// Make Full Pass Through Processing.
public int Run(int pass = 0, bool logBeat = false)
{
int rc = 0;
bool initiatorStatus = getDictionaryEntry("ProcessJobs", "Y").Equals("Y");
// Validate Connection.
if (validateConnection(MasterConnection))
{
switch (pass)
{
// Pass 1: Evaluate current run states.
// Review Active Jobs.
case 1:
//myLog.WriteEntry("Starting Pass 0");
if (CheckStatus() >= 0)
//Initialize();
//if (bInitialized)
{
// Inspect each running job.
//XLogger(1200, 0, string.Format("Jobs Executing={0}; Allowed={1}", runningJobs.Count, jobsAllowed));
foreach (XTRMJob thisJob in runningJobs)
{
//rc = thisJob.Initialize(thisJob.jobSerial);
//if (rc >= 0)
//{
if (thisJob.jobStatus == 1)
{
int lActiveTasks = 0;
// Inspect each running task (should be one at most).
foreach (XTRMTask thisTask in thisJob.tasks)
{
// Refresh Task.
//rc = thisTask.Initialize(thisTask.taskSerial);
//if (rc >= 0)
//{
/*
* if (thisTask.taskStatus > 9)
* {
* // Done.
* // Start next one if no other active tasks.
* //thisJob.tasks.Remove(thisTask);
* }
*/
if (thisTask.taskStatus == 1)
{
lActiveTasks++;
if (false)
{
// If not original task object, then let's check closer.
// This can happen if XExecutive gets re-initialized with running jobs.
if (!thisTask.taskOriginator)
{
if (thisTask.taskPID != -1)
{
// Future, Check the [time]-limit?
// Check the PID; If exists, then wait.
try
{
Process thisProcess = Process.GetProcessById(thisTask.taskPID);
if (thisProcess.HasExited)
{
thisTask.taskStatus = 95; // Complete; disposition unknown.
rc = thisTask.Save();
}
}
catch (Exception ex)
{
// Mark the task as complete.
thisTask.taskStatus = 91; // Complete; disposition unknown.
rc = thisTask.Save();
}
}
}
}
}
else
{
// Other status values ignored (for now) - should not be pending!
//XLogger(1201, 0, string.Format("Unexpected TaskStatus Value={0}", thisTask.taskStatus));
// If result < 0, then mark job for termination!
if (thisTask.taskResult < 0)
{
XLogger(1201, 0, string.Format("Job #{0} Terminated Due to Task #{1} Result={2}.", thisJob.jobSerial, thisTask.taskSerial, thisTask.taskResult));
thisJob.jobStatus = 98; // Terminated.
thisJob.jobStop = DateTime.Now.ToString();
lActiveTasks = 1;
rc = thisJob.Save();
if (rc < 0)
{
XLogger(1227, 0, string.Format("thisJob.Save() Failed; rc={0}", rc));
}
// Send email to XBot Admin.
string contact = XTRMObject.getDictionaryEntry("AdminMail", "*****@*****.**");
Notify(contact, null, string.Format("Job #{0}/{1} Failed {2}", thisJob.jobSerial, thisTask.taskSerial, thisJob.jobName), string.Format("Exec={0}; Path={1}; Result={2}.", thisTask.taskExecutable, thisTask.taskPath, thisTask.taskResult));
}
}
//}
//else
//{
// Error on Initialize() of XTask.
// XLogger(1202, 0, string.Format("XTask.Initialize() Failure; rc={0}", rc));
//}
}
//if (thisJob.tasks.Count == 0)
if (lActiveTasks == 0)
{
// Look for next task (within this job).
List <int> pendingTaskSerials = InventoryPendingTasks(thisJob);
if (pendingTaskSerials.Count <= 0)
{
// Job Complete
thisJob.jobStatus = 99;
thisJob.jobStop = DateTime.Now.ToString();
rc = thisJob.Save();
if (rc < 0)
{
XLogger(1203, 0, string.Format("thisJob.Save() Failed; rc={0}", rc));
}
//runningJobs.Remove(thisJob);
}
else
{
XTRMTask pendingTask = new XTRMTask(false);
if (pendingTaskSerials[0] < 1)
{
// Error
XLogger(1204, 0, "No Pending TaskSerials");
}
rc = pendingTask.Initialize(pendingTaskSerials[0]);
if (rc >= 0)
{
//thisJob.tasks.Add(pendingTask);
//runningTasks.Add(pendingTask);
rc = pendingTask.Start();
if (rc < 0)
{
XLogger(1205, 0, string.Format("pendingTask.Start() Failed; Serial={0}; rc={1}", pendingTask.taskSerial, rc));
// Send email to XBot Admin.
