public Wall(int x, int y, WallType wallType)
{
this.x = x;
this.y = y;
if(wallType == WallType.Brick)
{
spriteWidth = 20;
spriteHeight = 20;
offset = 2;
}
else
{
spriteWidth = 40;
spriteHeight = 40;
isDestroyable = false;
}
sourceRect = new Rectangle(spriteWidth * 16 * offset, spriteHeight, spriteWidth, spriteHeight);
rectangle = new Rectangle(x, y, spriteWidth, spriteHeight); //needed for collision updates
isStatic = true;
}
public override void Deserialize(IntVector3 position, SerializedObject serializedObject)
{
this.Type = (WallType) serializedObject.Properties[0];
this.rotation = (Rotation) serializedObject.Properties[1];
SpawnWall(this.Type, position, this.rotation);
}
public WallUnit(World world, int x, int y, WallType wallType)
: base(world, WorldLaw.DefaultUnitCreationSpeed,
WorldLaw.DefaultEnemyLifeCount)
{
WallUnitType = wallType;
SetLocation(x, y);
}
public WallUnit(World world, Point point, WallType wallType)
: base(world, WorldLaw.DefaultUnitCreationSpeed,
WorldLaw.DefaultEnemyLifeCount)
{
WallUnitType = wallType;
SetLocation(point.X, point.Y);
}
/// <summary>
/// Initializes a new instance of the <see cref="Wall"/> class.
/// </summary>
/// <param name="width">The width.</param>
/// <param name="height">The height.</param>
/// <param name="color">The color.</param>
/// <param name="wallTypeEnum">Type of the wall.</param>
public Wall(int width, int height, Color color, WallType.WallTypeEnum wallTypeEnum)
{
Height = height;
Width = width;
WallColor = color;
WallType = wallTypeEnum;
}
void ChangeWallInDirection(Facing direction, WallType newType)
{
GrabTilesFromSelection();
string prefabPath = "";
Wall newWall = null;
switch(newType) {
case WallType.Basic:
prefabPath = "Assets/Prefabs/Walls/Basic Wall.prefab";
break;
case WallType.Laser:
prefabPath = "Assets/Prefabs/Walls/Laser Wall.prefab";
break;
default:
Debug.Log("No path for replacement prefab!");
break;
}
var prefab = Resources.LoadAssetAtPath(prefabPath, typeof(Wall));
if (null == prefab) {
Debug.Log("Replacement prefab not found!");
return;
}
foreach (Tile tile in selectedTiles) {
Wall wallToChange = tile.adjacentWalls[(int)direction];
if (null == wallToChange) {
Debug.Log("Wall doesn't exist in that direction!");
continue;
}
if (wallToChange.wallType == newType) {
Debug.Log("Existing wall is already this type.");
continue;
}
newWall = (Wall)GameObject.Instantiate(prefab, wallToChange.transform.position, wallToChange.transform.rotation);
newWall.transform.parent = wallToChange.transform.parent;
newWall.facing = wallToChange.facing;
newWall.adjacentTiles = wallToChange.adjacentTiles;
newWall.Setup();
TileVisualizer.instance.SetVisualizationForWall(newWall);
foreach (Tile adjTile in wallToChange.adjacentTiles) {
if (adjTile.adjacentWalls[(int)direction] == wallToChange) {
adjTile.adjacentWalls[(int)direction] = newWall;
}
if (adjTile.adjacentWalls[(int)Utils.UTurnFacing(direction)] == wallToChange) {
adjTile.adjacentWalls[(int)Utils.UTurnFacing(direction)] = newWall;
}
}
DestroyImmediate(wallToChange.gameObject);
}
}
public LabyrinthUnit(Game game, int posX, int posY, int indexX, int indexY, WallType wallType)
: base(game)
{
Wall = wallType;
TopLeftPosition = new Vector2(posX, posY);
_topRightPosition = new Vector2(posX + Length, posY);
_bottomLeftPosition = new Vector2(posX, posY + Length);
SetCurrentPosition();
_indexX = indexX;
_indexY = indexY;
}
/// <summary>
/// Another constructor for the WallTile.
/// Chooses random decorations for the wall.
/// </summary>
/// <param name="parent"></param>
/// <param name="r">A random used to choose the deco.</param>
public WallTile(object parent, Random r)
: base(parent)
{
if (r.Next(100) > 80)
{
_type = Backend.WallType.Deco1;
}
if (r.Next(100) > 80)
{
_type = Backend.WallType.Deco3;
}
if (r.Next(100) > 80)
{
_type = Backend.WallType.Deco2;
}
}
public Wall(Vertices vertices, WallType type, PlayWindow playWindow)
{
_playWindow = playWindow;
_thickness = 100.0f;
Vertices wallVertices = SimplifyTools.CollinearSimplify(vertices);
_body = BodyFactory.CreateLoopShape(_playWindow.World, VerticesToSimUnits(wallVertices));
_body.CollisionCategories = Category.All;
_body.CollidesWith = Category.All;
_basicEffect = new BasicEffect(_playWindow.GraphicsDevice);
_basicEffect.TextureEnabled = true;
_basicEffect.Texture = _wallTexture;
InitDrawVertices(wallVertices, type);
}
public Block(Block b)
{
id = b.id;
color = b.color;
edges = new List<Edge>();
behaviors = new List<Behavior>();
scales = b.scales;
depth = b.depth;
type = b.type;
foreach (Edge e in b.edges)
{
edges.Add(new Edge(e));
}
foreach (Behavior be in b.behaviors)
{
behaviors.Add(new Behavior(be));
}
}
public Door(Vector2 position, World world, float width, float height, float density, WallType type, Direction d)
: base(position, world, width, height, density, type, d)
{
this.type = type;
textureString = "solitudeWallDoor";
if (type == WallType.Grip)
{
textureString = "solitudeGripDoor";
}
direction = d;
switch (d)
{
case Direction.Up: body.Rotation = (float)(3 * Math.PI / 2); break;
case Direction.Down: body.Rotation = (float)(Math.PI / 2); break;
case Direction.Left: body.Rotation = (float)Math.PI; break;
case Direction.Right: body.Rotation = 0; break;
}
//body.Rotation = (float)((int)d * (Math.PI / 2));
}
public static void FillNode(TreeNode nd, WallType Type, dsWall dsWall, int ID)
{
switch (Type)
{
case WallType.Wall:
nd.Tag = new Wall(dsWall, ID);
break;
case WallType.Arc:
nd.Tag = new WallArc(dsWall, ID);
break;
case WallType.Line:
nd.Tag = new WallLine(dsWall, ID);
break;
case WallType.Corner:
nd.Tag = new WallCorner(dsWall, ID);
break;
}
nd.Text = (nd.Tag as WallSection).FullName;
nd.ImageKey = (nd.Tag as WallSection).Type.ToString();
nd.SelectedImageKey = (nd.Tag as WallSection).Type.ToString();
}
public static GameObject GetWall(WallType type)
{
switch (type) {
case WallType.OneByZero:
return GameObject.Instantiate(GameManager.Instance.wallSmallPrefab, Vector3.zero, Quaternion.identity) as GameObject;
case WallType.TwoByOne:
return GameObject.Instantiate(GameManager.Instance.wallLargePrefab, Vector3.zero, TWO_BY_ONE_QUAT) as GameObject;
case WallType.OneByOne:
return GameObject.Instantiate(GameManager.Instance.wallMediumPrefab, Vector3.zero, ONE_BY_ONE_QUAT) as GameObject;
case WallType.OneByTwo:
return GameObject.Instantiate(GameManager.Instance.wallLargePrefab, Vector3.zero, ONE_BY_TWO_QUAT) as GameObject;
case WallType.ZeroByOne:
return GameObject.Instantiate(GameManager.Instance.wallSmallPrefab, Vector3.zero, ZERO_BY_ONE_QUAT) as GameObject;
case WallType.OneByTwoFlipped:
return GameObject.Instantiate(GameManager.Instance.wallLargePrefab, Vector3.zero, ONE_BY_TWO_FLIPPED_QUAT) as GameObject;
case WallType.OneByOneFlipped:
return GameObject.Instantiate(GameManager.Instance.wallMediumPrefab, Vector3.zero, ONE_BY_ONE_FLIPPED_QUAT) as GameObject;
case WallType.TwoByOneFlipped:
return GameObject.Instantiate(GameManager.Instance.wallLargePrefab, Vector3.zero, TWO_BY_ONE_FLIPPED_QUAT) as GameObject;
default:
return null;
break;
}
}
public Wall(Vector2 position, World world, float width, float height, float density, WallType t, Direction d)
: base(position, world, width, height)
{
body.Rotation = 0;
if (d == Direction.Up || d == Direction.Down) // Up or down
{
body.Rotation = (float)Math.PI / 2;
}
body.BodyType = BodyType.Static;
//world.AddBody(body);
fixture = FixtureFactory.CreateRectangle(width, height, density, Vector2.Zero, body, null);
fixture.OnCollision += new OnCollisionEventHandler(OnCollision);
type = t;
this.width = width;
this.height = height;
drawRectangle = new Rectangle(0, 0, (int)width, (int)height);
switch (type){
case WallType.Smooth:
textureString = /*TextureStatic.Get(*/"solitudeWallSmooth"; break;
case WallType.HandHold:
textureString = /*TextureStatic.Get(*/"solitudeWallHandHold"; break;
case WallType.Grip:
textureString = /*TextureStatic.Get(*/"solitudeWallGrip"; break;
case WallType.Metal:
textureString = /*TextureStatic.Get(*/"solitudeWallMetal"; break;
case WallType.Hot:
textureString = /*TextureStatic.Get(*/"solitudeWallHot"; break;
case WallType.Cold:
textureString = /*TextureStatic.Get(*/"solitudeWallCold"; break;
case WallType.Spike:
textureString = /*TextureStatic.Get(*/"solitudeWallSpike"; break;
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
// Path of file
string filePath = null;
// Using Windows form to get file path
using (Data form = new Data())
{
OpenFileDialog browserDialog = new OpenFileDialog();
browserDialog.ShowDialog();
if (browserDialog.FileName != null)
{
filePath = browserDialog.FileName;
}
else
{
return(Result.Cancelled);
}
}
// Get Dxf document
DxfDocument document = DxfDocument.Load(filePath);
// Get Revit UI document
UIDocument uIDocument = commandData.Application.ActiveUIDocument;
// Get Revit document
Document rvtDocument = uIDocument.Document;
//Get Level of revit file
List <Level> levels = new FilteredElementCollector(rvtDocument)
