void monitorAction(object source, System.Timers.ElapsedEventArgs e)
{
alarmDelegate md = new alarmDelegate(monitoractive);
// daq.EventCount_Read();
try { Invoke(md, new object[] { doData }); }
catch
{ }
}
void theout(object source, System.Timers.ElapsedEventArgs e)
{
byte diData = daq.InstantDi_Read();
alarmDelegate md = new alarmDelegate(alarmactive);
// daq.EventCount_Read();
try
{
if (this.IsHandleCreated)
{
this.Invoke(md, new object[] { doData, diData });
}
}
catch { }
}
void monitorAction(object source)
{
byte diData = daq.InstantDi_Read();
alarmDelegate md = new alarmDelegate(alarmactive);
// daq.EventCount_Read();
try
{
if (this.IsHandleCreated)
{
this.Invoke(md, new object[] { doData, diData });
}
}
catch { }
}
void theout(object source)
{
byte diData = daq.InstantDi_Read();
alarmDelegate mdd = new alarmDelegate(alarmactive);
// daq.EventCount_Read();
try
{
if (this.IsHandleCreated && !this.IsDisposed)
{
this.Invoke(mdd, new object[] { doData, diData });
}
}
catch { }
//通道0 压力 pressure
//通道1 水冲击力 waterHammer
//通道2 温度
//通道3 水泵压力输出值
//modbus 流量
double[] data = daq.InstantAi_Read(0, 4);
double flow = mr.read_float("3002", 1); //读取3002地址的数据，单位立方米/s
flow = flow * 1000; //转换成L/s
flow = flow + Convert.ToDouble(Properties.Settings.Default.m流量); //加上误差调整
totalFlow = mr.read_double("3014", 1); //单位立方米
totalFlow = totalFlow * 1000; //单位：L
data[4] = flow;
data[5] = Math.Round(mr.read_short("8451", 2) / 100.0, 2);
FLOW = flow;
data[2] = data[2] * 10 + Convert.ToDouble(Properties.Settings.Default.m温度);
if (loadDataFlag && (FLOW >= (double)startThreshold.Value))//大于阈值开始绘制曲线以及记录数据
{
l.Add(data[4]);
if (wendu.Count < 1)
{
wendu.Add(data[2]);
}
else if ((Math.Abs(data[2] - wendu[wendu.Count - 1]) <= 1 &&
data[2] < 50))
{
wendu.Add(data[2]);
}
maxFlow = l.Max();
maxflow_pose = l.IndexOf(l.Max());
//连续采样N个数据，去掉一个最大值和一个最小值然后计算N - 2个数据的算术平均值N值的选取：3~14
//if (l.Count > 8)
//{
// double sum = 0;
// List<double> temp = new List<double>();
// for (int i = 1; i < 8; i++)
// {
// temp.Add(l[l.Count - i]);
// sum += l[l.Count - i];
// }
// sum = sum - temp.Max() - temp.Min();
// l[l.Count - 4] = (sum / 5);
// if (l[l.Count - 4] > maxFlow) { maxFlow = l[l.Count - 4]; }
// maxflow_pose = l.IndexOf(l.Max()) ;
//}
}
myDelegate md = new myDelegate(setText);
// daq.EventCount_Read();
// if (IsDisposed || !this.Parent.IsHandleCreated) return;
try
{
if (this.IsHandleCreated && !this.IsDisposed)
{
this.Invoke(md, new object[] { data });
}
}
catch { }
}
