internal void PlaceModule()
{
ComponentOccurrence topOccurrence;
if (AssemblyOccurrenceObject.Binder.GetObjectFromTrace <ComponentOccurrence>(out topOccurrence))
{
topOccurrence.Adaptive = true;
PersistenceManager.ActiveAssemblyDoc.Update2(true);
topOccurrence.Adaptive = false;
if (topOccurrence.DefinitionDocumentType == DocumentTypeEnum.kAssemblyDocumentObject)
{
var doc = (AssemblyDocument)topOccurrence.Definition.Document;
doc.Save2();
}
else if (topOccurrence.DefinitionDocumentType == DocumentTypeEnum.kPartDocumentObject)
{
var doc = (PartDocument)topOccurrence.Definition.Document;
doc.Save2();
}
}
else
{
AssemblyComponentDefinition assemblyCompDef = PersistenceManager.ActiveAssemblyDoc.ComponentDefinition;
topOccurrence = assemblyCompDef.Occurrences.Add(ModuleAssemblyPath, TransformationMatrix);
ComponentOccurrencesEnumerator topOccSubs = topOccurrence.SubOccurrences;
int topOccSubsCount = topOccSubs.Count;
ComponentOccurrence layoutOcc = null;
ComponentOccurrence frameOcc = null;
for (int i = 0; i < topOccSubsCount; i++)
{
ComponentOccurrence currentSub = topOccSubs[i + 1];
//This is by convention. Possible better alternative is to have this be
//explicitly set in the user interface.
if (currentSub.Name == "Template Layout:1")
{
layoutOcc = currentSub;
LayoutComponentDefinition = (PartComponentDefinition)layoutOcc.Definition;
}
//What did I do this for? I think for old flea flicker parameter updating.
if (currentSub.Name == "Frame0001:1")
{
frameOcc = currentSub;
FrameComponentDefinition = (AssemblyComponentDefinition)frameOcc.Definition;
}
else
{
TopOccurrences.Add(currentSub);
}
}
int workPointCount = LayoutComponentDefinition.WorkPoints.Count;
for (int j = 0; j < workPointCount; j++)
//TODO Need to put logic in that test a layout file for derivedparametertables collection.Count != 0
//then do the copy of the layout file, get the layout file and swap out the document descriptor IN APPRENTICE.
{
WorkPoint currentWP;
currentWP = LayoutComponentDefinition.WorkPoints[j + 1];
TargetWorkPoints.Add(currentWP);
object currentWPProxyObject;
WorkPointProxy currentWPProxy;
layoutOcc.CreateGeometryProxy(currentWP, out currentWPProxyObject);
currentWPProxy = (WorkPointProxy)currentWPProxyObject;
TargetWorkPointProxies.Add(currentWPProxy);
}
//TODO Fix this to be more intellegent. What if assembly had two planes (rooms etc.).
WorkPlane targetWorkPlane;
if (LayoutComponentDefinition.WorkPlanes.Count > 3)
{
targetWorkPlane = (WorkPlane)LayoutComponentDefinition.WorkPlanes[4];
object wPlaneProxyObject;
layoutOcc.CreateGeometryProxy(targetWorkPlane, out wPlaneProxyObject);
TargetWorkPlaneProxy = (WorkPlaneProxy)wPlaneProxyObject;
targetWorkPlane.Visible = false;
}
//Workplane constraints needed or not?
//Make sure the target assembly's layout is adaptive.
layoutOcc.Adaptive = true;
PersistenceManager.ActiveAssemblyDoc.ComponentDefinition.Constraints.AddMateConstraint(TargetWorkPlaneProxy, LayoutWorkPlaneProxy, 0);
if (FirstTime == true)
{
for (int f = 0; f < PointObjects.Count; f++)
{
//TODO this is uncertain. It changes from test to test, need to get better handle on the indexing of points.