.OfCategory(BuiltInCategory.OST_Levels)
.WhereElementIsNotElementType().Cast <Level>().ToList();
// Get Wall Type
var wallType = new FilteredElementCollector(rvtDocument)
.OfCategory(BuiltInCategory.OST_Walls)
.WhereElementIsElementType()
.Cast <WallType>()
.FirstOrDefault();
// Get Layers of dxf file
List <Layer> layers = document.Layers.ToList();
// Declear variables
string base_level_name = null;
string top_level_name = null;
string column_layer = null;
string wall_layer = null;
string floor_layer = null;
// Get Data from user by form
using (Data form = new Data())
{
// Set dxf layers to comboBoxs
form.ComboBox_wall_layer.Items.AddRange(layers.Select(layer => (object)layer).ToArray());
form.ComboBox_col_layer.Items.AddRange(layers.Select(layer => (object)layer).ToArray());
form.ComboBox_floor_layer.Items.AddRange(layers.Select(layer => (object)layer).ToArray());
// Set levels to ComboBoxs
form.ComboBox_base_level.Items.AddRange(levels.Select(l => (object)l.Name).ToArray());
form.ComboBox_top_level.Items.AddRange(levels.Select(l => (object)l.Name).ToArray());
form.ShowDialog();
if (form.DialogResult == System.Windows.Forms.DialogResult.Cancel)
{
return(Result.Cancelled);
}
else if (form.Button_ok.DialogResult == System.Windows.Forms.DialogResult.OK)
{
//Get Data from ComboBoxs
base_level_name = form.ComboBox_base_level.SelectedItem.ToString();
top_level_name = form.ComboBox_top_level.SelectedItem.ToString();
wall_layer = form.ComboBox_wall_layer.SelectedItem.ToString();
column_layer = form.ComboBox_col_layer.SelectedItem.ToString();
floor_layer = form.ComboBox_floor_layer.SelectedItem.ToString();
}
}
// Get Data of vertix and its layer by sending document and layers
Dxf_Vertices vertices = new Dxf_Vertices(document, column_layer, wall_layer, floor_layer);
// Get Column Vertix
Dxf_Column columns = new Dxf_Column(vertices);
// Get Walls Vertix
Dxf_Wall walls = new Dxf_Wall(vertices);
// Get Floor Vertix
Dxf_Floor floor = new Dxf_Floor(vertices);
RVT_Col rVT_Col = new RVT_Col(columns.Points);
RVT_Wall rVT_Wall = new RVT_Wall(walls.Walls_center);
RVT_Floor rVT_Floor = new RVT_Floor(floor.Floor_boundary);
Level base_level = GetLEVEL(rvtDocument, base_level_name);
Level top_level = GetLEVEL(rvtDocument, top_level_name);
FamilySymbol symbol;
using (Transaction t = new Transaction(rvtDocument, "Load"))
{
t.Start();
bool ff = rvtDocument.LoadFamily($"{Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location)}\\Concrete-Rectangular-Column.rfa");
symbol = new FilteredElementCollector(rvtDocument).OfClass(typeof(FamilySymbol))
.WhereElementIsElementType()
.Cast <FamilySymbol>()
.First(x => x.Name == "12 x 18");
symbol.Activate();
t.Commit();
}
using (Transaction t = new Transaction(rvtDocument, "Create "))
{
t.Start();
WallType newWallType = CreateWallType(rvtDocument, wallType, 300);
rVT_Col.CreateColumns(rvtDocument, symbol, base_level, top_level);
rVT_Wall.CreateWalls(rvtDocument, newWallType, base_level, top_level);
rVT_Floor.CreateFloor(rvtDocument, top_level);
t.Commit();
}
return(Result.Succeeded);
}
public bool Contains(WallType wall)
{
return (wallMask & (1 << ((byte)wall - 1))) > 0;
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
// Open source project
Document docHasFamily = app.OpenDocumentFile(
_source_project_path);
// Find system family to copy, e.g. using a named wall type
WallType wallType = null;
//WallTypeSet wallTypes = docHasFamily.WallTypes; // 2013
FilteredElementCollector wallTypes
= new FilteredElementCollector(docHasFamily) // 2014
.OfClass(typeof(WallType));
int i = 0;
foreach (WallType wt in wallTypes)
{
string name = wt.Name;
Debug.Print(" {0} {1}", ++i, name);
if (name.Equals(_wall_type_name))
{
wallType = wt;
break;
}
}
if (null == wallType)
{
message = string.Format(
"Cannot find source wall type '{0}'"
+ " in source document '{1}'. ",
_wall_type_name, _source_project_path);
return(Result.Failed);
}
// Create a new wall type in current document
using (Transaction t = new Transaction(doc))
{
t.Start("Transfer Wall Type");
WallType newWallType = null;
//WallTypeSet wallTypes = doc.WallTypes; // 2013
wallTypes = new FilteredElementCollector(doc)
.OfClass(typeof(WallType)); // 2014
foreach (WallType wt in wallTypes)
{
if (wt.Kind == wallType.Kind)
{
newWallType = wt.Duplicate(_wall_type_name)
as WallType;
Debug.Print(string.Format(
"New wall type '{0}' created.",
_wall_type_name));
break;
}
}
// Assign parameter values from source wall type:
#if COPY_INDIVIDUAL_PARAMETER_VALUE
// Example: individually copy the "Function" parameter value:
BuiltInParameter bip = BuiltInParameter.FUNCTION_PARAM;
string function = wallType.get_Parameter(bip).AsString();
Parameter p = newWallType.get_Parameter(bip);
p.Set(function);
#endif // COPY_INDIVIDUAL_PARAMETER_VALUE
Parameter p = null;
foreach (Parameter p2 in newWallType.Parameters)
{
Definition d = p2.Definition;
if (p2.IsReadOnly)
{
Debug.Print(string.Format(
"Parameter '{0}' is read-only.", d.Name));
}
else
{
p = wallType.get_Parameter(d);
if (null == p)
{
Debug.Print(string.Format(
"Parameter '{0}' not found on source wall type.",
d.Name));
}
else
{
if (p.StorageType == StorageType.ElementId)
{
// Here you have to find the corresponding
// element in the target document.
Debug.Print(string.Format(
"Parameter '{0}' is an element id.",
d.Name));
}
else
{
if (p.StorageType == StorageType.Double)
{
p2.Set(p.AsDouble());
}
else if (p.StorageType == StorageType.String)
{
p2.Set(p.AsString());
}
else if (p.StorageType == StorageType.Integer)
{
p2.Set(p.AsInteger());
}
Debug.Print(string.Format(
"Parameter '{0}' copied.", d.Name));
}
}
}
// Note:
// If a shared parameter parameter is attached,
// you need to create the shared parameter first,
// then copy the parameter value.
}
// If the system family type has some other properties,
// you need to copy them as well here. Reflection can
// be used to determine the available properties.
MemberInfo[] memberInfos = newWallType.GetType()
.GetMembers(BindingFlags.GetProperty);
foreach (MemberInfo m in memberInfos)
{
// Copy the writable property values here.
// As there are no property writable for
// Walltype, I ignore this process here.
}
t.Commit();
}
return(Result.Succeeded);
}
public Wall(Segment seg_, WallType type_)
{
seg = seg_;
type = type_;
}
public void BuildWall(ref Vec2i index, int count, WallType type, bool reverse)
{
if (reverse) {
index -= wallOffsets[(int)type] * count;
}
BuildWall(index, count, type);
if (!reverse) {
index += wallOffsets[(int)type] * count;
}
}
void RoomFinish(UIDocument uiDoc, Transaction tx)
{
Document doc = uiDoc.Document;
tx.Start(Tools.LangResMan.GetString("roomFinishes_transactionName", Tools.Cult));
//Load the selection form
RoomsFinishesControl userControl = new RoomsFinishesControl(uiDoc);
userControl.InitializeComponent();
if (userControl.ShowDialog() == true)
{
//Select wall types
WallType plinte = userControl.SelectedWallType;
WallType newWallType = userControl.DuplicatedWallType;
//Get all finish properties
double height = userControl.BoardHeight;
//Select Rooms in model
IEnumerable <Room> modelRooms = userControl.SelectedRooms;
Dictionary <ElementId, ElementId> skirtingDictionary = new Dictionary <ElementId, ElementId>();
List <KeyValuePair <Wall, Wall> > addedWalls = new List <KeyValuePair <Wall, Wall> >();
//Loop on all rooms to get boundaries
foreach (Room currentRoom in modelRooms)
{
ElementId roomLevelId = currentRoom.LevelId;
SpatialElementBoundaryOptions opt = new SpatialElementBoundaryOptions();
opt.SpatialElementBoundaryLocation = SpatialElementBoundaryLocation.Finish;
IList <IList <Autodesk.Revit.DB.BoundarySegment> > boundarySegmentArray = currentRoom.GetBoundarySegments(opt);
if (null == boundarySegmentArray) //the room may not be bound
{
continue;
}
foreach (IList <Autodesk.Revit.DB.BoundarySegment> boundarySegArr in boundarySegmentArray)
{
if (0 == boundarySegArr.Count)
{
continue;
}
else
{
foreach (Autodesk.Revit.DB.BoundarySegment boundarySegment in boundarySegArr)
{
//Check if the boundary is a room separation lines
Element boundaryElement = doc.GetElement(boundarySegment.ElementId);
if (boundaryElement == null)
{
continue;
}
Categories categories = doc.Settings.Categories;
Category RoomSeparetionLineCat = categories.get_Item(BuiltInCategory.OST_RoomSeparationLines);
if (boundaryElement.Category.Id != RoomSeparetionLineCat.Id)
{
Wall currentWall = Wall.Create(doc, boundarySegment.GetCurve(), newWallType.Id, roomLevelId, height, 0, false, false);
Parameter wallJustification = currentWall.get_Parameter(BuiltInParameter.WALL_KEY_REF_PARAM);
wallJustification.Set(2);
skirtingDictionary.Add(currentWall.Id, boundarySegment.ElementId);
}
}
}
}
}
FailureHandlingOptions options = tx.GetFailureHandlingOptions();
options.SetFailuresPreprocessor(new PlintePreprocessor());
// Now, showing of any eventual mini-warnings will be postponed until the following transaction.
