private void testMaster(ModbusMaster master)
{
for (var i = 0; i < 4; i++)
{
master.WriteCoil(1, us(3000 + i), false);
Thread.Sleep(50);
Assert.AreEqual(false, master.ReadCoil(1, us(3000 + i)));
master.WriteCoil(1, us(3000 + i), true);
Thread.Sleep(50);
Assert.AreEqual(true, master.ReadCoil(1, us(3000 + i)));
}
var s0 = bs(false, false, false, false);
var s1 = bs(false, true, true, false);
var s2 = bs(true, false, false, true);
master.WriteCoils(1, 3000, s1);
Thread.Sleep(50);
Assert.AreEqual(s1, master.ReadCoils(1, 3000, 4));
Thread.Sleep(50);
master.WriteCoils(1, 3000, s2);
Thread.Sleep(50);
Assert.AreEqual(s2, master.ReadCoils(1, 3000, 4));
Thread.Sleep(50);
master.WriteCoils(1, 3000, s0);
Thread.Sleep(50);
Assert.AreEqual(s0, master.ReadCoils(1, 3000, 4));
}
void Test(ModbusModel model, ModbusMaster master)
{
master.WriteCoil(1, 2, true);
Assert.AreEqual(true, master.ReadCoil(1, 2));
master.WriteCoil(1, 3, false);
Assert.AreEqual(false, master.ReadCoil(1, 3));
master.WriteCoils(1, 4, bo(false, true));
Assert.AreEqual(bo(true, false, false, true), master.ReadCoils(1, 2, 4));
model.setDIs(11, 12, bo(true, true, false, false));
Assert.AreEqual(true, master.ReadInput(11, 12));
Assert.AreEqual(true, master.ReadInput(11, 13));
Assert.AreEqual(false, master.ReadInput(11, 14));
Assert.AreEqual(false, master.ReadInput(11, 15));
Assert.AreEqual(bo(true, true, false, false), master.ReadInputs(11, 12, 4));
master.WriteRegister(1, 2, 0xabcd);
Assert.AreEqual(0xabcd, master.ReadHoldingRegister(1, 2));
master.WriteRegister(1, 3, 0xcdab);
Assert.AreEqual(0xcdab, master.ReadHoldingRegister(1, 3));
master.WriteRegisters(1, 4, us(0xcda1, 0xcda2));
Assert.AreEqual(us(0xabcd, 0xcdab, 0xcda1, 0xcda2), master.ReadHoldingRegisters(1, 2, 4));
model.setWIs(11, 12, us(0xabcd, 0xcdab, 0xcda1, 0xcda2));
Assert.AreEqual(0xabcd, master.ReadInputRegister(11, 12));
Assert.AreEqual(0xcdab, master.ReadInputRegister(11, 13));
Assert.AreEqual(0xcda1, master.ReadInputRegister(11, 14));
Assert.AreEqual(0xcda2, master.ReadInputRegister(11, 15));
Assert.AreEqual(us(0xabcd, 0xcdab, 0xcda1, 0xcda2), master.ReadInputRegisters(11, 12, 4));
}
public static void SharedSlaveTest(ModbusModel model, ModbusMaster master)
{
master.WriteCoil(1, 2, true);
Assert.AreEqual(true, master.ReadCoil(1, 2));
master.WriteCoil(1, 3, false);
Assert.AreEqual(false, master.ReadCoil(1, 3));
master.WriteCoils(1, 4, H.bo(false, true));
Assert.AreEqual(H.bo(true, false, false, true), master.ReadCoils(1, 2, 4));
//race condition avoided by access order
model.setDIs(11, 12, H.bo(true, true, false, false));
Assert.AreEqual(true, master.ReadInput(11, 12));
Assert.AreEqual(true, master.ReadInput(11, 13));
Assert.AreEqual(false, master.ReadInput(11, 14));
Assert.AreEqual(false, master.ReadInput(11, 15));
