public async Task OTAA_Join_With_Wrong_AppKey_Fails()
{
var device = TestFixtureCi.Device3_OTAA;
LogTestStart(device);
var appKeyToUse = AppKey.Parse("FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF");
Assert.NotEqual(appKeyToUse, device.AppKey);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, appKeyToUse);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 3);
Assert.False(joinSucceeded, "Join suceeded for invalid AppKey (mic check should fail)");
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync(
$"{device.DeviceID}: join refused: invalid MIC",
$"{device.DeviceID}: join request MIC invalid");
await ArduinoDevice.WaitForIdleAsync();
}
public Task Test_OTAA_Join_Send_And_Rejoin_With_Custom_RX2_DR_MultiGw()
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device20_OTAA_MultiGw));
LogTestStart(device);
return(Test_OTAA_Join_Send_And_Rejoin_With_Custom_RX2_DR(device));
}
public Task Test_ABP_Confirmed_And_Unconfirmed_Message_With_ADR_MultiGw()
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device5_ABP_MultiGw));
LogTestStart(device);
return(Test_ABP_Confirmed_And_Unconfirmed_Message_With_ADR(device));
}
private async Task SendABPMessages(int messages_count, TestDeviceInfo device)
{
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
// Sends 10x unconfirmed messages
for (var i = 0; i < messages_count; ++i)
{
var msg = GeneratePayloadMessage();
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i + 1}/{messages_count}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000005: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000005: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
TestFixtureCi.ClearLogs();
}
// Sends 10x confirmed messages
for (var i = 0; i < messages_count; ++i)
{
var msg = GeneratePayloadMessage();
Log($"{device.DeviceID}: Sending confirmed '{msg}' {i + 1}/{messages_count}");
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// 0000000000000005: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000005: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
TestFixtureCi.ClearLogs();
}
}
public Task Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_Commands_MultiGw()
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device23_OTAA_MultiGw));
LogTestStart(device);
return(Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_Commands(device));
}
public Task Test_OTAA_Unconfirmed_Receives_Confirmed_C2D_Message_Single()
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device14_OTAA));
LogTestStart(device);
return(Test_OTAA_Unconfirmed_Receives_Confirmed_C2D_Message(device));
}
public async Task SensorDecoder_ReflectionBased_ValueSensorDecoder_DecodesPayload()
{
var device = TestFixtureCi.Device12_OTAA;
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
await ArduinoDevice.transferPacketWithConfirmedAsync("4321", 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// Find "0000000000000011: message '{"value":1234}' sent to hub" in network server logs
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":4321}}' sent to hub");
TestFixtureCi.ClearLogs();
}
public Task Test_OTAA_Confirmed_And_Unconfirmed_Message_With_Custom_RX1_DR_Offset_MultiGw()
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device4_OTAA_MultiGw));
LogTestStart(device);
return(Test_OTAA_Confirmed_And_Unconfirmed_Message_With_Custom_RX1_DR_Offset(device));
}
// Ensures that Mac Commands C2D messages working
// Uses Device23_OTAA
private async Task Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_Commands(TestDeviceInfo device)
{
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
await Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_CommandsImplAsync(device, "test");
await Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_CommandsImplAsync(device, string.Empty);
}
public async Task Test_MultiGW_OTTA_Join_Single()
{
var device = TestFixtureCi.Device27_OTAA;
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
// validate that one GW refused the join
const string joinRefusedMsg = "join refused";
var joinRefused = await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync((s) => s.IndexOf(joinRefusedMsg, StringComparison.Ordinal) != -1, new SearchLogOptions(joinRefusedMsg));
Assert.True(joinRefused.Found);
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
// expecting both gw to start picking up messages
// and sending to IoT hub.
var bothReported = false;
for (var i = 0; i < 5; i++)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
bothReported = await TestFixtureCi.ValidateMultiGatewaySources((log) => log.StartsWith($"{device.DeviceID}: sending message", StringComparison.OrdinalIgnoreCase));
if (bothReported)
{
break;
}
}
Assert.True(bothReported);
}
public async Task Test_Concentrator_Deduplication_OTAA()
{
Assert.True(this.initializationSucceeded);
var device = TestFixtureCi.GetDeviceByPropertyName("Device31_OTAA");
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
var droppedLog = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(this.expectedLog, StringComparison.Ordinal) != -1, new SearchLogOptions(this.expectedLog));
Assert.NotNull(droppedLog.MatchedEvent);
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
const int MESSAGE_COUNT = 5;
for (var i = 0; i < MESSAGE_COUNT; ++i)
{
Log($"{device.DeviceID}: Sending OTAA confirmed message {i + 1}/{MESSAGE_COUNT}");
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// 0000000000000031: message '{"value": 101}' sent to hub
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
droppedLog = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(this.expectedLog, StringComparison.Ordinal) != -1, new SearchLogOptions(this.expectedLog));
Assert.NotNull(droppedLog.MatchedEvent);
TestFixtureCi.ClearLogs();
}
}
public async Task Test_ClassC_Send_Message_Using_Function_Endpoint_Should_Be_Received()
{
var device = TestFixtureCi.Device24_ABP;
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.setClassTypeAsync(LoRaArduinoSerial._class_type_t.CLASS_C);
// send one confirmed message for ensuring that a basicstation is "bound" to the device
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending confirmed '{msg}'");
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
TestFixtureCi.ClearLogs();
