public void AddParamKeyValueSet(apOptCalculatedResultParam.OptParamKeyValueSet paramKeyValue)
{
if (_subParamKeyValues.Contains(paramKeyValue))
{
return;
}
_subParamKeyValues.Add(paramKeyValue);
_nSubParamKeyValues = _subParamKeyValues.Count;
if (_isVertexLocalMorph || _isVertexRigging)
{
if (_vertexRequest == null)
{
_vertexRequest = new apOptVertexRequest(_isVertexLocalMorph ? apOptVertexRequest.REQUEST_TYPE.VertLocal : apOptVertexRequest.REQUEST_TYPE.Rigging);
}
//변경 19.5.24 : ModifiedMeshSet을 이용할지 여부
if (paramKeyValue._modifiedMesh != null)
{
_vertexRequest.AddModMesh(paramKeyValue._modifiedMesh);
}
else if (paramKeyValue._modifiedMeshSet != null)
{
_vertexRequest.AddModMeshSet(paramKeyValue._modifiedMeshSet);
}
}
}
public void AddParamKeyValueSet(apOptCalculatedResultParam.OptParamKeyValueSet paramKeyValue)
{
if (_subParamKeyValues.Contains(paramKeyValue))
{
return;
}
_subParamKeyValues.Add(paramKeyValue);
_nSubParamKeyValues = _subParamKeyValues.Count;
}
// Get / Set
//--------------------------------------------
//-------------------------------------------------------------------------------------------------
//Control Param 보간 관련
//--------------------------------------------------------------------------------------
private void MakeControlParamLerpAreas()
{
//1. ParamSetKeyValue => Point를 만든다.
_cpLerpAreas.Clear();
_cpLerpPoints.Clear();
apControlParam controlParam = _keyParamSetGroup._keyControlParam;
if (controlParam == null)
{
return;
}
List <float> fPosXList = new List <float>();
List <float> fPosYList = new List <float>();
float bias = 0.001f;
if (controlParam._valueType == apControlParam.TYPE.Float)
{
bias = Mathf.Abs((controlParam._float_Max - controlParam._float_Min) * 0.05f);
bias = Mathf.Clamp(bias, 0.0001f, 0.1f);
}
else if (controlParam._valueType == apControlParam.TYPE.Vector2)
{
bias = Mathf.Min(Mathf.Abs((controlParam._vec2_Max.x - controlParam._vec2_Min.x) * 0.05f),
Mathf.Abs((controlParam._vec2_Max.y - controlParam._vec2_Min.y) * 0.05f));
bias = Mathf.Clamp(bias, 0.0001f, 0.1f);
}
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
apOptCalculatedResultParam.OptParamKeyValueSet keyValueSet = _subParamKeyValues[i];
if (keyValueSet._paramSet == null)
{
continue;
}
apOptCalculatedLerpPoint newPoint = null;
switch (controlParam._valueType)
{
case apControlParam.TYPE.Int:
{
int iPos = keyValueSet._paramSet._conSyncValue_Int;
newPoint = new apOptCalculatedLerpPoint(iPos, true);
}
break;
case apControlParam.TYPE.Float:
{
float fPos = keyValueSet._paramSet._conSyncValue_Float;
newPoint = new apOptCalculatedLerpPoint(fPos, true);
}
break;
case apControlParam.TYPE.Vector2:
{
Vector2 vPos = keyValueSet._paramSet._conSyncValue_Vector2;
newPoint = new apOptCalculatedLerpPoint(vPos, true);
//위치를 저장해둔다.
AddLerpPos(vPos, fPosXList, fPosYList, bias);
}
break;
}
newPoint.AddPoint(keyValueSet, 1.0f); //실제 키는 Weight가 1이다.
_cpLerpPoints.Add(newPoint);
}
//2-1 1차원 값이면 오름차순 정렬하는 걸로 끝
switch (controlParam._valueType)
{
case apControlParam.TYPE.Int:
_cpLerpPoints.Sort(delegate(apOptCalculatedLerpPoint a, apOptCalculatedLerpPoint b)
{
return(a._iPos - b._iPos);
});
break;
case apControlParam.TYPE.Float:
_cpLerpPoints.Sort(delegate(apOptCalculatedLerpPoint a, apOptCalculatedLerpPoint b)
{
return((int)((a._pos.x - b._pos.x) * (1.0f / bias) * 100.0f));
});
break;
}
//2-2. (Vector2인 경우) Rect Area를 만들자.
if (controlParam._valueType == apControlParam.TYPE.Vector2)
{
//1) Min, Max 위치에 대해서 확인 후 가상 포인트를 추가하자
//2) X, Y 값에 대해서 정렬
//3) X, Y 좌표를 순회하면서 "포인트가 없다면" 가상 포인트를 추가하자
//4) X, Y 좌표 순회하면서 RectArea를 만들자.
