/// <summary>Draws the given Emoji character.</summary>
public void DrawEmoji(Glyph character, ref float left, Renderman renderer)
{
if (!character.Image.Loaded)
{
return;
}
BoxRegion screenRegion = renderer.CurrentRegion;
float top = renderer.TopOffset;
// It's an image (e.g. Emoji).
AtlasLocation locatedAt = RequireImage(character.Image);
if (locatedAt == null)
{
// It needs to be isolated. Big emoji image!
return;
}
if (CharacterProviders.FixHeight)
{
// Set the region:
screenRegion.Set(left, top, locatedAt.Width, locatedAt.Height);
}
else
{
screenRegion.Set(left, top, FontSize, FontSize);
}
if (screenRegion.Overlaps(renderer.ClippingBoundary))
{
// Ensure correct batch:
renderer.SetupBatch(this, locatedAt.Atlas, null);
// If the two overlap, this means it's actually visible.
MeshBlock block = Add(renderer);
// Set it's colour:
block.SetColour(renderer.ColorOverlay);
// And clip our meshblock to fit within boundary:
block.TextUV = null;
block.ImageUV = block.SetClipped(renderer.ClippingBoundary, screenRegion, renderer, RenderData.computedStyle.ZIndex, locatedAt, block.ImageUV);
block.Done(renderer.Transform);
}
left += (character.AdvanceWidth) + LetterSpacing;
if (character.Charcode == (int)' ')
{
left += WordSpacing;
}
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
// Get the top left inner corner (inside margin and border):
float width = box.PaddedWidth;
float height = box.PaddedHeight;
float top = box.Y + box.Border.Top;
float left = box.X + box.Border.Left;
// Is it clipped?
if (renderer.IsInvisible(left, top, width, height))
{
// Totally not visible.
return;
}
// Ensure we have a batch (doesn't change graphics or font thus both nulls):
renderer.SetupBatch(this, null, null);
// Get the transform:
Transformation transform = renderer.Transform;
for (int y = 0; y < 3; y++)
{
for (int x = 0; x < 3; x++)
{
// Add it:
MeshBlock block = Add(renderer);
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Set the colour - here we set it unevenly to trigger gradients.
// block.SetColour(BackingColour * renderer.ColorOverlay);
// BoxRegion clipZone=new BoxRegion(left,top,width,height);
// Set the verts too:
// block.SetClipped(renderer.ClippingBoundary,clipZone,renderer,box.ZIndex-0.006f);
block.Done(transform);
}
}
}
/// <summary>Draws an underline (or a strikethrough).</summary>
public virtual void DrawUnderline(Renderman renderer)
{
// Ensure we have a batch:
renderer.SetupBatch(this, null, null);
// And get our block ready:
MeshBlock block = Add(renderer);
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Set the colour:
block.SetColour(renderer.FontColour);
// Set the verts:
block.SetClipped(renderer.ClippingBoundary, renderer.CurrentRegion, renderer, renderer.TextDepth);
// Ok!
block.Done(renderer.Transform);
}
/// <summary>Draws a character with x-inverted UV's. Used for rendering e.g. "1 < 2" in right-to-left.</summary>
protected virtual void DrawInvertCharacter(ref float left, Renderman renderer)
{
BoxRegion screenRegion = renderer.CurrentRegion;
float top = renderer.TopOffset;
int index = renderer.CharacterIndex;
Glyph character = Characters[index];
if (character == null)
{
return;
}
if (Kerning != null)
{
left += Kerning[index] * FontSize;
}
// Get atlas location (if it has one):
AtlasLocation locatedAt = character.Location;
if (locatedAt != null)
{
// We're on the atlas!
float y = top + renderer.TextAscender - ((character.Height + character.MinY) * FontSize);
float scaleFactor = renderer.TextScaleFactor;
screenRegion.Set(left + (character.LeftSideBearing * FontSize), y, locatedAt.Width * scaleFactor, locatedAt.Height * scaleFactor);
if (screenRegion.Overlaps(renderer.ClippingBoundary))
{
// True if this character is visible.
