public Result Execute(UIControlledApplication application, string tabName)
{
#if Revit2020
MainWindowHandle = application.MainWindowHandle;
HwndSource hwndSource = HwndSource.FromHwnd(MainWindowHandle);
RevitWindow = hwndSource.RootVisual as Window;
#endif
#if Revit2018
try
{
MainWindowHandle = WindowHandleSearch.MainWindowHandle.Handle;
}
catch (Exception) { }
#endif
string assembly = Assembly.GetExecutingAssembly().Location.Split(new string[] { "\\" }, StringSplitOptions.None).Last().Split('.').First();
string ribbonName = "Проверки";
RibbonPanel panel = application.CreateRibbonPanel(tabName, ribbonName);
if (KPLN_Loader.Preferences.User.Department.Id == 4)
{
AddPushButtonData("Открыть менеджер проверок", "Серийная\nпроверка", "Запуск проверки выбранных документов на ошибки.", string.Format("{0}.{1}", assembly, "Commands.CommandOpenDialog"), panel, new Source.Source(Common.Collections.Icon.OpenManager), true);
}
AddPushButtonData("Открыть окно статистики", "Окно\ncтатистики", "Отображение статистики по документам, которые были проверены на ошибки.", string.Format("{0}.{1}", assembly, "Commands.CommandShowStatistics"), panel, new Source.Source(Common.Collections.Icon.Statistics), true);
panel.AddSlideOut();
if (KPLN_Loader.Preferences.User.Department.Id == 4)
{
AddPushButtonData("Параметры", "Параметры", "Редактирование пользовательских настроек.", string.Format("{0}.{1}", assembly, "Commands.CommandShowSettings"), panel, new Source.Source(Common.Collections.Icon.Preferences), true);
}
application.DialogBoxShowing += OnDialogBoxShowing;
application.ControlledApplication.ApplicationInitialized += OnInitialized;
application.ControlledApplication.FailuresProcessing += OnFailureProcessing;
application.ControlledApplication.DocumentOpened += OnOpened;
return(Result.Succeeded);
}
private void CreateTableRibbon(UIControlledApplication uiApp, string tabName)
{
RibbonPanel panel = uiApp.CreateRibbonPanel(tabName, "Таблицы");
PushButtonData dataRebarSketch = CreateButtonData("RebarSketch", "CommandCreatePictures3");
dataRebarSketch.Text = "Вед-ть\nдеталей";
panel.AddItem(dataRebarSketch);
PushButtonData dataAutonumber = CreateButtonData("Autonumber", "CommandStart");
panel.AddItem(dataAutonumber);
PushButtonData dataCollapseRebarSchedule = CreateButtonData("CollapseRebarSchedule", "Command");
dataCollapseRebarSchedule.Text = "Подчистить\nВРС";
panel.AddItem(dataCollapseRebarSchedule);
PushButtonData pbdRefreshSchedules = CreateButtonData("BatchPrintYay", "CommandRefreshSchedules");
PushButtonData dataSchedulesTable = CreateButtonData("SchedulesTable", "CommandCreateTable");
PushButtonData dataRevisions = CreateButtonData("RevisionClouds", "Command");
panel.AddStackedItems(pbdRefreshSchedules, dataSchedulesTable, dataRevisions);
panel.AddSlideOut();
PushButtonData dataScetchConstructor = CreateButtonData("RebarSketch", "CommandFormGenerator");
panel.AddItem(dataScetchConstructor);
}
/// <summary>
/// Create our own ribbon panel with verious buttons
/// for our exercise. We re-use commands defined in the
/// Revit Intro Labs here. Cf. Section 3.8 (pp 46) of
/// the Developers Guide.
/// </summary>
public void AddRibbonSampler(UIControlledApplication app)
{
// (1) create a ribbon tab and ribbon panel
app.CreateRibbonTab("Ribbon Sampler");
RibbonPanel panel = app.CreateRibbonPanel("Ribbon Sampler", "Ribbon Sampler");
// Below are samplers of ribbon items. Uncomment
// functions of your interest to see how it looks like
// (2.1) add a simple push button for Hello World
AddPushButton(panel);
// (2.2) add split buttons for "Command Data", "DB Element" and "Element Filtering"
AddSplitButton(panel);
// (2.3) add pulldown buttons for "Command Data", "DB Element" and "Element Filtering"
AddPulldownButton(panel);
// (2.4) add radio/toggle buttons for "Command Data", "DB Element" and "Element Filtering"
// we put it on the slide-out below.
//AddRadioButton(panel);
//panel.AddSeparator();
// (2.5) add text box - TBD: this is used with the conjunction with event. Probably too complex for day one training.
// for now, without event.
// we put it on the slide-out below.
//AddTextBox(panel);
//panel.AddSeparator();
// (2.6) combo box - TBD: this is used with the conjunction with event. Probably too complex for day one training.
// For now, without event. show two groups: Element Bascis (3 push buttons) and Modification/Creation (2 push button)
AddComboBox(panel);
// (2.7) stacked items - 1. hello world push button, 2. pulldown element bscis (command data, DB element, element filtering)
// 3. pulldown modification/creation(element modification, model creation).
AddStackedButtons_Complex(panel);
// (2.8) slide out - if you don't have enough space, you can add additional space below the panel.
// anything which comes after this will be on the slide out.
panel.AddSlideOut();
// (2.4) radio button - what it is
AddRadioButton(panel);
// (2.5) text box - what it is
AddTextBox(panel);
}
private void CreateVisibilitySwitcherCommandsOnRibbonAsSlideOut()
{
_ribbonPanel.AddSlideOut();
PulldownButtonData pdbd =
new PulldownButtonData("VisibiitySwitcher", "VisibiitySwitcher");
PulldownButton pulldownButton = _ribbonPanel.AddItem(pdbd) as PulldownButton;
foreach (var commandSetting in _settingsInterpreter.VisibilitySwitcherCommandSettings)
{
PushButtonData dynamicCommandPushButton =
CreateVisibilitySwitcherPushButtonDataFromSetting(commandSetting);
dynamicCommandPushButton.ToolTip = commandSetting.VisibilityNameRegex;
pulldownButton.AddPushButton(dynamicCommandPushButton);
}
}
private void AddSlideOut(RibbonPanel panel)
{
string assembly = @"D:\Sample\HelloWorld\bin\Debug\Hello.dll";
panel.AddSlideOut();
// create some controls for the slide out
PushButtonData b1 = new PushButtonData("ButtonName1", "Button 1",
assembly, "Hello.HelloButton");
b1.LargeImage =
new System.Windows.Media.Imaging.BitmapImage(new Uri(@"D:\Sample\HelloWorld\bin\Debug\39-Globe_32x32.png"));
PushButtonData b2 = new PushButtonData("ButtonName2", "Button 2",
assembly, "Hello.HelloTwo");
b2.LargeImage =
new System.Windows.Media.Imaging.BitmapImage(new Uri(@"D:\Sample\HelloWorld\bin\Debug\39-Globe_16x16.png"));
panel.AddItem(b1);
panel.AddItem(b2);
}
private void OnButtonCreate(UIControlledApplication application, RibbonPanel ribbonPanel, PanelInfo panel)
{
string executableLocation = Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location);
foreach (var button in panel.Buttons)
{
buttonFactory(ribbonPanel, executableLocation, button);
}
var slideout = panel.SlideOut;
if (slideout == null || slideout.Count() == 0)
{
return;
}
ribbonPanel.AddSlideOut();
foreach (var button in slideout)
{
buttonFactory(ribbonPanel, executableLocation, button);
}
}
public void AddElec_WTA_ELEC_Ribbon(UIControlledApplication a)
{
string ExecutingAssemblyPath = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ExecutingAssemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
// create ribbon tab
String thisNewTabName = "WTA-ELEC";
try {
a.CreateRibbonTab(thisNewTabName);
} catch (Autodesk.Revit.Exceptions.ArgumentException) {
// Assume error generated is due to "WTA" already existing
}
// Add ribbon panels.
