/// <summary>
/// Расчет координаты Z поверхности по барицентрическим координатам
/// </summary>
public void CalculateZ()
{
if (TinSurfaceVertex != null)
{
Z = TinSurfaceVertex.Location.Z;
}
else
{
TinSurfaceTriangle triangle = null;
if (TinSurfaceEdge != null)
{
triangle = TinSurfaceEdge.Triangle1 != null ? TinSurfaceEdge.Triangle1 : TinSurfaceEdge.Triangle2;
}
else
{
triangle = TinSurfaceTriangle;
}
if (triangle != null)
{
double lambda1;
double lambda2;
Utils.BarycentricCoordinates(Point2D, triangle, out lambda1, out lambda2);
double lambda3 = 1 - lambda1 - lambda2;
Z = lambda1 * triangle.Vertex1.Location.Z + lambda2 * triangle.Vertex2.Location.Z + lambda3 * triangle.Vertex3.Location.Z;
}
else
{
//???
}
}
}
static private IEnumerable <EdgeWrapper> GetTriangleEdges(TinSurfaceTriangle triangle)
{
var triangleEdges = new List <EdgeWrapper>();
triangleEdges.Add(new EdgeWrapper(triangle.Edge1));
triangleEdges.Add(new EdgeWrapper(triangle.Edge2));
triangleEdges.Add(new EdgeWrapper(triangle.Edge3));
return(triangleEdges);
}
public static Point3dCollection GetOffsetTriangles(TinSurfaceTriangle tri, double offset)
{
var points = new Point3dCollection();
try
{
Acad.Vector3d cenpointp3d = new Acad.Vector3d();
Acad.Vector3d centerv1 = new Acad.Vector3d();
Acad.Vector3d centerv2 = new Acad.Vector3d();
Acad.Vector3d centerv3 = new Acad.Vector3d();
var v1 = tri.Vertex1.Location;
var v2 = tri.Vertex2.Location;
var v3 = tri.Vertex3.Location;
var vec1 = v1.GetVectorTo(v2);
var vec2 = v1.GetVectorTo(v3);
var norm = vec1.CrossProduct(vec2);
var e1 = UnitVector3D(vec1);
var e2 = UnitVector3D(vec2);
var M = new Acad.Vector3d(norm.X, norm.Y, norm.Z + offset);
cenpointp3d = FindTriangleCenter(v1, v2, v3, vec1.CrossProduct(vec2));
centerv1 = new Acad.Vector3d(cenpointp3d.X + v1.X, cenpointp3d.Y + v1.Y, cenpointp3d.Z + v1.Z) / 2.0;
centerv2 = new Acad.Vector3d(cenpointp3d.X + v2.X, cenpointp3d.Y + v2.Y, cenpointp3d.Z + v2.Z) / 2.0;
centerv3 = new Acad.Vector3d(cenpointp3d.X + v3.X, cenpointp3d.Y + v3.Y, cenpointp3d.Z + v3.Z) / 2.0;
var offsetcenterv1 = (centerv1.Add(M));
var offsetcenterv2 = (centerv2.Add(M));
var offsetcenterv3 = (centerv3.Add(M));
var p1 = new Acad.Point3d(offsetcenterv1.X, offsetcenterv1.Y, offsetcenterv1.Z);
var p2 = new Acad.Point3d(offsetcenterv2.X, offsetcenterv2.Y, offsetcenterv2.Z);
var p3 = new Acad.Point3d(offsetcenterv3.X, offsetcenterv3.Y, offsetcenterv3.Z);
points.Add(p1);
points.Add(p2);
points.Add(p3);
}
catch (System.Exception ex)
{
Debug.WriteLine("Error: " + ex.Message);
}
return(points);
}
private Point2d getTriangleCentroid(TinSurfaceTriangle triangle)
{
// The centroid is calculated from the cx and cy being:
// cx = (v1x + v2x + v3x) / 3
// cy = (v1y + v2y + v3y) / 3
double cx = (triangle.Vertex1.Location.X
+ triangle.Vertex2.Location.X
+ triangle.Vertex3.Location.X)
/ 3;