// Ensure correct batch:
renderer.SetupBatch(this, null, locatedAt.Atlas);
MeshBlock block = Add(renderer);
block.SetColour(renderer.FontColour);
block.ApplyOutline();
// And clip our meshblock to fit within boundary:
// Clip our meshblock to fit within boundary:
if (Background != null && Isolated)
{
// Setup the batch material for this char:
Material imageMaterial = Background.Image.Contents.GetImageMaterial(renderer.CurrentShaderSet.Normal);
SetBatchMaterial(renderer, imageMaterial);
// Reapply text atlas:
renderer.CurrentBatch.SetFontAtlas(locatedAt.Atlas);
// Apply the image UV's (we're always isolated so these can tile by going out of range):
block.ImageUV = block.SetClipped(
renderer.ClippingBoundary,
screenRegion,
renderer,
RenderData.computedStyle.ZIndex,
Background.ImageLocation,
block.ImageUV
);
}
else
{
block.ImageUV = null;
}
UVBlock uvs = block.SetClipped(renderer.ClippingBoundary, screenRegion, renderer, RenderData.computedStyle.ZIndex, locatedAt, block.TextUV);
if (uvs.Shared)
{
uvs = new UVBlock(uvs);
}
// Invert along X:
float temp = uvs.MinX;
uvs.MinX = uvs.MaxX;
uvs.MaxX = temp;
// Assign to the block:
block.TextUV = uvs;
block.Done(renderer.Transform);
}
}
left += (character.AdvanceWidth * FontSize) + LetterSpacing;
if (character.Charcode == (int)' ')
{
left += WordSpacing;
}
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
if (Image == null || !Image.Loaded)
{
return;
}
if (Clipping == BackgroundClipping.Text)
{
return;
}
if (Image.Contents.Isolate || renderer.RenderMode == RenderMode.NoAtlas || Filtering != FilterMode.Point || ForcedIsolate)
{
// SPA is an animation format, so we need a custom texture atlas to deal with it.
// This is because the frames of any animation would quickly exhaust our global texture atlas.
// So to get a custom atlas, we must isolate this property.
Isolate();
}
else
{
// Reverse isolation, if we are isolated already:
Include();
}
// Get the full shape of the element:
float width;
float height;
float minX;
float minY;
if (renderer.ViewportBackground)
{
// Applying to whole background:
BoxRegion viewport = renderer.Viewport;
minY = (int)viewport.Y;
minX = (int)viewport.X;
width = (int)viewport.Width;
height = (int)viewport.Height;
renderer.ViewportBackground = false;
}
else
{
width = (int)(box.PaddedWidth);
height = (int)(box.PaddedHeight);
minY = (int)(box.Y + box.Border.Top);
minX = (int)(box.X + box.Border.Left);
}
if (width == 0 || height == 0)
{
if (Visible)
{
SetVisibility(false);
}
return;
}
// Tell the image that the box has likely changed - this allows it to redraw (e.g. SVGs):
float trueImageWidth;
float trueImageHeight;
Image.Contents.OnLayout(RenderData, box, out trueImageWidth, out trueImageHeight);
BoxRegion boundary = new BoxRegion(minX, minY, width, height);
if (!boundary.Overlaps(renderer.ClippingBoundary))
{
if (Visible)
{
SetVisibility(false);
}
return;
}
else if (!Visible)
{
// ImageLocation will allocate here if it's needed.
SetVisibility(true);
}
boundary.ClipBy(renderer.ClippingBoundary);
// Texture time - get it's location on that atlas:
AtlasLocation locatedAt = ImageLocation;
if (locatedAt == null)
{
// We're not using the atlas here.
if (!Isolated)
{
Isolate();
}
locatedAt = new AtlasLocation(trueImageWidth, trueImageHeight);
}
// Isolation is all done - safe to setup the batch now:
renderer.SetupBatch(this, locatedAt.Atlas, null);
// Great - Use locatedAt.Width/locatedAt.Height - this removes any risk of overflowing into some other image.
int imageCountX = 1;
int imageCountY = 1;
float imageWidth = trueImageWidth * RenderData.ValueScale;
float imageHeight = trueImageHeight * RenderData.ValueScale;
bool autoX = false;
bool autoY = false;
if (SizeX != null)
{
if (SizeX.IsAuto)
{
autoX = true;
}
else
{
imageWidth = SizeX.GetDecimal(RenderData, Css.Properties.BackgroundSize.GlobalPropertyX);
}
}
if (SizeY != null)
{
if (SizeY.IsAuto)
{
autoY = true;
}
else
{
imageHeight = SizeY.GetDecimal(RenderData, Css.Properties.BackgroundSize.GlobalPropertyY);
}
}
if (autoX)
{
imageWidth = imageHeight * trueImageWidth / trueImageHeight;
}
else if (autoY)
{
imageHeight = imageWidth * trueImageHeight / trueImageWidth;
}
// offsetX and offsetY are the images position offset from where it should be (e.g. x of -200 means it's 200px left)
// Apply the offset origin:
float offsetX = OffsetOriginX * (width - imageWidth);
float offsetY = OffsetOriginY * (height - imageHeight);
float offset;
// Resolve the offset values, if there is any:
if (OffsetX != null)
{
offset = OffsetX.GetDecimal(RenderData, ValueAxis.X);
if (OffsetOriginX == 1f)
{
offsetX -= offset;
}
else
{
offsetX += offset;
}
}
if (OffsetY != null)
{
offset = OffsetY.GetDecimal(RenderData, ValueAxis.Y);
if (OffsetOriginY == 1f)
{
offsetY -= offset;
}
else
{
offsetY += offset;
}
}
if (RepeatX)
{
// Get the rounded up number of images:
imageCountX = (int)Math.Ceiling(width / imageWidth);
if (offsetX != 0)
{
// If we have an offset, another image is introduced.
