private void ucButtonSave_Click(object sender, System.EventArgs e)
{
if (!_ListHelper.IsDirty)
{
return;
}
if (_AddTSErrorCodeWhenSave)
{
try
{
this.DataProvider.BeginTransaction();
_TSFacade.AddTSErrorCode(_CurrentTS, _ListHelper.AddList);
_TSFacade.DeleteTSErrorCode(_CurrentTS, _ListHelper.DeleteList);
_TSFacade.DeleteTSErrorCode(_CurrentTS.TSId, string.Empty, _DefaultErrorCode.ParameterAlias);
this.DataProvider.CommitTransaction();
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
this.ShowMessage(ex);
return;
}
this.ShowMessage(new UserControl.Message(MessageType.Success, "$CS_Save_Success"));
}
else
{
_SelectedTSErrorCode = _ListHelper.AddList;
}
_ListHelper.Clear();
this.Close();
}
private Messages DropLoadedParts(string rcard)
{
Messages msg = new Messages();
ActionOnLineHelper onLine = new ActionOnLineHelper(DataProvider);
MaterialFacade materialFacade = new MaterialFacade(this.DataProvider);
ItemFacade itemFacade = new ItemFacade(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
TSFacade tsFacade = new TSFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(rcard.Trim().ToUpper(), string.Empty);
ProductInfo product = GetProduct(sourceRCard);
if (product == null || product.LastSimulation == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msg);
}
// Marked By HI1/Venus.Feng on 20081013 for Hisense Version : GOOD can do drop
/*
* if (product.LastSimulation.ProductStatus != ProductStatus.NG)
* {
* msg.Add(new UserControl.Message(MessageType.Error, "$DropMaterial_Need_NG"));
* return msg;
* }
*/
// End Marked
msg.Add(new UserControl.Message(rcard));
//获取所有需要拆解或者替换的Parts
ArrayList partsToUnload = new ArrayList();
for (int i = 0; i < this.ultraGridLoadedPart.Rows.Count; i++)
{
if (ultraGridLoadedPart.Rows[i].Cells[0].Text.ToLower() == "true")
{
InnoObject innoObject = new InnoObject();
innoObject.LineIndex = i;
innoObject.MCard = ultraGridLoadedPart.Rows[i].Cells["PackedNo"].Text;
innoObject.MCardType = ultraGridLoadedPart.Rows[i].Cells["MCardType"].Text;
innoObject.ItemIndex = partsToUnload.Count + 1;
innoObject.MItemCode = ultraGridLoadedPart.Rows[i].Cells["ItemCode"].Text;
innoObject.MOCode = ultraGridLoadedPart.Rows[i].Cells["MOCode"].Text;
innoObject.Qty = 1;
innoObject.NewBarcode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(ultraGridLoadedPart.Rows[i].Cells["NewBarcode"].Text.Trim()));
partsToUnload.Add(innoObject);
}
}
//对于需要替换的Parts，需要做类似上料中的解析和检查
for (int i = 0; i < partsToUnload.Count; i++)
{
InnoObject innoObject = (InnoObject)partsToUnload[i];
if (innoObject.NewBarcode.Trim().Length > 0)
{
//抓取物料的设定
Domain.MOModel.Material material = (Domain.MOModel.Material)itemFacade.GetMaterial(innoObject.MItemCode, GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (material == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_NotFound"));
return(msg);
}
string barcode = innoObject.NewBarcode.Trim();
//模拟一个OPBOMDetail
OPBOMDetail detailTemp = new OPBOMDetail();
detailTemp.OPBOMItemControlType = material.MaterialControlType;
detailTemp.OPBOMParseType = material.MaterialParseType;
detailTemp.OPBOMCheckType = material.MaterialCheckType;
detailTemp.CheckStatus = material.CheckStatus;
detailTemp.SerialNoLength = material.SerialNoLength;
detailTemp.NeedVendor = material.NeedVendor;
