/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
// Define i/o parameters
var run = false;
// Read inputs
if (!DA.GetData(0, ref run))
{
return;
}
if (run == true)
{
///internal params
const ObjectType filter = ObjectType.Mesh;
/// select all meshes in doc
RhinoGet.GetMultipleObjects("", true, filter, out ObjRef[] objref);
/// access their materials
///
for (int i = 0; i < objref.Length; i++)
{
var rhino_object = objref[i].Object();
string new_object_name = rhino_object.GetMaterial(true).ToString();
/// set their names
///
Name = new_object_name;
rhino_object.CommitChanges();
}
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var result = RhinoGet.GetMultipleObjects("Select faces", false, Rhino.DocObjects.ObjectType.Surface, out var rhObjects);
if (result != Result.Success)
{
return(result);
}
var dialog = new ExportSettingsDialog();
if (dialog.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(Result.Cancel);
}
foreach (var rhObject in rhObjects)
{
var geometry = GetGeometry(rhObject.Geometry());
if (geometry == null)
{
continue;
}
dialog.SaveData(geometry);
}
return(Result.Success);
}
/// <summary>
/// launch rhino get object command
/// </summary>
/// <param name="parent">parent form that started the command</param>
/// <param name="ot">selection object type</param>
/// <returns>array of ObjRef</returns>
private ObjRef[] PickObj(ObjectType ot = ObjectType.AnyObject)
{
WindowState = FormWindowState.Minimized;
//ObjRef[] picked = await Task.Run(() =>
//{
// Result r = RhinoGet.GetMultipleObjects(" select object(s)", true, ot, out ObjRef[] objs);
// if (r == Result.Success)
// return objs;
// else return new ObjRef[] { };
//});
//parent.TopMost = true;
//parent.BringToFront();
//return picked;
Result r = RhinoGet.GetMultipleObjects(" select object(s)", true, ot, out ObjRef[] picked);
if (r == Result.Success)
{
WindowState = FormWindowState.Normal;
return(picked);
}
else
{
RhinoApp.WriteLine(" nothing selected...");
WindowState = FormWindowState.Normal;
return(new ObjRef[] { });
}
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
const Rhino.DocObjects.ObjectType selFilter = Rhino.DocObjects.ObjectType.Point;
Rhino.DocObjects.ObjRef[] pointObjRefs;
Result getPointsResults = RhinoGet.GetMultipleObjects("Select circuit component endpoints",
false, selFilter, out pointObjRefs);
if (getPointsResults == Result.Success)
{
RhinoList <Point> circuitPoints = new RhinoList <Point>();
foreach (Rhino.DocObjects.ObjRef objRef in pointObjRefs)
{
circuitPoints.Add(objRef.Point());
}
RhinoList <Line> conduitLines = autoroute(circuitPoints);
foreach (Line conduitLine in conduitLines)
{
doc.Objects.AddLine(conduitLine);
}
doc.Views.Redraw();
return(Result.Success);
}
return(Result.Failure);
}
public static Result ExtendCurve(RhinoDoc doc)
{
ObjRef[] boundary_obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select boundary objects", false, ObjectType.AnyObject, out boundary_obj_refs);
if (rc != Result.Success)
{
return(rc);
}
if (boundary_obj_refs == null || boundary_obj_refs.Length == 0)
{
return(Result.Nothing);
}
var gc = new GetObject();
gc.SetCommandPrompt("Select curve to extend");
gc.GeometryFilter = ObjectType.Curve;
gc.GeometryAttributeFilter = GeometryAttributeFilter.OpenCurve;
gc.DisablePreSelect();
gc.Get();
if (gc.CommandResult() != Result.Success)
{
return(gc.CommandResult());
}
var curve_obj_ref = gc.Object(0);
var curve = curve_obj_ref.Curve();
if (curve == null)
{
return(Result.Failure);
}
double t;
if (!curve.ClosestPoint(curve_obj_ref.SelectionPoint(), out t))
{
return(Result.Failure);
}
var curve_end = t <= curve.Domain.Mid ? CurveEnd.Start : CurveEnd.End;
var geometry = boundary_obj_refs.Select(obj => obj.Geometry());
var extended_curve = curve.Extend(curve_end, CurveExtensionStyle.Line, geometry);
if (extended_curve != null && extended_curve.IsValid)
{
if (!doc.Objects.Replace(curve_obj_ref.ObjectId, extended_curve))
{
return(Result.Failure);
}
doc.Views.Redraw();
}
else
{
RhinoApp.WriteLine("No boundary object was intersected so curve not extended");
return(Result.Nothing);
}
return(Result.Success);
}
public static Result ProjectPointsToMeshesEx(RhinoDoc doc)
{
ObjRef obj_ref;
var rc = RhinoGet.GetOneObject("mesh", false, ObjectType.Mesh, out obj_ref);
if (rc != Result.Success)
{
return(rc);
}
var mesh = obj_ref.Mesh();
ObjRef[] obj_ref_pts;
rc = RhinoGet.GetMultipleObjects("points", false, ObjectType.Point, out obj_ref_pts);
if (rc != Result.Success)
{
return(rc);
}
var points = new List <Point3d>();
foreach (var obj_ref_pt in obj_ref_pts)
{
var pt = obj_ref_pt.Point().Location;
points.Add(pt);
}
int[] indices;
var prj_points = Intersection.ProjectPointsToMeshesEx(new[] { mesh }, points, new Vector3d(0, 1, 0), 0, out indices);
foreach (var prj_pt in prj_points)
{
doc.Objects.AddPoint(prj_pt);
}
doc.Views.Redraw();
return(Result.Success);
}
public override void Setup() // this runs once in the beginning.