imageCountX++;
}
}
if (RepeatY)
{
// Get the rounded up number of images:
imageCountY = (int)Math.Ceiling(height / imageHeight);
if (offsetY != 0)
{
// If we have an offset, another image is introduced.
imageCountY++;
}
}
float blockX = minX + offsetX;
float blockY = minY + offsetY;
if (RepeatX && offsetX > 0)
{
// We're repeating and the image is offset by a +ve number.
// This means a small gap, OffsetX px wide, is open on this left side.
// So to fill it, we need to offset this first image by a much bigger number - the value imageWidth-OffsetX.
blockX -= (imageWidth - offsetX);
// This results in the first image having OffsetX pixels exposed in the box - this is what we want.
}
if (RepeatY && offsetY > 0)
{
// Similar thing to above:
blockY -= (imageHeight - offsetY);
}
BoxRegion screenRegion = new BoxRegion();
bool first = true;
float startX = blockX;
Color colour = renderer.ColorOverlay;
float zIndex = (RenderData.computedStyle.ZIndex - 0.003f);
Transformation transform = renderer.Transform;
for (int y = 0; y < imageCountY; y++)
{
for (int x = 0; x < imageCountX; x++)
{
// Draw at blockX/blockY.
screenRegion.Set(blockX, blockY, imageWidth, imageHeight);
if (screenRegion.Overlaps(boundary))
{
// If the two overlap, this means it's actually visible.
MeshBlock block = Add(renderer);
if (first)
{
first = false;
if (Isolated)
{
// Set current material:
SetBatchMaterial(renderer, Image.Contents.GetImageMaterial(renderer.CurrentShaderSet.Isolated));
}
}
// Set its colour:
block.SetColour(colour);
// And clip our meshblock to fit within boundary:
block.TextUV = null;
block.ImageUV = block.SetClipped(boundary, screenRegion, renderer, zIndex, locatedAt, block.ImageUV);
block.Done(transform);
}
blockX += imageWidth;
}
blockX = startX;
blockY += imageHeight;
}
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
// Dimensions:
float width = box.Width;
float height = box.Height;
if (Renderer == null)
{
// Create the FWUI now:
Renderer = new FlatWorldUI("#Internal-PowerUI-Raster-" + RasterID, (int)width, (int)height);
RasterID++;
if (Filter != null)
{
// Set source:
Filter.Set("source0", Renderer.Texture);
}
// Grab the output texture:
Output = Renderer.Texture;
}
// Does the given renderer belong to the worldUI?
if (renderer == Renderer.Renderer)
{
// Yes! We're actually drawing the element.
return;
}
// Next we'll draw the rastered image.
// It's essentially just the output from the renderer.
// Get the top left inner corner (inside margin and border):
float top = box.Y;
float left = box.X;
// Update the FlatWorldUI next:
UpdateRenderer(box, width, height);
// Always isolated:
Isolate();
// Make sure the renderer stalls and doesn't draw anything else of this element or its kids.
renderer.StallStatus = 2;
// Setup boundary:
BoxRegion boundary = new BoxRegion(left, top, width, height);
if (!boundary.Overlaps(renderer.ClippingBoundary))
{
if (Visible)
{
SetVisibility(false);
}
return;
}
else if (!Visible)
{
// ImageLocation will allocate here if it's needed.