tx.Commit(options);
tx.Start(Tools.LangResMan.GetString("roomFinishes_transactionName", Tools.Cult));
List <ElementId> addedIds = new List <ElementId>(skirtingDictionary.Keys);
foreach (ElementId addedSkirtingId in addedIds)
{
if (doc.GetElement(addedSkirtingId) == null)
{
skirtingDictionary.Remove(addedSkirtingId);
}
}
Wall.ChangeTypeId(doc, skirtingDictionary.Keys, plinte.Id);
//Join both wall
if (userControl.JoinWall)
{
foreach (ElementId skirtingId in skirtingDictionary.Keys)
{
Wall skirtingWall = doc.GetElement(skirtingId) as Wall;
if (skirtingWall != null)
{
Parameter wallJustification = skirtingWall.get_Parameter(BuiltInParameter.WALL_KEY_REF_PARAM);
wallJustification.Set(3);
Wall baseWall = doc.GetElement(skirtingDictionary[skirtingId]) as Wall;
if (baseWall != null)
{
JoinGeometryUtils.JoinGeometry(doc, skirtingWall, baseWall);
}
}
}
}
doc.Delete(newWallType.Id);
tx.Commit();
}
else
{
tx.RollBack();
}
}
public frmWall(Wall wall)
{
InitializeComponent();
_wall = wall;
_level = wall.Level;
_wallType = _wall.WallType;
_building = _level.Building;
_levelList = _building.LevelList;
_wallTypeList = _building.WallTypeList;
_tmpStartPoint = (Point2D)_wall.StartPoint.Clone();
_tmpEndPoint = (Point2D)_wall.EndPoint.Clone();
_tmpVertSpacingSetting = (BarSpacingSettings)_wall.VertSpacingSetting.Clone();
_tmpHorSpacingSetting = (BarSpacingSettings)_wallType.HorSpacingSetting.Clone();
tbName.Text = _wall.Name;
tbStartCoord.Text = _wall.StartPoint.PointText();
tbEndCoord.Text = _wall.EndPoint.PointText();
nudConcreteStartOffset.Value = _wall.ConcreteStartOffset;
nudConcreteEndOffset.Value = _wall.ConcreteEndOffset;
cbRewriteHeight.Checked = _wall.ReWriteHeight;
nudHeight.Value = _wall.Height;
if (_wall.OverrideVertSpacing)
{
tbVertSpacing.Text = _wall.VertSpacingSetting.SpacingText();
}
else
{
tbVertSpacing.Text = _wall.WallType.VertSpacingSetting.SpacingText();
}
if (_wall.OverrideHorSpacing)
{
tbHorSpacing.Text = _wall.HorSpacingSetting.SpacingText();
}
else
{
tbHorSpacing.Text = _wall.WallType.HorSpacingSetting.SpacingText();
}
cbOverrideVertSpacing.Checked = _wall.OverrideVertSpacing;
cbOverrideHorSpacing.Checked = _wall.OverrideHorSpacing;
nudReinforcementStartOffset.Value = _wall.ReiforcementStartOffset;
nudReinforcementEndOffset.Value = _wall.ReiforcementEndOffset;
int Counter = 0;
foreach (Level levelItem in _levelList)
{
cbLevels.Items.Add(levelItem.Name);
if (ReferenceEquals(levelItem, _level))
{
cbLevels.SelectedIndex = Counter;
}
Counter++;
}
Counter = 0;
foreach (WallType wallTypeItem in _wallTypeList)
{
cbWallTypes.Items.Add(wallTypeItem.Name);
if (ReferenceEquals(wallTypeItem, _wallType))
{
cbWallTypes.SelectedIndex = Counter;
}
Counter++;
}
}
/// <summary>
/// Set the necessary data which support the wall creation
/// </summary>
/// <param name="startPoint">the start point of the wall</param>
/// <param name="endPoint">the end point of the wall</param>
/// <param name="level">the level which the wall base on</param>
/// <param name="type">the type of the wall</param>
public void SetNecessaryData(Autodesk.Revit.DB.XYZ startPoint, Autodesk.Revit.DB.XYZ endPoint, Level level, WallType type)
{
m_startPoint = startPoint; // start point
m_endPoint = endPoint; // end point
m_createlevel = level; // the level information
m_createType = type; // the wall type
}
/// <summary>
/// Cumulate the compound wall layer volumes for the given wall.
/// </summary>
void GetWallLayerVolumes(
Wall wall,
ref MapLayerToVolume totalVolumes)
{
WallType wt = wall.WallType;
//CompoundStructure structure= wt.CompoundStructure; // 2011
CompoundStructure structure = wt.GetCompoundStructure(); // 2012
//CompoundStructureLayerArray layers = structure.Layers; // 2011
IList <CompoundStructureLayer> layers = structure.GetLayers(); // 2012
//int i, n = layers.Size; // 2011
int i, n = layers.Count; // 2012
double area = GetWallParameter(wall, _bipArea);
double volume = GetWallParameter(wall, _bipVolume);
double thickness = wt.Width;
string desc = Util.ElementDescription(wall);
Debug.Print(
"{0} with thickness {1}"
+ " and volume {2}"
+ " has {3} layer{4}{5}",
desc,
Util.MmString(thickness),
Util.RealString(volume),
n, Util.PluralSuffix(n),
Util.DotOrColon(n));
// volume for entire wall:
string key = wall.WallType.Name;
totalVolumes.Cumulate(key, volume);
// volume for compound wall layers:
if (0 < n)
{
i = 0;
double total = 0.0;
double layerVolume;
foreach (CompoundStructureLayer
layer in layers)
{
key = wall.WallType.Name + " : "
+ layer.Function;
//layerVolume = area * layer.Thickness; // 2011
layerVolume = area * layer.Width; // 2012
totalVolumes.Cumulate(key, layerVolume);
total += layerVolume;
Debug.Print(
" Layer {0}: function {1}, "
+ "thickness {2}, volume {3}",
++i, layer.Function,
Util.MmString(layer.Width),
Util.RealString(layerVolume));
}
Debug.Print("Wall volume = {0},"
+ " total layer volume = {1}",
Util.RealString(volume),
Util.RealString(total));
if (!Util.IsEqual(volume, total))
{
Debug.Print("Wall host volume parameter"
+ " value differs from sum of all layer"
+ " volumes: {0}",
volume - total);
}
}
}
public void SetType(IntVector2 coordinates, WallType type)
{
mazeData[coordinates.x, coordinates.z] = type;
}
public Wall(WallType typeOfWall)
{
this.Type = PartType.Walls;
this.TypeOfWall = typeOfWall;
}
private void AddCorner(ComplexPoly poly, Vector3 start, Vector3 end, Vector3 center, CornerType type, WallType wallType = WallType.None)
{
center = nudge(start, end, center);
switch (type)
{
case CornerType.Diamond:
break;
case CornerType.Square:
poly.AddLineSegment(start, center, end);
AddWallMesh(wallType, start, center, end);
return;
case CornerType.Rounded:
poly.AddLineSegment(
start,
(start + center) / 2,
(end + center) / 2,
end);
AddWallMesh(wallType,
start,
(start + center) / 2,
(end + center) / 2,
end);
return;
default:
break;
}
poly.AddLineSegment(start, end);
AddWallMesh(wallType, start, end);
}
void AddWallMesh(WallType wallType, params Vector3[] points)
{
switch (wallType)
{
case WallType.Floor:
AddWallMesh(GameMap.floorHeight, 0, points);
break;
case WallType.Wall:
AddWallMesh(GameMap.tileHeight, GameMap.floorHeight, points);
break;
case WallType.Both:
AddWallMesh(GameMap.tileHeight, 0, points);
break;
default:
break;
}
}
public Wall(int x, int y, Location currentLocation, WallType type) : base(x, y, currentLocation, true, true, true)
{
this.type = type;
}
/// <summary>
/// Constructor instantiates the position in the base
/// </summary>
public Wall(int x, int y, WallType type) : base(x, y)
{
this.Type = type;
}
private WallData GetWallTypes()
{
List <WallType> wallElemTypes = _doc.CollectTypes <WallType>(BuiltInCategory.OST_Walls);
// Getting the categories from the indices
string[] mainMaterialCat = TerminusFieldSplit(countItParams.MainMaterial_T);
string[] baseMaterialCat = TerminusFieldSplit(countItParams.BaseMaterial_T);
string[] accentMaterialCat = TerminusFieldSplit(countItParams.AccentMaterial_T);
// Getting the colors from the categories
string[] mainMaterialColor = TerminusFieldSplit(countItParams.MainMaterialColor_T);
string[] baseMaterialColor = TerminusFieldSplit(countItParams.BaseMaterialColor_T);
string[] accentMaterialColor = TerminusFieldSplit(countItParams.AccentMaterialColor_T);
string[] mMatColRange = GetColor(mainMaterialColor[0]);
string[] bMatColRange = GetColor(baseMaterialColor[0]);
string[] aMatColRange = GetColor(accentMaterialColor[0]);
WallType mainWallType = null;
WallType baseWallType = null;
WallType accentWallType = null;
string mainMatCatDefault = null;
string mainMatCatColDefault = null;
string baseMatCatDefault = null;
string baseMatCatColDefault = null;
foreach (WallType type in wallElemTypes)
{
// Get the main material & color
if (mainMaterialCat[0] != null && type.Name.Contains(mainMaterialCat[0]))
{
mainMatCatDefault = mainMaterialCat[0];
if (mMatColRange[0] != null && type.Name.Contains(mMatColRange[0]))
{
mainMatCatColDefault = mMatColRange[0];
mainWallType = type;
}
}
// Get the base material & color
if (baseMaterialCat[0] != null && type.Name.Contains(baseMaterialCat[0]))
{
baseMatCatDefault = baseMaterialCat[0];
if (bMatColRange[0] != null && type.Name.Contains(bMatColRange[0]))
{
baseMatCatColDefault = bMatColRange[0];
baseWallType = type;
}
}
// Get the accent material & color
if (accentMaterialCat[0] != null && type.Name.Contains(accentMaterialCat[0]))
{
if (aMatColRange[0] != null && type.Name.Contains(aMatColRange[0]))
{
accentWallType = type;
}
}
}
return(new WallData(mainWallType, baseWallType, accentWallType,
mainMatCatDefault, mainMatCatColDefault, baseMatCatDefault, baseMatCatColDefault));
}
public ItemType GetItemTypeFromWallType(WallType wallType)
{
if ((int)wallType < TerrariaUtils.WallType_Min || (int)wallType > TerrariaUtils.WallType_Max)
throw new ArgumentException(string.Format("The given item type {0} is invalid.", wallType), "wallType");
if (TerrariaItems.wallTypesItemTypes == null) {
TerrariaItems.wallTypesItemTypes = new ItemType[TerrariaUtils.WallType_Max + 1];
for (int i = TerrariaUtils.ItemType_Min; i < TerrariaUtils.WallType_Max + 1; i++) {
Item dummyItem = new Item();
dummyItem.netDefaults(i);
if (!string.IsNullOrEmpty(dummyItem.name) && dummyItem.createWall != -1)
TerrariaItems.wallTypesItemTypes[dummyItem.createWall] = (ItemType)i;
}
}
return TerrariaItems.wallTypesItemTypes[(int)wallType];
}
public static void SlopedWallTest(
ExternalCommandData revit)
{
Document massDoc = revit.Application.Application.NewFamilyDocument(
@"C:\ProgramData\Autodesk\RAC 2012\Family Templates\English_I\Conceptual Mass\Mass.rft");
Transaction transaction = new Transaction(massDoc);
transaction.SetName("TEST");
transaction.Start();
ExternalCommandData cdata = revit;
Autodesk.Revit.ApplicationServices.Application app = revit.Application.Application;
app = revit.Application.Application;
// Create one profile
ReferenceArray ref_ar = new ReferenceArray();
Autodesk.Revit.DB.XYZ ptA = new XYZ(0, 0, 0);
XYZ ptB = new XYZ(0, 30, 0);
ModelCurve modelcurve = MakeLine(revit.Application, ptA, ptB, massDoc);
ref_ar.Append(modelcurve.GeometryCurve.Reference);
ptA = new XYZ(0, 30, 0);
ptB = new XYZ(2, 30, 0);
modelcurve = MakeLine(revit.Application, ptA, ptB, massDoc);
ref_ar.Append(modelcurve.GeometryCurve.Reference);
ptA = new XYZ(2, 30, 0);
ptB = new XYZ(2, 0, 0);
modelcurve = MakeLine(revit.Application, ptA, ptB, massDoc);
ref_ar.Append(modelcurve.GeometryCurve.Reference);
ptA = new XYZ(2, 0, 0);
ptB = new XYZ(0, 0, 0);
modelcurve = MakeLine(revit.Application, ptA, ptB, massDoc);
ref_ar.Append(modelcurve.GeometryCurve.Reference);
// The extrusion form direction
XYZ direction = new XYZ(-6, 0, 50);
Form form = massDoc.FamilyCreate.NewExtrusionForm(true, ref_ar, direction);
transaction.Commit();
if (File.Exists(@"C:\TestFamily.rfa"))
{
File.Delete(@"C:\TestFamily.rfa");
}
massDoc.SaveAs(@"C:\TestFamily.rfa");
if (!revit.Application.ActiveUIDocument.Document.LoadFamily(@"C:\TestFamily.rfa"))
{
throw new Exception("DID NOT LOAD FAMILY");
}
Family family = null;
foreach (Element el in new FilteredElementCollector(
revit.Application.ActiveUIDocument.Document).WhereElementIsNotElementType().ToElements())
{
if (el is Family)
{
if (((Family)el).Name.ToUpper().Trim().StartsWith("TEST"))
{
family = (Family)el;
}
}
}
FamilySymbol fs = null;
foreach (FamilySymbol sym in family.Symbols)
{
fs = sym;
}
// Create a family instance.