{
ObjectType.Curve;
RhinoGet.GetMultipleObjects("select rectangle", true, , crv);
for (int i = 0; i < crv.Length; i++)
{
crv[i].Z = 300;
}
}
//PickPoint 選點功能
public Result RunCommand(RhinoDoc doc)
{
ObjRef obj_ref;
var rc = RhinoGet.GetOneObject("Select point", false, ObjectType.Point, out obj_ref);
if (rc != Result.Success)
{
return(rc);
}
//選擇單點
var point = obj_ref.Point();
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
//選擇多點
ObjRef[] obj_refs;
rc = RhinoGet.GetMultipleObjects("Select point", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
//欄位名稱
TxtRes.Text = "BC,UR1,UR2,UR3\n";
int i = 0;
//清空
CbPointX.Items.Clear();
CbPointY.Items.Clear();
CbPointZ.Items.Clear();
foreach (var o_ref in obj_refs)
{
point = o_ref.Point();
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
i++;
//迭代
TxtRes.Text += TxtInputBC.Text + i + "," +
point.Location.X + "," +
point.Location.Y + "," +
point.Location.Z + ",\n";
CbPointX.Items.Add(point.Location.X);
CbPointY.Items.Add(point.Location.Y);
CbPointZ.Items.Add(point.Location.Z);
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//GET DATA FROM THE USER
//Select multiple points
ObjRef[] obj_refs;
List <Point3d> finalPts = new List <Point3d>();
var rc = RhinoGet.GetMultipleObjects("Select point", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
foreach (var o_ref in obj_refs)
{
var point = o_ref.Point();
finalPts.Add(point.Location);
}
doc.Objects.UnselectAll();
int depth = 0;
var rc1 = RhinoGet.GetInteger("The Depth of the Snowflake?", false, ref depth, 0, 5);
if (rc1 != Result.Success)
{
return(rc1);
}
double radius = 10;
var rc2 = RhinoGet.GetNumber("The size of the Snowflake?", false, ref radius);
if (rc2 != Result.Success)
{
return(rc2);
}
//CREATE SNOWFLAKES FOR EACH SELECTED POINT AND DEPTH AND RADIUS
foreach (Point3d pt in finalPts)
{
//STEP 1 - Create the initial triangle (just a list of 3 points)
List <Point3d> triangle = GenerateSnowflakeTriangle(pt, radius);
//STEP 2 - FROM TRIANGLE TO SNOWFLAKE
List <Point3d> snowflake = GenerateSnowflake(triangle, depth, doc);
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var filter = ObjectType.Curve;
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select objects to offset", false, filter, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
return(Result.Nothing);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
TablDockPanel tablpanel = Panels.GetPanel <TablDockPanel>(RhinoDoc.ActiveDoc);
bool blitz = false;
var r = RhinoGet.GetBool(" Erase existing Tabl_ contents?", false, "No", "Yes", ref blitz);
if (r == Result.Success)
{
r = RhinoGet.GetMultipleObjects(" Select objects to add", true, ObjectType.AnyObject, out ObjRef[] picked);
if (r == Result.Success)
{
if (blitz)
{
tablpanel.Loaded = picked.Select(oref => new ObjRef(oref.ObjectId)).ToArray();
tablpanel.PushRefs();
}
else
{
List <ObjRef> concat = new List <ObjRef>();
concat.AddRange(tablpanel.Loaded);
var ids = tablpanel.Loaded.Select(i => i.ObjectId.ToString());
foreach (ObjRef oref in picked)
{
if (!ids.Contains(oref.ObjectId.ToString()))
{
concat.Add(new ObjRef(oref.ObjectId));
}
}
tablpanel.Loaded = concat.ToArray();
tablpanel.PushRefs();
}
tablpanel.Refresh_Click(null, null); // dummy args, method doesn't use them anyway
if (!Panels.IsPanelVisible(TablDockPanel.PanelId))
{
MessageBox.Show("Added to Tabl_\nType \"LaunchTabl_\" to open it", "Success", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
}
else
{
RhinoApp.WriteLine("command interrupted, nothing done...");
}
}
else
{
RhinoApp.WriteLine("command interrupted, nothing done...");
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var analysis_mode = VisualAnalysisMode.Find(typeof(SampleCsZAnalysisMode));
if (null == analysis_mode)
{
analysis_mode = VisualAnalysisMode.Register(typeof(SampleCsZAnalysisMode));
}
if (null == analysis_mode)
{
RhinoApp.WriteLine("Unable to register Z-Analysis mode.");
return(Result.Failure);
}
const ObjectType filter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
var rc = RhinoGet.GetMultipleObjects("Select objects for Z analysis", false, filter, out var obj_refs);
if (rc != Result.Success)
{
return(rc);
}
var count = 0;
foreach (var obj_ref in obj_refs)
{
var obj = obj_ref.Object();
// see if this object is already in Z-Analysis mode
if (obj.InVisualAnalysisMode(analysis_mode))
{
continue;
}
if (obj.EnableVisualAnalysisMode(analysis_mode, true))
{
count++;
}
}
doc.Views.Redraw();
RhinoApp.WriteLine("{0} object(s) set into Z-Analysis mode.", count);
return(Result.Success);
}
public Result RunCommand(RhinoDoc doc)
{
//選擇多點
var rc = RhinoGet.GetMultipleObjects("Select point", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
foreach (var o_ref in obj_refs)
{
point = o_ref.Point();
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select hatches to replace", false, ObjectType.Hatch, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
var gs = new GetString();
gs.SetCommandPrompt("Name of replacement hatch pattern");
gs.AcceptNothing(false);
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
var hatch_name = gs.StringResult();
