protected override void OnClick() { IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); //first get the selected parcel features UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected Parcels"); return; } IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IArray CFParcelLayers = new ArrayClass(); if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer, out CFParcelLayers, out CFControlLayer, out CFLinePointLayer))) { return; //no fabric sublayers available for the targeted fabric } bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; IWorkspace pWS = null; ICadastralFabricLayer pCFLayer = null; ITable pParcelsTable = null; ITable pLinesTable = null; ITable pLinePtsTable = null; ITable pPointsTable = null; ITable pControlTable = null; try { //Get the selection of parcels IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedDelete)) { return; } if (bUseNonVersionedDelete) { pCFLayer = new CadastralFabricLayerClass(); pCFLayer.CadastralFabric = pCadFabric; pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done. } ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd; IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0) { MessageBox.Show("Please select some fabric parcels and try again.", "No Selection", MessageBoxButtons.OK, MessageBoxIcon.Information); pMouseCursor.SetCursor(0); if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFParcelLayers = null; CFPointLayer = null; CFLineLayer = null; CFControlLayer = null; CFLinePointLayer = null; } return; } if (bMoreThan995UnjoinedParcels) { m_bShowProgressor = (pSelSet.Count > 10); } else { m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10); } if (m_bShowProgressor) { m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 1; if (bMoreThan995UnjoinedParcels) { m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list) } else { m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list) } m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } m_pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); //====== need to do this for all the parcel sublayers in the map that are part of the target fabric if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Collecting parcel data..."; } //Add the OIDs of all the selected parcels into a new feature IDSet string[] sOIDList = { "(" }; int tokenLimit = 995; bool bCont = true; int j = 0; int iCounter = 0; m_pFIDSetParcels = new FIDSetClass(); //===================== start bug workaraound for 10.0 client =================== if (bMoreThan995UnjoinedParcels) { ICursor pCursor = null; pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor; IFeature pParcFeat = pParcelFeatCurs.NextFeature(); while (pParcFeat != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { bCont = m_pTrackCancel.Continue(); if (!bCont) { break; } } bool bExists = false; m_pFIDSetParcels.Find(pParcFeat.OID, out bExists); if (!bExists) { m_pFIDSetParcels.Add(pParcFeat.OID); if (iCounter <= tokenLimit) { sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ","; iCounter++; } else {//maximum tokens reached sOIDList[j] = sOIDList[j].Trim(); iCounter = 0; //set up the next OIDList j++; FabricUTILS.RedimPreserveString(ref sOIDList, 1); sOIDList[j] = "("; sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ","; } } Marshal.ReleaseComObject(pParcFeat); //garbage collection pParcFeat = pParcelFeatCurs.NextFeature(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pCursor); //garbage collection //===================== end bug workaraound for 10.0 client =================== } else //===the following code path is preferred====== { pEnumGSParcels.Reset(); IGSParcel pGSParcel = pEnumGSParcels.Next(); while (pGSParcel != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { bCont = m_pTrackCancel.Continue(); if (!bCont) { break; } } m_pFIDSetParcels.Add(pGSParcel.DatabaseId); if (iCounter <= tokenLimit) { sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ","; iCounter++; } else {//maximum tokens reached sOIDList[j] = sOIDList[j].Trim(); iCounter = 0; //set up the next OIDList j++; FabricUTILS.RedimPreserveString(ref sOIDList, 1); sOIDList[j] = "("; sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ","; } Marshal.ReleaseComObject(pGSParcel); //garbage collection pGSParcel = pEnumGSParcels.Next(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection } if (!bCont) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } string sTime = ""; if (!bIsUnVersioned && !bIsFileBasedGDB) { //see if parcel locks can be obtained on the selected parcels. First create a job. DateTime localNow = DateTime.Now; sTime = Convert.ToString(localNow); ICadastralJob pJob = new CadastralJobClass(); pJob.Name = sTime; pJob.Owner = System.Windows.Forms.SystemInformation.UserName; pJob.Description = "Delete selected parcels"; try { Int32 jobId = pCadFabric.CreateJob(pJob); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS) { MessageBox.Show("Job named: '" + pJob.Name + "', already exists"); } else { MessageBox.Show(ex.Message); } return; } } //if we're in an enterprise then test for edit locks ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric; if (!bIsUnVersioned && !bIsFileBasedGDB) { pFabLocks.LockingJob = sTime; ILongArray pLocksInConflict = null; ILongArray pSoftLcksInConflict = null; ILongArray pParcelsToLock = new LongArrayClass(); FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor); if (m_bShowProgressor && !bIsFileBasedGDB) { m_pStepProgressor.Message = "Testing for edit locks on parcels..."; } try { pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict); } catch (COMException pCOMEx) { if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS || pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED) { MessageBox.Show("Edit Locks could not be acquired on all selected parcels."); // since the operation is being aborted, release any locks that were acquired pFabLocks.UndoLastAcquiredLocks(); } else { MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode)); } return; } } //Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines m_pFIDSetLines = new FIDSetClass(); m_pFIDSetPoints = new FIDSetClass(); if (pEd.EditState == esriEditState.esriStateEditing) { try { pEd.StartOperation(); } catch { pEd.AbortOperation();//abort any open edit operations and try again pEd.StartOperation(); } } if (bUseNonVersionedDelete) { if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { return; } } //first delete all the parcel records if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting parcels..."; } bool bSuccess = true; pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); if (!bIsUnVersioned) { //check version and if the Cancel button was not clicked and we're higher than //version 10.0, then re-try the delete with the core delete command string sVersion = Application.ProductVersion; int iErrCode = FabricUTILS.LastErrorCode; if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400) { FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}"); } } return; } //next need to use an in clause for lines, so ... string[] sPointOIDList = { "" }; int iCnt = 0; int iTokenCnt = 0; int iStepCnt = 1; //...for each item in the sOIDList array foreach (string inClause in sOIDList) { ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID"); IRow pRow = pLineCurs.NextRow(); Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID"); Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID"); while (pRow != null) { if (iTokenCnt >= tokenLimit) { FabricUTILS.RedimPreserveString(ref sPointOIDList, 1); iTokenCnt = 0; iCnt++; } m_pFIDSetLines.Add(pRow.OID); Int32 i = (Int32)pRow.get_Value(iFromPt); if (i > -1) { bool bExists = false; m_pFIDSetPoints.Find(i, out bExists); if (!bExists) { m_pFIDSetPoints.Add(i); sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ","; iTokenCnt++; } } i = (Int32)pRow.get_Value(iToPt); if (i > -1) { bool bExists = false; m_pFIDSetPoints.Find(i, out bExists); if (!bExists) { m_pFIDSetPoints.Add(i); sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ","; iTokenCnt++; } } Marshal.ReleaseComObject(pRow); //garbage collection pRow = pLineCurs.NextRow(); } Marshal.ReleaseComObject(pLineCurs); //garbage collection //delete line records based on the selected parcels string sMessage = "Deleting lines..."; int iSetCnt = sOIDList.GetLength(0); if (iSetCnt > 1) { sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt); } if (m_bShowProgressor) { m_pStepProgressor.Message = sMessage; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } //delete the line points for the deleted parcels //build the list of the line points that need to be deleted. //IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass; string NewInClause = ""; //remove trailing comma if ((inClause.Substring(inClause.Length - 1, 1)) == ",") { NewInClause = inClause.Substring(0, inClause.Length - 1); } //m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")"; m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")"; ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false); IRow pLinePointFeat = pLinePointCurs.NextRow(); //Build an IDSet of linepoints for parcels to be deleted IFIDSet pFIDSetLinePoints = new FIDSetClass(); while (pLinePointFeat != null) { pFIDSetLinePoints.Add(pLinePointFeat.OID); Marshal.ReleaseComObject(pLinePointFeat); //garbage collection pLinePointFeat = pLinePointCurs.NextRow(); } //===========deletes linepoints associated with parcels iSetCnt = sOIDList.GetLength(0); sMessage = "Deleting line-points..."; if (iSetCnt > 1) { sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt); } if (m_bShowProgressor) { m_pStepProgressor.Message = sMessage; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable, pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable, pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); if (pLinePointCurs != null) { Marshal.ReleaseComObject(pLinePointCurs); //garbage } return; } ///////============================================== Marshal.ReleaseComObject(pLinePointCurs); //garbage iStepCnt++; } //now need to get points that should not be deleted, because they are used by lines that are not deleted. //first search for the remaining lines. Any that have from/to points that are in the point fidset are the points //that should stay IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass(); IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass(); if (m_bShowProgressor) { m_pStepProgressor.Message = "Updating point delete list..."; } for (int z = 0; z <= iCnt; z++) { //remove trailing comma if ((sPointOIDList[z].Trim() == "")) { break; } if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",") { sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1); } } //string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN ("; //UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid", // TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom); //TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN ("; //UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid", // TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo); string TheWhereClause = "(FROMPOINTID IN ("; UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID", TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom); TheWhereClause = "(TOPOINTID IN ("; UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID", TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo); if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting points..."; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } //====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points. if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting line-points..."; } for (int z = 0; z <= iCnt; z++) { if ((sPointOIDList[z].Trim() == "")) { continue; } //remove line points where underlying points were deleted bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")), sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel); if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } } //===== //Empty geometry on points that are floating points on unjoined parcels m_pEmptyGeoms = new FIDSetClass(); FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms); ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch if (!bUseNonVersionedDelete) { FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms); } else { FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms); } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on if (m_bShowProgressor) { m_pStepProgressor.Message = "Resetting control point associations..."; } for (int z = 0; z <= iCnt; z++) { if ((sPointOIDList[z].Trim() == "")) { break; } //cleanup associated control points, and associations where underlying points were deleted //m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")"; m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")"; pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on } } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on if (bUseNonVersionedDelete) { FabricUTILS.StopEditing(pWS); } if (pEd.EditState == esriEditState.esriStateEditing) { pEd.StopOperation("Delete parcels"); } //clear selection, to make sure the parcel explorer is updated and refreshed properly if (pFeatSel != null && bMoreThan995UnjoinedParcels) { pFeatSel.Clear(); } } catch (Exception ex) { if (bUseNonVersionedDelete) { FabricUTILS.AbortEditing(pWS); } if (pEd != null) { if (pEd.EditState == esriEditState.esriStateEditing) { pEd.AbortOperation(); } } MessageBox.Show(ex.Message); return; } finally { RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer); //update the TOC IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document); for (int i = 0; i < mxDocument.ContentsViewCount; i++) { IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i); pCV.Refresh(null); } if (pMouseCursor != null) { pMouseCursor.SetCursor(0); } m_pStepProgressor = null; if (!(pProgressorDialog == null)) { pProgressorDialog.HideDialog(); } pProgressorDialog = null; if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFParcelLayers = null; CFPointLayer = null; CFLineLayer = null; CFControlLayer = null; CFLinePointLayer = null; } } }