/// <summary>
/// Calculates all Lines making up the given level and puts them into the WallLines dictionary.
/// </summary>
private void CalculateLines(bool[,] levelMap)
{
Lines = new WallToLines();
Generator g = WorldConstants.MatchWrapper.GetComponent <CreateLevel>().LevelGen;
int max = Math.Max(levelMap.GetLength(0), levelMap.GetLength(1));
//Create the lines in each row and column.
for (int n = 0; n < max; ++n)
{
if (n < levelMap.GetLength(0))
{
Line.GetVerticalLines(g.FillData, Lines, n);
}
if (n < levelMap.GetLength(1))
{
Line.GetHorizontalLines(g.FillData, Lines, n);
}
}
//Lengthen each end by half a wall size.
foreach (Line l in Lines.GetAllLines())
{
l.LineRange.Range += 1.0f;
}
//Combine any duplicated lines.
Lines.CombineReferences();
}
/// <summary>
/// Gets all continuous left/right Lines from the given level using all the walls in the given column.
/// The Lines are indexed by all wall bounds that make up part of that indexed Line.
/// </summary>
public static void GetVerticalLines(FillData data, WallToLines associations, int col)
{
int startingY, currentY;
Interval temp;
ColType current;
bool rightCol = (col == data.Map.GetLength(0) - 1);
//Do the algorithm for both the left and the right of the column.
int currentCol;
for (int dir = -1; dir < 2; dir += 2)
{
currentCol = col + dir;
current = (currentCol > col ? ColType.Right : ColType.Left);
//Take care of the edge case where the whole row is a valid line.
bool colFree = true;
for (int j = 0; j < data.Map.GetLength(1); ++j)
{
if (data.GetMapAt(new Location(currentCol, j)) ||
!data.GetMapAt(new Location(col, j)))
{
colFree = false;
break;
}
}
//If the whole column is one line, just use that.
if (colFree)
{
//If the level wraps around, use a large line.
if (data.WrapY)
{
associations.AddReferences(GetBounds(new Line(Orientation.Vertical, new Interval(0, data.Map.GetLength(1) - 1, true, 2), col)),
current,
new Line(Orientation.Vertical, new Interval(-data.Map.GetLength(1), 2.0f * data.Map.GetLength(1), true, 2), (col + currentCol) * 0.5f));
}
else
{
associations.AddReferences(GetBounds(new Line(Orientation.Vertical, new Interval(0, data.Map.GetLength(1) - 1, true, 2), col)),
current,
new Line(Orientation.Vertical, new Interval(0, data.Map.GetLength(1) - 1, true, 2), col));
}
}
//Otherwise, go through one wall at a time and build individual collections of Lines.
else
{
//An edge is a whole Line if it spans an unbroken column of walls with no walls covering the edge.
//Use a counter to run through the whole column in groups of unbroken walls.
startingY = 0;
currentY = 0;
temp = null;
while (startingY < data.Map.GetLength(1))
{
//Get the next valid spot to start from.
while ((!data.GetMapAt(new Location(col, startingY)) ||
data.GetMapAt(new Location(currentCol, startingY))) &&
startingY < data.Map.GetLength(1))
{
currentY += 1;
startingY = currentY;
}
if (startingY >= data.Map.GetLength(1))
{
break;
}
//Keep the counter going as long as the next spot is valid (i.e.
// there is a wall to the side but not in the way).
while (data.GetMapAt(new Location(col, currentY + 1)) &&
!data.GetMapAt(new Location(currentCol, currentY + 1)) &&
currentY < data.Map.GetLength(1))
{
currentY += 1;
}
//Now make the line.
temp = new Interval(startingY, currentY, true, 2);
associations.AddReferences(GetBounds(new Line(Orientation.Vertical, temp, col)),
current,
new Line(Orientation.Vertical, temp, (col + currentCol) * 0.5f));
//If this is near the top, wrap it around to the bottom.
if (data.WrapY && temp.Start < 2.0f)
{
associations.AddReferences(GetBounds(new Line(Orientation.Vertical, temp + data.WorldSize.Y, col)),
current,
new Line(Orientation.Vertical, temp + data.WorldSize.Y, (col + currentCol) * 0.5f));
}
//Move to the next spot in the column.
startingY = currentY + 1;
currentY = startingY;
}
//If the level wraps around in the Y, take the last Line and wrap it around.
if (temp != null && data.WrapY)
{
associations.AddReferences(GetBounds(new Line(Orientation.Vertical, temp - data.WorldSize.Y, col)),
current,
new Line(Orientation.Vertical, temp - data.WorldSize.Y, (col + currentCol) * 0.5f));
}
}
}
}
/// <summary>
/// Gets all continuous top/bottom Lines from the given level using all the walls in the given row.