var pattern_index = doc.HatchPatterns.Find(hatch_name, true);
if (pattern_index < 0)
{
RhinoApp.WriteLine("The hatch pattern \"{0}\" not found in the document.", hatch_name);
return(Result.Nothing);
}
foreach (var obj_ref in obj_refs)
{
var hatch_object = obj_ref.Object() as HatchObject;
if (hatch_object.HatchGeometry.PatternIndex != pattern_index)
{
hatch_object.HatchGeometry.PatternIndex = pattern_index;
hatch_object.CommitChanges();
}
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result ReverseCurve(RhinoDoc doc)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select curves to reverse", true, ObjectType.Curve, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
foreach (var obj_ref in obj_refs)
{
var curve_copy = obj_ref.Curve().DuplicateCurve();
if (curve_copy != null)
{
curve_copy.Reverse();
doc.Objects.Replace(obj_ref, curve_copy);
}
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select points to move", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var xform = Transform.Translation(end_point - start_point);
foreach (var obj_ref in obj_refs)
{
doc.Objects.Transform(obj_ref, xform, true);
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result GetFloors(RhinoDoc rhinoDocument)
{
ObjRef[] objRefArray;
Result multipleObjects = RhinoGet.GetMultipleObjects("Please select surfaces", false, (ObjectType)2097160, out objRefArray);
if (multipleObjects != null)
{
return(multipleObjects);
}
if (objRefArray == null || objRefArray.Length < 1)
{
return((Result)3);
}
string str = "#VR User Defined Floors";
int num = rhinoDocument.Layers.Find(str, true);
if (num < 0)
{
LayerTable layers = rhinoDocument.Layers;
num = layers.Add(str, Color.Black);
if (num < 0)
{
RhinoApp.WriteLine("Unable to add <{0}> layer.", (object)str);
return((Result)3);
}
Layer layer = layers[num];
layer.Color = (Color.Blue);
layer.CommitChanges();
}
for (int index = 0; index < objRefArray.Length; ++index)
{
RhinoObject rhinoObject = objRefArray[index].Object();
rhinoObject.Attributes.LayerIndex = num;
rhinoObject.CommitChanges();
}
rhinoDocument.Views.Redraw();
return((Result)0);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] objrefs;
var rc = RhinoGet.GetMultipleObjects("Select objects to group", false, ObjectType.AnyObject, out objrefs);
if (rc != Rhino.Commands.Result.Success)
{
return(rc);
}
if (objrefs == null || objrefs.Length < 1)
{
return(Result.Failure);
}
var guids = new List <Guid>(objrefs.Length);
guids.AddRange(objrefs.Select(objref => objref.ObjectId));
doc.Groups.Add(guids);
doc.Views.Redraw();
return(Result.Success);
}
public static Result MovePointObjectsNonUniform(RhinoDoc doc)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select points to move", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
foreach (var obj_ref in obj_refs)
{
var point3d = obj_ref.Point().Location;
// modify the point coordinates in some way ...
point3d.X++;
point3d.Y++;
point3d.Z++;
doc.Objects.Replace(obj_ref, point3d);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select points to move", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
foreach (var obj_ref in obj_refs)
{
var point3d = obj_ref.Point().Location;
// modify the point coordinates in some way ...
point3d.X++;
point3d.Y++;
point3d.Z++;
doc.Objects.Replace(obj_ref, point3d);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
var apartmentHousesPercetage = new double();
var population = new double();
ObjRef[] srcCurves;
RhinoGet.GetMultipleObjects("ClosedPolygones", false, ObjectType.Curve, out srcCurves);
RhinoGet.GetNumber("Insert population", false, ref population, 0, 1000000);
RhinoGet.GetNumber("Percent of population living in apartment houses", false, ref apartmentHousesPercetage, 0, 100000);
var dicts = new Dictionary <Guid, DataDto>();
for (var i = 0; i < srcCurves.Count(); i++)
{
var o = GetDto(srcCurves[i]);
dicts.Add(srcCurves[i].ObjectId, o);
}
var optimalLivingArea = GetOptimalLivingArea((int)Math.Round(population), (int)Math.Round(apartmentHousesPercetage));
var excistingLivingArea = GetExcistingLivingArea(dicts);
if (optimalLivingArea > 0 && excistingLivingArea > 0)
{
var overStockPercent = (excistingLivingArea - optimalLivingArea) * 100 / excistingLivingArea;
RhinoApp.WriteLine($"Overstock {overStockPercent} percent");
}
else
{
RhinoApp.WriteLine($"No info to calculate overstock percent");
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
RhinoApp.WriteLine("The {0} will construct JSON representation of your scene.", EnglishName);
Rhino.DocObjects.ObjRef[] objrefs;
Result rc = RhinoGet.GetMultipleObjects("Select your scene objects",
false, Rhino.DocObjects.ObjectType.AnyObject, out objrefs);
List <Element> allElements = new List <Element>();
if (objrefs?.Length > 0)
{
foreach (var obj in objrefs)
{
var material = obj.Object().GetMaterial(true);
var mesh = new va3c_Mesh();
Mesh finalMesh = new Mesh();
RCva3c.Material mat;
if (material != null)
{
mat = new va3c_MeshPhongMaterial().GeneratePhongMaterial(material.DiffuseColor, material.AmbientColor, material.EmissionColor, material.SpecularColor, material.Shine, 1 - material.Transparency);
}
else
{
