internal ModbusSensorAttribute(ModbusSensorAttribute Other)
{
this.m_device = Other.m_device;
this.Value = Other.Value;
this.Annotations = Other.Annotations;
this.Access = Other.Access;
this.COVBehavior = Other.COVBehavior;
}
internal uint Initialize()
{
// Sensor property.
ModbusSensorProperty sensorProperty = new ModbusSensorProperty(this, "T/H/CO2 Sensor", "");
// Current Temperature Reading attribute.
ModbusSensorAttribute tempAttr = new ModbusSensorAttribute(
this,
"Temperature",
Windows.Foundation.PropertyValue.CreateDouble(0),
E_ACCESS_TYPE.ACCESS_READ
);
tempAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(tempAttr);
// Temperature Adjustment attribute.
ModbusSensorAttribute tempAdjAttr = new ModbusSensorAttribute(
this,
"Temperature Adjustment",
Windows.Foundation.PropertyValue.CreateDouble(0),
E_ACCESS_TYPE.ACCESS_READ
);
tempAdjAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(tempAdjAttr);
//Set Temperature Adjustment method.
ModbusSensorMethod tempAdjCommand = new ModbusSensorMethod(
this,
"setTempAdj",
"Sets the value of Temperature Adjustment to adjust the temperature reading. The input value must be between -20.0 to +20.0.",
"Temperature Adjustment",
0);
var tempAdjParam = new AdapterValue("value", Windows.Foundation.PropertyValue.CreateDouble(0));
tempAdjCommand.InputParams.Add(tempAdjParam);
this.Methods.Add(tempAdjCommand);
// Currernt Humidity Reading attribute.
ModbusSensorAttribute humidAttr = new ModbusSensorAttribute(
this,
"Humidity",
Windows.Foundation.PropertyValue.CreateDouble(0),
E_ACCESS_TYPE.ACCESS_READ
);
humidAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(humidAttr);
// Humidity Adjustment attribute.
ModbusSensorAttribute humidAdjAttr = new ModbusSensorAttribute(
this,
"Humidity Adjustment",
Windows.Foundation.PropertyValue.CreateDouble(0),
E_ACCESS_TYPE.ACCESS_READ
);
humidAdjAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(humidAdjAttr);
//Set Humidity Adjustment method.
ModbusSensorMethod humidAdjCommand = new ModbusSensorMethod(
this,
"setHumidAdj",
"Sets the value of Humidity Adjustment to adjust the humidity reading. The input value must be between -20.0 to +20.0.",
"Humidity Adjustment",
0);
var humidAdjParam = new AdapterValue("value", Windows.Foundation.PropertyValue.CreateDouble(0));
humidAdjCommand.InputParams.Add(humidAdjParam);
this.Methods.Add(humidAdjCommand);
// Temperature/Humidity Reading Interval attribute.
ModbusSensorAttribute THIntervalAttr = new ModbusSensorAttribute(
this,
"T/H Reading Interval",
Windows.Foundation.PropertyValue.CreateUInt16(1),
E_ACCESS_TYPE.ACCESS_READ
);
THIntervalAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(THIntervalAttr);
//Set Temperature/Humidity Reading Interval method.
ModbusSensorMethod THIntervalCommand = new ModbusSensorMethod(
this,
"setTHInterval",
"Sets the value of temperature and humidity reading interval. The input value must be between 1 to 10.",
"T/H Reading Interval",
0);
var THIntervalParam = new AdapterValue("value", Windows.Foundation.PropertyValue.CreateUInt16(1));
THIntervalCommand.InputParams.Add(THIntervalParam);
this.Methods.Add(THIntervalCommand);
// Current CO2 Concentration attribute.
ModbusSensorAttribute CO2Attr = new ModbusSensorAttribute(
this,
"CO2 Concentration",
Windows.Foundation.PropertyValue.CreateUInt16(0),
E_ACCESS_TYPE.ACCESS_READ
);
CO2Attr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(CO2Attr);
// CO2 Adjustment attribute.
ModbusSensorAttribute CO2AdjAttr = new ModbusSensorAttribute(
this,
"CO2 Adjustment",
Windows.Foundation.PropertyValue.CreateInt16(0),
E_ACCESS_TYPE.ACCESS_READ
);
CO2AdjAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(CO2AdjAttr);
//Set CO2 Concentration Adjustment method.
ModbusSensorMethod CO2AdjCommand = new ModbusSensorMethod(
this,
"setCO2Adj",
"Sets the value of CO2 concentration Adjustment to adjust the CO2 concentration reading. The input value must be between -1500 to +1500",
"CO2 Adjustment",
0);
var CO2AdjParam = new AdapterValue("value", Windows.Foundation.PropertyValue.CreateInt16(0));
CO2AdjCommand.InputParams.Add(CO2AdjParam);
this.Methods.Add(CO2AdjCommand);
// CO2 Reading Interval attribute.
ModbusSensorAttribute CO2IntervalAttr = new ModbusSensorAttribute(
this,
"CO2 Reading Interval",
Windows.Foundation.PropertyValue.CreateUInt16(1),
E_ACCESS_TYPE.ACCESS_READ
);
CO2IntervalAttr.COVBehavior = SignalBehavior.Always;
sensorProperty.Attributes.Add(CO2IntervalAttr);
//Set CO2 Reading Interval method.
ModbusSensorMethod CO2IntervalCommand = new ModbusSensorMethod(
this,
"setCO2Interval",
"Sets the value of temperature and humidity reading interval. The input value must be between 1 to 10.",
"CO2 Reading Interval",
0);
var CO2IntervalParam = new AdapterValue("value", Windows.Foundation.PropertyValue.CreateUInt16(1));
CO2IntervalCommand.InputParams.Add(CO2IntervalParam);
this.Methods.Add(CO2IntervalCommand);
// Create Change of Value Signal for the Temperature Attribute
AdapterSignal covSignal = new AdapterSignal(Constants.CHANGE_OF_VALUE_SIGNAL);
AdapterValue propertyHandle = new AdapterValue(Constants.COV__PROPERTY_HANDLE, sensorProperty);
AdapterValue attrHandle = new AdapterValue(Constants.COV__ATTRIBUTE_HANDLE, tempAttr.Value);
covSignal.Params.Add(propertyHandle);
covSignal.Params.Add(attrHandle);
this.Signals.Add(covSignal);
this.Properties.Add(sensorProperty);
return(ERROR_SUCCESS);
}