public void FillEnvelope(com.epl.geometry.Envelope2D envIn)
{
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D(0, 0, width_, height_);
if (!env.Intersect(envIn))
{
return;
}
int x0 = (int)env.xmin;
int x = (int)env.xmax;
int xn = com.epl.geometry.NumberUtils.Snap(x0, 0, width_);
int xm = com.epl.geometry.NumberUtils.Snap(x, 0, width_);
if (x0 < width_ && xn < xm)
{
int y0 = (int)env.ymin;
int y1 = (int)env.ymax;
y0 = com.epl.geometry.NumberUtils.Snap(y0, 0, height_);
y1 = com.epl.geometry.NumberUtils.Snap(y1, 0, height_);
if (y0 < height_)
{
for (int y = y0; y < y1; y++)
{
scanBuffer_[scanPtr_++] = xn;
scanBuffer_[scanPtr_++] = xm;
scanBuffer_[scanPtr_++] = y;
if (scanPtr_ == scanBuffer_.Length)
{
callback_.DrawScan(scanBuffer_, scanPtr_);
scanPtr_ = 0;
}
}
}
}
}
internal virtual com.epl.geometry.GeometryCursor IntersectEx(com.epl.geometry.Geometry input_geom)
{
System.Diagnostics.Debug.Assert((m_dimensionMask != -1));
com.epl.geometry.Geometry dst_geom = TryNativeImplementation_(input_geom);
if (dst_geom != null)
{
com.epl.geometry.Geometry[] res_vec = new com.epl.geometry.Geometry[3];
res_vec[dst_geom.GetDimension()] = dst_geom;
return PrepareVector_(input_geom.GetDescription(), m_dimensionMask, res_vec);
}
com.epl.geometry.Envelope2D commonExtent = com.epl.geometry.InternalUtils.GetMergedExtent(m_geomIntersector, input_geom);
double t = com.epl.geometry.InternalUtils.CalculateToleranceFromGeometry(m_spatial_reference, commonExtent, true);
// Preprocess geometries to be clipped to the extent of intersection to
// get rid of extra segments.
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D();
m_geomIntersector.QueryEnvelope2D(env);
env.Inflate(2 * t, 2 * t);
com.epl.geometry.Envelope2D env1 = new com.epl.geometry.Envelope2D();
input_geom.QueryEnvelope2D(env1);
env.Intersect(env1);
System.Diagnostics.Debug.Assert((!env.IsEmpty()));
env.Inflate(100 * t, 100 * t);
double tol = 0;
com.epl.geometry.Geometry clippedIntersector = com.epl.geometry.Clipper.Clip(m_geomIntersector, env, tol, 0.0);
com.epl.geometry.Geometry clippedInputGeom = com.epl.geometry.Clipper.Clip(input_geom, env, tol, 0.0);
// perform the clip
com.epl.geometry.Geometry[] res_vec_1;
res_vec_1 = com.epl.geometry.TopologicalOperations.IntersectionEx(clippedInputGeom, clippedIntersector, m_spatial_reference, m_progress_tracker);
return PrepareVector_(input_geom.GetDescription(), m_dimensionMask, res_vec_1);
}
internal virtual com.epl.geometry.Geometry Intersect(com.epl.geometry.Geometry input_geom)
{
com.epl.geometry.Geometry dst_geom = TryNativeImplementation_(input_geom);
if (dst_geom != null)
{
return dst_geom;
}
com.epl.geometry.Envelope2D commonExtent = com.epl.geometry.InternalUtils.GetMergedExtent(m_geomIntersector, input_geom);
// return Topological_operations::intersection(input_geom,
// m_geomIntersector, m_spatial_reference, m_progress_tracker);
// Preprocess geometries to be clipped to the extent of intersection to
// get rid of extra segments.
double t = com.epl.geometry.InternalUtils.CalculateToleranceFromGeometry(m_spatial_reference, commonExtent, true);
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D();
m_geomIntersector.QueryEnvelope2D(env);
com.epl.geometry.Envelope2D env1 = new com.epl.geometry.Envelope2D();
input_geom.QueryEnvelope2D(env1);
env.Inflate(2.0 * t, 2.0 * t);
env.Intersect(env1);
System.Diagnostics.Debug.Assert((!env.IsEmpty()));
env.Inflate(100 * t, 100 * t);
double tol = 0;
com.epl.geometry.Geometry clippedIntersector = com.epl.geometry.Clipper.Clip(m_geomIntersector, env, tol, 0.0);
com.epl.geometry.Geometry clippedInputGeom = com.epl.geometry.Clipper.Clip(input_geom, env, tol, 0.0);
// perform the clip
return com.epl.geometry.TopologicalOperations.Intersection(clippedInputGeom, clippedIntersector, m_spatial_reference, m_progress_tracker);
}
/// <summary>
/// Changes this envelope to be the intersection of itself with the other
/// envelope.