mat = new va3c_MeshBasicMaterial().GenerateMaterial(System.Drawing.Color.White, 1);
}
switch (obj.Geometry().ObjectType)
{
case ObjectType.None:
break;
case ObjectType.Point:
break;
case ObjectType.PointSet:
break;
case ObjectType.Curve:
break;
case ObjectType.Surface:
var srf = obj.Surface();
var meshSrf = Mesh.CreateFromBrep(srf.ToBrep());
if (meshSrf?.Length > 0)
{
foreach (var m in meshSrf)
{
finalMesh.Append(m);
}
}
allElements.Add(mesh.GenerateMeshElement(finalMesh, mat, new List <string> {
ObjectType.Brep.ToString()
}, new List <string> {
ObjectType.Brep.ToString()
}));
break;
case ObjectType.Brep:
var brep = obj.Brep();
var meshBrep = Mesh.CreateFromBrep(brep);
if (meshBrep?.Length > 0)
{
foreach (var m in meshBrep)
{
finalMesh.Append(m);
}
}
allElements.Add(mesh.GenerateMeshElement(finalMesh, mat, new List <string> {
"objectId"
}, new List <string> {
obj.ObjectId.ToString()
}));
break;
case ObjectType.Mesh:
var msh = obj.Mesh();
allElements.Add(mesh.GenerateMeshElement(msh, mat, new List <string> {
"objectId"
}, new List <string> {
obj.ObjectId.ToString()
}));
break;
case ObjectType.Light:
break;
case ObjectType.Annotation:
break;
case ObjectType.InstanceDefinition:
break;
case ObjectType.InstanceReference:
break;
case ObjectType.TextDot:
break;
case ObjectType.Grip:
break;
case ObjectType.Detail:
break;
case ObjectType.Hatch:
break;
case ObjectType.MorphControl:
break;
case ObjectType.BrepLoop:
break;
case ObjectType.PolysrfFilter:
break;
case ObjectType.EdgeFilter:
break;
case ObjectType.PolyedgeFilter:
break;
case ObjectType.MeshVertex:
break;
case ObjectType.MeshEdge:
break;
case ObjectType.MeshFace:
break;
case ObjectType.Cage:
break;
case ObjectType.Phantom:
break;
case ObjectType.ClipPlane:
break;
case ObjectType.Extrusion:
var extruction = obj.Brep();
var meshExtruction = Mesh.CreateFromBrep(extruction);
if (meshExtruction?.Length > 0)
{
foreach (var m in meshExtruction)
{
finalMesh.Append(m);
}
}
allElements.Add(mesh.GenerateMeshElement(finalMesh, mat, new List <string> {
"objectId"
}, new List <string> {
obj.ObjectId.ToString()
}));
break;
case ObjectType.AnyObject:
break;
default:
break;
}
}
}
var scenecompiler = new va3c_SceneCompiler();
string resultatas = scenecompiler.GenerateSceneJson(allElements);
Filewriter writer = new Filewriter();
writer.SaveFileTo(new List <string> {
resultatas
});
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Select houses
ObjRef[] buildingRefs;
Result rc0 = Rhino.Input.RhinoGet.GetMultipleObjects("Select Buildings to be connected", true, ObjectType.Brep, out buildingRefs);
if (rc0 != Rhino.Commands.Result.Success)
{
return(rc0);
}
if (buildingRefs == null || buildingRefs.Length < 1)
{
return(Rhino.Commands.Result.Failure);
}
List <Rhino.Geometry.Brep> in_breps0 = new List <Rhino.Geometry.Brep>();
for (int i = 0; i < buildingRefs.Length; i++)
{
Rhino.Geometry.Brep brep = buildingRefs[i].Brep();
if (brep != null)
{
in_breps0.Add(brep);
}
}
doc.Objects.UnselectAll();
// Select 1 Thermal Plant
ObjRef[] plantRefs;
Result rc1 = RhinoGet.GetMultipleObjects("Select 1 Thermal Plant", true, ObjectType.Brep, out plantRefs);
if (rc1 != Result.Success)
{
return(rc1);
}
if (plantRefs == null || plantRefs.Length < 1)
{
return(Result.Failure);
}
List <Rhino.Geometry.Brep> in_breps1 = new List <Rhino.Geometry.Brep>();
for (int i = 0; i < plantRefs.Length; i++)
{
Rhino.Geometry.Brep brep = plantRefs[i].Brep();
if (brep != null)
{
in_breps1.Add(brep);
}
}
doc.Objects.UnselectAll();
RhinoApp.WriteLine("{0} buildings and {1} thermal plant added", in_breps0.Count, in_breps1.Count);
// Create lines between all buildings and thermal plant
List <double> XcoordinatesBuildings = new List <double>();
List <double> YcoordinatesBuildings = new List <double>();
for (int i = 0; i < in_breps0.Count; i++)
{
for (int j = 0; i < in_breps0.Count; i++)
{
VolumeMassProperties vmp0 = VolumeMassProperties.Compute(buildingRefs[i].Brep());
VolumeMassProperties vmp1 = VolumeMassProperties.Compute(plantRefs[j].Brep());
//XcoordinatesBuildings[i] = vmp0.Centroid.X;
//YcoordinatesBuildings[i] = vmp0.Centroid.Y;
Point3d pt_start = new Point3d(vmp0.Centroid.X, vmp0.Centroid.Y, 0);
Point3d pt_end = new Point3d(vmp1.Centroid.X, vmp1.Centroid.Y, 0);
Vector3d v = new Vector3d(pt_end - pt_start);
if (v.IsTiny(Rhino.RhinoMath.ZeroTolerance))
{
return(Rhino.Commands.Result.Nothing);
}
if (doc.Objects.AddLine(pt_start, pt_end) != Guid.Empty)
{
doc.Views.Redraw();
//return Rhino.Commands.Result.Success;
}
}
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] objRefsA;
// RhinoApp.WriteLine("Hi there!!");
var rc = RhinoGet.GetMultipleObjects("Select set of curves to Boolean (A)", false, ObjectType.Curve, out objRefsA);
if (rc != Result.Success)
{
return(rc);
}
var getB = new Rhino.Input.Custom.GetObject();
getB.AcceptNothing(false);
getB.GeometryFilter = ObjectType.Curve;
getB.SetCommandPrompt("Select second set of curves to Boolean (B)");
getB.DisablePreSelect(); //<-- disable pre-selection on second get object
var result = getB.GetMultiple(1, 0);
if (result != GetResult.Object)
{
return(rc);
}
// Convert curves to polylines. Perhaps this should have more control?