SetVisibility(true);
}
// Texture time - get its location on that atlas:
if (LocatedAt == null)
{
LocatedAt = new AtlasLocation(width, height);
}
else
{
// Dimensions changed?
int w = (int)width;
int h = (int)height;
if (LocatedAt.Width != w || LocatedAt.Height != h)
{
// Update it:
LocatedAt.UpdateFixed(width, height);
}
}
boundary.ClipBy(renderer.ClippingBoundary);
// Ensure we have a batch:
renderer.SetupBatch(this, null, null);
if (Material == null)
{
// Create the material now using the isolated shader:
Material = new Material(renderer.CurrentShaderSet.Isolated);
// Hook up the output:
Material.SetTexture("_MainTex", Output);
}
// Allocate the block:
MeshBlock block = Add(renderer);
// Set current material:
SetBatchMaterial(renderer, Material);
// Set the (overlay) colour:
block.SetColour(renderer.ColorOverlay);
block.TextUV = null;
// Z-index (same as a background-image):
float zIndex = (RenderData.computedStyle.ZIndex - 0.003f);
BoxRegion screenRegion = new BoxRegion();
screenRegion.Set(left, top, width, height);
// Setup the block:
block.ImageUV = block.SetClipped(boundary, screenRegion, renderer, zIndex, LocatedAt, block.ImageUV);
// Flush it:
block.Done(renderer.Transform);
}
/// <summary>Draws a character and advances the pen onwards.</summary>
protected virtual void DrawCharacter(ref float left, Renderman renderer)
{
BoxRegion screenRegion = renderer.CurrentRegion;
Color fontColour = renderer.FontColour;
float top = renderer.TopOffset;
int index = renderer.CharacterIndex;
Glyph character = Text.Characters[index];
if (character == null)
{
return;
}
if (Text.Kerning != null)
{
left += Text.Kerning[index] * Text.FontSize;
}
AtlasLocation locatedAt;
if (character.Image != null)
{
DrawEmoji(character, ref left, renderer);
return;
}
// Get atlas location:
locatedAt = character.Location;
// Does this character have a visual glyph? E.g. a space does not.
if (locatedAt != null)
{
float y = top + renderer.TextAscender - ((character.Height + character.MinY) * Text.FontSize);
float scaleFactor = renderer.TextScaleFactor;
screenRegion.Set(left + (character.LeftSideBearing * Text.FontSize), y, locatedAt.Width * scaleFactor, locatedAt.Height * scaleFactor);
if (screenRegion.Overlaps(renderer.ClippingBoundary))
{
// True if this character is visible.
// Ensure correct batch:
renderer.SetupBatch(this, null, locatedAt.Atlas);
MeshBlock block = Add(renderer);
block.SetColour(fontColour);
block.ApplyOutline();
// And clip our meshblock to fit within boundary:
block.ImageUV = null;
block.TextUV = block.SetClipped(renderer.ClippingBoundary, screenRegion, renderer, RenderData.computedStyle.ZIndex, locatedAt, block.TextUV);
block.Done(renderer.Transform);
}
}
left += (character.AdvanceWidth * Text.FontSize) + Text.LetterSpacing;
if (character.Charcode == (int)' ')
{
left += Text.WordSpacing;
}
}
/// <summary>Draws a character with x-inverted UV's. Used for rendering e.g. "1 < 2" in right-to-left.</summary>
protected virtual void DrawInvertCharacter(ref float left, Renderman renderer)
{
BoxRegion screenRegion = renderer.CurrentRegion;
float top = renderer.TopOffset;
int index = renderer.CharacterIndex;
Glyph character = Text.Characters[index];
if (character == null)
{
return;
}
if (Text.Kerning != null)
{
left += Text.Kerning[index] * Text.FontSize;
}
// Get atlas location (if it has one):
AtlasLocation locatedAt = character.Location;
if (locatedAt != null)
{
// We're on the atlas!
float y = top + renderer.TextAscender - ((character.Height + character.MinY) * Text.FontSize);
float scaleFactor = renderer.TextScaleFactor;
screenRegion.Set(left + (character.LeftSideBearing * Text.FontSize), y, locatedAt.Width * scaleFactor, locatedAt.Height * scaleFactor);
if (screenRegion.Overlaps(renderer.ClippingBoundary))
{
// True if this character is visible.