// Now sending a c2d
var c2d = new LoRaCloudToDeviceMessage()
{
DevEUI = DevEui.Parse(device.DeviceID),
MessageId = Guid.NewGuid().ToString(),
Fport = FramePorts.App23,
RawPayload = Convert.ToBase64String(new byte[] { 0xFF, 0x00 }),
};
TestLogger.Log($"[INFO] Using service API to send C2D message to device {device.DeviceID}");
TestLogger.Log($"[INFO] {JsonConvert.SerializeObject(c2d, Formatting.None)}");
// send message using the SendCloudToDeviceMessage API endpoint
Assert.True(await LoRaAPIHelper.SendCloudToDeviceMessage(device.DevEui, c2d));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// 0000000000000024: received cloud to device message from direct method
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: received cloud to device message from direct method");
Assert.Contains(ArduinoDevice.SerialLogs, (l) => l.Contains("PORT: 23; RX: \"FF00\"", StringComparison.Ordinal));
Assert.Contains(ArduinoDevice.SerialLogs, (l) => l.Contains("RXWIN0, RSSI", StringComparison.Ordinal));
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
}
public async Task InitializeAsync()
{
TestUtils.StartBasicsStation(TestFixture.Configuration, new Dictionary <string, string>()
{
{ "TLS_SNI", "false" },
{ "TC_URI", TestFixture.Configuration.SharedLnsEndpoint },
{ "FIXED_STATION_EUI", TestFixture.Configuration.DefaultBasicStationEui },
{ "RADIODEV", TestFixture.Configuration.RadioDev }
}, out this.temporaryDirectoryName);
var log = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(TestFixture.Configuration.DefaultBasicStationEui, StringComparison.Ordinal) != -1, new SearchLogOptions(TestFixture.Configuration.DefaultBasicStationEui));
this.initializationSucceeded = log.Found;
}
public async Task Test_ABP_Mismatch_NwkSKey_And_AppSKey_Fails_Mic_Validation()
{
var device = TestFixtureCi.Device7_ABP;
LogTestStart(device);
var appSKeyToUse = AppSessionKey.Parse("000102030405060708090A0B0C0D0E0F");
var nwkSKeyToUse = NetworkSessionKey.Parse("01020304050607080910111213141516");
Assert.NotEqual(appSKeyToUse, device.AppSKey);
Assert.NotEqual(nwkSKeyToUse, device.NwkSKey);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(nwkSKeyToUse, appSKeyToUse, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
// wait for serial logs to be ready
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
// await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", this.lora.SerialLogs);
// 0000000000000005: with devAddr 0028B1B0 check MIC failed. Device will be ignored from now on
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DevAddr}: with devAddr {device.DevAddr} check MIC failed");
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
TestFixtureCi.ClearLogs();
// Try with confirmed message
await ArduinoDevice.transferPacketWithConfirmedAsync(GeneratePayloadMessage(), 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// 0000000000000005: with devAddr 0028B1B0 check MIC failed
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DevAddr}: with devAddr {device.DevAddr} check MIC failed");
// wait until arduino stops trying to send confirmed msg
await ArduinoDevice.WaitForIdleAsync();
}
public async Task Test_Device_Initiated_Mac_LinkCheckCmd_Should_work()
{
try
{
const int MESSAGES_COUNT = 3;
var device = TestFixtureCi.Device22_ABP;
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, null);
await ArduinoDevice.setPortAsync(0);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
var msg = "02";
Log($"{device.DeviceID}: Sending unconfirmed Mac LinkCheckCmd message");
await ArduinoDevice.transferHexPacketAsync(msg, 10);
await Task.Delay(2 *Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSGHEX: Done", ArduinoDevice.SerialLogs);
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: LinkCheckCmd mac command detected in upstream payload:");
}
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: answering to a");
}
finally
{
await ArduinoDevice.setPortAsync(1);
}
TestFixtureCi.ClearLogs();
}
public async Task Test_ABP_Invalid_NwkSKey_Fails_With_Mic_Error()
{
var device = TestFixtureCi.Device8_ABP;
LogTestStart(device);
var nwkSKeyToUse = NetworkSessionKey.Parse("FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF");
Assert.NotEqual(nwkSKeyToUse, device.NwkSKey);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(nwkSKeyToUse, device.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000008: with devAddr 0028B1B3 check MIC failed. Device will be ignored from now on
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DevAddr}: with devAddr {device.DevAddr} check MIC failed");
TestFixtureCi.ClearLogs();
// Try with confirmed message
await ArduinoDevice.transferPacketWithConfirmedAsync(GeneratePayloadMessage(), 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// 0000000000000008: with devAddr 0028B1B3 check MIC failed.
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DevAddr}: with devAddr {device.DevAddr} check MIC failed");
// Before starting new test, wait until Lora drivers stops sending/receiving data
await ArduinoDevice.WaitForIdleAsync();
}
public async Task Data_Rate_Is_Updated_When_C2D_With_LinkADRCmd_Received()
{
const int messagesToSend = 10;
const int warmUpMessageCount = 2;
var device = TestFixtureCi.Device32_ABP;
LogTestStart(device);
// Setup LoRa device properties
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
// Setup protocol properties
// Start with DR5
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration.LoraRegion, LoRaArduinoSerial._data_rate_t.DR5, 4, true);
await TestFixture.CleanupC2DDeviceQueueAsync(device.DeviceID);
// Sends 2x unconfirmed messages
for (var i = 1; i <= warmUpMessageCount; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
TestFixture.ClearLogs();
}
var c2dMessage = new LoRaCloudToDeviceMessage()
{
Fport = FramePort.MacCommand,
Payload = String.Empty,
MacCommands = { new LinkADRRequest(datarate: 3, txPower: 4, chMask: 25, chMaskCntl: 0, nbTrans: 1) } // Update data rate to DR3
};
await TestFixtureCi.SendCloudToDeviceMessageAsync(device.DeviceID, c2dMessage);
Log($"C2D Message sent to device, need to check if it receives");
var foundC2DMessage = false;
var foundLinkADRCmd = false;
var foundChangedDataRate = false;