var curvesA = Polyline3D.ConvertCurvesToPolyline(objRefsA.Select(r => r.Curve()));
var curvesB = Polyline3D.ConvertCurvesToPolyline(getB.Objects().Select(r => r.Curve()));
if (_options == null)
{
_options = new PolylineBooleanOptions();
_options.Initialize(doc.ModelAbsoluteTolerance, mode.Equals(RunMode.Scripted));
_options.SetCommandPrompt("Select boolean type (click to toggle)");
_options.AcceptNothing(true);
}
_options.EnableTransparentCommands(true);
_options.SetOriginalCurves(curvesA, curvesB);
while (true)
{
var res = _options.Get();
RhinoApp.WriteLine(res.ToString());
if (res == GetResult.Point)
{
_options.ToggleBoolean();
}
if (res == GetResult.Cancel)
{
return(_options.CommandResult());
}
if (res == GetResult.Nothing)
{
break;
}
if (res == GetResult.Option)
{
// update the enum options
_options.UpdateOptions();
_options.CalculateBoolean();
}
}
// deleselect all.
doc.Objects.Select(doc.Objects.GetSelectedObjects(true, true).Select(obj => obj.Id), false);
// return the offset
var guids = _options.Results.Select(pl => doc.Objects.AddPolyline(pl));
doc.Objects.Select(guids);
return(Result.Success);
}
public static Result DivideCurveStraight(RhinoDoc doc)
{
// user input
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select curve to divide", false,
ObjectType.Curve | ObjectType.EdgeFilter, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
double distance_between_divisions = 5;
rc = RhinoGet.GetNumber("Distance between divisions", false,
ref distance_between_divisions, 1.0, Double.MaxValue);
if (rc != Result.Success)
{
return(rc);
}
// generate the points
var points = new List <Point3d>();
foreach (var obj_ref in obj_refs)
{
var curve = obj_ref.Curve();
if (curve == null)
{
return(Result.Failure);
}
var t0 = curve.Domain.Min;
points.Add(curve.PointAt(t0));
var sphere_center = curve.PointAt(t0);
var t = t0;
var rest_of_curve = curve;
while (true)
{
var sphere = new Sphere(sphere_center, distance_between_divisions);
Curve[] overlap_curves;
Point3d[] intersect_points;
var b = Intersection.CurveBrep(rest_of_curve, sphere.ToBrep(), 0.0,
out overlap_curves, out intersect_points);
if (!b || (overlap_curves.Length == 0 && intersect_points.Length == 0))
{
break;
}
double intersect_param;
Point3d intersect_point;
NextintersectParamAndPoint(overlap_curves, intersect_points, rest_of_curve,
out intersect_param, out intersect_point);
points.Add(intersect_point);
t = intersect_param;
sphere_center = intersect_point;
rest_of_curve = curve.Split(t)[1];
}
}
foreach (var point in points)
{
doc.Objects.AddPoint(point);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var ptPuffynessOption = new OptionToggle(m_PointPuffyness, "False", "True");
var ptOffsetOption = new OptionDouble(m_PuffynessOffset, 0.5, double.PositiveInfinity);
var ptBorderPuffynessOption = new OptionToggle(m_BorderPuffyness, "False", "True");
var borderOffsetOption = new OptionDouble(m_BorderOffset, 0.5, double.PositiveInfinity);
var go = new GetOption();
go.SetCommandPrompt("Get meshing properties");
go.AcceptNothing(true);
go.AcceptEnterWhenDone(true);
int ptPuffyOptionIndex = go.AddOptionToggle("PointPuffyness", ref ptPuffynessOption);
int offsetOptionIndex = go.AddOptionDouble("OffsetPtPuffy", ref ptOffsetOption);
int borderPuffyOptionIndex = go.AddOptionToggle("BorderPuffyness", ref ptBorderPuffynessOption);
int borderOffsetOptionIndex = go.AddOptionDouble("OffsetBorderPuffy", ref borderOffsetOption);
go.Get();
var result = go.Result();
while (result != GetResult.Nothing)
{
if (result == GetResult.Cancel)
{
return(Result.Cancel);
}
int optionIdx = go.OptionIndex();
if (optionIdx == ptPuffyOptionIndex)
{
m_PointPuffyness = ptPuffynessOption.CurrentValue;
}
else if (optionIdx == offsetOptionIndex)
{
