static void ConvertAllDrawingViewsTo2D(SolidEdgeDraft.Section section)
{
SolidEdgeDraft.SectionSheets sectionSheets = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgeDraft.DrawingView drawingView = null;
sectionSheets = section.Sheets;
for (int i = 1; i <= sectionSheets.Count; i++)
{
// Get a reference to the sheet.
sheet = sectionSheets.Item(i);
// Get a reference to the DrawingViews collection.
drawingViews = sheet.DrawingViews;
for (int j = 1; j < drawingViews.Count; j++)
{
drawingView = drawingViews.Item(j);
Console.WriteLine("Dropping (convert to 2D) DrawingView '{0} - {1}'. ", drawingView.Name, drawingView.Caption);
// DrawingView's of type igUserView cannot be converted.
if (drawingView.DrawingViewType != SolidEdgeDraft.DrawingViewTypeConstants.igUserView)
{
// Converts the current DrawingView to an igUserView type containing simple geometry
// and disassociates the drawing view from the source 3d Model.
drawingView.Drop();
}
}
}
}
void DoOpenSave(SolidEdgeDraft.DraftDocument draftDocument, DraftSettings draftSettings)
{
SolidEdgeDraft.Sections sections = null;
SolidEdgeDraft.Section section = null;
SolidEdgeDraft.SectionSheets sectionSheets = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgeDraft.DrawingView drawingView = null;
if (draftSettings.UpdateDrawingViews)
{
sections = draftDocument.Sections;
section = sections.WorkingSection;
sectionSheets = section.Sheets;
for (int i = 1; i <= sectionSheets.Count; i++)
{
sheet = sectionSheets.Item(i);
drawingViews = sheet.DrawingViews;
for (int j = 1; j <= drawingViews.Count; j++)
{
drawingView = drawingViews.Item(j);
drawingView.Update();
}
}
}
}
static void UpdateAllViewsInWorkingSection(SolidEdgeDraft.Section section)
{
SolidEdgeDraft.SectionSheets sectionSheets = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgeDraft.DrawingView drawingView = null;
sectionSheets = section.Sheets;
for (int i = 1; i <= sectionSheets.Count; i++)
{
sheet = sectionSheets.Item(i);
drawingViews = sheet.DrawingViews;
for (int j = 1; j < drawingViews.Count; j++)
{
drawingView = drawingViews.Item(j);
Console.WriteLine("Updating DrawingView '{0} - {1}'.", drawingView.Name, drawingView.Caption);
// Updates an out-of-date drawing view.
drawingView.Update();
// Updates the drawing view even if it is not out-of-date.
//drawingView.ForceUpdate();
}
}
}
static void AddItemsToSelectSet(SolidEdgeFramework.SolidEdgeDocument document)
{
SolidEdgeAssembly.AssemblyDocument assemblyDocument = null;
SolidEdgeAssembly.AsmRefPlanes asmRefPlanes = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.EdgebarFeatures edgeBarFeatures = null;
switch (document.Type)
{
case SolidEdgeFramework.DocumentTypeConstants.igAssemblyDocument:
assemblyDocument = (SolidEdgeAssembly.AssemblyDocument)document;
asmRefPlanes = assemblyDocument.AsmRefPlanes;
for (int i = 1; i <= asmRefPlanes.Count; i++)
{
assemblyDocument.SelectSet.Add(asmRefPlanes.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igDraftDocument:
draftDocument = (SolidEdgeDraft.DraftDocument)document;
sheet = draftDocument.ActiveSheet;
drawingViews = sheet.DrawingViews;
for (int i = 1; i <= drawingViews.Count; i++)
{
draftDocument.SelectSet.Add(drawingViews.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igPartDocument:
partDocument = (SolidEdgePart.PartDocument)document;
edgeBarFeatures = partDocument.DesignEdgebarFeatures;
for (int i = 1; i <= edgeBarFeatures.Count; i++)
{
partDocument.SelectSet.Add(edgeBarFeatures.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igSheetMetalDocument:
sheetMetalDocument = (SolidEdgePart.SheetMetalDocument)document;
edgeBarFeatures = sheetMetalDocument.DesignEdgebarFeatures;
for (int i = 1; i <= edgeBarFeatures.Count; i++)
{
partDocument.SelectSet.Add(edgeBarFeatures.Item(i));
}
break;
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.SolidEdgeDocument document = null;
SolidEdgeFramework.SelectSet selectSet = null;
SolidEdgeAssembly.AssemblyDocument assemblyDocument = null;
SolidEdgeAssembly.AsmRefPlanes asmRefPlanes = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.EdgebarFeatures edgeBarFeatures = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect();
// Get a reference to the active selectset.
