//setRoom1 creates a new room when the player runs through the previous door
public void setRoom1( )
{
//remove critters and wall
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
setBorder(64.0f, 16.0f, 64.0f); // size of the world
//create new room 'shell'
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
//set textures and graphics
SkyBox.setSideTexture(cRealBox3.HIZ, BitmapRes.Wall3); //Make the near HIZ transparent
SkyBox.setSideTexture(cRealBox3.LOZ, BitmapRes.Wall3); //Far wall
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Wall3); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall3); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Concrete); //ceiling
//set number of critters to be created. Adjust numbers for increasing difficulty between rooms
_seedcount = 7;
WrapFlag = cCritter.BOUNCE;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
//create a door at a new position in the room
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
//move player to new position in next room
Player.moveTo(new cVector3(0.0f, -10.0f, 32.0f));
//set collision flag and reset age of new room
wentThrough = true;
startNewRoom = Age;
}
public void setRoom3()
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 20.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Graphics3, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 20.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Midx, _border.Loy, _border.Loz),
new cVector3(_border.Midx, _border.Midy - 3, _border.Loz),
2.0f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS + 1.0f;
cCritterSlideWall pwall = new cCritterSlideWall(new cVector3(_border.Midx, ycenter - 10, _border.Midz + 10), new cVector3(_border.Hix + 50, ycenter - 10, _border.Midz + 10),
height, wallthickness, this, cCritterSlideWall.TYPE.HARMFUL, new cVector3(0.0f, -0.05f, 0.0f), false, 200);
cSpriteTextureBox pspritebox = new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wood2, 16);
pwall.Sprite = pspritebox;
seedCritters();
_ptreasure = new cCritterMedpack(this, new cVector3(_border.Midx, _border.Midy - 2.0f,
_border.Loz - 1.5f * cGame3D.TREASURERADIUS));
cCritterBossDragonKnight boss = new cCritterBossDragonKnight(this, new cVector3(_border.Midx, _border.Loy, _border.Midz - 5), new DragonBullet(1.0f));
}
public cGame3D()
{
doorcollision = false;
_menuflags &= ~cGame.MENU_BOUNCEWRAP;
_menuflags |= cGame.MENU_HOPPER; //Turn on hopper listener option.
_spritetype = cGame.ST_MESHSKIN;
setBorder(64.0f, 16.0f, 64.0f); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
/* In this world the coordinates are screwed up to match the screwed up
* listener that I use. I should fix the listener and the coords.
* Meanwhile...
* I am flying into the screen from HIZ towards LOZ, and
* LOX below and HIX above and
* LOY on the right and HIY on the left. */
SkyBox.setSideTexture(cRealBox3.HIZ, BitmapRes.Wall3); //Make the near HIZ transparent
SkyBox.setSideTexture(cRealBox3.LOZ, BitmapRes.Wall3); //Far wall
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Wall3); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall3); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Concrete); //ceiling
WrapFlag = cCritter.BOUNCE;
_seedcount = 7;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
}
public cGame3D()
{
doorcollision = false;
_menuflags &= ~cGame.MENU_BOUNCEWRAP;
_menuflags |= cGame.MENU_HOPPER; //Turn on hopper listener option.
_spritetype = cGame.ST_MESHSKIN;
setBorder(64.0f, 16.0f, 64.0f); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
/* In this world the coordinates are screwed up to match the screwed up
* listener that I use. I should fix the listener and the coords.
* Meanwhile...
* I am flying into the screen from HIZ towards LOZ, and
* LOX below and HIX above and
* LOY on the right and HIY on the left. */
SkyBox.setSideSolidColor(cRealBox3.HIZ, Color.Aqua); //Make the near HIZ transparent
SkyBox.setSideSolidColor(cRealBox3.LOZ, Color.Aqua); //Far wall
SkyBox.setSideSolidColor(cRealBox3.LOX, Color.DarkOrchid); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall2, 2); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Graphics3); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Sky); //ceiling
WrapFlag = cCritter.BOUNCE;
_seedcount = 7;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
shape = new cCritterShape(this);
shape.Sprite = new cSphere(3, Color.DarkBlue);
shape.moveTo(new cVector3(Border.Midx, Border.Hiy, Border.Midz));
/* In this world the x and y go left and up respectively, while z comes out of the screen.
* A wall views its "thickness" as in the y direction, which is up here, and its
* "height" as in the z direction, which is into the screen. */
//First draw a wall with dy height resting on the bottom of the world.