m_PuffynessOffset = ptOffsetOption.CurrentValue;
}
else if (optionIdx == borderPuffyOptionIndex)
{
m_BorderPuffyness = ptBorderPuffynessOption.CurrentValue;
}
else if (optionIdx == borderOffsetOptionIndex)
{
m_BorderOffset = borderOffsetOption.CurrentValue;
}
result = go.Get();
}
ObjRef[] rhObjects;
var res = RhinoGet.GetMultipleObjects("Select planar curves and Weight points", false, Rhino.DocObjects.ObjectType.Curve | Rhino.DocObjects.ObjectType.Point, out rhObjects);
if (res == Result.Success)
{
// 1. subdive in sets: Closed curves, Opened Curves, weight points;
List <Curve> closed_crvs = new List <Curve>();
List <Curve> opened_crvs = new List <Curve>();
List <Point> weight_points = new List <Point>();
bool puffyness = m_PointPuffyness;
double offset = m_PuffynessOffset;
bool border_puffyness = m_BorderPuffyness;
double border_offset = m_BorderOffset;
foreach (var ref_obj in rhObjects)
{
RhinoObject obj = ref_obj.Object();
if (obj.Geometry is Curve)
{
var crv = obj.Geometry as Curve;
if (crv.IsPlanar())
{
if (crv.IsClosed)
{
closed_crvs.Add(crv);
}
else
{
opened_crvs.Add(crv);
}
}
}
else if (obj.Geometry is Point)
{
weight_points.Add(obj.Geometry as Point);
}
}
double space = 1;
// 2. Insert curves into mesh
AM_Region region = null;
Curve border_outer_crv = null;
Curve offset_outer_crv = null;
if (closed_crvs.Count > 0)
{
region = new AM_Region();
for (int i = 0; i < closed_crvs.Count; i++)
{
var crv = closed_crvs[i];
region.AddCurve(crv, space, false);
AreaMassProperties area = AreaMassProperties.Compute(crv, AM_Util.FLT_EPSILON);
if (area.Area > 0 && border_puffyness)
{
if (border_outer_crv == null)
{
border_outer_crv = crv;
}
var offset_Crvs = crv.Offset(Plane.WorldXY, -border_offset, AM_Util.FLT_EPSILON, CurveOffsetCornerStyle.None);
foreach (var c in offset_Crvs)
{
c.Reverse();
doc.Objects.AddCurve(c);
offset_outer_crv = c;
region.AddCurve(c, space, true);
}
}
}
}
else
{
// TODO
Debug.Assert(false);
return(Result.Failure);
}
for (int i = 0; i < weight_points.Count; i++)
{
var pt = weight_points[i];
region.AddWeigthPoint(pt, space / 2);
if (puffyness && offset > 0)
{
var circle = new ArcCurve(new Circle(pt.Location, offset));
var nurbs = circle.ToNurbsCurve();
region.AddCurve(nurbs, space / 2, true);
}
}
for (int i = 0; i < opened_crvs.Count; i++)
{
var crv = opened_crvs[i];
region.AddCurve(crv, space, false);
if (puffyness && offset > 0)
{
var n = Vector3d.CrossProduct(crv.TangentAtStart, Vector3d.ZAxis);
Curve[] offsetCrv = crv.Offset(crv.PointAtStart + offset * n, Vector3d.ZAxis, offset, AM_Util.FLT_EPSILON, CurveOffsetCornerStyle.Round);
foreach (var c in offsetCrv)
{
doc.Objects.AddCurve(c);
region.AddCurve(crv, space, false);
}
Curve[] offsetCrv2 = crv.Offset(crv.PointAtStart - offset * n, Vector3d.ZAxis, offset, AM_Util.FLT_EPSILON, CurveOffsetCornerStyle.Round);
foreach (var c in offsetCrv2)
{
doc.Objects.AddCurve(c);
region.AddCurve(crv, space, false);
}
}
}
// 3. Mesh della regione
if (region != null)
{
if (region.BuildMesh())
{
// Inserisce i punti del contorno
foreach (var loop in region.Loops)
{
for (int i = 0; i < loop.NumSegments; i++)
{
var points = loop.GetGeneratedPoints(i);
//if (points != null) {
// foreach (var p in points) {
// doc.Objects.AddPoint(new Point3d(p.X, p.Y, 0));
// }
//}
}
}
}
// Trasforma in Mesh di Rhino
var mesh = region.Mesh2D;
if (mesh != null)
{
Mesh rhino_mesh = new Mesh();
double t = 5;
for (int i = 0; i < mesh.ArrayVertexes.Count; i++)
{
mesh.ArrayVertexes[i].Z = t;
}
// PostProcessa il puffyness
if (puffyness)
{
for (int i = 0; i < region.ArrayInnerVertex.Count; i++)
{
var iv = region.ArrayInnerVertex[i];
if (iv.MeshVertex != null)
{
iv.MeshVertex.Z = (4 / 5d) * t;
}
// Ricerca i punti nell'intorno fino all'offset (molto grezza!)
