public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
IList <double> wallthicknessList = new List <double>();
XYZ normal = new XYZ(0, 0, 1);
string previous = null;
double previousWidth = 0;
SpatialElementBoundaryOptions seb_opt = new SpatialElementBoundaryOptions();
FilteredElementCollector levels = new FilteredElementCollector(doc).OfClass(typeof(Level));
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create cropped views for each room");
string date_iso = DateTime.Now.ToString("yyyy-MM-dd");
foreach (Level level in levels)
{
Debug.Print(level.Name);
ElementId id_view = level.FindAssociatedPlanViewId();
ViewPlan view = doc.GetElement(id_view) as ViewPlan;
IEnumerable <Room> rooms = new FilteredElementCollector(doc, id_view).OfClass(typeof(SpatialElement)).Where <Element>(e => e is Room).Cast <Room>();
foreach (Room room in rooms)
{
wallthicknessList.Clear();
string view_name = string.Format("{0}_cropped_to_room_{1}_date_{2}", view.Name, room.Name, date_iso);
id_view = view.Duplicate(ViewDuplicateOption.AsDependent);
View view_cropped = doc.GetElement(id_view) as View;
view_cropped.Name = view_name;
IList <IList <BoundarySegment> > sloops = room.GetBoundarySegments(seb_opt);
if (null == sloops) // the room may not be bound
{
continue;
}
CurveLoop loop = null;
foreach (IList <BoundarySegment> sloop in sloops)
{
loop = new CurveLoop();
foreach (BoundarySegment s in sloop)
{
loop.Append(s.GetCurve());
ElementType type = doc.GetElement(s.ElementId) as ElementType;
Element elem = doc.GetElement(s.ElementId);
//Error when wall width varies across length
//if (elem is Wall)
//{
// Wall wall = elem as Wall;
// wallthicknessList.Add(wall.Width*1.1);
//}
//else
//{
// //Room separator
// //Any other exceptions to walls need including??
// wallthicknessList.Add(0);
//}
if (elem != null)//The elem == null is due to room separators. Are there going to be any others?
{
if (firstPass)
{
if ((BuiltInCategory)elem.Category.Id.IntegerValue == BuiltInCategory.OST_Walls)
{
Wall wall = elem as Wall;
//Is there a better way of identifying Orientation (predominantly horizontal or Vertical) What if walls at 45 deg?
if (Math.Abs(Math.Round(wall.Orientation.Y, 0)) == 1)
{
previous = "Y";
}
else
{
previous = "X";
}
firstPass = false;
wallthicknessList.Add(wall.Width + 0.1);
previousWidth = wall.Width + 0.1;
}
//Are there any other situations need taking account off?
else if ((BuiltInCategory)elem.Category.Id.IntegerValue == BuiltInCategory.OST_RoomSeparationLines)
{
//Room separator
Autodesk.Revit.DB.Options opt = new Options();
Autodesk.Revit.DB.GeometryElement geomElem = elem.get_Geometry(opt);
foreach (GeometryObject geomObj in geomElem)
{
Line line = geomObj as Line;
//Is there a better way of identifying Orientation (predominantly horizontal or Vertical) What if walls at 45 deg?
if (0 - line.GetEndPoint(1).X - line.GetEndPoint(0).X > 0 - line.GetEndPoint(1).Y - line.GetEndPoint(0).Y)
{
previous = "Y";
}
else
{
previous = "X";
}
firstPass = false;
wallthicknessList.Add(0.1);
previousWidth = 0.1;
}
}
}
else
{
if ((BuiltInCategory)elem.Category.Id.IntegerValue == BuiltInCategory.OST_Walls)
{
Wall wall = elem as Wall;
if (Math.Abs(Math.Round(wall.Orientation.Y, 0)) == 1 && previous == "Y")
{
if (wall.Width > previousWidth)
{
//This would appear to avoid the Cannot properly trim error
//How to allow for more than two wall thickness changes within the same length?
//How to not require this and just offset wall widths?
wallthicknessList[wallthicknessList.Count - 1] = wall.Width + 0.1;
}
wallthicknessList.Add(wall.Width + 0.1);
previousWidth = wall.Width + 0.1;
previous = "Y";
}
else if (Math.Abs(Math.Round(wall.Orientation.X, 0)) == 1 && previous == "X")
{
if (wall.Width > previousWidth)
{
//This would appear to avoid the Cannot properly trim error
//How to allow for more than two wall thickness changes within the same length?
