public void Build(PanelType_e panelType, PanelProfile_e profile, Vector2 sizePanel, Materials_e OuterMaterial, Materials_e InnerMaterial, double outThickness, double innerThickness)
{
this.sizePanel = sizePanel;
this.innerThickness = innerThickness;
this.outThickness = outThickness;
this.isDoublePanal = CutPanel.IsCut(sizePanel);
#region calculate panel dimention by profile
switch (profile)
{
case PanelProfile_e.Profile_3_0:
innerHeight = sizePanel.X - 7;
innerWeidht = sizePanel.Y - 7;
lenght = 27;
deepInsulation = 20;
break;
case PanelProfile_e.Profile_5_0:
innerHeight = sizePanel.X - 10;
innerWeidht = sizePanel.Y - 10;
lenght = 48;
deepInsulation = 45;
break;
case PanelProfile_e.Profile_7_0:
innerHeight = sizePanel.X - 10;
innerWeidht = sizePanel.Y - 10;
lenght = 50;
deepInsulation = 45;
break;
}
#endregion
#region calculate distance between the handles
widthHandle = sizePanel.X / 2;
if (sizePanel.X < 1000)
{
widthHandle = sizePanel.X * 0.5;
}
if (sizePanel.X >= 1000)
{
widthHandle = sizePanel.X * 0.45;
}
if (sizePanel.X >= 1300)
{
widthHandle = sizePanel.X * 0.4;
}
if (sizePanel.X >= 1700)
{
widthHandle = sizePanel.X * 0.35;
}
isOneHandle = sizePanel.X > 750 ? false : true;
#endregion
OpenTemplate(panelType);
DeleteComponents((int)panelType);
CalculateRivetStep();
if (isDoublePanal)
{
DoublePanel(panelType, OuterMaterial, InnerMaterial, profile);
}
else
{
SinglePanel(panelType, OuterMaterial, InnerMaterial, profile);
}
Insulation(profile);
AssemblyName = "02-" + (int)panelType + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
ModelDoc2 asm = AssemblyDocument as ModelDoc2;
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, AssemblyName + ".SLDASM");
asm.ForceRebuild3(false);
asm.Extension.SaveAs(base.NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, /* (int)swSaveAsOptions_e.swSaveAsOptions_Silent +*/ (int)swSaveAsOptions_e.swSaveAsOptions_SaveReferenced + (int)swSaveAsOptions_e.swSaveAsOptions_UpdateInactiveViews, null, ref errors, warnings);
InitiatorSaveExeption(errors, warnings, base.NewPartPath);
}
private void DoublePanel(PanelType_e panelType, Materials_e OuterMaterial, Materials_e InnerMaterial, PanelProfile_e profile)
{
base.PartName = "02-" + (int)panelType + "-01-" + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-101-50-1@02-104-50", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
if (SetBends != null)
{
SetBends((decimal)outThickness, out KFactor, out BendRadius);
}
base.parameters.Add("D1@Эскиз1", sizePanel.Y);
base.parameters.Add("D2@Эскиз1", sizePanel.X / 2);
base.parameters.Add("D1@Кривая4", rivetH);
base.parameters.Add("D1@Кривая3", rivetWd);
base.parameters.Add("D1@Кривая5", rivetH);
base.parameters.Add("D7@Ребро-кромка2", lenght);
base.parameters.Add("D2@Эскиз47", widthHandle / 2);
base.parameters.Add("Толщина@Листовой металл", outThickness);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
EditPartParameters("02-01-101-50", base.NewPartPath);
}
base.PartName = "02-" + (int)panelType + "-02-" + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-102-50-1@02-104-50", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
if (SetBends != null)
{
SetBends((decimal)outThickness, out KFactor, out BendRadius);
}
base.parameters.Add("D1@Эскиз1", sizePanel.Y - 10);
base.parameters.Add("D2@Эскиз1", (sizePanel.X - 10) / 2);
base.parameters.Add("D1@Кривая3", rivetH);
base.parameters.Add("D1@Кривая2", rivetH);
base.parameters.Add("D1@Кривая1", rivetWd);
base.parameters.Add("Толщина@Листовой металл", outThickness);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
EditPartParameters("02-01-102-50", base.NewPartPath);
}
base.PartName = "02-" + (int)panelType + "-03-" + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
if (false)
{
SolidWorksDocument.Extension.SelectByID2("02-01-103-50-1@02-104-50", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
if (SetBends != null)
{
SetBends((decimal)outThickness, out KFactor, out BendRadius);
}
base.parameters.Add("D1@Эскиз1", sizePanel.Y - 15);
base.parameters.Add("D1@Кривая1", rivetH);
