static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d axis = null;
SolidEdgeFrameworkSupport.Arcs2d arcs2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgePart.RefAxis refaxis = null;
Array aProfiles = null;
SolidEdgeGeometry.Edges edges = null;
SolidEdgeGeometry.Circle circle = null;
SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null;
SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null;
Array center = null;
SolidEdgePart.Rounds rounds = null;
try
{
Console.WriteLine("Registering OleMessageFilter.");
// Register with OLE to handle concurrency issues on the current thread.
OleMessageFilter.Register();
Console.WriteLine("Connecting to Solid Edge.");
// Connect to or start Solid Edge.
application = SolidEdgeUtils.Connect(true);
// Make sure user can see the GUI.
application.Visible = true;
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the Documents collection.
documents = application.Documents;
Console.WriteLine("Creating a new part document.");
// Create a new PartDocument.
partDocument = (SolidEdgePart.PartDocument)
documents.Add("SolidEdge.PartDocument");
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
Console.WriteLine("Drawing part.");
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// D1 to FA are parameters in a form, introduced by the user.
double D1 = 0.020;
double D2 = 0.026;
double D3 = 0.003;
double D4 = 0.014;
double L1 = 0.040;
double L2 = 0.030;
double L3 = 0.005;
double FA = 0.0005; // round
// Get a reference to the ref planes collection.
refPlanes = partDocument.RefPlanes;
// Front (xz).
refPlane = refPlanes.Item(3);
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Create a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
// Get a reference to the profile lines2d collection.
lines2d = profile.Lines2d;
// Get a reference to the profile arcs2d collection.
arcs2d = profile.Arcs2d;
double H = L1 - L2;
double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180)));
lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0); // Line1
lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H); // Line2
lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H); // Line3
lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1); // Line4
lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1); // Line5
lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6
lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y); // Line7
lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0); // Line8
axis = lines2d.AddBy2Points(0, 0, 0, L1);
profile.ToggleConstruction(axis);
// relations
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis);
// Close the profile.
int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired);
profile.Visible = false;
// Create a new array of profile objects.
aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
aProfiles.SetValue(profile, 0);
Console.WriteLine("Creating finite revolved protrusion.");
// add Finite Revolved Protrusion.
model = models.AddFiniteRevolvedProtrusion(1, ref aProfiles, refaxis, SolidEdgePart.FeaturePropertyConstants.igRight, 2 * Math.PI, null, null);
Console.WriteLine("Creating adding rounds.");
SolidEdgeGeometry.Edge[] arrEdges = { null };
double[] arrRadii = { FA };
revolvedProtrusions = model.RevolvedProtrusions;
revolvedProtrusion = revolvedProtrusions.Item(1);
edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
foreach (SolidEdgeGeometry.Edge edge in edges)
{
circle = (SolidEdgeGeometry.Circle)edge.Geometry;
if (circle.Radius == D2 / 2)
{
center = Array.CreateInstance(typeof(double), 3);
circle.GetCenterPoint(ref center);
if ((double)center.GetValue(0) == 0 && (double)center.GetValue(1) == 0 && (double)center.GetValue(2) == H)
{
arrEdges[0] = edge;
break;
}
}
}
rounds = model.Rounds;
object optArg = Type.Missing;
rounds.Add(1, arrEdges, arrRadii, optArg, optArg, optArg, optArg);
Console.WriteLine("Switching to ISO view.");
// Switch to ISO view.
application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
#if DEBUG
System.Diagnostics.Debugger.Break();
#endif
Console.WriteLine(ex.Message);
}
}
public static SolidEdgePart.Model CreateFiniteExtrudedProtrusion(SolidEdgePart.PartDocument partDocument, SolidEdgePart.RefPlane refPlane, double[][] linesArray, SolidEdgePart.FeaturePropertyConstants profilePlaneSide, double extrusionDistance)
{
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgeFrameworkSupport.Relation2d relation2d = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
System.Array aProfiles = null;
// Get a reference to the profile sets collection.
profileSets = partDocument.ProfileSets;
// Add a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Add a new profile.
profile = profiles.Add(refPlane);
// Get a reference to the lines2d collection.
lines2d = profile.Lines2d;
// Draw the Base Profile.
for (int i = 0; i <= linesArray.GetUpperBound(0); i++)
{
line2d = lines2d.AddBy2Points(
x1: linesArray[i][0],
y1: linesArray[i][1],
x2: linesArray[i][2],
y2: linesArray[i][3]);
}
// Define Relations among the Line objects to make the Profile closed.