double cy = (triangle.Vertex1.Location.Y
+ triangle.Vertex2.Location.Y
+ triangle.Vertex3.Location.Y)
/ 3;
return(new Point2d(cx, cy));
}
public TriangleGraph(PolylineNesting polylineNesting, TinSurfaceTriangle triangle)
{
this.polylineNesting = polylineNesting;
tinSurfaceTriangle = triangle;
verts[0] = tinSurfaceTriangle.Vertex1;
verts[1] = tinSurfaceTriangle.Vertex2;
verts[2] = tinSurfaceTriangle.Vertex3;
vert2dLocs[0] = Utils.Point2DBy3D(tinSurfaceTriangle.Vertex1.Location);
vert2dLocs[1] = Utils.Point2DBy3D(tinSurfaceTriangle.Vertex2.Location);
vert2dLocs[2] = Utils.Point2DBy3D(tinSurfaceTriangle.Vertex3.Location);
edgesLength[0] = (vert2dLocs[1] - vert2dLocs[0]).Length;
edgesLength[1] = (vert2dLocs[1] - vert2dLocs[2]).Length;
edgesLength[2] = (vert2dLocs[2] - vert2dLocs[0]).Length;
//Добавить узлы вершин треугольника
new VertexGraphNode(this, 0);
new VertexGraphNode(this, 1);
new VertexGraphNode(this, 2);
}
public static Point3dCollection GetOffsetTrianglesEdges(TinSurfaceTriangle tri, double offset)
{
var points = new Point3dCollection();
try
{
Acad.Vector3d cenpointp3d = new Acad.Vector3d();
Acad.Vector3d centerv1 = new Acad.Vector3d();
Acad.Vector3d centerv2 = new Acad.Vector3d();
Acad.Vector3d centerv3 = new Acad.Vector3d();
var edge1 = tri.Edge1;
var edge2 = tri.Edge2;
var edge3 = tri.Edge3;
//compute the contributions from the edges
var tv111 = edge1.Triangle1.Vertex1.Location;
var tv112 = edge1.Triangle1.Vertex2.Location;
var tv113 = edge1.Triangle1.Vertex3.Location;
var tv121 = edge1.Triangle2.Vertex1.Location;
var tv122 = edge1.Triangle2.Vertex2.Location;
var tv123 = edge1.Triangle2.Vertex3.Location;
BBC.SkeletonSurf.SkeletonSurf.CreateLine(tv111, tv112);
BBC.SkeletonSurf.SkeletonSurf.CreateLine(tv111, tv113);
BBC.SkeletonSurf.SkeletonSurf.CreateLine(tv113, tv112);
// vectors
var v22 = tv111.GetVectorTo(tv113);
var v23 = tv121.GetVectorTo(tv123);
var n22 = v22.GetNormal(Tolerance.Global);
var n23 = v23.GetNormal(Tolerance.Global);
var n = n22 + n23;
var angle = v22.GetAngleTo(v23) * 180 / Math.PI;
var ap = v22.AngleOnPlane(new Plane(tv121, v23.CrossProduct(v22)));
var ap2 = v23.AngleOnPlane(new Plane(tv121, v23.CrossProduct(v22)));
//edge1.Triangle1
var v1 = tri.Vertex1.Location;
var v2 = tri.Vertex2.Location;
var v3 = tri.Vertex3.Location;
var vec1 = v1.GetVectorTo(v2);
var vec2 = v1.GetVectorTo(v3);
var norm = vec1.CrossProduct(vec2);
var e1 = UnitVector3D(vec1);
var e2 = UnitVector3D(vec2);
var M = new Acad.Vector3d(norm.X, norm.Y, norm.Z + offset);
cenpointp3d = FindTriangleCenter(v1, v2, v3, vec1.CrossProduct(vec2));
centerv1 = new Acad.Vector3d(cenpointp3d.X + v1.X, cenpointp3d.Y + v1.Y, cenpointp3d.Z + v1.Z) / 2.0;
centerv2 = new Acad.Vector3d(cenpointp3d.X + v2.X, cenpointp3d.Y + v2.Y, cenpointp3d.Z + v2.Z) / 2.0;
centerv3 = new Acad.Vector3d(cenpointp3d.X + v3.X, cenpointp3d.Y + v3.Y, cenpointp3d.Z + v3.Z) / 2.0;
