///<summary>Creates patients with billing cycle day. Sets BillingUseBillingCycleDay preference to true. Creates an UpdateHistory
///entry for version 16.1.1.0. Deletes all current repeat charges.</summary>
public Patient CreatePatForRepeatCharge(string suffix, int billingCycleDay)
{
Patient pat = PatientT.CreatePatient(suffix);
Patient patOld = pat.Copy();
pat.BillingCycleDay = billingCycleDay;
Patients.Update(pat, patOld);
PrefT.UpdateBool(PrefName.BillingUseBillingCycleDay, true);
UpdateHistoryT.CreateUpdateHistory("16.1.1.0");
Prefs.RefreshCache();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
listRepeatingCharges.ForEach(x => RepeatCharges.Delete(x));
return(pat);
}
public void Legacy_TestFiftySix()
{
//Repeat charges should not be posted before the start date.
string suffix = "56";
Patient pat = PatientT.CreatePatient(suffix);
Patient patOld = pat.Copy();
pat.BillingCycleDay = 15;
Patients.Update(pat, patOld);
Prefs.UpdateBool(PrefName.BillingUseBillingCycleDay, true);
UpdateHistoryT.CreateUpdateHistory("16.1.1.0");
Prefs.RefreshCache();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
listRepeatingCharges.ForEach(x => RepeatCharges.Delete(x));
DateTime dateRun = new DateTime(2015, 12, 15);
List <int> listFailedTests = new List <int>();
//Subtest 1 ===============================================================
//The date start is the same as the date ran and the same as the billing day. Add a procedure that day.
RepeatCharge rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 12, 15);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
List <Procedure> procs = Procedures.Refresh(pat.PatNum);
if (procs.Count != 1 || procs.FindAll(x => x.ProcDate.ToShortDateString() == "12/15/2015" && x.ProcFee == 99).Count != 1)
{
listFailedTests.Add(1);
}
//Subtest 2 ===============================================================
//The start date is the same as the date ran but the billing day is three days earlier. Don't add a procedure that day.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
patOld = pat.Copy();
pat.BillingCycleDay = 12;
Patients.Update(pat, patOld);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 12, 15);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
if (procs.Count != 0)
{
listFailedTests.Add(2);
}
//Subtest 3 ===============================================================
//The start date is the same as the billing day but is three days after the date ran. Don't add a procedure that day.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
patOld = pat.Copy();
pat.BillingCycleDay = 15;
Patients.Update(pat, patOld);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 12, 18);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
if (procs.Count != 0)
{
listFailedTests.Add(3);
}
Assert.AreEqual(0, listFailedTests.Count);
}
public void Legacy_TestFiftyThree()
{
//Repeat charges should be added after the stop date if the duration of the repeating charge if the number of charges added to the account is
//less than the number of months the repeat charge was active (a partial month is counted as a full month).
string suffix = "53";
Patient pat = PatientT.CreatePatient(suffix);
Patient patOld = pat.Copy();
pat.BillingCycleDay = 11;
Patients.Update(pat, patOld);
Prefs.UpdateBool(PrefName.BillingUseBillingCycleDay, true);
UpdateHistoryT.CreateUpdateHistory("16.1.1.0");
Prefs.RefreshCache();
//delete all existing repeating charges
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
listRepeatingCharges.ForEach(x => RepeatCharges.Delete(x));
DateTime dateRun = new DateTime(2015, 12, 15);
//Subtest 1 =====================================================
//The start day is before the stop day which is before the billing day. Add a charge after the stop date.
RepeatCharge rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750"; //arbitrary code
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 11, 8);
rc.DateStop = new DateTime(2015, 12, 9);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
List <Procedure> procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(2, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 12, 11)));
//Subtest 2 =====================================================
//The start day is after the billing day which is after the stop day. Add a charge after the stop date.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 10, 25);
rc.DateStop = new DateTime(2015, 12, 1);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(2, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 12, 11)));
//Subtest 3 =====================================================
//The start day is the same as the stop day but before the billing day. Add a charge after the stop date.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 11, 10);
rc.DateStop = new DateTime(2015, 12, 10);
RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(2, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 12, 11)));
//Subtest 4 =====================================================
//The start day is the same as the stop day and the billing day. Don't add a charge after the stop date.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
dateRun = new DateTime(2015, 11, 15);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 10, 11);
rc.DateStop = new DateTime(2015, 11, 11);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(2, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 10, 11)));
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
//Subtest 5 =====================================================
//The start day is after the stop day which is after the billing day. Don't add a charge after the stop date.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 10, 15);
rc.DateStop = new DateTime(2015, 11, 13);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
Procedure p = new Procedure();
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(1, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
//Subtest 6 =====================================================
//The start day is before billing day which is before the stop day. Don't add a charge after the stop date.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 11, 05);
rc.DateStop = new DateTime(2015, 11, 20);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
Assert.AreEqual(1, procs.Count);
Assert.AreEqual(1, procs.Count(x => x.ProcDate == new DateTime(2015, 11, 11)));
}
public void Legacy_TestFiftyFive()
{
//Changing the amount or start date on a repeat charge should not cause the repeat charge to be added again.
string suffix = "55";
Patient pat = PatientT.CreatePatient(suffix);
Patient patOld = pat.Copy();
pat.BillingCycleDay = 11;
Patients.Update(pat, patOld);
Prefs.UpdateBool(PrefName.BillingUseBillingCycleDay, true);
UpdateHistoryT.CreateUpdateHistory("16.1.1.0");
Prefs.RefreshCache();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
listRepeatingCharges.ForEach(x => RepeatCharges.Delete(x));
DateTime dateRun = new DateTime(2015, 12, 15);
List <int> listFailedTests = new List <int>();
//Subtest 1 ===============================================================
//Run the repeat charge tool. Change the charge amount on the repeat charge. Run the repeat charge tool again. Make sure that no
//extra procedures are added.