string contact = XTRMObject.getDictionaryEntry("AdminMail", "*****@*****.**");
Notify(contact, null, string.Format("Job Task #{0}/{1} {2} Could Not Start", thisJob.jobSerial, pendingTask.taskSerial, pendingTask.taskName), string.Format("Exec={0}; Path={1}.", pendingTask.taskExecutable, pendingTask.taskPath));
}
else
{
XLogger(1206, 0, string.Format("Task #{0} Started", pendingTask.taskSerial));
}
//thisJob.tasks.Add(pendingTask);
}
else
{
// Error
XLogger(1207, 0, string.Format("XTask.Initialize() Failure for Pending Task; rc={0}", rc));
}
}
}
else
{
// Wait for other pending task(s) - should not happen!
//XLogger(1208, 0, "Waiting for Job Task(s) to Complete.");
}
//}
//else
//{
// Error on Initialize() of XJob.
// XLogger(1209, 0, string.Format("XJob.Initialize() Failure; rc={0}", rc));
//}
}
}
// Purge Jobs that have completed! jobStatus >= 9
bool purgeFlag = true;
while (purgeFlag)
{
purgeFlag = false;
foreach (XTRMJob thisJob in runningJobs)
{
if (thisJob.jobStatus >= 9)
{
runningJobs.Remove(thisJob);
purgeFlag = true;
break;
}
}
}
}
else
{
// Error!
XLogger(1210, 0, "Executive Not Initialized in Pass 0");
}
break;
// Pass 0: Start New Jobs.
// Review Pending Jobs.
// Spawn Candidate Jobs.
case 0:
if (initiatorStatus)
{
//myLog.WriteEntry("Starting Pass 1");
// If we are under the MPR, then start a new job.
if (runningJobs.Count < jobsAllowed)
{
rc = LoadCandidateJobs();
if (rc >= 0)
{
foreach (int thisJobSerial in candidateJobs)
{
// Mark the Job as Started.
XTRMJob newJob = new XTRMJob(false);
if (runningJobs.Count < jobsAllowed)
{
rc = newJob.Initialize(thisJobSerial);
if (rc >= 0)
{
newJob.jobStatus = 1;
newJob.jobStart = DateTime.Now.ToString();
//newJob.jobStop = DBNull.Value.ToString();
rc = newJob.Save();
if (rc >= 0)
{
// Job Started; first task will start in next call to case 0:
runningJobs.Add(newJob);
XLogger(1222, 0, string.Format("Job #{0} Started; Executing={1}; Allowed={2}", newJob.jobSerial, runningJobs.Count, jobsAllowed));
}
else
{
// Error
XLogger(1211, 0, string.Format("newJob.Save() Failure; rc={0}", rc));
}
}
else
{
// Initialize Error (XJob).
XLogger(1212, 0, string.Format("newJob.Initialize() Failure; rc = {0}", rc));
}
}
else
{
XLogger(1213, 0, "Waiting for Runnng Jobs To Complete");
break;
}
}
}
else
{
// Error
XLogger(1214, 0, string.Format("Failure in LoadCandidateJobs(); rc={0}", rc));
}
}
else
{
//XLogger(1215, 0, "Waiting for Capacity");
// Wait for capacity.
}
}
break;
}
}
else
{
myLog.WriteEntry("Master XDB Connection Failure");
}
return(rc);
}
public int CreateJob(XTRMJob thisJob, XTRMEvent thisEvent, Dictionary <string, string> dynConfig = null)
{
int rc = 0;
int jobSerial = -1;
int taskSerial = -1;
XTRMJob newJob = new XTRMJob();
XTRMTask newTask = new XTRMTask();
newJob.Initialize(-1);
newJob.jobType = thisJob.jobType;
newJob.jobEvent = thisEvent.eventSerial;
newJob.jobSequence = 0;
newJob.jobLimit = -1;
newJob.jobDisplay = "TEST";
//newJob.jobName = thisJob.jobName + " - " + thisEvent.eventParm1;
newJob.jobName = ResolveParm(thisJob.jobName, thisEvent, thisJob.config, taskSerial) + " - " + thisEvent.eventParm1;
newJob.jobStatus = -99;
newJob.jobResult = 0;
jobSerial = newJob.Save();
if (jobSerial >= 0)
{
XLogger(1128, 0, string.Format("Created Job Serial={0}; Name={1}", jobSerial, newJob.jobName));
// Write job config to WorkJobData!