// Ensure correct batch:
renderer.SetupBatch(this, null, locatedAt.Atlas);
MeshBlock block = Add(renderer);
block.SetColour(renderer.FontColour);
block.ApplyOutline();
// And clip our meshblock to fit within boundary:
block.ImageUV = null;
UVBlock uvs = block.SetClipped(renderer.ClippingBoundary, screenRegion, renderer, RenderData.computedStyle.ZIndex, locatedAt, block.TextUV);
if (uvs.Shared)
{
uvs = new UVBlock(uvs);
}
// Invert along X:
float temp = uvs.MinX;
uvs.MinX = uvs.MaxX;
uvs.MaxX = temp;
// Assign to the block:
block.TextUV = uvs;
block.Done(renderer.Transform);
}
}
left += (character.AdvanceWidth * Text.FontSize) + Text.LetterSpacing;
if (character.Charcode == (int)' ')
{
left += Text.WordSpacing;
}
}
public void Render(LayoutBox box, Renderman renderer, float cornerX, float cornerY)
{
if (OuterArc == null)
{
RecomputeArcs(box.Border);
}
else if (InnerArc == null)
{
RecomputeInnerArc(box.Border);
}
// Get the z-Index:
float zIndex = RoundCorners.Computed.MaxZIndex + 0.006f;
// Figure out where half way is (divide by 2):
int halfway = (BlocksRequired >> 1);
Color colour = Colour;
// Grab the clipping boundary:
BoxRegion clip = renderer.ClippingBoundary;
// Make it relative to the corners location:
float minClipX = clip.X - cornerX;
float minClipY = clip.Y - cornerY;
float maxClipX = clip.MaxX - cornerX;
float maxClipY = clip.MaxY - cornerY;
// For each block..
for (int i = 0; i < BlocksRequired; i++)
{
// Read the outer arc:
Vector2 outerPointA = OuterArc[i];
// Figure out the bounding box (constant for a particular block).
float minX = outerPointA.x;
float maxX = minX;
float minY = outerPointA.y;
float maxY = minY;
Vector2 outerPointB = OuterArc[i + 1];
// Update the bounding box:
if (outerPointB.x < minX)
{
minX = outerPointB.x;
}
else if (outerPointB.x > maxX)
{
maxX = outerPointB.x;
}
if (outerPointB.y < minY)
{
minY = outerPointB.y;
}
else if (outerPointB.y > maxY)
{
maxY = outerPointB.y;
}
// Line segment A->B on the "outer" arc.
// Read the inner arc:
Vector2 innerPointA = InnerArc[i];
// Update the bounding box:
if (innerPointA.x < minX)
{
minX = innerPointA.x;
}
else if (innerPointA.x > maxX)
{
maxX = innerPointA.x;
}
if (innerPointA.y < minY)
{
minY = innerPointA.y;
}
else if (innerPointA.y > maxY)
{
maxY = innerPointA.y;
}
Vector2 innerPointB = InnerArc[i + 1];
// Update the bounding box:
if (innerPointB.x < minX)
{
minX = innerPointB.x;
}
else if (innerPointB.x > maxX)
{
maxX = innerPointB.x;
}
if (innerPointB.y < minY)
{
minY = innerPointB.y;
}
else if (innerPointB.y > maxY)
{
maxY = innerPointB.y;
}
// How does our bounding box compare to the clipping region?
if (maxX < minClipX)
{
continue;
}
else if (minX > maxClipX)
{
continue;
}
if (maxY < minClipY)
{
continue;
}
else if (minY > maxClipY)
{
continue;
}
// Line segment A->B on the "inner" arc.
// Get a block:
MeshBlock block = Border.Add(renderer);
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Get the border colour:
if (i == halfway)
{
// Get the next colour:
if (Border.BaseColour != null && Border.BaseColour.Count != 1)
{
colour = Border.BaseColour[ToIndex].GetColour(Border.RenderData, Css.Properties.BorderColor.GlobalProperty) * renderer.ColorOverlay;
}
}
// Set the border colour:
block.SetColour(colour);
// Apply the block region:
block.VertexTopLeft = renderer.PixelToWorldUnit(cornerX + outerPointA.x, cornerY + outerPointA.y, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(cornerX + outerPointB.x, cornerY + outerPointB.y, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(cornerX + innerPointA.x, cornerY + innerPointA.y, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(cornerX + innerPointB.x, cornerY + innerPointB.y, zIndex);
block.Done(renderer.Transform);
}
}
/// <summary>Renders the inverse of this corner for the border.</summary>
public void RenderInverse(LayoutBox box, Renderman renderer, float cornerX, float cornerY)
{
float scale = RoundCorners.Computed.RenderData.ValueScale;
if (scale != ValueScale)
{
// Value scale has changed - reset the radius:
Radius = Radius * scale / ValueScale;
ValueScale = scale;
}
if (OuterArc == null)
{
RecomputeArcs(box.Border);
}
else if (InnerArc == null)
{
RecomputeInnerArc(box.Border);
}
// Get the z-Index:
float zIndex = RoundCorners.Computed.MaxZIndex + 0.004f;
// Grab the size of the outer arc array:
int arcSize = OuterArc.Length;
int currentIndex = 0;
// Resolve the corner:
Vector3 corner = renderer.PixelToWorldUnit(cornerX, cornerY, zIndex);
// Ensure a batch is available:
renderer.SetupBatch(InverseBorder, null, null);
