} // end InterceptCtrlC()
protected override void ProcessRecord()
{
if (!DbgProvider.IsInGuestMode)
{
throw new InvalidOperationException("This command is only intended to be used by the !dbgshell implementation.");
}
LogManager.Trace("WaitForBangDbgShellCommandCommand.ProcessRecord: DbgShell is going dormant.");
using (var disposer = new ExceptionGuard())
{
disposer.Protect(SetDebuggerAndContextAndUpdateCallbacks());
disposer.Protect(InterceptCtrlC());
disposer.Protect(Debugger.SuspendEventOutput()); // don't want our "modload" output etc. spewing while we are dormant
base.ProcessRecord();
// We need to perform the wait on another thread, because we need to "pump"
// on this thread, so that debug event callbacks can queue WriteObject calls
// to this thread.
_RegisterWaitForGuestModeEvent(disposer);
// Give the user a hint about what's going on.
var s = new ColorString(ConsoleColor.DarkGray,
"(DbgShell will remain running in the background until you run !dbgshell again)").ToString(true);
Host.UI.WriteLine(s);
MsgLoop.Prepare();
// This will allow the extension command to return (it tells the dbgeng
// thread that it can return).
DbgProvider.GuestModePassivate();
MsgLoop.Run(); // This will complete when the guest mode event gets signaled.
} // end using( disposer )
} // end ProcessRecord()
protected void ProcessRecord(bool callWaitForEventDespiteCurrentStatus)
{
base.ProcessRecord();
DEBUG_STATUS currentStatus = Debugger.GetExecutionStatus();
LogManager.Trace("ExecutionBaseCommand.ProcessRecord: Current status is {0}.", currentStatus);
if (!callWaitForEventDespiteCurrentStatus && (DEBUG_STATUS.BREAK == currentStatus))
{
// TODO: This is for attaching to a debugging server. Need to test it. Other cases?
// Perhaps this logic should be changed to be more clear?
LogManager.Trace("ExecutionBaseCommand: current status is already BREAK; will not call WaitForEvent.");
return; // Don't need to call WaitForEvent.
}
using (InterceptCtrlC())
{
// We need to perform the wait on another thread, because we need to "pump"
// on this thread, so that debug event callbacks can queue WriteObject calls
// to this thread.
LogManager.Trace("ExecutionBaseCommand: calling WaitForEvent (on dbgeng thread).");
MsgLoop.Prepare();
Task waitTask = Debugger.WaitForEventAsync();
waitTask.ContinueWith((x) => { MsgLoop.SignalDone(); });
MsgLoop.Run();
Util.Await(waitTask); // in case it threw
} // end using( InterceptCtrlC )
} // end ProcessRecord()
} // end _CallExtensionAsync()
protected override void ProcessRecord()
{
var inputCallbacks = Debugger.GetInputCallbacks() as DebugInputCallbacks;
if (null != inputCallbacks)
{
inputCallbacks.UpdateCmdlet(this);
}
// TODO: Why does this cmdlet even need to be an ExecutionBaseCommand?
using (InterceptCtrlC())
using (Debugger.SetCurrentCmdlet(this))
{
ulong hExt = 0;
int dotIdx = ExtensionCommand.LastIndexOf('.');
if (dotIdx > 0)
{
if (dotIdx == (ExtensionCommand.Length - 1))
{
throw new ArgumentException("ExtensionCommand cannot end with a '.'.");
}
string extName = ExtensionCommand.Substring(0, dotIdx);
var elr = Debugger.GetExtensionDllHandle(extName, true);
if (null == elr)
{
throw new DbgProviderException(Util.Sprintf("Could not find/load extension: {0}.",
extName),
"CouldNotLoadExtension",
ErrorCategory.ObjectNotFound,
extName);
}
if (!String.IsNullOrEmpty(elr.LoadOutput))
{
SafeWriteObject(elr.LoadOutput);
}
ExtensionCommand = ExtensionCommand.Substring(dotIdx + 1);
}
MsgLoop.Prepare();
Task t = _CallExtensionAsync(hExt, ExtensionCommand, ExtensionArgs);
MsgLoop.Run();
Host.UI.WriteLine();
Util.Await(t); // in case it threw
} // end using( InterceptCtrlC )
} // end ProcessRecord()
} // end _FixPsPathsInSymbolPath()
protected override void ProcessRecord()
{
base.ProcessRecord();
if (null == Path)
{
Path = String.Empty;
}
//
// Fix PS-specific paths.