try
{
foreach (KeyValuePair <string, string> kvp in thisJob.config)
{
saveJobData(jobSerial, kvp.Key.ToString().ToUpper(), kvp.Value);
}
if (dynConfig != null)
{
foreach (KeyValuePair <string, string> kvp in dynConfig)
{
saveJobData(jobSerial, kvp.Key.ToString().ToUpper(), kvp.Value);
}
}
}
catch (Exception ex)
{
XLogger(1157, -1, string.Format("Saving Job Data; Message={0}", ex.Message));
}
int position = 0;
foreach (XTRMTask thisTask in thisJob.tasks)
{
rc = newTask.Initialize(-1);
newTask.jobSerial = jobSerial;
newTask.taskSerial = -1;
newTask.taskSequence = position++;
//newTask.taskName = thisTask.taskName;
newTask.taskName = ResolveParm(thisTask.taskName, thisEvent, thisTask.config, taskSerial);
newTask.taskPath = ResolveParm(thisTask.taskPath, thisEvent, thisTask.config, taskSerial);
//newTask.taskExecutable = thisTask.taskExecutable;
newTask.taskExecutable = ResolveParm(thisTask.taskExecutable, thisEvent, thisTask.config, taskSerial);
newTask.taskPID = -1;
newTask.taskStatus = 0;
newTask.taskResult = 0;
newTask.taskEvent = thisEvent.eventSerial;
//newTask.taskStart = DateTime.Now;
//newTask.taskStop = DateTime.Now;
taskSerial = newTask.Save();
if (taskSerial >= 0)
{
// Must do Parameters!
// Need to resolve {{x}} parms!
if (thisTask.parms != null)
{
newTask.parms.Add(newTask.taskName);
foreach (string thisParm in thisTask.parms)
{
//string resolvedParm = ResolveParm(thisParm, thisEvent, thisTask.config);
newTask.parms.Add(ResolveParm(thisParm, thisEvent, thisTask.config, taskSerial, jobSerial));
}
}
//newTask.taskStart = DateTime.Now;
//newTask.taskStop = DateTime.Now;
taskSerial = newTask.Save();
if (taskSerial >= 0)
{
XLogger(1125, 0, string.Format("Created Task Serial={0}; Name={1}; Path={2}", taskSerial, newTask.taskName, newTask.taskPath));
}
else
{
XLogger(1126, -1, string.Format("Unable To Create Task; rc={0}", taskSerial));
}
}
else
{
XLogger(1155, -1, string.Format("Unable To Create Task; rc={0}", taskSerial));
}
}
newJob.jobStatus = 0; // Activate Job!
jobSerial = newJob.Save();
if (jobSerial < 0)
{
XLogger(1156, -1, string.Format("Unable To Activate (save) Job; rc={0}", jobSerial));
}
}
else
{
XLogger(1127, -1, string.Format("Unable To Create Job; rc={0}", jobSerial));
}
return(rc);
}
public override int Initialize(int lSerial = -1)
{
int rc = 0;
Clear();
if (pState >= 0) // ONLY if we are using XDB!
{
// Check the Connection.
if (MasterConnection != null)
{
if (MasterConnection.State != System.Data.ConnectionState.Open)
{
try
{
MasterConnection.Open();
}
catch (SqlException ex)
{
XLogger(2300, ex.ErrorCode, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
rc = ex.ErrorCode;
}
catch (Exception ex)
{
XLogger(2301, -1, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
rc = -1;
}
}
if (MasterConnection.State == System.Data.ConnectionState.Open)
{
try
{
myAdapter = new SqlDataAdapter();
// Try to get the Serial (if >= 0).
