public int Inflate(byte[] bytes, int offset, int length)
{
Debug.Assert(null != bytes, "Can't pass in a null output buffer!");
// If Inflate is called on an invalid or unready inflater, return 0 to indicate no bytes
// have been read
if (NeedsInput() || _inputBufferHandle == null || !_inputBufferHandle.IsAllocated || length == 0)
{
return(0);
}
// State is valid; attempt inflation
try
{
int bytesRead;
ZLibNative.ErrorCode errc = ReadInflateOutput(bytes, offset, length, ZLibNative.FlushCode.NoFlush, out bytesRead);
if (errc == ZLibNative.ErrorCode.StreamEnd)
{
_finished = true;
}
return(bytesRead);
}
finally
{
// Before returning, make sure to release input buffer if necesary:
if (0 == _zlibStream.AvailIn && _inputBufferHandle.IsAllocated)
{
DeallocateInputBufferHandle();
}
}
}
/// <summary>
/// Initializes a new ZLibException with serialized data.
/// </summary>
/// <param name="info">The SerializationInfo that holds the serialized object data about the exception being thrown.</param>
/// <param name="context">The StreamingContext that contains contextual information about the source or destination.</param>
protected ZLibException(SerializationInfo info, StreamingContext context) :
base(info, context)
{
string errContext = info.GetString("zlibErrorContext");
ZLibNative.ErrorCode errCode = (ZLibNative.ErrorCode)info.GetInt32("zlibErrorCode");
string errMessage = info.GetString("zlibErrorMessage");
Init(errContext, errCode, errMessage);
}
/// <summary>
/// Wrapper around the ZLib inflate function, configuring the stream appropriately.
/// </summary>
private unsafe ZLibNative.ErrorCode ReadInflateOutput(IntPtr bufPtr, int length, ZLibNative.FlushCode flushCode, out int bytesRead)
{
lock (_syncLock)
{
_zlibStream.NextOut = bufPtr;
_zlibStream.AvailOut = (uint)length;
ZLibNative.ErrorCode errC = Inflate(flushCode);
bytesRead = length - (int)_zlibStream.AvailOut;
return(errC);
}
}
/// <summary>
/// Throw exception based on ZLib error code
/// </summary>
/// <param name="retVal"></param>
private static void ThrowIfZLibError(ZLibNative.ErrorCode retVal)
{
// switch does not support fall-through
bool invalidOperation = false;
bool corruption = false;
switch (retVal)
{
case ZLibNative.ErrorCode.Ok:
return;
case ZLibNative.ErrorCode.StreamEnd:
invalidOperation = true; break;
case ZLibNative.ErrorCode.NeedDictionary:
corruption = true; break;
case ZLibNative.ErrorCode.StreamError:
corruption = true; break;
case ZLibNative.ErrorCode.DataError:
corruption = true; break;
case ZLibNative.ErrorCode.MemError:
throw new OutOfMemoryException();
case ZLibNative.ErrorCode.BufError:
invalidOperation = true; break;
case ZLibNative.ErrorCode.VersionError:
throw new InvalidOperationException(SR.Get(SRID.ZLibVersionError,
System.Text.Encoding.UTF8.GetString(ZLibVersion, 0, ZLibVersion.Length)));
default:
{
// ErrorNo
throw new IOException();
}
}
if (invalidOperation)
{
throw new InvalidOperationException();
}
if (corruption)
{
throw new FileFormatException(SR.Get(SRID.CorruptStream));
}
}
/// <summary>
/// Translates the given byte array to a GCHandle so that it can be passed to the ZLib
/// Inflate function, then returns the result of that call.
/// </summary>
private unsafe ZLibNative.ErrorCode ReadInflateOutput(byte[] outputBuffer, int offset, int length, ZLibNative.FlushCode flushCode, out int bytesRead)
{
lock (_syncLock)
{
fixed(byte *bufPtr = outputBuffer)
{
_zlibStream.NextOut = (IntPtr)bufPtr + offset;
_zlibStream.AvailOut = (uint)length;
ZLibNative.ErrorCode errC = Inflate(flushCode);
bytesRead = length - (int)_zlibStream.AvailOut;
return(errC);
}
}
}
/// <summary>
/// This is the preferred constructor to use.
/// The other constructors are provided for compliance to Fx design guidelines.