base.parameters.Add("D2@Эскиз1", lenght - innerThickness - outThickness - 1);
base.parameters.Add("Толщина@Листовой металл", outThickness);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
EditPartParameters("02-01-103-50", base.NewPartPath);
}
}
/// <summary>
/// Build Insulation
/// </summary>
private void Insulation(PanelProfile_e profile)
{
string MaterialsFolder = "Materials";
PartName = "02-03-" + (profile == PanelProfile_e.Profile_5_0 ? string.Empty : ((int)profile).ToString()) + sizePanel.X + "-" + sizePanel.Y;
string tapeMaterialName = string.Empty, insulationMaterialName = string.Empty;
switch (profile)
{
case PanelProfile_e.Profile_3_0:
tapeMaterialName = "Лента 30";
insulationMaterialName = "";
break;
case PanelProfile_e.Profile_5_0:
tapeMaterialName = "Лента 50";
insulationMaterialName = "";
break;
case PanelProfile_e.Profile_7_0:
tapeMaterialName = "Лента 50";
insulationMaterialName = "";
break;
}
SolidWorksDocument.Extension.CustomPropertyManager["00"].Add3("Наименование", (int)swCustomInfoType_e.swCustomInfoText, tapeMaterialName, (int)swCustomPropertyAddOption_e.swCustomPropertyReplaceValue);
SolidWorksDocument.Extension.CustomPropertyManager["00"].Add3("Наименование", (int)swCustomInfoType_e.swCustomInfoText, insulationMaterialName, (int)swCustomPropertyAddOption_e.swCustomPropertyReplaceValue);
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-003@" + AssemblyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, MaterialsFolder, PartName);
base.parameters.Add("D1@Эскиз1", innerWeidht);
base.parameters.Add("D2@Эскиз1", innerHeight);
base.parameters.Add("D1@Бобышка-Вытянуть1", deepInsulation);
// TO DO change lenght by profile, propertis
EditPartParameters("02-01-003", base.NewPartPath);
}
PartName = "02-04-" + (profile == PanelProfile_e.Profile_5_0 ? string.Empty : ((int)profile).ToString()) + sizePanel.X + "-" + sizePanel.Y;
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-004@" + AssemblyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, MaterialsFolder, PartName);
base.parameters.Add("D6@Эскиз1", innerWeidht);
base.parameters.Add("D3@Эскиз1", innerHeight);
EditPartParameters("02-01-004", base.NewPartPath);
}
}
private void SinglePanel(PanelType_e panelType, Materials_e OuterMaterial, Materials_e InnerMaterial, PanelProfile_e profile)
{
base.PartName = "02-" + (int)panelType + "-01-" + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
if (CheckExistPart != null)
{
CheckExistPart(base.PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-001-1@02-01", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
// outer panel
if (SetBends != null)
{
SetBends((decimal)outThickness, out KFactor, out BendRadius);
}
base.parameters.Add("D1@Эскиз1", sizePanel.Y);
base.parameters.Add("D2@Эскиз1", sizePanel.X);
base.parameters.Add("D1@Кривая2", rivetH);
base.parameters.Add("D1@Кривая1", rivetW);
base.parameters.Add("D7@Ребро-кромка1", lenght);
base.parameters.Add("Толщина@Листовой металл", outThickness);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
if (panelType == PanelType_e.RemovablePanel && !isOneHandle)
{
base.parameters.Add("D4@Эскиз30", widthHandle);
}
EditPartParameters("02-01-001", base.NewPartPath);
}
base.PartName = "02-" + (int)panelType + "-02-" + sizePanel.X + "-" + sizePanel.Y + "-" + OuterMaterial + "-" + InnerMaterial + "-" + (int)profile;
if (CheckExistPart != null)
{
CheckExistPart(base.PartName, out IsPartExist, out NewPartPath);
}
if (IsPartExist)
{
SolidWorksDocument.Extension.SelectByID2("02-01-002-1@02-01", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", false, true);
}
else
{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
if (SetBends != null)
{
SetBends((decimal)innerThickness, out KFactor, out BendRadius);
}
base.parameters.Add("D1@Эскиз1", innerWeidht);
base.parameters.Add("D2@Эскиз1", innerHeight);
base.parameters.Add("D1@Кривая2", rivetW);
base.parameters.Add("D1@Кривая1", rivetH);
base.parameters.Add("Толщина@Листовой металл", innerThickness);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
EditPartParameters("02-01-002", base.NewPartPath);
}
}
