void CalMat(RhinoDoc doc, double spezWeight, Rhino.DocObjects.ObjectType objType, Rhino.DocObjects.ObjRef objref, List <string> matList, String[] matName, int pos, string g_ct)
{
if ((objType == Rhino.DocObjects.ObjectType.Surface | objType == Rhino.DocObjects.ObjectType.PolysrfFilter | objType == Rhino.DocObjects.ObjectType.Brep | objType == Rhino.DocObjects.ObjectType.Extrusion))
{
Brep objrefBrep = objref.Brep();
bool bc = objrefBrep.IsSolid;
if (bc == false)
{
open++;
}
double volObj = objrefBrep.GetVolume();
double weight = Math.Round(volObj * spezWeight, 3, MidpointRounding.AwayFromZero);
materials[pos] += weight;
//matList.Add(matName[pos] + " " + weight + g_ct);
}
else if (objType == Rhino.DocObjects.ObjectType.Mesh)
{
Mesh objrefMesh = objref.Mesh();
bool bc = objrefMesh.IsClosed;
if (bc == false)
{
open++;
}
double volObj = objrefMesh.Volume();
double weight = Math.Round(volObj * spezWeight, 3, MidpointRounding.AwayFromZero);
materials[pos] += weight;
//matList.Add(matName[pos] + " " + weight + g_ct);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// TODO: complete command.
RhinoApp.WriteLine("The {0} command is under construction.", EnglishName);
GetObject gbrep = new GetObject();
gbrep.SetCommandPrompt("get the brep");
gbrep.GeometryFilter = Rhino.DocObjects.ObjectType.Brep;
gbrep.SubObjectSelect = false;
gbrep.Get();
if (gbrep.CommandResult() != Rhino.Commands.Result.Success)
{
return(gbrep.CommandResult());
}
Rhino.DocObjects.ObjRef my_objref = gbrep.Object(0);
Rhino.DocObjects.RhinoObject my_obj = my_objref.Object();
if (my_obj == null)
{
return(Rhino.Commands.Result.Failure);
}
Brep brep = my_objref.Brep();
if (brep == null)
{
return(Result.Failure);
}
my_obj.Select(false);
RhinoApp.WriteLine("the name of the object is {0}", brep.UserDictionary.GetString("name"));
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Surface | Rhino.DocObjects.ObjectType.PolysrfFilter;
Rhino.DocObjects.ObjRef objref = null;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select surface or polysurface", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.DocObjects.RhinoObject rhobj = objref.Object();
Rhino.Geometry.Brep brep = objref.Brep();
if (rhobj == null || brep == null)
{
return(Rhino.Commands.Result.Failure);
}
rhobj.Select(false);
System.Collections.Generic.List <Rhino.Geometry.Curve> curves = new System.Collections.Generic.List <Rhino.Geometry.Curve>();
foreach (Rhino.Geometry.BrepEdge edge in brep.Edges)
{
// Find only the naked edges
if (edge.Valence == Rhino.Geometry.EdgeAdjacency.Naked)
{
Rhino.Geometry.Curve crv = edge.DuplicateCurve();
if (null != crv)
{
curves.Add(crv);
}
}
}
double tol = 2.1 * doc.ModelAbsoluteTolerance;
Rhino.Geometry.Curve[] output = Rhino.Geometry.Curve.JoinCurves(curves, tol);
for (int i = 0; i < output.Length; i++)
{
Guid id = doc.Objects.AddCurve(output[i]);
doc.Objects.Select(id);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
bool allBrepSolid = true;
const Rhino.DocObjects.ObjectType geometryFilter = Rhino.DocObjects.ObjectType.Brep | Rhino.DocObjects.ObjectType.Mesh;
GetObject wro = new Rhino.Input.Custom.GetObject();
wro.SetCommandPrompt("Select objects to weight.");
wro.GeometryFilter = geometryFilter;
wro.SubObjectSelect = true;
wro.DeselectAllBeforePostSelect = false;
wro.OneByOnePostSelect = true;
wro.GetMultiple(1, 0);
double volObj3 = 0;
for (int i = 0; i < wro.ObjectCount; i++)
{
Rhino.DocObjects.ObjRef objref = wro.Object(i);
// get selected surface object
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
// get selected surface (face)
Brep refcr = objref.Brep();
if (refcr != null)
{
var volObj = VolumeMassProperties.Compute(refcr);
double volObj2 = refcr.GetVolume();
volObj3 = volObj3 + volObj2;
bool brepSolid = refcr.IsSolid;
if (brepSolid == false)
{
