/// <summary>
/// Construct a Revit ModelCurve element from an existing element.
/// </summary>
/// <param name="curveByPoints"></param>
/// <param name="isRevitOwned"></param>
/// <returns></returns>
internal static CurveByPoints FromExisting(Autodesk.Revit.DB.CurveByPoints curveByPoints, bool isRevitOwned)
{
return(new CurveByPoints(curveByPoints)
{
IsRevitOwned = isRevitOwned
});
}
public void CurveByPoints()
{
var model = dynSettings.Controller.DynamoModel;
string samplePath = Path.Combine(_testPath, @".\CurveByPoints.dyn");
string testPath = Path.GetFullPath(samplePath);
model.Open(testPath);
//cerate some points and wire them
//to the selections
ReferencePoint p1, p2, p3, p4;
using (_trans = new Transaction(dynRevitSettings.Doc.Document))
{
_trans.Start("Create reference points for testing.");
p1 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(1, 5, 12));
p2 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 1, 12));
p3 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(12, 1, 5));
p4 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 12, 1));
_trans.Commit();
}
var ptSelectNodes = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is PointBySelection);
if (!ptSelectNodes.Any())
{
Assert.Fail("Could not find point selection nodes in dynamo graph.");
}
((PointBySelection)ptSelectNodes.ElementAt(0)).SelectedElement = p1;
((PointBySelection)ptSelectNodes.ElementAt(1)).SelectedElement = p2;
((PointBySelection)ptSelectNodes.ElementAt(2)).SelectedElement = p3;
((PointBySelection)ptSelectNodes.ElementAt(3)).SelectedElement = p4;
dynSettings.Controller.RunExpression(true);
FilteredElementCollector fec = new FilteredElementCollector(dynRevitSettings.Doc.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsTrue(mc.IsReferenceLine);
//now flip the switch for creating a reference curve
var boolNode = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is BoolSelector).First();
((BasicInteractive <bool>)boolNode).Value = false;
dynSettings.Controller.RunExpression(true);
Assert.AreEqual(fec.ToElements().Count(), 1);
mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsFalse(mc.IsReferenceLine);
}
public Autodesk.Revit.DB.CurveByPoints MakeLineCBP(Document doc, XYZ ptA, XYZ ptB)
{
ReferencePoint sunRP = doc.FamilyCreate.NewReferencePoint(ptA);
ReferencePoint originRP = doc.FamilyCreate.NewReferencePoint(ptB);
ReferencePointArray sunRPArray = new ReferencePointArray();
sunRPArray.Append(sunRP);
sunRPArray.Append(originRP);
Autodesk.Revit.DB.CurveByPoints sunPath = doc.FamilyCreate.NewCurveByPoints(sunRPArray);
return(sunPath);
}
public void CurvebyPointsEllipse()
{
string samplePath = Path.Combine(_testPath, @".\Curve\CurvebyPointsEllipse.dyn");
string testPath = Path.GetFullPath(samplePath);
ViewModel.OpenCommand.Execute(testPath);
Assert.DoesNotThrow(() => ViewModel.Model.RunExpression());
FilteredElementCollector fec = new FilteredElementCollector(DocumentManager.Instance.CurrentUIDocument.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
}
public void CurvebyPointsArc()
{
var model = dynSettings.Controller.DynamoModel;
string samplePath = Path.Combine(_testPath, @".\CurvebyPointsArc.dyn");
string testPath = Path.GetFullPath(samplePath);
model.Open(testPath);
Assert.DoesNotThrow(() => dynSettings.Controller.RunExpression(true));
FilteredElementCollector fec = new FilteredElementCollector(dynRevitSettings.Doc.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
}
public override Value Evaluate(FSharpList <Value> args)
{
bool isRefCurve = Convert.ToBoolean(((Value.Number)args[1]).Item);
//Build a sequence that unwraps the input list from it's Value form.
IEnumerable <ReferencePoint> refPts = ((Value.List)args[0]).Item.Select(
x => (ReferencePoint)((Value.Container)x).Item
);
//Add all of the elements in the sequence to a ReferencePointArray.