String thisNewPanelBe = "Be This";
RibbonPanel thisNewRibbonPanelBe = a.CreateRibbonPanel(thisNewTabName, thisNewPanelBe);
String thisNewPanelNamLFixt = "Light Fixtures";
RibbonPanel thisNewRibbonPanelLFixt = a.CreateRibbonPanel(thisNewTabName, thisNewPanelNamLFixt);
String thisNewPanelNameAim = "Aiming Lights";
RibbonPanel thisNewRibbonPanelAim = a.CreateRibbonPanel(thisNewTabName, thisNewPanelNameAim);
//System.Windows.MessageBox.Show(a.GetRibbonPanels(thisNewTabName).Count.ToString());
// Create push buttons
PushButtonData pbTwoPickTagLight = new PushButtonData("TwoPickLightingTag", "Two Pick\nLighting Tag", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickLightingTag");
PushButtonData pbTwoPickTagSwitch = new PushButtonData("TwoPickSwitchTag", "Two Pick\nDevice Tag", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickSwitchTag");
PushButtonData pbTwoPickAimLight = new PushButtonData("AimLight", " Aim ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickLightRot");
PushButtonData pbAimManyLights = new PushButtonData("AimManyLights", " Aim Many", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdAimManyLights");
PushButtonData pbBeLighting = new PushButtonData("BeLighting", "Lighting", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdBeLightingWorkSet");
PushButtonData pbBePower = new PushButtonData("BePower", "Power", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdBePowerWorkSet");
PushButtonData pbBeAuxiliary = new PushButtonData("BeAuxiliary", "Auxiliary", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdBeAuxiliaryWorkSet");
PushButtonData pbSelOnlyLights = new PushButtonData("SelOnlyLightFix", "Only Fixtures", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPickOnlyLights");
PushButtonData pbSelOnlyDevices = new PushButtonData("SelOnlyDevices", "Only Devices", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPickOnlyDevices");
PushButtonData pbLightingReporter = new PushButtonData("LRPT", "Room Picker", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdRoomLightingReporter");
PushButtonData pbLightingTotReport = new PushButtonData("LRPTOT", "LPD Totalizer", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdRoomsLightPwrDensityReport");
PushButtonData pbOCCDetTool = new PushButtonData("OCCDetTool", "OCC Det Tool", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceOCCSensorToolInstance");
pbOCCDetTool.ToolTip = "Places Occupancy sensor detection tool.";
string lDescOCCDetTool = "Requires a linked ceiling pick to set the sensor detection family tool's parameter. The tool adjusts the detection pattern " +
"according to the ceiling height from the ceiling pick. Without a ceiling, place otherwise and manually change the instance parameter as needed. " +
"Use the family's type selector to get the detection pattern you are interested in. " +
"The tool is placed on a diagnostic workset that will be created if needed.";
pbOCCDetTool.LongDescription = lDescOCCDetTool;
pbOCCDetTool.ToolTipImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SENSDETLG.PNG");
pbOCCDetTool.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SENSDETSM.PNG");
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
pbTwoPickTagLight.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TwoPickTag.png");
pbTwoPickTagSwitch.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TwoPickTagSwitch.png");
// add button tips (when data, must be defined prior to adding button.)
pbTwoPickTagLight.ToolTip = "Places lighting tag in two or less picks.";
pbTwoPickTagSwitch.ToolTip = "Places device tag in two or less picks.";
pbTwoPickAimLight.ToolTip = "2D Aims a non hosted light.";
pbAimManyLights.ToolTip = "2D Aims a selection of non hosted lights.";
pbBeLighting.ToolTip = "Switch to Lighting Workset.";
pbBePower.ToolTip = "Switch to Power Workset.";
pbBeAuxiliary.ToolTip = "Switch to Auxiliary Workset.";
pbSelOnlyLights.ToolTip = "Selecting only lighting fixtures.";
pbSelOnlyDevices.ToolTip = "Selecting only lighting devices.";
pbLightingReporter.ToolTip = "Reports on all lighting in a room.";
string lDescpbTwoPickTagLight = "Places the lighting tag in two picks.\nThe first pick selects the light fixture.\nThe second pick is the tag location.";
string lDescpbTwoPickAimLight = "Pick a light.\nThen pick where it is supposed to aim.";
string lDescpbAimManyLights = "Select a bunch of lights.\nThen pick the one spot where they all should aim towards.";
string lDescpb3DAim = "The special element has to be a Sprinkler category family instance.";
string lDescSelOnlyLights = "Swipe over anything. Only lighting fixtures are selected.";
string lDescSelOnlyDevices = "Swipe over anything. Only lighting devices are selected.";
string lDescBeLighting = "If you can't beat'm, join'm. Become Elec Lighting workset.";
string lDescBePower = "If you can't beat'm, join'm. Become Elec Power workset.";
string lDescBeAuxiliary = "If you can't beat'm, join'm. Become Elec Auxiliary workset.";
pbTwoPickTagLight.LongDescription = lDescpbTwoPickTagLight;
pbTwoPickAimLight.LongDescription = lDescpbTwoPickAimLight;
pbAimManyLights.LongDescription = lDescpbAimManyLights;
pbSelOnlyLights.LongDescription = lDescSelOnlyLights;
pbSelOnlyDevices.LongDescription = lDescSelOnlyDevices;
pbBeLighting.LongDescription = lDescBeLighting;
pbBePower.LongDescription = lDescBePower;
pbBeAuxiliary.LongDescription = lDescBeAuxiliary;
// add to ribbon panelA
List <RibbonItem> projectButtonsA = new List <RibbonItem>();
projectButtonsA.AddRange(thisNewRibbonPanelBe.AddStackedItems(pbBeLighting, pbBePower, pbBeAuxiliary));
// add to ribbon panelB
thisNewRibbonPanelLFixt.AddItem(pbTwoPickTagLight);
thisNewRibbonPanelLFixt.AddItem(pbTwoPickTagSwitch);
thisNewRibbonPanelLFixt.AddSeparator();
List <RibbonItem> projectButtonsB = new List <RibbonItem>();
projectButtonsB.AddRange(thisNewRibbonPanelLFixt.AddStackedItems(pbSelOnlyLights, pbSelOnlyDevices));
thisNewRibbonPanelLFixt.AddSeparator();
List <RibbonItem> projectButtonsBB = new List <RibbonItem>();
projectButtonsBB.AddRange(thisNewRibbonPanelLFixt.AddStackedItems(pbLightingReporter, pbOCCDetTool, pbLightingTotReport));
// add to ribbon panelC
List <RibbonItem> projectButtonsC = new List <RibbonItem>();
projectButtonsC.AddRange(thisNewRibbonPanelAim.AddStackedItems(pbTwoPickAimLight, pbAimManyLights));
//projectButtons.AddRange(thisNewRibbonPanel.AddStackedItems(pbData2DN, pbData4DN, pbDataAPN));
thisNewRibbonPanelBe.AddSlideOut();
PushButtonData bInfo = new PushButtonData("Info", "Info", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdOpenDocFolder");
bInfo.ToolTip = "See the help document regarding this.";