allBrepSolid = false;
}
}
if (refcr == null)
{
Mesh refcm = objref.Mesh();
Brep refmb = Brep.CreateFromMesh(refcm, false);
var volOb = VolumeMassProperties.Compute(refmb);
double volObj4 = refmb.GetVolume();
volObj3 = volObj3 + volObj4;
bool brepSolid = refmb.IsSolid;
if (brepSolid == false)
{
allBrepSolid = false;
}
}
}
double gold18k = Math.Round(volObj3 * 0.0158, 2, MidpointRounding.AwayFromZero);
double gold14k = Math.Round(volObj3 * 0.0146, 2, MidpointRounding.AwayFromZero);
double platinum = Math.Round(volObj3 * 0.0214, 2, MidpointRounding.AwayFromZero);
double palladium = Math.Round(volObj3 * 0.012, 2, MidpointRounding.AwayFromZero);
double silver925 = Math.Round(volObj3 * 0.0102, 2, MidpointRounding.AwayFromZero);
double diaCt = Math.Round(volObj3 * 0.01755, 2, MidpointRounding.AwayFromZero);
if (allBrepSolid)
{
RhinoApp.WriteLine("The weight is: Gold 18k " + gold18k + "g, Gold 14k " + gold14k + "g, Platinum " + platinum + "g, Palladium " + palladium + "g, Silver 925 " + silver925 + "g, Diamond" + diaCt + "Ct");
}
else
{
RhinoApp.WriteLine("AT LEAST ONE OBJECT IS OPEN! Result might be false!" + "The weight is: Gold 18k " + gold18k + "g, Gold 14k " + gold14k + "g, Platinum " + platinum + "g, Palladium " + palladium + "g, Silver 925 " + silver925 + "g, Diamond" + diaCt + "Ct");
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Mesh meshSurf;
List <Guid> ids = new List <Guid>();
double tolerance = doc.ModelAbsoluteTolerance;
const Rhino.DocObjects.ObjectType geometryFilter = Rhino.DocObjects.ObjectType.Surface |
Rhino.DocObjects.ObjectType.PolysrfFilter |
Rhino.DocObjects.ObjectType.Mesh;
GetObject gs = new Rhino.Input.Custom.GetObject();
gs.SetCommandPrompt("Surface to orient on");
gs.GeometryFilter = geometryFilter;
gs.SubObjectSelect = true;
gs.DeselectAllBeforePostSelect = true;
gs.OneByOnePostSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
Rhino.DocObjects.ObjRef objref = gs.Object(0);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
brepSurf = objref.Brep();
if (brepSurf == null)
{
meshSurf = objref.Mesh();
brepSurf = Brep.CreateFromMesh(meshSurf, true);
}
if (brepSurf == null)
{
return(Result.Failure);
}
obj.Select(false);
while (true)
{
w_key_pressed = false;
s_key_pressed = false;
a_key_pressed = false;
d_key_pressed = false;
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
RhinoApp.KeyboardEvent += OnRhinoKeyboardEvent;
Point3d pt0;
GetPoint getPointAction = new GetPoint();
getPointAction.SetCommandPrompt("Please select insert point(s) on surface.");
getPointAction.Constrain(brepSurf, -1, -1, false);
var stoneDiam = new Rhino.Input.Custom.OptionDouble(diamStone);
var stoneOff = new Rhino.Input.Custom.OptionDouble(offSetStone);
var boolOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
var moveOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
getPointAction.AddOptionDouble("StoneDiam", ref stoneDiam);
getPointAction.AddOptionDouble("Offset", ref stoneOff);
getPointAction.AddOptionToggle("Delete", ref boolOption);
getPointAction.AddOptionToggle("Move", ref moveOption);
getPointAction.DynamicDraw += RefCircleDraw;
getPointAction.Tag = obj;
getPointAction.AcceptString(false);
getPointAction.AcceptNothing(true);
var res = getPointAction.Get();
if (w_key_pressed || s_key_pressed)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
w_key_pressed = false;
s_key_pressed = false;
stoneDiam.CurrentValue = diamStone;
}
if (a_key_pressed || d_key_pressed)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
a_key_pressed = false;
d_key_pressed = false;
stoneOff.CurrentValue = offSetStone;
}
if (res == GetResult.Nothing)
{
break;
}
if (m_escape_key_pressed)
{
break;
}
diamStone = stoneDiam.CurrentValue;
offSetStone = stoneOff.CurrentValue;
optionBool = boolOption.CurrentValue;
moveBool = moveOption.CurrentValue;