revit.Application.ActiveUIDocument.Document.Create.NewFamilyInstance(
new XYZ(0, 0, 0), fs, revit.Application.ActiveUIDocument.Document.ActiveView.Level,
StructuralType.NonStructural);
WallType wallType = null;
foreach (WallType wt in revit.Application.ActiveUIDocument.Document.WallTypes)
{
if (FaceWall.IsWallTypeValidForFaceWall(revit.Application.ActiveUIDocument.Document, wt.Id))
{
wallType = wt;
break;
}
}
foreach (Element el in new FilteredElementCollector(
revit.Application.ActiveUIDocument.Document).WhereElementIsNotElementType().ToElements())
{
if (el is FamilyInstance)
{
if (((FamilyInstance)el).Symbol.Family.Name.ToUpper().StartsWith("TEST"))
{
Options options = revit.Application.Application.Create.NewGeometryOptions();
options.ComputeReferences = true;
options.View = revit.Application.ActiveUIDocument.Document.ActiveView;
GeometryElement geoel = el.get_Geometry(options);
// Attempt to create a slopped wall from the geometry.
for (int i = 0; i < geoel.Objects.Size; i++)
{
if (geoel.Objects.get_Item(i) is Solid)
{
Solid solid = (Solid)geoel.Objects.get_Item(i);
for (int j = 0; j < solid.Faces.Size; j++)
{
try
{
if (solid.Faces.get_Item(i).Reference != null)
{
FaceWall.Create(revit.Application.ActiveUIDocument.Document,
wallType.Id, WallLocationLine.CoreCenterline,
solid.Faces.get_Item(i).Reference);
}
}
catch (System.Exception e)
{
System.Windows.Forms.MessageBox.Show(e.Message);
}
}
}
}
}
}
}
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
// Open source project
Document docHasFamily = app.OpenDocumentFile(_source_project_path);
// Find system family to copy, e.g. using a named wall type
WallType _selectedWallType = null;
FilteredElementCollector wallTypes
= new FilteredElementCollector(docHasFamily) // 2014
.OfClass(typeof(WallType));
int i = 0;
foreach (WallType wt in wallTypes)
{
//Add the wall type to the list
m_data.Add(wt.Name);
}
//show the form and get a value back from it
//See this page for example: https://stackoverflow.com/questions/5233502/how-to-return-a-value-from-a-form-in-c
using (var f = new frmListDialog(m_data))
{
var result = f.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
_selectedWallTypeName = f.ReturnValue1; //values preserved after close
//loop thru and find the wall type the matches the name
foreach (WallType wt in wallTypes)
{
if (wt.Name == _selectedWallTypeName)
{
//if its a match then...
_selectedWallType = wt;
//_selectedWallTypeName = wt.Name;
}
}
}
}
//foreach( WallType wt in wallTypes )
//{
// string name = wt.Name;
// Debug.Print( " {0} {1}", ++i, name );
// if( name.Equals( _selectedWallTypeName ) )
// {
// _selectedWallType = wt;
// break;
// }
//}
//if( null == _selectedWallType )
//{
// message = string.Format(
// "Cannot find source wall type '{0}'"
// + " in source document '{1}'. ",
// _selectedWallTypeName, _source_project_path );
// return Result.Failed;
//}
// Create a new wall type in current document
using (Transaction t = new Transaction(doc))
{
t.Start("Transfer Wall Type");
WallType newWallType = null;
wallTypes = new FilteredElementCollector(doc).OfClass(typeof(WallType)); // 2014
foreach (WallType wt in wallTypes)
{
if (wt.Kind == _selectedWallType.Kind)
{
newWallType = wt.Duplicate(_selectedWallTypeName) as WallType;
TaskDialog.Show("New wall type '{0}' created.", "Wall type " + _selectedWallTypeName + "created.");
break;
}
}
// Assign parameter values from source wall type:
#if COPY_INDIVIDUAL_PARAMETER_VALUE
// Example: individually copy the "Function" parameter value:
BuiltInParameter bip = BuiltInParameter.FUNCTION_PARAM;
string function = wallType.get_Parameter(bip).AsString();
Parameter p = newWallType.get_Parameter(bip);
p.Set(function);
#endif // COPY_INDIVIDUAL_PARAMETER_VALUE
Parameter p = null;
foreach (Parameter p2 in newWallType.Parameters)
{
Definition d = p2.Definition;
if (p2.IsReadOnly)
{
Debug.Print(string.Format(
"Parameter '{0}' is read-only.", d.Name));
}
else
{
p = _selectedWallType.get_Parameter(d);
if (null == p)
{
Debug.Print(string.Format(
"Parameter '{0}' not found on source wall type.",
d.Name));
}
else
{
if (p.StorageType == StorageType.ElementId)
{
// Here you have to find the corresponding
// element in the target document.
Debug.Print(string.Format(
"Parameter '{0}' is an element id.",
d.Name));
}
else
{
if (p.StorageType == StorageType.Double)
{
p2.Set(p.AsDouble());
}
else if (p.StorageType == StorageType.String)
{
p2.Set(p.AsString());
}
else if (p.StorageType == StorageType.Integer)
{
p2.Set(p.AsInteger());
}
Debug.Print(string.Format(
"Parameter '{0}' copied.", d.Name));
}
}
}
// Note:
// If a shared parameter parameter is attached,
// you need to create the shared parameter first,
// then copy the parameter value.
}
// If the system family type has some other properties,
// you need to copy them as well here. Reflection can
// be used to determine the available properties.
MemberInfo[] memberInfos = newWallType.GetType()
.GetMembers(BindingFlags.GetProperty);
foreach (MemberInfo m in memberInfos)
{
// Copy the writable property values here.
// As there are no property writable for
// Walltype, I ignore this process here.
}
t.Commit();
}
return(Result.Succeeded);
}
/// <summary>
/// Creates a creator from DoorWindowInfo.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="doorWindowInfo">The DoorWindowInfo.</param>
/// <param name="instanceHandle">The instance handle.</param>
/// <param name="levelId">The level id.</param>
/// <returns>The creator.</returns>
public static DoorWindowDelayedOpeningCreator Create(ExporterIFC exporterIFC, DoorWindowInfo doorWindowInfo, IFCAnyHandle instanceHandle, ElementId levelId)
{
if (exporterIFC == null || doorWindowInfo == null)
{
return(null);
}
DoorWindowDelayedOpeningCreator doorWindowDelayedOpeningCreator = null;
if (doorWindowInfo.HasRealWallHost)
{
Document doc = doorWindowInfo.HostObject.Document;
Wall wall = doorWindowInfo.HostObject as Wall;
FamilyInstance famInst = doorWindowInfo.InsertInstance;
ElementId hostId = wall != null ? wall.Id : ElementId.InvalidElementId;
ElementId instId = famInst != null ? famInst.Id : ElementId.InvalidElementId;
doorWindowDelayedOpeningCreator = new DoorWindowDelayedOpeningCreator();
doorWindowDelayedOpeningCreator.HostId = hostId;
doorWindowDelayedOpeningCreator.InsertId = instId;
doorWindowDelayedOpeningCreator.PosHingeSide = doorWindowInfo.PosHingeSide;
doorWindowDelayedOpeningCreator.DoorWindowHnd = instanceHandle;
doorWindowDelayedOpeningCreator.LevelId = levelId;
doorWindowDelayedOpeningCreator.CreatedFromDoorWindowInfo = true;
WallType wallType = doc.GetElement(wall.GetTypeId()) as WallType;
double unScaledWidth = ((wallType != null) && (wallType.Kind != WallKind.Curtain)) ? wallType.Width : 0.0;
if (!MathUtil.IsAlmostZero(unScaledWidth))
{
IFCAnyHandle openingHnd = exporterIFC.GetDoorWindowOpeningHandle(instId);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(openingHnd))
{
XYZ cutDir = null;
CurveLoop cutLoop = null;
try
{
cutLoop = ExporterIFCUtils.GetInstanceCutoutFromWall(wall.Document, wall, famInst, out cutDir);
}
catch
{
cutLoop = null;
// Couldn't create opening for door in wall - report as error in log when we create log file.
}
if (cutLoop != null)
{
if (doorWindowDelayedOpeningCreator.ExtrusionData == null)
{
doorWindowDelayedOpeningCreator.ExtrusionData = new List <IFCExtrusionData>();
}
IFCExtrusionData extrusionData = new IFCExtrusionData();
extrusionData.ExtrusionDirection = cutDir;
extrusionData.ScaledExtrusionLength = UnitUtil.ScaleLength(unScaledWidth);
extrusionData.AddLoop(cutLoop);
doorWindowDelayedOpeningCreator.ScaledHostWidth = UnitUtil.ScaleLength(unScaledWidth);
doorWindowDelayedOpeningCreator.ExtrusionData.Add(extrusionData);
doorWindowDelayedOpeningCreator.HasValidGeometry = true;
}
else
{
// Couldn't create opening for door in wall - report as error in log when we create log file.