//
var fixedPath = _FixPsPathsInSymbolPath(Path, GetUnresolvedProviderPathFromPSPath);
if (0 == fixedPath.Length)
{
WriteWarning("The symbol path is empty.");
}
Debugger.SymbolPath = fixedPath;
if (PassThru)
{
WriteObject(Debugger.SymbolPath);
}
MsgLoop.Prepare();
// If the specified symbol path is inaccessible, the SetSymbolPathWide call
// will generate some warning dbgeng output. But we'd also like to be able to
// get output about the "expanded" symbol path. Unfortunately, there is no way
// to get that, except to parse ".sympath" output. Since executing ".sympath"
// will also repeat the warning about the inaccessible symbol path, we won't
// start displaying dbgeng output until now.
using (Debugger.HandleDbgEngOutput(_HandleDbgEngOutput))
{
// TODO: Feature request: no way to get expanded symbol path except to parse ".sympath" output.
var t = Debugger.InvokeDbgEngCommandAsync(".sympath", false);
t.ContinueWith((x) => MsgLoop.SignalDone());
MsgLoop.Run();
Util.Await(t); // in case it threw
}
} // end ProcessRecord()
} // end BeginProcessing()
protected override void ProcessRecord()
{
var inputCallbacks = Debugger.GetInputCallbacks() as DebugInputCallbacks;
if (null != inputCallbacks)
{
inputCallbacks.UpdateCmdlet(this);
}
//var outputCallbacks = Debugger.GetOutputCallbacks() as DebugOutputCallbacks;
//if( null != outputCallbacks )
// outputCallbacks.UpdateCmdlet( this );
using (var disposer = new ExceptionGuard())
{
disposer.Protect(Debugger.SetCurrentCmdlet(this));
disposer.Protect(InterceptCtrlC());
MsgLoop.Prepare();
string actualCommand = string.Join(" ", Command);
Task t = Debugger.InvokeDbgEngCommandAsync(actualCommand, OutputPrefix, _ConsumeLine);
Task t2 = t.ContinueWith(async(x) =>
{
DEBUG_STATUS execStatus = Debugger.GetExecutionStatus();
if (_StatusRequiresWait(execStatus))
{
LogManager.Trace("InvokeDbgExtensionCommand: Current execution status ({0}) indicates that we should enter a wait.",
execStatus);
await WaitForBreakAsync();
}
disposer.Dispose();
SignalDone();
}).Unwrap();
MsgLoop.Run();
Host.UI.WriteLine();
Util.Await(t); // in case it threw
Util.Await(t2); // in case it threw
} // end using( disposer )
} // end ProcessRecord()
protected override void ProcessRecord()
{
base.ProcessRecord();
using (var disposer = new ExceptionGuard(Debugger.HandleDbgEngOutput(_ConsumeLine)))
{
// Failure to load an extension should be a terminating error.
//
// Because the only reason to load an extension is so that you can call
// commands in it. And if you didn't load it, then none of those commands
// will work.
string providerPath = PathOrName;
if (providerPath.IndexOfAny(sm_dirSeparators) >= 0)
{
// We support PS paths.
//
// (we don't want to call GetUnresolvedProviderPathFromPSPath if it's
// just a bare name, else PS will interpret that as a relative path,
// which would be wrong)
providerPath = GetUnresolvedProviderPathFromPSPath(PathOrName);
}
MsgLoop.Prepare();
var t = Debugger.AddExtensionAsync(providerPath);
t.ContinueWith((x) => { disposer.Dispose(); SignalDone(); });
MsgLoop.Run();
var elr = Util.Await(t); // in case it threw
if (!string.IsNullOrEmpty(elr.LoadOutput))
{
SafeWriteObject(elr.LoadOutput);
}
SafeWriteVerbose("Loaded extension: {0}", PathOrName);
} // end using( disposer )
} // end ProcessRecord()
// I think this should be for kernel-mode only.
