public bool Perform_Set_Error_Recovery_Mode_Print(string cardType)
{
bool bRet = true;
byte[] img = null;
byte[] bmp = null;
byte[] monoBmp = null;
Job job = null;
ZMotifGraphics g = null;
try
{
job = new Job();
g = new ZMotifGraphics();
// Opens a connection with a ZXP Printer
// if it is in an alarm condition, exit function
// -------------------------------------------------
if (!Connect(ref job))
{
_msg = "Unable to open device [" + _deviceName + "]";
return(false);
}
if (_alarm != 0)
{
_msg = "Printer is in alarm condition" + "Error: " + job.Device.GetStatusMessageString(_alarm);
return(false);
}
if (_isZXP7)
{
FrontImage = "ZXP7Front.bmp";
}
else
{
FrontImage = "ZXP8Front.bmp";
}
img = g.ImageFileToByteArray(FrontImage);
// Builds the image to print
// -------------------------
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.Color);
g.DrawImage(ref img, 50, 50, 924, 548, 0);
g.DrawTextString(50.0f, 580.0f, "Color + Set Error Recovery Mode", "Arial", 10.0f,
ZMotifGraphics.FontTypeEnum.Regular,
g.IntegerFromColor(System.Drawing.Color.Black));
int dataLen = 0;
bmp = g.CreateBitmap(out dataLen);
g.ClearGraphics();
//re-init graphics for MonoK panel
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.MonoK);
//load image to be printed as MonoK panel:
img = g.ImageFileToByteArray("Back.bmp");
g.DrawImage(ref img, 50, 50, 924, 548, 0);
dataLen = 0;
monoBmp = g.CreateBitmap(out dataLen);
// Print image on both sides
// -------------------------
if (!_isZXP7)
{
job.JobControl.CardType = cardType;
}
job.JobControl.FeederSource = FeederSourceEnum.CardFeeder;
if (job.Device.HasLaminator)
{
job.JobControl.Destination = DestinationTypeEnum.LaminatorAny;
}
else
{
job.JobControl.Destination = DestinationTypeEnum.Eject;
}
//SET ERROR RECOVERY MODE FOR PRINTER:
job.Device.ErrorControlLevel = ErrorControlLevelEnum.EC_None;
job.BuildGraphicsLayers(SideEnum.Front, PrintTypeEnum.Color, 0, 0, 0, -1, GraphicTypeEnum.BMP, bmp);
job.BuildGraphicsLayers(SideEnum.Back, PrintTypeEnum.MonoK, 0, 0, 0, -1, GraphicTypeEnum.BMP, monoBmp);
int actionID = 0;
job.PrintGraphicsLayers(1, out actionID);
job.ClearGraphicsLayers();
string status = string.Empty;
JobWait(ref job, actionID, 180, out status);
}
catch (Exception e)
{
bRet = false;
_msg = e.Message;
}
finally
{
g.CloseGraphics();
g = null;
img = null;
bmp = null;
Disconnect(ref job);
}
return(bRet);
}
public bool Perform_MonochromePrint(string cardType)
{
bool bRet = true;
byte[] img = null;
byte[] bmp = null;
byte[] colorBmp = null;
byte[] monoBmp = null;
Job job = null;
ZMotifGraphics g = null;
try
{
job = new Job();
g = new ZMotifGraphics();
// Opens a connection with a ZXP Printer
// if it is in an alarm condition, exit function
// -------------------------------------------------
if (!Connect(ref job))
{
_msg = "Unable to open device [" + _deviceName + "]";
return(false);
}
if (_alarm != 0)
{
_msg = "Printer is in alarm condition" + "Error: " + job.Device.GetStatusMessageString(_alarm);
return(false);
}
if (_isZXP7)
{
FrontImage = "ZXP7Front.bmp";
}
else
{
FrontImage = "ZXP8Front.bmp";
}
img = g.ImageFileToByteArray(FrontImage);
// Builds the image to print
// -------------------------
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.Color);
g.DrawImage(ref img, 50, 50, 924, 548, 0);
g.DrawTextString(50.0f, 580.0f, "Monochrome Print", "Arial", 10.0f,
ZMotifGraphics.FontTypeEnum.Regular,
g.IntegerFromColor(System.Drawing.Color.Black));
int dataLen;
bmp = g.CreateBitmap(out dataLen);
g.ExtractBlackData(ref bmp, ref colorBmp, ref monoBmp);