// Sends 8x unconfirmed messages, stopping if C2D message is found and data rate is updated
for (var i = warmUpMessageCount + 1; i <= messagesToSend; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// check if C2D message was found
if (await SearchMessageAsync($"{device.DeviceID}: cloud to device MAC command LinkADRCmd received Type: LinkADRCmd Answer, datarate: 3"))
{
foundC2DMessage = true;
}
// check if LinkADRCmd MAC Command was detected
if (await SearchMessageAsync("LinkADRCmd mac command detected in upstream payload: Type: LinkADRCmd Answer, power: changed, data rate: changed"))
{
foundLinkADRCmd = true;
}
// check if the data rate was changed to DR3
if (await SearchMessageAsync("\"datr\":\"SF9BW125\""))
{
foundChangedDataRate = true;
}
async Task <bool> SearchMessageAsync(string message)
{
var searchResult =
await TestFixtureCi.SearchNetworkServerModuleAsync(messageBody => messageBody.Contains(message, StringComparison.OrdinalIgnoreCase),
new SearchLogOptions(message)
{
MaxAttempts = 1
});
return(searchResult.Found);
}
TestFixture.ClearLogs();
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
if (foundC2DMessage && foundLinkADRCmd && foundChangedDataRate)
{
break;
}
}
Assert.True(foundC2DMessage, $"Could not find C2D message with MAC command LinkADRCmd in LNS log");
Assert.True(foundLinkADRCmd, $"Could not find LinkADRCmd MAC Command in LNS log");
Assert.True(foundChangedDataRate, $"Could not find updated data rate in LNS log");
}
private async Task Test_OTAA_Unconfirmed_Send_And_Receive_C2D_Mac_CommandsImplAsync(TestDeviceInfo device, string c2dMessageBody)
{
const int MaxAttempts = 5;
const int UnconfirmedMsgCount = 2;
// Sends 2x unconfirmed messages
for (var i = 1; i <= UnconfirmedMsgCount; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{UnconfirmedMsgCount}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
TestFixtureCi.ClearLogs();
}
var c2dMessage = new LoRaCloudToDeviceMessage()
{
Fport = FramePorts.App1,
Payload = c2dMessageBody,
MacCommands = { new DevStatusRequest() }
};
await TestFixtureCi.SendCloudToDeviceMessageAsync(device.DeviceID, c2dMessage);
Log($"Message {c2dMessageBody} sent to device, need to check if it receives");
var macCommandReceivedMsg = $"{device.DeviceID}: cloud to device MAC command DevStatusCmd received";
var foundMacCommandReceivedMsg = false;
var deviceMacCommandResponseMsg = $": DevStatusCmd mac command detected in upstream payload: Type: DevStatusCmd Answer, Battery Level:";
var foundDeviceMacCommandResponseMsg = false;
// Sends 5x unconfirmed messages, stopping if assertions succeeded
for (var i = 1; i <= MaxAttempts; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{MaxAttempts}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// check if c2d message was found
if (!foundMacCommandReceivedMsg)
{
var searchResults = await TestFixtureCi.SearchNetworkServerModuleAsync(
(messageBody) =>
{
return(messageBody.StartsWith(macCommandReceivedMsg, StringComparison.Ordinal));
},
new SearchLogOptions(macCommandReceivedMsg)
{
MaxAttempts = 1
});
// We should only receive the message once
if (searchResults.Found)
{
foundMacCommandReceivedMsg = true;
Log($"{device.DeviceID}: Found Mac C2D message in log (after sending {i}/{MaxAttempts}) ? {foundMacCommandReceivedMsg}");
}
}
if (!foundDeviceMacCommandResponseMsg)
{
var macSearchResults = await TestFixtureCi.SearchNetworkServerModuleAsync(
(messageBody) =>
{
return(messageBody.Contains(deviceMacCommandResponseMsg, StringComparison.InvariantCultureIgnoreCase));
},
new SearchLogOptions(deviceMacCommandResponseMsg)
{
MaxAttempts = 1
});
// We should only receive the message once
if (macSearchResults.Found)
{
foundDeviceMacCommandResponseMsg = true;
Log($"{device.DeviceID}: Found Mac Command reply in log (after sending {i}/{MaxAttempts}) ? {foundDeviceMacCommandResponseMsg}");
}
}
TestFixtureCi.ClearLogs();
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
if (foundDeviceMacCommandResponseMsg && foundMacCommandReceivedMsg)
{
break;
}
}
Assert.True(foundMacCommandReceivedMsg, $"Did not find in network server logs: '{macCommandReceivedMsg}'");
Assert.True(foundDeviceMacCommandResponseMsg, $"Did not find in network server logs: '{deviceMacCommandResponseMsg}'");
}
// Verifies that ABP confirmed and unconfirmed messages are working
// Uses Device5_ABP
private async Task Test_ABP_Confirmed_And_Unconfirmed_Message_With_ADR(TestDeviceInfo device)
{
if (device.IsMultiGw)
{
Assert.True(await LoRaAPIHelper.ResetADRCache(device.DevEui));
}
await ArduinoDevice.setDeviceDefaultAsync();
const int MESSAGES_COUNT = 10;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration.LoraRegion, LoRaArduinoSerial._data_rate_t.DR3, 4, true);
// for a reason I need to set DR twice otherwise it reverts to DR 0
// await ArduinoDevice.setDataRateAsync(LoRaArduinoSerial._data_rate_t.DR3, LoRaArduinoSerial._physical_type_t.EU868);
// Sends 5x unconfirmed messages
for (var i = 0; i < MESSAGES_COUNT / 2; ++i)
{
var msg = GeneratePayloadMessage();
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i + 1}/{MESSAGES_COUNT}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000005: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000005: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
TestFixtureCi.ClearLogs();
}
// Sends 5x confirmed messages
for (var i = 0; i < MESSAGES_COUNT / 2; ++i)
{
var msg = GeneratePayloadMessage();
Log($"{device.DeviceID}: Sending confirmed '{msg}' {i + 1}/{MESSAGES_COUNT / 2}");
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(2 *Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// 0000000000000005: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000005: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
if (device.IsMultiGw)
{
var searchTokenSending = $"{device.DeviceID}: sending message to station with EUI";
var sending = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenSending, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenSending));
Assert.NotNull(sending.MatchedEvent);
var searchTokenAlreadySent = $"{device.DeviceID}: another gateway has already sent ack or downlink msg";
var ignored = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenAlreadySent, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenAlreadySent));