for (int j = 0; j < mesh.ArrayVertexes.Count; j++)
{
var v = mesh.ArrayVertexes[j];
double d = (iv.MeshVertex.Coord - v.Coord).Length;
if (d < offset)
{
double r = d / offset;
AM_Util.EInterpolation interpolation = AM_Util.EInterpolation.Parabolic;
v.Z = AM_Util.Interpolation(interpolation, iv.MeshVertex.Z, t, r);
}
}
}
}
// Individua i punti all'interno della zona di transizione
List <int> transitionVts = new List <int>();
if (border_puffyness && border_offset > 0)
{
// Individua i vertici di partenza e utilizza u flag di lavoro
List <AM_Vertex> transitionStartVts = new List <AM_Vertex>();
for (int i = 0; i < mesh.ArrayVertexes.Count; i++)
{
var v = mesh.ArrayVertexes[i];
bool is_loop_vertex = (v.Flag & 0x1) > 0;
v.Flag &= ~0x02;
if (is_loop_vertex && BelongToBorder(v))
{
transitionStartVts.Add(v);
}
}
// Si usa 0x04 come flag di lavoro
for (int i = 0; i < mesh.ArrayWEdges.Count; i++)
{
var e = mesh.ArrayWEdges[i];
e.Edge().Flag &= ~0x04;
e.Edge().Symm().Flag &= ~0x04;
}
for (int i = 0; i < transitionStartVts.Count; i++)
{
var v = transitionStartVts[i];
AddTransitionVertexes(v, transitionVts);
}
if (offset_outer_crv != null)
{
foreach (var iv in transitionVts)
{
var v = mesh.ArrayVertexes[iv];
double par;
if (offset_outer_crv.ClosestPoint(AM_Util.To3d(v.Coord), out par, 2 * border_offset))
{
Point3d cp = offset_outer_crv.PointAt(par);
double r = ((cp - AM_Util.To3d(v.Coord)).Length) / border_offset;
double z = AM_Util.Interpolation(AM_Util.EInterpolation.Parabolic, 0.8 * t, t, 1 - r);
v.Z = z;
}
}
}
}
// Facce
int totVtx = mesh.ArrayVertexes.Count;
for (int iSide = 0; iSide < 2; iSide++)
{
for (int i = 0; i < mesh.ArrayVertexes.Count; i++)
{
var v = mesh.ArrayVertexes[i];
Point3d pt = v.Coord3d;
if (iSide == 1)
{
pt.Z = 0;
}
rhino_mesh.Vertices.Add(pt);
}
for (int i = 0; i < mesh.ArrayFaces.Count; i++)
{
var f = mesh.ArrayFaces[i];
int numEdges = f.NumEdges;
if (numEdges == 3)
{
int[] vtx = { f.Vertex(0).Index, f.Vertex(1).Index, f.Vertex(2).Index };
if (iSide == 1)
{
vtx = new int[] { f.Vertex(0).Index + totVtx, f.Vertex(2).Index + totVtx, f.Vertex(1).Index + totVtx };
}
rhino_mesh.Faces.AddFace(vtx[0], vtx[1], vtx[2]);
}
else if (numEdges == 4)
{
int[] vtx = { f.Vertex(0).Index, f.Vertex(1).Index, f.Vertex(2).Index, f.Vertex(3).Index };
if (iSide == 1)
{
vtx = new int[] { f.Vertex(0).Index + totVtx, f.Vertex(3).Index + totVtx, f.Vertex(2).Index + totVtx, f.Vertex(1).Index + totVtx };
}
rhino_mesh.Faces.AddFace(vtx[0], vtx[1], vtx[2], vtx[3]);
}
}
}
for (int iEdge = 0; iEdge < mesh.ArrayWEdges.Count; iEdge++)
{
var edge = mesh.ArrayWEdges[iEdge].Edge();
if (edge.CcwFace() == null || edge.CwFace() == null)
{
// E' uno spigolo di bordo
int[] vtx = { edge.Destination().Index, edge.Origin().Index,
edge.Origin().Index + totVtx, edge.Destination().Index + totVtx, };
rhino_mesh.Faces.AddFace(vtx[0], vtx[1], vtx[2], vtx[3]);
}
}
rhino_mesh.Normals.ComputeNormals();
rhino_mesh.Compact();
if (doc.Objects.AddMesh(rhino_mesh) != Guid.Empty)
{
doc.Views.Redraw();
return(Rhino.Commands.Result.Success);
}
}
}
return(Result.Success);
}
return(Result.Cancel);
}
public static Result PickPoint(RhinoDoc doc)
{
// this creates a point where the mouse is clicked.
var gp = new GetPoint();
gp.SetCommandPrompt("Click for new point");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var point3d = gp.Point();
doc.Objects.AddPoint(point3d);
doc.Views.Redraw();
// selects a point that already exists
ObjRef obj_ref;
var rc = RhinoGet.GetOneObject("Select point", false, ObjectType.Point, out obj_ref);
if (rc != Result.Success)
{
return(rc);
}
var point = obj_ref.Point();
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
doc.Objects.UnselectAll();
// selects multiple points that already exist
ObjRef[] obj_refs;
rc = RhinoGet.GetMultipleObjects("Select point", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
foreach (var o_ref in obj_refs)
{
point = o_ref.Point();
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
}
doc.Objects.UnselectAll();
// also selects a point that already exists.