bInfo.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".InfoLg.png");
thisNewRibbonPanelBe.AddItem(bInfo);
thisNewRibbonPanelLFixt.AddSlideOut();
thisNewRibbonPanelLFixt.AddItem(bInfo);
} // AddMech_WTA_Elec_Ribbon
/// <summary>
/// This method is used to create RibbonSample panel, and add wall related command buttons to it:
/// 1. contains a SplitButton for user to create Non-Structural or Structural Wall;
/// 2. contains a StackedBotton which is consisted with one PushButton and two Comboboxes,
/// PushButon is used to reset all the RibbonItem, Comboboxes are use to select Level and WallShape
/// 3. contains a RadioButtonGroup for user to select WallType.
/// 4. Adds a Slide-Out Panel to existing panel with following functionalities:
/// 5. a text box is added to set mark for new wall, mark is a instance parameter for wall,
/// Eg: if user set text as "wall", then Mark for each new wall will be "wall1", "wall2", "wall3"....
/// 6. a StackedButton which consisted of a PushButton (delete all the walls) and a PulldownButton (move all the walls in X or Y direction)
/// </summary>
/// <param name="application">An object that is passed to the external application
/// which contains the controlled application.</param>
private void CreateRibbonSamplePanel(UIControlledApplication application)
{
// create a Ribbon panel which contains three stackable buttons and one single push button.
string firstPanelName = "Ribbon Sample";
RibbonPanel ribbonSamplePanel = application.CreateRibbonPanel(firstPanelName);
#region Create a SplitButton for user to create Non-Structural or Structural Wall
SplitButtonData splitButtonData = new SplitButtonData("NewWallSplit", "Create Wall");
SplitButton splitButton = ribbonSamplePanel.AddItem(splitButtonData) as SplitButton;
PushButton pushButton = splitButton.AddPushButton(new PushButtonData("WallPush", "Wall", AddInPath, "Revit.SDK.Samples.Ribbon.CS.CreateWall"));
pushButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWall.png"), UriKind.Absolute));
pushButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWall-S.png"), UriKind.Absolute));
pushButton.ToolTip = "Creates a partition wall in the building model.";
pushButton.ToolTipImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWallTooltip.bmp"), UriKind.Absolute));
pushButton = splitButton.AddPushButton(new PushButtonData("StrWallPush", "Structure Wall", AddInPath, "Revit.SDK.Samples.Ribbon.CS.CreateStructureWall"));
pushButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "StrcturalWall.png"), UriKind.Absolute));
pushButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "StrcturalWall-S.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
#region Add a StackedButton which is consisted of one PushButton and two Comboboxes
PushButtonData pushButtonData = new PushButtonData("Reset", "Reset", AddInPath, "Revit.SDK.Samples.Ribbon.CS.ResetSetting");
ComboBoxData comboBoxDataLevel = new ComboBoxData("LevelsSelector");
ComboBoxData comboBoxDataShape = new ComboBoxData("WallShapeComboBox");
IList <RibbonItem> ribbonItemsStacked = ribbonSamplePanel.AddStackedItems(pushButtonData, comboBoxDataLevel, comboBoxDataShape);
((PushButton)(ribbonItemsStacked[0])).Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Reset.png"), UriKind.Absolute));
//Add options to WallShapeComboBox
Autodesk.Revit.UI.ComboBox comboboxWallShape = (Autodesk.Revit.UI.ComboBox)(ribbonItemsStacked[2]);
ComboBoxMemberData comboBoxMemberData = new ComboBoxMemberData("RectangleWall", "RectangleWall");
ComboBoxMember comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "RectangleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("CircleWall", "CircleWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CircleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("TriangleWall", "TriangleWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "TriangleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("SquareWall", "SquareWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "SquareWall.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
#region Add a RadioButtonGroup for user to select WallType
RadioButtonGroupData radioButtonGroupData = new RadioButtonGroupData("WallTypeSelector");
RadioButtonGroup radioButtonGroup = (RadioButtonGroup)(ribbonSamplePanel.AddItem(radioButtonGroupData));
ToggleButton toggleButton = radioButtonGroup.AddItem(new ToggleButtonData("Generic8", "Generic - 8\"", AddInPath, "Revit.SDK.Samples.Ribbon.CS.Dummy"));
toggleButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Generic8.png"), UriKind.Absolute));
toggleButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Generic8-S.png"), UriKind.Absolute));
toggleButton = radioButtonGroup.AddItem(new ToggleButtonData("ExteriorBrick", "Exterior - Brick", AddInPath, "Revit.SDK.Samples.Ribbon.CS.Dummy"));
toggleButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "ExteriorBrick.png"), UriKind.Absolute));
toggleButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "ExteriorBrick-S.png"), UriKind.Absolute));
#endregion
//slide-out panel:
ribbonSamplePanel.AddSlideOut();
#region add a Text box to set the mark for new wall
TextBoxData testBoxData = new TextBoxData("WallMark");
Autodesk.Revit.UI.TextBox textBox = (Autodesk.Revit.UI.TextBox)(ribbonSamplePanel.AddItem(testBoxData));
textBox.Value = "new wall"; //default wall mark
textBox.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "WallMark.png"), UriKind.Absolute));
textBox.ToolTip = "Set the mark for new wall";
textBox.ShowImageAsButton = true;
textBox.EnterPressed += new EventHandler <Autodesk.Revit.UI.Events.TextBoxEnterPressedEventArgs>(SetTextBoxValue);
#endregion
ribbonSamplePanel.AddSeparator();
#region Create a StackedButton which consisted of a PushButton (delete all the walls) and a PulldownButton (move all the walls in X or Y direction)
PushButtonData deleteWallsButtonData = new PushButtonData("deleteWalls", "Delete Walls", AddInPath, "Revit.SDK.Samples.Ribbon.CS.DeleteWalls");
deleteWallsButtonData.ToolTip = "Delete all the walls created by the Create Wall tool.";
deleteWallsButtonData.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "DeleteWalls.png"), UriKind.Absolute));
PulldownButtonData moveWallsButtonData = new PulldownButtonData("moveWalls", "Move Walls");
moveWallsButtonData.ToolTip = "Move all the walls in X or Y direction";
moveWallsButtonData.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWalls.png"), UriKind.Absolute));
// create stackable buttons
IList <RibbonItem> ribbonItems = ribbonSamplePanel.AddStackedItems(deleteWallsButtonData, moveWallsButtonData);
// add two push buttons as sub-items of the moveWalls PulldownButton.