Assert.NotNull(ignored.MatchedEvent);
Assert.NotEqual(sending.MatchedEvent.SourceId, ignored.MatchedEvent.SourceId);
}
TestFixtureCi.ClearLogs();
}
// Sends 10x unconfirmed messages
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
var msg = GeneratePayloadMessage();
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i + 1}/{MESSAGES_COUNT / 2}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000005: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000005: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
TestFixtureCi.ClearLogs();
}
// Starting ADR test protocol
Log($"{device.DeviceID}: Starting ADR protocol");
for (var i = 0; i < 56; ++i)
{
var message = GeneratePayloadMessage();
await ArduinoDevice.transferPacketAsync(message, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
}
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: ADR ack request received");
var searchTokenADRRateAdaptation = $"{device.DeviceID}: performing a rate adaptation: DR";
var received = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenADRRateAdaptation, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenADRRateAdaptation));
Assert.NotNull(received.MatchedEvent);
if (device.IsMultiGw)
{
var searchTokenADRAlreadySent = $"{device.DeviceID}: another gateway has already sent ack or downlink msg";
var ignored = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenADRAlreadySent, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenADRAlreadySent));
Assert.NotNull(ignored.MatchedEvent);
Assert.NotEqual(received.MatchedEvent.SourceId, ignored.MatchedEvent.SourceId);
}
// Check the messages are now sent on DR5
for (var i = 0; i < 2; ++i)
{
var message = GeneratePayloadMessage();
await ArduinoDevice.transferPacketAsync(message, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: LinkADRCmd mac command detected in upstream payload: Type: LinkADRCmd Answer, power: changed, data rate: changed,", $"{device.DevAddr}: LinkADRCmd mac command detected in upstream payload: Type: LinkADRCmd Answer, power: not changed, data rate: changed,");
}
}
public async Task Test_Concentrator_Can_Receive_Updates_Then_Connect_To_Lns_And_Receive_Messages()
{
//arrange
var temporaryDirectoryName = string.Empty;
var stationEui = StationEui.Parse(TestFixture.Configuration.CupsBasicStationEui);
var clientThumbprint = TestFixture.Configuration.ClientThumbprint;
var crcParseResult = uint.TryParse(TestFixture.Configuration.ClientBundleCrc, out var crc);
var sigCrcParseResult = uint.TryParse(TestFixture.Configuration.CupsSigKeyChecksum, out var sigCrc);
try
{
var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device33_OTAA));
LogTestStart(device, stationEui);
if (!string.IsNullOrEmpty(clientThumbprint))
{
//if a test re-run, clientThumbprint will be empty, therefore there's nothing to do, previously generated certificates will be reused
//update allowed client thumbprints in IoT Hub Twin to only have the one being added
await TestFixture.UpdateExistingConcentratorThumbprint(stationEui,
condition : (originalArray) => !originalArray.Any(x => x.Equals(clientThumbprint, StringComparison.OrdinalIgnoreCase)),
action : (originalList) =>
{
originalList.RemoveAll(x => true); // remove all keys
originalList.Add(clientThumbprint); // add only new thumbprint
});
}
if (crcParseResult)
{
//if a test re-run, crc field will be empty, therefore there's nothing to do, previously generated certificates will be reused
//update crc value with the one being generated in ci
await TestFixture.UpdateExistingConcentratorCrcValues(stationEui, crc);
}
var fwDigest = TestFixture.Configuration.CupsFwDigest;
var fwPackage = TestFixture.Configuration.CupsBasicStationPackage;
var fwUrl = TestFixture.Configuration.CupsFwUrl;
if (sigCrcParseResult && !string.IsNullOrEmpty(fwDigest) && !string.IsNullOrEmpty(fwPackage) && fwUrl is not null)
{
//if a test re-run, the fields will be empty, therefore there's no update to achieve
await TestFixture.UpdateExistingFirmwareUpgradeValues(stationEui, sigCrc, fwDigest, fwPackage, fwUrl);
}
//setup the concentrator with CUPS_URI only (certificates are retrieved from default location)
TestUtils.StartBasicsStation(TestFixture.Configuration, new Dictionary <string, string>()
{
{ "TLS_SNI", "false" },
{ "CUPS_URI", TestFixture.Configuration.SharedCupsEndpoint },
{ "FIXED_STATION_EUI", stationEui.ToString() },
{ "RADIODEV", TestFixture.Configuration.RadioDev }
}, out temporaryDirectoryName);
// Waiting 30s for being sure that BasicStation actually started up
await Task.Delay(30_000);
// If package log does not match, firmware upgrade process failed
var expectedLog = stationEui + $": Received 'version' message for station '{TestFixture.Configuration.CupsBasicStationVersion}' with package '{fwPackage}'";
var log = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(expectedLog, StringComparison.Ordinal) != -1, new SearchLogOptions(expectedLog) { MaxAttempts = 1 });
Assert.True(log.Found);
//the concentrator should be ready at this point to receive messages
//if receiving 'updf' is succeeding, cups worked successfully
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
var expectedLog2 = stationEui + ": Received 'jreq' message";
var jreqLog = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(expectedLog2, StringComparison.Ordinal) != -1, new SearchLogOptions(expectedLog2) { MaxAttempts = 2 });
Assert.NotNull(jreqLog.MatchedEvent);
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
Log($"{device.DeviceID}: Sending OTAA unconfirmed message");
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
var expectedLog3 = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedLog3, new SearchLogOptions(expectedLog3) { MaxAttempts = 2 });
var expectedLog4 = stationEui + ": Received 'updf' message";
var updfLog = await TestFixtureCi.SearchNetworkServerModuleAsync(
(log) => log.IndexOf(expectedLog4, StringComparison.Ordinal) != -1, new SearchLogOptions(expectedLog4) { MaxAttempts = 2 });
Assert.True(updfLog.Found);
var twin = await TestFixture.GetTwinAsync(stationEui.ToString());
var twinReader = new TwinCollectionReader(twin.Properties.Reported, null);
Assert.True(twinReader.TryRead <string>(TwinProperty.Package, out var reportedPackage) &&