// Used when RhinoGet doesn't provide enough control
var go = new GetObject();
go.SetCommandPrompt("Select point");
go.GeometryFilter = ObjectType.Point;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
foreach (var o_ref in go.Objects())
{
point = o_ref.Point();
if (point != null)
{
RhinoApp.WriteLine("Point: x:{0}, y:{1}, z:{2}",
point.Location.X,
point.Location.Y,
point.Location.Z);
}
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result ContourCurves(RhinoDoc doc)
{
var filter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select objects to contour", false, filter, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Contour plane base point");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var base_point = gp.Point();
gp.DrawLineFromPoint(base_point, true);
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
if (base_point.DistanceTo(end_point) < RhinoMath.ZeroTolerance)
{
return(Result.Nothing);
}
double distance = 1.0;
rc = RhinoGet.GetNumber("Distance between contours", false, ref distance);
if (rc != Result.Success)
{
return(rc);
}
var interval = Math.Abs(distance);
Curve[] curves = null;
foreach (var obj_ref in obj_refs)
{
var geometry = obj_ref.Geometry();
if (geometry == null)
{
return(Result.Failure);
}
if (geometry is Brep)
{
curves = Brep.CreateContourCurves(geometry as Brep, base_point, end_point, interval);
}
else
{
curves = Mesh.CreateContourCurves(geometry as Mesh, base_point, end_point, interval);
}
foreach (var curve in curves)
{
var curve_object_id = doc.Objects.AddCurve(curve);
doc.Objects.Select(curve_object_id);
}
}
if (curves != null)
{
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//First, collect all the breps to split
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select breps to split", false, ObjectType.Brep, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
// Get the final plane
Plane plane;
rc = RhinoGet.GetPlane(out plane);
if (rc != Result.Success)
{
return(rc);
}
//Iterate over all object references
foreach (var obj_ref in obj_refs)
{
var brep = obj_ref.Brep();
var bbox = brep.GetBoundingBox(false);
//Grow the boundingbox in all directions
//If the boundingbox is flat (zero volume or even zero area)
//then the CreateThroughBox method will fail.
var min_point = bbox.Min;
min_point.X -= 1.0;
min_point.Y -= 1.0;
min_point.Z -= 1.0;
bbox.Min = min_point;
var max_point = bbox.Max;
max_point.X += 1.0;
max_point.Y += 1.0;
max_point.Z += 1.0;
bbox.Max = max_point;
var plane_surface = PlaneSurface.CreateThroughBox(plane, bbox);
if (plane_surface == null)
{
//This is rare, it will most likely not happen unless either the plane or the boundingbox are invalid
RhinoApp.WriteLine("Cutting plane could not be constructed.");
}
else
{
var breps = brep.Split(plane_surface.ToBrep(), doc.ModelAbsoluteTolerance);
if (breps == null || breps.Length == 0)
{
RhinoApp.Write("Plane does not intersect brep (id:{0})", obj_ref.ObjectId);
continue;
}
foreach (var brep_piece in breps)
{
doc.Objects.AddBrep(brep_piece);
}
doc.Objects.AddSurface(plane_surface);
doc.Objects.Delete(obj_ref, false);
}
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// mimic the functionality of the contour command using a background threads
// The tricky parts to the contour command are that it dynamically adds
// sections as they are found
const ObjectType filter = ObjectType.Brep | ObjectType.Extrusion | ObjectType.Mesh;
ObjRef[] objrefs;
var rc = RhinoGet.GetMultipleObjects("Select objects for contours", false, filter, out objrefs);
if (rc != Result.Success)
{
return(rc);
}
if (objrefs == null || objrefs.Length < 1)
{
return(Result.Failure);
}
Point3d base_point;
rc = RhinoGet.GetPoint("Contour plane base point", false, out base_point);
if (rc != Result.Success)
{
return(rc);
}
var gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.DrawLineFromPoint(base_point, false);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
Point3d end_point = gp.Point();
double interval = 1;
rc = RhinoGet.GetNumber("Distance between contours", true, ref interval, 0.001, 10000);
if (rc != Result.Success)
{
return(rc);
}
// figure out the combined bounding box of all the selected geometry
BoundingBox bounds = BoundingBox.Unset;
var geometries = new List <GeometryBase>();
foreach (var objref in objrefs)
{
var geometry = objref.Geometry();
var extrusion = geometry as Extrusion;
if (extrusion != null)
{
geometry = objref.Brep();
}
geometries.Add(geometry);
var bbox = geometry.GetBoundingBox(false);
bounds.Union(bbox);
}
Vector3d normal = end_point - base_point;
normal.Unitize();
var curplane = new Plane(base_point, normal);
double min_t, max_t;
if (!curplane.DistanceTo(bounds, out min_t, out max_t))
{
return(Result.Failure);
}
min_t -= interval;
max_t += interval;
min_t = Math.Floor(min_t / interval);
max_t = Math.Ceiling(max_t / interval);
double tolerance = doc.ModelAbsoluteTolerance;
var tasks = new List <Task <Curve[]> >();
var gc = new Rhino.Input.Custom.GetCancel();
for (double t = min_t; t <= max_t; t += 1.0)
{
double offset = t * interval;
var point = base_point + normal * offset;
var plane = new Plane(point, normal);
foreach (var geom in geometries)
{
var geom1 = geom;
var task = Task.Run(() => Section(plane, geom1, tolerance), gc.Token);
tasks.Add(task);
}
}
gc.TaskCompleted += OnTaskCompleted;
rc = gc.WaitAll(tasks, doc);
return(rc);
}
