/// <summary>
/// This is basically the same example as the SaveNetworkData above, though
/// this time the data is stored as a part of the MIKE 1D setup in the
/// standard .m1dx file.
/// </summary>
/// <param name="vidaaFilepath">Path and name of the Vidaa example</param>
public static void SaveDoubleNetworkDataWithSetup(string vidaaFilepath)
{
{
// Creates a new Mike 1D controller and load the setup
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
IMike1DController controller = controllerFactory.OpenAndCreate(Connection.Create(vidaaFilepath), diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Loading errors, aborting");
}
// Create a NetworkData that can store a user defined type, and add some data at some locations
NetworkDataDouble myDoubleData = new NetworkDataDouble()
{
CanInterpolate = false
};
myDoubleData.AddValue(new Location("SonderAa", 1034), 1.034);
myDoubleData.AddValue(new Location("LindSkov", 2860), 2.86);
myDoubleData.AddValue("MyNodeId", -42);
// Set the NetworkData as additional data, using the string "UserData" as key
controller.Mike1DData.SetAdditionalData("UserData", myDoubleData);
// Saving the file again (same filename, new extension)
controller.Mike1DData.Connection.BridgeName = "m1dx";
controller.Mike1DData.Connection.FilePath.Extension = ".m1dx";
Mike1DBridge.Save(controller.Mike1DData);
controller.Finish();
}
{
// Load the setup again, changing the extension to .m1dx
FilePath vidaaFile = new FilePath(vidaaFilepath);
vidaaFile.Extension = ".m1dx";
// Load the setup
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
IMike1DController controller = controllerFactory.OpenAndCreate(Connection.Create(vidaaFile.Path), diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Loading errors, aborting");
}
// Get the additional data using the string "UserData" as key, which we know is a NetworkData with MyData
NetworkDataDouble myComplexData = (NetworkDataDouble)controller.Mike1DData.GetAdditionalData("UserData");
// Now we can extract our data again
double v1034;
bool ok1034 = myComplexData.GetValue(new Location("SonderAa", 1034), out v1034);
double v2860;
bool ok2860 = myComplexData.GetValue(new Location("LindSkov", 2860), out v2860);
double vNode;
bool okNode = myComplexData.GetValue("MyNodeId", out vNode);
controller.Finish();
}
}
/// <summary>
/// Using the MIKE 1D controller to run a simulation
/// <para>
/// The controller gives more control of the simulation.
/// It also pushes the responsibility of error reporting and
/// summary information to the user.
/// </para>
/// </summary>
/// <param name="setupFilepath">Path to setup file (.sim11, .mdb or .m1dx)</param>
public static void ControllerRun(string setupFilepath)
{
// The controller factory
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
IMike1DController controller = null;
// Try-catch to catch any unexpected exception or runtime exceptions.
try
{
// Diagnostics object receiving errors, warning and hints during
// load and initialize.
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
// creates a new Mike 1D controller and load the setup
controller = controllerFactory.OpenAndCreate(Connection.Create(setupFilepath), diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Loading errors, aborting");
}
// Now the MIKE 1D data is available
Mike1DData mike1DData = controller.Mike1DData;
// Validate setup, returns a new diagnostics object
IDiagnostics validated = controller.Validate();
if (validated.ErrorCountRecursive > 0)
{
throw new Exception("Validation errors, aborting");
}
// Initialize simulation
controller.Initialize(diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Initialization errors, aborting");
}
// Run the simulation
controller.Prepare();
controller.Run();
controller.Finish();
}
catch (Exception e)
{
// Write exception to log file
if (controllerFactory.LogFileWriter != null)
{
controllerFactory.LogFileWriter.ExceptionToLogFile(e);
}
// Call Finish, which should make sure to close down properly, and release any licences.
if (controller != null)
{
try { controller.Finish(); }
catch { }
}
// Rethrow exception
throw;
}
}
/// <summary>
/// Example of how to add a cross section after loading a complete
/// setup, and running the simulation with the new cross section
/// included. It is not necessary to save the modified cross sections
/// to file before running.
/// </summary>
/// <param name="setupFilepath">A .sim11 setup path</param>
public static void AddCrossSectionAndRun(string setupFilepath)
{
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
IMike1DController controller = null;
try
{
// creates a new Mike 1D controller and load the setup
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
controller = controllerFactory.OpenAndCreate(Connection.Create(setupFilepath), diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Loading errors, aborting");
}
// Add an additional cross section
AddCrossSection(controller.Mike1DData.CrossSections);
// Change the output file name, so we can compare results with/without change
controller.Mike1DData.ResultSpecifications[0].Connection.FilePath.FileNameWithoutExtension += "-csAdd";
IDiagnostics validated = controller.Validate();
if (validated.ErrorCountRecursive > 0)
{
throw new Exception("Validation errors, aborting");
}
// run the simulation with the new cross section included
controller.Initialize(diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Initialization errors, aborting");
}
controller.Prepare();
controller.Run();
controller.Finish();
}
catch (Exception e)
{
// Write exception to log file
if (controllerFactory.LogFileWriter != null)
{
controllerFactory.LogFileWriter.ExceptionToLogFile(e);
}
// Call Finish, which should make sure to close down properly, and release any licences.