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
// Connect all of the lines.
for (int i = 1; i <= lines2d.Count; i++)
{
int j = i + 1;
// When we reach the last line, wrap around and connect it to the first line.
if (j > lines2d.Count)
{
j = 1;
}
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(i),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(j),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
guaranteed_ok: true);
}
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Hide the profile.
profile.Visible = false;
// Create a new array of profile objects.
aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
aProfiles.SetValue(profile, 0);
// Get a reference to the models collection.
models = partDocument.Models;
// Create the extended protrusion.
model = models.AddFiniteExtrudedProtrusion(
NumberOfProfiles: aProfiles.Length,
ProfileArray: ref aProfiles,
ProfilePlaneSide: profilePlaneSide,
ExtrusionDistance: extrusionDistance);
return(model);
}
public static SolidEdgePart.Model CreateFiniteRevolvedProtrusion(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d axis = null;
SolidEdgeFrameworkSupport.Arcs2d arcs2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgePart.RefAxis refaxis = null;
Array aProfiles = null;
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// D1 to FA are parameters in a form, introduced by the user.
double D1 = 0.020;
double D2 = 0.026;
double D3 = 0.003;
double D4 = 0.014;
double L1 = 0.040;
double L2 = 0.030;
double L3 = 0.005;
// Get a reference to the ref planes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Create a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
// Get a reference to the profile lines2d collection.
lines2d = profile.Lines2d;
// Get a reference to the profile arcs2d collection.
arcs2d = profile.Arcs2d;
double H = L1 - L2;
double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180)));
lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0); // Line1
lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H); // Line2
lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H); // Line3
lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1); // Line4
lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1); // Line5
lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6
lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y); // Line7
lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0); // Line8
axis = lines2d.AddBy2Points(0, 0, 0, L1);
profile.ToggleConstruction(axis);
// relations
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis);
// Close the profile.
int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired);
profile.Visible = false;
// Create a new array of profile objects.
aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
aProfiles.SetValue(profile, 0);
// add Finite Revolved Protrusion.
model = models.AddFiniteRevolvedProtrusion(
aProfiles.Length,
ref aProfiles,
refaxis,
SolidEdgePart.FeaturePropertyConstants.igRight,
2 * Math.PI,
null,
null);
return(model);
}
public static void CreateHolesWithUserDefinedPattern(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refplane = refplanes.GetFrontPlane();
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.08, 0 });
linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
linesArray.Add(new double[] { 0, 0.06, 0, 0 });
// Call helper method to create the actual geometry.
CreateFiniteExtrudedProtrusion(partDocument, refplane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);
// Get a reference to the Models collection.
models = partDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = partDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.01, 0.01 },
{ 0.02, 0.01 },
{ 0.03, 0.01 },
{ 0.04, 0.01 },
{ 0.05, 0.01 },
{ 0.06, 0.01 },
{ 0.07, 0.01 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = partDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
public static SolidEdgePart.Model CreateSweptProtrusion(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile sketchProfile = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <int> listOrigins = new List <int>();
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// Get a reference to the Sketches collections.
sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Get a reference to the ref planes collection.
refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Add a new sketch.
sketch = (SolidEdgePart.Sketch)sketches.Add();
// Add profile for sketch on specified refplane.
sketchProfile = sketch.Profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = sketchProfile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.02);
// Close the profile.
sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listPaths.Add(sketchProfile);
listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
// NOTE: profile is the Curve.
refPlane = refPlanes.AddNormalToCurve(
sketchProfile,
SolidEdgePart.ReferenceElementConstants.igCurveEnd,
refPlanes.GetFrontPlane(),
SolidEdgePart.ReferenceElementConstants.igPivotEnd,
true,
System.Reflection.Missing.Value);
// Add a new profile set.
profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();
// Get a reference to the profiles collection.
profiles = (SolidEdgePart.Profiles)profileSet.Profiles;
// add a new profile.
profile = (SolidEdgePart.Profile)profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = profile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.01);
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listSections.Add(profile);
listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
listOrigins.Add(0); //Use 0 for closed profiles.