/// The Lines are indexed by all wall bounds that make up part of that indexed Line.
/// </summary>
public static void GetHorizontalLines(FillData data, WallToLines associations, int row)
{
int startingX, currentX;
Interval temp;
ColType current;
bool bottomRow = (row == data.Map.GetLength(1) - 1);
//Do the algorithm for both above and below the row.
int currentRow;
for (int dir = -1; dir < 2; dir += 2)
{
currentRow = row + dir;
current = (currentRow < row ? ColType.Bottom : ColType.Top);
//There is one special case: the whole row is a valid line.
bool rowFree = true;
for (int i = 0; i < data.Map.GetLength(0); ++i)
{
if (data.GetMapAt(new Location(i, currentRow)) ||
!data.GetMapAt(new Location(i, row)))
{
rowFree = false;
break;
}
}
//If the whole row is one line, just use that.
if (rowFree)
{
//If the level wraps around, use a large line.
if (data.WrapX)
{
associations.AddReferences(GetBounds(new Line(Orientation.Horizontal, new Interval(0, data.Map.GetLength(0) - 1, true, 2), row)),
current,
new Line(Orientation.Horizontal, new Interval(-data.Map.GetLength(0), 2.0f * data.Map.GetLength(0), true, 2), (row + currentRow) * 0.5f));
}
else
{
associations.AddReferences(GetBounds(new Line(Orientation.Horizontal, new Interval(0, data.Map.GetLength(0) - 1, true, 2), row)),
current,
new Line(Orientation.Horizontal, new Interval(0, data.Map.GetLength(0) - 1, true, 2), row));
}
}
//Otherwise, go through one wall at a time and build individual collections of Lines.
else
{
//An edge is a whole Line if it spans an unbroken row of walls with no walls covering the edge.
//Use a counter to run through the whole row in groups of unbroken rows.
startingX = 0;
currentX = 0;
temp = null;
while (startingX < data.Map.GetLength(0))
{
//Get the next valid spot to start from.
while ((!data.GetMapAt(new Location(startingX, row)) ||
data.GetMapAt(new Location(startingX, currentRow))) &&
startingX < data.Map.GetLength(0))
{
currentX += 1;
startingX = currentX;
}
if (startingX >= data.Map.GetLength(0))
{
break;
}
//Keep the counter going as long as the next spot is valid (i.e.
// there is a wall in this row but not above/underneath).
while (data.GetMapAt(new Location(currentX + 1, row)) &&
!data.GetMapAt(new Location(currentX + 1, currentRow)) &&
currentX < data.Map.GetLength(0))
{
currentX += 1;
}
//Now make the line.
temp = new Interval(startingX, currentX, true, 2);
associations.AddReferences(GetBounds(new Line(Orientation.Horizontal, temp, row)),
current,
new Line(Orientation.Horizontal, temp, (row + currentRow) * 0.5f));
//If this is near the left, wrap it around to the right.
if (data.WrapX && temp.Start < 2.0f)
{
associations.AddReferences(GetBounds(new Line(Orientation.Horizontal, temp + data.WorldSize.X, row)),
current,
new Line(Orientation.Horizontal, temp + data.WorldSize.X, (row + currentRow) * 0.5f));
}
//Move to the next spot in the row.
startingX = currentX + 1;
currentX = startingX;
}
//If the level wraps around in the X, take the last Line and wrap it around.
if (temp != null && data.WrapX)
{
associations.AddReferences(GetBounds(new Line(Orientation.Horizontal, temp - data.WorldSize.X, row)),
current,
new Line(Orientation.Horizontal, temp - data.WorldSize.X, (row + currentRow) * 0.5f));
}
}
}
}