g.ClearGraphics();
if (!_isZXP7)
{
job.JobControl.CardType = cardType;
}
job.JobControl.FeederSource = FeederSourceEnum.CardFeeder;
if (job.Device.HasLaminator)
{
job.JobControl.Destination = DestinationTypeEnum.LaminatorAny;
}
else
{
job.JobControl.Destination = DestinationTypeEnum.Eject;
}
//job.BuildGraphicsLayers(SideEnum.Front, PrintTypeEnum.Color, 0, 0, 0,
// -1, GraphicTypeEnum.BMP, colorBmp);
job.BuildGraphicsLayers(SideEnum.Front, PrintTypeEnum.MonoK, 0, 0, 0,
-1, GraphicTypeEnum.BMP, monoBmp);
int actionID = 0;
job.PrintGraphicsLayers(1, out actionID);
job.ClearGraphicsLayers();
string status = string.Empty;
JobWait(ref job, actionID, 180, out status);
}
catch (Exception e)
{
bRet = false;
_msg = e.Message;
}
finally
{
g.CloseGraphics();
g = null;
img = null;
bmp = null;
Disconnect(ref job);
}
return(bRet);
}
public bool PrintAndWriteSmartCard(PrintAndWriteSmartCardInfo cardInfo, Action <PrintAndWriteCardResult> OnCompleted)
{
try
{
// validate
if (cardInfo == null)
{
throw new Exception("cardInfo can not be null");
}
PrintAndWriteCardResult returnValue = new PrintAndWriteCardResult()
{
Success = false
};
if (IsPrinterConnected(EnumDeviceNames.SmartCardPrinterName))
{
#region use SmartCardPrinterName
byte[] img = null;
byte[] bmpFront = null;
byte[] bmpBack = null;
Job job = null;
ZMotifGraphics g = null;
string frontImagePath, backImagePath = null;
try
{
job = new Job();
g = new ZMotifGraphics();
// Opens a connection with a ZXP Printer
// if it is in an alarm condition, exit function
// -------------------------------------------------
if (!Connect(ref job))
{
throw new Exception("Unable to open device [" + _smartCardPrinterName + "]\r\n");
}
// Determines if the ZXP device supports smart card encoding
// ---------------------------------------------------------
if (!GetPrinterConfiguration(ref job, out bool isContactless))
{
throw new Exception("Unable to get printer configuration");
}
if (!isContactless)
{
throw new Exception("Printer is not configured for Contactless Encoding");
}
if (_alarm != 0)
{
throw new Exception("Printer is in alarm condition\r\n");
}
frontImagePath = cardInfo.FrontCardImagePath;
backImagePath = cardInfo.BackCardImagePath;
// Builds the front side image (color)
// -----------------------------------
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.Color);
img = g.ImageFileToByteArray(frontImagePath);
g.DrawImage(ref img, ZMotifGraphics.ImagePositionEnum.Centered, 1024, 648, 0);
int dataLen = 0;
bmpFront = g.CreateBitmap(out dataLen);
g.ClearGraphics();
// Builds the back side image (monochrome)
// ---------------------------------------
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.MonoK);
img = g.ImageFileToByteArray(backImagePath);
g.DrawImage(ref img, ZMotifGraphics.ImagePositionEnum.Centered, 1024, 648, 0);
bmpBack = g.CreateBitmap(out dataLen);
g.ClearGraphics();
// Start a contactless smart card job
// -----------------------
//job.JobControl.CardType = GetContactlessCardType(ref job);
//job.JobControl.CardType = "PVC,MIFARE,4K";
job.JobControl.FeederSource = FeederSourceEnum.CardFeeder;
job.JobControl.Destination = DestinationTypeEnum.Eject;
job.JobControl.SmartCardConfiguration(SideEnum.Front, SmartCardTypeEnum.MIFARE, true);
job.BuildGraphicsLayers(SideEnum.Front, PrintTypeEnum.Color, 0, 0, 0,
-1, GraphicTypeEnum.BMP, bmpFront);
job.BuildGraphicsLayers(SideEnum.Back, PrintTypeEnum.MonoK, 0, 0, 0,
-1, GraphicTypeEnum.BMP, bmpBack);
int actionID = 0;