PulldownButton moveWallItem = ribbonItems[1] as PulldownButton;
PushButton moveX = moveWallItem.AddPushButton(new PushButtonData("XDirection", "X Direction", AddInPath, "Revit.SDK.Samples.Ribbon.CS.XMoveWalls"));
moveX.ToolTip = "move all walls 10 feet in X direction.";
moveX.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWallsXLarge.png"), UriKind.Absolute));
PushButton moveY = moveWallItem.AddPushButton(new PushButtonData("YDirection", "Y Direction", AddInPath, "Revit.SDK.Samples.Ribbon.CS.YMoveWalls"));
moveY.ToolTip = "move all walls 10 feet in Y direction.";
moveY.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWallsYLarge.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
application.ControlledApplication.DocumentCreated += new EventHandler <Autodesk.Revit.DB.Events.DocumentCreatedEventArgs>(DocumentCreated);
}
/// <summary>
/// Adds a slide out in the current panel.
/// </summary>
public void AddSlideOut()
{
panel.AddSlideOut();
}
public void Add_WTA_FP_Ribbon(UIControlledApplication a)
{
string ExecutingAssemblyPath = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ExecutingAssemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
// create ribbon tab
String thisTabNameFP = "WTA-FP";
try {
a.CreateRibbonTab(thisTabNameFP);
} catch (Autodesk.Revit.Exceptions.ArgumentException) {
// Assume error generated is due to "WTA" already existing
}
#region Add ribbon panels.
// Add ribbon panels.
String thisPanelNamBe = "Be This";
RibbonPanel thisRibbonPanelBe = a.CreateRibbonPanel(thisTabNameFP, thisPanelNamBe);
String thisPanelNameSprinklers = "Sprinklers";
RibbonPanel thisRibbonPanelSprinklers = a.CreateRibbonPanel(thisTabNameFP, thisPanelNameSprinklers);
String thisPanelNameAiming = "3d Aiming";
RibbonPanel thisRibbonPanelAiming = a.CreateRibbonPanel(thisTabNameFP, thisPanelNameAiming);
#endregion
///Note that the full image name is namespace_prefix + "." + the actual imageName);
///pushButton.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), "PlunkOMaticTCOM.QVis.png");
// Create push button in this ribbon panel
PushButtonData pbDataSprnkConc = new PushButtonData("SprnkConc", "Concealed", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceConcealedSprinklerInstance");
PushButtonData pbDataSprnkRec = new PushButtonData("SprnkRec", "Recessed", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceRecessedSprinklerInstance");
PushButtonData pbDataSprnkPend = new PushButtonData("SprnkPend", "Pendent", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlacePendentSprinklerInstance");
PushButtonData pbDataSprnkUp = new PushButtonData("SprnkUp", "Upright", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceUprightSprinklerInstance");
PushButtonData pbDataOppArray = new PushButtonData("OppArray", "Design Array", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceSprinklerArrayTool");
PushButtonData pbDataOppArea = new PushButtonData("OppArea", "Oper Area", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceSprinklerOperAreaTool");
PushButtonData pbDataSelectOnlySprink = new PushButtonData("SelSprnk", "PickOnly", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPickSprinksOnly");
PushButtonData pbDataSetSprinkOps = new PushButtonData("SprnkOps", "Sprnk Ops", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdResetThisSprnkOps");
pbDataSetSprinkOps.ToolTip = "Set design tool sprinkler spacing data.";
string lDescDT = "The Design Array and Oper Area layout tool families take parameters";
lDescDT += " that control the sprinkler operation area, spacing and array sizes. Those";
lDescDT += " parameters can be set ahead of time as a persistent user settings so that";
lDescDT += " it is not necessary to use the Revit properties setter to affect the desired values.";
lDescDT += " The Sprnk Ops tool sets those values and allows you to apply them to a pick.";
pbDataSetSprinkOps.LongDescription = lDescDT;
pbDataSetSprinkOps.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SprnkOps.png");
pbDataSetSprinkOps.ToolTipImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SetOpArea.PNG");
PushButtonData pbBeFP = new PushButtonData("BeFP", "FireP", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdBeFPWorkSet");
pbBeFP.ToolTip = "Switch to Fire Protection Workset.";
string lDescBeFP = "If you can't beat'm, join'm. Become FIRE PROTECTION workset.";
pbBeFP.LongDescription = lDescBeFP;
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
pbDataSprnkUp.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".Upright.png");
pbDataSprnkConc.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".Concealed.png");
pbDataSprnkPend.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".Pendent.png");
pbDataSprnkRec.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".Recessed.png");
pbDataOppArea.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".OpArea.png");
pbDataOppArray.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".OpArray.png");
pbDataSelectOnlySprink.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".PickOnlySprnk16x16.png");
pbDataSelectOnlySprink.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".PickOnlySprnk32x32.png");
// add button tips (when data, must be defined prior to adding button.)
