private void drawFullChart(WPFViewPortControl vpc, WPFChartViewer viewer)
{
// Create an XYChart object of size 640 x 60 pixels
XYChart c = new XYChart(640, 60);
// Set the plotarea with the same horizontal position as that in the main chart for alignment.
c.setPlotArea(55, 0, c.getWidth() - 80, c.getHeight() - 1, 0xc0d8ff, -1, 0x888888,
Chart.Transparent, 0xffffff);
// Set the x axis stem to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
// Put the x-axis labels inside the plot area by setting a negative label gap. Use
// setLabelAlignment to put the label at the right side of the tick.
c.xAxis().setLabelGap(-1);
c.xAxis().setLabelAlignment(1);
// Set the y axis stem and labels to transparent (that is, hide the labels)
c.yAxis().setColors(Chart.Transparent, Chart.Transparent);
// Add a line layer for the lines with fast line mode enabled
LineLayer layer = c.addLineLayer();
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (0xff3333), green
// (0x008800) and blue (0x3333cc)
layer.setXData(timeStamps);
layer.addDataSet(dataSeriesA, 0xff3333);
layer.addDataSet(dataSeriesB, 0x008800);
layer.addDataSet(dataSeriesC, 0x3333cc);
// The x axis scales should reflect the full range of the view port
c.xAxis().setDateScale(viewer.getValueAtViewPort("x", 0), viewer.getValueAtViewPort("x", 1));
// For the automatic x-axis labels, set the minimum spacing to 75 pixels.
c.xAxis().setTickDensity(75);
// For the auto-scaled y-axis, as we hide the labels, we can disable axis rounding. This can
// make the axis scale fit the data tighter.
c.yAxis().setRounding(false, false);
// Output the chart
vpc.Chart = c;
}
//
// Draw the chart.
//
private void drawChart(WinChartViewer viewer)
{
// Get the start date and end date that are visible on the chart.
double viewPortStartDate = viewer.getValueAtViewPort("x", viewer.ViewPortLeft);
double viewPortEndDate = viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth);
// Extract the part of the data arrays that are visible.
double[] viewPortTimeStamps = null;
double[] viewPortDataSeriesA = null;
double[] viewPortDataSeriesB = null;
if (currentIndex > 0)
{
// Get the array indexes that corresponds to the visible start and end dates
int startIndex = (int)Math.Floor(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortStartDate));
int endIndex = (int)Math.Ceiling(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortEndDate));
int noOfPoints = endIndex - startIndex + 1;
// Extract the visible data
viewPortTimeStamps = (double[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
viewPortDataSeriesA = (double[])Chart.arraySlice(dataSeriesA, startIndex, noOfPoints);
viewPortDataSeriesB = (double[])Chart.arraySlice(dataSeriesB, startIndex, noOfPoints);
chartTimeLimit = timeStamps[currentIndex - 1];
}
//
// At this stage, we have extracted the visible data. We can use those data to plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object of size 640 x 350 pixels
XYChart c = new XYChart(512, 288);
// Set the position, size and colors of the plot area
c.setPlotArea(23, 33, c.getWidth() - 41, c.getHeight() - 53, c.linearGradientColor(0, 33, 0,
c.getHeight() - 53, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// As the data can lie outside the plotarea in a zoomed chart, we need enable clipping.
c.setClipping();
// Add a title to the chart using 18 pts Arial font
c.addTitle("Gerçek Zamanlı Motor Verileri", "Arial", 18);
// Add a legend box at (60, 28) using horizontal layout. Use 8pts Arial Bold as font. Set the
// background and border color to Transparent and use line style legend key.
LegendBox b = c.addLegend(60, 28, false, "Arial Bold", 10);
b.setBackground(Chart.Transparent);
b.setLineStyleKey();
// Set the x and y axis stems to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
c.yAxis().setLabelStyle("Arial Bold", 10, 0x336699);
// Set the y-axis tick length to 0 to disable the tick and put the labels closer to the axis.
c.yAxis().setLabelGap(-1);
c.yAxis().setLabelAlignment(1);
c.yAxis().setTickLength(0);
c.yAxis().setMargin(20);
// Add axis title using 12pts Arial Bold Italic font
c.yAxis().setTitle("Angular Rate", "Arial Bold", 12);
// Configure the x-axis tick length to 1 to put the labels closer to the axis.
c.xAxis().setTickLength(1);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use other
// representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff0000), green (00cc00)
// and blue (0000ff)
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortDataSeriesA, 0x00cc00, "Motor Devir");
layer.addDataSet(viewPortDataSeriesB, 0x0000ff, "Motor Sicaklik");
//================================================================================
// Configure axis scale and labelling
//================================================================================
if (currentIndex > 0)
{
c.xAxis().setDateScale(viewPortStartDate, viewPortEndDate);
}
// For the automatic axis labels, set the minimum spacing to 75/30 pixels for the x/y axis.
c.xAxis().setTickDensity(75);
c.yAxis().setTickDensity(30);
// We use "hh:nn:ss" as the axis label format.
c.xAxis().setLabelFormat("{value|nn:ss}");
// We make sure the tick increment must be at least 1 second.
c.xAxis().setMinTickInc(1);
//================================================================================
// Output the chart
//================================================================================
// We need to update the track line too.
trackLineLabel(c);
// Set the chart image to the WinChartViewer
viewer.Chart = c;
}
//
// Draw the chart.
//
private void drawChart(WinChartViewer viewer)
{
// Get the start date and end date that are visible on the chart.
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft));
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// Get the array indexes that corresponds to the visible start and end dates
int startIndex = (int)Math.Floor(Chart.bSearch(timeStamps, viewPortStartDate));
int endIndex = (int)Math.Ceiling(Chart.bSearch(timeStamps, viewPortEndDate));
int noOfPoints = endIndex - startIndex + 1;
// Extract the part of the data array that are visible.
DateTime[] viewPortTimeStamps = (DateTime[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
double[] viewPortDataSeriesA = (double[])Chart.arraySlice(dataSeriesA, startIndex, noOfPoints);
double[] viewPortDataSeriesB = (double[])Chart.arraySlice(dataSeriesB, startIndex, noOfPoints);
double[] viewPortDataSeriesC = (double[])Chart.arraySlice(dataSeriesC, startIndex, noOfPoints);
//
// At this stage, we have extracted the visible data. We can use those data to plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object 600 x 300 pixels in size, with pale blue (0xf0f0ff) background,
// black (000000) rounded border, 1 pixel raised effect.
XYChart c = new XYChart(600, 300, 0xf0f0ff, 0, 1);
c.setRoundedFrame(Chart.CColor(BackColor));
// Set the plotarea at (52, 60) and of size 520 x 205 pixels. Use white (ffffff) background.
// Enable both horizontal and vertical grids by setting their colors to grey (cccccc). Set
// clipping mode to clip the data lines to the plot area.
c.setPlotArea(52, 60, 520, 205, 0xffffff, -1, -1, 0xcccccc, 0xcccccc);
// As the data can lie outside the plotarea in a zoomed chart, we need to enable clipping.
c.setClipping();
// Add a top title to the chart using 15 pts Times New Roman Bold Italic font, with a light blue
// (ccccff) background, black (000000) border, and a glass like raised effect.
c.addTitle("Simple Zooming and Scrolling", "Times New Roman Bold Italic", 15
).setBackground(0xccccff, 0x0, Chart.glassEffect());
// Add a legend box at the top of the plot area with 9pts Arial Bold font with flow layout.
c.addLegend(50, 33, false, "Arial Bold", 9).setBackground(Chart.Transparent, Chart.Transparent);
// Set axes width to 2 pixels
c.yAxis().setWidth(2);
c.xAxis().setWidth(2);
// Add a title to the y-axis
c.yAxis().setTitle("Price (USD)", "Arial Bold", 9);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use other
// representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
// In this demo, we do not have too many data points. In real code, the chart may contain a lot
// of data points when fully zoomed out - much more than the number of horizontal pixels in this
// plot area. So it is a good idea to use fast line mode.