job.PrintGraphicsLayers(1, out actionID);
job.ClearGraphicsLayers();
// Waits for the card to reach the smart card station
// --------------------------------------------------
string status = string.Empty;
AtStation(ref job, actionID, 30, out status);
// ***** Smart Card Code goes here *****
SmartCardData_Original cardData = new SmartCardData_Original()
{
SuperviseeBiodata = cardInfo.SuperviseeBiodata,
DutyOfficerData = cardInfo.DutyOfficerData
};
// write data
bool writeDataResult = SmartCardReaderUtil.Instance.WriteData(cardData, EnumDeviceNames.SmartCardPrinterContactlessReader);
if (writeDataResult)
{
// get card UID
returnValue.CardUID = SmartCardReaderUtil.Instance.GetCardUID(EnumDeviceNames.SmartCardPrinterContactlessReader);
}
// At the completion of smart card process
// if the smart card encoding was successful JobResume
// if the smart card encoding was Unsuccessful JobAbort
// --------------------------------------------------------
if (writeDataResult)
{
JobResume(ref job);
}
else
{
JobAbort(ref job, true);
}
JobWait(ref job, actionID, 180, out status);
// need to verify printing status
}
catch (Exception e)
{
Debug.WriteLine(e.Message);
}
finally
{
g.CloseGraphics();
g = null;
img = null;
bmpFront = null;
bmpBack = null;
Disconnect(ref job);
}
#endregion
}
else if (SmartCardReaderUtil.Instance.GetDeviceStatus().Contains(EnumDeviceStatus.Connected))
{
#region use card reader
SmartCardData_Original cardData = new SmartCardData_Original()
{
SuperviseeBiodata = cardInfo.SuperviseeBiodata,
DutyOfficerData = cardInfo.DutyOfficerData
};
// write data
bool writeDataResult = SmartCardReaderUtil.Instance.WriteData(cardData);
if (writeDataResult)
{
// get card UID
returnValue.CardUID = SmartCardReaderUtil.Instance.GetCardUID(EnumDeviceNames.SmartCardContactlessReader);
}
#endregion
}
else
{
returnValue.Description = "Smart card printer is not connected!";
}
if (!string.IsNullOrEmpty(returnValue.CardUID))
{
returnValue.Success = true;
}
else if (string.IsNullOrEmpty(returnValue.CardUID) && string.IsNullOrEmpty(returnValue.Description))
{
returnValue.Description = "Smart card type unsupported!";
}
OnCompleted(returnValue);
return(returnValue.Success);
}
catch (Exception ex)
{
Debug.WriteLine("PrintAndWriteSmartcardData exception: " + ex.ToString());
OnCompleted(new PrintAndWriteCardResult()
{
Success = false, Description = "Oops!.. Something went wrong ..."
});
return(false);
}
}
// Builds the front and back side bitmaps
// --------------------------------------------------------------------------------------------------
private bool BuildBitmaps()
{
ZMotifGraphics g = new ZMotifGraphics();
bool builtOk = true;
try
{
// Gets images from files
if (_isZXP7)
{
FrontImage = "ZXP7Front.bmp";
}
else
{
FrontImage = "ZXP8Front.bmp";
}
byte[] imgFront = g.ImageFileToByteArray(_nameFrontImage);
byte[] imgBack = g.ImageFileToByteArray(_nameBackImage);
// Initializes the graphic buffer for the front side
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.Color);
// Draws text and image into the graphic buffer for front side
g.DrawImage(ref imgFront, ZMotifGraphics.ImagePositionEnum.Centered, 1000, 620, 0);
g.DrawTextString(50, 580, "Front Side: Color Image", "Arial", 10,
ZMotifGraphics.FontTypeEnum.Regular, g.IntegerFromColorName("Navy"));
// Creates the front side bitmap
int dataLen;
_bmpFront = g.CreateBitmap(out dataLen);
// Clears the graphics buffer
g.ClearGraphics();
// Initializes the graphic buffer for the back side
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape,