selectSet = application.ActiveSelectSet;
// Temporarily suspend selectset UI updates.
selectSet.SuspendDisplay();
// Clear the selectset.
selectSet.RemoveAll();
// Get a reference to the active document.
document = application.GetActiveDocument <SolidEdgeFramework.SolidEdgeDocument>(false);
if (document != null)
{
// Determine document type.
switch (document.Type)
{
case SolidEdgeFramework.DocumentTypeConstants.igAssemblyDocument:
assemblyDocument = (SolidEdgeAssembly.AssemblyDocument)document;
asmRefPlanes = assemblyDocument.AsmRefPlanes;
for (int i = 1; i <= asmRefPlanes.Count; i++)
{
selectSet.Add(asmRefPlanes.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igDraftDocument:
draftDocument = (SolidEdgeDraft.DraftDocument)document;
sheet = draftDocument.ActiveSheet;
drawingViews = sheet.DrawingViews;
for (int i = 1; i <= drawingViews.Count; i++)
{
draftDocument.SelectSet.Add(drawingViews.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igPartDocument:
partDocument = (SolidEdgePart.PartDocument)document;
edgeBarFeatures = partDocument.DesignEdgebarFeatures;
for (int i = 1; i <= edgeBarFeatures.Count; i++)
{
partDocument.SelectSet.Add(edgeBarFeatures.Item(i));
}
break;
case SolidEdgeFramework.DocumentTypeConstants.igSheetMetalDocument:
sheetMetalDocument = (SolidEdgePart.SheetMetalDocument)document;
edgeBarFeatures = sheetMetalDocument.DesignEdgebarFeatures;
for (int i = 1; i <= edgeBarFeatures.Count; i++)
{
partDocument.SelectSet.Add(edgeBarFeatures.Item(i));
}
break;
}
}
else
{
throw new System.Exception("No active document");
}
// Re-enable selectset UI display.
selectSet.ResumeDisplay();
// Manually refresh the selectset UI display.
selectSet.RefreshDisplay();
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
// Riempie una lista con le scale delle viste del draft
public string CreaListaScale()
{
string messaggio = ""; // Cancella i dati preesistenti
listaScale.Clear();
try {
application = (SolidEdgeFramework.Application)System.Runtime.InteropServices.Marshal.GetActiveObject("SolidEdge.Application");
} catch {
messaggio = "Nessuna istanza attiva";
application = null;
}
try {
document = (SolidEdgeFramework.SolidEdgeDocument)application.ActiveDocument;
if (document.Type == DocumentTypeConstants.igDraftDocument) // Se e` un draft...
{
int count, i; // ... estrae le viste del foglio attivo
double scala;
string tScala;
drawingViews = ((SolidEdgeDraft.DraftDocument)document).ActiveSheet.DrawingViews;
count = drawingViews.Count;
for (i = 0; i < count; i++) // Percorre le viste
{
drawingView = drawingViews.Item(i+1);
scala = drawingView.ScaleFactor;
if(scala >= 1.0)
tScala = scala.ToString()+":1";
else
tScala = "1:"+(1.0/scala).ToString();
listaScale.Add(tScala);
}
}
else {
messaggio = "Non e` un draft";
}
} catch (System.Exception ex) // Messaggio se eccezione
{
messaggio = "Eccezione: " + ex.Message + " + Nessun documento attivo";
}
finally {
if (drawingViews != null) {
foreach (SolidEdgeDraft.DrawingView drawingView in drawingViews) {
Marshal.ReleaseComObject(drawingView);
}
}
if (drawingViews != null) {
Marshal.ReleaseComObject(drawingViews);
drawingViews = null;
}
if (document != null) {
Marshal.ReleaseComObject(document);
document = null;
}
if (application != null) {
Marshal.ReleaseComObject(application);
application = null;
}
}
return messaggio;
}