PersistenceManager.ActiveAssemblyDoc
.ComponentDefinition
.Constraints
.AddMateConstraint(TargetWorkPointProxies[f + 1], LayoutWorkPointProxies[f], 0);
}
topOccurrence.Adaptive = true;
PersistenceManager.ActiveAssemblyDoc.Update2(true);
topOccurrence.Adaptive = false;
//layoutOcc.Visible = false;
}
else
{
for (int f = 0; f < PointObjects.Count; f++)
{
//TODO this is uncertain. It changes from test to test, need to get better handle on the indexing of points.
MateConstraint mateConstraint = PersistenceManager.ActiveAssemblyDoc
.ComponentDefinition
.Constraints
.AddMateConstraint(TargetWorkPointProxies[f + 1], LayoutWorkPointProxies[f], 0);
if (f > 0)
{
//These mate constraints will fail out in space because of double accuracy issues unless they are relaxed some.
mateConstraint.ConstraintLimits.MaximumEnabled = true;
mateConstraint.ConstraintLimits.Maximum.Expression = ".5 in";
}
}
//layoutOcc.Visible = false;
}
AssemblyOccurrenceObject.Binder.SetObjectForTrace <ComponentOccurrence>(topOccurrence, ModuleUtilities.ReferenceKeysSorter);
if (topOccurrence.DefinitionDocumentType == DocumentTypeEnum.kAssemblyDocumentObject)
{
var doc = (AssemblyDocument)topOccurrence.Definition.Document;
doc.Save2();
}
else if (topOccurrence.DefinitionDocumentType == DocumentTypeEnum.kPartDocumentObject)
{
var doc = (PartDocument)topOccurrence.Definition.Document;
doc.Save2();
}
}
}
private void button1_Click(object sender, EventArgs e)
{
try
{
this.Hide();
double h = 1, w = 1;
if (m_Asm != null)
{
CommandManager cmdMgr = invApp.CommandManager;
string txt = "";
//input = cmdMgr.UserInputEvents;
intEvts = cmdMgr.CreateInteractionEvents();
intEvts.InteractionDisabled = false;
sel = intEvts.SelectEvents;
sel.AddSelectionFilter(SelectionFilterEnum.kPartFaceFilter);
sel.OnSelect += new SelectEventsSink_OnSelectEventHandler(select);
mouse = intEvts.MouseEvents;
mouse.OnMouseClick += new MouseEventsSink_OnMouseClickEventHandler(selPt);
intEvts.Start();
intEvts.StatusBarText = "Выберите поверхность:";
//input.OnSelect += new UserInputEventsSink_OnSelectEventHandler(select);
//face = (Face)cmdMgr.Pick(SelectionFilterEnum.kPartFaceFilter, "Выберите поверхность:");
//input.OnSelect -= new UserInputEventsSink_OnSelectEventHandler(select);
flag = true;
while (flag)
{
invApp.UserInterfaceManager.DoEvents();
}
intEvts.Stop();
sel.OnSelect -= new SelectEventsSink_OnSelectEventHandler(select);
intEvts.MouseEvents.OnMouseClick -= new MouseEventsSink_OnMouseClickEventHandler(selPt);
List <string> tmp = new List <string>();
string name = comboBox1.Text;
m_Doc = (PartDocument)invApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject, CreateVisible: false);
m_Doc.ComponentDefinition.BOMStructure = BOMStructureEnum.kPurchasedBOMStructure;
m_Doc.UnitsOfMeasure.LengthUnits = UnitsTypeEnum.kMillimeterLengthUnits;
string filename = "";
for (int i = 0; i < attrXML.Count; i++)
{
if (attrXML[i].StartsWith("Name=" + name))
{
tmp.Add(attrXML[i]);
tmp.Add(valXML[i]);
i++;
while (i < attrXML.Count && attrXML[i].StartsWith("RowHeight="))
{
tmp.Add(attrXML[i]);