}
}
}
}
return(doorWindowDelayedOpeningCreator);
}
public async Task DeleteWallAsync(int wallId, UserAndOrganizationDto userOrg, WallType type)
{
var wall = await _wallsDbSet
.Include(x => x.Moderators)
.Include(x => x.Members)
.Include(x => x.Posts)
.Include(x => x.Posts.Select(y => y.Comments))
.FirstOrDefaultAsync(x => x.Id == wallId &&
x.OrganizationId == userOrg.OrganizationId &&
x.Type == type);
if (wall == null)
{
throw new ValidationException(ErrorCodes.ContentDoesNotExist);
}
var hasPermission = await _permissionService.UserHasPermissionAsync(userOrg, AdministrationPermissions.Wall);
var isWallModerator = wall.Moderators.Any(x => x.UserId == userOrg.UserId) || hasPermission;
if (!isWallModerator)
{
throw new UnauthorizedException();
}
_wallsDbSet.Remove(wall);
await _uow.SaveChangesAsync(userOrg.UserId);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = commandData.Application.ActiveUIDocument.Document;
View view = uidoc.ActiveView;
ElementId levelid = view.GenLevel.Id;
bool iscontinue = true;
do
{
List <Element> eles = new List <Element>();
try
{
eles = GetSelected(uidoc);
}
catch
{
iscontinue = false;
continue;
}
if (eles == null)
{
TaskDialog.Show("wrong", "选择的符号线的数量不为2."); continue;
}
//get line_closer & line_farther
Line line1 = (eles[0] as DetailLine).GeometryCurve as Line;
Line line2 = (eles[1] as DetailLine).GeometryCurve as Line;
if (line1 == null || line2 == null)
{
TaskDialog.Show("wrong", "仅支持直线."); continue;
}
Line line1unbound = (eles[0] as DetailLine).GeometryCurve as Line;
line1unbound.MakeUnbound();
Line line2unbound = (eles[1] as DetailLine).GeometryCurve as Line;
line2unbound.MakeUnbound();
//get distance from origin
IntersectionResult result1 = line1unbound.Project(new XYZ(-1000 / 304.8, -1000 / 304.8, line1.GetEndPoint(0).Z));
double distance1 = result1.Distance;
IntersectionResult result2 = line2unbound.Project(new XYZ(-1000 / 304.8, -1000 / 304.8, line2.GetEndPoint(0).Z));
double distance2 = result2.Distance;
if (IsAlmostEqual(distance1, distance2))
{
TaskDialog.Show("wrong", "两条线间距太小."); continue;
}
Line line_closer = null;
Line line_farther = null;
Line line_closer_unbound = null;
Line line_farther_unbound = null;
if (distance1 > distance2)
{
line_closer = line2;
line_farther = line1;
line_closer_unbound = line2unbound;
line_farther_unbound = line1unbound;
}
else
{
line_closer = line1;
line_farther = line2;
line_closer_unbound = line1unbound;
line_farther_unbound = line2unbound;
}
//Determine parallel
XYZ dir1 = line_closer.Direction;
XYZ dir2 = line_farther.Direction;
bool isparallel = dir1.IsAlmostEqualTo(dir2) || dir1.IsAlmostEqualTo(-dir2);
if (!isparallel)
{
TaskDialog.Show("wrong", "请选择平行的线."); continue;
}
//get points
//makeunbound
XYZ startpoint_closerline = line_closer.GetEndPoint(0);
XYZ endpoint_closerline = line_closer.GetEndPoint(1);
XYZ startpoint_fartherline = line_farther.GetEndPoint(0);
XYZ endpoint_fartherline = line_farther.GetEndPoint(1);
//get width of wall
IntersectionResult intersection = line_closer_unbound.Project(startpoint_fartherline);
double distance = intersection.Distance;
XYZ point_intersection = intersection.XYZPoint;
Line normalline = Line.CreateBound(point_intersection, startpoint_fartherline);
XYZ normallinedir = normalline.Direction;
//offset
Line wallline = null;
if (line_closer.Length > line_farther.Length)
{
wallline = OffsetLine(line_closer, normallinedir, distance / 2);
}
else
{
wallline = OffsetLine(line_farther, -normallinedir, distance / 2);
}
//get material
FilteredElementCollector materialcollector = new FilteredElementCollector(doc);
materialcollector.OfCategory(BuiltInCategory.OST_Materials).OfClass(typeof(Material));
IEnumerable <Material> materials = from ele in materialcollector
let material = ele as Material
where material.Name == "BRIK"
select material;
if (materials.Count() == 0)
{
TaskDialog.Show("wrong", "未找到BRIK材质"); continue;
}
ElementId materialid = materials.First().Id;
//get walltype
FilteredElementCollector walltypecollector = new FilteredElementCollector(doc);
walltypecollector.OfClass(typeof(WallType)).OfCategory(BuiltInCategory.OST_Walls).WhereElementIsElementType();
IEnumerable <WallType> walltypes = from element in walltypecollector
let walltypetemp = element as WallType
let para = walltypetemp.get_Parameter(BuiltInParameter.WALL_ATTR_WIDTH_PARAM)
where walltypetemp.Name.Contains("A-WALL-INTR")
where walltypetemp.Kind == WallKind.Basic
// where para.AsDouble() == distance
where IsAlmostEqual(para.AsDouble(), distance)
select walltypetemp;
if (walltypecollector.Count() == 0)
{
TaskDialog.Show("wrong", "请先随意新建一个类型."); continue;
}
WallType typetemp = null;
foreach (WallType type in walltypecollector)
{
if (type.Kind == WallKind.Basic)
{
typetemp = type; break;
}
}
if (typetemp == null)
{
TaskDialog.Show("wrong", "请先随意新建一个内墙类型."); continue;
}
WallType walltype = null;
if (walltypes.Count() == 0)
{
TaskDialog.Show("wrong", "未找到合适的类型,将新建一个类型");
using (Transaction createwalltype = new Transaction(doc))
{
createwalltype.Start("新建墙类型");
walltype = typetemp.Duplicate("A-WALL-INTR-" + Convert.ToInt32((distance * 304.8)).ToString()) as WallType;
CompoundStructure compoundstructure = CompoundStructure.CreateSingleLayerCompoundStructure(MaterialFunctionAssignment.Structure, distance, materialid);
walltype.SetCompoundStructure(compoundstructure);
createwalltype.Commit();
}
}
else
{
walltype = walltypes.First();
}
//transaction
using (Transaction transaction = new Transaction(doc))
{
transaction.Start("生成墙");
Wall wall = Wall.Create(doc, wallline, walltype.Id, levelid, 10, 0, false, false);
transaction.Commit();
}
}while (iscontinue);
return(Result.Succeeded);
}
public int GetWalls(out WallType wall0, out WallType wall1)
{
wall0 = WallType.None;
wall1 = WallType.None;
bool firstSet = false;
int count = 0;
for (int i = 0; i < 8; i++) {
if (((wallMask >> i) & 1) > 0) {
count++;
if (!firstSet) {
wall0 = (WallType)(i + 1);
firstSet = true;
} else {
wall1 = (WallType)(i + 1);
}
}
}
return count;
}
public void SpawnWall(WallType type, WallLocation location, GameObject owner)
{
GameObject WallObject;
switch (type)
{
default:
case WallType.None:
return;
case WallType.BarbedWire:
WallObject = Instantiate(WireFencePrefab) as GameObject;
break;
case WallType.BrickWall:
WallObject = Instantiate(BrickWallPrefab) as GameObject;
break;
case WallType.WoodWall:
WallObject = Instantiate(WoodWallPrefab) as GameObject;
break;
}
var WallScript = WallObject.GetComponent <WallScript>();
WallScript.betweenA = owner.GetComponent <HexTile>().Coordinate;
WallScript.betweenB = GetBetween(WallScript.betweenA, location)[1];
WallObject.transform.SetParent(owner.transform);
switch (location)
{
default:
case WallLocation.Upper:
WallObject.transform.localPosition = new Vector3(-0.8683267f, 0f);
break;
case WallLocation.Lower:
WallObject.transform.localPosition = new Vector3(0.8683267f, 0f);
break;
case WallLocation.UpperLeft:
WallObject.transform.localPosition = new Vector3(-0.4341633f, 0.7519927f);
WallObject.transform.localRotation = Quaternion.Euler(0f, 0f, -60f);
break;
case WallLocation.LowerRight:
WallObject.transform.localPosition = new Vector3(0.4341633f, -0.7519927f);
WallObject.transform.localRotation = Quaternion.Euler(0f, 0f, -60f);
break;
case WallLocation.UpperRight:
WallObject.transform.localPosition = new Vector3(-0.4341624f, -0.7519927f);
WallObject.transform.localRotation = Quaternion.Euler(0f, 0f, -120f);
break;
case WallLocation.LowerLeft:
WallObject.transform.localPosition = new Vector3(0.4341624f, 0.7519927f);
WallObject.transform.localRotation = Quaternion.Euler(0f, 0f, -120f);
break;
}
}
public WallUnit(World world, WallType wallType)
: base(world, WorldLaw.DefaultUnitCreationSpeed,
WorldLaw.DefaultEnemyLifeCount)
{
WallUnitType = wallType;
}
private void SpawnWall(WallType type, IntVector3 position, Rotation rotation)
{
var prefabs = registry.WallObjectHelper.Prefabs;
if (!prefabs.ContainsKey(type)) {
Logger.Warn("Could not load prefab for type {0}.", type);
return;
}
var prefab = prefabs[type].Spawn();
prefab.transform.position = position.ToVector3();
this.goReference = prefab;
this.Type = type;
SetRotation(rotation);
Logger.Info("Spawned wall {0} at {1} {2}.", type, position, this.goReference.transform.eulerAngles);
}
private NewlyCreatedPostDTO MapNewlyCreatedPostToDto(Post post, UserDto user, WallType wallType)
{
var newlyCreatedPostDto = new NewlyCreatedPostDTO
{
Id = post.Id,
MessageBody = post.MessageBody,
PictureId = post.PictureId,
Created = post.Created,
CreatedBy = post.CreatedBy,
User = user,
WallType = wallType,
WallId = post.WallId
};
return(newlyCreatedPostDto);
}
private void populateMaze()
{
//SetType(0, 1, WallType.Floor);
IntVector2 pos = new IntVector2(0, 0);
for (; pos.x < size.x; pos.x++)
{
pos.z = 0;
for (; pos.z < size.z; pos.z++)
{
WallType type = GetType(pos);
if (type == WallType.SolidWall || type == WallType.PermanentWall)
{
createPrefab <MazeWall>(pos, dir, wallPrefab);
}
if (type == WallType.Door)
{
createPrefab <MazeDoor>(pos, dir, doorPrefab);
createPrefabMaterial <MazeFloor>(pos, floorPrefab, 1);
}
if (type == WallType.TreasureChest)
{
createPrefab <TreasureChest>(pos, dir, treasurePrefab);
createPrefabMaterial <MazeFloor>(pos, floorPrefab, 1);
if (hasCeiling)
{
createPrefab <MazeCeiling>(pos, ceilingPrefab);
}
}
if (type == WallType.LootRoom)
{
createPrefabMaterial <MazeFloor>(pos, floorPrefab, 1);
if (hasCeiling)
{
createPrefab <MazeCeiling>(pos, ceilingPrefab);
}
}
if (type == WallType.Floor)
{
createPrefab <MazeFloor>(pos, dir, floorPrefab);
if (hasCeiling)
{
createPrefab <MazeCeiling>(pos, ceilingPrefab);
}
if (pos.x != doorEntrance.x && pos.z != doorEntrance.z)
{
if (rollRandom(7))
{
createPrefab <MazeVine>(pos, vinePrefab);
createPrefab <MazeDoor>(pos, doorPrefab);
randomlyAddCoin(pos, 1.5f, 10);
}
else if (mazeNum >= 2 && rollRandom(5))
{
//CALC THE ORIENTATION
MazeDirection facing = MazeDirection.East;
createPrefab <MazeBreakable>(pos, facing, breakablePrefab);
}
else if (mazeNum >= 4 && rollRandom(5))
{
createPrefab <MazeJumpObstacle>(pos, jumpPrefab);
randomlyAddCoin(pos, 4.5f, 10);
}
else if (mazeNum >= 6 && rollRandom(5))
{
createPrefab <MazePushObstacle>(pos, pushPrefab);
}
else
{
randomlyAddCoin(pos, 1.5f, 10);
}
}
}
}
}
}
private void AddStraight(ComplexPoly poly, Vector3 a, Vector3 b, WallType wallType = WallType.None)
{
poly.AddLineSegment(a, b);
AddWallMesh(wallType, a, b);
}
/// <summary>
/// try to create a wall. if failed, keep this dialog,
/// otherwise, close it.