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff0000), green (00cc00)
// and blue (0000ff)
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortDataSeriesA, 0xff0000, "Product Alpha");
layer.addDataSet(viewPortDataSeriesB, 0x00cc00, "Product Beta");
layer.addDataSet(viewPortDataSeriesC, 0x0000ff, "Product Gamma");
//================================================================================
// Configure axis scale and labelling
//================================================================================
// Set the x-axis as a date/time axis with the scale according to the view port x range.
viewer.syncDateAxisWithViewPort("x", c.xAxis());
// In this demo, we rely on ChartDirector to auto-label the axis. We ask ChartDirector to ensure
// the x-axis labels are at least 75 pixels apart to avoid too many labels.
c.xAxis().setTickDensity(75);
//================================================================================
// Output the chart
//================================================================================
viewer.Chart = c;
}
//
// Draw the chart.
//
private void drawChart(WPFChartViewer viewer)
{
// Get the start date and end date that are visible on the chart.
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft));
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// Get the array indexes that corresponds to the visible start and end dates
int startIndex = (int)Math.Floor(Chart.bSearch(timeStamps, viewPortStartDate));
int endIndex = (int)Math.Ceiling(Chart.bSearch(timeStamps, viewPortEndDate));
int noOfPoints = endIndex - startIndex + 1;
// Extract the part of the data array that are visible.
DateTime[] viewPortTimeStamps = (DateTime[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
double[] viewPortDataSeriesA = (double[])Chart.arraySlice(dataSeriesA, startIndex, noOfPoints);
double[] viewPortDataSeriesB = (double[])Chart.arraySlice(dataSeriesB, startIndex, noOfPoints);
double[] viewPortDataSeriesC = (double[])Chart.arraySlice(dataSeriesC, startIndex, noOfPoints);
//
// At this stage, we have extracted the visible data. We can use those data to plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object of size 640 x 400 pixels
XYChart c = new XYChart(640, 400);
// Set the plotarea at (55, 55) with width 80 pixels less than chart width, and height 90 pixels
// less than chart height. Use a vertical gradient from light blue (f0f6ff) to sky blue (a0c0ff)
// as background. Set border to transparent and grid lines to white (ffffff).
c.setPlotArea(55, 55, c.getWidth() - 80, c.getHeight() - 90, c.linearGradientColor(0, 55, 0,
c.getHeight() - 35, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// As the data can lie outside the plotarea in a zoomed chart, we need enable clipping.
c.setClipping();
// Add a title to the chart using 15pt Arial Bold font
c.addTitle(" Zooming and Scrolling with Viewport Control", "Arial Bold", 15);
// Set legend icon style to use line style icon, sized for 10pt font
c.getLegend().setLineStyleKey();
c.getLegend().setFontSize(10);
// Set the x and y axis stems to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
c.yAxis().setLabelStyle("Arial", 10);
// Add axis title using 10pt Arial Bold font
c.yAxis().setTitle("Ionic Temperature (C)", "Arial Bold", 10);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use other
// representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
// In this demo, we do not have too many data points. In real code, the chart may contain a lot
// of data points when fully zoomed out - much more than the number of horizontal pixels in this
// plot area. So it is a good idea to use fast line mode.
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff33333), green (008800)
// and blue (3333cc)
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortDataSeriesA, 0xff3333, "Alpha");
layer.addDataSet(viewPortDataSeriesB, 0x008800, "Beta");
layer.addDataSet(viewPortDataSeriesC, 0x3333cc, "Gamma");
//================================================================================
// Configure axis scale and labelling
//================================================================================
// Set the x-axis as a date/time axis with the scale according to the view port x range.
viewer.syncDateAxisWithViewPort("x", c.xAxis());
// For the automatic y-axis labels, set the minimum spacing to 30 pixels.
c.yAxis().setTickDensity(30);
//
// In this demo, the time range can be from a few years to a few days. We demonstrate how to set
// up different date/time format based on the time range.
//
// If all ticks are yearly aligned, then we use "yyyy" as the label format.
c.xAxis().setFormatCondition("align", 360 * 86400);
c.xAxis().setLabelFormat("{value|yyyy}");
// If all ticks are monthly aligned, then we use "mmm yyyy" in bold font as the first label of a
// year, and "mmm" for other labels.
c.xAxis().setFormatCondition("align", 30 * 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(), "<*font=bold*>{value|mmm<*br*>yyyy}",
Chart.AllPassFilter(), "{value|mmm}");
// If all ticks are daily algined, then we use "mmm dd<*br*>yyyy" in bold font as the first
// label of a year, and "mmm dd" in bold font as the first label of a month, and "dd" for other
// labels.
c.xAxis().setFormatCondition("align", 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(),
"<*block,halign=left*><*font=bold*>{value|mmm dd<*br*>yyyy}", Chart.StartOfMonthFilter(),
"<*font=bold*>{value|mmm dd}");
c.xAxis().setMultiFormat2(Chart.AllPassFilter(), "{value|dd}");
// For all other cases (sub-daily ticks), use "hh:nn<*br*>mmm dd" for the first label of a day,
// and "hh:nn" for other labels.
c.xAxis().setFormatCondition("else");
c.xAxis().setMultiFormat(Chart.StartOfDayFilter(), "<*font=bold*>{value|hh:nn<*br*>mmm dd}",
Chart.AllPassFilter(), "{value|hh:nn}");
//================================================================================
// Output the chart
//================================================================================
// We need to update the track line too. If the mouse is moving on the chart (eg. if
// the user drags the mouse on the chart to scroll it), the track line will be updated
// in the MouseMovePlotArea event. Otherwise, we need to update the track line here.
if (!viewer.IsInMouseMoveEvent)
{
trackLineLegend(c, (null == viewer.Chart) ? c.getPlotArea().getRightX() :
viewer.PlotAreaMouseX);
}
viewer.Chart = c;
}
//
// Draw the chart.
//
private void drawChart(WPFChartViewer viewer)
{
// Get the start date and end date that are visible on the chart.
double viewPortStartDate = viewer.getValueAtViewPort("x", viewer.ViewPortLeft);
double viewPortEndDate = viewer.getValueAtViewPort("x", viewer.ViewPortLeft + viewer.ViewPortWidth);
// Extract the part of the data arrays that are visible.
double[] viewPortTimeStamps = null;
double[] viewPortDataSeriesA = null;
double[] viewPortDataSeriesB = null;
if (currentIndex > 0)
{
// Get the array indexes that corresponds to the visible start and end dates
int startIndex = (int)Math.Floor(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortStartDate));
int endIndex = (int)Math.Ceiling(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortEndDate));
int noOfPoints = endIndex - startIndex + 1;
// Extract the visible data
viewPortTimeStamps = (double[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
viewPortDataSeriesA = (double[])Chart.arraySlice(dataSeriesA, startIndex, noOfPoints);
viewPortDataSeriesB = (double[])Chart.arraySlice(dataSeriesB, startIndex, noOfPoints);
// Keep track of the latest available data at chart plotting time
trackLineEndPos = timeStamps[currentIndex - 1];
}
//
// At this stage, we have extracted the visible data. We can use those data to plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object of size 640 x 350 pixels
XYChart c = new XYChart(640, 350);
// Set the plotarea at (55, 50) with width 85 pixels less than chart width, and height 80 pixels
// less than chart height. Use a vertical gradient from light blue (f0f6ff) to sky blue (a0c0ff)
// as background. Set border to transparent and grid lines to white (ffffff).
c.setPlotArea(55, 50, c.getWidth() - 85, c.getHeight() - 80, c.linearGradientColor(0, 50, 0,
c.getHeight() - 30, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// As the data can lie outside the plotarea in a zoomed chart, we need enable clipping.
c.setClipping();
// Add a title to the chart using 18 pts Times New Roman Bold Italic font
c.addTitle(" Multithreading Real-Time Chart", "Arial", 18);
// Add a legend box at (55, 25) using horizontal layout. Use 8pts Arial Bold as font. Set the
// background and border color to Transparent and use line style legend key.