if (controller != null)
{
try { controller.Finish(); }
catch { }
}
// Rethrow exception
throw;
}
}
public void UserStructureSaveData()
{
string setupFilePath = Path.Combine(ExampleBase.ExampleRoot, @"UnitFlow\UnitFlowStruc.sim11");
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
IMike1DController controller = controllerFactory.OpenAndCreate(Connection.Create(setupFilePath), diagnostics);
// Add custom assembly and type - required for the standalong engine to load it again.
controller.Mike1DData.CustomTypes.AssemblyFiles.Add(@"..\..\DHI.Mike1D.Examples\bin\Debug\DHI.Mike1D.Examples.dll");
controller.Mike1DData.CustomTypes.Add(typeof(MyStructure));
// Save to .m1dx file
controller.Mike1DData.Connection.FilePath.Extension = ".m1dx";
controller.Mike1DData.Connection.FilePath.FileNameWithoutExtension = "UnitFlowStruc-2";
controller.Mike1DData.Connection.BridgeName = "m1dx";
controller.Mike1DData.ResultSpecifications.ForEach(rs => rs.Connection.FilePath.FileNameWithoutExtension += "-2");
Mike1DBridge.Save(controller.Mike1DData);
}
/// <summary>
/// This is basically the same example as the SaveNetworkData above, though
/// this time the data is stored as a part of the MIKE 1D setup in the
/// standard .m1dx file.
/// <para>
/// This is ONLY recommended for advanced users and use:
/// The disadvantage of this approach is that the resulting .m1dx file can only be
/// read again by a similar approach, i.e. it WILL ONLY run using the default engine
/// when the custom assembly is available, hence it CAN NOT be read by others unless
/// they are also provided with the custom assembly.
/// </para>
/// </summary>
/// <param name="vidaaFilepath">Path and name of the Vidaa example</param>
/// <param name="customAssemblyFile"></param>
public static void SaveComplexNetworkDataWithSetup(string vidaaFilepath, string customAssemblyFile)
{
{
// Creates a new Mike 1D controller and load the setup
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
IMike1DController controller = controllerFactory.OpenAndCreate(Connection.Create(vidaaFilepath), diagnostics);
if (diagnostics.ErrorCountRecursive > 0)
{
throw new Exception("Loading errors, aborting");
}
// Create a NetworkData that can store a user defined type, and add some data at some locations
NetworkData <MyData> myComplexData = new NetworkData <MyData>()
{
CanInterpolate = false
};
myComplexData.AddValue(new Location("SonderAa", 1034), new MyData()
{
SValue = "SA", DValue = 1.034
});
myComplexData.AddValue(new Location("LindSkov", 2860), new MyData()
{
SValue = "LS", DValue = 2.86
});
myComplexData.AddValue("MyNodeId", new MyData()
{
SValue = "Node", DValue = -42
});
// Set the NetworkData as additional data, using the string "UserData" as key
controller.Mike1DData.SetAdditionalData("UserData", myComplexData);
controller.Mike1DData.SetAdditionalData("UserData2", new MyData()
{
SValue = "Upstream", DValue = 15.03
});
// Saving the file again (same filename, new extension)
controller.Mike1DData.Connection.BridgeName = "m1dx";
controller.Mike1DData.Connection.FilePath.Extension = ".m1dx";
// We need to add two custom types, in order to store data to .m1dx
// The types are found in the DHI.Mike1D.Examples.dll, which cannot be found by the MIKE 1D engine unless an explicit path is provided
// Make the path relative to the setup.
string relativeAssemblyFile = FilePath.GetRelativeFilePath(customAssemblyFile, Path.GetDirectoryName(Path.GetFullPath(vidaaFilepath)));
controller.Mike1DData.CustomTypes.AssemblyFiles.Add(relativeAssemblyFile);
controller.Mike1DData.CustomTypes.Add(myComplexData.GetType());
controller.Mike1DData.CustomTypes.Add(typeof(MyData));
Mike1DBridge.Save(controller.Mike1DData);
// Close any log files
controller.Finish();
}
{
// Load the setup again, changing the extension to .m1dx
FilePath vidaaFile = new FilePath(vidaaFilepath);
vidaaFile.Extension = ".m1dx";
Mike1DControllerFactory controllerFactory = new Mike1DControllerFactory();
Diagnostics diagnostics = new Diagnostics("My Diagnostics");
IMike1DController controller = controllerFactory.OpenAndCreate(Connection.Create(vidaaFile), diagnostics);
Mike1DData mike1DData = controller.Mike1DData;
// Get the additional data using the string "UserData" as key, which we know is a NetworkData with MyData
NetworkData <MyData> myComplexData = (NetworkData <MyData>)mike1DData.GetAdditionalData("UserData");
MyData myComplexData2 = (MyData)mike1DData.GetAdditionalData("UserData2");
// Now we can extract our data again
MyData v1034;
bool ok1034 = myComplexData.GetValue(new Location("SonderAa", 1034), out v1034);
MyData v2860;
bool ok2860 = myComplexData.GetValue(new Location("LindSkov", 2860), out v2860);
MyData vNode;
bool okNode = myComplexData.GetValue("MyNodeId", out vNode);
controller.Finish();
}
}