Assert.AreEqual(H.bo(true, true, false, false), master.ReadInputs(11, 12, 4));
master.WriteRegister(1, 2, 0xabcd);
Assert.AreEqual(0xabcd, master.ReadHoldingRegister(1, 2));
master.WriteRegister(1, 3, 0xcdab);
Assert.AreEqual(0xcdab, master.ReadHoldingRegister(1, 3));
master.WriteRegisters(1, 4, H.us(0xcda1, 0xcda2));
Assert.AreEqual(H.us(0xabcd, 0xcdab, 0xcda1, 0xcda2), master.ReadHoldingRegisters(1, 2, 4));
//race condition avoided by access order
model.setWIs(11, 12, H.us(0xabcd, 0xcdab, 0xcda1, 0xcda2));
Assert.AreEqual(0xabcd, master.ReadInputRegister(11, 12));
Assert.AreEqual(0xcdab, master.ReadInputRegister(11, 13));
Assert.AreEqual(0xcda1, master.ReadInputRegister(11, 14));
Assert.AreEqual(0xcda2, master.ReadInputRegister(11, 15));
Assert.AreEqual(H.us(0xabcd, 0xcdab, 0xcda1, 0xcda2), master.ReadInputRegisters(11, 12, 4));
}
public void ModportSweepTest()
{
//m0 - MD-DIDC8 8 digital input
//m1 - MD-DOSO8 8 digital output
//all outputs wired to corresponding inputs
var serial = new SerialPort("COM10");
serial.BaudRate = 57600;
serial.Open();
var stream = new ModbusSerialStream(serial, 400);
var protocol = new ModbusRTUProtocol();
var master = new ModbusMaster(stream, protocol);
master.WriteCoil(1, 3000, false);
master.WriteCoil(1, 3001, true);
master.WriteCoil(1, 3002, true);
master.WriteCoil(1, 3003, false);
Thread.Sleep(50);
Assert.AreEqual(false, master.ReadCoil(1, 3000));
Assert.AreEqual(true, master.ReadCoil(1, 3001));
Thread.Sleep(50);
Assert.AreEqual(new bool[] { false, true, true, false }, master.ReadCoils(1, 3000, 4));
}
public void DefaultTest()
{
var socket = Tools.ConnectWithTimeout("127.0.0.1", 9005, 400);
var stream = new ModbusSocketStream(socket, 400, StreamLog);
var protocol = new ModbusTCPProtocol();
protocol.TransactionId = 0xFA;
using (var master = new ModbusMaster(stream, protocol))
{
var count = 10;
while (--count > 0)
{
master.ReadCoil(1, 4096);
}
}
}
public void RackSweepTest()
{
//http://www.opto22.com/documents/1678_Modbus_TCP_Protocol_Guide.pdf
// required otg included in SharpOpto22
// m0.0 = 24V
// m0.1 = 0V
// m0.2 = m1.2
// m0.3 = m1.3
// m2.1 = m3.1
// m2.2 = m3.2
var socket = new TcpClient("10.77.0.2", 502);
var stream = new ModbusSocketStream(socket, 400);
var protocol = new ModbusTCPProtocol();
var master = new ModbusMaster(stream, protocol);
master.WriteCoils(1, 4, Bools(4, false)); //clear module
Thread.Sleep(50);
master.WriteCoils(1, 64, Bools(4, true)); //clear on latches
master.WriteCoils(1, 128, Bools(4, true)); //clear off latches
Assert.AreEqual(true, master.ReadCoil(1, 0));
Assert.AreEqual(false, master.ReadCoil(1, 1));
Assert.AreEqual(false, master.ReadCoil(1, 2));
Assert.AreEqual(false, master.ReadCoil(1, 3));
master.WriteCoil(1, 6, false);
master.WriteCoil(1, 7, false);