/// </summary>
/// <param name="message">A (localised) human readable error description.</param>
/// <param name="zlibErrorContext">A description of the context within zlib where the error occurred (e.g. the function name).</param>
/// <param name="zlibErrorCode">The error code returned by a ZLib function that caused this exception.</param>
/// <param name="zlibErrorMessage">The string provided by ZLib as error information (unlocalised).</param>
public ZLibException(string?message, string?zlibErrorContext, int zlibErrorCode, string?zlibErrorMessage) : base(message)
{
_zlibErrorContext = zlibErrorContext;
_zlibErrorCode = (ZLibNative.ErrorCode)zlibErrorCode;
_zlibErrorMessage = zlibErrorMessage;
}
//------------------------------------------------------
//
// IDeflateTransform Interface
//
//------------------------------------------------------
/// <summary>
/// Decompress delegate - invoke ZLib in a manner consistent with RMA/Office
/// </summary>
/// <param name="source">stream to read from</param>
/// <param name="sink">stream to write to</param>
public void Decompress(Stream source, Stream sink)
{
if (source == null)
{
throw new ArgumentNullException("source");
}
if (sink == null)
{
throw new ArgumentNullException("sink");
}
Invariant.Assert(source.CanRead);
Invariant.Assert(sink.CanWrite, "Logic Error - Cannot decompress into a read-only stream");
// remember this for later
long storedPosition = -1;
try
{
if (source.CanSeek)
{
storedPosition = source.Position;
source.Position = 0;
}
if (sink.CanSeek)
{
sink.Position = 0;
}
// zlib state
ZLibNative.ZLibStreamHandle zStream;
// initialize the zlib library
ZLibNative.ErrorCode retVal = ZLibNative.CreateZLibStreamForInflate(out zStream, DEFAULT_WINDOW_BITS);
ThrowIfZLibError(retVal);
byte[] sourceBuf = null; // source buffer
byte[] sinkBuf = null; // destination buffer - where to write data
GCHandle gcSourceBuf = new GCHandle(); // Preallocate these so we can safely access them
GCHandle gcSinkBuf = new GCHandle(); // in the next finally block.
try
{
// read all available data
// each block is preceded by a header that is 3 ulongs
int uncompressedSize, compressedSize;
long destStreamLength = 0; // keep track of decompressed size
while (ReadBlockHeader(source, out uncompressedSize, out compressedSize))
{
// ensure we have space
AllocOrRealloc(compressedSize, ref sourceBuf, ref gcSourceBuf);
AllocOrRealloc(uncompressedSize, ref sinkBuf, ref gcSinkBuf);
// read the data into the sourceBuf
int bytesRead = PackagingUtilities.ReliableRead(source, sourceBuf, 0, compressedSize);
if (bytesRead > 0)
{
if (compressedSize != bytesRead)
{
throw new FileFormatException(SR.Get(SRID.CorruptStream));
}
// prepare structure
// The buffer pointers must be reset for every call
// because ZLibNative.Inflate modifies them
zStream.NextIn = gcSourceBuf.AddrOfPinnedObject();
zStream.NextOut = gcSinkBuf.AddrOfPinnedObject();
zStream.AvailIn = (uint)bytesRead; // this is number of bytes available for decompression at pInBuf and is updated by ums_deflate call
zStream.AvailOut = (uint)sinkBuf.Length; // this is the number of bytes free in pOutBuf and is updated by ums_deflate call
// InvokeZLib does the actual interop. It updates zStream, and sinkBuf (sourceBuf passed by ref to avoid copying)
// and leaves the decompressed data in sinkBuf.
// int decompressedSize = InvokeZLib(bytesRead, ref zStream, ref sourceBuf, ref sinkBuf, pSource, pSink, false);
retVal = zStream.Inflate(ZLibNative.FlushCode.SyncFlush);
ThrowIfZLibError(retVal);
checked
{
int decompressedSize = sinkBuf.Length - (int)zStream.AvailOut;
// verify that data matches header
if (decompressedSize != uncompressedSize)
{
throw new FileFormatException(SR.Get(SRID.CorruptStream));
}
destStreamLength += decompressedSize;
// write to the base stream
sink.Write(sinkBuf, 0, decompressedSize);
}
}
else
{
// block header but no block data
if (compressedSize != 0)
{
throw new FileFormatException(SR.Get(SRID.CorruptStream));
}
}
}
// make sure we truncate if the destination stream was longer than this current decompress
if (sink.CanSeek)
{
sink.SetLength(destStreamLength);
}
}
finally
{
if (gcSourceBuf.IsAllocated)
{
gcSourceBuf.Free();
}
if (gcSinkBuf.IsAllocated)
{
gcSinkBuf.Free();
}
}
}
finally
{
// seek to the current logical position before returning
if (source.CanSeek)
{
source.Position = storedPosition;
}
}
}
/// <summary>
/// Compress delegate - invoke ZLib in a manner consistent with RMA/Office
/// </summary>
/// <param name="source"></param>
/// <param name="sink"></param>
/// <remarks>We are careful to avoid use of Position, Length or SetLength on non-seekable streams. If
/// source or sink are non-seekable, it is assumed that positions are correctly set upon entry and that
/// they need not be restored. We also assume that destination stream length need not be truncated.</remarks>
public void Compress(Stream source, Stream sink)
{
if (source == null)
{
throw new ArgumentNullException("source");
}
if (sink == null)
{
throw new ArgumentNullException("sink");
}
Invariant.Assert(source.CanRead);
Invariant.Assert(sink.CanWrite, "Logic Error - Cannot compress into a read-only stream");
// remember this for later if possible
long storedPosition = -1; // default to illegal value to catch any logic errors
try
{
int sourceBufferSize; // don't allocate 4k for really tiny source streams
if (source.CanSeek)
{
storedPosition = source.Position;
source.Position = 0;
// Casting result to int is safe because _defaultBlockSize is very small and the result
// of Math.Min(x, _defaultBlockSize) must be no larger than _defaultBlockSize.