detailTemp.OPBOMSourceItemCode = innoObject.MItemCode;
detailTemp.OPBOMItemCode = innoObject.MItemCode;
detailTemp.OPBOMItemQty = 1;
MINNO newMINNO = new MINNO();
newMINNO.MOCode = innoObject.MOCode.Trim();
newMINNO.MItemCode = material.MaterialCode.Trim();
Messages collectMessage = dataCollectFacade.GetMINNOByBarcode(detailTemp, barcode, newMINNO.MOCode, null, false, false, out newMINNO);
if (collectMessage.IsSuccess())
{
innoObject.NewLotNo = newMINNO.LotNO;
innoObject.NewPCBA = newMINNO.PCBA;
innoObject.NewBIOS = newMINNO.BIOS;
innoObject.NewVersion = newMINNO.Version;
innoObject.NewVendorItemCode = newMINNO.VendorItemCode;
innoObject.NewVendorCode = newMINNO.VendorCode;
innoObject.NewDateCode = newMINNO.DateCode;
}
else
{
msg.AddMessages(collectMessage);
return(msg);
}
}
}
try
{
this.DataProvider.BeginTransaction();
//更新试流单
//下料中处理tbltry，tbltry2rcard
for (int i = 0; i < partsToUnload.Count; i++)
{
InnoObject innoObject = (InnoObject)partsToUnload[i];
TryEventArgs tryEventArgs = new TryEventArgs(
ActionType.DataCollectAction_TryNew, ApplicationService.Current().UserCode, product.LastSimulation.OPCode, ApplicationService.Current().ResourceCode,
product.LastSimulation.ItemCode, sourceRCard, innoObject.MItemCode, innoObject.MCard, string.Empty, false, false);
msg.AddMessages(onLine.ActionWithTransaction(tryEventArgs));
if (!msg.IsSuccess())
{
DataProvider.RollbackTransaction();
return(msg);
}
}
//更新试流单
//上料中处理tbltry，tbltry2rcard
for (int i = 0; i < partsToUnload.Count; i++)
{
InnoObject innoObject = (InnoObject)partsToUnload[i];
if (innoObject.NewBarcode.Trim().Length > 0)
{
TryEventArgs tryEventArgs = new TryEventArgs(
ActionType.DataCollectAction_TryNew, ApplicationService.Current().UserCode, product.LastSimulation.OPCode, ApplicationService.Current().ResourceCode,
product.LastSimulation.ItemCode, sourceRCard, innoObject.MItemCode, innoObject.NewBarcode, string.Empty, true, true);
msg.AddMessages(onLine.ActionWithTransaction(tryEventArgs));
if (!msg.IsSuccess())
{
DataProvider.RollbackTransaction();
return(msg);
}
}
}
//检查新上料是否在TS中而不可用
for (int i = 0; i < partsToUnload.Count; i++)
{
InnoObject innoObject = (InnoObject)partsToUnload[i];
if (innoObject.NewBarcode.Trim().Length > 0)
{
if (!tsFacade.RunningCardCanBeClollected(innoObject.NewBarcode.Trim(), CardType.CardType_Part))
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_InTSOrScrapped $SERIAL_NO=" + innoObject.NewBarcode.Trim()));
DataProvider.RollbackTransaction();
return(msg);
}
}
}
//拆解或者替换处理tblonwipitem，tblsimulationreport
DropMaterialEventArgs dropMaterialEventArgs = new DropMaterialEventArgs(ActionType.DataCollectAction_DropMaterial, product.LastSimulation.RunningCard,
ApplicationService.Current().UserCode, ApplicationService.Current().ResourceCode,
product);
dropMaterialEventArgs.OnwipItems = partsToUnload.ToArray();
msg.AddMessages(onLine.ActionWithTransaction(dropMaterialEventArgs));
if (!msg.IsSuccess())
{
DataProvider.RollbackTransaction();
return(msg);
}
//针对拆解下的物料，做TS相关的动作
for (int i = 0; i < partsToUnload.Count; i++)
{
InnoObject innoObject = (InnoObject)partsToUnload[i];
if (_TSList[innoObject.LineIndex] != null)
{
if (_TSErrorCodeList[innoObject.LineIndex] == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$CS_Please_Select_ErrorCode"));
