLinkInstance revitLinkInstance = document.GetElement(reference.ElementId) as RevitLinkInstance;
if (revitLinkInstance == null)
{
continue;
}
Tuple <Document, Dictionary <ElementId, List <FamilyInstance> > > tuple = null;
if (!dictionary.TryGetValue(revitLinkInstance.Id, out tuple))
{
Document document_RevitLinkInstance = revitLinkInstance.GetLinkDocument();
List <ElementFilter> elementFilters = new List <ElementFilter>();
elementFilters.Add(new ElementCategoryFilter(BuiltInCategory.OST_Doors));
elementFilters.Add(new ElementCategoryFilter(BuiltInCategory.OST_Windows));
List <FamilyInstance> familyInstances = new FilteredElementCollector(document_RevitLinkInstance).OfClass(typeof(FamilyInstance)).WherePasses(new LogicalOrFilter(elementFilters)).Cast <FamilyInstance>().ToList();
Dictionary <ElementId, List <FamilyInstance> > dictionary_FamilyInstance = new Dictionary <ElementId, List <FamilyInstance> >();
foreach (FamilyInstance familyInstance in familyInstances)
{
if (familyInstance.Host == null || familyInstance.Host.Id == null || familyInstance.Host.Id == ElementId.InvalidElementId)
{
continue;
}
List <FamilyInstance> familyInstances_Temp = null;
if (!dictionary_FamilyInstance.TryGetValue(familyInstance.Host.Id, out familyInstances_Temp))
{
familyInstances_Temp = new List <FamilyInstance>();
dictionary_FamilyInstance.Add(familyInstance.Host.Id, familyInstances_Temp);
}
familyInstances_Temp.Add(familyInstance);
}
tuple = new Tuple <Document, Dictionary <ElementId, List <FamilyInstance> > >(document_RevitLinkInstance, dictionary_FamilyInstance);
dictionary.Add(revitLinkInstance.Id, tuple);
}
if (tuple.Item1 == null)
{
continue;
}
Element element = tuple.Item1.GetElement(reference.LinkedElementId);
if (element == null)
{
continue;
}
if (element is Autodesk.Revit.DB.Wall)
{
Autodesk.Revit.DB.Wall wall = element as Autodesk.Revit.DB.Wall;
Autodesk.Revit.DB.WallType wallType = UpdateWallType(document, wall);
result = CopyWall(wallType, wall, level_Bottom, level_Top, tuple.Item2, dictionary_FamilySymbol);
}
}
transaction.Commit();
}
return(result);
}
private static Autodesk.Revit.DB.Wall CopyWall(Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Wall Wall, Level level_Bottom, Level level_Top, Dictionary <ElementId, List <FamilyInstance> > dictionary_Hosts, Dictionary <BuiltInCategory, FamilySymbol> dictionary_Symbols)
{
if (wallType == null || Wall == null)
{
return(null);
}
if (!(Wall.Location is LocationCurve))
{
return(null);
}
LocationCurve locationCurve = Wall.Location as LocationCurve;
Document document = wallType.Document;
Autodesk.Revit.DB.Wall result = Autodesk.Revit.DB.Wall.Create(wallType.Document, locationCurve.Curve, level_Bottom.Id, false);
result.WallType = wallType;
//FamilyInstance aFamilyInstance = aDocument.Create.NewFamilyInstance(aLocationCurve.Curve, ElementType, Level_Bottom, Autodesk.Revit.DB.Structure.StructuralType.NonStructural);
if (result == null)
{
return(null);
}
if (Wall.Flipped != result.Flipped)
{
result.Flip();
}
Parameter parameter = null;
if (level_Top.Elevation > level_Bottom.Elevation)
{
parameter = result.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE);
if (parameter != null)
{
parameter.Set(level_Top.Id);
}
}
else
{
parameter = result.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM);
if (parameter != null && !parameter.IsReadOnly)
{
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
parameter.Set(UnitUtils.ConvertToInternalUnits(2000, DisplayUnitType.DUT_MILLIMETERS));
#else
parameter.Set(UnitUtils.ConvertToInternalUnits(2000, UnitTypeId.Millimeters));
#endif
}
}
parameter = result.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS);
if (parameter != null)