pbDataSprnkConc.ToolTip = "Concealed Sprinkler";
pbDataSprnkRec.ToolTip = "Recessed Sprinkler";
pbDataSprnkPend.ToolTip = "Pendent Sprinkler";
pbDataSprnkUp.ToolTip = "Upright Sprinkler";
pbDataOppArea.ToolTip = "Operation Area Tool";
pbDataOppArray.ToolTip = "Array Design Tool";
pbDataSelectOnlySprink.ToolTip = "Pick Only Sprinklers";
string lDesc = "Places a sprinkler at the ceiling elevation set by picking a ceiling (if prompted).\n\n\u00A7 Workset will be FIRE PROTECTION.";
string lDescTool = "Places a sprinkler design tool at the ceiling elevation set by picking a ceiling.\n\n\u00A7 Workset will be FIRE PROTECTION.";
string lDescPickOnlyS = "Swipe over anything. Only sprinklers are selected.";
pbDataSprnkConc.LongDescription = lDesc;
pbDataSprnkRec.LongDescription = lDesc;
pbDataSprnkPend.LongDescription = lDesc;
pbDataSprnkUp.LongDescription = lDesc;
pbDataOppArray.LongDescription = lDescTool;
pbDataOppArea.LongDescription = lDescTool;
pbDataSelectOnlySprink.LongDescription = lDescPickOnlyS;
RadioButtonGroupData rbgdSTD_EC = new RadioButtonGroupData("rbgdSTD_EC");
RadioButtonGroup rbgSTD_EC = thisRibbonPanelSprinklers.AddItem(rbgdSTD_EC) as RadioButtonGroup;
ToggleButtonData tbSTD = new ToggleButtonData("tbSTD", " STD ",
ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetAs_STD");
ToggleButtonData tbEC = new ToggleButtonData("tbEC", " EC ",
ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetAs_EC");
tbSTD.ToolTip = "Standard Coverage \nsprinklers will be placed.";
tbEC.ToolTip = "Extended Coverage \nsprinklers will be placed.";
tbEC.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".bt_EC.png");
tbSTD.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".bt_STD.png");
rbgSTD_EC.AddItem(tbSTD);
rbgSTD_EC.AddItem(tbEC);
// Not working
//pbDataToggle_STD_EC = new PushButtonData("togbutdata_TOG_STD_EC", "STD/EC", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTogState_STD_EC");
//pbDataToggle_STD_EC.ToolTip = "Standard Coverage/Extended Coverage"; // undetermined at this point
//pbDataToggle_STD_EC.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".bt_STD24x24.png");
//PushButton pushbutdata_TOG_STD_EC = thisNewRibbonPanel.AddItem(pbDataToggle_STD_EC) as PushButton;
PushButtonData b1x1 = new PushButtonData("OSET_1x1", "1x1", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState1x1");
PushButtonData b2x1 = new PushButtonData("OSET_2x1", "2x1", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState2x1");
PushButtonData b3x1 = new PushButtonData("OSET_3x1", "3x1", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState3x1");
PushButtonData b1x2 = new PushButtonData("OSET_1x2", "1x2", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState1x2");
PushButtonData b1x3 = new PushButtonData("OSET_1x3", "1x3", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState1x3");
PushButtonData b0x0 = new PushButtonData("OSET_0x0", "0x0", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSetOffsetState0x0");
b1x1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B1x1.png");
b2x1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B2x1.png");
b3x1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B3x1.png");
b1x2.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B1x2.png");
b1x3.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B1x3.png");
b0x0.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".B0x0.png");
b1x1.ToolTip = "Item placement will be offset\n" +
"1' by 1' from the pick point.\n" +
"Think lay-in ceiling tile.";
b2x1.ToolTip = "Item placement will be offset\n" +
"2' by 1' from the pick point.\n" +
"Think lay-in ceiling tile.";
b3x1.ToolTip = "Item placement will be offset\n" +
"3' by 1' from the pick point.\n" +
"Think lay-in ceiling tile.";
b1x2.ToolTip = "Item placement will be offset\n" +
"1' by 2' from the pick point.\n" +
"Think lay-in ceiling tile.";
b1x3.ToolTip = "Item placement will be offset\n" +
"1' by 3' from the pick point.\n" +
"Think lay-in ceiling tile.";
b0x0.ToolTip = "Item placement will be at the\n" +
"pick point.";
SplitButtonData sbOffSetData = new SplitButtonData("splitOffSets", "Loc");
SplitButton sbOffSet = thisRibbonPanelSprinklers.AddItem(sbOffSetData) as SplitButton;
sbOffSet.AddPushButton(b1x1);
sbOffSet.AddPushButton(b2x1);
sbOffSet.AddPushButton(b3x1);
sbOffSet.AddPushButton(b1x2);
sbOffSet.AddPushButton(b1x3);
sbOffSet.AddPushButton(b0x0);
#region 3dAiming
PushButtonData pbReset3dAiming = new PushButtonData("Reset3dAim", "Reset 3D Aiming", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdAimResetRotateOne3DMany");
PushButtonData pbSingle3dAiming = new PushButtonData("Single3DAim", "Single 3D Aim", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSprinkRot3D");
PushButtonData pbMany3dAiming = new PushButtonData("Many3dAim", "Many 3D Aim", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSprinkRot3DMany");
pbReset3dAiming.ToolTip = "Reset 3D aimed objects\n" +
"to zero state.";
pbSingle3dAiming.ToolTip = "3D aim a single object\n" +
"to a target point.";
pbMany3dAiming.ToolTip = "3D aim multiple objects\n" +
"to the same target point.";
#endregion
// add to ribbon panelA
// List<RibbonItem> projectButtonsBe = new List<RibbonItem>();
// projectButtonsBe.AddRange(thisRibbonPanelBe.AddStackedItems(pbBeFP, another etc));
thisRibbonPanelBe.AddItem(pbBeFP);
// add to ribbon panel
List <RibbonItem> sprnkButtons = new List <RibbonItem>();
sprnkButtons.AddRange(thisRibbonPanelSprinklers.AddStackedItems(pbDataSprnkConc, pbDataSprnkRec, pbDataSprnkPend));
sprnkButtons.AddRange(thisRibbonPanelSprinklers.AddStackedItems(pbDataSprnkUp, pbDataOppArray, pbDataOppArea));
thisRibbonPanelSprinklers.AddSeparator();
PushButton pushButtonSprnkOps = thisRibbonPanelSprinklers.AddItem(pbDataSetSprinkOps) as PushButton;
thisRibbonPanelSprinklers.AddSeparator();
PushButton pushButtonSelSprnk = thisRibbonPanelSprinklers.AddItem(pbDataSelectOnlySprink) as PushButton;
// This is to another panel. No separator needed.
List <RibbonItem> aimerButtons = new List <RibbonItem>();
aimerButtons.AddRange(thisRibbonPanelAiming.AddStackedItems(pbSingle3dAiming, pbMany3dAiming, pbReset3dAiming));
/// Anything added after slideout it declared can only be in the slideout
thisRibbonPanelBe.AddSlideOut();
PushButtonData bInfo = new PushButtonData("Info", "Info", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdOpenDocFolder");
bInfo.ToolTip = "See the help document regarding this.";
bInfo.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".InfoLg.png");
thisRibbonPanelBe.AddItem(bInfo);
thisRibbonPanelSprinklers.AddSlideOut();
thisRibbonPanelSprinklers.AddItem(bInfo);
} // AddRibbon
public void AddMech_WTA_MECH_Ribbon(UIControlledApplication a)
{
string ExecutingAssemblyPath = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ExecutingAssemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
// create ribbon tab
String thisNewTabName = "WTA-MECH";
try {
a.CreateRibbonTab(thisNewTabName);
} catch (Autodesk.Revit.Exceptions.ArgumentException) {
// Assume error generated is due to "WTA" already existing
}
// Add ribbon panels.