/// </summary>
/// <param name="other">The envelope to intersect.</param>
/// <returns>Returns true if the result is not empty.</returns>
public virtual bool Intersect(com.epl.geometry.Envelope other)
{
_touch();
com.epl.geometry.Envelope2D e2d = new com.epl.geometry.Envelope2D();
other.QueryEnvelope2D(e2d);
return(m_envelope.Intersect(e2d));
}
internal static com.epl.geometry.Envelope2DIntersectorImpl GetEnvelope2DIntersectorForParts(com.epl.geometry.MultiPathImpl multipathImplA, com.epl.geometry.MultiPathImpl multipathImplB, double tolerance, bool bExteriorOnlyA, bool bExteriorOnlyB)
{
int type_a = multipathImplA.GetType().Value();
int type_b = multipathImplB.GetType().Value();
com.epl.geometry.Envelope2D env_a = new com.epl.geometry.Envelope2D();
com.epl.geometry.Envelope2D env_b = new com.epl.geometry.Envelope2D();
multipathImplA.QueryLooseEnvelope2D(env_a);
multipathImplB.QueryLooseEnvelope2D(env_b);
env_a.Inflate(tolerance, tolerance);
env_b.Inflate(tolerance, tolerance);
com.epl.geometry.Envelope2D envInter = new com.epl.geometry.Envelope2D();
envInter.SetCoords(env_a);
envInter.Intersect(env_b);
com.epl.geometry.Envelope2DIntersectorImpl intersector = new com.epl.geometry.Envelope2DIntersectorImpl();
intersector.SetTolerance(tolerance);
bool b_found_red = false;
intersector.StartRedConstruction();
for (int ipath_a = 0, npaths = multipathImplA.GetPathCount(); ipath_a < npaths; ipath_a++)
{
if (bExteriorOnlyA && type_a == com.epl.geometry.Geometry.GeometryType.Polygon && !multipathImplA.IsExteriorRing(ipath_a))
{
continue;
}
multipathImplA.QueryPathEnvelope2D(ipath_a, env_a);
if (!env_a.IsIntersecting(envInter))
{
continue;
}
b_found_red = true;
intersector.AddRedEnvelope(ipath_a, env_a);
}
intersector.EndRedConstruction();
if (!b_found_red)
{
return(null);
}
bool b_found_blue = false;
intersector.StartBlueConstruction();
for (int ipath_b = 0, npaths = multipathImplB.GetPathCount(); ipath_b < npaths; ipath_b++)
{
if (bExteriorOnlyB && type_b == com.epl.geometry.Geometry.GeometryType.Polygon && !multipathImplB.IsExteriorRing(ipath_b))
{
continue;
}
multipathImplB.QueryPathEnvelope2D(ipath_b, env_b);
if (!env_b.IsIntersecting(envInter))
{
continue;
}
b_found_blue = true;
intersector.AddBlueEnvelope(ipath_b, env_b);
}
intersector.EndBlueConstruction();
if (!b_found_blue)
{
return(null);
}
return(intersector);
}
internal static com.epl.geometry.Envelope2DIntersectorImpl GetEnvelope2DIntersector(com.epl.geometry.MultiPathImpl multipathImplA, com.epl.geometry.MultiPathImpl multipathImplB, double tolerance)
{
com.epl.geometry.Envelope2D env_a = new com.epl.geometry.Envelope2D();
com.epl.geometry.Envelope2D env_b = new com.epl.geometry.Envelope2D();
multipathImplA.QueryLooseEnvelope2D(env_a);
multipathImplB.QueryLooseEnvelope2D(env_b);
env_a.Inflate(tolerance, tolerance);
env_b.Inflate(tolerance, tolerance);
com.epl.geometry.Envelope2D envInter = new com.epl.geometry.Envelope2D();
envInter.SetCoords(env_a);
envInter.Intersect(env_b);
com.epl.geometry.SegmentIteratorImpl segIterA = multipathImplA.QuerySegmentIterator();
com.epl.geometry.SegmentIteratorImpl segIterB = multipathImplB.QuerySegmentIterator();
com.epl.geometry.Envelope2DIntersectorImpl intersector = new com.epl.geometry.Envelope2DIntersectorImpl();
intersector.SetTolerance(tolerance);
bool b_found_red = false;
intersector.StartRedConstruction();
while (segIterA.NextPath())
{
while (segIterA.HasNextSegment())
{
com.epl.geometry.Segment segmentA = segIterA.NextSegment();