LegendBox b = c.addLegend(55, 25, false, "Arial Bold", 10);
b.setBackground(Chart.Transparent);
b.setLineStyleKey();
// Set the x and y axis stems to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
c.yAxis().setLabelStyle("Arial", 10);
// Add axis title using 10pts Arial Bold Italic font
c.yAxis().setTitle("Ionic Temperature (C)", "Arial Bold", 10);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use other
// representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff0000), green (00cc00)
// and blue (0000ff)
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortDataSeriesA, 0xff0000, "Alpha");
layer.addDataSet(viewPortDataSeriesB, 0x00cc00, "Beta");
//================================================================================
// Configure axis scale and labelling
//================================================================================
if (currentIndex > 0)
{
c.xAxis().setDateScale(viewPortStartDate, viewPortEndDate);
}
// For the automatic axis labels, set the minimum spacing to 75/30 pixels for the x/y axis.
c.xAxis().setTickDensity(75);
c.yAxis().setTickDensity(30);
// We use "hh:nn:ss" as the axis label format.
c.xAxis().setLabelFormat("{value|hh:nn:ss}");
// We make sure the tick increment must be at least 1 second.
c.xAxis().setMinTickInc(1);
// Set the auto-scale margin to 0.05, and the zero affinity to 0.6
c.yAxis().setAutoScale(0.05, 0.05, 0.6);
//================================================================================
// Output the chart
//================================================================================
// We need to update the track line too. If the mouse is moving on the chart (eg. if
// the user drags the mouse on the chart to scroll it), the track line will be updated
// in the MouseMovePlotArea event. Otherwise, we need to update the track line here.
if (!WPFChartViewer1.IsInMouseMoveEvent)
{
trackLineLabel(c, trackLineIsAtEnd ? c.getWidth() : viewer.PlotAreaMouseX);
}
viewer.Chart = c;
}
//
// Draw the chart.
//
private void drawChart(WPFChartViewer viewer)
{
// Get the start date and end date that are visible on the chart.
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft));
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// Extract the part of the data arrays that are visible.
DateTime[] viewPortTimeStamps = null;
double[] viewPortDataSeriesA = null;
double[] viewPortDataSeriesB = null;
double[] viewPortDataSeriesC = null;
if (currentIndex > 0)
{
// Get the array indexes that corresponds to the visible start and end dates
int startIndex = (int)Math.Floor(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortStartDate));
int endIndex = (int)Math.Ceiling(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortEndDate));
int noOfPoints = endIndex - startIndex + 1;
// Extract the visible data
viewPortTimeStamps = (DateTime[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
viewPortDataSeriesA = (double[])Chart.arraySlice(dataSeriesA, startIndex, noOfPoints);
viewPortDataSeriesB = (double[])Chart.arraySlice(dataSeriesB, startIndex, noOfPoints);
viewPortDataSeriesC = (double[])Chart.arraySlice(dataSeriesC, startIndex, noOfPoints);
}
//
// At this stage, we have extracted the visible data. We can use those data to plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object of size 640 x 350 pixels
XYChart c = new XYChart(640, 350);
// Set the plotarea at (55, 50) with width 80 pixels less than chart width, and height 85 pixels
// less than chart height. Use a vertical gradient from light blue (f0f6ff) to sky blue (a0c0ff)
// as background. Set border to transparent and grid lines to white (ffffff).
c.setPlotArea(55, 50, c.getWidth() - 85, c.getHeight() - 80, c.linearGradientColor(0, 50, 0,
c.getHeight() - 35, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// As the data can lie outside the plotarea in a zoomed chart, we need enable clipping.
c.setClipping();
// Add a title to the chart using 18 pts Times New Roman Bold Italic font
c.addTitle(" Realtime Chart with Zoom/Scroll and Track Line", "Arial", 18);
// Add a legend box at (55, 25) using horizontal layout. Use 8pts Arial Bold as font. Set the
// background and border color to Transparent and use line style legend key.
LegendBox b = c.addLegend(55, 25, false, "Arial Bold", 10);
b.setBackground(Chart.Transparent);
b.setLineStyleKey();
// Set the x and y axis stems to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
c.yAxis().setLabelStyle("Arial", 10);
// Add axis title using 10pts Arial Bold Italic font
c.yAxis().setTitle("Ionic Temperature (C)", "Arial Bold", 10);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use other
// representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff0000), green (00cc00)
// and blue (0000ff)
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortDataSeriesA, 0xff0000, "Alpha");
layer.addDataSet(viewPortDataSeriesB, 0x00cc00, "Beta");
layer.addDataSet(viewPortDataSeriesC, 0x0000ff, "Gamma");
//================================================================================
// Configure axis scale and labelling
//================================================================================
if (currentIndex > 0)
{
c.xAxis().setDateScale(viewPortStartDate, viewPortEndDate);
}
// For the automatic axis labels, set the minimum spacing to 75/30 pixels for the x/y axis.
c.xAxis().setTickDensity(75);
c.yAxis().setTickDensity(30);
//
// In a zoomable chart, the time range can be from a few years to a few seconds. We can need
// to define the date/time format the various cases.
//
// If all ticks are year aligned, we use "yyyy" as the label format.
c.xAxis().setFormatCondition("align", 360 * 86400);
c.xAxis().setLabelFormat("{value|yyyy}");
// If all ticks are month aligned, we use "mmm yyyy" in bold font as the first label of a year,
// and "mmm" for other labels.
c.xAxis().setFormatCondition("align", 30 * 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(), "<*font=bold*>{value|mmm yyyy}",
Chart.AllPassFilter(), "{value|mmm}");
// If all ticks are day algined, we use "mmm dd<*br*>yyyy" in bold font as the first label of a
// year, and "mmm dd" in bold font as the first label of a month, and "dd" for other labels.
c.xAxis().setFormatCondition("align", 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(),
"<*block,halign=left*><*font=bold*>{value|mmm dd<*br*>yyyy}", Chart.StartOfMonthFilter(),
"<*font=bold*>{value|mmm dd}");
c.xAxis().setMultiFormat2(Chart.AllPassFilter(), "{value|dd}");
// If all ticks are hour algined, we use "hh:nn<*br*>mmm dd" in bold font as the first label of
// the Day, and "hh:nn" for other labels.
c.xAxis().setFormatCondition("align", 3600);
c.xAxis().setMultiFormat(Chart.StartOfDayFilter(), "<*font=bold*>{value|hh:nn<*br*>mmm dd}",
Chart.AllPassFilter(), "{value|hh:nn}");
// If all ticks are minute algined, then we use "hh:nn" as the label format.