ReferencePointArray refPtArr = new ReferencePointArray();
foreach (var refPt in refPts)
{
refPtArr.Append(refPt);
}
//Standard logic for updating an old result, if it exists.
if (this.Elements.Any())
{
if (dynUtils.TryGetElement(this.Elements[0], out c))
{
c.SetPoints(refPtArr);
}
else
{
//TODO: This method of handling bad elements may cause problems. Instead of overwriting
// index in Elements, might be better to just add it the Elements and then do
// this.DeleteElement(id, true) on the old index.
c = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPtArr);
this.Elements[0] = c.Id;
}
}
else
{
c = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPtArr);
this.Elements.Add(c.Id);
}
c.IsReferenceLine = isRefCurve;
return(Value.NewContainer(c));
}
private Autodesk.Revit.DB.CurveByPoints CreateCurveByPoints(Autodesk.Revit.DB.CurveByPoints c, Curve gc, XYZ start, XYZ end)
{
//Add the geometry curves start and end points to a ReferencePointArray.
ReferencePointArray refPtArr = new ReferencePointArray();
if (gc.GetType() == typeof(Line))
{
ReferencePoint refPointStart = this.UIDocument.Document.FamilyCreate.NewReferencePoint(start);
ReferencePoint refPointEnd = this.UIDocument.Document.FamilyCreate.NewReferencePoint(end);
refPtArr.Append(refPointStart);
refPtArr.Append(refPointEnd);
c = dynRevitSettings.Doc.Document.FamilyCreate.NewCurveByPoints(refPtArr);
}
else if (gc.GetType() == typeof(Arc) && foundCreateArcThroughPoints)
{
Type CurveByPointsUtilsType = typeof(Autodesk.Revit.DB.CurveByPointsUtils);
MethodInfo[] curveElementMethods = CurveByPointsUtilsType.GetMethods(System.Reflection.BindingFlags.Static | System.Reflection.BindingFlags.Public);
System.String nameOfMethodSetCurve = "CreateArcThroughPoints";
foreach (MethodInfo m in curveElementMethods)
{
if (m.Name == nameOfMethodSetCurve)
{
object[] argsM = new object[4];
ReferencePoint refPointStart = this.UIDocument.Document.FamilyCreate.NewReferencePoint(start);
ReferencePoint refPointEnd = this.UIDocument.Document.FamilyCreate.NewReferencePoint(end);
XYZ midPoint = gc.Evaluate(0.5, true);
ReferencePoint refMidPoint = this.UIDocument.Document.FamilyCreate.NewReferencePoint(midPoint);
argsM[0] = this.UIDocument.Document;
argsM[1] = refPointStart;
argsM[2] = refPointEnd;
argsM[3] = refMidPoint;
c = (Autodesk.Revit.DB.CurveByPoints)m.Invoke(null, argsM);
if (c != null && c.GeometryCurve.GetType() == typeof(Arc))
{
return(c);
}
if (c != null)
{
this.DeleteElement(c.Id);
}
break;
}
}
foundCreateArcThroughPoints = false;
}
if (gc.GetType() != typeof(Line))
{
IList <XYZ> xyzList = gc.Tessellate();
int numPoints = xyzList.Count;
for (int ii = 0; ii < numPoints; ii++)
{
ReferencePoint refPoint = this.UIDocument.Document.FamilyCreate.NewReferencePoint(xyzList[ii]);
refPtArr.Append(refPoint);
}
}
c = dynRevitSettings.Doc.Document.FamilyCreate.NewCurveByPoints(refPtArr);
return(c);
}
public override Value Evaluate(FSharpList <Value> args)
{
//Our eventual output.