segmentA.QueryEnvelope2D(env_a);
if (!env_a.IsIntersecting(envInter))
{
continue;
}
b_found_red = true;
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D();
env.SetCoords(env_a);
intersector.AddRedEnvelope(segIterA.GetStartPointIndex(), env);
}
}
intersector.EndRedConstruction();
if (!b_found_red)
{
return(null);
}
bool b_found_blue = false;
intersector.StartBlueConstruction();
while (segIterB.NextPath())
{
while (segIterB.HasNextSegment())
{
com.epl.geometry.Segment segmentB = segIterB.NextSegment();
segmentB.QueryEnvelope2D(env_b);
if (!env_b.IsIntersecting(envInter))
{
continue;
}
b_found_blue = true;
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D();
env.SetCoords(env_b);
intersector.AddBlueEnvelope(segIterB.GetStartPointIndex(), env);
}
}
intersector.EndBlueConstruction();
if (!b_found_blue)
{
return(null);
}
return(intersector);
}
public override com.epl.geometry.RasterizedGeometry2D.HitType QueryEnvelopeInGeometry(com.epl.geometry.Envelope2D env)
{
if (!env.Intersect(m_geomEnv))
{
return(com.epl.geometry.RasterizedGeometry2D.HitType.Outside);
}
int ixmin = WorldToPixX(env.xmin);
int ixmax = WorldToPixX(env.xmax);
int iymin = WorldToPixY(env.ymin);
int iymax = WorldToPixY(env.ymax);
if (ixmin < 0)
{
ixmin = 0;
}
if (iymin < 0)
{
iymin = 0;
}
if (ixmax >= m_width)
{
ixmax = m_width - 1;
}
if (iymax >= m_width)
{
iymax = m_width - 1;
}
if (ixmin > ixmax || iymin > iymax)
{
return(com.epl.geometry.RasterizedGeometry2D.HitType.Outside);
}
int area = System.Math.Max(ixmax - ixmin, 1) * System.Math.Max(iymax - iymin, 1);
int iStart = 0;
int scanLineSize = m_scanLineSize;
int width = m_width;
int res = 0;
while (true)
{
if (area < 32 || width < 16)
{
for (int iy = iymin; iy <= iymax; iy++)
{
for (int ix = ixmin; ix <= ixmax; ix++)
{
int divix = ix >> 4;
int modix = (ix & 15) * 2;
res = (m_bitmap[iStart + scanLineSize * iy + divix] >> modix) & 3;
// read
// two
// bit
// color.
if (res > 1)
{
return(com.epl.geometry.RasterizedGeometry2D.HitType.Border);
}
}
}
if (res == 0)
{
return(com.epl.geometry.RasterizedGeometry2D.HitType.Outside);
}
else
{
if (res == 1)
{
return(com.epl.geometry.RasterizedGeometry2D.HitType.Inside);
}
}
}
iStart += scanLineSize * width;
width /= 2;
scanLineSize = (width * 2 + 31) / 32;
ixmin /= 2;
iymin /= 2;
ixmax /= 2;
iymax /= 2;
area = System.Math.Max(ixmax - ixmin, 1) * System.Math.Max(iymax - iymin, 1);
}
}
internal virtual com.epl.geometry.Geometry TryFastIntersectPolylinePolygon_(com.epl.geometry.Polyline polyline, com.epl.geometry.Polygon polygon)
{
com.epl.geometry.MultiPathImpl polylineImpl = (com.epl.geometry.MultiPathImpl)polyline._getImpl();
com.epl.geometry.MultiPathImpl polygonImpl = (com.epl.geometry.MultiPathImpl)polygon._getImpl();
double tolerance = com.epl.geometry.InternalUtils.CalculateToleranceFromGeometry(m_spatial_reference, polygon, false);
com.epl.geometry.Envelope2D clipEnvelope = new com.epl.geometry.Envelope2D();
{
polygonImpl.QueryEnvelope2D(clipEnvelope);
com.epl.geometry.Envelope2D env1 = new com.epl.geometry.Envelope2D();
polylineImpl.QueryEnvelope2D(env1);
env1.Inflate(2.0 * tolerance, 2.0 * tolerance);
clipEnvelope.Intersect(env1);
System.Diagnostics.Debug.Assert((!clipEnvelope.IsEmpty()));
}
clipEnvelope.Inflate(10 * tolerance, 10 * tolerance);
if (true)
{
double tol = 0;
com.epl.geometry.Geometry clippedPolyline = com.epl.geometry.Clipper.Clip(polyline, clipEnvelope, tol, 0.0);
polyline = (com.epl.geometry.Polyline)clippedPolyline;