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void okButton_Click(object sender, EventArgs e)
{
try
{
Document document = m_commandData.Application.ActiveUIDocument.Document;
double x, y, z;
Autodesk.Revit.DB.XYZ sPoint;
//try to convert string to double, and return without closing dialog if failed
if (Double.TryParse(this.spXTextBox.Text, out x) &&
Double.TryParse(this.spYTextBox.Text, out y) &&
Double.TryParse(this.spZTextBox.Text, out z))
{
sPoint = new Autodesk.Revit.DB.XYZ(x, y, z);
}
else
{
TaskDialog.Show("Revit", "Failed to get the start point.");
return;
}
//try to convert string to double, and return without closing dialog if failed
Autodesk.Revit.DB.XYZ ePoint;
if (Double.TryParse(this.epXTextBox.Text, out x) &&
Double.TryParse(this.epYTextBox.Text, out y) &&
Double.TryParse(this.epZTextBox.Text, out z))
{
ePoint = new Autodesk.Revit.DB.XYZ(x, y, z);
}
else
{
TaskDialog.Show("Revit", "Failed to get the end point.");
return;
}
if (sPoint.IsAlmostEqualTo(ePoint))
{
TaskDialog.Show("Revit", "The start point and end point cannot have the same location.");
return;
}
Autodesk.Revit.DB.Line line = Line.CreateBound(sPoint, ePoint);
Level level = this.levelsComboBox.SelectedItem as Level;
WallType wallType = this.wallTypesComboBox.SelectedItem as WallType;
//check whether parameters used to create wall are not null
if (null == line)
{
TaskDialog.Show("Revit", "Create line failed.");
return;
}
if (null == level || null == wallType)
{
TaskDialog.Show("Revit", "Please select a level and a wall type.");
return;
}
m_createdWall = Wall.Create(document, line, wallType.Id, level.Id, 10, 0, true, true);
document.Regenerate();
this.DialogResult = DialogResult.OK;
this.Close();
}
catch (Exception ex)
{
TaskDialog.Show("Revit", ex.Message);
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elementSet)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
List <string> liste = new List <string>();
Form1 form = new Form1(doc);
bool RoomName = false;
bool RoomWalls = false;
bool RoomFurniture = false;
bool RoomDoors = false;
bool RoomAddFurniture = false;
bool RoomFinishes = false;
if (form.DialogResult == System.Windows.Forms.DialogResult.Cancel)
{
return(Result.Cancelled);
}
if (DialogResult.OK == form.ShowDialog())
{
//Nom du paramètre de type "oui/non" permettant de détecter les locaux confidentiels
string param = "G6_Confidentiel";
//Nom des éléments pour le remplacement des familles
string wall_type = "XXXX";
string door_type = "XXXX_P:XXXX";
string furniture_type = "XXXX_M:XXXX";
string plumbing_type = "XXXX_S:XXXX";
string furniture_param = "Dimension";
string plumbing_param = "Dimension";
//Valeur attribuée aux paramètres cryptés
string change = "XXXX";
//Clé de décryptage
List <string> key = new List <string>();
string phase = "Nouvelle construction";
string phase2 = "New Construction";
ElementId levelID = null;
FamilySymbol door_fs = null;
FamilySymbol furniture_fs = null;
FamilySymbol plumbing_fs = null;
ElementId eid = null;
Line newWallLine_2 = null;
List <Curve> curves = new List <Curve>();
int count = 0;
Random rnd = new Random();
int Offset = rnd.Next(4, 6);
double random = rnd.NextDouble() * Offset;
//double random = Offset;
using (Transaction t = new Transaction(doc, "Crypter la maquette"))
{
t.Start();
RoomName = form.RoomName();
RoomWalls = form.RoomWalls();
RoomFurniture = form.RoomFurniture();
RoomDoors = form.RoomDoors();
RoomAddFurniture = form.RoomAddFurnitures();
RoomFinishes = form.RoomFinishes();
//Sélection du type de porte de remplacement
FamilySymbol fs = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_Doors).Cast <FamilySymbol>()
where element.Family.Name + ":" + element.Name == door_type
select element).ToList <FamilySymbol>().First();
door_fs = fs;
//Sélection du type de mobilier de remplacement
FamilySymbol fs_furniture = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_Furniture).Cast <FamilySymbol>()
where element.Family.Name + ":" + element.Name == furniture_type
select element).ToList <FamilySymbol>().First();
furniture_fs = fs_furniture;
//Sélection du type de sanitaire de remplacement
FamilySymbol fs_plumbing = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_PlumbingFixtures).Cast <FamilySymbol>()
where element.Family.Name + ":" + element.Name == plumbing_type
select element).ToList <FamilySymbol>().First();
plumbing_fs = fs_plumbing;
//Sélection du type de mur de remplacement
WallType walltype = (from element in new FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Walls).WhereElementIsElementType()
where element.Name == wall_type
select element).Cast <WallType>().ToList <WallType>().First();
eid = walltype.Id;
//Remplacement du mobilier
if (RoomFurniture == true)
{
foreach (FamilyInstance furniture_instance in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_Furniture).Cast <FamilyInstance>())
{
if (furniture_instance.Room != null && furniture_instance.Room.LookupParameter(param).AsInteger() == 1)
{
try
{
string original = furniture_instance.Name;
furniture_instance.Symbol = furniture_fs;
Random rd = new Random();
double random_dimension = 0.5 + rd.NextDouble();
furniture_instance.LookupParameter(furniture_param).Set(UnitUtils.ConvertToInternalUnits(random_dimension, DisplayUnitType.DUT_METERS));
key.Add("F;" + furniture_instance.Id.ToString() + ";" + original + ";" + furniture_instance.Room.Id.ToString() + ";" + furniture_instance.Room.Name);
}
catch
{
}
}
}
foreach (FamilyInstance plumbing_instance in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_PlumbingFixtures).Cast <FamilyInstance>())
{
if (plumbing_instance.Room != null && plumbing_instance.Room.LookupParameter(param).AsInteger() == 1)
{
string original = plumbing_instance.Name;
plumbing_instance.Symbol = plumbing_fs;
Random rd = new Random();
double random_dimension = 0.5 + rd.NextDouble();
plumbing_instance.LookupParameter(plumbing_param).Set(UnitUtils.ConvertToInternalUnits(random_dimension, DisplayUnitType.DUT_METERS));
key.Add("P;" + plumbing_instance.Id.ToString() + ";" + original + ";" + plumbing_instance.Room.Id.ToString() + ";" + plumbing_instance.Room.Name);
}
}
}
//Lister les pièces confidentielles et appartenant à la phase désignée
List <Room> rooms = (from element in new FilteredElementCollector(doc).OfClass(typeof(SpatialElement)).OfCategory(BuiltInCategory.OST_Rooms).Cast <Room>()
where element.LookupParameter(param).AsInteger() == 1 &&
(element.get_Parameter(BuiltInParameter.ROOM_PHASE).AsValueString() == phase || element.get_Parameter(BuiltInParameter.ROOM_PHASE).AsValueString() == phase2)
select element).ToList <Room>();
//Première boucle sur les pièces confidentielles pour renseigner la clé
foreach (Room r in rooms)
{
Parameter name = r.get_Parameter(BuiltInParameter.ROOM_NAME);
Parameter number = r.get_Parameter(BuiltInParameter.ROOM_NUMBER);
Parameter floor = r.get_Parameter(BuiltInParameter.ROOM_FINISH_FLOOR);
LocationPoint lp = r.Location as LocationPoint;
XYZ point = lp.Point;
//Ajout des valeurs de paramètres initiaux à la clé de déchiffrement
key.Add("R;" + r.Id.ToString() + ";" + name.AsString() + ";" + number.AsString() + ";" + floor.AsString() + ";" + point.X + ";" + point.Y + ";" + point.Z);
}
//Deuxième boucle sur les pièces confidentielles pour modifier paramètres et géométrie
foreach (Room r in rooms)
{
Parameter name = r.get_Parameter(BuiltInParameter.ROOM_NAME);
Parameter number = r.get_Parameter(BuiltInParameter.ROOM_NUMBER);
Parameter floor = r.get_Parameter(BuiltInParameter.ROOM_FINISH_FLOOR);
LocationPoint lp = r.Location as LocationPoint;
XYZ point = lp.Point;
//Remplacement des valeurs de paramètres des pièces par le code
if (RoomName == true)
{
name.Set(change);
number.Set(change + count.ToString());
}
if (RoomFinishes == true)
{
floor.Set(change);
}
//Incrémentation du nombre de pièces cryptées
count += 1;
//Retrouver les limites des pièces
IList <IList <Autodesk.Revit.DB.BoundarySegment> > segments = r.GetBoundarySegments(new SpatialElementBoundaryOptions());
int segments_number = 0;
int boundaries_number = 0;
BoundarySegment bd0 = null;
BoundarySegment bd1 = null;
BoundarySegment bd2 = null;
if (null != segments) //la pièce peut ne pas être fermée
{
foreach (IList <Autodesk.Revit.DB.BoundarySegment> segmentList in segments)
{
segments_number += 1;
foreach (Autodesk.Revit.DB.BoundarySegment boundarySegment in segmentList)
{
boundaries_number += 1;
if (boundaries_number == 1)
{
bd0 = boundarySegment;
}
if (boundaries_number == 3)
{
bd1 = boundarySegment;
}
if (boundaries_number == 4)
{
bd2 = boundarySegment;
}
//Retrouver l'élément qui forme la limite de pièce
Element elt = r.Document.GetElement(boundarySegment.ElementId);
//Déterminer si cet élément est un mur
bool isWall = false;
if (elt as Wall != null)
{
isWall = true;
}
//Si c'est un mur, continuer
if (isWall == true)
{
Wall wall = elt as Wall;
Parameter function = wall.WallType.get_Parameter(BuiltInParameter.FUNCTION_PARAM);
//Ne traiter que les murs intérieurs
if (function.AsValueString() == "Interior" || function.AsValueString() == "Intérieur")
{
if (RoomDoors == true)
{
//Changer les types de portes
IList <ElementId> inserts = (wall as HostObject).FindInserts(true, true, true, true);
foreach (ElementId id in inserts)
{
Element e = doc.GetElement(id);
try
{
FamilyInstance fi = e as FamilyInstance;
if (fi.get_Parameter(BuiltInParameter.PHASE_CREATED).AsValueString() == phase || fi.get_Parameter(BuiltInParameter.PHASE_CREATED).AsValueString() == phase2)
{
string original = fi.Name;
fi.Symbol = door_fs;
LocationPoint doorPoint = fi.Location as LocationPoint;
XYZ pt = doorPoint.Point;
key.Add("D;" + fi.Id.ToString() + ";" + original + ";" + pt.X + ";" + pt.Y + ";" + pt.Z);
}
}
catch
{
}
}
}
//Récupérer les points de départ et d'extrémité des murs
LocationCurve wallLine = wall.Location as LocationCurve;
XYZ endPoint0 = wallLine.Curve.GetEndPoint(0);
XYZ endPoint1 = wallLine.Curve.GetEndPoint(1);
//Ajout des coordonnées initiales des murs à la clé de déchiffrement