//1)
float minX = controlParam._vec2_Min.x;
float minY = controlParam._vec2_Min.y;
float maxX = controlParam._vec2_Max.x;
float maxY = controlParam._vec2_Max.y;
MakeVirtualLerpPoint(new Vector2(minX, minY), bias);
MakeVirtualLerpPoint(new Vector2(minX, minY), bias);
MakeVirtualLerpPoint(new Vector2(minX, minY), bias);
MakeVirtualLerpPoint(new Vector2(minX, minY), bias);
//Min/Max 위치를 추가로 저장해둔다.
AddLerpPos(new Vector2(minX, minY), fPosXList, fPosYList, bias);
AddLerpPos(new Vector2(minX, maxY), fPosXList, fPosYList, bias);
AddLerpPos(new Vector2(maxX, minY), fPosXList, fPosYList, bias);
AddLerpPos(new Vector2(maxX, maxY), fPosXList, fPosYList, bias);
//2) 위치 정렬
fPosXList.Sort(delegate(float a, float b)
{
return((int)((a - b) * (1.0f / bias) * 1000.0f));
});
fPosYList.Sort(delegate(float a, float b)
{
return((int)((a - b) * (1.0f / bias) * 1000.0f));
});
//3) 좌표 순회하면서 포인트 추가
for (int iX = 0; iX < fPosXList.Count; iX++)
{
for (int iY = 0; iY < fPosYList.Count; iY++)
{
MakeVirtualLerpPoint(new Vector2(fPosXList[iX], fPosYList[iY]), bias);
}
}
apOptCalculatedLerpPoint pointLT = null;
apOptCalculatedLerpPoint pointRT = null;
apOptCalculatedLerpPoint pointLB = null;
apOptCalculatedLerpPoint pointRB = null;
//4) 좌표 순회하면서 RectArea 만들기
for (int iX = 0; iX < fPosXList.Count - 1; iX++)
{
for (int iY = 0; iY < fPosYList.Count - 1; iY++)
{
pointLT = GetLerpPoint(new Vector2(fPosXList[iX], fPosYList[iY]), bias);
pointRT = GetLerpPoint(new Vector2(fPosXList[iX + 1], fPosYList[iY]), bias);
pointLB = GetLerpPoint(new Vector2(fPosXList[iX], fPosYList[iY + 1]), bias);
pointRB = GetLerpPoint(new Vector2(fPosXList[iX + 1], fPosYList[iY + 1]), bias);
apOptCalculatedLerpArea lerpArea = new apOptCalculatedLerpArea(pointLT, pointRT, pointLB, pointRB);
_cpLerpAreas.Add(lerpArea);
}
}
}
}
//---------------------------------------------------
// 계산함수 - KeyFrame
//---------------------------------------------------
private void CalculateWeight_KeyFrame()
{
if (_keyParamSetGroup == null || _keyParamSetGroup._keyAnimTimelineLayer == null)
{
return;
}
apAnimTimelineLayer timlineLayer = _keyParamSetGroup._keyAnimTimelineLayer;
apOptCalculatedResultParam.OptParamKeyValueSet curParamKeyValue = null;
//9.26 : 이거 수정해야한다.
//Int형 프레임과 Float형 프레임을 둘다 사용한다.
int curFrame = timlineLayer._parentAnimClip.CurFrame;
float curFrameFloat = timlineLayer._parentAnimClip.CurFrameFloat; //<<이건 실수형
bool isLoop = timlineLayer._parentAnimClip.IsLoop;
//apAnimKeyframe firstKeyframe = timlineLayer._firstKeyFrame;
//apAnimKeyframe lastKeyframe = timlineLayer._lastKeyFrame;
_totalWeight = 0.0f;
apAnimKeyframe curKeyframe = null;
apAnimKeyframe prevKeyframe = null;
apAnimKeyframe nextKeyframe = null;
//int indexOffsetA = 0;
//int indexOffsetB = 0;
int lengthFrames = timlineLayer._parentAnimClip.EndFrame - timlineLayer._parentAnimClip.StartFrame;
int tmpCurFrameInt = 0;
float tmpCurFrameFloat = 0;
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
curParamKeyValue = _subParamKeyValues[i];
curParamKeyValue._dist = -10.0f;
curParamKeyValue._isCalculated = false;
curParamKeyValue._weight = 0.0f;
//추가 12.5
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.NotCalculated;
//유효하지 않은 키프레임이면 처리하지 않는다.