String thisPanelNamBe = "Be This";
RibbonPanel thisRibbonPanelBe = a.CreateRibbonPanel(thisNewTabName, thisPanelNamBe);
String thisPanelNameSensor = " Sensor ";
RibbonPanel thisRibbonPanelSensor = a.CreateRibbonPanel(thisNewTabName, thisPanelNameSensor);
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
//pushButton.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".QVis.png");
// Create push button in this ribbon panel
// Buttons for Sensor/Unit No leader - these will be used in a split button stack
PushButtonData pbMechStatUnit1 = new PushButtonData("SensForUnit1", "Sens for\nUnit ID/#", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceStatForMechUnitInstance1");
PushButtonData pbMechStatUnit2 = new PushButtonData("SensForUnit2", "Sens for\nUnit #", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceStatForMechUnitInstance2");
// The tool settings buttons
PushButtonData pbMechStatUnitSet1 = new PushButtonData("SensForUnitSet1", "Setting 1", ExecutingAssemblyPath, ExecutingAssemblyName + ".MechStatUnitSettings1");
PushButtonData pbMechStatUnitSet2 = new PushButtonData("SensForUnitSet2", "Setting 2", ExecutingAssemblyPath, ExecutingAssemblyName + ".MechStatUnitSettings2");
// Buttons for Sensor/Unit With leader - these will be used in a split button stack
PushButtonData pbMechStatUnitOff1 = new PushButtonData("SensForUnitOff1", "Sens w/L\nfor Unit ID/#", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceStatOffsetForMechUnitInstance1");
PushButtonData pbMechStatUnitOff2 = new PushButtonData("SensForUnitOff2", "Sens w/L\nfor Unit #", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceStatOffsetForMechUnitInstance2");
// The tool settings buttons
PushButtonData pbMechStatUnitOffSet1 = new PushButtonData("SensForUnitOffSet1", "Setting 1", ExecutingAssemblyPath, ExecutingAssemblyName + ".MechStatUnitOffSettings1");
PushButtonData pbMechStatUnitOffSet2 = new PushButtonData("SensForUnitOffSet2", "Setting 2", ExecutingAssemblyPath, ExecutingAssemblyName + ".MechStatUnitOffSettings2");
// Buttons for ID/# tag - these will be used in a split button stack
PushButtonData pbMechStatTag1 = new PushButtonData("Sens IDT", "ID/# Tag", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickMechSensorTagEuip1");
PushButtonData pbMechStatTag2 = new PushButtonData("Sens IDO", "# Tag", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickMechSensorTagEuip2");
// Buttons for ID/# Offset tag - these will be used in a split button stack
PushButtonData pbMechStatTagOff1 = new PushButtonData("Sens OffsetT", "ID/# Offset", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickMechSensorTagOffEuip1");
PushButtonData pbMechStatTagOff2 = new PushButtonData("Sens OffsetO", "# Offset", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickMechSensorTagOffEuip2");
PushButtonData pbBeMechHVAC = new PushButtonData("BeMechHVAC", "HVAC", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdBeMECH_HVACWorkSet");
pbBeMechHVAC.ToolTip = "Switch to Mech HVAC Workset.";
string lDescBeMechHVAC = "If you can't beat'm, join'm. Become MECH HVAC workset.";
pbBeMechHVAC.LongDescription = lDescBeMechHVAC;
// Split buttons
SplitButtonData sbMSU = new SplitButtonData("sbMSU", "Sens\nfor Unit");
SplitButtonData sbMSUO = new SplitButtonData("sbMSUO", "Sens w/L\nfor Unit");
SplitButtonData sbSTagReg = new SplitButtonData("sbSensTag", "Split Sens ID");
SplitButtonData sbSTagOff = new SplitButtonData("sbSensTagOff", "Split Sens Offset");
PushButtonData pbMechSpinStat = new PushButtonData("Sens Spin", "Sens Spin", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSpinStat");
PushButtonData pbMechTogSym = new PushButtonData("Sens Symb", "Sens Symb", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdSymbStat");
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
pbMechStatUnit1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TStatUnit_1.png");
pbMechStatUnitOff1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TStatUnitO_1.png");
pbMechStatUnit2.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TStatUnit_2.png");
pbMechStatUnitOff2.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TStatUnitO_2.png");
pbMechStatTag1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SensTag_IDNO.png");
pbMechStatTag2.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SensTag_NO.png");
pbMechStatTagOff1.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SensOffTag_IDNO.png");
pbMechStatTagOff2.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".SensOffTag_NO.png");
// add button tips (when data, must be defined prior to adding button.)
pbMechStatUnit1.ToolTip = "Places a Sensor Stat for mechanical equip with equip. tag.";
pbMechStatUnitOff1.ToolTip = "Places a Sensor Stat with leader for mechanical equip with equip. tag.";
pbMechStatUnit2.ToolTip = "Places a Sensor Stat for mechanical equip with equip. tag.";
pbMechStatUnitOff2.ToolTip = "Places a Sensor Stat with leader for mechanical equip with equip. tag.";
pbMechStatTag1.ToolTip = "Places ID and number equipment tag that is for Sensors.";
pbMechStatTagOff1.ToolTip = "Places offset Sensor symbol with ID and number equipment tag that is ID for Sensors.";
pbMechStatTag2.ToolTip = "Places number only equipment tag that is ID for Sensors.";
pbMechStatTagOff2.ToolTip = "Places offset Sensor symbol with number only equipment tag that is ID for Sensors.";
pbMechSpinStat.ToolTip = "Toggles Horizontal/Vertical parameter value.";
pbMechTogSym.ToolTip = "Toggles Sensor symbol visibility.";
string lDescMechStatUnit =
"First pick is the Sensor location."
+ "\nSecond pick selects the mechanical equipment the Sensor is client to."
+ "\nThird pick selects the mechanical equipment Sensor ID text location at the Sensor. This is a Tag on the mechanical equipment.";
string lDescMechStatUnitOff =
"Places a Sensor for mechanical equipment in four picks."
+ "\nFirst pick is the Sensor location. Ignore the symbol. It will be turned off later."
+ "\nSecond pick is for the offset Sensor tag symbol location."
+ "\nThird pick selects the mechanical equipment the Sensor is client to."
+ "\nLast pick selects the mechanical equipment Sensor ID text location at the Sensor. This is a Tag on the mechanical equipment.";
string lDescMechStatTag =
"First pick is the mechanical equipment the Sensor is client to."
+ "\nLast pick selects the mechanical equipment Sensor ID text location at the Sensor. This is a Tag on the mechanical equipment.";
string lDescMechStatTagOff = "First pick is the Sensor to change."
+ "\nSecond pick is for the Sensor offset symbol location."
+ "\nIf needed, third pick selects the mechanical equipment the Sensor is client to. Otherwise press Esc to exit."
