public static void SlideToNewState(this RadioIconButton widget, RadioIconButton newActiveButton, OverflowBar parent, Action animationComplete, ThemeConfig theme)
{
double displayTime = 600;
double elapsedMs = 0;
var box = new GuiWidget()
{
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Absolute,
Position = widget.Position + new VectorMath.Vector2(widget.Margin.Width, widget.Margin.Height),
Size = widget.Size,
BackgroundColor = theme.AccentMimimalOverlay,
BackgroundRadius = theme.ButtonRadius,
BackgroundOutlineWidth = 1,
BorderColor = theme.PrimaryAccentColor
};
parent.AddChildDirect(box);
var startX = box.Position.X;
var startY = box.Position.Y;
var xdistance = (newActiveButton.Position.X + newActiveButton.Margin.Width) - startX;
var direction = xdistance > 0 ? 1 : -1;
var startedMS = UiThread.CurrentTimerMs;
var animation = new Animation()
{
DrawTarget = widget,
FramesPerSecond = 20,
};
animation.Update += (s1, updateEvent) =>
{
elapsedMs = UiThread.CurrentTimerMs - startedMS;
if (elapsedMs < (displayTime + 300))
{
var ratio = Math.Min(1, elapsedMs / displayTime);
double blend = Easing.Cubic.In(ratio);
box.Position = new VectorMath.Vector2(startX + (xdistance * blend), startY);
// Console.WriteLine("Ms: {0}, Ratio: {1}, Easing: {2}, Position: {3}", elapsedMs, ratio, blend, box.Position);
box.Invalidate();
}
else
{
animation.Stop();
animationComplete?.Invoke();
UiThread.RunOnIdle(box.Close, .3);
}
};
animation.Start();
}
public GCodeOptionsPanel(BedConfig sceneContext, PrinterConfig printer, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
gcodeOptions = sceneContext.RendererOptions;
var buttonPanel = new FlowLayoutWidget()
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit
};
var buttonGroup = new ObservableCollection <GuiWidget>();
speedsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("speeds.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Speeds Button",
Checked = gcodeOptions.GCodeLineColorStyle == "Speeds",
ToolTipText = "Show Speeds".Localize(),
Margin = theme.ButtonSpacing
};
speedsButton.Click += SwitchColorModes_Click;
buttonGroup.Add(speedsButton);
buttonPanel.AddChild(speedsButton);
materialsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("materials.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Materials Button",
Checked = gcodeOptions.GCodeLineColorStyle == "Materials",
ToolTipText = "Show Materials".Localize(),
Margin = theme.ButtonSpacing
};
materialsButton.Click += SwitchColorModes_Click;
buttonGroup.Add(materialsButton);
buttonPanel.AddChild(materialsButton);
noColorButton = new RadioIconButton(AggContext.StaticData.LoadIcon("no-color.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "No Color Button",
Checked = gcodeOptions.GCodeLineColorStyle == "None",
ToolTipText = "No Color".Localize(),
Margin = theme.ButtonSpacing
};
noColorButton.Click += SwitchColorModes_Click;
buttonGroup.Add(noColorButton);
buttonPanel.AddChild(noColorButton);
this.AddChild(
new SettingsItem(
"Color View".Localize(),
theme,
optionalControls: buttonPanel,
enforceGutter: false));
buttonPanel = new FlowLayoutWidget()
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit
};
// Reset to new button group
buttonGroup = new ObservableCollection <GuiWidget>();
solidButton = new RadioIconButton(AggContext.StaticData.LoadIcon("solid.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Solid Button",
Checked = gcodeOptions.GCodeModelView == "Semi-Transparent",
ToolTipText = "Show Semi-Transparent Model".Localize(),
Margin = theme.ButtonSpacing
};
solidButton.Click += SwitchModelModes_Click;
buttonGroup.Add(solidButton);
buttonPanel.AddChild(solidButton);
materialsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("wireframe.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Wireframe Button",
Checked = gcodeOptions.GCodeModelView == "Wireframe",
ToolTipText = "Show Wireframe Model".Localize(),
Margin = theme.ButtonSpacing
};
materialsButton.Click += SwitchModelModes_Click;