key.Add("W;" + wall.Id.ToString() + ";" + wall.WallType.Name + ";" + endPoint0.X.ToString() + ";" + endPoint0.Y.ToString() + ";" + endPoint1.X.ToString() + ";" + endPoint1.Y.ToString());
levelID = wall.LevelId;
//Changer le type des murs
if (RoomWalls == true)
{
wall.ChangeTypeId(eid);
}
}
}
}
}
if (RoomAddFurniture == true && r.Area > UnitUtils.ConvertToInternalUnits(7, DisplayUnitType.DUT_SQUARE_METERS))
{
//Créer de nouveaux meubles de façon aléatoire dans les pièces confidentielles
Random rd = new Random();
int offset = rnd.Next(0, 10);
XYZ new_point = new XYZ(point.X + offset * 0.5, point.Y + offset * 0.3, point.Z);
if (offset > 1 && offset < 9)
{
FamilyInstance nf = doc.Create.NewFamilyInstance(new_point, furniture_fs, r.Level, StructuralType.NonStructural);
key.Add("NF;" + nf.Id.ToString());
}
}
}
}
SaveFileDialog saveFileDialog1 = new SaveFileDialog();
saveFileDialog1.Title = "Choisir le chemin du fichier de chiffrement";
saveFileDialog1.Filter = "Fichier texte (*.txt)|*.txt";
saveFileDialog1.RestoreDirectory = true;
DialogResult result = saveFileDialog1.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
string txt_filename = saveFileDialog1.FileName;
if (File.Exists(txt_filename))
{
File.Delete(txt_filename);
}
//Ecrire dans le fichier clé
using (StreamWriter sw = new StreamWriter(txt_filename))
{
foreach (string s in key)
{
sw.WriteLine(s);
}
}
//Process.Start(txt_filename);
}
t.Commit();
return(Result.Succeeded);
}
}
return(Result.Succeeded);
}
private int WallBonus(WallType? wallType, WallType reference)
{
if (!wallType.HasValue) { return 0; }
if (wallType.Value == reference) { return ContinueWallBonus; }
if (wallType.Value == WallType.OuterWall) { return BranchWallBonus; }
return 0;
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elementSet)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
List <string> key = new List <string>();
using (Transaction t = new Transaction(doc, "Décrypter la maquette"))
{
t.Start();
OpenFileDialog openFileDialog1 = new OpenFileDialog();
openFileDialog1.Title = "Sélectionner la clé de déchiffrement";
openFileDialog1.Filter = "Fichier texte (*.txt)|*.txt";
openFileDialog1.RestoreDirectory = true;
DialogResult result = openFileDialog1.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
string txt_filename = openFileDialog1.FileName;
//Lire le fichier Clé.txt
int counter = 0;
string line;
List <ElementId> to_delete = new List <ElementId>();
System.IO.StreamReader file0 = new System.IO.StreamReader(txt_filename);
while ((line = file0.ReadLine()) != null)
{
key.Add(line);
string[] list = line.Split(';');
//Supprimer les murs et mobiliers crées
if (line.StartsWith("NW;"))
{
Wall wall = (from element in new FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Walls).WhereElementIsNotElementType()
where element.Id.ToString() == list[1]
select element).Cast <Wall>().ToList <Wall>().First();
to_delete.Add(wall.Id);
}
if (line.StartsWith("NF;"))
{
FamilyInstance nf = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_Furniture)
where element.Id.ToString() == list[1]
select element).Cast <FamilyInstance>().ToList <FamilyInstance>().First();
to_delete.Add(nf.Id);
}
counter++;
}
file0.Close();
foreach (ElementId eid in to_delete)
{
doc.Delete(eid);
}
//Récupérer les valeurs de paramètre initiales pour les murs, à partir du fichier Clé.txt
System.IO.StreamReader file = new System.IO.StreamReader(txt_filename);
while ((line = file.ReadLine()) != null)
{
key.Add(line);
string[] list = line.Split(';');
if (line.StartsWith("W;"))
{
Wall wall = (from element in new FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Walls).WhereElementIsNotElementType()
where element.Id.ToString() == list[1]
select element).Cast <Wall>().ToList <Wall>().First();
WallType walltype = (from element in new FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Walls).WhereElementIsElementType()
where element.Name == list[2]
select element).Cast <WallType>().ToList <WallType>().First();
wall.ChangeTypeId(walltype.Id);
LocationCurve wallLine = wall.Location as LocationCurve;
XYZ endPoint2 = wallLine.Curve.GetEndPoint(0);
XYZ endPoint3 = wallLine.Curve.GetEndPoint(1);
XYZ endPoint0 = new XYZ(Convert.ToDouble(list[3]), Convert.ToDouble(list[4]), endPoint2.Z);
XYZ endPoint1 = new XYZ(Convert.ToDouble(list[5]), Convert.ToDouble(list[6]), endPoint3.Z);
Line newWallLine = Line.CreateBound(endPoint0, endPoint1);
wallLine.Curve = newWallLine;
}
if (line.StartsWith("D;"))
{
FamilyInstance door = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_Doors)
where element.Id.ToString() == list[1] select element).Cast <FamilyInstance>().ToList <FamilyInstance>().First();
FamilySymbol door_type = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_Doors)
where element.Name == list[2] select element).Cast <FamilySymbol>().ToList <FamilySymbol>().First();
door.Symbol = door_type;
XYZ point = new XYZ(Convert.ToDouble(list[3]), Convert.ToDouble(list[4]), Convert.ToDouble(list[5]));
LocationPoint lp = door.Location as LocationPoint;
lp.Point = point;
}
if (line.StartsWith("F;"))
{
FamilyInstance furniture = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_Furniture)
where element.Id.ToString() == list[1] select element).Cast <FamilyInstance>().ToList <FamilyInstance>().First();
FamilySymbol furniture_type = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_Furniture)
where element.Name == list[2] select element).Cast <FamilySymbol>().ToList <FamilySymbol>().First();
furniture.Symbol = furniture_type;
}
if (line.StartsWith("P;"))
{
FamilyInstance plumbing = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance)).OfCategory(BuiltInCategory.OST_PlumbingFixtures)
where element.Id.ToString() == list[1] select element).Cast <FamilyInstance>().ToList <FamilyInstance>().First();
FamilySymbol plumbing_type = (from element in new FilteredElementCollector(doc).OfClass(typeof(FamilySymbol)).OfCategory(BuiltInCategory.OST_PlumbingFixtures)
where element.Name == list[2] select element).Cast <FamilySymbol>().ToList <FamilySymbol>().First();
plumbing.Symbol = plumbing_type;
}
if (line.StartsWith("R;"))
{
Room r = (from element in new FilteredElementCollector(doc).OfClass(typeof(SpatialElement)).OfCategory(BuiltInCategory.OST_Rooms)
where element.Id.ToString() == list[1] select element).Cast <Room>().ToList <Room>().First();
Parameter name = r.get_Parameter(BuiltInParameter.ROOM_NAME);
Parameter number = r.get_Parameter(BuiltInParameter.ROOM_NUMBER);
Parameter floor = r.get_Parameter(BuiltInParameter.ROOM_FINISH_FLOOR);
name.Set(list[2]);
number.Set(list[3]);
floor.Set(list[4]);
LocationPoint lp = r.Location as LocationPoint;
XYZ previousLocation = new XYZ(Convert.ToDouble(list[5]), Convert.ToDouble(list[6]), lp.Point.Z);
lp.Point = previousLocation;
}
counter++;
}
file.Close();
}
t.Commit();
}
return(Result.Succeeded);
}
private WallType InvertType(WallType type)
{
return(type == WallType.Center ? WallType.Side : WallType.Center);
}
public void BuildWall(ref Vec2i index, int count, WallType type)
{
BuildWall(index, count, type);
index += wallOffsets[(int)type] * count;
}
public bool IsWall(WallType type, int coord)
{
return(type == WallType.Vertical ? _verticalWalls.Contains(coord) : _horizontalWalls.Contains(coord));
}
public void BuildWall(Vec2i index, int count, WallType type)
{
VesselTile tile;
for (int i = 0; i < count; i++) {
if (IsWallLegal(index, type)) {
tile = TryGetTile(index);
if (tile == null) {
tile = new VesselTile();
SetTile(index, tile);
}
tile.wallMask |= (byte)(1 << ((byte)type - 1));
tile.wallNode = true;
index += wallOffsets[(byte)type];
tile = TryGetTile(index);
if (tile == null) {
tile = new VesselTile();
SetTile(index, tile);
}
tile.wallNode = true;
} else {
index += wallOffsets[(byte)type];
}
}
}
public void ByName_NullArgument()
{
Assert.Throws(typeof(ArgumentNullException), () => WallType.ByName(null));
}
void UpdateWallChecks()
{
_wallAboveHandHeight = false;
_wallAtHandHeight = false;
_wallAtCrotchHeight = false;
Vector3 offset = offsets.handOffsetP1;
offset.x *= _direction.x;
Vector3 checkDirection = (offsets.handOffsetP2 - offsets.handOffsetP1) * _direction.x;
Ray handRay = new Ray( _transform.position + offset, checkDirection );
// if there's a wall at hand height
Debug.DrawLine( handRay.origin, handRay.origin + handRay.direction * _ledgeGrabDistance, Color.red );
RaycastHit info;
if ( Physics.Raycast( handRay, out info, _ledgeGrabDistance, _groundLayerMask ) )
{
_wallAtHandHeight = true;
if ( info.transform.tag == "ClimbableWall" )
{
_wallTypeAtHand = WallType.Climbable;
}
else
{
_wallTypeAtHand = WallType.Normal;
}
_wallNormal = info.normal;
_wallIntersectPoint = info.point;
offset = offsets.aboveHandOffset;
offset.x *= _direction.x;
Ray aboveHandRay = new Ray( _transform.position + offset, checkDirection );
Debug.DrawLine( aboveHandRay.origin, aboveHandRay.origin + aboveHandRay.direction * _ledgeGrabDistance, Color.cyan );
if ( !Physics.Raycast( aboveHandRay, out info, _ledgeGrabDistance, _groundLayerMask ) )
{
Vector3 newPos = _transform.position;
newPos.x = info.point.x;
Vector3 testPos = aboveHandRay.origin;
testPos.x = newPos.x + _direction.x * 0.05f;
if ( Physics.Raycast( testPos, Vector3.down, out info, offsets.aboveHandOffset.y - offsets.handOffsetP1.y, _groundLayerMask ) )
{
newPos.y = info.point.y;
}
else
{
Debug.LogWarning("Couldn't find Y position of ledge");
}
_ledgePosition = newPos;
}
else
{
_wallAboveHandHeight = true;
}
offset = offsets.crotchOffset;
offset.x *= _direction.x;
Ray crotchRay = new Ray( _transform.position + offset, checkDirection );
Debug.DrawLine( crotchRay.origin, crotchRay.origin + crotchRay.direction * _ledgeGrabDistance, Color.magenta );
if ( Physics.Raycast( crotchRay, out info, _ledgeGrabDistance, _groundLayerMask ) )
{
_wallAtCrotchHeight = true;
}
}
else
{
_wallAtHandHeight = false;
}
}
/// <summary>
/// Here is a part or our code to start a Revit command.