if (curParamKeyValue._paramSet.SyncKeyframe == null ||
!curParamKeyValue._paramSet.SyncKeyframe._isActive)
{
//Debug.Log("[" + i + "] Not Active or Null Keyframe");
continue;
}
curKeyframe = curParamKeyValue._paramSet.SyncKeyframe;
prevKeyframe = curParamKeyValue._paramSet.SyncKeyframe._prevLinkedKeyframe;
nextKeyframe = curParamKeyValue._paramSet.SyncKeyframe._nextLinkedKeyframe;
//1. 프레임이 같다. => 100%
if (curFrame == curKeyframe._frameIndex ||
((curKeyframe._isLoopAsStart || curKeyframe._isLoopAsEnd) && curFrame == curKeyframe._loopFrameIndex))
{
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//추가 12.5 : AnimKeyPos : 동일 프레임
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.ExactKey;
}
//else if(curFrame >= curKeyframe._activeFrameIndexMin &&
// curFrame < curKeyframe._frameIndex)
else if (curKeyframe.IsFrameIn(curFrame, apAnimKeyframe.LINKED_KEY.Prev))
{
//범위 안에 들었다. [Prev - Cur]
if (prevKeyframe != null)
{
tmpCurFrameInt = curFrame;
if (tmpCurFrameInt > curKeyframe._frameIndex)
{
tmpCurFrameInt -= lengthFrames;
}
tmpCurFrameFloat = curFrameFloat;
if (tmpCurFrameFloat > curKeyframe._frameIndex)
{
tmpCurFrameFloat -= lengthFrames;
}
//[중요] 재생 프레임 -> 보간 가중치 계산 코드
//_cal_itp = curKeyframe._curveKey.GetItp_Int(tmpCurFrameInt, true);//기존 : Int
_cal_itp = curKeyframe._curveKey.GetItp_Float(tmpCurFrameFloat, true, tmpCurFrameInt); //변경 : Float
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = _cal_itp;
_totalWeight += _cal_itp;
//추가 : Rotation Bias
//Prev와 연결되었다면 Prev 설정을 적용한다.
if (curKeyframe._prevRotationBiasMode != apAnimKeyframe.ROTATION_BIAS.None)
{
curParamKeyValue.SetAnimRotationBias(curKeyframe._prevRotationBiasMode, curKeyframe._prevRotationBiasCount);
}
//Debug.Log("[" + i + "] [Prev ~ Cur] " + itp);
//Debug.Log("Prev ~ Next : " + itp);
//추가 12.5 : AnimKeyPos - Next 프레임으로서 Prev 프레임과 보간이 된다.
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.NextKey;
}
else
{
//연결된게 없다면 이게 100% 가중치를 갖는다.
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//Debug.Log("[" + i + "] [Prev ?? ~ Cur] 1.0");
//추가 12.5 : AnimKeyPos - 동일 프레임
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.ExactKey;
}
}
//else if(curFrame > curKeyframe._frameIndex &&
// curFrame <= curKeyframe._activeFrameIndexMax)
else if (curKeyframe.IsFrameIn(curFrame, apAnimKeyframe.LINKED_KEY.Next))
{
//범위안에 들었다 [Cur - Next]
if (nextKeyframe != null)
{
tmpCurFrameInt = curFrame;
if (tmpCurFrameInt < curKeyframe._frameIndex)
{
tmpCurFrameInt += lengthFrames;
}
tmpCurFrameFloat = curFrameFloat;
if (tmpCurFrameFloat < curKeyframe._frameIndex)
{
tmpCurFrameFloat += lengthFrames;
}
//[중요] 재생 프레임 -> 보간 가중치 계산 코드
//_cal_itp = curKeyframe._curveKey.GetItp_Int(tmpCurFrameInt, false);//기존
_cal_itp = curKeyframe._curveKey.GetItp_Float(tmpCurFrameFloat, false, tmpCurFrameInt); //변경 : Float
//itp = 1.0f - itp;//결과가 B에 맞추어지므로 여기서는 Reverse
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = _cal_itp;
_totalWeight += _cal_itp;
//Debug.Log("[" + i + "] [Cur ~ Next] " + itp);
//추가 : Rotation Bias
//Next와 연결되었다면 Next 설정을 적용한다.
