/// <summary>
/// Convert a set of spiro control points into a set of bézier curves.
///
/// As it does so it will call the appropriate routine in your bézier context with this information
/// – this should allow you to create your own internal representation of those curves.
///
/// Open contours do not need to start with '{', nor to end with '}'.
///
/// Close contours do not need to end with 'z'.
///
/// This function is kept for backwards compatibility for older programs.
/// Please use the function that return success/failure replies when done.
/// </summary>
/// <param name="spiros">An array of input spiros.</param>
/// <param name="n">The number of elements in the spiros array.</param>
/// <param name="isClosed">Whether this describes a closed (True) or open (False) contour.</param>
/// <param name="bc">A bézier results output context.</param>
/// <returns>An boolean success flag. True = completed task and have valid bézier results, or False = unable to complete task, bézier results are invalid.</returns>
/// <example>
/// var points = new SpiroControlPoint[4];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// var bc = new PathBezierContext();
/// var success = Spiro.SpiroCPsToBezier0(points, 4, true, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
/// </example>
public static bool SpiroCPsToBezier0(SpiroControlPoint[] spiros, int n, bool isClosed, IBezierContext bc)
{
SpiroSegment[] s;
if (n <= 0)
{
return(false);
}
if (isClosed)
{
s = SpiroImpl.run_spiro(spiros, n);
}
else
{
SpiroPointType oldty_start = spiros[0].Type;
SpiroPointType oldty_end = spiros[n - 1].Type;
spiros[0].Type = SpiroPointType.OpenContour;
spiros[n - 1].Type = SpiroPointType.EndOpenContour;
s = SpiroImpl.run_spiro(spiros, n);
spiros[n - 1].Type = oldty_end;
spiros[0].Type = oldty_start;
}
if (s != null)
{
SpiroImpl.spiro_to_bpath(s, n, bc);
return(true); // success
}
return(false); // spiro did not converge or encountered non-finite values
}
/// <summary>
/// Convert a set of spiro control points into a set of bézier curves.
///
/// As it does so it will call the appropriate routine in your bézier context with this information
/// – this should allow you to create your own internal representation of those curves.
///
/// Open contours do not need to start with '{', nor to end with '}'.
///
/// Close contours do not need to end with 'z'.
///
/// This function is kept for backwards compatibility for older programs.
/// Please use the function that return success/failure replies when done.
/// </summary>
/// <param name="spiros">An array of input spiros.</param>
/// <param name="n">The number of elements in the spiros array.</param>
/// <param name="isClosed">Whether this describes a closed (True) or open (False) contour.</param>
/// <param name="bc">A bézier results output context.</param>
/// <returns>An boolean success flag. True = completed task and have valid bézier results, or False = unable to complete task, bézier results are invalid.</returns>
/// <example>
/// var points = new SpiroControlPoint[4];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// var bc = new PathBezierContext();
/// var success = Spiro.SpiroCPsToBezier0(points, 4, true, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
/// </example>
public static bool SpiroCPsToBezier0(SpiroControlPoint[] spiros, int n, bool isClosed, IBezierContext bc)
{
SpiroSegment[]? s = SpiroCPsToSegments(spiros, n, isClosed);
if (s != null)
{
SpiroImpl.spiro_to_bpath(s, n, bc);
return(true); // success
}
return(false); // spiro did not converge or encountered non-finite values
}
/// <summary>
/// Convert a tagged set of spiro control points into a set of bézier curves.
///
/// As it does so it will call the appropriate routine in your bézier context with this information
/// – this should allow you to create your own internal representation of those curves.
///
/// The spiros array should indicate it's own end.
///
/// Open contours must have the ty field of the first cp set to '{' and have the ty field of the last cp set to '}'.
///
/// Closed contours must have an extra cp at the end whose ty is 'z' the x and y values of this extra cp are ignored.
/// </summary>
/// <param name="spiros">An array of input spiros.</param>
/// <param name="bc">A bézier results output context.</param>
/// <returns>An boolean success flag.True = completed task and have valid bézier results, or False = unable to complete task, bézier results are invalid.</returns>
/// <example>
/// var points = new SpiroControlPoint[5];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// points[4].X = 0; points[4].Y = 0; points[4].Type = SpiroPointType.End;
/// var bc = new PathBezierContext();
/// var success = Spiro.TaggedSpiroCPsToBezier0(points, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
///
/// var points = new SpiroControlPoint[5];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// points[4].X = 0; points[4].Y = 0; points[4].Type = SpiroPointType.End;
/// var bc = new PathBezierContext();
/// var success = Spiro.TaggedSpiroCPsToBezier0(points, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
/// </example>
public static bool TaggedSpiroCPsToBezier0(SpiroControlPoint[] spiros, IBezierContext bc)
{
var s = TaggedSpiroCPsToSegments(spiros);
if (s != null)
{
SpiroImpl.spiro_to_bpath(s, s.Length - 1, bc);
return(true); // success
}
return(false); // spiro did not converge or encountered non-finite values
}
/// <summary>
/// Convert a tagged set of spiro control points into a set of bézier curves.
///
/// As it does so it will call the appropriate routine in your bézier context with this information
/// – this should allow you to create your own internal representation of those curves.
///
/// The spiros array should indicate it's own end.
///
/// Open contours must have the ty field of the first cp set to '{' and have the ty field of the last cp set to '}'.
///
/// Closed contours must have an extra cp at the end whose ty is 'z' the x and y values of this extra cp are ignored.
/// </summary>
/// <param name="spiros">An array of input spiros.</param>
/// <param name="bc">A bézier results output context.</param>
/// <returns>An boolean success flag.True = completed task and have valid bézier results, or False = unable to complete task, bézier results are invalid.</returns>
/// <example>
/// var points = new SpiroControlPoint[5];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// points[4].X = 0; points[4].Y = 0; points[4].Type = SpiroPointType.End;
/// var bc = new PathBezierContext();
/// var success = Spiro.TaggedSpiroCPsToBezier0(points, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
///
/// var points = new SpiroControlPoint[5];
/// points[0].X = -100; points[0].Y = 0; points[0].Type = SpiroPointType.G4;
/// points[1].X = 0; points[1].Y = 100; points[1].Type = SpiroPointType.G4;
/// points[2].X = 100; points[2].Y = 0; points[2].Type = SpiroPointType.G4;
/// points[3].X = 0; points[3].Y = -100; points[3].Type = SpiroPointType.G4;
/// points[4].X = 0; points[4].Y = 0; points[4].Type = SpiroPointType.End;
/// var bc = new PathBezierContext();
/// var success = Spiro.TaggedSpiroCPsToBezier0(points, bc);
/// Console.WriteLine(bc);
/// Console.WriteLine("Success: {0} ", success);
/// </example>
public static bool TaggedSpiroCPsToBezier0(SpiroControlPoint[] spiros, IBezierContext bc)
{
SpiroSegment[] s;
int n;
n = 0;
while (true)
{
if (spiros[n].Type == SpiroPointType.End || spiros[n].Type == SpiroPointType.EndOpenContour)
{
break;
}
// invalid input
if (n >= spiros.Length)
{
return(false);
}
++n;
}
if (spiros[n].Type == SpiroPointType.EndOpenContour)
{
++n;
}
if (n <= 0)
{
return(false); // invalid input
}
s = SpiroImpl.run_spiro(spiros, n);
if (s != null)
{
SpiroImpl.spiro_to_bpath(s, n, bc);
return(true); // success
}
return(false); // spiro did not converge or encountered non-finite values
}