//How to not require this and just offset wall widths?
wallthicknessList[wallthicknessList.Count - 1] = wall.Width + 0.1;
}
wallthicknessList.Add(wall.Width + 0.1);
previousWidth = wall.Width + 0.1;
previous = "X";
}
else
{
if (Math.Abs(Math.Round(wall.Orientation.Y, 0)) == 1)
{
previous = "Y";
}
else if (Math.Abs(Math.Round(wall.Orientation.X, 0)) == 1)
{
previous = "X";
}
wallthicknessList.Add(wall.Width + 0.1);
previousWidth = wall.Width + 0.1;
}
}
else if ((BuiltInCategory)elem.Category.Id.IntegerValue == BuiltInCategory.OST_RoomSeparationLines)//Any other situations need taking account of?
{
//Room separator
Autodesk.Revit.DB.Options opt = new Options();
Autodesk.Revit.DB.GeometryElement geomElem = elem.get_Geometry(opt);
foreach (GeometryObject geomObj in geomElem)
{
Line line = geomObj as Line;
//Is there a better way of identifying Orientation (predominantly horizontal or Vertical) What if walls at 45 deg?
if (0 - line.GetEndPoint(1).X - line.GetEndPoint(0).X > 0 - line.GetEndPoint(1).Y - line.GetEndPoint(0).Y)
{
previous = "Y";
}
else
{
previous = "X";
}
wallthicknessList.Add(previousWidth);
//Error "cannot trim"
//wallthicknessList.Add(0.1);
previousWidth = 0.1;
}
}
}
}
else
{
wallthicknessList.Add(-0.1);
}
}
// Skip out after first sloop - ignore
// rooms with holes and disjunct parts
break;
}
CurveLoop loop2 = CurveLoop.CreateViaOffset(loop, wallthicknessList, normal);
CurveLoop newloop = new CurveLoop();
foreach (Curve curve in loop2)
{
List <XYZ> points = curve.Tessellate().ToList();
for (int ip = 0; ip < points.Count - 1; ip++)
{
Line l = Line.CreateBound(points[ip], points[ip + 1]);
newloop.Append(l);
}
}
ViewCropRegionShapeManager vcrs_mgr = view_cropped.GetCropRegionShapeManager();
bool valid = vcrs_mgr.IsCropRegionShapeValid(newloop);
if (valid)
{
view_cropped.CropBoxVisible = true;
view_cropped.CropBoxActive = true;
vcrs_mgr.SetCropShape(newloop);
}
}
}
tx.Commit();
}
return(Result.Succeeded);
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
SpatialElementBoundaryOptions seb_opt
= new SpatialElementBoundaryOptions();
FilteredElementCollector levels
= new FilteredElementCollector(doc)
.OfClass(typeof(Level));
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create cropped views for each room");
string date_iso = DateTime.Now.ToString("yyyy-MM-dd");
foreach (Level level in levels)
{
Debug.Print(level.Name);
ElementId id_view = level.FindAssociatedPlanViewId();
ViewPlan view = doc.GetElement(id_view) as ViewPlan;
IEnumerable <Room> rooms
= new FilteredElementCollector(doc, id_view)
.OfClass(typeof(SpatialElement))
.Where <Element>(e => e is Room)
.Cast <Room>();
foreach (Room room in rooms)
{
string view_name = string.Format(
"{0}_cropped_to_room_{1}_date_{2}",
view.Name, room.Name, date_iso);
id_view = view.Duplicate(
ViewDuplicateOption.AsDependent);
View view_cropped = doc.GetElement(
id_view) as View;
view_cropped.Name = view_name;
IList <IList <BoundarySegment> > sloops
= room.GetBoundarySegments(seb_opt);
if (null == sloops) // the room may not be bounded
{
continue;
}
CurveLoop room_outer_loop
= GetOuterLoopOfRoomFromCreateViaOffset(
view_cropped, sloops);
//ViewCropRegionShapeManager vcrs_mgr
// = view_cropped.GetCropRegionShapeManager();
//bool valid = vcrs_mgr.IsCropRegionShapeValid(
// room_outer_loop );
//if( valid )
//{
// view_cropped.CropBoxVisible = true;
// view_cropped.CropBoxActive = true;