polylineImpl = (com.epl.geometry.MultiPathImpl)polyline._getImpl();
}
com.epl.geometry.AttributeStreamOfInt32 clipResult = new com.epl.geometry.AttributeStreamOfInt32(0);
int unresolvedSegments = -1;
com.epl.geometry.GeometryAccelerators accel = polygonImpl._getAccelerators();
if (accel != null)
{
com.epl.geometry.RasterizedGeometry2D rgeom = accel.GetRasterizedGeometry();
if (rgeom != null)
{
unresolvedSegments = 0;
clipResult.Reserve(polylineImpl.GetPointCount() + polylineImpl.GetPathCount());
com.epl.geometry.Envelope2D seg_env = new com.epl.geometry.Envelope2D();
com.epl.geometry.SegmentIteratorImpl iter = polylineImpl.QuerySegmentIterator();
while (iter.NextPath())
{
while (iter.HasNextSegment())
{
com.epl.geometry.Segment seg = iter.NextSegment();
seg.QueryEnvelope2D(seg_env);
com.epl.geometry.RasterizedGeometry2D.HitType hit = rgeom.QueryEnvelopeInGeometry(seg_env);
if (hit == com.epl.geometry.RasterizedGeometry2D.HitType.Inside)
{
clipResult.Add(1);
}
else
{
if (hit == com.epl.geometry.RasterizedGeometry2D.HitType.Outside)
{
clipResult.Add(0);
}
else
{
clipResult.Add(-1);
unresolvedSegments++;
}
}
}
}
}
}
if (polygon.GetPointCount() > 5)
{
double tol = 0;
com.epl.geometry.Geometry clippedPolygon = com.epl.geometry.Clipper.Clip(polygon, clipEnvelope, tol, 0.0);
polygon = (com.epl.geometry.Polygon)clippedPolygon;
polygonImpl = (com.epl.geometry.MultiPathImpl)polygon._getImpl();
accel = polygonImpl._getAccelerators();
}
//update accelerators
if (unresolvedSegments < 0)
{
unresolvedSegments = polylineImpl.GetSegmentCount();
}
// Some heuristics to decide if it makes sense to go with fast intersect
// vs going with the regular planesweep.
double totalPoints = (double)(polylineImpl.GetPointCount() + polygonImpl.GetPointCount());
double thisAlgorithmComplexity = ((double)unresolvedSegments * polygonImpl.GetPointCount());
// assume the worst case.
double planesweepComplexity = System.Math.Log(totalPoints) * totalPoints;
double empiricConstantFactorPlaneSweep = 4;
if (thisAlgorithmComplexity > planesweepComplexity * empiricConstantFactorPlaneSweep)
{
// Based on the number of input points, we deduced that the
// plansweep performance should be better than the brute force
// performance.
return null;
}
// resort to planesweep if quadtree does not help
com.epl.geometry.QuadTreeImpl polygonQuadTree = null;
com.epl.geometry.SegmentIteratorImpl polygonIter = polygonImpl.QuerySegmentIterator();
// Some logic to decide if it makes sense to build a quadtree on the
// polygon segments
if (accel != null && accel.GetQuadTree() != null)
{
polygonQuadTree = accel.GetQuadTree();
}
if (polygonQuadTree == null && polygonImpl.GetPointCount() > 20)
{
polygonQuadTree = com.epl.geometry.InternalUtils.BuildQuadTree(polygonImpl);
}
com.epl.geometry.Polyline result_polyline = (com.epl.geometry.Polyline)polyline.CreateInstance();
com.epl.geometry.MultiPathImpl resultPolylineImpl = (com.epl.geometry.MultiPathImpl)result_polyline._getImpl();
com.epl.geometry.QuadTreeImpl.QuadTreeIteratorImpl qIter = null;
com.epl.geometry.SegmentIteratorImpl polylineIter = polylineImpl.QuerySegmentIterator();
double[] @params = new double[9];
com.epl.geometry.AttributeStreamOfDbl intersections = new com.epl.geometry.AttributeStreamOfDbl(0);
com.epl.geometry.SegmentBuffer segmentBuffer = new com.epl.geometry.SegmentBuffer();
int start_index = -1;
int inCount = 0;
int segIndex = 0;
bool bOptimized = clipResult.Size() > 0;
// The algorithm is like that:
// Loop through all the segments of the polyline.