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
if (moveBool == true)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
while (true)
{
GetObject gcd = new Rhino.Input.Custom.GetObject();
gcd.SetCommandPrompt("Select circle(s) to move. Press enter when done");
gcd.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcd.SubObjectSelect = false;
gcd.DeselectAllBeforePostSelect = true;
gcd.AcceptNothing(true);
if (gcd.Get() == GetResult.Nothing)
{
break;
}
gcd.Get();
Rhino.DocObjects.ObjRef delobjref = gcd.Object(0);
Rhino.DocObjects.RhinoObject delobj = delobjref.Object();
Curve curveRadius = delobjref.Curve();
Circle circleRadius = new Circle();
curveRadius.TryGetCircle(out circleRadius, tolerance);
diamStone = circleRadius.Diameter;
doc.Objects.Delete(delobj, true);
doc.Views.Redraw();
getPointAction.Get();
pt0 = getPointAction.Point();
Point3d closestPoint;
ComponentIndex compIndex;
double u, v;
Vector3d vt1;
brepSurf.ClosestPoint(pt0, out closestPoint, out compIndex, out u, out v, 0.01, out vt1);
Plane pl1 = new Plane(pt0, vt1);
Circle cr1 = new Circle(pl1, pt0, diamStone / 2);
var crgu = doc.Objects.AddCircle(cr1);
ids.Add(crgu);
doc.Views.Redraw();
}
moveBool = false;
}
if (optionBool == true)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
while (true)
{
GetObject gcd = new Rhino.Input.Custom.GetObject();
gcd.SetCommandPrompt("Select circle(s) to delete. Press enter when done");
gcd.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcd.SubObjectSelect = false;
gcd.DeselectAllBeforePostSelect = true;
gcd.AcceptNothing(true);
if (gcd.Get() == GetResult.Nothing)
{
break;
}
gcd.Get();
Rhino.DocObjects.ObjRef delobjref = gcd.Object(0);
Rhino.DocObjects.RhinoObject delobj = delobjref.Object();
Curve curveRadius = delobjref.Curve();
Circle circleRadius = new Circle();
curveRadius.TryGetCircle(out circleRadius, tolerance);
diamStone = circleRadius.Diameter;
doc.Objects.Delete(delobj, true);
doc.Views.Redraw();
}
optionBool = false;
}
if (res == GetResult.Point)
{
pt0 = getPointAction.Point();
Point3d closestPoint;
ComponentIndex compIndex;
double u, v;
Vector3d vt1;
brepSurf.ClosestPoint(pt0, out closestPoint, out compIndex, out u, out v, 0.01, out vt1);
Plane pl1 = new Plane(pt0, vt1);
Circle cr1 = new Circle(pl1, pt0, diamStone / 2);
var crgu = doc.Objects.AddCircle(cr1);
ids.Add(crgu);
doc.Views.Redraw();
}
}
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Groups.Add(ids);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//pick surface to orient to or block instance to relocate
GetObject gs = new Rhino.Input.Custom.GetObject();
gs.SetCommandPrompt("Surface to orient new object on or BlockInstance to move");
gs.GeometryFilter = Rhino.DocObjects.ObjectType.Surface | Rhino.DocObjects.ObjectType.InstanceReference;
gs.SubObjectSelect = true;
gs.DeselectAllBeforePostSelect = false;
gs.OneByOnePostSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
Rhino.DocObjects.ObjRef objref = gs.Object(0);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
surface = objref.Surface();
//relocate block instance
if (surface == null)
{
Rhino.DocObjects.InstanceObject instance1 = objref.Object() as Rhino.DocObjects.InstanceObject;
instancePoint = instance1.InsertionPoint;
double g, h;
surface2.ClosestPoint(instancePoint, out g, out h);
var instanceDirection = surface2.NormalAt(g, h);
instancePlane = new Plane(instancePoint, instanceDirection);
Rhino.Input.Custom.GetPoint gpss = new Rhino.Input.Custom.GetPoint();
gpss.SetCommandPrompt("Point on surface to orient to");
gpss.Constrain(surface2, false);
gpss.DynamicDraw += RefObjDraw;
gpss.Tag = instance1;
gpss.Get();
if (gpss.CommandResult() != Rhino.Commands.Result.Success)
{
return(gpss.CommandResult());
}
Point3d ptss = gpss.Point();