string strTemp = "select * ";
strTemp += " from WorkJobs a";
strTemp += " where a.Job_Serial = {0}";
String strSelectCommand = String.Format(strTemp, lSerial);
myJobs.Clear();
myCommandBuilder = new SqlCommandBuilder(myAdapter);
myAdapter.SelectCommand = new SqlCommand(strSelectCommand, MasterConnection);
pState = myAdapter.Fill(myJobs);
// add handlers
myAdapter.RowUpdating += new SqlRowUpdatingEventHandler(OnRowUpdating);
myAdapter.RowUpdated += new SqlRowUpdatedEventHandler(OnRowUpdated);
myAdapter.InsertCommand = myCommandBuilder.GetInsertCommand().Clone();
myAdapter.InsertCommand.UpdatedRowSource = UpdateRowSource.Both;
myAdapter.UpdateCommand = myCommandBuilder.GetUpdateCommand().Clone();
myAdapter.DeleteCommand = myCommandBuilder.GetDeleteCommand().Clone();
//myAdapter.InsertCommand.CommandText = String.Concat(myAdapter.InsertCommand.CommandText,
// "; SELECT MyTableID=SCOPE_IDENTITY()");
string insertSuffix = "; SELECT Job_Serial=SCOPE_IDENTITY()";
myAdapter.InsertCommand.CommandText += insertSuffix;
myAdapter.MissingSchemaAction = MissingSchemaAction.AddWithKey;
//SqlParameter[] aParams = new SqlParameter[myCommandBuilder.GetInsertCommand().Parameters.Count];
//myCommandBuilder.GetInsertCommand().Parameters.CopyTo(aParams, 0);
//myCommandBuilder.GetInsertCommand().Parameters.Clear();
SqlParameter identParam = new SqlParameter("@id", SqlDbType.BigInt, 0, "Job_Serial");
identParam.Direction = ParameterDirection.Output;
myAdapter.InsertCommand.Parameters.Add(identParam);
string test = myAdapter.InsertCommand.Parameters["@id"].ToString();
myAdapter.InsertCommand.UpdatedRowSource = UpdateRowSource.FirstReturnedRecord;
}
catch (SqlException ex)
{
XLogger(2302, ex.ErrorCode, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
rc = ex.ErrorCode;
}
catch (Exception ex)
{
XLogger(2303, -1, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
rc = -1;
}
}
else
{
rc = -1;
pState = -1;
XLogger(2304, 0, string.Format("Connection Unable to be Opened"));
}
}
else
{
rc = -1;
pState = -1;
XLogger(2305, 0, string.Format("No Connection Available"));
}
try
{
theseJobs = myJobs.Select();
if (theseJobs.Length > 0)
{
// Clear Member Values!
Clear();
jobSerial = (int)theseJobs[0]["Job_Serial"];
rc = jobSerial;
jobHost = (string)theseJobs[0]["Job_Host"];
jobName = (string)theseJobs[0]["Job_Name"];
jobType = (int)theseJobs[0]["Job_Type"];
if (!DBNull.Value.Equals(theseJobs[0]["Job_Start"]))
{
jobStart = (string)theseJobs[0]["Job_Start"].ToString();
}
if (!DBNull.Value.Equals(theseJobs[0]["Job_Stop"]))
{
jobStop = (string)theseJobs[0]["Job_Stop"].ToString();
}
jobSequence = (int)theseJobs[0]["Job_Sequence"];
jobStatus = (int)theseJobs[0]["Job_Status"];
jobResult = (int)theseJobs[0]["Job_Result"];
jobPriority = (int)theseJobs[0]["Job_Priority"];
jobLimit = (int)theseJobs[0]["Job_Limit"];
if (!DBNull.Value.Equals(theseJobs[0]["Job_Display"]))
{
jobDisplay = (string)theseJobs[0]["Job_Display"];
}
jobRetention = (int)theseJobs[0]["Job_Retention"];
jobEvent = (int)theseJobs[0]["Job_Event"];
changeUser = (string)theseJobs[0]["Change_User"];
changeDate = (string)theseJobs[0]["Change_Date"].ToString();
// NEED TO ADD THESE!
//if (!DBNull.Value.Equals(theseComponents[0]["Change_Tag"]))
//{
// changeTag = (string)theseComponents[0]["Change_Tag"];
//}
//if (!DBNull.Value.Equals(theseComponents[0]["Change_State"]))
//{
// changeState = (int)theseComponents[0]["Change_State"];
//}
XTRMTask thisTask = new XTRMTask(false);
//int taskRC = thisTask.Initialize(jobSerial, "select * from WorkTasks a where a.Job_Serial = {0} and Task_Status >= 1 order by Task_Status desc");
int taskRC = thisTask.Initialize(jobSerial, "select * from WorkTasks a where a.Job_Serial = {0} and Task_Status >= 1 order by Task_Result asc");
if (taskRC > 0)
{
tasks.Add(thisTask);
}
}
}
catch (SqlException ex)
{
rc = ex.ErrorCode;
XLogger(2306, ex.ErrorCode, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
}
catch (Exception ex)
{
rc = -1;
XLogger(2307, -1, string.Format("Serial={0}; Message={1}", lSerial, ex.Message));
}
}
return(rc);
}