// For each polyline segment, intersect it with each of the polygon
// segments.
// If no intersections found then,
// If the polyline segment is completely inside, it is added to the
// result polyline.
// If it is outside, it is thrown out.
// If it intersects, then cut the polyline segment to pieces and test
// each part of the intersected result.
// The cut pieces will either have one point inside, or one point
// outside, or the middle point inside/outside.
//
int polylinePathIndex = -1;
while (polylineIter.NextPath())
{
polylinePathIndex = polylineIter.GetPathIndex();
int stateNewPath = 0;
int stateAddSegment = 1;
int stateManySegments = 2;
int stateManySegmentsContinuePath = 2;
int stateManySegmentsNewPath = 3;
int state = stateNewPath;
start_index = -1;
inCount = 0;
while (polylineIter.HasNextSegment())
{
int clipStatus = bOptimized ? (int)clipResult.Get(segIndex) : -1;
segIndex++;
com.epl.geometry.Segment polylineSeg = polylineIter.NextSegment();
if (clipStatus < 0)
{
System.Diagnostics.Debug.Assert((clipStatus == -1));
// Analyse polyline segment for intersection with the
// polygon.
if (polygonQuadTree != null)
{
if (qIter == null)
{
qIter = polygonQuadTree.GetIterator(polylineSeg, tolerance);
}
else
{
qIter.ResetIterator(polylineSeg, tolerance);
}
int path_index = -1;
for (int ind = qIter.Next(); ind != -1; ind = qIter.Next())
{
polygonIter.ResetToVertex(polygonQuadTree.GetElement(ind));
// path_index
path_index = polygonIter.GetPathIndex();
com.epl.geometry.Segment polygonSeg = polygonIter.NextSegment();
// intersect polylineSeg and polygonSeg.
int count = polylineSeg.Intersect(polygonSeg, null, @params, null, tolerance);
for (int i = 0; i < count; i++)
{
intersections.Add(@params[i]);
}
}
}
else
{
// no quadtree built
polygonIter.ResetToFirstPath();
while (polygonIter.NextPath())
{
while (polygonIter.HasNextSegment())
{
com.epl.geometry.Segment polygonSeg = polygonIter.NextSegment();
// intersect polylineSeg and polygonSeg.
int count = polylineSeg.Intersect(polygonSeg, null, @params, null, tolerance);
for (int i = 0; i < count; i++)
{
intersections.Add(@params[i]);
}
}
}
}
if (intersections.Size() > 0)
{
// intersections detected.
intersections.Sort(0, intersections.Size());
// std::sort(intersections.begin(),
// intersections.end());
double t0 = 0;
intersections.Add(1.0);
int status = -1;
for (int i = 0, n = intersections.Size(); i < n; i++)
{
double t = intersections.Get(i);
if (t == t0)
{
continue;
}
bool bWholeSegment = false;
com.epl.geometry.Segment resSeg;
if (t0 != 0 || t != 1.0)
{
polylineSeg.Cut(t0, t, segmentBuffer);
resSeg = segmentBuffer.Get();
}
else
{
resSeg = polylineSeg;
bWholeSegment = true;
}
if (state >= stateManySegments)
{
resultPolylineImpl.AddSegmentsFromPath(polylineImpl, polylinePathIndex, start_index, inCount, state == stateManySegmentsNewPath);
if (AnalyseClipSegment_(polygon, resSeg.GetStartXY(), tolerance) != 1)
{
if (AnalyseClipSegment_(polygon, resSeg, tolerance) != 1)
{
return null;
}
}
//someting went wrong we'll falback to slower but robust planesweep code.
resultPolylineImpl.AddSegment(resSeg, false);
state = stateAddSegment;
inCount = 0;
}
else
{
status = AnalyseClipSegment_(polygon, resSeg, tolerance);
switch (status)
{
case 1:
{
if (!bWholeSegment)
{
resultPolylineImpl.AddSegment(resSeg, state == stateNewPath);
state = stateAddSegment;
}
else
{
if (state < stateManySegments)
{
start_index = polylineIter.GetStartPointIndex() - polylineImpl.GetPathStart(polylinePathIndex);
inCount = 1;
if (state == stateNewPath)
{
state = stateManySegmentsNewPath;
}
else
{
System.Diagnostics.Debug.Assert((state == stateAddSegment));
state = stateManySegmentsContinuePath;
}
}
else
{
inCount++;
}
}
break;
}
case 0:
{
state = stateNewPath;
start_index = -1;
inCount = 0;
break;
}
default:
{
return null;
}
}
}
// may happen if a segment
// coincides with the border.
t0 = t;
}
}
else
{
clipStatus = AnalyseClipSegment_(polygon, polylineSeg.GetStartXY(), tolerance);
// simple
// case
// no
// intersection.