surface2.ClosestPoint(ptss, out g, out h);
var direction1 = surface2.NormalAt(g, h);
Plane pl11 = new Plane(ptss, direction1);
Transform iform = Rhino.Geometry.Transform.PlaneToPlane(instancePlane, pl11);
doc.Objects.Transform(instance1, iform, true);
return(Result.Success);
}
obj.Select(false);
//pick objekt to orient
var copy = new Rhino.Input.Custom.OptionToggle(false, "No", "Yes");
GetObject go = new GetObject();
go.SetCommandPrompt("Select object to orient.");
go.AddOptionToggle("Copy", ref copy);
go.SubObjectSelect = true;
go.DeselectAllBeforePostSelect = false;
go.GroupSelect = true;
for (; ;)
{
var res = go.GetMultiple(1, -1);
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
if (res == GetResult.Option)
{
copyBol = copy.CurrentValue;
continue;
}
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
break;
}
int obCount = go.ObjectCount;
string instDefCount = DateTime.Now.ToString("ddMMyyyyHHmmss");
//create block instance and plane for instance
Rhino.Input.Custom.GetPoint gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("Point to orient from");
gp.Get();
if (gp.CommandResult() != Rhino.Commands.Result.Success)
{
return(gp.CommandResult());
}
Vector3d vt1 = new Vector3d(0, 0, 1);
Point3d pt1 = gp.Point();
sourcePlane = new Plane(pt1, vt1);
Plane originPlane = new Plane(Point3d.Origin, vt1);
Transform bform = Rhino.Geometry.Transform.PlaneToPlane(sourcePlane, originPlane);
//block instance
GeometryBase[] obj1List = new GeometryBase[obCount];
List <Brep> opList = new List <Brep>();
for (int igo = 0; igo < obCount; igo++)
{
Rhino.DocObjects.ObjRef objref1 = go.Object(igo);
Rhino.DocObjects.RhinoObject obj1 = objref1.Object();
if (obj == null)
{
return(Result.Failure);
}
obj.Select(false);
Rhino.Geometry.Brep opItem = objref1.Brep();
opList.Add(opItem);
GeometryBase obj1Base = obj1.Geometry;
obj1Base.Transform(bform);
obj1List[igo] = obj1Base;
}
var orientBlock = doc.InstanceDefinitions.Add("Block" + instDefCount, "OrientBlock", Point3d.Origin, obj1List);
//get all go.Objects to .Tag
Brep[] op = new Brep[obCount];
op = Brep.CreateBooleanUnion(opList, 0.01);
Brep od = new Brep();
od = op[0];
var odGuid = doc.Objects.AddBrep(od);
Rhino.DocObjects.ObjRef objref2 = new Rhino.DocObjects.ObjRef(odGuid);
Rhino.DocObjects.RhinoObject objDrw = objref2.Object();
//orient plane to surface
if (copyBol)
{
while (true)
{
Rhino.Input.Custom.GetPoint gps = new Rhino.Input.Custom.GetPoint();
gps.SetCommandPrompt("Point on surface to orient to. Press enter when done.");
gps.Constrain(surface, false);
gps.AcceptNothing(true);
gps.DynamicDraw += RefObjDraw;
gps.Tag = objDrw;
var res = gps.Get();
if (res == GetResult.Nothing)
{
break;
}
//else if (gps.CommandResult() != Rhino.Commands.Result.Success)
// return gps.CommandResult();
Point3d pts = gps.Point();
double u, v;
surface.ClosestPoint(pts, out u, out v);
Vector3d direction = surface.NormalAt(u, v);
Plane pl1 = new Plane(pts, direction);
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.PlaneToPlane(originPlane, pl1);
doc.Objects.AddInstanceObject(orientBlock, xform);
doc.Objects.Delete(objDrw);
}
copyBol = false;
}
else
{
Rhino.Input.Custom.GetPoint gps = new Rhino.Input.Custom.GetPoint();
gps.SetCommandPrompt("Point on surface to orient to");
gps.Constrain(surface, false);
gps.DynamicDraw += RefObjDraw;
gps.Tag = objDrw;
gps.Get();
if (gps.CommandResult() != Rhino.Commands.Result.Success)
{
return(gps.CommandResult());
}
Point3d pts = gps.Point();
double u, v;
surface.ClosestPoint(pts, out u, out v);
Vector3d direction = surface.NormalAt(u, v);
Plane pl1 = new Plane(pts, direction);
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.PlaneToPlane(originPlane, pl1);
doc.Objects.AddInstanceObject(orientBlock, xform);
doc.Objects.Delete(objDrw);
}
surface2 = surface;
return(Result.Success);
}