// For each inverse block:
for (int i = 0; i < InverseBlocksRequired; i++)
{
// Get a block:
MeshBlock block = InverseBorder.Add(renderer);
// Set the clear colour:
block.SetColour(Color.clear);
// Always going to be space to sample two. Sample the first:
Vector2 outerPoint = InnerArc[currentIndex];
// Apply the triangle:
block.VertexTopRight = corner;
// Apply the first:
block.VertexTopLeft = renderer.PixelToWorldUnit(cornerX + outerPoint.x, cornerY + outerPoint.y, zIndex);
// Sample the second:
outerPoint = InnerArc[currentIndex + 1];
// Apply the second:
block.VertexBottomLeft = renderer.PixelToWorldUnit(cornerX + outerPoint.x, cornerY + outerPoint.y, zIndex);
if ((currentIndex + 2) >= arcSize)
{
// Match the previous vertex:
block.VertexBottomRight = block.VertexBottomLeft;
}
else
{
// Grab the next point along:
outerPoint = InnerArc[currentIndex + 2];
// Resolve and apply the third:
block.VertexBottomRight = renderer.PixelToWorldUnit(cornerX + outerPoint.x, cornerY + outerPoint.y, zIndex);
}
block.Done(renderer.Transform);
// Move index along:
currentIndex += 2;
}
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
// Does the boxes text region overlap our selected range?
if (box.TextEnd <= StartIndex || EndIndex <= box.TextStart)
{
return;
}
// It overlaps! We need to figure out which section we're selecting (and how large it is).
// Get the top left inner corner (inside margin and border):
// Assume we've selected the whole thing; we remove from the start and remove from the end if needed.
float width = box.PaddedWidth;
float height = box.PaddedHeight;
float top = box.Y + box.Border.Top;
float left = box.X + box.Border.Left;
float fs = Text.FontSize;
// If the selected indices totally contain the box..
if (StartIndex > box.TextStart)
{
// Trim the start. We need to chop off the width of these characters.
float characterWidth = 0f;
int max = StartIndex;
if (max > Text.Characters.Length)
{
max = Text.Characters.Length;
}
for (int i = box.TextStart; i < max; i++)
{
InfiniText.Glyph character = Text.Characters[i];
if (character == null)
{
continue;
}
// Advance over the glyph:
if (Text.Kerning != null)
{
characterWidth += Text.Kerning[i] * fs;
}
characterWidth += (character.AdvanceWidth * fs) + Text.LetterSpacing;
if (character.Charcode == (int)' ')
{
characterWidth += Text.WordSpacing;
}
}
// Chop it off:
left += characterWidth;
width -= characterWidth;
}
if (EndIndex < box.TextEnd)
{
// Trim the end. We need to chop off the width of these characters.
float characterWidth = 0f;
int max = box.TextEnd;
if (max > Text.Characters.Length)
{
max = Text.Characters.Length;
}
for (int i = EndIndex; i < max; i++)
{
InfiniText.Glyph character = Text.Characters[i];
if (character == null)
{
continue;
}
// Advance over the glyph:
if (Text.Kerning != null)
{
characterWidth += Text.Kerning[i] * fs;
}
characterWidth += (character.AdvanceWidth * fs) + Text.LetterSpacing;
if (character.Charcode == (int)' ')
{
characterWidth += Text.WordSpacing;
}
}
// Chop it off:
width -= characterWidth;
}
// Is it clipped?
if (renderer.IsInvisible(left, top, width, height))
{
// Totally not visible.
return;
}
// Ensure we have a batch (doesn't change graphics or font thus both nulls):
renderer.SetupBatch(this, null, null);
// Allocate the block:
MeshBlock block = Add(renderer);
// Using firstblock as our block here.
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Set the colour:
block.SetColour(BaseColour);
// And finally sort out the verts:
block.SetClipped(renderer.ClippingBoundary, new BoxRegion(left, top, width, height), renderer, RenderData.computedStyle.ZIndex - 0.004f);
// Flush it:
block.Done(renderer.Transform);
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
float width;
float height;
float top;
float left;
bool clip = true;
if (renderer.ViewportBackground)
{
// Applying to whole background:
BoxRegion viewport = renderer.Viewport;
top = viewport.Y;
left = viewport.X;
width = viewport.Width;
height = viewport.Height;
renderer.ViewportBackground = false;
clip = false;
}
else
{
// Get the top left inner corner (inside margin and border):
width = box.PaddedWidth;
height = box.PaddedHeight;
top = box.Y + box.Border.Top;
left = box.X + box.Border.Left;
// Is it clipped?
if (renderer.IsInvisible(left, top, width, height))
{
// Totally not visible.
return;
}
}
// Ensure we have a batch (doesn't change graphics or font thus both nulls):
renderer.SetupBatch(this, null, null);
// Allocate the block:
MeshBlock block = Add(renderer);
// Using firstblock as our block here.