Autodesk.Revit.DB.CurveByPoints c = null;
var input = args[0];
Curve gc = (Curve)((Value.Container)args[0]).Item;
XYZ start = gc.get_EndPoint(0);
XYZ end = gc.get_EndPoint(1);
//If we've made any elements previously...
if (this.Elements.Any())
{
bool replaceElement = true;
//...try to get the first one...
if (dynUtils.TryGetElement(this.Elements[0], out c))
{
//..and if we do, update it's position.
ReferencePointArray existingPts = c.GetPoints();
//update the points on the curve to match
if (gc.GetType() == typeof(Line) &&
existingPts.Size == 2)
{
existingPts.get_Item(0).Position = start;
existingPts.get_Item(1).Position = end;
replaceElement = false;
}
// NOTE: there is no way I found in REVITAPI to tell if existing curve by points is arc
else if (gc.GetType() == typeof(Arc) && existingPts.Size == 3)
{
if (existingPts.Size != 3)
{
var newPts = new ReferencePointArray();
newPts.Append(existingPts.get_Item(0));
if (existingPts.Size < 3)
{
newPts.Append(this.UIDocument.Document.FamilyCreate.NewReferencePoint(gc.Evaluate(0.5, true)));
}
else
{
newPts.Append(existingPts.get_Item(1));
}
newPts.Append(existingPts.get_Item(existingPts.Size - 1));
c.SetPoints(newPts);
existingPts = c.GetPoints();
}
existingPts.get_Item(0).Position = start;
existingPts.get_Item(2).Position = end;
existingPts.get_Item(1).Position = gc.Evaluate(0.5, true);
replaceElement = false;
}
else if (gc.GetType() != typeof(Arc))
{
int nPoints = existingPts.Size;
IList <XYZ> xyzList = gc.Tessellate();
int numPoints = xyzList.Count;
if (nPoints != numPoints)
{
var newPts = new ReferencePointArray();
newPts.Append(existingPts.get_Item(0));
newPts.get_Item(0).Position = xyzList[0];
for (int iPoint = 1; iPoint < numPoints; iPoint++)
{
if (iPoint == numPoints - 1)
{
newPts.Append(existingPts.get_Item(nPoints - 1));
newPts.get_Item(iPoint).Position = xyzList[iPoint];
}
else if (iPoint < nPoints - 1)
{
newPts.Append(existingPts.get_Item(iPoint));
newPts.get_Item(iPoint).Position = xyzList[iPoint];
}
else
{
newPts.Append(this.UIDocument.Document.FamilyCreate.NewReferencePoint(xyzList[iPoint]));
}
}
if (nPoints > numPoints)
{
//have to delete as API call to SetPoints leaves points in the doc
for (int iPoint = numPoints - 1; iPoint < nPoints - 1; iPoint++)
{
this.DeleteElement(existingPts.get_Item(iPoint).Id);
}
}
c.SetPoints(newPts);
existingPts = c.GetPoints();
}
else
{
for (int iPoint = 0; iPoint < numPoints; iPoint++)
{
if (iPoint == 0)
{
existingPts.get_Item(iPoint).Position = start;
}
else if (iPoint == nPoints - 1)
{
existingPts.get_Item(iPoint).Position = end;
}
else
{
existingPts.get_Item(iPoint).Position = xyzList[iPoint];
}
}
}
replaceElement = false;
}
if (replaceElement)
{
IList <XYZ> xyzList = gc.Tessellate();
int numPoint = xyzList.Count;
double step = 1.0 / (numPoint - 1.0);
double tolerance = 0.0000001;
replaceElement = false;
for (int index = 0; index < numPoint; index++)
{
IntersectionResult projXYZ = c.GeometryCurve.Project(xyzList[index]);
if (projXYZ.XYZPoint.DistanceTo(xyzList[index]) > tolerance)
{
replaceElement = true;
break;
}
}
}
}
if (replaceElement)
{
this.DeleteElement(this.Elements[0]);
ReferencePointArray existingPts = c.GetPoints();
c = null;
c = CreateCurveByPoints(c, gc, start, end);
this.Elements[0] = c.Id;
}
}
else
{
c = CreateCurveByPoints(c, gc, start, end);
this.Elements.Add(c.Id);
}
return(Value.NewContainer(c));
}
public static CurveByPoints Wrap(Autodesk.Revit.DB.CurveByPoints ele, bool isRevitOwned)
{
return(CurveByPoints.FromExisting(ele, isRevitOwned));