{
parameter.Set(Wall.Id.IntegerValue.ToString());
}
document.Regenerate();
AddHosts(result, Wall.Id, dictionary_Hosts, dictionary_Symbols);
return(result);
}
/// <summary>
/// Create a new instance of WallType, deleting the original
/// </summary>
/// <param name="curve"></param>
/// <param name="wallType"></param>
/// <param name="baseLevel"></param>
/// <param name="height"></param>
/// <param name="offset"></param>
/// <param name="flip"></param>
/// <param name="isStructural"></param>
private Wall(Curve curve, Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Level baseLevel,
double height, double offset, bool flip, bool isStructural)
{
SafeInit(() => InitWall(curve, wallType, baseLevel, height, offset, flip, isStructural));
}
public static Autodesk.Revit.DB.WallType UpdateWallType(this Document document, Autodesk.Revit.DB.Wall wall)
{
List <Autodesk.Revit.DB.WallType> wallTypes = new FilteredElementCollector(document).OfCategory(BuiltInCategory.OST_Walls).OfClass(typeof(Autodesk.Revit.DB.WallType)).Cast <Autodesk.Revit.DB.WallType>().ToList();
if (wallTypes == null || wallTypes.Count < 1)
{
return(null);
}
Autodesk.Revit.DB.WallType wallType = null;
foreach (Autodesk.Revit.DB.WallType wallType_Temp in wallTypes)
{
Parameter parameter = wallType_Temp.LookupParameter("SAM_BuildingElementDescription");
if (parameter != null)
{
string value = parameter.AsString();
if (!string.IsNullOrEmpty(value) && value == wall.Name)
{
wallType = wallType_Temp;
break;
}
}
}
if (wallType == null)
{
string name = string.Format("ARCH_Wall_{0}", wall.Name);
wallType = wallTypes.Find(x => x.Name == name);
if (wallType == null)
{
wallType = wallTypes.Find(x => x.Name == "ARCH_Wall");
if (wallType == null)
{
wallType = wallTypes.First();
wallType = wallType.Duplicate(name) as Autodesk.Revit.DB.WallType;
}
}
if (wallType == null)
{
return(null);
}
Element element = wall.Document.GetElement(wall.GetTypeId());
if (element == null)
{
return(wallType);
}
Parameter parameter_Source = null;
Parameter parameter_Destination = null;
parameter_Source = element.get_Parameter(BuiltInParameter.WALL_ATTR_WIDTH_PARAM);
if (parameter_Source != null)
{
parameter_Destination = wallType.LookupParameter("SAM_BuildingElementThickness");
if (parameter_Destination != null)
{
parameter_Destination.Set(parameter_Source.AsDouble());
}
}
parameter_Source = element.get_Parameter(BuiltInParameter.FUNCTION_PARAM);
if (parameter_Source != null)
{
parameter_Destination = wallType.LookupParameter("SAM_BuildingElementDescription");
if (parameter_Destination != null)
{
parameter_Destination.Set(name);
}
parameter_Destination = wallType.get_Parameter(BuiltInParameter.FUNCTION_PARAM);
if (parameter_Destination != null)
{
parameter_Destination.Set(parameter_Destination.AsInteger());
}
}
}
return(wallType);
}
public static WallType Wrap(Autodesk.Revit.DB.WallType ele, bool isRevitOwned)
{
return(WallType.FromExisting(ele, isRevitOwned));
}
void CommitInstance
(
Document doc, IGH_DataAccess DA, int Iteration,
Rhino.Geometry.Curve curve,
Autodesk.Revit.DB.WallType wallType,
Autodesk.Revit.DB.Level level,
bool structural,
double height
)
{
var element = PreviousElement(doc, Iteration);
try
{
if (element?.Pinned ?? true)
{
var scaleFactor = 1.0 / Revit.ModelUnits;
if (scaleFactor != 1.0)
{
height *= scaleFactor;
curve?.Scale(scaleFactor);
}
if
(
curve == null ||
curve.IsShort(Revit.ShortCurveTolerance) ||
!(curve.IsArc(Revit.VertexTolerance) || curve.IsLinear(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' must be a horizontal line or arc curve.", Params.Input[0].Name));
}
else if (level == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' no suitable level is been found.", Params.Input[3].Name));