c.xAxis().setFormatCondition("align", 60);
c.xAxis().setLabelFormat("{value|hh:nn}");
// If all other cases, we use "hh:nn:ss" as the label format.
c.xAxis().setFormatCondition("else");
c.xAxis().setLabelFormat("{value|hh:nn:ss}");
// We make sure the tick increment must be at least 1 second.
c.xAxis().setMinTickInc(1);
//================================================================================
// Output the chart
//================================================================================
// We need to update the track line too. If the mouse is moving on the chart (eg. if
// the user drags the mouse on the chart to scroll it), the track line will be updated
// in the MouseMovePlotArea event. Otherwise, we need to update the track line here.
if (!viewer.IsInMouseMoveEvent)
{
trackLineLabel(c, (null == viewer.Chart) ? c.getPlotArea().getRightX() :
viewer.PlotAreaMouseX);
}
viewer.Chart = c;
}
//
// Draw the chart
//
private void drawChart(RazorChartViewer viewer)
{
// Determine the visible x-axis range
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft))
;
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// We need to get the data within the visible x-axis range. In real code, this can be by
// using a database query or some other means as specific to the application. In this demo,
// we just generate a random data table, and then select the data within the table.
RanTable r = getRandomTable();
// Select the data for the visible date range viewPortStartDate to viewPortEndDate. It is
// possible there is no data point at exactly viewPortStartDate or viewPortEndDate. In this
// case, we also need the data points that are just outside the visible date range to
// "overdraw" the line a little bit (the "overdrawn" part will be clipped to the plot area)
// In this demo, we do this by adding a one day margin to the date range when selecting the
// data.
r.selectDate(0, viewPortStartDate.AddDays(-1), viewPortEndDate.AddDays(1));
// The selected data from the random data table
DateTime[] timeStamps = Chart.NTime(r.getCol(0));
double[] dataSeriesA = r.getCol(1);
double[] dataSeriesB = r.getCol(2);
double[] dataSeriesC = r.getCol(3);
//
// Now we have obtained the data, we can plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object of size 640 x 350 pixels
XYChart c = new XYChart(640, 350);
// Set the plotarea at (55, 55) with width 80 pixels less than chart width, and height 90
// pixels less than chart height. Use a vertical gradient from light blue (f0f6ff) to sky
// blue (a0c0ff) as background. Set border to transparent and grid lines to white (ffffff).
c.setPlotArea(55, 55, c.getWidth() - 80, c.getHeight() - 90, c.linearGradientColor(0, 55, 0,
c.getHeight() - 35, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// As the data can lie outside the plotarea in a zoomed chart, we need to enable clipping.
c.setClipping();
// Add a title to the chart using 18pt Times New Roman Bold Italic font
c.addTitle(" Zooming and Scrolling with Track Line", "Times New Roman Bold Italic", 18);
// Set the axis stem to transparent
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
// Add axis title using 10pt Arial Bold Italic font
c.yAxis().setTitle("Ionic Temperature (C)", "Arial Bold Italic", 10);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use
// other layer types (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
// In this demo, we do not have too many data points. In real code, the chart may contain a
// lot of data points when fully zoomed out - much more than the number of horizontal pixels
// in this plot area. So it is a good idea to use fast line mode.
layer.setFastLineMode();
// Add up to 3 data series to a line layer, depending on whether the user has selected the
// data series.
layer.setXData(timeStamps);
if (viewer.GetCustomAttr("data0CheckBox") != "F")
{
layer.addDataSet(dataSeriesA, 0xff3333, "Alpha Series");
}
if (viewer.GetCustomAttr("data1CheckBox") != "F")
{
layer.addDataSet(dataSeriesB, 0x008800, "Beta Series");
}
if (viewer.GetCustomAttr("data2CheckBox") != "F")
{
layer.addDataSet(dataSeriesC, 0x3333cc, "Gamma Series");
}
//================================================================================
// Configure axis scale and labelling
//================================================================================
// Set the x-axis as a date/time axis with the scale according to the view port x range.
viewer.syncDateAxisWithViewPort("x", c.xAxis());
//
// In this demo, the time range can be from a few years to a few days. We demonstrate how to
// set up different date/time format based on the time range.
//
// If all ticks are yearly aligned, then we use "yyyy" as the label format.
c.xAxis().setFormatCondition("align", 360 * 86400);
c.xAxis().setLabelFormat("{value|yyyy}");
// If all ticks are monthly aligned, then we use "mmm yyyy" in bold font as the first label
// of a year, and "mmm" for other labels.
c.xAxis().setFormatCondition("align", 30 * 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(), "<*font=bold*>{value|mmm yyyy}",
Chart.AllPassFilter(), "{value|mmm}");
// If all ticks are daily algined, then we use "mmm dd<*br*>yyyy" in bold font as the first
// label of a year, and "mmm dd" in bold font as the first label of a month, and "dd" for
// other labels.
c.xAxis().setFormatCondition("align", 86400);
c.xAxis().setMultiFormat(Chart.StartOfYearFilter(),
"<*block,halign=left*><*font=bold*>{value|mmm dd<*br*>yyyy}", Chart.StartOfMonthFilter(),
"<*font=bold*>{value|mmm dd}");
c.xAxis().setMultiFormat2(Chart.AllPassFilter(), "{value|dd}");
// For all other cases (sub-daily ticks), use "hh:nn<*br*>mmm dd" for the first label of a
// day, and "hh:nn" for other labels.
c.xAxis().setFormatCondition("else");
c.xAxis().setMultiFormat(Chart.StartOfDayFilter(), "<*font=bold*>{value|hh:nn<*br*>mmm dd}",
Chart.AllPassFilter(), "{value|hh:nn}");
//================================================================================
// Step 5 - Output the chart
//================================================================================
// Output the chart
viewer.Image = c.makeWebImage(Chart.PNG);
// Output Javascript chart model to the browser to suppport tracking cursor
viewer.ChartModel = c.getJsChartModel();
}
//
// Draw the chart
//
private void drawChart(WPFChartViewer viewer)
{
// Have not started collecting data ???
if (currentIndex <= 0)
{
return;
}
// The start time is equal to the latest time minus the time range of the chart
double startTime = timeStamps[currentIndex - 1] - timeRange;
int startIndex = (int)Math.Ceiling(Chart.bSearch(timeStamps, 0, currentIndex, startTime) - 0.1);
// For a sweep chart, if the line goes beyond the right border, it will wrap back to
// the left. We need to determine the wrap position (the right border).
double wrapTime = Math.Floor(startTime / timeRange + 1) * timeRange;
double wrapIndex = Chart.bSearch(timeStamps, 0, currentIndex, wrapTime);
int wrapIndexA = (int)Math.Ceiling(wrapIndex);
int wrapIndexB = (int)Math.Floor(wrapIndex);
// The data arrays and the colors and names of the data series
var allArrays = new[] { timeStamps, channel1, channel2 };
int[] colors = { 0xff0000, 0x00cc00 };
string[] names = { "Channel 1", "Channel 2" };
// Split all data arrays into two parts A and B at the wrap position. The B part is the
// part that is wrapped back to the left.
