/// <summary>
/// Adds the support settings to true of false to the configRaftSuppor SkeinConfig object.
/// </summary>
/// <param name="configRaftSupport"></param>
private void AddSupportConfiguration(SkeinConfig configRaftSupport)
{
if (Main.main.slicerPanel.generateSupportCheckbox.Checked == true)
{
configRaftSupport.setValue("None", "False");
configRaftSupport.setValue("Empty Layers Only", "False");
configRaftSupport.setValue("Exterior Only", "False");
configRaftSupport.setValue("Everywhere", "True");
}
else
{
configRaftSupport.setValue("None", "True");
configRaftSupport.setValue("Everywhere", "False");
configRaftSupport.setValue("Empty Layers Only", "False");
configRaftSupport.setValue("Exterior Only", "False");
}
//throw new NotImplementedException();
}
/// <summary>
/// Adds the Raft configuration to true or false based on the main printer settings. Modifies the SkienConfig object.
/// </summary>
/// <param name="configRaftSupport"></param>
private void AddRaftConfiguration(SkeinConfig configRaftSupport)
{
if (Main.main.slicerPanel.generateRaftCheckbox.Checked == true)
{
configRaftSupport.setValue("Activate Raft", "True");
configRaftSupport.setValue("Add Raft, Elevate Nozzle, Orbit:", "True");
configRaftSupport.setValue("Base Layers (integer):", "5");
configRaftSupport.setValue("Interface Layers (integer):", "3");
}
else
{
// These must be true, to allow support generation, but we will set the raft to 0 to remove the raft.
configRaftSupport.setValue("Activate Raft", "True");
configRaftSupport.setValue("Add Raft, Elevate Nozzle, Orbit:", "True");
configRaftSupport.setValue("Base Layers (integer):", "0");
configRaftSupport.setValue("Interface Layers (integer):", "0");
////configRaftSupport.setValue("Activate Raft", "False");
////configRaftSupport.setValue("Add Raft, Elevate Nozzle, Orbit:", "False");
}
// throw new NotImplementedException();
}
public void RunSlice(string file, string profile)
{
if (procConvert != null)
{
MessageBox.Show(Trans.T("L_SKEIN_STILL_RUNNING") /*"Last slice job still running. Slicing of new job is canceled."*/, Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
profileConfig = new SkeinConfig(BasicConfiguration.basicConf.SkeinforgeProfileDir + Path.DirectorySeparatorChar + "skeinforge_profile.csv");
extrusionConfig = new SkeinConfig(BasicConfiguration.basicConf.SkeinforgeProfileDir + Path.DirectorySeparatorChar + "extrusion.csv");
exportConfig = new SkeinConfig(BasicConfiguration.basicConf.SkeinforgeProfileDir + Path.DirectorySeparatorChar + "extrusion" +
Path.DirectorySeparatorChar + profile + Path.DirectorySeparatorChar + "export.csv");
multiplyConfig = new SkeinConfig(BasicConfiguration.basicConf.SkeinforgeProfileDir + Path.DirectorySeparatorChar + "extrusion" +
Path.DirectorySeparatorChar + profile + Path.DirectorySeparatorChar + "multiply.csv");
// Set profile to extrusion
/* cutting False
* extrusion True
* milling False
* winding False
*/
profileConfig.setValue("cutting", "False");
profileConfig.setValue("milling", "False");
profileConfig.setValue("extrusion", "True");
profileConfig.setValue("winding", "False");
profileConfig.writeModified();
// Set used profile
extrusionConfig.setValue("Profile Selection:", profile);
extrusionConfig.writeModified();
// Set export to correct values
exportConfig.setValue("Activate Export", "True");
exportConfig.setValue("Add Profile Extension", "False");
exportConfig.setValue("Add Profile Name to Filename", "False");
exportConfig.setValue("Add Timestamp Extension", "False");
exportConfig.setValue("Add Timestamp to Filename", "False");
exportConfig.setValue("Add Description to Filename", "False");
exportConfig.setValue("Add Descriptive Extension", "False");
exportConfig.writeModified();
multiplyConfig.setValue("Activate Multiply:", "False");
multiplyConfig.setValue("Activate Multiply: ", "False");
multiplyConfig.setValue("Activate Multiply", "False");
multiplyConfig.writeModified();
string target = StlToGCode(file);
if (File.Exists(target))
{
File.Delete(target);
}
procConvert = new Process();
try
{
SlicingInfo.Start(name);
SlicingInfo.SetAction(Trans.T("L_SLICING_STL_FILE...")); //"Slicing STL file ...");
slicefile = file;
procConvert.EnableRaisingEvents = true;
procConvert.Exited += new EventHandler(ConversionExited);
procConvert.StartInfo.FileName = Main.IsMono ? PyPy : wrapQuotes(PyPy);
procConvert.StartInfo.Arguments = wrapQuotes(textSkeinforgeCraft.Text) + " " + wrapQuotes(file);
procConvert.StartInfo.UseShellExecute = false;
procConvert.StartInfo.WorkingDirectory = textWorkingDirectory.Text;
procConvert.StartInfo.RedirectStandardOutput = true;
procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.StartInfo.RedirectStandardError = true;
procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.Start();
// Start the asynchronous read of the standard output stream.