tmp.Add(valXML[i]);
i++;
}
break;
}
}
string nameStricker = "";
string strTmp = tbl.substring(tmp[0], "PartNumber=");
nameStricker = strTmp;
if (strTmp != "")
{
m_Doc.PropertySets[3][2].Value = strTmp; filename += strTmp;
}
strTmp = tbl.substring(tmp[0], "Description=");
if (strTmp != "")
{
m_Doc.PropertySets[3][14].Value = strTmp;
filename += (filename == "") ? strTmp : "-" + strTmp;
}
Func <string, double> conv = s =>
{
char rep = (separator == ',') ? '.' : ',';
return((s.IndexOf(separator) != -1) ? Convert.ToDouble(s) : Convert.ToDouble(s.Replace(rep, separator)));
};
strTmp = tbl.substring(tmp[0], "Height=");
if (strTmp != "")
{
h = conv(strTmp);
}
strTmp = tbl.substring(tmp[0], "Width=");
if (strTmp != "")
{
w = conv(strTmp);
}
strTmp = tbl.substring(tmp[0], "txt=");
if (strTmp != "")
{
txt = strTmp;
}
strTmp = tbl.substring(tmp[0], "Sort=");
if (strTmp != "")
{
m_Doc.PropertySets[1][4].Value = strTmp;
}
strTmp = tbl.substring(tmp[0], "Note=");
if (strTmp != "")
{
m_Doc.PropertySets[1][5].Value = strTmp;
}
strTmp = tbl.substring(tmp[0], "Triangle=");
if (strTmp == "False")
{
triangle = false;
}
else
{
triangle = true;
}
strTmp = tbl.substring(tmp[0], "Offset1=");
if (strTmp != "")
{
offset1 = conv(strTmp) / 10;
}
strTmp = tbl.substring(tmp[0], "Offset2=");
if (strTmp != "")
{
offset2 = conv(strTmp) / 10;
}
strTmp = tbl.substring(tmp[0], "Mirror=");
if (strTmp != "")
{
mirror = true;
}
if (face.SurfaceType == SurfaceTypeEnum.kPlaneSurface)
{
filename += "-" + w.ToString() + "x" + h.ToString();
if (!System.IO.File.Exists(path(m_Asm.FullFileName) + filename + ".ipt"))
{
Plane plane = (Plane)face.Geometry;
vecZ = plane.Normal;
if (!triangle)
{
planarSticker(ref m_Doc, h, w, txt);
}
else
{
triangleSticker(ref m_Doc, h, w, txt);
}
}
}
else if (face.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
R = Math.Round(((Cylinder)face.Geometry).Radius, 2);
filename += "-" + w.ToString() + "x" + h.ToString() + "x" + (R * 10).ToString();
if (!System.IO.File.Exists(path(m_Asm.FullFileName) + filename + ".ipt"))
{
if (this.radioButton1.Checked)
{
circleSticker(ref m_Doc, w, h, R, txt); filename += "(верт)";
}
else
{
circleSticker(ref m_Doc, h, w, R, txt);
}
}
}
filename = path(m_Asm.FullFileName) + filename + ".ipt";
if (!System.IO.File.Exists(filename))
{
m_Doc.SaveAs(filename, false);
Document tmp_Doc = invApp.Documents.Open(filename, false);
tmp_Doc.PropertySets[3][2].Value = nameStricker;
tmp_Doc.Save();
tmp_Doc.Close();
m_Doc.Close();
}
Inventor.Point pt = m_TG.CreatePoint();
//pos = m_TG.CreateMatrix();
//rot.SetCoordinateSystem(insPt, m_TG.CreateVector(YCoord: 1), m_TG.CreateVector(1) , m_TG.CreateVector(ZCoord: 1));
//pos.TransformBy(rot);
// if (face.SurfaceType == SurfaceTypeEnum.kPlaneSurface && !System.IO.File.Exists(filename))
// {
//}
AssemblyComponentDefinition compDef = m_Asm.ComponentDefinition;
//pos.Cell[4, 1] = insPt.X; pos.Cell[4, 2] = insPt.Y; pos.Cell[4, 3] = insPt.Z;
rot = m_TG.CreateMatrix();
ComponentOccurrence occ = compDef.Occurrences.Add(filename, rot);