var allArraysA = new double[allArrays.Length][];
var allArraysB = new double[allArrays.Length][];
for (int i = 0; i < allArrays.Length; ++i)
{
allArraysA[i] = (double[])Chart.arraySlice(allArrays[i], startIndex, wrapIndexA - startIndex + 1);
allArraysB[i] = (double[])Chart.arraySlice(allArrays[i], wrapIndexB, currentIndex - wrapIndexB);
}
// Normalize the plotted timeStamps (the first element of allArrays) to start from 0
for (int i = 0; i < allArraysA[0].Length; ++i)
{
allArraysA[0][i] -= wrapTime - timeRange;
}
for (int i = 0; i < allArraysB[0].Length; ++i)
{
allArraysB[0][i] -= wrapTime;
}
//
// Now we have prepared all the data and can plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object the same size as WPFChartViewer, with a minimum of 300 x 150
XYChart c = new XYChart(Math.Max(300, (int)viewer.ActualWidth), Math.Max(150, (int)viewer.ActualHeight));
// Set the plotarea at (0, 0) with width 1 pixel less than chart width, and height 20 pixels
// less than chart height. Use a vertical gradient from light blue (f0f6ff) to sky blue (a0c0ff)
// as background. Set border to transparent and grid lines to white (ffffff).
c.setPlotArea(0, 0, c.getWidth() - 1, c.getHeight() - 20, c.linearGradientColor(0, 0, 0,
c.getHeight() - 20, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xffffff);
// In our code, we can overdraw the line slightly, so we clip it to the plot area.
c.setClipping();
// Add a legend box at the right side using horizontal layout. Use 10pt Arial Bold as font. Set
// the background and border color to Transparent and use line style legend key.
LegendBox b = c.addLegend(c.getWidth() - 1, 10, false, "Arial Bold", 10);
b.setBackground(Chart.Transparent);
b.setAlignment(Chart.Right);
b.setLineStyleKey();
// Set the x and y axis stems to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
c.yAxis().setLabelStyle("Arial", 10, 0x336699);
// Configure the y-axis label to be inside the plot area and above the horizontal grid lines
c.yAxis().setLabelGap(-1);
c.yAxis().setMargin(20);
c.yAxis().setLabelAlignment(1);
// Configure the x-axis labels to be to the left of the vertical grid lines
c.xAxis().setLabelAlignment(1);
//================================================================================
// Add data to chart
//================================================================================
// Draw the lines, which consists of A segments and B segments (the wrapped segments)
foreach (var dataArrays in new[] { allArraysA, allArraysB })
{
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
// The first element of dataArrays is the timeStamp, and the rest are the data.
layer.setXData(dataArrays[0]);
for (int i = 1; i < dataArrays.Length; ++i)
{
layer.addDataSet(dataArrays[i], colors[i - 1], names[i - 1]);
}
// Disable legend entries for the B lines to avoid duplication with the A lines
if (dataArrays == allArraysB)
{
layer.setLegend(Chart.NoLegend);
}
}
// The B segments contain the latest data. We add a vertical line at the latest position.
int lastIndex = allArraysB[0].Length - 1;
Mark m = c.xAxis().addMark(allArraysB[0][lastIndex], -1);
m.setMarkColor(0x0000ff, Chart.Transparent, Chart.Transparent);
m.setDrawOnTop(false);
// We also add a symbol and a label for each data series at the latest position
for (int i = 1; i < allArraysB.Length; ++i)
{
// Add the symbol
Layer layer = c.addScatterLayer(new double[] { allArraysB[0][lastIndex] }, new double[] {
allArraysB[i][lastIndex]
}, "", Chart.CircleSymbol, 9, colors[i - 1], colors[i - 1]);
layer.moveFront();
// Add the label
string label = "<*font,bgColor=" + colors[i - 1].ToString("x") + "*> {value|P4} <*/font*>";
layer.setDataLabelFormat(label);
// The label style
ChartDirector.TextBox t = layer.setDataLabelStyle("Arial Bold", 10, 0xffffff);
bool isOnLeft = allArraysB[0][lastIndex] <= timeRange / 2;
t.setAlignment(isOnLeft ? Chart.Left : Chart.Right);
t.setMargin(isOnLeft ? 5 : 0, isOnLeft ? 0 : 5, 0, 0);
}
//================================================================================
// Configure axis scale and labelling
//================================================================================
c.xAxis().setLinearScale(0, timeRange);
// For the automatic axis labels, set the minimum spacing to 75/40 pixels for the x/y axis.
c.xAxis().setTickDensity(75);
c.yAxis().setTickDensity(40);
// Set the auto-scale margin to 0.05, and the zero affinity to 0.6
c.yAxis().setAutoScale(0.05, 0.05, 0.6);
//================================================================================
// Output the chart
//================================================================================
viewer.Chart = c;
}
//public void createChart(WinChartViewer viewer, int chartIndex)
public void drawChart(WinChartViewer viewer, double[] data, int color, bool init)
{
int startIndex, endIndex;
// Get the start date and end date that are visible on the chart.
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft));
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// Extract the part of the data arrays that are visible.
DateTime[] viewPortTimeStamps = null;
double[] viewPortData = null;
if (init == true)
{
startIndex = 0;
endIndex = data.Length;
}
else
{
startIndex = (int)Math.Floor(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortStartDate)); //Real Trend
endIndex = (int)Math.Ceiling(Chart.bSearch2(timeStamps, 0, currentIndex, viewPortEndDate)); //Real Trend
}
int noOfPoints = endIndex - startIndex + 1;
viewPortTimeStamps = (DateTime[])Chart.arraySlice(timeStamps, startIndex, noOfPoints);
viewPortData = (double[])Chart.arraySlice(data, startIndex, noOfPoints);
XYChart c = new XYChart(776, 197, 0x787878, 0x787878);
/* c.setPlotArea(30, 10, c.getWidth() - 40, c.getHeight() - 50,
* 0x787878, -1, Chart.Transparent,
* c.dashLineColor(0xffffff, 0x000303), c.dashLineColor(0xffffff, 0x000303));
*/
c.setPlotArea(30, 10, c.getWidth() - 40, c.getHeight() - 50, 0x000000, 0x000000, Chart.LineColor, 0xc0c0c0, 0x000000
).setGridWidth(2, 1, 1, 1);
/* c.setPlotArea(30, 10, c.getWidth() - 40, c.getHeight() - 50, c.linearGradientColor(0, 55, 0,
* c.getHeight() - 35, 0xf5f5f5, 0x787878), -1, Chart.Transparent, 0xffffff, 0xffffff);*/
c.xAxis().setColors(0xffffff, 0xffffff, 0xffffff);
c.yAxis().setColors(0xffffff, 0xffffff, 0xffffff);
c.setClipping();
sb_d.Clear();
sb_d.AppendFormat("{{value|hh:nn:ss.f}}");
c.xAxis().setLabelFormat(sb_d.ToString());
c.setClipping();
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
layer.setXData(viewPortTimeStamps);
layer.addDataSet(viewPortData, color, "Heart");
if (currentIndex > 0)
{
c.xAxis().setDateScale(viewPortStartDate, viewPortEndDate);
}
//viewer.syncDateAxisWithViewPort("x", c.xAxis());
c.xAxis().setTickDensity(75);
c.yAxis().setTickDensity(30);
c.xAxis().setLabelStep(100);
c.xAxis().setMinTickInc(1);
viewer.Chart = c;
if (viewer.ImageMap == null)
{
viewer.ImageMap = viewer.Chart.getHTMLImageMap("", "", "");
}
}
private void drawChart(WinChartViewer viewer)
{
// get the start index that are visible on the chart
double viewPortStartIndex = viewer.getValueAtViewPort("x", viewer.ViewPortLeft);
double viewPortEndIndex = viewer.getValueAtViewPort("x", viewer.ViewPortLeft + viewer.ViewPortWidth);