RepeatCharge rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 11, 1);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
rc.ChargeAmt = 80;
RepeatCharges.Update(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
List <Procedure> procs = Procedures.Refresh(pat.PatNum);
if (procs.Count != 2 ||
procs.FindAll(x => x.ProcDate.ToShortDateString() == "11/11/2015" && x.ProcFee == 99).Count != 1 ||
procs.FindAll(x => x.ProcDate.ToShortDateString() == "12/11/2015" && x.ProcFee == 99).Count != 1)
{
listFailedTests.Add(1);
}
//Subtest 2 ===============================================================
//Run the repeat charge tool. Change the start date on the repeat charge. Run the repeat charge tool again. Make sure that no
//extra procedures are added.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(2015, 11, 1);
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
rc.DateStart = new DateTime(2015, 11, 2);
RepeatCharges.Update(rc);
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
if (procs.Count != 2 ||
procs.FindAll(x => x.ProcDate.ToShortDateString() == "11/11/2015" && x.ProcFee == 99).Count != 1 ||
procs.FindAll(x => x.ProcDate.ToShortDateString() == "12/11/2015" && x.ProcFee == 99).Count != 1)
{
listFailedTests.Add(2);
}
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.Delete(rc);
Assert.AreEqual(0, listFailedTests.Count);
}
public void Legacy_TestFiftyFour()
{
//When there are multiple repeat charges on one account and the repeat charge tool is run, and then a procedure from the account is deleted,
//and then the repeat charges tool is run again, the same number of procedures that were deleted should be added.
string suffix = "54";
Patient pat = PatientT.CreatePatient(suffix);
Patient patOld = pat.Copy();
pat.BillingCycleDay = 11;
Patients.Update(pat, patOld);
PrefT.UpdateBool(PrefName.BillingUseBillingCycleDay, true);
PrefT.UpdateBool(PrefName.FutureTransDatesAllowed, true);
UpdateHistoryT.CreateUpdateHistory("16.1.1.0"); //Sets a timestamp that determines which logic we use to calculate repeate charge procedures
Prefs.RefreshCache();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
listRepeatingCharges.ForEach(x => RepeatCharges.Delete(x));
DateTime dateRun = new DateTime(DateTime.Today.AddMonths(2).Year, DateTime.Today.AddMonths(2).Month, 15);//The 15th of two months from now
List <int> listFailedTests = new List <int>();
RepeatCharge rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(DateTime.Today.Year, DateTime.Today.Month, 15); //The 15th of this month
rc.Note = "Charge #1";
rc.CopyNoteToProc = true;
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(DateTime.Today.Year, DateTime.Today.Month, 15);
rc.Note = "Charge #2";
rc.CopyNoteToProc = true;
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
rc = new RepeatCharge();
rc.ChargeAmt = 99;
rc.PatNum = pat.PatNum;
rc.ProcCode = "D2750";
rc.IsEnabled = true;
rc.DateStart = new DateTime(DateTime.Today.Year, DateTime.Today.Month, 15);
rc.Note = "Charge #3";
rc.CopyNoteToProc = true;
rc.RepeatChargeNum = RepeatCharges.Insert(rc);
//Subtest 1 ===============================================================
//There are three procedures with the same amount, proc code, and start date. Run the repeat charge tool. Delete all procedures from
//last month. Run the repeat charge tool again. Make sure that the correct repeat charges were added back.
RepeatCharges.RunRepeatingCharges(dateRun);
List <Procedure> procs = Procedures.Refresh(pat.PatNum);
int lastMonth = dateRun.AddMonths(-1).Month;
int thisMonth = dateRun.Month;
//Delete all procedures from last month
procs.FindAll(x => x.ProcDate.Month == lastMonth)
.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Make sure that the correct number of procedures were added using the correct repeating charges
if (procs.Count != 6 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #3").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #3").Count != 1)
{
listFailedTests.Add(1);
}
//Subtest 2 ===============================================================
//Run the repeat charge tool. Delete all procedures from this month. Run the repeat charge tool again. Make sure that the correct
//repeat charges were added back.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Delete all procedures from this month
procs.FindAll(x => x.ProcDate.Month == thisMonth)
.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Make sure that the correct number of procedures were added using the correct repeating charges
if (procs.Count != 6 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #3").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #3").Count != 1)
{
listFailedTests.Add(2);
}
//Subtest 3 ===============================================================
//Run the repeat charge tool. Delete one procedure from this month. Run the repeat charge tool again. Make sure that the correct
//repeat charges were added back.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Delete one procedure from this month
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #1")
.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Make sure that the correct number of procedures were added using the correct repeating charges
if (procs.Count != 6 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #3").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #3").Count != 1)
{
listFailedTests.Add(3);
}
//Subtest 4 ===============================================================
//Run the repeat charge tool. Delete one procedure from last month. Run the repeat charge tool again. Make sure that the correct
//repeat charges were added back.
procs.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Delete one procedure from last month
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #1")
.ForEach(x => Procedures.Delete(x.ProcNum));
RepeatCharges.RunRepeatingCharges(dateRun);
procs = Procedures.Refresh(pat.PatNum);
//Make sure that the correct number of procedures were added using the correct repeating charges
if (procs.Count != 6 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == lastMonth && x.BillingNote == "Charge #3").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #1").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #2").Count != 1 ||
procs.FindAll(x => x.ProcDate.Month == thisMonth && x.BillingNote == "Charge #3").Count != 1)
{
listFailedTests.Add(4);
}
Assert.AreEqual(0, listFailedTests.Count);
}