if (curKeyframe._nextRotationBiasMode != apAnimKeyframe.ROTATION_BIAS.None)
{
curParamKeyValue.SetAnimRotationBias(curKeyframe._nextRotationBiasMode, curKeyframe._nextRotationBiasCount);
}
//추가 12.5 : AnimKeyPos - Prev 프레임으로서 Next 프레임과 보간이 된다.
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.PrevKey;
}
else
{
//연결된게 없다면 이게 100% 가중치를 갖는다.
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//Debug.Log("[" + i + "] [Cur ~ Next ??] 1.0");
//추가 12.5 : AnimKeyPos - 동일 프레임
curParamKeyValue._animKeyPos = apOptCalculatedResultParam.AnimKeyPos.ExactKey;
}
}
}
if (_totalWeight > 0.0f)
{
//Debug.Log("Result --------------------------------");
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
curParamKeyValue = _subParamKeyValues[i];
if (curParamKeyValue._isCalculated)
{
curParamKeyValue._weight /= _totalWeight;
//Debug.Log("[" + curParamKeyValue._weight + "]");
}
else
{
curParamKeyValue._weight = 0.0f;
}
}
//Debug.Log("-------------------------------------");
}
}
private void CalculateWeight_ControlParam_2D()
{
if (_keyParamSetGroup == null || _keyParamSetGroup._keyControlParam == null)
{
Debug.LogError("Key ParamSet Group is Null / Key Control Param Is null");
return;
}
_tmp_controlParam = _keyParamSetGroup._keyControlParam;
//1. Param의 Weight를 모두 0으로 세팅 (+ 연산으로 Weight를 추가하는 방식)
//2. 어느 RectArea에 있는지 결정한다.
//3. Rect 안에서 itp를 계산한다.
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
_tmp_paramKeyValue._weight = 0.0f;
_tmp_paramKeyValue._isCalculated = false; //<<나중에 이것도 true로 올리자
}
Vector2 curValue = _tmp_controlParam._vec2_Cur;
if (_cpLerpAreaLastSelected == null || !_cpLerpAreaLastSelected.IsInclude(curValue))
{
_cpLerpAreaLastSelected = null;
for (int i = 0; i < _cpLerpAreas.Count; i++)
{
if (_cpLerpAreas[i].IsInclude(curValue))
{
_cpLerpAreaLastSelected = _cpLerpAreas[i];
break;
}
}
//_cpLerpAreaLastSelected = _cpLerpAreas.Find(delegate (apOptCalculatedLerpArea a)
//{
// return a.IsInclude(curValue);
//});
}
if (_cpLerpAreaLastSelected == null)
{
Debug.LogError("No Lerp Area");
return; //처리가 안되는데요;
}
_cpLerpAreaLastSelected.ReadyToCalculate();
float itpX = 0.0f;
float itpY = 0.0f;
float rectPosX_Min = _cpLerpAreaLastSelected._posLT.x;
float rectPosX_Max = _cpLerpAreaLastSelected._posRB.x;
float rectPosY_Min = _cpLerpAreaLastSelected._posLT.y;
float rectPosY_Max = _cpLerpAreaLastSelected._posRB.y;
itpX = 1.0f - Mathf.Clamp01((curValue.x - rectPosX_Min) / (rectPosX_Max - rectPosX_Min));
itpY = 1.0f - Mathf.Clamp01((curValue.y - rectPosY_Min) / (rectPosY_Max - rectPosY_Min));
_cpLerpAreaLastSelected._pointLT._calculatedWeight = itpX * itpY;
_cpLerpAreaLastSelected._pointRT._calculatedWeight = (1.0f - itpX) * itpY;
_cpLerpAreaLastSelected._pointLB._calculatedWeight = itpX * (1.0f - itpY);
_cpLerpAreaLastSelected._pointRB._calculatedWeight = (1.0f - itpX) * (1.0f - itpY);
_cpLerpAreaLastSelected._pointLT.CalculateITPWeight();
_cpLerpAreaLastSelected._pointRT.CalculateITPWeight();
_cpLerpAreaLastSelected._pointLB.CalculateITPWeight();
_cpLerpAreaLastSelected._pointRB.CalculateITPWeight();
_totalWeight = 0.0f;
// 여러개의 키값을 사용할 거라면
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
if (!_tmp_paramKeyValue._isCalculated)
{
_tmp_paramKeyValue._weight = 0.0f;
continue;
}
//변경
//Weight 시작값이 기본 1이 아니라, 거리에 따른 가중치로 바뀐다.