// Get the array indexes that corresponds to the visible start and end
int startIndex = (int)Math.Floor(Chart.bSearch(index, viewPortStartIndex));
int endIndex = (int)Math.Ceiling(Chart.bSearch(index, viewPortEndIndex));
Console.WriteLine("port start: " + viewPortStartIndex + " port end: " + viewPortEndIndex + " start: " + startIndex + " end: " + endIndex + " index length: " + index.Length);
int noOfPoints = endIndex - startIndex + 1;
// declaration the data set
double[] viewPortDataSeriesCpu;
double[] viewPortDataSeriesGpu;
double[] viewPortDataSeriesFps;
double[] viewPortDataSeriesCmd;
double[] viewPortDataSeriesObj;
double[] viewPortDataSeriesTriangle;
double[] viewPortDataSeriesDrawTime;
double[] viewPortDataSeriesDataSize;
double[] viewPortDataSeriesIbLock;
double[] viewPortDataSeriesIbSize;
double[] viewPortDataSeriesVbLock;
double[] viewPortDataSeriesVbSize;
double[] viewPortDataSeriesParamSize;
double[] viewPortDataSeriesRemoteParamSize;
double[] viewPortDataSeriesSurLock;
double[] viewPortDataSeriesSurSize;
double[] viewPortDataSeriesTexLock;
double[] viewPortDataSeriesTexSize;
double[] viewPortDataSeriesSetTexture;
double[] viewPortDataSeriesStateBlock;
double[] viewPortDataSeriesVShaderCmd;
double[] viewPortDataSeriesVShaderConst;
double[] viewPortDataSeriesPShaderCmd;
double[] viewPortDataSeriesPShaderConst;
double[] viewPortIndex = (double[])Chart.arraySlice(index, startIndex, noOfPoints);
if (this.showCpu)
{
viewPortDataSeriesCpu = (double[])Chart.arraySlice(cpu, startIndex, noOfPoints);
}
if (this.showGpu)
{
viewPortDataSeriesGpu = (double[])Chart.arraySlice(gpu, startIndex, noOfPoints);
}
if (this.showFps)
{
viewPortDataSeriesFps = (double[])Chart.arraySlice(fps, startIndex, noOfPoints);
}
if (this.showCmd)
{
viewPortDataSeriesCmd = (double[])Chart.arraySlice(cmd, startIndex, noOfPoints);
}
if (this.showObj)
{
viewPortDataSeriesObj = (double[])Chart.arraySlice(obj, startIndex, noOfPoints);
}
if (this.showTriangle)
{
viewPortDataSeriesTriangle = (double[])Chart.arraySlice(triangle, startIndex, noOfPoints);
}
if (this.showDrawTime)
{
viewPortDataSeriesDrawTime = (double[])Chart.arraySlice(draw, startIndex, noOfPoints);
}
if (this.showDataSize)
{
viewPortDataSeriesDataSize = (double[])Chart.arraySlice(data, startIndex, noOfPoints);
}
if (this.showIbLock)
{
viewPortDataSeriesIbLock = (double[])Chart.arraySlice(ibLock, startIndex, noOfPoints);
}
if (this.showIbSize)
{
viewPortDataSeriesIbSize = (double[])Chart.arraySlice(ibSize, startIndex, noOfPoints);
}
if (this.showVbLock)
{
viewPortDataSeriesVbLock = (double[])Chart.arraySlice(vbLock, startIndex, noOfPoints);
}
if (this.showVbSize)
{
viewPortDataSeriesVbSize = (double[])Chart.arraySlice(vbSize, startIndex, noOfPoints);
}
if (this.showParamSize)
{
viewPortDataSeriesParamSize = (double[])Chart.arraySlice(parameterSize, startIndex, noOfPoints);
}
if (this.showRemoteParamSize)
{
viewPortDataSeriesRemoteParamSize = (double[])Chart.arraySlice(remoteParamSize, startIndex, noOfPoints);
}
if (this.showSurLock)
{
viewPortDataSeriesSurLock = (double[])Chart.arraySlice(surLock, startIndex, noOfPoints);
}
if (this.showSurSize)
{
viewPortDataSeriesSurSize = (double[])Chart.arraySlice(surSize, startIndex, noOfPoints);
}
if (this.showTexLock)
{
viewPortDataSeriesTexLock = (double[])Chart.arraySlice(texLock, startIndex, noOfPoints);
}
if (this.showTexSize)
{
viewPortDataSeriesTexSize = (double[])Chart.arraySlice(texSize, startIndex, noOfPoints);
}
if (this.showSetTexTime)
{
viewPortDataSeriesSetTexture = (double[])Chart.arraySlice(setTex, startIndex, noOfPoints);
}
if (this.showStateBlock)
{
viewPortDataSeriesStateBlock = (double[])Chart.arraySlice(stateBlock, startIndex, noOfPoints);
}
if (this.showVShaderCmd)
{
viewPortDataSeriesVShaderCmd = (double[])Chart.arraySlice(vShaderCmd, startIndex, noOfPoints);
}
if (this.showVShaderConst)
{
viewPortDataSeriesVShaderConst = (double[])Chart.arraySlice(vShaderConst, startIndex, noOfPoints);
}
if (this.showPShaderCmd)
{
viewPortDataSeriesPShaderCmd = (double[])Chart.arraySlice(pShaderCmd, startIndex, noOfPoints);
}
if (this.showPShaderConst)
{
viewPortDataSeriesPShaderConst = (double[])Chart.arraySlice(pShaderConst, startIndex, noOfPoints);
}
// configure overall chart apperance
XYChart c = new XYChart(820, 490);
c.setPlotArea(55, 50, c.getWidth() - 80, c.getHeight() - 85, c.linearGradientColor(0, 50, 0, c.getHeight() - 35, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xfffff);
c.setClipping();
c.addTitle(" All charactor for game", "Times New Roman Bold Italic", 10);
// Set legend icon style to use line style icon, sized for 8pt font
c.getLegend().setLineStyleKey();
c.getLegend().setFontSize(8);
//LegendBox b = c.addLegend(55, 25, false, "Arial Bold", 8);
//b.setBackground(Chart.Transparent);
//b.setLineStyleKey();
// set the axis stem to transparent
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
// add the y axixs title
c.yAxis().setTitle("chractor", "Arial Bold Italic", 10);
// add data to chart
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
layer.setXData(this.index);
/*
* layer.addDataSet(viewPortDataSeriesCpu, 0xff3333, "CPU");
* layer.addDataSet(viewPortDataSeriesGpu, 0x008800, "GPU");
* layer.addDataSet(viewPortDataSeriesFps, 0x3333cc, "FPS");
*/
if (this.showCpu)
{
layer.addDataSet(cpu, 0xff3333, "CPU");
}
if (this.showGpu)
{
layer.addDataSet(gpu, 0x008800, "GPU");
}
if (this.showFps)
{
layer.addDataSet(fps, 0x3333cc, "FPS");
}
if (this.showCmd)
{
layer.addDataSet(cmd, 0x3388cc, "CMD");
}
if (this.showObj)
{
layer.addDataSet(obj, 0x8833cc, "OBJ");
}
if (this.showTriangle)
{
layer.addDataSet(triangle, 0x333388, "TRI");
}
if (this.showDrawTime)
{
layer.addDataSet(draw, 0xff0000, "DRAW");
}
if (this.showDataSize)
{
layer.addDataSet(data, 0xff00cc, "DATA");
}
if (this.showIbLock)
{
layer.addDataSet(ibLock, 0x8888cc, "IBLOCK");
}
if (this.showIbSize)
{
layer.addDataSet(ibSize, 0x8833cc, "IBSIZE");
}
if (this.showVbLock)
{
layer.addDataSet(vbLock, 0x3333cc, "VBLOCK");
}
if (this.showVbSize)
{
layer.addDataSet(vbSize, 0x3333cc, "VBSIZE");
}
if (this.showParamSize)
{
layer.addDataSet(parameterSize, 0x3333cc, "PARAM");
}
if (this.showRemoteParamSize)
{
layer.addDataSet(remoteParamSize, 0x3333cc, "REMOTE");
}
if (this.showSurLock)
{
layer.addDataSet(surLock, 0x3333cc, "SURLOCK");
}
if (this.showSurSize)
{
layer.addDataSet(surSize, 0x3333cc, "SURSIZE");
}
if (this.showTexLock)
{
layer.addDataSet(texLock, 0x3333cc, "TEXLOCK");
}
if (this.showTexSize)
{
layer.addDataSet(texSize, 0x3333cc, "TEXSIZE");
}
if (this.showSetTexTime)
{
layer.addDataSet(setTex, 0x3333cc, "SETTEX");
}
if (this.showStateBlock)
{
layer.addDataSet(stateBlock, 0x3333cc, "STATEBLOCK");
}
if (this.showVShaderCmd)
{
layer.addDataSet(vShaderCmd, 0x3333cc, "VSC");
}
if (this.showVShaderConst)
{
layer.addDataSet(vShaderConst, 0x3333cc, "VSCONST");
}
if (this.showPShaderCmd)
{
layer.addDataSet(pShaderCmd, 0x3333cc, "PSC");
}
if (this.showPShaderConst)
{
layer.addDataSet(pShaderConst, 0x3333cc, "PSCONST");
}
// configure the axis scale and labeling
//viewer.syncDateAxisWithViewPort("x", c.xAxis());
viewer.syncLinearAxisWithViewPort("x", c.xAxis());
// If all ticks are yearly aligned, then we use "yyyy" as the label format.