sourceBufferSize = (int)(Math.Min(source.Length, (long)_defaultBlockSize));
}
else
{
sourceBufferSize = _defaultBlockSize; // can't call Length so fallback to default
}
if (sink.CanSeek)
{
sink.Position = 0;
}
// zlib state
ZLibNative.ZLibStreamHandle zStream;
// initialize the zlib library
ZLibNative.ErrorCode retVal = ZLibNative.CreateZLibStreamForDeflate(
out zStream,
ZLibNative.CompressionLevel.DefaultCompression,
DEFAULT_WINDOW_BITS,
DEFAULT_MEM_LEVEL,
ZLibNative.CompressionStrategy.DefaultStrategy);
ThrowIfZLibError(retVal);
// where to write data - can actually grow if data is uncompressible
long destStreamLength = 0;
byte[] sourceBuf = null; // source buffer
byte[] sinkBuf = null; // destination buffer
GCHandle gcSourceBuf = new GCHandle();
GCHandle gcSinkBuf = new GCHandle();
try
{
// allocate managed buffers
AllocOrRealloc(sourceBufferSize, ref sourceBuf, ref gcSourceBuf);
AllocOrRealloc(_defaultBlockSize + (_defaultBlockSize >> 1), ref sinkBuf, ref gcSinkBuf);
// while (more data is available)
// - read into the sourceBuf
// - compress into the sinkBuf
// - emit the header
// - write out to the _baseStream
// Suppress 6518 Local IDisposable object not disposed:
// Reason: The stream is not owned by us, therefore we cannot
// close the BinaryWriter as it will Close the stream underneath.
#pragma warning disable 6518
BinaryWriter writer = new BinaryWriter(sink);
int bytesRead;
while ((bytesRead = PackagingUtilities.ReliableRead(source, sourceBuf, 0, sourceBuf.Length)) > 0)
{
Invariant.Assert(bytesRead <= sourceBufferSize);
// prepare structure
// these pointers must be re-assigned for each loop because
// ums_deflate modifies them
zStream.NextIn = gcSourceBuf.AddrOfPinnedObject();
zStream.NextOut = gcSinkBuf.AddrOfPinnedObject();
zStream.AvailIn = (uint)bytesRead; // this is number of bytes available for compression at pInBuf and is updated by ums_deflate call
zStream.AvailOut = (uint)sinkBuf.Length; // this is the number of bytes free in pOutBuf and is updated by ums_deflate call
// cast is safe because SyncFlush is a constant
retVal = zStream.Deflate(ZLibNative.FlushCode.SyncFlush);
ThrowIfZLibError(retVal);
checked
{
int compressedSize = sinkBuf.Length - (int)zStream.AvailOut;
Invariant.Assert(compressedSize > 0, "compressing non-zero bytes creates a non-empty block");
// This should never happen because our destination buffer
// is twice as large as our source buffer
Invariant.Assert(zStream.AvailIn == 0, "Expecting all data to be compressed!");
// write the header
writer.Write(_blockHeaderToken); // token
writer.Write((UInt32)bytesRead);
writer.Write((UInt32)compressedSize);
destStreamLength += _headerBuf.Length;
// write to the base stream
sink.Write(sinkBuf, 0, compressedSize);
destStreamLength += compressedSize;
}
}
// post-compression
// truncate if necessary
if (sink.CanSeek)
{
sink.SetLength(destStreamLength);
}
}
finally
{
if (gcSourceBuf.IsAllocated)
{
gcSourceBuf.Free();
}
if (gcSinkBuf.IsAllocated)
{
gcSinkBuf.Free();
}
}
#pragma warning restore 6518
}
finally
{
// seek to the current logical position before returning
if (sink.CanSeek)
{
source.Position = storedPosition;
}
}
}