+ "\nLast pick selects the mechanical equipment Sensor ID text location at the Sensor. This is a Tag on the mechanical equipment.";
pbMechStatUnit1.LongDescription = lDescMechStatUnit;
pbMechStatUnitOff1.LongDescription = lDescMechStatUnitOff;
pbMechStatUnit2.LongDescription = lDescMechStatUnit;
pbMechStatUnitOff2.LongDescription = lDescMechStatUnitOff;
pbMechStatTag1.LongDescription = lDescMechStatTag;
pbMechStatTagOff1.LongDescription = lDescMechStatTagOff;
pbMechStatTag2.LongDescription = lDescMechStatTag;
pbMechStatTagOff2.LongDescription = lDescMechStatTagOff;
//String thisPanelGenScripName = "GenScrip";
//RibbonPanel thisPanelGenScrip = a.CreateRibbonPanel(thisNewTabName, thisPanelGenScripName);
//ComboBoxData CB1Data = new ComboBoxData("11111");
//ComboBoxData CB2Data = new ComboBoxData("22222");
//IList<RibbonItem> cnt1Stacked = thisPanelGenScrip.AddStackedItems(CB1Data, CB2Data);
//Autodesk.Revit.UI.ComboBox combo1 = cnt1Stacked[0] as Autodesk.Revit.UI.ComboBox;
//Autodesk.Revit.UI.ComboBox combo2 = cnt1Stacked[1] as Autodesk.Revit.UI.ComboBox;
//ComboBoxMemberData SDD11 = new ComboBoxMemberData("CB1_01", "Item for CB1_01 item(SDD11)");
//ComboBoxMemberData SDD12 = new ComboBoxMemberData("CB1_02", "Item for CB1_02 item(SDD1)");
//ComboBoxMember cb1Mem11 = combo1.AddItem(SDD11);
//ComboBoxMember cb1Mem12 = combo1.AddItem(SDD12);
//ComboBoxMemberData SDD21 = new ComboBoxMemberData("CB2_01", "Item for CB2_01 item(SDD21)");
//ComboBoxMemberData SDD22 = new ComboBoxMemberData("CB2_02", "Item for CB2_02 item(SDD22)");
//ComboBoxMember cb1Mem21 = combo2.AddItem(SDD21);
//ComboBoxMember cb1Mem22 = combo2.AddItem(SDD22);
//combo1.CurrentChanged +=
// new EventHandler<Autodesk.Revit.UI.Events.ComboBoxCurrentChangedEventArgs>(ProcessComboChange);
//combo2.CurrentChanged +=
// new EventHandler<Autodesk.Revit.UI.Events.ComboBoxCurrentChangedEventArgs>(ProcessComboChange);
// add to ribbon panelA
// List<RibbonItem> projectButtonsBe = new List<RibbonItem>();
// projectButtonsBe.AddRange(thisRibbonPanelBe.AddStackedItems(pbBeMechHVAC));
thisRibbonPanelBe.AddItem(pbBeMechHVAC);
// assemble split buttons and add to ribbon
sb_MU = thisRibbonPanelSensor.AddItem(sbMSU) as SplitButton;
sb_MU.AddPushButton(pbMechStatUnit1);
sb_MU.AddPushButton(pbMechStatUnit2);
sb_MU.AddPushButton(pbMechStatUnitSet1);
sb_MU.AddPushButton(pbMechStatUnitSet2);
sb_MUO = thisRibbonPanelSensor.AddItem(sbMSUO) as SplitButton;
sb_MUO.AddPushButton(pbMechStatUnitOff1);
sb_MUO.AddPushButton(pbMechStatUnitOff2);
sb_MUO.AddPushButton(pbMechStatUnitOffSet1);
sb_MUO.AddPushButton(pbMechStatUnitOffSet2);
thisRibbonPanelSensor.AddSeparator();
// assemble split buttons and add to ribbon
SplitButton sbT = thisRibbonPanelSensor.AddItem(sbSTagReg) as SplitButton;
sbT.AddPushButton(pbMechStatTag1);
sbT.AddPushButton(pbMechStatTag2);
SplitButton sbOffT = thisRibbonPanelSensor.AddItem(sbSTagOff) as SplitButton;
sbOffT.AddPushButton(pbMechStatTagOff1);
sbOffT.AddPushButton(pbMechStatTagOff2);
thisRibbonPanelSensor.AddSeparator();
List <RibbonItem> ribbonItems = new List <RibbonItem>();
ribbonItems.AddRange(thisRibbonPanelSensor.AddStackedItems(pbMechSpinStat, pbMechTogSym));
thisRibbonPanelBe.AddSlideOut();
PushButtonData bInfo = new PushButtonData("Info", "Info", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdOpenDocFolder");
bInfo.ToolTip = "See the help document regarding this.";
bInfo.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".InfoLg.png");
thisRibbonPanelBe.AddItem(bInfo);
thisRibbonPanelSensor.AddSlideOut();
thisRibbonPanelSensor.AddItem(bInfo);
} // AddMech_WTA_MECH_Ribbon
public void AddTCOMDrops_WTA_TCOM_Ribbon(UIControlledApplication a)
{
string ExecutingAssemblyPath = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ExecutingAssemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
// create ribbon tab
String thisNewTabName = "WTA-TCOM";
try {
a.CreateRibbonTab(thisNewTabName);
} catch (Autodesk.Revit.Exceptions.ArgumentException) {
// Assume error generated is due to "WTA" already existing
}
// Create a push button in the ribbon panel
//PushButtonData pbData = new PushButtonData("QVis", " QVis ", ExecutingAssemblyPath, ExecutingAssemblyName + ".QVisCommand");
// Add new ribbon panel.
String thisNewPanelName = "TCOM Drops";
RibbonPanel thisNewRibbonPanelTCOM = a.CreateRibbonPanel(thisNewTabName, thisNewPanelName);
// add button to ribbon panel
//PushButton pushButton = thisNewRibbonPanel.AddItem(pbData) as PushButton;
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
//pushButton.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".QVis.png");
// provide button tips
//pushButton.ToolTip = "Floats a form with buttons to toggle visibilities.";
//pushButton.LongDescription = "On this form, the way the buttons look indicate the current visibility status.";
// Create push button in this ribbon panel
PushButtonData pbData2DH = new PushButtonData("2D H", "2D H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop2DHInstance");
PushButtonData pbData4DH = new PushButtonData("4D H", "4D H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop4DHInstance");
PushButtonData pbDataAPH = new PushButtonData("AP H", "AP H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDropAPHInstance");
PushButtonData pbData2DN = new PushButtonData(" 2D F ", " 2D F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop2DNHInstance");
PushButtonData pbData4DN = new PushButtonData(" 4D F ", " 4D F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop4DNHInstance");
PushButtonData pbDataAPN = new PushButtonData(" AP F ", " AP F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDropAPNHInstance");
PushButtonData pbData2PTTAG = new PushButtonData(" 2PT\nTag ", " 2PT\nTag ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickTag");
PushButtonData pbDataMtchTAG = new PushButtonData(" Match\nTag ", " Match\nTag ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdMatchParamterForTCOMDropTag");
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
pbData2PTTAG.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop.png");
pbDataMtchTAG.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".MtchTagDrop.png");
pbData2DN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop2Dsmall.png");
pbData2DH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop2Dsmall.png");
pbData4DN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop4Dsmall.png");
pbData4DH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop4Dsmall.png");
pbDataAPN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDropAPsmall.png");
pbDataAPH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDropAPsmall.png");
// add button tips (when data, must be defined prior to adding button.)