buttonGroup.Add(materialsButton);
buttonPanel.AddChild(materialsButton);
noColorButton = new RadioIconButton(AggContext.StaticData.LoadIcon("no-color.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "No Model Button",
Checked = gcodeOptions.GCodeModelView == "None",
ToolTipText = "No Model".Localize(),
Margin = theme.ButtonSpacing
};
noColorButton.Click += SwitchModelModes_Click;
buttonGroup.Add(noColorButton);
buttonPanel.AddChild(noColorButton);
this.AddChild(
new SettingsItem(
"Model View".Localize(),
buttonPanel,
theme,
enforceGutter: false));
gcodeOptions = sceneContext.RendererOptions;
var viewOptions = sceneContext.GetBaseViewOptions();
viewOptions.AddRange(new[]
{
new BoolOption(
"Moves".Localize(),
() => gcodeOptions.RenderMoves,
(value) => gcodeOptions.RenderMoves = value),
new BoolOption(
"Retractions".Localize(),
() => gcodeOptions.RenderRetractions,
(value) => gcodeOptions.RenderRetractions = value),
new BoolOption(
"Extrusion".Localize(),
() => gcodeOptions.SimulateExtrusion,
(value) => gcodeOptions.SimulateExtrusion = value),
new BoolOption(
"Transparent".Localize(),
() => gcodeOptions.TransparentExtrusion,
(value) => gcodeOptions.TransparentExtrusion = value),
new BoolOption(
"Hide Offsets".Localize(),
() => gcodeOptions.HideExtruderOffsets,
(value) => gcodeOptions.HideExtruderOffsets = value,
() => printer.Settings.GetValue <int>(SettingsKey.extruder_count) > 1),
new BoolOption(
"Sync To Print".Localize(),
() => gcodeOptions.SyncToPrint,
(value) =>
{
gcodeOptions.SyncToPrint = value;
if (!gcodeOptions.SyncToPrint)
{
// If we are turning off sync to print, set the slider to full.
//layerRenderRatioSlider.SecondValue = 1;
}
})
});
var optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
this.AddChild(optionsContainer);
void BuildMenu()
{
foreach (var option in viewOptions.Where(option => option.IsVisible()))
{
var settingsItem = new SettingsItem(
option.Title,
theme,
new SettingsItem.ToggleSwitchConfig()
{
Name = option.Title + " Toggle",
Checked = option.IsChecked(),
ToggleAction = option.SetValue
},
enforceGutter: false);
settingsItem.Padding = settingsItem.Padding.Clone(right: 8);
optionsContainer.AddChild(settingsItem);
}
}
BuildMenu();
PropertyChangedEventHandler syncProperties = (s, e) =>
{
if (e.PropertyName == nameof(gcodeOptions.RenderBed) ||
e.PropertyName == nameof(gcodeOptions.RenderBuildVolume))
{
optionsContainer.CloseAllChildren();
BuildMenu();
}
};
gcodeOptions.PropertyChanged += syncProperties;
optionsContainer.Closed += (s, e) =>
{
gcodeOptions.PropertyChanged -= syncProperties;
};
}
public PrinterActionsBar(PrinterConfig printer, PrinterTabPage printerTabPage, ThemeConfig theme)
: base(theme)
{
this.printer = printer;
this.printerTabPage = printerTabPage;
this.HAnchor = HAnchor.Stretch;
this.VAnchor = VAnchor.Fit;
var defaultMargin = theme.ButtonSpacing;
// add the reset button first (if there is one)
if (printer.Settings.GetValue <bool>(SettingsKey.show_reset_connection))
{
var resetConnectionButton = new TextIconButton(
"Reset".Localize(),
AggContext.StaticData.LoadIcon("e_stop.png", 14, 14, theme.InvertIcons),
theme)
{
ToolTipText = "Reboots the firmware on the controller".Localize(),
Margin = defaultMargin
};
resetConnectionButton.Click += (s, e) =>
{
UiThread.RunOnIdle(printer.Connection.RebootBoard);
};
this.AddChild(resetConnectionButton);
}
this.AddChild(new PrinterConnectButton(printer, theme));
// add the start print button
GuiWidget startPrintButton;
this.AddChild(startPrintButton = new PrintPopupMenu(printer, theme)
{
Margin = theme.ButtonSpacing
});
void SetPrintButtonStyle(object s, EventArgs e)
{
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.FinishedPrint:
case CommunicationStates.Connected:
theme.ApplyPrimaryActionStyle(startPrintButton);
break;
default:
theme.RemovePrimaryActionStyle(startPrintButton);
break;
}
}
// make sure the buttons state is set correctly
printer.Connection.CommunicationStateChanged += SetPrintButtonStyle;