DataProvider.RollbackTransaction();
return(msg);
}
Domain.TS.TS oldTS = (Domain.TS.TS)tsFacade.QueryLastTSByRunningCard(innoObject.MCard);
if (oldTS != null)
{
if (oldTS.TSStatus == TSStatus.TSStatus_New ||
oldTS.TSStatus == TSStatus.TSStatus_Confirm ||
oldTS.TSStatus == TSStatus.TSStatus_TS)
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_InTS"));
DataProvider.RollbackTransaction();
return(msg);
}
else if (oldTS.TSStatus != TSStatus.TSStatus_Reflow &&
oldTS.TSStatus != TSStatus.TSStatus_Split &&
oldTS.TSStatus != TSStatus.TSStatus_Complete &&
oldTS.TSStatus != TSStatus.TSStatus_Scrap)
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_WrongTSStatus"));
DataProvider.RollbackTransaction();
return(msg);
}
}
Domain.TS.TS newTS = (Domain.TS.TS)_TSList[innoObject.LineIndex];
tsFacade.AddTS(newTS);
foreach (TSErrorCode tsErrorCode in (TSErrorCode[])_TSErrorCodeList[innoObject.LineIndex])
{
tsErrorCode.RunningCard = newTS.RunningCard;
tsErrorCode.RunningCardSequence = newTS.RunningCardSequence;
tsErrorCode.ItemCode = newTS.ItemCode;
tsErrorCode.ModelCode = newTS.ModelCode;
tsErrorCode.MOCode = newTS.MOCode;
tsErrorCode.MOSeq = newTS.MOSeq;
tsErrorCode.MaintainUser = newTS.MaintainUser;
tsErrorCode.MaintainDate = newTS.MaintainDate;
tsErrorCode.MaintainTime = newTS.MaintainTime;
tsFacade.AddTSErrorCode(tsErrorCode);
}
}
}
if (!msg.IsSuccess())
{
DataProvider.RollbackTransaction();
return(msg);
}
if (msg.IsSuccess())
{
DataProvider.CommitTransaction();
}
else
{
DataProvider.RollbackTransaction();
}
}
catch (Exception e)
{
this.DataProvider.RollbackTransaction();
msg.Add(new UserControl.Message(e));
}
return(msg);
}
protected void cmdDistribution_ServerClick(object sender, EventArgs e)
{
/* 下发的时候需要 */
if (_facade == null)
{
_facade = new BenQGuru.eMES.MOModel.RMAFacade(base.DataProvider);
}
ArrayList array = this.gridHelper.GetCheckedRows();
if (array.Count > 0)
{
ArrayList items = new ArrayList(array.Count);
foreach (GridRecord row in array)
{
RMABill rmaBill = (RMABill)this.GetEditObject(row);
if (rmaBill != null)
{
if (rmaBill.Status != RMABillStatus.Initial)
{
WebInfoPublish.PublishInfo(this, "$BS_RMABillStatus_CannotOpened $RMABillCode:" + rmaBill.RMABillCode, this.languageComponent1);
return;
}
object[] objs = _facade.QueryRMADetail(rmaBill.RMABillCode);
if (objs == null || objs.Length == 0)
{
WebInfoPublish.PublishInfo(this, "$BS_RMABillDetail_NOT_EXIST $RMABillCode:" + rmaBill.RMABillCode, this.languageComponent1);
return;
}
items.Add(rmaBill);
}
}
if (_TSFacade == null)
{
_TSFacade = new TSFacade(this.DataProvider);
}
//放在事务中处理
this.DataProvider.BeginTransaction();
foreach (RMABill rmabill in items)
{
// Update RMA Status
rmabill.Status = RMABillStatus.Opened;
_facade.UpdateRMABill(rmabill);
object[] objs = _facade.QueryRMADetail(rmabill.RMABillCode);
if (objs != null || objs.Length != 0)
{
foreach (RMADetial detial in objs)
{
//如果该序列号的处理方式为维修的，需要往TBLTS和TBLTSERRORCODE插入数据
if (detial.Handelcode == "ts")
{
//Insert TS
Domain.TS.TS ts = this.GetTS(detial);
_TSFacade.AddTS(ts);
Domain.TS.TSErrorCode tsErrorCode = this.GetTSErrorCode(detial, ts);
_TSFacade.AddTSErrorCode(tsErrorCode);
}
}
}
}
this.DataProvider.CommitTransaction();
}
//InitViewPanel();
this.RequestData();
}