Vector vec1 = InvDoc.u.getAxis(face);
Vector vec2 = InvDoc.u.getAxis(occ);
if (!InvDoc.u.eq(vec1, vec2))
{
rot.SetToRotateTo(vec1, vec2);
}
//m_Asm.ComponentDefinition.WorkPoints.AddFixed(insPt);
vec = pt.VectorTo(insPt);
rot.SetTranslation(vec);
//rot.Cell[1, 4] = insPt.X; rot.Cell[2, 4] = insPt.Y; rot.Cell[3, 4] = insPt.Z;
//occ.Transformation = rot;
occ.SetTransformWithoutConstraints(rot);
//rot.SetToRotateTo(m_TG.CreateVector(ZCoord: 1), vecZ.AsVector(), m_TG.CreateVector(XCoord: 1));
//rot.SetTranslation(vec);
//return;
//Face face2 = occ.SurfaceBodies[1].Faces[5];
object fac = null;
occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkPlanes[3], out fac);
WorkPlaneProxy face2 = (WorkPlaneProxy)fac;
PartComponentDefinition def = (PartComponentDefinition)occ.Definition;
//Inventor.Point pt2 = def.WorkPoints[1].Point;
//pos.Invert();
//pt2.TransformBy(pos);
if (face.SurfaceType == SurfaceTypeEnum.kPlaneSurface)
{
compDef.Constraints.AddFlushConstraint(face, face2, 0);
}
else if (face.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
//foreach (Face f in occ.SurfaceBodies[1].Faces)
//{
// if (f.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
// {
// if (Math.Round(((Cylinder)f.Geometry).Radius, 2) == R)
// {
// face2 = f; break;
// }
// }
//}
occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkAxes[2], out fac);
compDef.Constraints.AddMateConstraint((WorkAxisProxy)fac, face, 0, InferredTypeEnum.kInferredLine, InferredTypeEnum.kInferredLine);
}
//Matrix trans = m_TG.CreateMatrix();
//trans.SetTranslation(vec,true);
//occ.Transformation.Cell[1, 4] = insPt.X; occ.Transformation.Cell[2, 4] = insPt.Y; occ.Transformation.Cell[3, 4] = insPt.Z;
object face1 = null;
if (face.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
if (offset1 > 0.05 && offset1 < 0.4)
{
//PartComponentDefinition pDef = ((PartDocument)((FaceProxy)face).ContainingOccurrence.Definition.Document).ComponentDefinition;
((FaceProxy)face).ContainingOccurrence.CreateGeometryProxy(InvDoc.u.getPlane((FaceProxy)face), out fac);
//createProxy((FaceProxy)face, (int)(offset1 * 10), ref fac);
//occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkPlanes[(int)(offset1 * 10)], out fac);
face1 = fac;
offset1 = 0;
}
else /*if (offset1 != 0)*/
{
offset1 += w / 20;
ent = (Edge)cmdMgr.Pick(SelectionFilterEnum.kPartEdgeCircularFilter, "Выберите торцевое ребро:");
if (ent.Faces[1].SurfaceType == SurfaceTypeEnum.kPlaneSurface)
{
face1 = ent.Faces[1];
}
else
{
face1 = ent.Faces[2];
}
}
// if (offset2 != 0)
// {
// offset2 += h / 20;
// }
//face1 = cmdMgr.Pick(SelectionFilterEnum.kPartEdgeCircularFilter, "Выберите тор"
}
else
{
if (offset1 > 0.05 && offset1 < 0.4)
{
createProxy((FaceProxy)face, (int)(offset1 * 10), ref fac);
//occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkPlanes[(int)(offset1 * 10)], out fac);
edge1 = fac;
offset1 = 0;
}
else /*if (offset1 != 0)*/
{
offset1 += h / 20;
edge1 = cmdMgr.Pick(SelectionFilterEnum.kAllEntitiesFilter, "Выберите ребро или плоскость:");
}
}
//face2 = occ.SurfaceBodies[1].Faces[2];
occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkPlanes[2], out fac);
face2 = (WorkPlaneProxy)fac;
MateConstraint mc = null; FlushConstraint fc = null;
// if (offset2 < 0.4)
// {
// face1 = createProxy(occ, (int)(offset2 * 10)); //compDef.WorkPlanes[(int)(offset2*10)];
// }
//else if (offset2 != 0) offset2 += h / 20;
if (face.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
fc = compDef.Constraints.AddFlushConstraint(face2, face1, offset1);
}
else
{
mc = compDef.Constraints.AddMateConstraint(face2, edge1, offset1);
}
// Inventor.Point ptmc = occ.RangeBox.MinPoint;
// SelectionFilterEnum [] f = {SelectionFilterEnum.kPartFaceFilter};
// ObjectsEnumerator en = compDef.FindUsingPoint(ptmc, ref f, 0.1);
if (/*en.Count < 3*/ InvDoc.u.intersPoint(compDef, occ, (FaceProxy)face))
{
if (mc != null)
{
mc.Offset.Value = -(double)mc.Offset.Value;
}
//else fc.Offset.Value = - (double)fc.Offset.Value;
}
if (offset2 > 0.05 && offset2 < 0.4)
{
createProxy((FaceProxy)face, (int)(offset2 * 10), ref fac);
//occ.CreateGeometryProxy(((PartComponentDefinition)face.ReferenceComponent.ReferencedDocumentDescriptor.ReferencedDocument.Definition).WorkPlanes[(int)(offset2 * 10)], out fac);
edge2 = fac;
offset2 = 0;
}
else /*if (offset2 != 0)*/
{
if (face.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
offset2 += h / 20;
}
else
{
offset2 += w / 20;
}
edge2 = cmdMgr.Pick(SelectionFilterEnum.kAllEntitiesFilter, "Выберите ребро или плоскость:");
}
//face2 = occ.SurfaceBodies[1].Faces[1];
occ.CreateGeometryProxy(((PartComponentDefinition)occ.Definition).WorkPlanes[1], out fac);
face2 = (WorkPlaneProxy)fac;
mc = compDef.Constraints.AddMateConstraint(face2, edge2, offset2);
if (mc.HealthStatus == HealthStatusEnum.kInconsistentHealth)
{
occ.Constraints[2].ConvertToFlushConstraint(occ.Constraints[2].EntityOne, occ.Constraints[2].EntityTwo, offset1);
}
//en = compDef.FindUsingPoint(ptmc, ref f, 0.1);
m_Asm.Update();
if (/*en.Count < 3*/ InvDoc.u.intersPoint(compDef, occ, (FaceProxy)face))
{
mc.Delete();
mc = compDef.Constraints.AddMateConstraint(face2, edge2, offset2);
m_Asm.Update();
if (InvDoc.u.intersPoint(compDef, occ, (FaceProxy)face))
{
//mc.Delete();
//mc = compDef.Constraints.AddMateConstraint(face2, edge1, -offset2);
double dist = Macros.StandardAddInServer.m_inventorApplication.MeasureTools.GetMinimumDistance(occ.RangeBox.MinPoint, edge2);
if (dist > offset2 * 2)
{
rot = m_TG.CreateMatrix();
Vector tr = occ.Transformation.Translation;
rot.SetToRotation(Math.PI, InvDoc.u.getAxis(occ), m_TG.CreatePoint(tr.X, tr.Y, tr.Z));
mc.Delete();
occ.Transformation = rot;
mc = compDef.Constraints.AddMateConstraint(face2, edge2, offset2);
if (InvDoc.u.intersPoint(compDef, occ, (FaceProxy)face))
{
mc.Offset.Value = -(double)mc.Offset.Value;
}
}
else if (InvDoc.u.intersPoint(compDef, occ, (FaceProxy)face))
{
mc.Offset.Value = -(double)mc.Offset.Value;
}
m_Asm.Update();
}
//mc.Offset.Value = -(double)mc.Offset.Value;
}
//occ.Transformation = trans;
}
this.Close();
}
catch (Exception)
{
//MessageBox.Show(ex.ToString());
this.Close();
}
}