// vcrs_mgr.SetCropShape( room_outer_loop );
//}
}
}
tx.Commit();
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
IList <double> wallthicknessList = new List <double>();
XYZ normal = new XYZ(0, 0, 1);
SpatialElementBoundaryOptions seb_opt = new SpatialElementBoundaryOptions();
FilteredElementCollector levels = new FilteredElementCollector(doc).OfClass(typeof(Level));
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create cropped views for each room");
string date_iso = DateTime.Now.ToString("yyyy-MM-dd");
foreach (Level level in levels)
{
wallthicknessList.Clear();
Debug.Print(level.Name);
ElementId id_view = level.FindAssociatedPlanViewId();
ViewPlan view = doc.GetElement(id_view) as ViewPlan;
IEnumerable <Room> rooms = new FilteredElementCollector(doc, id_view).OfClass(typeof(SpatialElement)).Where <Element>(e => e is Room).Cast <Room>();
foreach (Room room in rooms)
{
wallthicknessList.Clear();
string view_name = string.Format("{0}_cropped_to_room_{1}_date_{2}", view.Name, room.Name, date_iso);
id_view = view.Duplicate(ViewDuplicateOption.AsDependent);
View view_cropped = doc.GetElement(id_view) as View;
view_cropped.Name = view_name;
IList <IList <BoundarySegment> > sloops = room.GetBoundarySegments(seb_opt);
if (null == sloops) // the room may not be bound
{
continue;
}
CurveLoop loop = null;
foreach (IList <BoundarySegment> sloop in sloops)
{
loop = new CurveLoop();
foreach (BoundarySegment s in sloop)
{
loop.Append(s.GetCurve());
ElementType type = doc.GetElement(s.ElementId) as ElementType;
Element elem = doc.GetElement(s.ElementId);
if (elem is Wall)
{
Wall wall = elem as Wall;
wallthicknessList.Add(wall.Width);
}
else
{
//Room separator
//Any other exceptions to walls need including??
wallthicknessList.Add(0);
}
}
// Skip out after first sloop - ignore
// rooms with holes and disjunct parts
break;
}
CurveLoop loop2 = CurveLoop.CreateViaOffset(loop, wallthicknessList, normal);
CurveLoop newloop = new CurveLoop();
foreach (Curve curve in loop2)
{
List <XYZ> points = curve.Tessellate().ToList();
for (int ip = 0; ip < points.Count - 1; ip++)
{
Line l = Line.CreateBound(points[ip], points[ip + 1]);
newloop.Append(l);
}
}
ViewCropRegionShapeManager vcrs_mgr = view_cropped.GetCropRegionShapeManager();
bool valid = vcrs_mgr.IsCropRegionShapeValid(newloop);
if (valid)
{
view_cropped.CropBoxVisible = true;
view_cropped.CropBoxActive = true;
vcrs_mgr.SetCropShape(newloop);
}
}
}
tx.Commit();
}
return(Result.Succeeded);
}
public static List <ViewPlan> DuplicateViewPlan(this ViewPlan viewPlan, IEnumerable <Level> levels = null, bool useExisting = false)
{
if (viewPlan == null || !viewPlan.IsValidObject || viewPlan.IsTemplate)
{
return(null);
}
Document document = viewPlan.Document;
if (document == null)
{
return(null);
}
List <Level> levels_Temp = null;
if (levels != null)
{
levels_Temp = new List <Level>(levels);
}
if (levels_Temp == null)
{
levels_Temp = new FilteredElementCollector(document).OfClass(typeof(Level)).Cast <Level>().ToList();
}
List <Element> elements_ColorFillLegend = new FilteredElementCollector(document, viewPlan.Id).OfCategory(BuiltInCategory.OST_ColorFillLegends).ToList();
List <ViewPlan> result = new List <ViewPlan>();
foreach (Level level in levels_Temp)
{
if (level.Id == viewPlan.GenLevel.Id)
{
continue;
}
ViewPlan viewPlan_New = null;
