public string GetSketchElementNameByReportName(string cSketchName, string cReportName)
{
string cSketchElementName = null;
for (int i = 1; i <= PartManager.cSketches.Count; ++i)
{
MECMOD.Sketch cSketch = PartManager.cSketches.Item(i);
// 해당 스케치면 진입
if (cSketch.get_Name() == cSketchName)
{
// 해당 스케치의 스케치 요소 탐색
for (int j = 1; j <= cSketch.GeometricElements.Count; ++j)
{
MECMOD.GeometricElement cGeom = cSketch.GeometricElements.Item(j);
string cTempReportName = null;
if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeLine2D)
{
cTempReportName = ((MECMOD.Line2D)cGeom).ReportName.ToString();
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeCircle2D)
{
cTempReportName = ((MECMOD.Circle2D)cGeom).ReportName.ToString();
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeEllipse2D)
{
cTempReportName = ((MECMOD.Ellipse2D)cGeom).ReportName.ToString();
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeHyperbola2D)
{
cTempReportName = ((MECMOD.Hyperbola2D)cGeom).ReportName.ToString();
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeParabola2D)
{
cTempReportName = ((MECMOD.Parabola2D)cGeom).ReportName.ToString();
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeSpline2D)
{
cTempReportName = ((MECMOD.Spline2D)cGeom).ReportName.ToString();
}
// ReportName이 동일하면 해당 요소의 이름을 리턴
if (cTempReportName == cReportName)
{
cSketchElementName = cGeom.get_Name();
break;
}
}
break;
}
}
return(cSketchElementName);
}
// Pre
public void TranslateC2T(MECMOD.GeometricElement cGeom)
{
MECMOD.Circle2D cCircle = (MECMOD.Circle2D)cGeom;
string cCircleName = cCircle.get_Name();
object[] StartCoords = new object[2];
object[] EndCoords = new object[2];
object[] CenterCoords = new object[2];
cCircle.StartPoint.GetCoordinates(StartCoords);
cCircle.EndPoint.GetCoordinates(EndCoords);
cCircle.GetCenter(CenterCoords);
double cRadius = cCircle.Radius;
// 반올림 (TransCAD에 2D 제약조건이 없어서 현재는 반드시 필요)
Tool.Round(CenterCoords);
Tool.Round(StartCoords);
Tool.Round(EndCoords);
// Circle인 경우
if (Math.Abs((double)StartCoords.GetValue(0) - (double)EndCoords.GetValue(0)) < 0.00001 &&
Math.Abs((double)StartCoords.GetValue(1) - (double)EndCoords.GetValue(1)) < 0.00001)
{
SketchManager.tSketchEditor.Create2DCircleCenterPoint(cCircleName, (double)CenterCoords.GetValue(0), (double)CenterCoords.GetValue(1), cRadius);
}
else // Arc인 경우
{
double param = 0.0;
object[] tangency = new object[2];
cCircle.GetTangent(param, tangency);
if ((double)tangency.GetValue(1) > 0.0)
{
SketchManager.tSketchEditor.Create2DArcCenterStartEnd(cCircleName, (double)CenterCoords.GetValue(0), (double)CenterCoords.GetValue(1),
(double)StartCoords.GetValue(0), (double)StartCoords.GetValue(1),
(double)EndCoords.GetValue(0), (double)EndCoords.GetValue(1));
}
else
{
SketchManager.tSketchEditor.Create2DArcCenterStartEnd(cCircleName, (double)CenterCoords.GetValue(0), (double)CenterCoords.GetValue(1),
(double)EndCoords.GetValue(0), (double)EndCoords.GetValue(1),
(double)StartCoords.GetValue(0), (double)StartCoords.GetValue(1));
}
}
}
// Pre
public void TranslateC2T(MECMOD.GeometricElement cGeom)
{
MECMOD.Line2D cLine = (MECMOD.Line2D)cGeom;
object[] StartCoords = new object[2];
object[] EndCoords = new object[2];
string cLineName = cLine.get_Name();
cLine.StartPoint.GetCoordinates(StartCoords);
cLine.EndPoint.GetCoordinates(EndCoords);
if (cLine == SketchManager.cCenterLine) // Centerline인 경우
{
SketchManager.tSketchEditor.Create2DCenterline2Points(cLineName, (double)StartCoords.GetValue(0), (double)StartCoords.GetValue(1), (double)EndCoords.GetValue(0), (double)EndCoords.GetValue(1));