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx + 2.0f, ycenter, zpos),
new cVector3(_border.Hix, ycenter, zpos),
height, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
/* We'll tile our sprites three times along the long sides, and on the
* short ends, we'll only tile them once, so we reset these two. */
pwall.Sprite = pspritebox;
//Then draw a ramp to the top of the wall. Scoot it over against the right wall.
float planckwidth = 0.75f * height;
pwall = new cCritterWall(
new cVector3(_border.Hix - planckwidth / 2.0f, _border.Loy, _border.Hiz - 2.0f),
new cVector3(_border.Hix - planckwidth / 2.0f, _border.Loy + height, zpos),
planckwidth, //thickness param for wall's dy which is perpenedicualr to the baseline,
//which goes into the screen, so thickness goes to the right
wallthickness, //_border.zradius(), //height argument for wall's dz which goes into the screen
this);
cSpriteTextureBox stb = new cSpriteTextureBox(pwall.Skeleton,
BitmapRes.Wood2, 2);
pwall.Sprite = stb;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
}
public void setRoom2()
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 40.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Graphics1, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 40.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
//add door
cCritterDoor pdwall = new cCritterDoor(new cVector3(_border.Midx, _border.Loy + 4, _border.Loz), new cVector3(_border.Midx, _border.Loy + 10, _border.Loz), 2.0f, 3.0f, this);
cSpriteTextureBox pspritedoor = new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
float wallThickness = 5.0f, wallHeight = 10.0f;
//starting block
cVector3 enda = new cVector3(Border.Midx, Border.Loy + 1, Border.Hiz);
cVector3 endb = new cVector3(Border.Midx, Border.Loy + 1, Border.Hiz - 5);
cCritterWall startingBlock = new cCritterWall(enda, endb, wallThickness, wallHeight, this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(startingBlock.Skeleton, BitmapRes.Wood2, 16); //Sets all sides
startingBlock.Sprite = pspritebox;
//ending block
cVector3 enda2 = new cVector3(Border.Midx, Border.Loy + 1, Border.Loz + 7);
cVector3 endb2 = new cVector3(Border.Midx, Border.Loy + 1, Border.Loz);
cCritterWall endBlock = new cCritterWall(enda2, endb2, wallThickness, 8.0f, this);
cSpriteTextureBox pspritebox2 =
new cSpriteTextureBox(endBlock.Skeleton, BitmapRes.Wood2, 16); //Sets all sides
endBlock.Sprite = pspritebox2;
//floor
cVector3 enda3 = new cVector3(Border.Midx, Border.Loy, Border.Loz);
cVector3 endb3 = new cVector3(Border.Midx, Border.Loy, Border.Hiz);
DamagingWall floor = new DamagingWall(enda3, endb3, 0.5f, 0.5f, this);
//med pack
_ptreasure = new cCritterMedpack(this, new cVector3(Border.Midx, Border.Loy + 7, Border.Hiz - 4));
//sliding walls (spawned based on pos of starting block)
cVector3 leftEnd = new cVector3();
leftEnd.addassign(startingBlock.Position.add(new cVector3(0, 4.0f, -0.5f)));
cVector3 rightEnd = new cVector3();
rightEnd.copy(leftEnd);
rightEnd.addassign(new cVector3(0, 0, -5.0f));
float thickness = 0.1f, height = 0.3f;
cVector3 moveAxisandDirection = new cVector3(0, 0, -0.005f);
cVector3 startPos = new cVector3();
startPos.copy(rightEnd);
cVector3 endPos = new cVector3();
endPos.copy(startPos);
endPos.Z = Border.Loz + 9.5f;
//spawn sliding walls in a separate thread
new Thread(() =>
spawnWall(leftEnd, rightEnd, thickness, height, this, cCritterSlideWall.TYPE.PLATFORM, moveAxisandDirection, false, startPos, endPos)).Start();
seedCritters();
Player.moveTo(startingBlock.Position.add(new cVector3(0, 10.0f, 0)));
new cCritterBossDrFreak(this, endBlock.Position.add(new cVector3(0, 10.0f, 0)), new KnockbackBullet(), 5);
}
public void setRoom1( )
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 20.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Sky, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 20.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
_ptreasure = new cCritterMedpack(this, new cVector3(_border.Midx, _border.Loy + 2.0f,
_border.Midz + 2.0f * cGame3D.TREASURERADIUS));
float rampRaise = 0.5f;
float height = 1.0f;
float width = 10.0f;
// add ramp
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx, _border.Loy - rampRaise, _border.Hiz - 3.0f),
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Hiz - 5.0f),
width, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
height, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Metal, 16); //Sets all sides
pwall.Sprite = pspritebox;
// add boss platform
pwall = new cCritterWall(
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Hiz - 5.0f),
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz),
width, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
height, //height argument for this wall's dz goes into the screen
this);
pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Metal, 16); //Sets all sides
pwall.Sprite = pspritebox;
// add door
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz),
new cVector3(_border.Midx, _border.Midy - 3 + rampRaise, _border.Loz),
2.0f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
seedCritters();
new cCritterBossMog(this, new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz), new PulseBullet());
}