List <ViewPlan> viewPlans = new FilteredElementCollector(document).OfClass(typeof(ViewPlan)).Cast <ViewPlan>().ToList();
string name = level.Name;
if (useExisting)
{
viewPlan_New = viewPlans.Find(x => x.Name == name);
}
if (viewPlan_New == null)
{
viewPlan_New = ViewPlan.Create(document, viewPlan.GetTypeId(), level.Id);
// Check name uniqueness
string name_Temp = name;
int count = 0;
while (viewPlans.Find(x => x.Name == name_Temp) != null)
{
count++;
name_Temp = string.Format("{0} {1}", name, count);
}
viewPlan_New.Name = name_Temp;
}
foreach (Parameter parameter in viewPlan.ParametersMap)
{
if (parameter.Id.IntegerValue == (int)BuiltInParameter.VIEW_NAME)
{
continue;
}
Definition definition = parameter?.Definition;
if (definition == null)
{
continue;
}
Parameter parameter_New = viewPlan_New.get_Parameter(parameter.Definition);
if (parameter_New == null)
{
continue;
}
CopyValue(parameter, parameter_New);
}
if (elements_ColorFillLegend != null && elements_ColorFillLegend.Count != 0)
{
ElementTransformUtils.CopyElements(viewPlan, elements_ColorFillLegend.ConvertAll(x => x.Id), viewPlan_New, null, new CopyPasteOptions());
}
result.Add(viewPlan_New);
IEnumerable <ElementId> elementIds_Dependent = viewPlan.GetDependentViewIds();
if (elementIds_Dependent != null && elementIds_Dependent.Count() != 0)
{
foreach (ElementId elementId_Dependent in elementIds_Dependent)
{
ViewPlan viewPlan_Dependent = document.GetElement(elementId_Dependent) as ViewPlan;
if (viewPlan_Dependent == null)
{
continue;
}
viewPlans = new FilteredElementCollector(document).OfClass(typeof(ViewPlan)).Cast <ViewPlan>().ToList();
string name_Dependent = name;
if (viewPlan_Dependent.Name.StartsWith(viewPlan.Name))
{
name_Dependent = level.Name + viewPlan_Dependent.Name.Substring(viewPlan.Name.Length);
}
else
{
Element scopeBox = viewPlan_Dependent.ScopeBox();
if (scopeBox != null)
{
name_Dependent = level.Name + " - " + scopeBox.Name;
}
}
ViewPlan viewPlan_Dependent_New = null;
if (useExisting)
{
viewPlan_Dependent_New = viewPlans.Find(x => x.Name == name_Dependent);
}
if (viewPlan_Dependent_New == null)
{
ElementId elementId_Dependent_New = viewPlan_New.Duplicate(ViewDuplicateOption.AsDependent);
if (elementId_Dependent_New == null || elementId_Dependent_New == ElementId.InvalidElementId)
{
continue;
}
viewPlan_Dependent_New = document.GetElement(elementId_Dependent_New) as ViewPlan;
if (viewPlan_Dependent_New == null)
{
continue;
}
// Check name uniqueness
string name_Dependent_Temp = name_Dependent;
int count = 0;
while (viewPlans.Find(x => x.Name == name_Dependent_Temp) != null)
{
count++;
name_Dependent_Temp = string.Format("{0} {1}", name_Dependent, count);
}
viewPlan_Dependent_New.Name = name_Dependent_Temp;
}
foreach (Parameter parameter in viewPlan_Dependent.ParametersMap)
{
if (parameter.Id.IntegerValue == (int)BuiltInParameter.VIEW_NAME)
{
continue;
}
Definition definition = parameter?.Definition;
if (definition == null)
{
continue;
}
Parameter parameter_New = viewPlan_Dependent_New.get_Parameter(parameter.Definition);
if (parameter_New == null)
{
continue;
}
CopyValue(parameter, parameter_New);
}
result.Add(viewPlan_Dependent_New);
}
}
}
return(result);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIDocument uiDoc = commandData.Application.ActiveUIDocument;
Document doc = commandData.Application.ActiveUIDocument.Document;
ViewPlan activeview = uiDoc.ActiveView as ViewPlan;
if (activeview == null)
{