string.Equals(fwPackage, reportedPackage, StringComparison.OrdinalIgnoreCase));
}
finally
{
TestUtils.KillBasicsStation(TestFixture.Configuration, temporaryDirectoryName, out var logFilePath);
if (!string.IsNullOrEmpty(logFilePath) && File.Exists(logFilePath))
{
Log("[INFO] ** Basic Station Logs Start **");
Log(await File.ReadAllTextAsync(logFilePath));
Log("[INFO] ** Basic Station Logs End **");
File.Delete(logFilePath);
}
}
TestFixtureCi.ClearLogs();
}
public async Task Test_OTAA_Confirmed_Receives_C2D_Message_With_RX_Delay_2()
{
const int messagesToSend = 10;
const int warmUpMessageCount = 2;
var device = TestFixtureCi.Device9_OTAA;
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await TestFixture.CleanupC2DDeviceQueueAsync(device.DeviceID);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// find the gateway that accepted the join
const string expectedLog = "JoinAccept";
var joinAccept = await TestFixtureCi.SearchNetworkServerModuleAsync((s) => s.IndexOf(expectedLog, StringComparison.OrdinalIgnoreCase) != -1, new SearchLogOptions(expectedLog));
Assert.NotNull(joinAccept);
Assert.NotNull(joinAccept.MatchedEvent);
var targetGw = joinAccept.MatchedEvent.SourceId;
Assert.Equal(device.GatewayID, targetGw);
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
// Sends 2x confirmed messages
for (var i = 1; i <= warmUpMessageCount; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending confirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
TestFixtureCi.ClearLogs();
}
// sends C2D - between 10 and 99
var c2dMessageBody = (100 + random.Next(90)).ToString(CultureInfo.InvariantCulture);
var c2dMessage = new LoRaCloudToDeviceMessage()
{
Payload = c2dMessageBody,
Fport = FramePorts.App1,
MessageId = Guid.NewGuid().ToString(),
};
await TestFixtureCi.SendCloudToDeviceMessageAsync(device.DeviceID, c2dMessage);
Log($"Message {c2dMessageBody} sent to device, need to check if it receives");
var foundC2DMessageCount = 0;
var foundReceivePacketCount = 0;
var expectedRxSerial = $"+CMSG: PORT: 1; RX: \"{ToHexString(c2dMessageBody)}\"";
Log($"Expected C2D received log is: {expectedRxSerial}");
var c2dLogMessage = $"{device.DeviceID}: done completing cloud to device message, id: {c2dMessage.MessageId}";
Log($"Expected C2D network server log is: {expectedRxSerial}");
// Sends 8x confirmed messages, stopping if C2D message is found
for (var i = warmUpMessageCount + 1; i <= messagesToSend; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending confirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(TimeSpan.FromSeconds(5));
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// Check that RXDelay was correctly used
await TestFixtureCi.CheckAnswerTimingAsync(device.RXDelay, device.GatewayID);
// check if c2d message was found
// 0000000000000009: C2D message: 58
var searchResults = await TestFixtureCi.SearchNetworkServerModuleAsync(
(messageBody) =>
{
return(messageBody.StartsWith(c2dLogMessage, StringComparison.OrdinalIgnoreCase));
},
new SearchLogOptions(c2dLogMessage)
{
MaxAttempts = 1
});
// We should only receive the message once
if (searchResults.Found)
{
foundC2DMessageCount++;
Log($"{device.DeviceID}: Found C2D message in log (after sending {i}/{messagesToSend}) {foundC2DMessageCount} times");
EnsureNotSeenTooManyTimes(foundC2DMessageCount);
}
var localFoundCloudToDeviceInSerial = ArduinoDevice.SerialLogs.Contains(expectedRxSerial);
if (localFoundCloudToDeviceInSerial)
{
foundReceivePacketCount++;
Log($"{device.DeviceID}: Found C2D message in serial logs (after sending {i}/{messagesToSend}) {foundReceivePacketCount} times");
EnsureNotSeenTooManyTimes(foundReceivePacketCount);
}
TestFixtureCi.ClearLogs();
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
Assert.True(foundC2DMessageCount > 0, $"Did not find '{device.DeviceID}: C2D message: {c2dMessageBody}' in logs");
// checks if log arrived
if (foundReceivePacketCount == 0)
{
if (ArduinoDevice.SerialLogs.Contains(expectedRxSerial))
{
foundReceivePacketCount++;
}
}
Assert.True(foundReceivePacketCount > 0, $"Could not find lora receiving message '{expectedRxSerial}'");
}
public async Task C2D_When_Device_Has_Preferred_Windows_2_Should_Receive_In_2nd_Window_With_Custom_DR()
{
const int messagesToSend = 10;
const int warmUpMessageCount = 2;
var device = TestFixtureCi.Device21_ABP;
LogTestStart(device);
// Setup LoRa device properties
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
// Setup protocol properties
await ArduinoDevice.SetupLora(TestFixture.Configuration);
await TestFixture.CleanupC2DDeviceQueueAsync(device.DeviceID);
// Sends 2x unconfirmed messages
for (var i = 1; i <= warmUpMessageCount; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
TestFixture.ClearLogs();
}
// sends C2D - between 10 and 99
var c2dMessageBody = (100 + random.Next(90)).ToString(CultureInfo.InvariantCulture);
var msgId = Guid.NewGuid().ToString();
var c2dMessage = new LoRaCloudToDeviceMessage()
{
Payload = c2dMessageBody,
Fport = FramePorts.App1,
MessageId = msgId,
Confirmed = true,
};
await TestFixtureCi.SendCloudToDeviceMessageAsync(device.DeviceID, c2dMessage);
Log($"Message {c2dMessageBody} sent to device, need to check if it receives");
var foundC2DMessageCount = 0;
var foundReceivePacketCount = 0;
var foundReceivePacketInRX2Count = 0;
var expectedRxSerial1 = $"+MSG: PORT: 1; RX: \"{ToHexString(c2dMessageBody)}\"";
var expectedRxSerial2 = $"+MSG: RXWIN2";
var expectedTcpMessageV1 = $"{device.DevAddr}: ConfirmedDataDown";
var expectedTcpMessageV2 = $"{device.DeviceID}: cloud to device message: {ToHexString(c2dMessageBody)}, id: {msgId}, fport: 1, confirmed: True";
Log($"Expected C2D received log is: {expectedRxSerial1} and {expectedRxSerial2}");
Log($"Expected TCP log starting with: {expectedTcpMessageV1} or {expectedTcpMessageV2}");
// Sends 8x confirmed messages, stopping if C2D message is found
for (var i = warmUpMessageCount + 1; i <= messagesToSend; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// check if c2d message was found
var searchResults = await TestFixture.SearchNetworkServerModuleAsync(
(messageBody) =>
{
return(messageBody.StartsWith(expectedTcpMessageV1, StringComparison.OrdinalIgnoreCase) || messageBody.StartsWith(expectedTcpMessageV2, StringComparison.OrdinalIgnoreCase));