startPrintButton.Closed += (s, e) => printer.Connection.CommunicationStateChanged -= SetPrintButtonStyle;
// and set the style right now
SetPrintButtonStyle(this, null);
this.AddChild(new SliceButton(printer, printerTabPage, theme)
{
Name = "Generate Gcode Button",
Margin = theme.ButtonSpacing,
});
// Add vertical separator
this.AddChild(new ToolbarSeparator(theme)
{
VAnchor = VAnchor.Absolute,
Height = theme.ButtonHeight,
});
var buttonGroupB = new ObservableCollection <GuiWidget>();
var iconPath = Path.Combine("ViewTransformControls", "model.png");
modelViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Model View Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Model || printer == null,
ToolTipText = "Model View".Localize(),
Margin = theme.ButtonSpacing
};
modelViewButton.Click += SwitchModes_Click;
buttonGroupB.Add(modelViewButton);
AddChild(modelViewButton);
viewModes.Add(PartViewMode.Model, modelViewButton);
iconPath = Path.Combine("ViewTransformControls", "gcode_3d.png");
layers3DButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers3D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers3D,
ToolTipText = "3D Layer View".Localize(),
Margin = theme.ButtonSpacing
};
layers3DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers3DButton);
viewModes.Add(PartViewMode.Layers3D, layers3DButton);
if (!UserSettings.Instance.IsTouchScreen)
{
this.AddChild(layers3DButton);
}
iconPath = Path.Combine("ViewTransformControls", "gcode_2d.png");
layers2DButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers2D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers2D,
ToolTipText = "2D Layer View".Localize(),
Margin = theme.ButtonSpacing,
};
layers2DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers2DButton);
this.AddChild(layers2DButton);
viewModes.Add(PartViewMode.Layers2D, layers2DButton);
this.AddChild(new HorizontalSpacer());
int hotendCount = printer.Settings.Helpers.HotendCount();
if (!printer.Settings.GetValue <bool>(SettingsKey.sla_printer))
{
for (int extruderIndex = 0; extruderIndex < hotendCount; extruderIndex++)
{
this.AddChild(new TemperatureWidgetHotend(printer, extruderIndex, theme, hotendCount)
{
Margin = new BorderDouble(right: 10)
});
}
}
if (printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed))
{
this.AddChild(new TemperatureWidgetBed(printer, theme));
}
this.OverflowButton.Name = "Printer Overflow Menu";
this.ExtendOverflowMenu = (popupMenu) =>
{
this.GeneratePrinterOverflowMenu(popupMenu, ApplicationController.Instance.MenuTheme);
};
printer.ViewState.ViewModeChanged += (s, e) =>
{
if (viewModes[e.ViewMode] is RadioIconButton activeButton &&
viewModes[e.PreviousMode] is RadioIconButton previousButton &&
!buttonIsBeingClicked)
{
// Show slide to animation from previous to current, on completion update view to current by setting active.Checked
previousButton.SlideToNewState(
activeButton,
this,
() =>
{
activeButton.Checked = true;
},
theme);
}
};
// Register listeners
printer.Connection.ConnectionSucceeded += CheckForPrintRecovery;
// if we are already connected than check if there is a print recovery right now
if (printer.Connection.CommunicationState == CommunicationStates.Connected)
{
CheckForPrintRecovery(null, null);
}
}
public ViewControls3D(PartWorkspace workspace, ThemeConfig theme, UndoBuffer undoBuffer, bool isPrinterType, bool showPrintButton)
: base(theme)
{
this.theme = theme;
this.undoBuffer = undoBuffer;
this.ActionArea.Click += (s, e) =>
{
view3DWidget.Object3DControlLayer.Focus();
};
this.OverflowButton.ToolTipText = "Tool Bar Overflow".Localize();
this.OverflowButton.DynamicPopupContent = () =>
{
bool IncludeInMenu(SceneOperation operation)
{
foreach (var widget in this.ActionArea.Children.Where(c => !c.Visible && !ignoredInMenuTypes.Contains(c.GetType())))
{
if (operationButtons.TryGetValue(widget, out SceneOperation buttonOperation) &&
buttonOperation == operation)
{
return(true);
}
}
return(false);
}