Thread.Sleep(50);
Assert.AreEqual(new bool[] { false, false }, master.ReadInputs(1, 64 + 2, 2));
Assert.AreEqual(new bool[] { false, false }, master.ReadInputs(1, 128 + 2, 2));
Assert.AreEqual(new bool[] { false, false }, master.ReadCoils(1, 6, 2));
Assert.AreEqual(new bool[] { true, false, false, false }, master.ReadCoils(1, 0, 4));
master.WriteCoil(1, 6, true);
master.WriteCoil(1, 7, false);
Thread.Sleep(50);
Assert.AreEqual(true, master.ReadCoil(1, 0));
Assert.AreEqual(false, master.ReadCoil(1, 1));
Assert.AreEqual(true, master.ReadCoil(1, 2));
Assert.AreEqual(false, master.ReadCoil(1, 3));
Assert.AreEqual(new bool[] { true, false }, master.ReadInputs(1, 64 + 2, 2));
Assert.AreEqual(new bool[] { false, false }, master.ReadInputs(1, 128 + 2, 2));
Assert.AreEqual(new bool[] { true, false }, master.ReadCoils(1, 6, 2));
Assert.AreEqual(new bool[] { true, false, true, false }, master.ReadCoils(1, 0, 4));
master.WriteCoil(1, 6, false);
master.WriteCoil(1, 7, true);
Thread.Sleep(50);
Assert.AreEqual(true, master.ReadCoil(1, 0));
Assert.AreEqual(false, master.ReadCoil(1, 1));
Assert.AreEqual(false, master.ReadCoil(1, 2));
Assert.AreEqual(true, master.ReadCoil(1, 3));
Assert.AreEqual(new bool[] { true, true }, master.ReadInputs(1, 64 + 2, 2));
Assert.AreEqual(new bool[] { true, false }, master.ReadInputs(1, 128 + 2, 2));
Assert.AreEqual(new bool[] { false, true }, master.ReadCoils(1, 6, 2));
Assert.AreEqual(new bool[] { true, false, false, true }, master.ReadCoils(1, 0, 4));
master.WriteCoils(1, 64, Bools(4, true)); //clear on latches
master.WriteCoils(1, 128, Bools(4, true)); //clear off latches
Assert.AreEqual(new bool[] { false, false }, master.ReadInputs(1, 64 + 2, 2));
Assert.AreEqual(new bool[] { false, false }, master.ReadInputs(1, 128 + 2, 2));
//analog
SetAnalog(master, 12, 0);
SetAnalog(master, 13, 0);
Assert.AreEqual(0, GetAnalog(master, 12));
Assert.AreEqual(0, GetAnalog(master, 13));
Thread.Sleep(50);
Assert.That(0f, Is.EqualTo(GetAnalog2(master, 8)).Within(0.1));
Assert.That(0f, Is.EqualTo(GetAnalog2(master, 9)).Within(0.1));
SetAnalog(master, 12, 5);
SetAnalog(master, 13, 10);
Assert.AreEqual(5, GetAnalog(master, 12));
Assert.AreEqual(10, GetAnalog(master, 13));
Thread.Sleep(50);
Assert.That(5f, Is.EqualTo(GetAnalog2(master, 8)).Within(0.1));
Assert.That(10f, Is.EqualTo(GetAnalog2(master, 9)).Within(0.1));
SetAnalog2(master, 12, -5);
SetAnalog2(master, 13, -10);
Assert.AreEqual(-5, GetAnalog(master, 12));
Assert.AreEqual(-10, GetAnalog(master, 13));
Thread.Sleep(50);
Assert.That(-5f, Is.EqualTo(GetAnalog2(master, 8)).Within(0.1));
Assert.That(-10f, Is.EqualTo(GetAnalog2(master, 9)).Within(0.1));
}
public static void SharedExceptionTest(ModbusMaster master)
{
master.ReadCoil(1, 2); //should except on empty model
}