TaskDialog.Show("wrong", "请在平面视图内运行."); return(Result.Failed);
}
Parameter para = activeview.LookupParameter("VIEW-Content");
if (para == null)
{
TaskDialog.Show("wrong", "未找到VIEW-Content参数"); return(Result.Failed);
}
//找到提资视图样板
ViewPlan template = null;
FilteredElementCollector collector_template = new FilteredElementCollector(doc);
collector_template.OfClass(typeof(ViewPlan));
IEnumerable <ViewPlan> templates =
from ele in collector_template
let view = ele as ViewPlan
where view.Name.Equals("A-PLAN-MECH-INTF")
where view.IsTemplate
select view;
if (templates != null && templates.Count() != 0)
{
template = templates.First();
}
//找到所有的非建筑链接文件
FilteredElementCollector linkcollector = new FilteredElementCollector(doc);
linkcollector.OfCategory(BuiltInCategory.OST_RvtLinks).WhereElementIsNotElementType();
IEnumerable <RevitLinkInstance> links = from ele in linkcollector
let ins = ele as RevitLinkInstance
let name = ins.Name
where name[0] != 'A'
select ins;
//获取所有PLOT视图
List <ViewPlan> plots = GetPLOT(doc);
if (plots.Count() == 0)
{
TaskDialog.Show("wrong", "未找到PLOT视图.确认视图名称内含PLOT,并且VIEW-Content参数设置为02.PLOT"); return(Result.Failed);
}
//让用户选择哪几个PLOT视图需要生成INTF视图.
List <ViewPlan> plots_selected = new List <ViewPlan>();
MyWindow window = new MyWindow();
window.listbox.ItemsSource = plots;
if (window.ShowDialog() == true)
{
var objs = window.listbox.SelectedItems;
foreach (Object obj in objs)
{
plots_selected.Add(obj as ViewPlan);
}
}
if (plots_selected.Count == 0)
{
return(Result.Failed);
}
//记录对应的intf视图.
List <ViewPlan> intfs = new List <ViewPlan>();
//记录没有对应intf视图的plot视图.
List <ViewPlan> plots_withoutintf = new List <ViewPlan>();
string name_intfs = " ";
foreach (ViewPlan plot in plots_selected)
{
ViewPlan intf = FindINTFByPLOT(plot);
if (intf == null)
{
plots_withoutintf.Add(plot);
}
else
{
intfs.Add(intf);
name_intfs = name_intfs + "\n" + intf.Name;
}
}
name_intfs += "\n以上INTF视图已生成,将删除现有视图并重新生成.其间可能出现Revit未响应的情况,请不要惊慌,去倒杯茶回来就好了.";
if (intfs.Count != 0)
{
TaskDialog.Show("goa", name_intfs);
}
//预先设置视图样板,以保证后面copy 2D图元的时候减少错误的发生.
if (template != null)
{
using (Transaction transaction_settemplate = new Transaction(doc))
{
transaction_settemplate.Start("set template");
foreach (View intf in intfs)
{
intf.ViewTemplateId = template.Id;
}
transaction_settemplate.Commit();
}
}
//开启事务 将PLOT的2D图元更新到INTF
using (Transaction transaction_delete2D = new Transaction(doc))
{
transaction_delete2D.Start("delete 2d ");
List <ElementId> deleteids = new List <ElementId>();
foreach (ViewPlan intf in intfs)
{
deleteids.AddRange(FindAll2DElmentIds(intf));
}
doc.Delete(deleteids);
transaction_delete2D.Commit();
}
using (Transaction transaction_copy2D = new Transaction(doc))
{
transaction_copy2D.Start("copy 2d ");
string errinfo = "以下图元在无法复制:";
foreach (ViewPlan intf in intfs)
{
ViewPlan plot = FindPLOTByINTF(intf);
if (plot == null)
{
continue;
}
List <ElementId> ids_2D = FindAll2DElmentIds(plot);
Transform transform = ElementTransformUtils.GetTransformFromViewToView(plot, intf);
//ElementTransformUtils.CopyElements(plot, ids_2D, intf, transform, new CopyPasteOptions());
foreach (ElementId id in ids_2D)
{
List <ElementId> ids = new List <ElementId>();
ids.Add(id);
try
{
ElementTransformUtils.CopyElements(plot, ids, intf, transform, new CopyPasteOptions());
}
catch
{
errinfo = errinfo + "\n ID:" + id.IntegerValue + "类别:" + doc.GetElement(id).Category.Name;
continue;
}