}
else if (height < Revit.VertexTolerance)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("Parameter '{0}' is too small.", Params.Input[5].Name));
}
else
{
var axisList = curve.ToHost().ToList();
Debug.Assert(axisList.Count == 1);
if (element != null && wallType.Id != element.GetTypeId())
{
var newElmentId = element.ChangeTypeId(wallType.Id);
if (newElmentId != ElementId.InvalidElementId)
{
element = doc.GetElement(newElmentId);
}
}
if (element is Wall wall && element?.Location is LocationCurve locationCurve)
{
locationCurve.Curve = axisList[0];
wall.get_Parameter(BuiltInParameter.WALL_BASE_OFFSET).Set(0.0);
wall.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM).Set(height);
}
else
{
element = Autodesk.Revit.DB.Wall.Create(doc, axisList[0], wallType.Id, level.Id, height, axisPlane.Origin.Z - level.Elevation, false, structural);
}
}
/// <summary>
/// Construct from an existing Revit Element
/// </summary>
/// <param name="type"></param>
private WallType(Autodesk.Revit.DB.WallType type) : base(type)
{
}
void CommitInstance
(
Document doc, IGH_DataAccess DA, int Iteration,
Rhino.Geometry.Curve curve,
Autodesk.Revit.DB.WallType wallType,
Autodesk.Revit.DB.Level level,
bool structural,
double height,
WallLocationLine locationLine
)
{
var element = PreviousElement(doc, Iteration);
if (!element?.Pinned ?? false)
{
ReplaceElement(doc, DA, Iteration, element);
}
else
{
try
{
var scaleFactor = 1.0 / Revit.ModelUnits;
if (scaleFactor != 1.0)
{
height *= scaleFactor;
curve?.Scale(scaleFactor);
}
if
(
curve == null ||
curve.IsShort(Revit.ShortCurveTolerance) ||
!(curve.IsArc(Revit.VertexTolerance) || curve.IsLinear(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
throw new Exception(string.Format("Parameter '{0}' must be a horizontal line or arc curve.", Params.Input[0].Name));
}
if (level == null)
{
throw new Exception(string.Format("Parameter '{0}' no suitable level is been found.", Params.Input[2].Name));
}
if (height < Revit.VertexTolerance)
{
throw new Exception(string.Format("Parameter '{0}' is too small.", Params.Input[4].Name));
}
var axisList = curve.ToHost().ToList();
Debug.Assert(axisList.Count == 1);
var axis = axisList[0];
double offsetDist = wallType.GetCompoundStructure().GetOffsetForLocationLine(locationLine);
if (offsetDist != 0.0)
{
axis = axis.CreateOffset(offsetDist, XYZ.BasisZ);
}
if (element != null && wallType.Id != element.GetTypeId())
{
var newElmentId = element.ChangeTypeId(wallType.Id);
if (newElmentId != ElementId.InvalidElementId)
{
element = doc.GetElement(newElmentId);
ReplaceElement(doc, DA, Iteration, element);
}
}
if (element is Wall wall && element?.Location is LocationCurve locationCurve && axisList[0].IsSameKindAs(locationCurve.Curve))
{
locationCurve.Curve = axis;
wall.get_Parameter(BuiltInParameter.WALL_BASE_CONSTRAINT).Set(level.Id);
wall.get_Parameter(BuiltInParameter.WALL_BASE_OFFSET).Set(0.0);
wall.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM).Set(height);
}
else
{
element = CopyParametersFrom(Wall.Create(doc, axis, wallType.Id, level.Id, height, axisPlane.Origin.Z - level.Elevation, false, structural), element);
}
element?.get_Parameter(BuiltInParameter.WALL_KEY_REF_PARAM).Set((int)locationLine);
ReplaceElement(doc, DA, Iteration, element);
}
/// <summary>
/// Create a new instance of WallType, deleting the original
/// </summary>
/// <param name="location"></param>
/// <param name="wallType"></param>
/// <param name="reference"></param>
private FaceWall(WallLocationLine location, Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Reference reference)
{
SafeInit(() => InitFaceWall(location, wallType, reference));
}