_totalWeight += _tmp_paramKeyValue._weight;
}
if (_totalWeight > 0.0f)
{
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
if (_tmp_paramKeyValue._isCalculated)
{
_tmp_paramKeyValue._weight /= _totalWeight;
}
}
}
}
private void CalculateWeight_ControlParam_1D()
{
if (_keyParamSetGroup == null || _keyParamSetGroup._keyControlParam == null)
{
Debug.LogError("Key ParamSet Group is Null / Key Control Param Is null");
return;
}
_tmp_controlParam = _keyParamSetGroup._keyControlParam;
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
_tmp_paramKeyValue._weight = 0.0f;
_tmp_paramKeyValue._isCalculated = false; //<<나중에 이것도 true로 올리자
}
if (_cpLerpPoints.Count == 0)
{
return; //처리 불가;
}
if (_cpLerpPoints.Count == 1)
{
_cpLerpPoints[0]._calculatedWeight = 1.0f;
_cpLerpPoints[0].CalculateITPWeight();
}
else
{
//1) ITP를 계산할 두개의 Point (A, B)를 잡는다.
//2) 두개의 포인트를 기준으로 ITP를 계산한다.
//3) Total Weight 계산 후 적용
bool isRefreshLerpPointRange = false;
if (_cpLerpPoint_A == null || _cpLerpPoint_B == null)
{
isRefreshLerpPointRange = true;
}
else
{
if (_tmp_controlParam._valueType == apControlParam.TYPE.Int)
{
if (_tmp_controlParam._int_Cur < _cpLerpPoint_A._iPos ||
_tmp_controlParam._int_Cur > _cpLerpPoint_B._iPos)
{
isRefreshLerpPointRange = true;
}
}
else
{
if (_tmp_controlParam._float_Cur < _cpLerpPoint_A._pos.x ||
_tmp_controlParam._float_Cur > _cpLerpPoint_B._pos.x)
{
isRefreshLerpPointRange = true;
}
}
}
if (isRefreshLerpPointRange)
{
//0..1..2.. [value]..3...4
int iB = -1;
if (_tmp_controlParam._valueType == apControlParam.TYPE.Int)
{
for (int i = 0; i < _cpLerpPoints.Count; i++)
{
if (_tmp_controlParam._int_Cur <= _cpLerpPoints[i]._iPos)
{
iB = i;
break;
}
}
}
else
{
for (int i = 0; i < _cpLerpPoints.Count; i++)
{
if (_tmp_controlParam._float_Cur <= _cpLerpPoints[i]._pos.x)
{
iB = i;
break;
}
}
}
if (iB < 0)
{
iB = _cpLerpPoints.Count - 1;
}
_cpLerpPoint_B = _cpLerpPoints[iB];
if (iB == 0)
{
_cpLerpPoint_A = _cpLerpPoints[0];
}
else
{
_cpLerpPoint_A = _cpLerpPoints[iB - 1];
}
}
if (_cpLerpPoint_A == null || _cpLerpPoint_B == null)
{
return;
}
if (_cpLerpPoint_A == _cpLerpPoint_B)
{
_cpLerpPoint_A._calculatedWeight = 1.0f;
_cpLerpPoint_A.CalculateITPWeight();
}
else
{
float itp = 0.0f;
if (_tmp_controlParam._valueType == apControlParam.TYPE.Int)
{
itp = 1.0f - Mathf.Clamp01((float)(_tmp_controlParam._int_Cur - _cpLerpPoint_A._iPos) / (float)(_cpLerpPoint_B._iPos - _cpLerpPoint_A._iPos));
}
else
{
itp = 1.0f - Mathf.Clamp01((float)(_tmp_controlParam._float_Cur - _cpLerpPoint_A._pos.x) / (float)(_cpLerpPoint_B._pos.x - _cpLerpPoint_A._pos.x));
}
_cpLerpPoint_A._calculatedWeight = itp;