// Both
// points
// must
// be
// inside.
if (clipStatus < 0)
{
System.Diagnostics.Debug.Assert((clipStatus >= 0));
return null;
}
// something goes wrong, resort to
// planesweep
System.Diagnostics.Debug.Assert((AnalyseClipSegment_(polygon, polylineSeg.GetEndXY(), tolerance) == clipStatus));
if (clipStatus == 1)
{
// the whole segment inside
if (state < stateManySegments)
{
System.Diagnostics.Debug.Assert((inCount == 0));
start_index = polylineIter.GetStartPointIndex() - polylineImpl.GetPathStart(polylinePathIndex);
if (state == stateNewPath)
{
state = stateManySegmentsNewPath;
}
else
{
System.Diagnostics.Debug.Assert((state == stateAddSegment));
state = stateManySegmentsContinuePath;
}
}
inCount++;
}
else
{
System.Diagnostics.Debug.Assert((state < stateManySegments));
start_index = -1;
inCount = 0;
}
}
intersections.Clear(false);
}
else
{
// clip status is determined by other means
if (clipStatus == 0)
{
// outside
System.Diagnostics.Debug.Assert((AnalyseClipSegment_(polygon, polylineSeg, tolerance) == 0));
System.Diagnostics.Debug.Assert((start_index < 0));
System.Diagnostics.Debug.Assert((inCount == 0));
continue;
}
if (clipStatus == 1)
{
System.Diagnostics.Debug.Assert((AnalyseClipSegment_(polygon, polylineSeg, tolerance) == 1));
if (state == stateNewPath)
{
state = stateManySegmentsNewPath;
start_index = polylineIter.GetStartPointIndex() - polylineImpl.GetPathStart(polylinePathIndex);
}
else
{
if (state == stateAddSegment)
{
state = stateManySegmentsContinuePath;
start_index = polylineIter.GetStartPointIndex() - polylineImpl.GetPathStart(polylinePathIndex);
}
else
{
System.Diagnostics.Debug.Assert((state >= stateManySegments));
}
}
inCount++;
continue;
}
}
}
if (state >= stateManySegments)
{
resultPolylineImpl.AddSegmentsFromPath(polylineImpl, polylinePathIndex, start_index, inCount, state == stateManySegmentsNewPath);
start_index = -1;
}
}
return result_polyline;
}
internal virtual com.epl.geometry.Geometry TryNativeImplementation_(com.epl.geometry.Geometry input_geom)
{
// A note on attributes:
// 1. The geometry with lower dimension wins in regard to the
// attributes.
// 2. If the dimensions are the same, the input_geometry attributes win.
// 3. The exception to the 2. is when the input is an Envelope, and the
// intersector is a polygon, then the intersector wins.
// A note on the tolerance:
// This operator performs a simple intersection operation. Should it use
// the tolerance?
// Example: Point is intersected by the envelope.
// If it is slightly outside of the envelope, should we still return it
// if it is closer than the tolerance?
// Should we do crack and cluster and snap the point coordinates to the
// envelope boundary?
//
// Consider floating point arithmetics approach. When you compare
// doubles, you should use an epsilon (equals means ::fabs(a - b) <
// eps), however when you add/subtract, etc them, you do not use
// epsilon.
// Shouldn't we do same here? Relational operators use tolerance, but
// the action operators don't.