},
new SearchLogOptions($"{expectedTcpMessageV1} or {expectedTcpMessageV2}")
{
MaxAttempts = 1,
});
// We should only receive the message once
if (searchResults.Found)
{
foundC2DMessageCount++;
Log($"{device.DeviceID}: Found C2D message in log (after sending {i}/{messagesToSend}) {foundC2DMessageCount} times");
EnsureNotSeenTooManyTimes(foundC2DMessageCount);
}
if (ArduinoDevice.SerialLogs.Contains(expectedRxSerial1))
{
foundReceivePacketCount++;
Log($"{device.DeviceID}: Found C2D message in serial logs (after sending {i}/{messagesToSend}) {foundReceivePacketCount} times");
EnsureNotSeenTooManyTimes(foundReceivePacketCount);
}
if (ArduinoDevice.SerialLogs.Any(x => x.StartsWith(expectedRxSerial2, StringComparison.OrdinalIgnoreCase)))
{
foundReceivePacketInRX2Count++;
Log($"{device.DeviceID}: Found C2D message (rx2) in serial logs (after sending {i}/{messagesToSend}) {foundReceivePacketInRX2Count} times");
EnsureNotSeenTooManyTimes(foundReceivePacketInRX2Count);
}
if (foundReceivePacketCount > 0 && foundReceivePacketInRX2Count > 0 && foundC2DMessageCount > 0)
{
Log($"{device.DeviceID}: Found all messages in log (after sending {i}/{messagesToSend})");
break;
}
TestFixture.ClearLogs();
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
Assert.True(foundC2DMessageCount > 0, $"Did not find {expectedTcpMessageV1} or {expectedTcpMessageV2} in logs");
// checks if serial received the message
if (foundReceivePacketCount == 0)
{
if (ArduinoDevice.SerialLogs.Contains(expectedRxSerial1))
{
foundReceivePacketCount++;
}
}
Assert.True(foundReceivePacketCount > 0, $"Could not find lora receiving message '{expectedRxSerial1}'");
// checks if serial received the message in RX2
if (foundReceivePacketInRX2Count == 0)
{
if (ArduinoDevice.SerialLogs.Any(x => x.StartsWith(expectedRxSerial2, StringComparison.OrdinalIgnoreCase)))
{
foundReceivePacketInRX2Count++;
}
}
Assert.True(foundReceivePacketInRX2Count > 0, $"Could not find lora receiving message '{expectedRxSerial2}'");
}
private async Task Test_Deduplication_Strategies(string devicePropertyName, string strategy)
{
var device = TestFixtureCi.GetDeviceByPropertyName(devicePropertyName);
LogTestStart(device);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, null);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
for (var i = 0; i < 10; i++)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
var allGwGotIt = await TestFixtureCi.ValidateMultiGatewaySources((log) => log.IndexOf($"deduplication Strategy: {strategy}", StringComparison.OrdinalIgnoreCase) != -1);
if (allGwGotIt)
{
var notDuplicate = "\"IsDuplicate\":false";
var isDuplicate = "\"IsDuplicate\":true";
var notDuplicateResult = await TestFixtureCi.SearchNetworkServerModuleAsync((s) => s.IndexOf(notDuplicate, StringComparison.Ordinal) != -1, new SearchLogOptions(notDuplicate));
var duplicateResult = await TestFixtureCi.SearchNetworkServerModuleAsync((s) => s.IndexOf(isDuplicate, StringComparison.Ordinal) != -1, new SearchLogOptions(isDuplicate));
Assert.NotNull(notDuplicateResult.MatchedEvent);
Assert.NotNull(duplicateResult.MatchedEvent);
Assert.NotEqual(duplicateResult.MatchedEvent.SourceId, notDuplicateResult.MatchedEvent.SourceId);
switch (strategy)
{
case "Mark":
var expectedProperty = "dupmsg";
await TestFixture.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedProperty, "true", new SearchLogOptions(expectedProperty) { SourceIdFilter = duplicateResult.MatchedEvent.SourceId, TreatAsError = true });
await TestFixture.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedProperty, "true", new SearchLogOptions(expectedProperty) { SourceIdFilter = notDuplicateResult.MatchedEvent.SourceId, TreatAsError = true });
break;
case "Drop":
var logMsg = $"{device.DeviceID}: duplication strategy indicated to not process message";
var droppedLog = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(logMsg, StringComparison.Ordinal), new SearchLogOptions(logMsg) { SourceIdFilter = duplicateResult.MatchedEvent.SourceId });
Assert.NotNull(droppedLog.MatchedEvent);
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload) { TreatAsError = true });
break;
default:
throw new SwitchExpressionException();
}
}
TestFixtureCi.ClearLogs();
}
}
// Performs a OTAA join and sends N confirmed and unconfirmed messages
// Expects that:
// - device message is available on IoT Hub
// - frame counter validation is done
// - Message is decoded
private async Task Test_OTAA_Confirmed_And_Unconfirmed_Message_With_Custom_RX1_DR_Offset(TestDeviceInfo device)
{
const int MESSAGES_COUNT = 10;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
// Sends 10x unconfirmed messages
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
Console.WriteLine($"Starting sending OTAA unconfirmed message {i + 1}/{MESSAGES_COUNT}");
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000004: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
// Sends 10x confirmed messages
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
Console.WriteLine($"Starting sending OTAA confirmed message {i + 1}/{MESSAGES_COUNT}");
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
if (device.IsMultiGw)
{
// multi gw, make sure one ignored the message
var searchTokenSending = $"{device.DeviceID}: sending message to station with EUI";
var sending = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenSending, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenSending));
Assert.NotNull(sending.MatchedEvent);
var searchTokenAlreadySent = $"{device.DeviceID}: another gateway has already sent ack or downlink msg";
var ignored = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenAlreadySent, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenAlreadySent));
Assert.NotNull(ignored.MatchedEvent);
Assert.NotEqual(sending.MatchedEvent.SourceId, ignored.MatchedEvent.SourceId);
}
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs, maxAttempts : 5, interval : TimeSpan.FromSeconds(10));
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
if (ArduinoDevice.SerialLogs.Any(x => x.StartsWith("+CMSG: RXWIN1", StringComparison.Ordinal)))
{
// Expect that the response is done on DR4 as the RX1 offset is 1 on this device.