//c.xAxis().setFormatCondition("align", 32);
//c.xAxis().setLabelFormat("{value|p4}");
viewer.Chart = c;
}
private void drawChart(WinChartViewer viewer)
{
// get the start index that are visible on the chart
double viewPortStartIndex = viewer.getValueAtViewPort("x", viewer.ViewPortLeft);
double viewPortEndIndex = viewer.getValueAtViewPort("x", viewer.ViewPortLeft + viewer.ViewPortWidth);
// Get the array indexes that corresponds to the visible start and end
int startIndex = 0;
int endIndex = 0;
if (showInFrame)
{
startIndex = (int)Math.Floor(Chart.bSearch(indexForFrame, viewPortStartIndex));
endIndex = (int)Math.Ceiling(Chart.bSearch(indexForFrame, viewPortEndIndex));
Console.WriteLine("port start: " + viewPortStartIndex + " port end: " + viewPortEndIndex + " start: " + startIndex + " end: " + endIndex + " index length: " + indexForFrame.Length);
}
else
{
startIndex = (int)Math.Floor(Chart.bSearch(indexForSecond, viewPortStartIndex));
endIndex = (int)Math.Ceiling(Chart.bSearch(indexForSecond, viewPortEndIndex));
Console.WriteLine("port start: " + viewPortStartIndex + " port end: " + viewPortEndIndex + " start: " + startIndex + " end: " + endIndex + " index length: " + indexForSecond.Length);
}
int noOfPoints = endIndex - startIndex + 1;
// declaration the data set
double[] viewPortDataSeriesCpuInFrame;
double[] viewPortDataSeriesGpuInFrame;
double[] viewPortDataSeriesFpsInFrame;
double[] viewPortDataSeriesFpsInSecond;
double[] viewPortDataSeriesCpuInSecond;
double[] viewPortDataSeriesGpuInSecond;
double[] viewPortIndex;
if (showInFrame)
{
viewPortIndex = (double[])Chart.arraySlice(indexForFrame, startIndex, noOfPoints);
if (this.showCpu)
{
viewPortDataSeriesCpuInFrame = (double[])Chart.arraySlice(cpuInFrame, startIndex, noOfPoints);
}
if (this.showGpu)
{
viewPortDataSeriesGpuInFrame = (double[])Chart.arraySlice(gpuInFrame, startIndex, noOfPoints);
}
if (this.showFps)
{
viewPortDataSeriesFpsInFrame = (double[])Chart.arraySlice(fpsInFrame, startIndex, noOfPoints);
}
}
else
{
viewPortIndex = (double[])Chart.arraySlice(indexForSecond, startIndex, noOfPoints);
if (this.showCpu)
{
viewPortDataSeriesCpuInSecond = (double[])Chart.arraySlice(cpuInSecond, startIndex, noOfPoints);
}
if (this.showGpu)
{
viewPortDataSeriesGpuInSecond = (double[])Chart.arraySlice(gpuInSecond, startIndex, noOfPoints);
}
if (this.showFps)
{
viewPortDataSeriesFpsInSecond = (double[])Chart.arraySlice(fpsInSecond, startIndex, noOfPoints);
}
}
// configure overall chart apperance
XYChart c = new XYChart(807, 371);
c.setPlotArea(55, 50, c.getWidth() - 80, c.getHeight() - 85, c.linearGradientColor(0, 50, 0, c.getHeight() - 35, 0xf0f6ff, 0xa0c0ff), -1, Chart.Transparent, 0xffffff, 0xfffff);
c.setClipping();
c.addTitle("Charactor for game", "Times New Roman Bold Italic", 10);
// Set legend icon style to use line style icon, sized for 8pt font
c.getLegend().setLineStyleKey();
c.getLegend().setFontSize(8);
//LegendBox b = c.addLegend(55, 25, false, "Arial Bold", 8);
//b.setBackground(Chart.Transparent);
//b.setLineStyleKey();
// set the axis stem to transparent
c.xAxis().setColors(Chart.Transparent);
c.yAxis().setColors(Chart.Transparent);
// add the y axixs title
c.yAxis().setTitle("chractor", "Arial Bold Italic", 10);
// add data to chart
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
layer.setFastLineMode();
if (this.showInFrame)
{
layer.setXData(this.indexForFrame);
}
else
{
layer.setXData(this.indexForSecond);
}
/*
* layer.addDataSet(viewPortDataSeriesCpu, 0xff3333, "CPU");
* layer.addDataSet(viewPortDataSeriesGpu, 0x008800, "GPU");
* layer.addDataSet(viewPortDataSeriesFps, 0x3333cc, "FPS");
*/
if (this.showInFrame)
{
if (this.showCpu)
{
layer.addDataSet(cpuInFrame, 0xff3333, "CPU In Frame");
}
if (this.showGpu)
{
layer.addDataSet(gpuInFrame, 0x008800, "GPU In Frame");
}
if (this.showFps)
{
layer.addDataSet(fpsInFrame, 0xcccccc, "FPS In Frame");
}
}
else
{
if (this.showCpu)
{
layer.addDataSet(cpuInSecond, 0x33cc33, "CPU In Second");
}
if (this.showGpu)
{
layer.addDataSet(gpuInSecond, 0xff8833, "GPU In Second");
}
if (this.showFps)
{
layer.addDataSet(fpsInSecond, 0xcccccc, "FPS In Second");
}
}
// configure the axis scale and labeling
//viewer.syncDateAxisWithViewPort("x", c.xAxis());
viewer.syncLinearAxisWithViewPort("x", c.xAxis());
// If all ticks are yearly aligned, then we use "yyyy" as the label format.