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Set the (overlay) colour:
block.SetColour(BaseColour * renderer.ColorOverlay);
// And finally sort out the verts:
if (clip)
{
block.SetClipped(renderer.ClippingBoundary, new BoxRegion(left, top, width, height), renderer, RenderData.computedStyle.ZIndex - 0.006f);
}
else
{
block.ApplyVertices(new BoxRegion(left, top, width, height), renderer, RenderData.computedStyle.ZIndex - 0.006f);
}
// Flush it:
block.Done(renderer.Transform);
}
internal override void Layout(LayoutBox box, Renderman renderer)
{
if (Corners != null)
{
Corners.PreLayout();
}
ComputedStyle computed = RenderData.computedStyle;
// Find the zIndex:
// NB: At same depth as BGColour - right at the back.
float zIndex = (computed.ZIndex - 0.006f);
// Get the co-ord of the top edge:
float top = box.Y;
float left = box.X;
// Get the border widths:
BoxStyle width = box.Border;
// Move top by the widths:
top += width.Top;
left += width.Left;
// And the dimensions of the lines:
float boxWidth = box.PaddedWidth;
float boxHeight = box.PaddedHeight;
// Get the other dimensions:
float topY = top - width.Top;
float right = left + boxWidth;
float rightX = right + width.Right;
float bottom = top + boxHeight;
float bottomY = bottom + width.Bottom;
float leftX = left - width.Left;
int segment = renderer.Segment;
Transformation transform = renderer.Transform;
BoxRegion screenRegion = new BoxRegion();
// Get the default colour - that's the same as the text colour:
Color colour = Color.black;
// Is the border multicoloured?
bool multiColour = false;
// Does this border have a colour?
if (BaseColour == null)
{
// Grab the text colour if there is one:
if (RenderData.Text != null)
{
// It's the same as the font colour:
colour = RenderData.Text.BaseColour * renderer.ColorOverlay;
}
else
{
// Nope - We need to set alpha:
colour.a = renderer.ColorOverlay.a;
}
}
else if (BaseColour.Count == 1)
{
colour = BaseColour[0].GetColour(RenderData, Css.Properties.BorderColor.GlobalProperty) * renderer.ColorOverlay;
}
else
{
multiColour = true;
}
// Handle border-radius:
if (Corners != null)
{
for (int i = 0; i < 4; i++)
{
if (multiColour)
{
colour = BaseColour[i].GetColour(RenderData, Css.Properties.BorderColor.GlobalProperty) * renderer.ColorOverlay;
}
Corners.Layout(colour, box, renderer, i);
}
}
// Get clipper:
BoxRegion clip = renderer.ClippingBoundary;
float origLeftX = leftX;
float origTopY = topY;
float origBottomY = bottomY;
float origRightX = rightX;
// top and topY:
if (top < clip.Y)
{
top = clip.Y;
}
else if (top > clip.MaxY)
{
top = clip.MaxY;
}
if (topY < clip.Y)
{
topY = clip.Y;
}
// bottom and bottomY:
if (bottom > clip.MaxY)
{
bottom = clip.MaxY;
}
else if (bottom < clip.Y)
{
bottom = clip.Y;
}
if (bottomY > clip.MaxY)
{
bottomY = clip.MaxY;
}
// right and rightX:
if (right < clip.X)
{
right = clip.X;
}
else if (right > clip.MaxX)
{
right = clip.MaxX;
}
// rightX vs clip.MaxX
if (rightX > clip.MaxX)
{
rightX = clip.MaxX;
}
// left and leftX:
if (left < clip.X)
{
left = clip.X;
}
else if (left > clip.MaxX)
{
left = clip.MaxX;
}
if (leftX < clip.X)
{
leftX = clip.X;
}
float cornerPointA;
float cornerPointB;
for (int i = 0; i < 4; i++)
{
// Does this border have multiple colours?
if (multiColour)
{
colour = BaseColour[i].GetColour(RenderData, Css.Properties.BorderColor.GlobalProperty) * renderer.ColorOverlay;
}
// Add to region:
switch (i)
{
case 0:
// Top.
screenRegion.SetPoints(leftX, topY, rightX, top);
break;
case 1:
// Right.