return(SceneOperations.GetToolbarOverflowMenu(AppContext.MenuTheme, sceneContext, IncludeInMenu));
};
this.IsPrinterMode = isPrinterType;
this.sceneContext = workspace.SceneContext;
this.workspace = workspace;
string iconPath;
this.AddChild(CreateAddButton(sceneContext, theme));
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
bedMenuButton = new PopupMenuButton(StaticData.Instance.LoadIcon("bed.png", 16, 16, theme.InvertIcons), theme)
{
Name = "Bed Options Menu",
ToolTipText = "Bed",
Enabled = true,
Margin = theme.ButtonSpacing,
VAnchor = VAnchor.Center,
DrawArrow = true
};
this.AddChild(bedMenuButton);
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
this.AddChild(CreateOpenButton(theme));
this.AddChild(CreateSaveButton(theme));
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
undoButton = new IconButton(StaticData.Instance.LoadIcon("Undo_grey_16x.png", 16, 16, theme.InvertIcons), theme)
{
Name = "3D View Undo",
ToolTipText = "Undo".Localize(),
Enabled = false,
Margin = theme.ButtonSpacing,
VAnchor = VAnchor.Center
};
undoButton.Click += (sender, e) =>
{
sceneContext.Scene.Undo();
view3DWidget.Object3DControlLayer.Focus();
};
this.AddChild(undoButton);
redoButton = new IconButton(StaticData.Instance.LoadIcon("Redo_grey_16x.png", 16, 16, theme.InvertIcons), theme)
{
Name = "3D View Redo",
Margin = theme.ButtonSpacing,
ToolTipText = "Redo".Localize(),
Enabled = false,
VAnchor = VAnchor.Center
};
redoButton.Click += (sender, e) =>
{
sceneContext.Scene.Redo();
view3DWidget.Object3DControlLayer.Focus();
};
this.AddChild(redoButton);
if (showPrintButton)
{
var printButton = new TextButton("Print", theme)
{
Name = "Print Button",
BackgroundColor = theme.AccentMimimalOverlay
};
printButton.Click += (s, e) =>
{
view3DWidget.PushToPrinterAndPrint();
};
this.AddChild(printButton);
}
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
undoButton.Enabled = undoBuffer.UndoCount > 0;
redoButton.Enabled = undoBuffer.RedoCount > 0;
var buttonGroupA = new ObservableCollection <GuiWidget>();
if (UserSettings.Instance.IsTouchScreen)
{
iconPath = Path.Combine("ViewTransformControls", "rotate.png");
rotateButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 32, 32, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupA,
ToolTipText = "Rotate (Alt + Left Mouse)".Localize(),
Margin = theme.ButtonSpacing
};
rotateButton.Click += (s, e) => this.ActiveButton = ViewControls3DButtons.Rotate;
buttonGroupA.Add(rotateButton);
AddChild(rotateButton);
iconPath = Path.Combine("ViewTransformControls", "translate.png");
translateButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 32, 32, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupA,
ToolTipText = "Move (Shift + Left Mouse)".Localize(),
Margin = theme.ButtonSpacing
};
translateButton.Click += (s, e) => this.ActiveButton = ViewControls3DButtons.Translate;
buttonGroupA.Add(translateButton);
AddChild(translateButton);
iconPath = Path.Combine("ViewTransformControls", "scale.png");
scaleButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 32, 32, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupA,
ToolTipText = "Zoom (Ctrl + Left Mouse)".Localize(),
Margin = theme.ButtonSpacing
};
scaleButton.Click += (s, e) => this.ActiveButton = ViewControls3DButtons.Scale;
buttonGroupA.Add(scaleButton);
AddChild(scaleButton);
rotateButton.Checked = true;
// Add vertical separator
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
iconPath = Path.Combine("ViewTransformControls", "partSelect.png");
partSelectButton = new RadioIconButton(StaticData.Instance.LoadIcon(iconPath, 32, 32, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupA,
ToolTipText = "Select Part".Localize(),
Margin = theme.ButtonSpacing
};
partSelectButton.Click += (s, e) => this.ActiveButton = ViewControls3DButtons.PartSelect;
buttonGroupA.Add(partSelectButton);
AddChild(partSelectButton);
}
operationButtons = new Dictionary <GuiWidget, SceneOperation>();