const string logMessage = "\"Rx1\":{\"DataRate\":4";
await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync(log => log.Contains(logMessage, StringComparison.Ordinal), new SearchLogOptions(logMessage));
}
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
}
// Performs a OTAA join and sends 1 unconfirmed, 1 confirmed and rejoins
private async Task Test_OTAA_Join_Send_And_Rejoin_With_Custom_RX2_DR(TestDeviceInfo device)
{
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
// Sends 1x unconfirmed messages
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000004: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
TestFixtureCi.ClearLogs();
msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// Checking than the communication occurs on DR 4 and RX2 as part of preferred windows RX2 and custom RX2 DR
await AssertUtils.ContainsWithRetriesAsync(x => x.StartsWith("+CMSG: RXWIN2", StringComparison.Ordinal), ArduinoDevice.SerialLogs);
// this test has a custom datarate for RX 2 of 3
const string logMessage2 = "\"Rx2\":{\"DataRate\":3";
await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync(x => x.Contains(logMessage2, StringComparison.Ordinal), new SearchLogOptions(logMessage2));
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// rejoin
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded2 = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded2, "Rejoin failed");
if (device.IsMultiGw)
{
const string joinRefusedMsg = "join refused";
var joinRefused = await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync((s) => s.IndexOf(joinRefusedMsg, StringComparison.Ordinal) != -1, new SearchLogOptions(joinRefusedMsg));
Assert.True(joinRefused.Found);
}
}
/* Commented multi gateway tests as they make C2D tests flaky for now
* [RetryFact]
* public Task Test_OTAA_Unconfirmed_Receives_Confirmed_C2D_Message_MultiGw()
* {
* var device = TestFixtureCi.GetDeviceByPropertyName(nameof(TestFixtureCi.Device14_OTAA_MultiGw));
* LogTestStart(device);
* return Test_OTAA_Unconfirmed_Receives_Confirmed_C2D_Message(device);
* }
*/
// Ensures that C2D messages are received when working with unconfirmed messages
// Uses Device10_OTAA
private async Task Test_OTAA_Unconfirmed_Receives_Confirmed_C2D_Message(TestDeviceInfo device)
{
const int messagesToSend = 10;
const int warmUpMessageCount = 2;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await TestFixture.CleanupC2DDeviceQueueAsync(device.DeviceID);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
// Sends 2x unconfirmed messages
for (var i = 1; i <= warmUpMessageCount; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
TestFixtureCi.ClearLogs();
}
// sends C2D - between 10 and 99
var c2dMessageBody = (100 + random.Next(90)).ToString(CultureInfo.InvariantCulture);
var msgId = Guid.NewGuid().ToString();
var c2dMessage = new LoRaCloudToDeviceMessage()
{
Payload = c2dMessageBody,
Fport = FramePorts.App1,
MessageId = msgId,
Confirmed = true,
};
await TestFixtureCi.SendCloudToDeviceMessageAsync(device.DeviceID, c2dMessage);
Log($"Message {c2dMessageBody} sent to device, need to check if it receives");
var foundC2DMessageCount = 0;
var foundReceivePacketCount = 0;
var expectedRxSerial = $"+MSG: PORT: 1; RX: \"{ToHexString(c2dMessageBody)}\"";
var expectedTcpMessageV1 = $"{device.DevAddr}: ConfirmedDataDown";
var expectedTcpMessageV2 = $"{device.DeviceID}: cloud to device message: {ToHexString(c2dMessageBody)}, id: {msgId}, fport: 1, confirmed: True";
Log($"Expected C2D received log is: {expectedRxSerial}");
Log($"Expected TCP log starting with: {expectedTcpMessageV1} or {expectedTcpMessageV2}");
// Sends 8x unconfirmed messages, stopping if C2D message is found
for (var i = warmUpMessageCount + 1; i <= messagesToSend; ++i)
{
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
Log($"{device.DeviceID}: Sending unconfirmed '{msg}' {i}/{messagesToSend}");
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// check if c2d message was found
var searchResults = await TestFixtureCi.SearchNetworkServerModuleAsync(
(messageBody) =>
{
return(messageBody.StartsWith(expectedTcpMessageV1, StringComparison.OrdinalIgnoreCase) || messageBody.StartsWith(expectedTcpMessageV2, StringComparison.OrdinalIgnoreCase));
},
new SearchLogOptions($"{expectedTcpMessageV1} or {expectedTcpMessageV2}")
{
MaxAttempts = 1
});
// We should only receive the message once
if (searchResults.Found)
{
foundC2DMessageCount++;
Log($"{device.DeviceID}: Found C2D message in log (after sending {i}/{messagesToSend}) {foundC2DMessageCount} times");
EnsureNotSeenTooManyTimes(foundC2DMessageCount);
}
var localFoundCloudToDeviceInSerial = ArduinoDevice.SerialLogs.Contains(expectedRxSerial);
if (localFoundCloudToDeviceInSerial)
{
foundReceivePacketCount++;
Log($"{device.DeviceID}: Found C2D message in serial logs (after sending {i}/{messagesToSend}) {foundReceivePacketCount} times");
EnsureNotSeenTooManyTimes(foundReceivePacketCount);
}