}
public void CurveByPoints()
{
var model = ViewModel.Model;
string samplePath = Path.Combine(_testPath, @".\Curve\CurveByPoints.dyn");
string testPath = Path.GetFullPath(samplePath);
ViewModel.OpenCommand.Execute(testPath);
Assert.DoesNotThrow(() => ViewModel.Model.RunExpression());
//cerate some points and wire them
//to the selections
ReferencePoint p1, p2, p3, p4;
using (_trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document))
{
_trans.Start("Create reference points for testing.");
p1 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(1, 5, 12));
p2 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 1, 12));
p3 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(12, 1, 5));
p4 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 12, 1));
_trans.Commit();
}
var ptSelectNodes = ViewModel.Model.Nodes.Where(x => x is DSModelElementSelection);
if (!ptSelectNodes.Any())
{
Assert.Fail("Could not find point selection nodes in dynamo graph.");
}
((DSModelElementSelection)ptSelectNodes.ElementAt(0)).UpdateSelection(new [] { p1 });;
((DSModelElementSelection)ptSelectNodes.ElementAt(1)).UpdateSelection(new [] { p2 });
((DSModelElementSelection)ptSelectNodes.ElementAt(2)).UpdateSelection(new [] { p3 });
((DSModelElementSelection)ptSelectNodes.ElementAt(3)).UpdateSelection(new [] { p4 });
ViewModel.Model.RunExpression();
FilteredElementCollector fec = new FilteredElementCollector(DocumentManager.Instance.CurrentUIDocument.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsTrue(mc.IsReferenceLine);
//now flip the switch for creating a reference curve
var boolNode = ViewModel.Model.Nodes.Where(x => x is DSCoreNodesUI.BoolSelector).First();
((DSCoreNodesUI.BasicInteractive <bool>)boolNode).Value = false;
ViewModel.Model.RunExpression();
Assert.AreEqual(fec.ToElements().Count(), 1);
mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsFalse(mc.IsReferenceLine);
}
public override Value Evaluate(FSharpList<Value> args)
{
bool isRefCurve = Convert.ToBoolean(((Value.Number)args[1]).Item);
//Build a sequence that unwraps the input list from it's Value form.
IEnumerable<ReferencePoint> refPts = ((Value.List)args[0]).Item.Select(
x => (ReferencePoint)((Value.Container)x).Item
);
//Add all of the elements in the sequence to a ReferencePointArray.
ReferencePointArray refPtArr = new ReferencePointArray();
foreach (var refPt in refPts)
{
refPtArr.Append(refPt);
}
//Standard logic for updating an old result, if it exists.
if (this.Elements.Any())
{
if (dynUtils.TryGetElement(this.Elements[0], out c))
{
c.SetPoints(refPtArr);
}
else
{
//TODO: This method of handling bad elements may cause problems. Instead of overwriting
// index in Elements, might be better to just add it the Elements and then do
// this.DeleteElement(id, true) on the old index.
c = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPtArr);
this.Elements[0] = c.Id;
}
}
else
{
c = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPtArr);
this.Elements.Add(c.Id);
}
c.IsReferenceLine = isRefCurve;
return Value.NewContainer(c);
}
/// <summary>
/// </summary>
/// <param name="curveByPoints"></param>
private void InitCurveByPoints(Autodesk.Revit.DB.CurveByPoints curveByPoints)
{
InternalSetCurveElement(curveByPoints);
}
/// <summary>
/// Construct a model curve from the document. The result is Dynamo owned
/// </summary>
/// <param name="curveByPoints"></param>
private CurveByPoints(Autodesk.Revit.DB.CurveByPoints curveByPoints)
{
SafeInit(() => InitCurveByPoints(curveByPoints));
}