_cpLerpPoint_B._calculatedWeight = 1.0f - itp;
_cpLerpPoint_A.CalculateITPWeight();
_cpLerpPoint_B.CalculateITPWeight();
}
_totalWeight = 0.0f;
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
if (!_tmp_paramKeyValue._isCalculated)
{
_tmp_paramKeyValue._weight = 0.0f;
continue;
}
_totalWeight += _tmp_paramKeyValue._weight;
}
if (_totalWeight > 0.0f)
{
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
_tmp_paramKeyValue = _subParamKeyValues[i];
if (_tmp_paramKeyValue._isCalculated)
{
_tmp_paramKeyValue._weight /= _totalWeight;
}
}
}
}
}
private void CalculateWeight_ControlParam()
{
if (_keyParamSetGroup._keyControlParam == null)
{
Debug.LogError("Null Key Control Param");
return;
}
//Debug.Log("Update Control Param : " + _keyParamSetGroup._keyControlParam._keyName);
_cal_controlParam = _keyParamSetGroup._keyControlParam;
//_cal_minDist = float.MaxValue;
//_cal_maxDist = 0.0f;
_cal_dist = 0.0f;
_cal_curParamKeyValue = null;
_totalWeight = 0.0f;
//Debug.Log(_cal_controlParam._keyName + " : " + _cal_controlParam._vec2_Cur);
for (int i = 0; i < _nSubParamKeyValues; i++)
{
_cal_curParamKeyValue = _subParamKeyValues[i];
_cal_dist = -10.0f;
_cal_curParamKeyValue._isCalculated = false;
switch (_cal_controlParam._valueType)
{
//case apControlParam.TYPE.Bool:
// if(_cal_curParamKeyValue._paramSet._conSyncValue_Bool == _cal_controlParam._bool_Cur)
// {
// _cal_curParamKeyValue._dist = 0.0f;
// _cal_curParamKeyValue._isCalculated = true;
// }
// else
// {
// _cal_curParamKeyValue._dist = -10.0f;
// _cal_curParamKeyValue._isCalculated = false;
// }
// break;
case apControlParam.TYPE.Int:
_cal_dist = _cal_controlParam.GetNormalizedDistance_Int(_cal_curParamKeyValue._paramSet._conSyncValue_Int);
break;
case apControlParam.TYPE.Float:
_cal_dist = _cal_controlParam.GetNormalizedDistance_Float(_cal_curParamKeyValue._paramSet._conSyncValue_Float);
break;
case apControlParam.TYPE.Vector2:
_cal_dist = _cal_controlParam.GetNormalizedDistance_Vector2(_cal_curParamKeyValue._paramSet._conSyncValue_Vector2);
break;
//case apControlParam.TYPE.Vector3:
// _cal_dist = _cal_controlParam.GetNormalizedDistance_Vector3(_cal_curParamKeyValue._paramSet._conSyncValue_Vector3);
// break;
}
if (_cal_dist < -1.0f)
{
_cal_curParamKeyValue._dist = -10.0f;
_cal_curParamKeyValue._isCalculated = false;
_cal_curParamKeyValue._weight = 0.0f;
continue;
}
//주의 : Runtime에서는 Matched가 없다.
_cal_curParamKeyValue._dist = _cal_dist;
_cal_curParamKeyValue._isCalculated = true;
_cal_curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
}
//-----------------------------------------------
// Weight 계산
//선형 IDW 방식으로 계산한다.