//c.xAxis().setFormatCondition("align", 32);
//c.xAxis().setLabelFormat("{value|p4}");
viewer.Chart = c;
}
private void drawFullChart(RazorViewPortControl vp, RazorChartViewer viewer)
{
// We need to draw a small thumbnail chart for the full data range. The simplest method is to
// simply get the full data to draw the chart. If the full data are very large (eg. millions
// of points), for such a small thumbnail chart, it is often acceptable to just retreive a
// small sample of the data.
//
// In this example, there are only around 5500 points for the 3 data series. This amount is
// not large to ChartDirector, so we simply pass all the data to ChartDirector.
RanTable r = getRandomTable();
// Get all the data from the random table
DateTime[] timeStamps = Chart.NTime(r.getCol(0));
double[] dataSeriesA = r.getCol(1);
double[] dataSeriesB = r.getCol(2);
double[] dataSeriesC = r.getCol(3);
// Create an XYChart object of size 640 x 60 pixels
XYChart c = new XYChart(640, 60);
// Set the plotarea with the same horizontal position as that in the main chart for
// alignment. The vertical position is set to equal to the chart height.
c.setPlotArea(55, 0, c.getWidth() - 80, c.getHeight() - 1, 0xc0d8ff, -1, 0x888888,
Chart.Transparent, 0xffffff);
// Set the x axis stem to transparent and the label font to 10pt Arial
c.xAxis().setColors(Chart.Transparent);
c.xAxis().setLabelStyle("Arial", 10);
// Put the x-axis labels inside the plot area by setting a negative label gap. Use
// setLabelAlignment to put the label at the right side of the tick.
c.xAxis().setLabelGap(-1);
c.xAxis().setLabelAlignment(1);
// Set the y axis stem and labels to transparent (that is, hide the labels)
c.yAxis().setColors(Chart.Transparent, Chart.Transparent);
// Add a line layer for the lines with fast line mode enabled
LineLayer layer = c.addLineLayer2();
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (0xff3333), green
// (0x008800) and blue (0x3333cc)
layer.setXData(timeStamps);
layer.addDataSet(dataSeriesA, 0xff3333);
layer.addDataSet(dataSeriesB, 0x008800);
layer.addDataSet(dataSeriesC, 0x3333cc);
// The x axis scales should reflect the full range of the view port
c.xAxis().setDateScale(viewer.getValueAtViewPort("x", 0), viewer.getValueAtViewPort("x", 1));
// For the automatic x-axis labels, set the minimum spacing to 75 pixels.
c.xAxis().setTickDensity(75);
// For the auto-scaled y-axis, as we hide the labels, we can disable axis rounding. This can
// make the axis scale fit the data tighter.
c.yAxis().setRounding(false, false);
// Output the chart
vp.Image = c.makeWebImage(Chart.PNG);
}
//
// Draw the chart
//
private void drawChart(RazorChartViewer viewer)
{
// Determine the visible x-axis range
DateTime viewPortStartDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft))
;
DateTime viewPortEndDate = Chart.NTime(viewer.getValueAtViewPort("x", viewer.ViewPortLeft +
viewer.ViewPortWidth));
// We need to get the data within the visible x-axis range. In real code, this can be by
// using a database query or some other means as specific to the application. In this demo,
// we just generate a random data table, and then select the data within the table.
RanTable r = getRandomTable();
// Select the data for the visible date range viewPortStartDate to viewPortEndDate. It is
// possible there is no data point at exactly viewPortStartDate or viewPortEndDate. In this
// case, we also need the data points that are just outside the visible date range to
// "overdraw" the line a little bit (the "overdrawn" part will be clipped to the plot area)
// In this demo, we do this by adding a one day margin to the date range when selecting the
// data.
r.selectDate(0, viewPortStartDate.AddDays(-1), viewPortEndDate.AddDays(1));
// The selected data from the random data table
DateTime[] timeStamps = Chart.NTime(r.getCol(0));
double[] dataSeriesA = r.getCol(1);
double[] dataSeriesB = r.getCol(2);
double[] dataSeriesC = r.getCol(3);
//
// Now we have obtained the data, we can plot the chart.
//
//================================================================================
// Configure overall chart appearance.
//================================================================================
// Create an XYChart object 600 x 300 pixels in size, with pale blue (f0f0ff) background,
// black (000000) rounded border, 1 pixel raised effect.
XYChart c = new XYChart(600, 300, 0xf0f0ff, 0x000000);
c.setRoundedFrame();
// Set the plotarea at (52, 60) and of size 520 x 205 pixels. Use white (ffffff) background.
// Enable both horizontal and vertical grids by setting their colors to grey (cccccc). Set
// clipping mode to clip the data lines to the plot area.
c.setPlotArea(55, 60, 520, 205, 0xffffff, -1, -1, 0xcccccc, 0xcccccc);
// As the data can lie outside the plotarea in a zoomed chart, we need to enable clipping.
c.setClipping();
// Add a top title to the chart using 15pt Times New Roman Bold Italic font, with a light
// blue (ccccff) background, black (000000) border, and a glass like raised effect.
c.addTitle("Product Line International Market Price", "Times New Roman Bold Italic", 15
).setBackground(0xccccff, 0x000000, Chart.glassEffect());
// Add a legend box at the top of the plot area with 9pt Arial Bold font with flow layout.
c.addLegend(50, 33, false, "Arial Bold", 9).setBackground(Chart.Transparent,
Chart.Transparent);
// Set axes width to 2 pixels
c.xAxis().setWidth(2);
c.yAxis().setWidth(2);
// Add a title to the y-axis
c.yAxis().setTitle("Price (USD)", "Arial Bold", 10);
//================================================================================
// Add data to chart
//================================================================================
//
// In this example, we represent the data by lines. You may modify the code below to use
// other representations (areas, scatter plot, etc).
//
// Add a line layer for the lines, using a line width of 2 pixels
LineLayer layer = c.addLineLayer2();
layer.setLineWidth(2);
// In this demo, we do not have too many data points. In real code, the chart may contain a
// lot of data points when fully zoomed out - much more than the number of horizontal pixels
// in this plot area. So it is a good idea to use fast line mode.
layer.setFastLineMode();
// Now we add the 3 data series to a line layer, using the color red (ff0000), green (00cc00)
// and blue (0000ff)
layer.setXData(timeStamps);
layer.addDataSet(dataSeriesA, 0xff0000, "Product Alpha");
layer.addDataSet(dataSeriesB, 0x00cc00, "Product Beta");
layer.addDataSet(dataSeriesC, 0x0000ff, "Product Gamma");
//================================================================================
// Configure axis scale and labelling
//================================================================================
// Set the x-axis as a date/time axis with the scale according to the view port x range.
viewer.syncDateAxisWithViewPort("x", c.xAxis());
// In this demo, we rely on ChartDirector to auto-label the axis. We ask ChartDirector to
// ensure the x-axis labels are at least 75 pixels apart to avoid too many labels.
c.xAxis().setTickDensity(75);
//================================================================================
// Output the chart
//================================================================================
// Output the chart
viewer.Image = c.makeWebImage(Chart.PNG);
// Include tool tip for the chart
viewer.ImageMap = c.getHTMLImageMap("", "",
"title='[{dataSetName}] {x|mmm dd, yyyy}: USD {value|2}'");
}