/// The aim of the code is to set a wall type current in the Revit property window.
/// We only start up the wall command with the API and let the user do the drawing of the wall.
/// This solution can also be used to launch other Revit commands.
/// </summary>
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
IntPtr hRvt = uiapp.MainWindowHandle; // 2019
// Name of target wall type that we want to use:
string wallTypeName = "Generic - 203";
WallType wallType = GetFirstWallTypeNamed(
doc, wallTypeName);
Wall wall = GetFirstWallUsingType(
doc, wallType);
// Select the wall in the UI
//uidoc.Selection.Elements.Add( wall ); // 2014
List <ElementId> ids = new List <ElementId>(1);
ids.Add(wall.Id);
uidoc.Selection.SetElementIds(ids); // 2015
//if( 0 == uidoc.Selection.Elements.Size ) // 2014
if (0 == uidoc.Selection.GetElementIds().Count) // 2015
{
// No wall with the correct wall type found
FilteredElementCollector collector
= new FilteredElementCollector(doc);
Level ll = collector
.OfClass(typeof(Level))
.FirstElement() as Level;
// place a new wall with the
// correct wall type in the project
//Line geomLine = app.Create.NewLineBound( XYZ.Zero, new XYZ( 2, 0, 0 ) ); // 2013
Line geomLine = Line.CreateBound(XYZ.Zero, new XYZ(2, 0, 0)); // 2014
Transaction t = new Transaction(
doc, "Create dummy wall");
t.Start();
//Wall nw = doc.Create.NewWall( geomLine, // 2012
// wallType, ll, 1, 0, false, false );
Wall nw = Wall.Create(doc, geomLine, // 2013
wallType.Id, ll.Id, 1, 0, false, false);
t.Commit();
// Select the new wall in the project
//uidoc.Selection.Elements.Add( nw ); // 2014
ids.Clear();
ids.Add(nw.Id);
uidoc.Selection.SetElementIds(ids); // 2015
// Start command create similar. In the
// property menu, our wall type is set current
Press.Keys(hRvt, "CS");
// Select the new wall in the project,
// so we can delete it
//uidoc.Selection.Elements.Add( nw ); // 2014
ids.Clear();
ids.Add(nw.Id);
uidoc.Selection.SetElementIds(ids); // 2015
// Erase the selected wall (remark:
// doc.delete(nw) may not be used,
// this command will undo)
Press.Keys(hRvt, "DE");
// Start up wall command
Press.Keys(hRvt, "WA");
}
else
{
// The correct wall is already selected:
Press.Keys(hRvt, "CS"); // Start "create similar"
}
return(Result.Succeeded);
}
/// <summary>
/// This function takes an XmlReader the was created from a WALL element in the main file,
/// It then creates a new wall and adds it to the List<Wall>
/// </summary>
/// <param name="wallReader">
/// The XML Reader object created from a wall subtree in the ParseLevel() method
/// </param>
private void ParseWall(XmlReader wallReader)
{
//a point to hold the location from where we add the wall
Point wallLocation = new Point();
//a Walltype to hold the type, set the default to hard
WallType wt = WallType.Hard;
//a Wallshape to hold the shape, default is vertical line
WallShape ws = WallShape.l;
//a string to hold text data parsed from the file
string tempString = "";
//width and height variables
int width = 0, height = 0;
//read to the end
while (wallReader.Read())
{
//check the node type
switch (wallReader.NodeType)
{
///*******************************************************
///Here we parse the WALL subelements into their own parts
///*******************************************************
case XmlNodeType.Element:
//check the tag name and perform the necessary action on it
switch (wallReader.Name)
{
//get the starting X location of the wall
case "X":
wallLocation.X = wallReader.ReadElementContentAsInt();
break;
//get the starting Y location of the wall
case "Y":
wallLocation.Y = wallReader.ReadElementContentAsInt();
break;
//Get the wall type as a string, and then assign the appropriate type based on
//the string
case "TYPE":
tempString = wallReader.ReadElementContentAsString();
if (tempString == "WEAK")
{
wt = WallType.Weak;
}
break;
//Get the shape type. Call the SetWallShape function. It returns the appropriate enum WallShape
case "SHAPE":
tempString = wallReader.ReadElementContentAsString();
ws = SetWallShape(tempString);
break;
//Get the width of the wall
case "WIDTH":
width = wallReader.ReadElementContentAsInt() * Tilesize;
break;
//Get the height of the wall
case "HEIGHT":
height = wallReader.ReadElementContentAsInt() * Tilesize;
//add the walls once we reach the end
AddWalls(wallLocation, wt, ws, width, height);
break;
}
break;
}
}
}
public void SetType(int x, int z, WallType type)
{
mazeData[x, z] = type;
}
private void Stream(ArrayList data, WallType wallType)
{
data.Add(new Snoop.Data.ClassSeparator(typeof(WallType)));
data.Add(new Snoop.Data.Double("Width", wallType.Width));
data.Add(new Snoop.Data.String("Kind", wallType.Kind.ToString()));
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication app = commandData.Application;
Document doc = app.ActiveUIDocument.Document;
#if _2011
//
// code for the Revit 2011 API:
//
Debug.Assert(false,
"Currently, no new wall layer can be created, because"
+ "there is no creation method available for it.");
foreach (WallType wallType in doc.WallTypes)
{
if (0 < wallType.CompoundStructure.Layers.Size)
{
CompoundStructureLayer oldLayer
= wallType.CompoundStructure.Layers.get_Item(0);
WallType newWallType
= wallType.Duplicate("NewWallType") as WallType;
CompoundStructure structure
= newWallType.CompoundStructure;
CompoundStructureLayerArray layers
= structure.Layers;
// from here on, nothing works, as expected:
// in the Revir 2010 API, we could call the constructor
// even though it is for internal use only.
// in 2011, it is not possible to call it either.
CompoundStructureLayer newLayer = null;
// = new CompoundStructureLayer(); // for internal use only
newLayer.DeckProfile = oldLayer.DeckProfile;
//newLayer.DeckUsage = oldLayer.DeckUsage; // read-only
//newLayer.Function = oldLayer.Function; // read-only
newLayer.Material = oldLayer.Material;
newLayer.Thickness = oldLayer.Thickness;
newLayer.Variable = oldLayer.Variable;
layers.Append(newLayer);
}
}
#endif // _2011
using (Transaction t = new Transaction(doc))
{
t.Start("Create New Wall Layer");
//WallTypeSet wallTypes = doc.WallTypes; // 2013
FilteredElementCollector wallTypes
= new FilteredElementCollector(doc)
.OfClass(typeof(WallType)); // 2014
foreach (WallType wallType in wallTypes)
{
if (0 < wallType.GetCompoundStructure().GetLayers().Count)
{
CompoundStructureLayer oldLayer
= wallType.GetCompoundStructure().GetLayers()[0];
WallType newWallType
= wallType.Duplicate("NewWallType") as WallType;
CompoundStructure structure
= newWallType.GetCompoundStructure();
IList <CompoundStructureLayer> layers
= structure.GetLayers();
// in Revit 2012, we can create a new layer:
double width = 0.1;
MaterialFunctionAssignment function = oldLayer.Function;
ElementId materialId = oldLayer.MaterialId;
CompoundStructureLayer newLayer
= new CompoundStructureLayer(width, function, materialId);
layers.Add(newLayer);
structure.SetLayers(layers);
newWallType.SetCompoundStructure(structure);
}
}
t.Commit();
}
return(Result.Succeeded);
}
/// <summary>
/// Return the first wall found that
/// uses the given wall type.
/// </summary>
static Wall GetFirstWallUsingType(
Document doc,
WallType wallType)
{
// built-in parameter storing this
// wall's wall type element id:
BuiltInParameter bip
= BuiltInParameter.ELEM_TYPE_PARAM;
ParameterValueProvider provider
= new ParameterValueProvider(
new ElementId( bip ) );
FilterNumericRuleEvaluator evaluator
= new FilterNumericEquals();
FilterRule rule = new FilterElementIdRule(
provider, evaluator, wallType.Id );
ElementParameterFilter filter
= new ElementParameterFilter( rule );
FilteredElementCollector collector
= new FilteredElementCollector( doc )
.OfClass( typeof( Wall ) )
.WherePasses( filter );
return collector.FirstElement() as Wall;
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication app = commandData.Application;
UIDocument uidoc = app.ActiveUIDocument;
Document doc = uidoc.Document;
//ElementSet a = uidoc.Selection.Elements; // 2014
ICollection <ElementId> ids = uidoc.Selection.GetElementIds(); // 2015
const string newWallTypeName = "NewWallType_with_Width_doubled";
using (Transaction t = new Transaction(doc))
{
t.Start("Duplicate Wall Type");
foreach (ElementId id in ids)
{
Wall wall = doc.GetElement(id) as Wall;
if (null != wall)
{
WallType wallType = wall.WallType;
WallType newWallType = wallType.Duplicate(
newWallTypeName) as WallType;
//CompoundStructureLayerArray layers = newWallType.CompoundStructure.Layers; // 2011
IList <CompoundStructureLayer> layers = newWallType.GetCompoundStructure().GetLayers(); // 2012
foreach (CompoundStructureLayer layer in layers)
{
// double each layer thickness:
//layer.Thickness *= 2.0; // 2011
layer.Width *= 2.0; // 2012
}
// assign the new wall type back to the wall:
wall.WallType = newWallType;
// only process the first wall, if one was selected:
break;
}
}
t.Commit();
}
return(Result.Succeeded);
#region Assign colour
#if ASSIGN_COLOUR
ElementSet elemset = doc.Selection.Elements;
foreach (Element e in elemset)
{
FamilyInstance inst = e as FamilyInstance;
// get the symbol and duplicate it:
FamilySymbol dupSym = inst.Symbol.Duplicate(
"D1") as FamilySymbol;
// access the material:
ElementId matId = dupSym.get_Parameter(
"Material").AsElementId();
Material mat = doc.GetElement(ref matId)
as Autodesk.Revit.Elements.Material;
// change the color of this material:
mat.Color = new Color(255, 0, 0);
// assign the new symbol to the instance:
inst.Symbol = dupSym;
#endif // ASSIGN_COLOUR
#endregion // Assign colour
}
}