// We only draw the right border if 'segment' includes 'end'
if ((segment & LineBoxSegment.End) == 0)
{
goto NextLine;
}
screenRegion.SetPoints(right, topY, rightX, bottomY);
break;
case 2:
// Bottom.
screenRegion.SetPoints(leftX, bottom, rightX, bottomY);
break;
case 3:
// Left.
// Similarly, we only draw left if segment includes 'start':
if ((segment & LineBoxSegment.Start) == 0)
{
goto NextLine;
}
screenRegion.SetPoints(leftX, topY, left, bottomY);
break;
}
if (screenRegion.Overlaps(clip))
{
// It's visible.
// Ensure we have a batch (doesn't change graphics or font textures, thus both null):
renderer.SetupBatch(this, null, null);
// And get our block ready:
MeshBlock block = Add(renderer);
// Set the UV to that of the solid block colour pixel:
block.SetSolidColourUV();
// Set the border colour:
block.SetColour(colour);
// Apply verts:
switch (i)
{
case 0:
// Top:
if (Corners == null)
{
block.VertexTopLeft = renderer.PixelToWorldUnit(leftX, topY, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(rightX, topY, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(left, top, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(right, top, zIndex);
}
else
{
// Top left/right corners:
cornerPointA = origLeftX + Corners.TopLeftRadius;
cornerPointB = origRightX - Corners.TopRightRadius;
if (cornerPointA < clip.X)
{
cornerPointA = clip.X;
}
if (cornerPointB > clip.MaxX)
{
cornerPointB = clip.MaxX;
}
// Note that we use leftX/rightX for all of them.
// That's because the corner has a 'straight' edge.
block.VertexTopLeft = renderer.PixelToWorldUnit(cornerPointA, topY, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(cornerPointB, topY, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(cornerPointA, top, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(cornerPointB, top, zIndex);
}
break;
case 1:
// Right:
if (Corners == null)
{
block.VertexTopLeft = renderer.PixelToWorldUnit(right, top, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(rightX, topY, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(right, bottom, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(rightX, bottomY, zIndex);
}
else
{
// Top right/ bottom right corners:
cornerPointA = origTopY + Corners.TopRightRadius;
cornerPointB = origBottomY - Corners.BottomRightRadius;
if (cornerPointA < clip.Y)
{
cornerPointA = clip.Y;
}
if (cornerPointB > clip.MaxY)
{
cornerPointB = clip.MaxY;
}
// Note that we use topY/bottomY for all of them.
block.VertexTopLeft = renderer.PixelToWorldUnit(right, cornerPointA, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(rightX, cornerPointA, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(right, cornerPointB, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(rightX, cornerPointB, zIndex);
}
break;
case 2:
// Bottom:
if (Corners == null)
{
block.VertexTopLeft = renderer.PixelToWorldUnit(left, bottom, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(right, bottom, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(leftX, bottomY, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(rightX, bottomY, zIndex);
}
else
{
// Bottom left/ bottom right corners:
// Note that we use leftX/rightX for all of them.
cornerPointA = origLeftX + Corners.BottomLeftRadius;
cornerPointB = origRightX - Corners.BottomRightRadius;
if (cornerPointA < clip.X)
{
cornerPointA = clip.X;
}
if (cornerPointB > clip.MaxX)
{
cornerPointB = clip.MaxX;
}
block.VertexTopLeft = renderer.PixelToWorldUnit(cornerPointA, bottom, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(cornerPointB, bottom, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(cornerPointA, bottomY, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(cornerPointB, bottomY, zIndex);
}
break;
case 3:
// Left:
if (Corners == null)
{
block.VertexTopLeft = renderer.PixelToWorldUnit(leftX, topY, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(left, top, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(leftX, bottomY, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(left, bottom, zIndex);
}
else
{
// Top right/ bottom right corners:
cornerPointA = origTopY + Corners.TopLeftRadius;
cornerPointB = origBottomY + width.Bottom - Corners.BottomLeftRadius;
if (cornerPointA < clip.Y)
{
cornerPointA = clip.Y;
}
if (cornerPointB > clip.MaxY)
{
cornerPointB = clip.MaxY;
}
block.VertexTopLeft = renderer.PixelToWorldUnit(leftX, cornerPointA, zIndex);
block.VertexTopRight = renderer.PixelToWorldUnit(left, cornerPointA, zIndex);
block.VertexBottomLeft = renderer.PixelToWorldUnit(leftX, cornerPointB, zIndex);
block.VertexBottomRight = renderer.PixelToWorldUnit(left, cornerPointB, zIndex);
}
break;
}
// Done!
block.Done(transform);
}
NextLine:
continue;
}
}