#region [미사용 코드] 역선형 보간 방식은 오류가 있다;
//for (int i = 0; i < _nSubParamKeyvalues; i++)
//{
// _cal_curParamKeyValue = _subParamKeyValues[i];
// if(!_cal_curParamKeyValue._isCalculated)
// {
// _cal_curParamKeyValue._weight = 0.0f;
// continue;
// }
// _cal_keepWeightRatio = Mathf.Clamp01((_cal_curParamKeyValue._dist - _cal_minDist) / (_cal_maxDist - _cal_minDist));
// _cal_mulWeight = (_cal_minDist * _cal_keepWeightRatio) + (1.0f - _cal_keepWeightRatio);
// //_cal_revWeight = (_cal_maxDist - _cal_curParamKeyValue._dist) * _cal_mulWeight;
// _cal_revWeight = (2.0f - _cal_curParamKeyValue._dist) * _cal_mulWeight;
// //_cal_revWeight = (1.0f / (_cal_curParamKeyValue._dist)) * _cal_mulWeight;
// _totalWeight += _cal_revWeight;
// _cal_curParamKeyValue._weight = _cal_revWeight;
//}
#endregion
if (_nSubParamKeyValues >= 2)
{
_totalWeight = 0.0f;
for (int i = 0; i < _nSubParamKeyValues; i++)
{
_cal_curParamKeyValue = _subParamKeyValues[i];
if (!_cal_curParamKeyValue._isCalculated || _cal_curParamKeyValue._weight < _zeroBias)
{
continue;
}
//다른 SubParam과의 Dist를 비교하여 내분 Weight를 하자
if (i + 1 < _nSubParamKeyValues)
{
for (int j = i + 1; j < _nSubParamKeyValues; j++)
{
_cal_nextParamKeyValue = _subParamKeyValues[j];
if (!_cal_nextParamKeyValue._isCalculated)
{
continue;
}
_cal_sumDist = _cal_curParamKeyValue._dist + _cal_nextParamKeyValue._dist;
if (_cal_sumDist > _zeroBias)
{
_cal_itp = Mathf.Clamp01((_cal_sumDist - _cal_curParamKeyValue._dist) / _cal_sumDist);
_cal_curParamKeyValue._weight *= _cal_itp;
_cal_nextParamKeyValue._weight *= (1.0f - _cal_itp);
}
}
}
_totalWeight += _cal_curParamKeyValue._weight;
}
}
if (_totalWeight > 0.0f)
{
for (int i = 0; i < _nSubParamKeyValues; i++)
{
_cal_curParamKeyValue = _subParamKeyValues[i];
if (_cal_curParamKeyValue._isCalculated)
{
_cal_curParamKeyValue._weight /= _totalWeight;
}
}
}
}
// Functions
//-----------------------------------------
public void AddPoint(apOptCalculatedResultParam.OptParamKeyValueSet point, float weight)
{
_refParams.Add(point);
_refWeights.Add(weight);
}
//---------------------------------------------------
// 계산함수 - KeyFrame
//---------------------------------------------------
private void CalculateWeight_KeyFrame()
{
if (_keyParamSetGroup == null || _keyParamSetGroup._keyAnimTimelineLayer == null)
{
return;
}
apAnimTimelineLayer timlineLayer = _keyParamSetGroup._keyAnimTimelineLayer;
apOptCalculatedResultParam.OptParamKeyValueSet curParamKeyValue = null;
int curFrame = timlineLayer._parentAnimClip.CurFrame;
bool isLoop = timlineLayer._parentAnimClip.IsLoop;
apAnimKeyframe firstKeyframe = timlineLayer._firstKeyFrame;
apAnimKeyframe lastKeyframe = timlineLayer._lastKeyFrame;
//int firstFrame = -1;
//int lastFrame = -1;
//if(isLoop)
//{
// if(firstKeyframe != null)
// {
// firstFrame = firstKeyframe._frameIndex;
// }
// if(lastKeyframe != null)
// {
// lastFrame = lastKeyframe._frameIndex;
// }
//}
_totalWeight = 0.0f;
apAnimKeyframe curKeyframe = null;
apAnimKeyframe prevKeyframe = null;
apAnimKeyframe nextKeyframe = null;
//int indexOffsetA = 0;
//int indexOffsetB = 0;
int lengthFrames = timlineLayer._parentAnimClip.EndFrame - timlineLayer._parentAnimClip.StartFrame;
int tmpCurFrame = 0;
//Debug.Log("Calculated--------------------------------");
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
curParamKeyValue = _subParamKeyValues[i];
curParamKeyValue._dist = -10.0f;
curParamKeyValue._isCalculated = false;
//유효하지 않은 키프레임이면 처리하지 않는다.