// Add Selected IObject3D -> Operations to toolbar
foreach (var namedAction in SceneOperations.All)
{
if (namedAction is SceneSelectionSeparator)
{
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
continue;
}
// add the create support before the align
if (namedAction is OperationGroup group &&
group.Id == "Transform")
{
this.AddChild(CreateSupportButton(theme));
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
}
GuiWidget button = null;
if (namedAction is OperationGroup operationGroup)
{
if (operationGroup.Collapse)
{
var defaultOperation = operationGroup.GetDefaultOperation();
PopupMenuButton groupButton = null;
groupButton = theme.CreateSplitButton(
new SplitButtonParams()
{
Icon = defaultOperation.Icon(theme.InvertIcons),
DefaultAction = (menuButton) =>
{
defaultOperation.Action.Invoke(sceneContext);
},
DefaultActionTooltip = defaultOperation.HelpText ?? defaultOperation.Title,
ButtonName = defaultOperation.Title,
ExtendPopupMenu = (PopupMenu popupMenu) =>
{
foreach (var operation in operationGroup.Operations)
{
var operationMenu = popupMenu.CreateMenuItem(operation.Title, operation.Icon?.Invoke(theme.InvertIcons));
operationMenu.Enabled = operation.IsEnabled(sceneContext);
operationMenu.ToolTipText = operation.Title;
if (!operationMenu.Enabled &&
!string.IsNullOrEmpty(operation.HelpText))
{
operationMenu.ToolTipText += "\n\n" + operation.HelpText;
}
operationMenu.Click += (s, e) => UiThread.RunOnIdle(() =>
{
if (defaultOperation != operation)
{
// Update button
var iconButton = groupButton.Children.OfType <IconButton>().First();
iconButton.SetIcon(operation.Icon(theme.InvertIcons));
iconButton.ToolTipText = operation.HelpText ?? operation.Title;
UserSettings.Instance.set(operationGroup.GroupRecordId, operationGroup.Operations.IndexOf(operation).ToString());
defaultOperation = operation;
iconButton.Invalidate();
}
operation.Action?.Invoke(sceneContext);
});
}
}
},
operationGroup);
button = groupButton;
}
else
{
if (!(this.ActionArea.Children.LastOrDefault() is ToolbarSeparator))
{
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
}
foreach (var operation in operationGroup.Operations)
{
var operationButton = new OperationIconButton(operation, sceneContext, theme);
operationButtons.Add(operationButton, operation);
this.AddChild(operationButton);
}
this.AddChild(new ToolbarSeparator(theme.GetBorderColor(50), theme.SeparatorMargin));
}
}
else if (namedAction.Icon != null)
{
button = new IconButton(namedAction.Icon(theme.InvertIcons), theme)
{
Name = namedAction.Title + " Button",
ToolTipText = namedAction.Title,
Margin = theme.ButtonSpacing,
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
}
else
{
button = new TextButton(namedAction.Title, theme)
{
Name = namedAction.Title + " Button",
Margin = theme.ButtonSpacing,
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
}
if (button != null)
{
operationButtons.Add(button, namedAction);
// Only bind Click event if not a SplitButton
if (!(button is PopupMenuButton))
{
button.Click += (s, e) => UiThread.RunOnIdle(() =>
{
namedAction.Action.Invoke(sceneContext);
var partTab = button.Parents <PartTabPage>().FirstOrDefault();
var view3D = partTab.Descendants <View3DWidget>().FirstOrDefault();
view3D.Object3DControlLayer.Focus();
});
}
this.AddChild(button);
}
}
// Register listeners
undoBuffer.Changed += UndoBuffer_Changed;
sceneContext.Scene.SelectionChanged += UpdateToolbarButtons;
sceneContext.Scene.ItemsModified += UpdateToolbarButtons;
// Run on load
UpdateToolbarButtons(null, null);
}
public PrinterActionsBar(PrinterConfig printer, PrinterTabPage printerTabPage, ThemeConfig theme)
: base(theme)
{
this.printer = printer;
this.printerTabPage = printerTabPage;
this.HAnchor = HAnchor.Stretch;
this.VAnchor = VAnchor.Fit;
var defaultMargin = theme.ButtonSpacing;
// add the reset button first (if there is one)
if (printer.Settings.GetValue <bool>(SettingsKey.show_reset_connection))
{
var resetConnectionButton = new TextIconButton(
"Reset".Localize(),