procConvert.BeginOutputReadLine();
procConvert.BeginErrorReadLine();
//Main.main.tab.SelectedTab = Main.main.tabPrint;
}
catch (Exception e)
{
Main.conn.log(e.ToString(), false, 2);
RestoreConfigs();
}
}
public void RunSlice(string file, string profile)
{
if (procConvert != null)
{
MessageBox.Show(Trans.T("L_SKEIN_STILL_RUNNING") /*"Last slice job still running. Slicing of new job is canceled."*/, Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
string py = PyPy;
if (py == null)
{
MessageBox.Show(Trans.T("L_PYPY_NOT_FOUND"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
string craft = findCraft();
if (craft == null)
{
MessageBox.Show(Trans.T("L_SKEINCRAFT_NOT_FOUND"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
string profdir = findSkeinforgeProfiles();
if (profdir == null)
{
MessageBox.Show(Trans.T("L_SKEINCRAFT_PROFILES_NOT_FOUND"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
profileConfig = new SkeinConfig(Path.Combine(profdir, "skeinforge_profile.csv"));
extrusionConfig = new SkeinConfig(Path.Combine(profdir, "extrusion.csv"));
exportConfig = new SkeinConfig(Path.Combine(profdir, "extrusion" + Path.DirectorySeparatorChar + profile + Path.DirectorySeparatorChar + "export.csv"));
multiplyConfig = new SkeinConfig(Path.Combine(profdir, "extrusion" +
Path.DirectorySeparatorChar + profile + Path.DirectorySeparatorChar + "multiply.csv"));
raftAndSupportConfig = new SkeinConfig(Path.Combine(profdir, "extrusion" +
Path.DirectorySeparatorChar + profile + Path.DirectorySeparatorChar + "raft.csv"));
// Set profile to extrusion
/* cutting False
* extrusion True
* milling False
* winding False
*/
profileConfig.setValue("cutting", "False");
profileConfig.setValue("milling", "False");
profileConfig.setValue("extrusion", "True");
profileConfig.setValue("winding", "False");
profileConfig.writeModified();
// Set used profile
extrusionConfig.setValue("Profile Selection:", profile);
extrusionConfig.writeModified();
// Set export to correct values
exportConfig.setValue("Activate Export", "True");
exportConfig.setValue("Add Profile Extension", "False");
exportConfig.setValue("Add Profile Name to Filename", "False");
exportConfig.setValue("Add Timestamp Extension", "False");
exportConfig.setValue("Add Timestamp to Filename", "False");
exportConfig.setValue("Add Description to Filename", "False");
exportConfig.setValue("Add Descriptive Extension", "False");
exportConfig.writeModified();
multiplyConfig.setValue("Activate Multiply:", "False");
multiplyConfig.setValue("Activate Multiply: ", "False");
multiplyConfig.setValue("Activate Multiply", "False");
multiplyConfig.writeModified();
string target = StlToGCode(file);
if (File.Exists(target))
{
File.Delete(target);
}
// If we are in developer mode then don't add support or rafts or calibrate the height
if (!Main.main.DeveloperMode)
{
// Modify Start Code, Raft, and Support settings to reflect the current user settings
CalibrateHeightStartGcode(profdir);
AddRaftConfiguration(raftAndSupportConfig);
AddSupportConfiguration(raftAndSupportConfig);
raftAndSupportConfig.writeModified(); // write the modified raft.csv
}
procConvert = new Process();
try
{
SlicingInfo.Start(name);
SlicingInfo.SetAction(Trans.T("L_SLICING_STL_FILE...")); //"Slicing STL file ...");
slicefile = file;
procConvert.EnableRaisingEvents = true;
procConvert.Exited += new EventHandler(ConversionExited);
procConvert.StartInfo.FileName = Main.IsMono ? py : wrapQuotes(py);
procConvert.StartInfo.Arguments = wrapQuotes(craft) + " " + wrapQuotes(file);
procConvert.StartInfo.UseShellExecute = false;
procConvert.StartInfo.WorkingDirectory = textWorkingDirectory.Text;
procConvert.StartInfo.RedirectStandardOutput = true;
procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.StartInfo.RedirectStandardError = true;
procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.Start();
// Start the asynchronous read of the standard output stream.
procConvert.BeginOutputReadLine();
procConvert.BeginErrorReadLine();
//Main.main.tab.SelectedTab = Main.main.tabPrint;
}
catch (Exception e)
{
Main.connection.log(e.ToString(), false, 2);
RestoreConfigs();
}
}