pbData2DH.ToolTip = "2D Hosted Drop";
pbData4DH.ToolTip = "4D Hosted Drop";
pbDataAPH.ToolTip = "AP Hosted Drop";
pbData2DN.ToolTip = "2D Non Hosted (Free) Drop";
pbData4DN.ToolTip = "4D Non Hosted (Free) Drop";
pbDataAPN.ToolTip = "AP Non Hosted (Free) Drop";
pbData2PTTAG.ToolTip = "Tag a drop with two picks.";
pbDataMtchTAG.ToolTip = "Match one tag value to another.";
string lDesc = " => Places a drop of the INSTANCE value indicated and then prompts for the TAG location.\n\n\u00A7Workset will be TCOM.";
string lDesc2PTTAG = " => Tags an existing drop with two picks.\nFirst pick selects drop.\nSecond pick is tag location.\nPress ESC to exit the command.";
string lDescMtchTAG = " => Matches the drop instance tag value by first picking the example tag and then picking the target drop instances.\nPress ESC to exit the command.";
pbData2DH.LongDescription = pbData2DH.ToolTip + lDesc;
pbData4DH.LongDescription = pbData4DH.ToolTip + lDesc;
pbDataAPH.LongDescription = pbDataAPH.ToolTip + lDesc;
pbData2DN.LongDescription = pbData2DN.ToolTip + lDesc;
pbData4DN.LongDescription = pbData4DN.ToolTip + lDesc;
pbDataAPN.LongDescription = pbDataAPN.ToolTip + lDesc;
pbData2PTTAG.LongDescription = lDesc2PTTAG;
pbDataMtchTAG.LongDescription = lDescMtchTAG;
// add button to ribbon panel
thisNewRibbonPanelTCOM.AddItem(pbData2PTTAG);
List <RibbonItem> projectButtons = new List <RibbonItem>();
projectButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(pbData2DH, pbData4DH, pbDataAPH));
projectButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(pbData2DN, pbData4DN, pbDataAPN));
thisNewRibbonPanelTCOM.AddItem(pbDataMtchTAG);
/// Once there is a slideout, all new items go in it.
/// It is not possbile to get back to the panel panel.
thisNewRibbonPanelTCOM.AddSlideOut();
#region TCOM Info
PushButtonData bInfoTCOM = new PushButtonData("Info", "Info", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdOpenDocFolder");
bInfoTCOM.ToolTip = "See the TCOM help document.";
bInfoTCOM.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".InfoSm.png");
#endregion
#region pbTCOMSettings
PushButtonData pbTCOMSettings = new PushButtonData("TCOMSet", "TCOM Settings", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTCOMSettings");
pbTCOMSettings.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".WTATabs.png");
pbTCOMSettings.ToolTip = "Set TCOM Settings - like Tags in the companion view.";
#endregion
List <RibbonItem> slideOutPanelButtons = new List <RibbonItem>();
slideOutPanelButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(bInfoTCOM, pbTCOMSettings));
} // AddTCOMDrops_WTA-TCOM_Ribbon
internal static Result Start(RibbonHandler ribbon)
{
var result = Result.Failed;
var button = RestoreButton(CommandName);
switch (result = Revit.OnStartup(Revit.ApplicationUI))
{
case Result.Succeeded:
// Update Rhino button Tooltip
button.ToolTip = $"Restores previously visible Rhino windows on top of Revit window";
button.LongDescription = $"Use CTRL key to open a Rhino model";
// hide the button title
if (button.GetAdwndRibbonButton() is Autodesk.Windows.RibbonButton adwndRadioButton)
{
adwndRadioButton.ShowText = false;
}
var assemblies = AppDomain.CurrentDomain.GetAssemblies();
// Register UI on Revit
if (assemblies.Any(x => x.GetName().Name == "RhinoCommon"))
{
rhinoPanel = ribbon.CreateAddinPanel(Addin.RhinoVersionInfo?.ProductName ?? "Rhinoceros");
CommandRhino.CreateUI(rhinoPanel);
CommandImport.CreateUI(rhinoPanel);
CommandToggleRhinoPreview.CreateUI(rhinoPanel);
CommandPython.CreateUI(rhinoPanel);
CommandRhinoOptions.CreateUI(rhinoPanel);
}
if (assemblies.Any(x => x.GetName().Name == "Grasshopper"))
{
grasshopperPanel = ribbon.CreateAddinPanel("Grasshopper");
CommandGrasshopper.CreateUI(grasshopperPanel);
CommandGrasshopperPreview.CreateUI(grasshopperPanel);
CommandGrasshopperSolver.CreateUI(grasshopperPanel);
CommandGrasshopperRecompute.CreateUI(grasshopperPanel);
CommandGrasshopperBake.CreateUI(grasshopperPanel);
grasshopperPanel.AddSeparator();
CommandGrasshopperPlayer.CreateUI(grasshopperPanel);
grasshopperPanel.AddSlideOut();
CommandGrasshopperPackageManager.CreateUI(grasshopperPanel);
CommandGrasshopperFolders.CreateUI(grasshopperPanel);
// Script Packages UI
UpdateScriptPkgUI(ribbon);
// setup listeners, and in either case, update the packages ui
// listed for changes in installed packages
CommandGrasshopperPackageManager.CommandCompleted += CommandGrasshopperPackageManager_CommandCompleted;
// listen for changes to user-script paths in options
AddinOptions.ScriptLocationsChanged += AddinOptions_ScriptLocationsChanged;
}
UpdateRibbonCompact();
result = Result.Succeeded;
break;
case Result.Cancelled:
button.Enabled = false;
if (Addin.CurrentStatus == Addin.Status.Unavailable)
{
button.ToolTip = "Rhino.Inside failed to found a valid copy of Rhino 7 WIP installed.";
}
else if (Addin.CurrentStatus == Addin.Status.Obsolete)
{
button.ToolTip = "Rhino.Inside has expired.";
}
else
{
button.ToolTip = "Rhino.Inside load was cancelled.";
}
button.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, @"https://www.rhino3d.com/inside/revit"));
break;
case Result.Failed:
button.Enabled = false;
button.ToolTip = "Rhino.Inside failed to load.";
return(Result.Failed);
}
return(result);
}