AggContext.StaticData.LoadIcon("e_stop.png", 14, 14, theme.InvertIcons),
theme)
{
ToolTipText = "Reboots the firmware on the controller".Localize(),
Margin = defaultMargin
};
resetConnectionButton.Click += (s, e) =>
{
UiThread.RunOnIdle(printer.Connection.RebootBoard);
};
this.AddChild(resetConnectionButton);
}
this.AddChild(new PrinterConnectButton(printer, theme));
this.AddChild(new PrintButton(printer, theme));
this.AddChild(new SliceButton(printer, printerTabPage, theme)
{
Name = "Generate Gcode Button",
Margin = theme.ButtonSpacing,
});
// Add vertical separator
this.AddChild(new ToolbarSeparator(theme)
{
VAnchor = VAnchor.Absolute,
Height = theme.ButtonHeight,
});
var buttonGroupB = new ObservableCollection <GuiWidget>();
var iconPath = Path.Combine("ViewTransformControls", "model.png");
modelViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Model View Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Model || printer == null,
ToolTipText = "Model View".Localize(),
Margin = theme.ButtonSpacing
};
modelViewButton.Click += SwitchModes_Click;
buttonGroupB.Add(modelViewButton);
AddChild(modelViewButton);
iconPath = Path.Combine("ViewTransformControls", "gcode_3d.png");
layers3DButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers3D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers3D,
ToolTipText = "3D Layer View".Localize(),
Margin = theme.ButtonSpacing
};
layers3DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers3DButton);
if (!UserSettings.Instance.IsTouchScreen)
{
this.AddChild(layers3DButton);
}
iconPath = Path.Combine("ViewTransformControls", "gcode_2d.png");
layers2DButton = new RadioIconButton(AggContext.StaticData.LoadIcon(iconPath, 16, 16, theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroupB,
Name = "Layers2D Button",
Checked = printer?.ViewState.ViewMode == PartViewMode.Layers2D,
ToolTipText = "2D Layer View".Localize(),
Margin = theme.ButtonSpacing,
};
layers2DButton.Click += SwitchModes_Click;
buttonGroupB.Add(layers2DButton);
this.AddChild(layers2DButton);
this.AddChild(new HorizontalSpacer());
bool shareTemp = printer.Settings.GetValue <bool>(SettingsKey.extruders_share_temperature);
int extruderCount = shareTemp ? 1 : printer.Settings.GetValue <int>(SettingsKey.extruder_count);
if (!printer.Settings.GetValue <bool>(SettingsKey.sla_printer))
{
for (int extruderIndex = 0; extruderIndex < extruderCount; extruderIndex++)
{
this.AddChild(new TemperatureWidgetHotend(printer, extruderIndex, theme)
{
Margin = new BorderDouble(right: 10)
});
}
}
if (printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed))
{
this.AddChild(new TemperatureWidgetBed(printer, theme));
}
this.OverflowButton.Name = "Printer Overflow Menu";
this.ExtendOverflowMenu = (popupMenu) =>
{
this.GeneratePrinterOverflowMenu(popupMenu, ApplicationController.Instance.MenuTheme);
};
printer.ViewState.ViewModeChanged += (s, e) =>
{
RadioIconButton activeButton = null;
if (e.ViewMode == PartViewMode.Layers2D)
{
activeButton = layers2DButton;
}
else if (e.ViewMode == PartViewMode.Layers3D)
{
activeButton = layers3DButton;
}
else
{
activeButton = modelViewButton;
}
if (activeButton != null)
{
activeButton.Checked = true;
if (!buttonIsBeingClicked)
{
activeButton.FlashBackground(theme.Colors.PrimaryAccentColor.WithContrast(theme.Colors.PrimaryTextColor, 6).ToColor());
}
}
};
printer.Connection.ConnectionSucceeded.RegisterEvent((s, e) =>
{
UiThread.RunOnIdle(() =>
{
PrintRecovery.CheckIfNeedToRecoverPrint(printer);
});
}, ref unregisterEvents);
}
public override void Initialize(int tabIndex)
{
// Enum keyed on name to friendly name
var enumItems = Enum.GetNames(property.PropertyType).Select(enumName =>
{
return(new
{
Key = enumName,
Value = enumName.Replace('_', ' ')
});
});
var iconsRow = new FlowLayoutWidget();
int index = 0;
var radioButtonSize = new Vector2(iconsAttribute.Width, iconsAttribute.Height);
foreach (var enumItem in enumItems)
{
var localIndex = index;