com.epl.geometry.Envelope2D mergedExtent = com.epl.geometry.InternalUtils.GetMergedExtent(input_geom, m_geomIntersector);
double tolerance = com.epl.geometry.InternalUtils.CalculateToleranceFromGeometry(m_spatial_reference, mergedExtent, false);
int gtInput = input_geom.GetType().Value();
bool bInputEmpty = input_geom.IsEmpty();
bool bGeomIntersectorEmpty = m_geomIntersector.IsEmpty();
bool bResultIsEmpty = bInputEmpty || bGeomIntersectorEmpty;
if (!bResultIsEmpty)
{
// test envelopes
com.epl.geometry.Envelope2D env2D1 = new com.epl.geometry.Envelope2D();
input_geom.QueryEnvelope2D(env2D1);
com.epl.geometry.Envelope2D env2D2 = new com.epl.geometry.Envelope2D();
m_geomIntersector.QueryEnvelope2D(env2D2);
env2D2.Inflate(2.0 * tolerance, 2.0 * tolerance);
bResultIsEmpty = !env2D1.IsIntersecting(env2D2);
}
if (!bResultIsEmpty)
{
// try accelerated test
int res = com.epl.geometry.OperatorInternalRelationUtils.QuickTest2D_Accelerated_DisjointOrContains(m_geomIntersector, input_geom, tolerance);
if (res == com.epl.geometry.OperatorInternalRelationUtils.Relation.Disjoint)
{
// disjoint
bResultIsEmpty = true;
}
else
{
if ((res & com.epl.geometry.OperatorInternalRelationUtils.Relation.Within) != 0)
{
// intersector
// is
// within
// the
// input_geom
// TODO:
// assign
// input_geom
// attributes
// first
return m_geomIntersector;
}
else
{
if ((res & com.epl.geometry.OperatorInternalRelationUtils.Relation.Contains) != 0)
{
// intersector
// contains
// input_geom
return input_geom;
}
}
}
}
if (bResultIsEmpty)
{
// When one geometry or both are empty, we need to
// return an empty geometry.
// Here we do that end also ensure the type is
// correct.
// That is the lower dimension need to be
// returned. Also, for Point vs Multi_point, an
// empty Point need to be returned.
int dim1 = com.epl.geometry.Geometry.GetDimensionFromType(gtInput);
int dim2 = com.epl.geometry.Geometry.GetDimensionFromType(m_geomIntersectorType);
if (dim1 < dim2)
{
return ReturnEmpty_(input_geom, bInputEmpty);
}
else
{
if (dim1 > dim2)
{
return ReturnEmptyIntersector_();
}
else
{
if (dim1 == 0)
{
if (gtInput == com.epl.geometry.Geometry.GeometryType.MultiPoint && m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Point)
{
// point
// vs
// Multi_point
// need
// special
// treatment
// to
// ensure
// Point
// is
// returned
// always.
return ReturnEmptyIntersector_();
}
else
{
// Both input and intersector have same gtype, or input is
// Point.
return ReturnEmpty_(input_geom, bInputEmpty);
}
}
else
{
return ReturnEmpty_(input_geom, bInputEmpty);
}
}
}
}
// Note: No empty geometries after this point!
// Warning: Do not try clip for polylines and polygons.
// Try clip of Envelope with Envelope.
if ((m_dimensionMask == -1 || m_dimensionMask == (1 << 2)) && gtInput == com.epl.geometry.Geometry.GeometryType.Envelope && m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Envelope)
{
com.epl.geometry.Envelope env1 = (com.epl.geometry.Envelope)input_geom;
com.epl.geometry.Envelope env2 = (com.epl.geometry.Envelope)m_geomIntersector;
com.epl.geometry.Envelope2D env2D_1 = new com.epl.geometry.Envelope2D();
env1.QueryEnvelope2D(env2D_1);
com.epl.geometry.Envelope2D env2D_2 = new com.epl.geometry.Envelope2D();
env2.QueryEnvelope2D(env2D_2);
env2D_1.Intersect(env2D_2);
com.epl.geometry.Envelope result_env = new com.epl.geometry.Envelope();
env1.CopyTo(result_env);
result_env.SetEnvelope2D(env2D_1);
return result_env;
}
// Use clip for Point and Multi_point with Envelope
if ((gtInput == com.epl.geometry.Geometry.GeometryType.Envelope && com.epl.geometry.Geometry.GetDimensionFromType(m_geomIntersectorType) == 0) || (m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Envelope && com.epl.geometry.Geometry.GetDimensionFromType(gtInput
) == 0))
{
com.epl.geometry.Envelope env = gtInput == com.epl.geometry.Geometry.GeometryType.Envelope ? (com.epl.geometry.Envelope)input_geom : (com.epl.geometry.Envelope)m_geomIntersector;
com.epl.geometry.Geometry other = gtInput == com.epl.geometry.Geometry.GeometryType.Envelope ? m_geomIntersector : input_geom;