// Create the extended protrusion.
model = models.AddSweptProtrusion(
listPaths.Count,
listPaths.ToArray(),
listPathTypes.ToArray(),
listSections.Count,
listSections.ToArray(),
listSectionTypes.ToArray(),
listOrigins.ToArray(),
0,
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null);
// Hide profiles.
sketchProfile.Visible = false;
profile.Visible = false;
return(model);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the Sketches collection.
sketches = partDocument.Sketches;
// Create a new sketch.
sketch = sketches.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(circle2d);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void CreateFiniteExtrudedProtrusion(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgeFrameworkSupport.Relation2d relation2d = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
System.Array aProfiles = null;
// Get a reference to the profile sets collection.
profileSets = partDocument.ProfileSets;
// Add a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Get a reference to the ref planes collection.
refplanes = partDocument.RefPlanes;
// Add a new profile.
profile = profiles.Add(refplanes.Item(3));
// Get a reference to the lines2d collection.
lines2d = profile.Lines2d;
// UOM = meters.
double[,] lineMatrix = new double[, ]
{
//{x1, y1, x2, y2}
{ 0, 0, 0.08, 0 },
{ 0.08, 0, 0.08, 0.06 },
{ 0.08, 0.06, 0.064, 0.06 },
{ 0.064, 0.06, 0.064, 0.02 },
{ 0.064, 0.02, 0.048, 0.02 },
{ 0.048, 0.02, 0.048, 0.06 },
{ 0.048, 0.06, 0.032, 0.06 },
{ 0.032, 0.06, 0.032, 0.02 },
{ 0.032, 0.02, 0.016, 0.02 },
{ 0.016, 0.02, 0.016, 0.06 },
{ 0.016, 0.06, 0, 0.06 },
{ 0, 0.06, 0, 0 }
};
// Draw the Base Profile.
for (int i = 0; i <= lineMatrix.GetUpperBound(0); i++)
{
line2d = lines2d.AddBy2Points(
x1: lineMatrix[i, 0],
y1: lineMatrix[i, 1],
x2: lineMatrix[i, 2],
y2: lineMatrix[i, 3]);
}
// Define Relations among the Line objects to make the Profile closed.
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
// Connect all of the lines.
for (int i = 1; i <= lines2d.Count; i++)
{
int j = i + 1;
// When we reach the last line, wrap around and connect it to the first line.
if (j > lines2d.Count)
{
j = 1;
}
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(i),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(j),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
guaranteed_ok: true);
}
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Hide the profile.
profile.Visible = false;
// Create a new array of profile objects.
aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
aProfiles.SetValue(profile, 0);
// Get a reference to the models collection.
models = partDocument.Models;
Console.WriteLine("Creating finite extruded protrusion.");
// Create the extended protrusion.
model = models.AddFiniteExtrudedProtrusion(
NumberOfProfiles: aProfiles.Length,
ProfileArray: ref aProfiles,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
ExtrusionDistance: 0.005);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgeFrameworkSupport.Relation2d relation2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
int status = 0;
SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null;
SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null;
SolidEdgeGeometry.Edges edges = null;
List <object> edgeList = new List <object>();
SolidEdgeGeometry.Faces faces = null;
SolidEdgePart.Chamfers chamfers = null;
SolidEdgePart.Chamfer chamfer = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
refPlanes = partDocument.RefPlanes;
refPlane = refPlanes.Item(1);
profileSets = partDocument.ProfileSets;
profileSet = profileSets.Add();
profiles = profileSet.Profiles;
profile = profiles.Add(refPlane);
profileList.Add(profile);
lines2d = profile.Lines2d;
line2d = lines2d.AddBy2Points(0, 0, 0.06, 0);
line2d = lines2d.AddBy2Points(0.06, 0, 0.06, 0.06);
line2d = lines2d.AddBy2Points(0.06, 0.06, 0, 0.06);
line2d = lines2d.AddBy2Points(0, 0.06, 0, 0);
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(1),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(2),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(2),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(3),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(3),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(4),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(4),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(1),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
// Make sure profile is closed.
status = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
if (status != 0)
{
throw new System.Exception("Profile not closed.");
}
models = partDocument.Models;
model = models.AddFiniteExtrudedProtrusion(
NumberOfProfiles: profileList.Count,
ProfileArray: profileList.ToArray(),
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
ExtrusionDistance: 0.02);
profile.Visible = false;
extrudedProtrusions = model.ExtrudedProtrusions;
extrudedProtrusion = extrudedProtrusions.Item(1);
//edges = (SolidEdgeGeometry.Edges)extrudedProtrusion.get_Edges(
// SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);
//edgeList.Add(edges.Item(5));
//edgeList.Add(edges.Item(8));
faces = (SolidEdgeGeometry.Faces)
extrudedProtrusion.get_Faces(SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);
chamfers = model.Chamfers;
SolidEdgeGeometry.Face face = (SolidEdgeGeometry.Face)faces.Item(1);
double setbackDistance1 = 0.009;
double setbackDistance2 = 0.001;
edges = (SolidEdgeGeometry.Edges)face.Edges;
edgeList.Add(edges.Item(1));
chamfer = chamfers.AddUnequalSetback(
ReferenceFace: face,
NumberOfEdgeSets: edgeList.Count,
EdgeSetArray: edgeList.ToArray(),
SetbackDistance1: setbackDistance1,
SetbackDistance2: setbackDistance2);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Constructions constructions = null;
SolidEdgePart.ExtrudedSurfaces extrudedSurfaces = null;
SolidEdgePart.ExtrudedSurface extrudedSurface = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the Sketches collection.
sketches = partDocument.Sketches;
// Create a new sketch.
sketch = sketches.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the Constructions collection.
constructions = partDocument.Constructions;
// Get a reference to the ExtrudedSurfaces collection.
extrudedSurfaces = constructions.ExtrudedSurfaces;
// These parameter variables are declared because we have to pass them as pointers.
SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
Array profileArray = profileList.ToArray();
// Add a new ExtrudedSurface.
extrudedSurface = extrudedSurfaces.Add(
NumberOfProfiles: profileArray.Length,
ProfileArray: ref profileArray,
ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth1: 0.0127,
KeyPointOrTangentFace1: null,
KeyPointFlags1: ref KeyPointFlags1,
FromFaceOrRefPlane: null,
FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
FromFaceOffsetDistance: 0,
TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside,
TreatmentDraftAngle1: 0.1,
TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset1: 0.003,
TreatmentCrownTakeOffAngle1: 0,
ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft,
FiniteDepth2: 0.0127,
KeyPointOrTangentFace2: null,
KeyPointFlags2: ref KeyPointFlags2,
ToFaceOrRefPlane: null,
ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
ToFaceOffsetDistance: 0,
TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone,
TreatmentDraftAngle2: 0,
TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset2: 0.003,
TreatmentCrownTakeOffAngle2: 0,
WantEndCaps: true
);
SolidEdgePart.FeaturePropertyConstants ExtentType;
SolidEdgePart.FeaturePropertyConstants ExtentSide;
double FiniteDepth = 0.0;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
// Get extent information for the first direction.
extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth);
// Modify parameters.