}
}
TaskDialog.Show("goa", errinfo);
transaction_copy2D.Commit();
}
//开启事务 带细节复制plot视图
using (Transaction transaction_duplicate = new Transaction(doc))
{
transaction_duplicate.Start("带细节复制plot视图");
foreach (ViewPlan plot in plots_withoutintf)
{
ElementId id_newintf = plot.Duplicate(ViewDuplicateOption.WithDetailing);
ViewPlan newintf = doc.GetElement(id_newintf) as ViewPlan;
//重命名视图名字
newintf.Name = plot.Name.Replace("PLOT", "INTF");
//共享参数VIEW-Content中 PLOT修改为INTF
Parameter view_content = newintf.LookupParameter("VIEW-Content");
view_content.Set("03.INTF");
}
transaction_duplicate.Commit();
}
string wrong = "以下PLOT视图似乎存在问题,请手动进行提资操作.";
using (Transaction transaction = new Transaction(doc))
{
transaction.Start("deal");
foreach (ViewPlan plot in plots_selected)
{
ViewPlan intf = FindINTFByPLOT(plot);
if (intf == null)
{
wrong = wrong + "\n" + plot.Name; continue;
}
HideHDDNTextNote(intf);
HideHDDNAnnotation(intf);
HideANNODimension(intf);
//应用视图样板
if (template != null)
{
intf.ViewTemplateId = template.Id;
}
//关闭非建筑链接
List <ElementId> links_tohidden = new List <ElementId>();
foreach (RevitLinkInstance rli in links)
{
if (rli == null)
{
continue;
}
if (rli.CanBeHidden(intf))
{
links_tohidden.Add(rli.Id);
}
}
intf.HideElements(links_tohidden);
}
transaction.Commit();
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
_uiapp = commandData.Application;
_uidoc = _uiapp.ActiveUIDocument;
_doc = _uidoc.Document;
try
{
// Get list of all structural levels
IList <Level> strLevels = GetAllLevels(_doc, true, true);
if (strLevels.Count == 0)
{
return(Result.Cancelled);
}
// Get list of all zone de définition
IList <Element> zoneList = GetAllBuildingZones(_doc);
if (zoneList.Count == 0)
{
return(Result.Cancelled);
}
int zoneCount = zoneList.Count; // Num of duplicata
// Get the selected view
ICollection <ElementId> refIds = _uidoc.Selection.GetElementIds();
if (refIds.Count == 0)
{
TaskDialog.Show("Revit", "Selecionner au moins d'une vue à dupliquer");
return(Result.Cancelled);
}
foreach (ElementId refId in refIds)
{
Element ele = _doc.GetElement(refId);
if (ele.Category == null || !ele.Category.Name.Equals(Properties.Settings.Default.CATEGORY_NAME_VIEW))
{
TaskDialog.Show("Revit", "Les élément selectionnés doivent être des VUES");
return(Result.Cancelled);
}
View view = ele as View;
ViewFamilyType viewType = _doc.GetElement(view.GetTypeId()) as ViewFamilyType;
if (!viewType.FamilyName.Equals(Properties.Settings.Default.FAMILY_TYPE_NAME_STR_PLAN))
{
TaskDialog.Show("Revit", $"Les élément selectionnés doivent être des VUES EN PLAN");
return(Result.Cancelled);
}
}
foreach (ElementId refId in refIds)
{
ViewPlan viewToDuplicate = _doc.GetElement(refId) as ViewPlan;
Level level = viewToDuplicate.GenLevel;
String levelName = level.Name;
Transaction t = new Transaction(_doc, "Duplicate view");
t.Start();
for (int i = 0; i < zoneCount; i++)
{
ElementId viewId = viewToDuplicate.Duplicate(ViewDuplicateOption.AsDependent);
ViewPlan duplicatedView = _doc.GetElement(viewId) as ViewPlan;
duplicatedView.Name = $"{levelName} - {zoneList[i].Name}";
duplicatedView.get_Parameter(BuiltInParameter.VIEWER_VOLUME_OF_INTEREST_CROP).Set(zoneList[i].Id);
// Associate level to the new viewplan
AssociateLevelToNewViewPlan(level, duplicatedView);
}
t.Commit();
}
return(Result.Succeeded);
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
return(Result.Cancelled);
}
}