var offsetcenterv1 = (centerv1.Add(M));
var offsetcenterv2 = (centerv2.Add(M));
var offsetcenterv3 = (centerv3.Add(M));
var p1 = new Acad.Point3d(offsetcenterv1.X, offsetcenterv1.Y, offsetcenterv1.Z);
var p2 = new Acad.Point3d(offsetcenterv2.X, offsetcenterv2.Y, offsetcenterv2.Z);
var p3 = new Acad.Point3d(offsetcenterv3.X, offsetcenterv3.Y, offsetcenterv3.Z);
points.Add(p1);
points.Add(p2);
points.Add(p3);
}
catch (System.Exception ex)
{
Debug.WriteLine("Error: " + ex.Message);
}
return(points);
}
public void AddPointToSurfaceWithoutDeform()
{
Document adoc = Application.DocumentManager.MdiActiveDocument;
if (adoc == null)
{
return;
}
Database db = adoc.Database;
Editor ed = adoc.Editor;
CivilDocument cdok = CivilDocument.GetCivilDocument(adoc.Database);
try
{
PromptEntityOptions peo1 = new PromptEntityOptions("\nУкажите поверхность для вставки дополнительной точки");
peo1.SetRejectMessage("\nМожно выбрать только поверхность TIN");
peo1.AddAllowedClass(typeof(TinSurface), true);
PromptEntityResult per1 = ed.GetEntity(peo1);
if (per1.Status == PromptStatus.OK)
{
//Указание точки внутри треугольника для встваки точки
while (true)
{
PromptPointOptions ppo = new PromptPointOptions("Укажите точку внутри одного из треугольников поверхности");
PromptPointResult ppr = ed.GetPoint(ppo);
if (ppr.Status == PromptStatus.OK)
{
Point3d pt = ppr.Value;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
TinSurface tinSurf = tr.GetObject(per1.ObjectId, OpenMode.ForRead) as TinSurface;
TinSurfaceTriangle triangle = tinSurf.FindTriangleAtXY(pt.X, pt.Y);
if (triangle != null)
{
tinSurf.AddLine(triangle.Vertex1, triangle.Vertex2);
}
tr.Commit();
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
TinSurface tinSurf = tr.GetObject(per1.ObjectId, OpenMode.ForRead) as TinSurface;
TinSurfaceTriangle triangle = tinSurf.FindTriangleAtXY(pt.X, pt.Y);
if (triangle != null)
{
tinSurf.AddLine(triangle.Vertex2, triangle.Vertex3);
}
tr.Commit();
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
TinSurface tinSurf = tr.GetObject(per1.ObjectId, OpenMode.ForRead) as TinSurface;
TinSurfaceTriangle triangle = tinSurf.FindTriangleAtXY(pt.X, pt.Y);
if (triangle != null)
{
tinSurf.AddLine(triangle.Vertex3, triangle.Vertex1);
}
tr.Commit();
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
TinSurface tinSurf = tr.GetObject(per1.ObjectId, OpenMode.ForRead) as TinSurface;
TinSurfaceTriangle triangle = tinSurf.FindTriangleAtXY(pt.X, pt.Y);
if (triangle != null)
{
tinSurf.AddVertex(new Point2d(pt.X, pt.Y));
}
tr.Commit();
}
ed.Regen();
}
else
{
return;
}
}
}
}
catch (Autodesk.Civil.SurfaceException)
{
WF.MessageBox.Show("Невозможно редактировать поверхность. Если это быстрая ссылка, то ее нужно освободить");
}
catch (System.Exception ex)
{
CommonException(ex, "Ошибка при вставке точки в поверхность");
}
}