FiniteDepth = 2.0;
ExtentType = SolidEdgePart.FeaturePropertyConstants.igFinite;
ExtentSide = SolidEdgePart.FeaturePropertyConstants.igRight;
// Apply extent information for the first direction.
extrudedSurface.ApplyDirection1Extent(
ExtentType,
ExtentSide,
FiniteDepth,
null,
ref KeyPointFlags);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(extrudedSurface);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void CreateBaseTab(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgeFrameworkSupport.Relation2d relation2d = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
// Get a reference to the profile sets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Get a reference to the ref planes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Add a new profile.
profile = profiles.Add(refplanes.Item(1));
// Get a reference to the lines2d collection.
lines2d = profile.Lines2d;
// UOM = meters.
double[,] lineMatrix = new double[, ]
{
//{x1, y1, x2, y2}
{ 0.05, 0.025, 0.05, 0.025 },
{ -0.05, 0.025, -0.05, -0.025 },
{ -0.05, -0.025, 0.05, -0.025 },
{ 0.05, -0.025, 0.05, 0.025 }
};
// Draw the Base Profile.
for (int i = 0; i <= lineMatrix.GetUpperBound(0); i++)
{
line2d = lines2d.AddBy2Points(
lineMatrix[i, 0],
lineMatrix[i, 1],
lineMatrix[i, 2],
lineMatrix[i, 3]);
}
// Define Relations among the Line objects to make the Profile closed.
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
// Connect all of the lines.
for (int i = 1; i <= lines2d.Count; i++)
{
int j = i + 1;
// When we reach the last line, wrap around and connect it to the first line.
if (j > lines2d.Count)
{
j = 1;
}
relation2d = relations2d.AddKeypoint(
lines2d.Item(i),
(int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
lines2d.Item(j),
(int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
true);
}
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Hide the profile.
profile.Visible = false;
// Get a reference to the models collection.
models = sheetMetalDocument.Models;
// Create the base tab.
model = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);
}
static void CreateHolesWithUserDefinedPattern(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Get a reference to Right (yz) plane.
refplane = refplanes.Item(3);
// Get a reference to the Models collection.
models = sheetMetalDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
// This creates a cross pattern of holes.
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.00, 0.00 },
{ -0.01, 0.00 },
{ -0.02, 0.00 },
{ -0.03, 0.00 },
{ -0.04, 0.00 },
{ 0.01, 0.00 },
{ 0.02, 0.00 },
{ 0.03, 0.00 },
{ 0.04, 0.00 },
{ 0.00, -0.01 },
{ 0.00, -0.02 },
{ 0.00, -0.03 },
{ 0.00, -0.04 },
{ 0.00, 0.01 },
{ 0.00, 0.02 },
{ 0.00, 0.03 },
{ 0.00, 0.04 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = sheetMetalDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile sketchProfile = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <int> listOrigins = new List <int>();
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new PartDocument.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// Get a reference to the Sketches collections.
sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Get a reference to the ref planes collection.
refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Add a new sketch.
sketch = (SolidEdgePart.Sketch)sketches.Add();
// Add profile for sketch on specified refplane.
sketchProfile = sketch.Profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = sketchProfile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.02);
// Close the profile.
sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listPaths.Add(sketchProfile);
listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
// NOTE: profile is the Curve.
refPlane = refPlanes.AddNormalToCurve(
sketchProfile,
SolidEdgePart.ReferenceElementConstants.igCurveEnd,
refPlanes.GetFrontPlane(),
SolidEdgePart.ReferenceElementConstants.igPivotEnd,
true,
System.Reflection.Missing.Value);
// Add a new profile set.
profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();
// Get a reference to the profiles collection.
profiles = (SolidEdgePart.Profiles)profileSet.Profiles;
// add a new profile.
profile = (SolidEdgePart.Profile)profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = profile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.01);
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listSections.Add(profile);
listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
listOrigins.Add(0); //Use 0 for closed profiles.
// Create the extended protrusion.
model = models.AddSweptProtrusion(
listPaths.Count,
listPaths.ToArray(),
listPathTypes.ToArray(),
listSections.Count,
listSections.ToArray(),
listSectionTypes.ToArray(),
listOrigins.ToArray(),
0,
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null);
// Hide profiles.
sketchProfile.Visible = false;
profile.Visible = false;
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}