ZMotifGraphics.RibbonTypeEnum.MonoK);
// Draws text an image into the graphic buffer for the back side
g.DrawImage(ref imgBack, ZMotifGraphics.ImagePositionEnum.Centered, 1000, 620, 0);
g.DrawTextString(50, 580, "Back Side Monochrome Image", "Arial", 10,
ZMotifGraphics.FontTypeEnum.Regular, g.IntegerFromColorName("Black"));
// Creates the back side bitmap
_bmpBack = g.CreateBitmap(out dataLen);
g.ClearGraphics();
}
catch
{
builtOk = false;
}
return(builtOk);
}
private bool Print_Label(string printerName, string frontImagePath, string backImagePath, ref string status)
{
bool bRet = true;
byte[] img = null;
byte[] bmpFront = null;
byte[] bmpBack = null;
Job job = null;
ZMotifGraphics g = null;
try
{
// Opens a connection with a ZXP Printer
// if it is in an alarm condition, exit function
// -------------------------------------------------
job = new Job();
g = new ZMotifGraphics();
if (!Connect(printerName, ref job))
{
Debug.WriteLine("Unable to open device [" + printerName + "]\r\n");
return(false);
}
if (_alarm != 0)
{
Debug.WriteLine("Printer is in alarm condition\r\n" + "Error: " + job.Device.GetStatusMessageString(_alarm));
return(false);
}
#region Builds the front side image (color)
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape, ZMotifGraphics.RibbonTypeEnum.Color);
img = g.ImageFileToByteArray(frontImagePath);
g.DrawImage(ref img, ZMotifGraphics.ImagePositionEnum.Centered, 0, 0, 0);
//g.DrawLine(160, 70, 250, 70, g.IntegerFromColor(System.Drawing.Color.Red), 5.0f);
//g.DrawRectangle(300, 20, 100, 100, 5.0f, g.IntegerFromColorName("Green"));
//g.DrawEllipse(450, 20, 100, 100, 5.0f, g.IntegerFromColor(System.Drawing.Color.Blue));
//g.DrawTextString(50.0f, 580.0f, "Print 1: Front Side: Image, Shapes, Text", "Arial", 10.0f,
// ZMotifGraphics.FontTypeEnum.Regular, g.IntegerFromColor(System.Drawing.Color.Navy));
int dataLen;
bmpFront = g.CreateBitmap(out dataLen);
g.ClearGraphics();
#endregion
#region Builds the front side image (color)
g.InitGraphics(0, 0, ZMotifGraphics.ImageOrientationEnum.Landscape, ZMotifGraphics.RibbonTypeEnum.MonoK);
img = g.ImageFileToByteArray(backImagePath);
g.DrawImage(ref img, ZMotifGraphics.ImagePositionEnum.Centered, 0, 0, 0);
//g.DrawImage(ref img, 50.0f, 50.0f, 275, 200, 0);
//g.DrawLine(350, 50, 475, 120, g.IntegerFromColor(System.Drawing.Color.Black), 5.0f);
//g.DrawRectangle(500, 20, 100, 100, 5.0f, g.IntegerFromColorName("Black"));
//g.DrawEllipse(650, 20, 100, 100, 5.0f, g.IntegerFromColor(System.Drawing.Color.Black));
//g.DrawTextString(50.0f, 580.0f, "Print 1: Back Side: Image, Shapes, Text", "Arial", 10.0f,
// ZMotifGraphics.FontTypeEnum.Regular, g.IntegerFromColor(System.Drawing.Color.DarkBlue));
bmpBack = g.CreateBitmap(out dataLen);
g.ClearGraphics();
#endregion
#region Print the images
//if (!_isZXP7)
// job.JobControl.CardType = cardType;
job.JobControl.FeederSource = FeederSourceEnum.CardFeeder;
job.JobControl.Destination = DestinationTypeEnum.Eject;
job.BuildGraphicsLayers(SideEnum.Front, PrintTypeEnum.Color, 0, 0, 0, -1, GraphicTypeEnum.BMP, bmpFront);
job.BuildGraphicsLayers(SideEnum.Back, PrintTypeEnum.MonoK, 0, 0, 0, -1, GraphicTypeEnum.BMP, bmpBack);
//string cardUID = SmartCardPrinterUtils.Instance.GetMifareCardUID(EnumDeviceNames.SmartCardPrinterContactlessReader);
int actionID = 0;
job.PrintGraphicsLayers(1, out actionID);
job.ClearGraphicsLayers();
JobWait(ref job, actionID, 180, out status, out bRet);
#endregion
//return true;
}
catch (Exception ex)
{
//return false;
}
return(bRet);
}