com.epl.geometry.Envelope2D env_2D = new com.epl.geometry.Envelope2D();
env.QueryEnvelope2D(env_2D);
return com.epl.geometry.Clipper.Clip(other, env_2D, tolerance, 0);
}
if ((com.epl.geometry.Geometry.GetDimensionFromType(gtInput) == 0 && com.epl.geometry.Geometry.GetDimensionFromType(m_geomIntersectorType) > 0) || (com.epl.geometry.Geometry.GetDimensionFromType(gtInput) > 0 && com.epl.geometry.Geometry.GetDimensionFromType(m_geomIntersectorType
) == 0))
{
// multipoint
// intersection
double tolerance1 = com.epl.geometry.InternalUtils.CalculateToleranceFromGeometry(m_spatial_reference, input_geom, false);
if (gtInput == com.epl.geometry.Geometry.GeometryType.MultiPoint)
{
return com.epl.geometry.TopologicalOperations.Intersection((com.epl.geometry.MultiPoint)input_geom, m_geomIntersector, tolerance1);
}
if (gtInput == com.epl.geometry.Geometry.GeometryType.Point)
{
return com.epl.geometry.TopologicalOperations.Intersection((com.epl.geometry.Point)input_geom, m_geomIntersector, tolerance1);
}
if (m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.MultiPoint)
{
return com.epl.geometry.TopologicalOperations.Intersection((com.epl.geometry.MultiPoint)m_geomIntersector, input_geom, tolerance1);
}
if (m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Point)
{
return com.epl.geometry.TopologicalOperations.Intersection((com.epl.geometry.Point)m_geomIntersector, input_geom, tolerance1);
}
throw com.epl.geometry.GeometryException.GeometryInternalError();
}
// Try Polyline vs Polygon
if ((m_dimensionMask == -1 || m_dimensionMask == (1 << 1)) && (gtInput == com.epl.geometry.Geometry.GeometryType.Polyline) && (m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Polygon))
{
return TryFastIntersectPolylinePolygon_((com.epl.geometry.Polyline)(input_geom), (com.epl.geometry.Polygon)(m_geomIntersector));
}
// Try Polygon vs Polyline
if ((m_dimensionMask == -1 || m_dimensionMask == (1 << 1)) && (gtInput == com.epl.geometry.Geometry.GeometryType.Polygon) && (m_geomIntersectorType == com.epl.geometry.Geometry.GeometryType.Polyline))
{
return TryFastIntersectPolylinePolygon_((com.epl.geometry.Polyline)(m_geomIntersector), (com.epl.geometry.Polygon)(input_geom));
}
return null;
}
public static void Test_perf_quad_tree()
{
com.epl.geometry.Envelope extent1 = new com.epl.geometry.Envelope();
extent1.SetCoords(-1000, -1000, 1000, 1000);
com.epl.geometry.RandomCoordinateGenerator generator1 = new com.epl.geometry.RandomCoordinateGenerator(1000, extent1, 0.001);
//HiResTimer timer;
for (int N = 16; N <= 1024; N *= 2)
{
//timer.StartMeasurement();
com.epl.geometry.Envelope2D extent = new com.epl.geometry.Envelope2D();
extent.SetCoords(-1000, -1000, 1000, 1000);
System.Collections.Generic.Dictionary <int, com.epl.geometry.Envelope2D> data = new System.Collections.Generic.Dictionary <int, com.epl.geometry.Envelope2D>(0);
com.epl.geometry.QuadTree qt = new com.epl.geometry.QuadTree(extent, 10);
for (int i = 0; i < N; i++)
{
com.epl.geometry.Envelope2D env = new com.epl.geometry.Envelope2D();
com.epl.geometry.Point2D center = generator1.GetRandomCoord().GetXY();
double w = 10;
env.SetCoords(center, w, w);
env.Intersect(extent);
if (env.IsEmpty())
{
continue;
}
int h = qt.Insert(i, env);
data[h] = env;
}
int ecount = 0;
com.epl.geometry.AttributeStreamOfInt32 handles = new com.epl.geometry.AttributeStreamOfInt32(0);
com.epl.geometry.QuadTree.QuadTreeIterator iter = qt.GetIterator();
System.Collections.Generic.IEnumerator <System.Collections.Generic.KeyValuePair <int, com.epl.geometry.Envelope2D> > pairs = data.GetEnumerator();
while (pairs.MoveNext())
{
System.Collections.Generic.KeyValuePair <int, com.epl.geometry.Envelope2D> entry = pairs.Current;
iter.ResetIterator((com.epl.geometry.Envelope2D)entry.Value, 0.001);
bool remove_self = false;
for (int h = iter.Next(); h != -1; h = iter.Next())
{
if (h != entry.Key)
{
handles.Add(h);
}
else
{
remove_self = true;
}
ecount++;
}
for (int i_1 = 0; i_1 < handles.Size(); i_1++)
{
qt.RemoveElement(handles.Get(i_1));
}
//remove elements that were selected.
if (remove_self)
{
qt.RemoveElement(entry.Key);
}
handles.Resize(0);
}
}
}