ImageBuffer iconImage = null;
var iconPath = iconsAttribute.IconPaths[localIndex];
if (!string.IsNullOrWhiteSpace(iconPath))
{
if (iconsAttribute.Width > 0)
{
iconImage = AggContext.StaticData.LoadIcon(iconPath, iconsAttribute.Width, iconsAttribute.Height);
}
else
{
iconImage = AggContext.StaticData.LoadIcon(iconPath);
}
var radioButton = new RadioIconButton(iconImage, theme)
{
ToolTipText = enumItem.Key
};
radioButtonSize = new Vector2(radioButton.Width, radioButton.Height);
// set it if checked
if (enumItem.Value == this.InitialValue)
{
radioButton.Checked = true;
}
iconsRow.AddChild(radioButton);
var localItem = enumItem;
radioButton.CheckedStateChanged += (s, e) =>
{
if (radioButton.Checked)
{
this.SetValue(localItem.Key, true);
}
};
}
else if (iconsAttribute.Width > 0)
{
// hold the space of the empty icon
iconsRow.AddChild(new GuiWidget(radioButtonSize.X, radioButtonSize.Y));
}
index++;
}
this.Content = iconsRow;
}
public ModelOptionsPanel(BedConfig sceneContext, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
var buttonPanel = new FlowLayoutWidget()
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit
};
var buttonGroup = new ObservableCollection <GuiWidget>();
var shadedViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon("view_shaded.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Shaded Button",
Checked = sceneContext.ViewState.RenderType == RenderTypes.Shaded,
ToolTipText = "Shaded".Localize(),
Margin = theme.ButtonSpacing
};
shadedViewButton.Click += (s, e) => sceneContext.ViewState.RenderType = RenderTypes.Shaded;
buttonGroup.Add(shadedViewButton);
buttonPanel.AddChild(shadedViewButton);
var outlinesViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon("view_outlines.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Outlines Button",
Checked = sceneContext.ViewState.RenderType == RenderTypes.Outlines,
ToolTipText = "Outlines".Localize(),
Margin = theme.ButtonSpacing
};
outlinesViewButton.Click += (s, e) => sceneContext.ViewState.RenderType = RenderTypes.Outlines;
buttonGroup.Add(outlinesViewButton);
buttonPanel.AddChild(outlinesViewButton);
var polygonsViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon("view_polygons.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Polygons Button",
Checked = sceneContext.ViewState.RenderType == RenderTypes.Polygons,
ToolTipText = "Polygons".Localize(),
Margin = theme.ButtonSpacing
};
polygonsViewButton.Click += (s, e) => sceneContext.ViewState.RenderType = RenderTypes.Polygons;
buttonGroup.Add(polygonsViewButton);
buttonPanel.AddChild(polygonsViewButton);
var materialsViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon("view_materials.png"), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Materials Button",
Checked = sceneContext.ViewState.RenderType == RenderTypes.Materials,
ToolTipText = "Materials".Localize(),
Margin = theme.ButtonSpacing
};
materialsViewButton.Click += (s, e) => sceneContext.ViewState.RenderType = RenderTypes.Materials;
buttonGroup.Add(materialsViewButton);
buttonPanel.AddChild(materialsViewButton);
var overhangViewButton = new RadioIconButton(AggContext.StaticData.LoadIcon("view_overhang.png"), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Overhang Button",
Checked = sceneContext.ViewState.RenderType == RenderTypes.Overhang,
ToolTipText = "Overhang".Localize(),
Margin = theme.ButtonSpacing
};
overhangViewButton.Click += (s, e) => sceneContext.ViewState.RenderType = RenderTypes.Overhang;
buttonGroup.Add(overhangViewButton);
buttonPanel.AddChild(overhangViewButton);
this.AddChild(
new SettingsItem(
"View Style".Localize(),
buttonPanel,
theme,
enforceGutter: false)
{
Border = 0
});
foreach (var option in sceneContext.GetBaseViewOptions())
{
if (option.IsVisible())
{
this.AddChild(
new SettingsItem(
option.Title,
theme,
new SettingsItem.ToggleSwitchConfig()
{
Name = option.Title + " Toggle",
Checked = option.IsChecked(),
ToggleAction = option.SetValue
},
enforceGutter: false)
);
}
}
}