if (curParamKeyValue._paramSet.SyncKeyframe == null ||
!curParamKeyValue._paramSet.SyncKeyframe._isActive)
{
//Debug.Log("[" + i + "] Not Active or Null Keyframe");
continue;
}
curKeyframe = curParamKeyValue._paramSet.SyncKeyframe;
prevKeyframe = curParamKeyValue._paramSet.SyncKeyframe._prevLinkedKeyframe;
nextKeyframe = curParamKeyValue._paramSet.SyncKeyframe._nextLinkedKeyframe;
//1. 프레임이 같다. => 100%
if (curFrame == curKeyframe._frameIndex ||
((curKeyframe._isLoopAsStart || curKeyframe._isLoopAsEnd) && curFrame == curKeyframe._loopFrameIndex))
{
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//Debug.Log("[" + i + "] <Exact Frame>");
}
//else if(curFrame >= curKeyframe._activeFrameIndexMin &&
// curFrame < curKeyframe._frameIndex)
else if (curKeyframe.IsFrameIn(curFrame, true))
{
//범위 안에 들었다. [Prev - Cur]
if (prevKeyframe != null)
{
//indexOffsetA = 0;
//indexOffsetB = 0;
//if(prevKeyframe._frameIndex > curKeyframe._frameIndex)
//{
// //Loop인 경우 Prev가 더 클 수 있다.
// indexOffsetA = -lengthFrames;
//}
tmpCurFrame = curFrame;
if (tmpCurFrame > curKeyframe._frameIndex)
{
tmpCurFrame -= lengthFrames;
}
//float itp = apAnimCurve.GetCurvedRelativeInterpolation(prevKeyframe._curveKey, curKeyframe._curveKey, curFrame, curKeyframe._curveKey._isPrevKeyUseDummyIndex, false);
//이전 코드
//_cal_itp = apAnimCurve.GetCurvedRelativeInterpolation(curKeyframe._curveKey, prevKeyframe._curveKey, tmpCurFrame, true);
//>> 다음 코드
_cal_itp = curKeyframe._curveKey.GetItp_Int(tmpCurFrame, true);
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = _cal_itp;
_totalWeight += _cal_itp;
//Debug.Log("[" + i + "] [Prev ~ Cur] " + itp);
//Debug.Log("Prev ~ Next : " + itp);
}
else
{
//연결된게 없다면 이게 100% 가중치를 갖는다.
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//Debug.Log("[" + i + "] [Prev ?? ~ Cur] 1.0");
}
}
//else if(curFrame > curKeyframe._frameIndex &&
// curFrame <= curKeyframe._activeFrameIndexMax)
else if (curKeyframe.IsFrameIn(curFrame, false))
{
//범위안에 들었다 [Cur - Next]
if (nextKeyframe != null)
{
//indexOffsetA = 0;
//indexOffsetB = 0;
//if(nextKeyframe._frameIndex < curKeyframe._frameIndex)
//{
// //Loop인 경우 Next가 더 작을 수 있다.
// indexOffsetB = lengthFrames;
//}
tmpCurFrame = curFrame;
if (tmpCurFrame < curKeyframe._frameIndex)
{
tmpCurFrame += lengthFrames;
}
//float itp = apAnimCurve.GetCurvedRelativeInterpolation(curKeyframe._curveKey, nextKeyframe._curveKey, curFrame, false, curKeyframe._curveKey._isNextKeyUseDummyIndex);
//이전 코드
//_cal_itp = apAnimCurve.GetCurvedRelativeInterpolation(curKeyframe._curveKey, nextKeyframe._curveKey, tmpCurFrame, false);
//>> 다음 코드
_cal_itp = curKeyframe._curveKey.GetItp_Int(tmpCurFrame, false);
//itp = 1.0f - itp;//결과가 B에 맞추어지므로 여기서는 Reverse
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = _cal_itp;
_totalWeight += _cal_itp;
//Debug.Log("[" + i + "] [Cur ~ Next] " + itp);
}
else
{
//연결된게 없다면 이게 100% 가중치를 갖는다.
curParamKeyValue._dist = 0.0f;
curParamKeyValue._isCalculated = true;
curParamKeyValue._weight = 1.0f;
_totalWeight += 1.0f;
//Debug.Log("[" + i + "] [Cur ~ Next ??] 1.0");
}
}
}
if (_totalWeight > 0.0f)
{
//Debug.Log("Result --------------------------------");
for (int i = 0; i < _subParamKeyValues.Count; i++)
{
curParamKeyValue = _subParamKeyValues[i];
if (curParamKeyValue._isCalculated)
{
curParamKeyValue._weight /= _totalWeight;
//Debug.Log("[" + curParamKeyValue._weight + "]");
}
else
{
curParamKeyValue._weight = 0.0f;
}
}
//Debug.Log("-------------------------------------");
}
}