}
else // 일반 Line인 경우
{
SketchManager.tSketchEditor.Create2DLine2Points(cLineName, (double)StartCoords.GetValue(0), (double)StartCoords.GetValue(1), (double)EndCoords.GetValue(0), (double)EndCoords.GetValue(1));
}
}
// Pre
public void TranslateC2T(MECMOD.Sketch cSketch)
{
string sketchName = cSketch.get_Name();
MECMOD.GeometricElements cGeoms = cSketch.GeometricElements;
cCenterLine = cSketch.CenterLine;
object[] cCoords = new object[9];
cSketch.GetAbsoluteAxisData(cCoords);
TransCAD.Reference tSktReference = PartManager.ReferenceManager.GetTransCADSketchReference(cSketch);
TransCAD.StdSketchFeature tSketch = PartManager.tFeatures.AddNewSketchFeature(sketchName, tSktReference);
tSketch.SetCoordinateSystem((double)cCoords.GetValue(0), (double)cCoords.GetValue(1), (double)cCoords.GetValue(2),
(double)cCoords.GetValue(3), (double)cCoords.GetValue(4), (double)cCoords.GetValue(5),
(double)cCoords.GetValue(6), (double)cCoords.GetValue(7), (double)cCoords.GetValue(8));
tSketchEditor = tSketch.OpenEditorEx(false);
for (int i = 1; i <= cGeoms.Count; i++)
{
MECMOD.GeometricElement cGeom = cGeoms.Item(i);
if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeLine2D)
{
SketchLine2D line2D = new SketchLine2D(this);
line2D.TranslateC2T(cGeom);
}
else if (cGeom.GeometricType == MECMOD.CatGeometricType.catGeoTypeCircle2D)
{
SketchCircle2D circle2D = new SketchCircle2D(this);
circle2D.TranslateC2T(cGeom);
}
}
tSketchEditor.Close();
tReference = PartManager.tPart.SelectObjectByName(sketchName);
}
// Post
public void TranslateT2C(TransCAD.IFeature tFeature)
{
TransCAD.IStdSketchFeature tSketch = (TransCAD.IStdSketchFeature)tFeature;
string sketchName = tSketch.Name;
TransCAD.IStdSketchGeometries tGeoms = tSketch.Geometries;
double[] coords = new double[9];
object[] tCoords = new object[9];
tSketch.GetCoordinateSystem(out coords[0], out coords[1], out coords[2],
out coords[3], out coords[4], out coords[5],
out coords[6], out coords[7], out coords[8]);
for (int i = 0; i < 9; ++i)
{
tCoords[i] = coords[i];
}
INFITF.Reference cSktReference = PartManager.ReferenceManager.GetCATIASketchReference(tSketch);
MECMOD.Sketch cSketch = PartManager.cSketches.Add(cSktReference);
cSketch.SetAbsoluteAxisData(tCoords);
cFactory = cSketch.OpenEdition();
// 스케치 로컬 좌표 축 설정
MECMOD.GeometricElement axis = cSketch.GeometricElements.Item("AbsoluteAxis");
INFITF.CATBaseDispatch localX = axis.GetItem("HDirection");
MECMOD.Line2D locX = (MECMOD.Line2D)localX;
locX.ReportName = ++cReportName;
INFITF.CATBaseDispatch localY = axis.GetItem("VDirection");
MECMOD.Line2D locY = (MECMOD.Line2D)localY;
locX.ReportName = ++cReportName;
IEnumerator tGeomList = tGeoms.GetEnumerator();
while (tGeomList.MoveNext())
{
TransCAD.IStdSketchGeometry tGeom = (TransCAD.IStdSketchGeometry)tGeomList.Current;
if (tGeom.Type == TransCAD.StdSketchGeometryType.Line ||
tGeom.Type == TransCAD.StdSketchGeometryType.Centerline)
{
SketchLine2D line2D = new SketchLine2D(this);
line2D.TranslateT2C(tGeom);
if (tGeom.Type == TransCAD.StdSketchGeometryType.Centerline)
{
cSketch.CenterLine = cCenterLine;
}
}
else if (tGeom.Type == TransCAD.StdSketchGeometryType.Circle ||
tGeom.Type == TransCAD.StdSketchGeometryType.CircularArc)
{
SketchCircle2D circle2D = new SketchCircle2D(this);
circle2D.TranslateT2C(tGeom);
}
}
cSketch.CloseEdition();
cReference = PartManager.cPart.CreateReferenceFromObject(cSketch);
PartManager.cPart.InWorkObject = cSketch;
PartManager.cPart.UpdateObject(cSketch);
PartManager.ReferenceManager.NameMap.Add(tSketch.Name, cSketch.get_Name());
}