TestFixtureCi.ClearLogs();
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
Assert.True(foundC2DMessageCount > 0, $"Did not find {expectedTcpMessageV1} or {expectedTcpMessageV2} in logs");
// checks if log arrived
if (foundReceivePacketCount == 0)
{
if (ArduinoDevice.SerialLogs.Contains(expectedRxSerial))
{
foundReceivePacketCount++;
}
}
Assert.True(foundReceivePacketCount > 0, $"Could not find lora receiving message '{expectedRxSerial}'");
}
public async Task Test_ABP_Device_With_Connection_Timeout()
{
LogTestStart(new TestDeviceInfo[] { TestFixtureCi.Device25_ABP, TestFixtureCi.Device26_ABP });
// Sends 1 message from device 25
var device25 = TestFixtureCi.Device25_ABP;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device25.DevAddr, device25.DeviceID, null);
await ArduinoDevice.setKeyAsync(device25.NwkSKey, device25.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
var expectedLog = $"{device25.DeviceID}: processing time";
await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(expectedLog, StringComparison.Ordinal), new SearchLogOptions(expectedLog));
// wait 61 seconds
await Task.Delay(TimeSpan.FromSeconds(120));
// Send 1 message from device 26
var device26 = TestFixtureCi.Device26_ABP;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device26.DevAddr, device26.DeviceID, null);
await ArduinoDevice.setKeyAsync(device26.NwkSKey, device26.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
var expectedLog2 = $"{device25.DeviceID}: device client disconnected";
var result = await TestFixtureCi.SearchNetworkServerModuleAsync(
msg => msg.StartsWith(expectedLog2, StringComparison.Ordinal),
new SearchLogOptions(expectedLog2)
{
MaxAttempts = 10,
SourceIdFilter = device25.GatewayID,
});
Assert.NotNull(result.MatchedEvent);
TestFixtureCi.ClearLogs();
// Send 1 message from device 25 and check that connection was restablished
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device25.DevAddr, device25.DeviceID, null);
await ArduinoDevice.setKeyAsync(device25.NwkSKey, device25.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var expectedMessage = GeneratePayloadMessage();
await ArduinoDevice.transferPacketAsync(expectedMessage, 10);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device25.DeviceID}: message '{{\"value\":{expectedMessage}}}' sent to hub");
// "device client reconnected"
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device25.DeviceID}: device client reconnected");
}
public async Task OTAA_Join_With_Valid_Device_Updates_DeviceTwin()
{
var device = TestFixtureCi.Device1_OTAA;
LogTestStart(device);
var twinBeforeJoin = await TestFixtureCi.GetTwinAsync(device.DeviceID);
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
// After join: Expectation on serial
// +JOIN: Network joined
// +JOIN: NetID 010000 DevAddr 02:9B:0D:3E
// Assert.Contains("+JOIN: Network joined", this.lora.SerialLogs);
await AssertUtils.ContainsWithRetriesAsync(
(s) => s.StartsWith("+JOIN: NetID", StringComparison.Ordinal),
ArduinoDevice.SerialLogs);
// verify status in device twin
await Task.Delay(TimeSpan.FromSeconds(60));
var twinAfterJoin = await TestFixtureCi.GetTwinAsync(device.DeviceID);
Assert.NotNull(twinAfterJoin);
Assert.NotNull(twinAfterJoin.Properties.Reported);
try
{
Assert.True(twinAfterJoin.Properties.Reported.Contains("FCntUp"), "Property FCntUp does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("FCntDown"), "Property FCntDown does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("NetId"), "Property NetId does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("DevAddr"), "Property DevAddr does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("DevNonce"), "Property DevNonce does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("NwkSKey"), "Property NwkSKey does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("AppSKey"), "Property AppSKey does not exist");
Assert.True(twinAfterJoin.Properties.Reported.Contains("DevEUI"), "Property DevEUI does not exist");
var devAddrBefore = (string)twinBeforeJoin.Properties.Reported["DevAddr"];
var devAddrAfter = (string)twinAfterJoin.Properties.Reported["DevAddr"];
var actualReportedDevEUI = (string)twinAfterJoin.Properties.Reported["DevEUI"];
Assert.NotEqual(devAddrAfter, devAddrBefore);
Assert.Equal(device.DeviceID, actualReportedDevEUI);
Assert.True(twinBeforeJoin.Properties.Reported.Version < twinAfterJoin.Properties.Reported.Version, "Twin was not updated after join");
Log($"[INFO] Twin was updated successfully. Version changed from {twinBeforeJoin.Properties.Reported.Version} to {twinAfterJoin.Properties.Reported.Version}");
}
catch (XunitException xunitException)
{
if (TestFixtureCi.Configuration.IoTHubAssertLevel == LogValidationAssertLevel.Warning)
{
Log($"[WARN] {nameof(OTAA_Join_With_Valid_Device_Updates_DeviceTwin)} failed. {xunitException}");
}
else if (TestFixtureCi.Configuration.IoTHubAssertLevel == LogValidationAssertLevel.Error)
{
throw;
}
}
}