// [Parameter( Mandatory = false )]
// public SwitchParameter IgnoreInaccessibleMemory { get; set; }
protected override void ProcessRecord()
{
// Support relative paths in PS.
string dumpFileResolved = SessionState.Path.GetUnresolvedProviderPathFromPSPath(DumpFile);
DEBUG_FORMAT flags = DEBUG_FORMAT.DEFAULT;
flags |= DEBUG_FORMAT.USER_SMALL_FULL_MEMORY |
DEBUG_FORMAT.USER_SMALL_HANDLE_DATA |
DEBUG_FORMAT.USER_SMALL_UNLOADED_MODULES |
DEBUG_FORMAT.USER_SMALL_INDIRECT_MEMORY |
DEBUG_FORMAT.USER_SMALL_DATA_SEGMENTS |
DEBUG_FORMAT.USER_SMALL_PROCESS_THREAD_DATA |
DEBUG_FORMAT.USER_SMALL_PRIVATE_READ_WRITE_MEMORY |
DEBUG_FORMAT.USER_SMALL_FULL_MEMORY_INFO |
DEBUG_FORMAT.USER_SMALL_THREAD_INFO |
DEBUG_FORMAT.USER_SMALL_CODE_SEGMENTS |
DEBUG_FORMAT.USER_SMALL_FULL_AUXILIARY_STATE; // TODO: Need to learn what this means
// I think this should be for kernel-mode only.
// if( IgnoreInaccessibleMemory )
// {
// flags |= DEBUG_FORMAT.USER_SMALL_IGNORE_INACCESSIBLE_MEM;
// }
// TODO: Figure out these things, and see if there are new ones I don't know about:
// DEBUG_FORMAT.USER_SMALL_FILTER_MEMORY |
// DEBUG_FORMAT.USER_SMALL_FILTER_PATHS |
// DEBUG_FORMAT.USER_SMALL_NO_OPTIONAL_DATA |
// DEBUG_FORMAT.USER_SMALL_NO_AUXILIARY_STATE |
if (!AllowClobber)
{
flags |= DEBUG_FORMAT.NO_OVERWRITE;
}
if (Compress)
{
flags |= DEBUG_FORMAT.WRITE_CAB;
}
if (CompressWithSymbols)
{
flags |= DEBUG_FORMAT.WRITE_CAB;
flags |= DEBUG_FORMAT.CAB_SECONDARY_FILES;
// TODO: What is CAB_SECONDARY_ALL_IMAGES for? DbgEng.h says
//
// "When creating a CAB with secondary images do searches
// for all image files, regardless of whether they're
// needed for the current session or not."
//
// but I don't know what it means for an image file to be "needed" for the
// current session versus not.
}
if ((Compress || CompressWithSymbols) &&
!DumpFile.EndsWith(".cab", StringComparison.OrdinalIgnoreCase))
{
WriteWarning("Output will be compressed, but output file name does not end in '.cab'.");
WriteWarning("You will need to rename the resulting file to end with '.cab' if you want to be able to mount the dump file with Mount-DbgDumpFile.");
}
// TODO: Just let the API fail instead of doing this pre-check?
if (File.Exists(dumpFileResolved))
{
if (!AllowClobber)
{
// is there a better "already exists" exception?
WriteError(new InvalidOperationException(Util.Sprintf("The file '{0}' already exists. Use -AllowClobber to overwrite it.",
DumpFile)),
"DumpFileAlreadyExists",
ErrorCategory.ResourceExists,
DumpFile);
return;
}
}
using (var disposer = new ExceptionGuard())
{
disposer.Protect(Debugger.HandleDbgEngOutput((x) => SafeWriteVerbose(x.TrimEnd())));
disposer.Protect(new CtrlCInterceptor(_CtrlCHandler));
try
{
MsgLoop.Prepare();
var task = Debugger.WriteDumpAsync(DumpFile,
flags,
Comment,
CancelTS.Token);
task.ContinueWith((_t) => { disposer.Dispose(); SignalDone(); });
MsgLoop.Run();
Util.Await(task); // in case it threw
}
catch (DbgProviderException dpe)
{
if ((dpe.HResult == DebuggerObject.E_UNEXPECTED) &&
CancelTS.IsCancellationRequested)
{
WriteWarning("Dump file creation canceled.");
}
else
{
WriteError(dpe);
}
}
} // end using( dbgeng output, CTRL-C )
} // end ProcessRecord()