/// <summary>
/// In the tomasolu there will be a register renaming that will happen in the right back
/// as it will not wait for the register to free up but will rename one and continue the other
/// </summary>
/// <param name="instruction"></param>
/// <param name="instructions"></param>
/// <param name="functionalUnits"></param>
/// <param name="registers"></param>
protected override void ExecuteInstrution(InstructionWithStatusModel instruction, List <InstructionWithStatusModel> instructions, List <FunctionalUnitWithStatusModel> functionalUnits, List <RegisterResultModel> registers)
{
//Get the unit that the instruction is working on
var unit = functionalUnits.SingleOrDefault(item => item.WorkingInstructionID == instruction.ID);
if (--unit.Time == 0)
{
//Set the clock cycle that is completed executing on
instruction.ExecuteCompletedCycle = ClockCycle;
}
else if (unit.Time < 0)
{
unit.Time = 0;
//Get the register the instruction is working on
var register = registers.SingleOrDefault(reg => reg.InstructionReservedRegiseter.SingleOrDefault(inst => inst.InstructionId == instruction.ID) != null);
var instStatusInReg = register.InstructionReservedRegiseter.SingleOrDefault(item => item.InstructionId == instruction.ID);
//If its value is false it can not write and has to be register renames
if (!instStatusInReg.LastIssued)
{
//Then rename the target register of the register renameing process
//This way will end the WAW hazard
instruction.TargetRegistery = "R1";
}
//Always right back the value after the instruction finishs executing
instruction.WriteBackCycle = ClockCycle;
ClearUnitFunction(functionalUnits.SingleOrDefault(fcn => fcn.WorkingInstructionID == instruction.ID), registers);
}
}
/// <summary>
/// Compares between the two instructions
/// +1 for evert correct value
/// -1 for every unlike value
/// -0.25 for every null value that has been set by the student
/// </summary>
/// <param name="computerSolution"></param>
/// <param name="studentSolution"></param>
/// <returns>The student mark</returns>
public static float CompareInstructions(this InstructionWithStatusModel computerSolution, InstructionWithStatusModel studentSolution)
{
//The student mark
float mark = 0;
//Correct each filed
mark += SharedMethods.CompareFiledsAndGetMark(computerSolution.IssueCycle, studentSolution.IssueCycle);
mark += SharedMethods.CompareFiledsAndGetMark(computerSolution.ReadCycle, studentSolution.ReadCycle);
mark += SharedMethods.CompareFiledsAndGetMark(computerSolution.ExecuteCompletedCycle, studentSolution.ExecuteCompletedCycle);
mark += SharedMethods.CompareFiledsAndGetMark(computerSolution.WriteBackCycle, studentSolution.WriteBackCycle);
return(mark);
}
/// <summary>
/// Checks if all the hazerds are gone and sets the instruction into issue
/// </summary>
/// <param name="instruction">The instruction that we want to issue</param>
/// <returns></returns>
protected bool IssueIfApproved(InstructionWithStatusModel instruction, List <FunctionalUnitWithStatusModel> functionalUnits, List <RegisterResultModel> registers)
{
foreach (var unit in functionalUnits)
{
if (unit.Function.TryGetValue(instruction.Name, out bool value))
{
//Issuee only when functional unit is not busy structural hazard and...
if (!unit.IsBusy)
{
//The target register to write in is free WAW hazard
RegisterResultModel registerToTarget;
if (instruction.Name == FunctionsTypes.SD)
{
registerToTarget = registers.SingleOrDefault(reg => reg.Name == instruction.SourceRegistery01);
}
else
{
registerToTarget = registers.SingleOrDefault(reg => reg.Name == instruction.TargetRegistery);
}
instruction.IssueCycle = ClockCycle;
//Set it to busy
unit.IsBusy = true;
//Assign it the operation values
unit.WorkingInstructionID = instruction.ID;
unit.Operation = instruction.Name.ToString();
unit.SourceRegistery01 = instruction.SourceRegistery01;
unit.SourceRegistery02 = instruction.SourceRegistery02;
unit.TargetRegistery = instruction.TargetRegistery;
var operationOnSource01 = registers.SingleOrDefault(reg => reg.Name == instruction.SourceRegistery01);
var operationOnSource02 = registers.SingleOrDefault(reg => reg.Name == instruction.SourceRegistery02);
//The is null for the load as it loads from memory
if (operationOnSource01 is null || !operationOnSource01.IsBusy)
{
unit.IsSource01Ready = true;
}
else
{
unit.IsSource01Ready = false;
unit.WaitingOperationForSource01 = operationOnSource01.Operation;
}
if (operationOnSource02 is null)
{
unit.IsSource02Ready = false;
}
else if (!operationOnSource02.IsBusy)
{
unit.IsSource02Ready = true;
}
else
{
unit.IsSource02Ready = false;
unit.WaitingOperationForSource02 = operationOnSource02.Operation;
}
//Set the register as busy
registerToTarget.Operation = unit.Operation == "LD" ? string.Format("F[{0}]", unit.SourceRegistery01) : string.Format("F[{0}]", unit.Name);
registerToTarget.IsBusy = true;
if (registerToTarget.InstructionReservedRegiseter.Any())
{
registerToTarget.InstructionReservedRegiseter.LastOrDefault().LastIssued = false;
}
//Add it to the reserved instructions
registerToTarget.InstructionReservedRegiseter.Add(new InstructionRegisterReservationModel
{
InstructionId = instruction.ID,
LastIssued = true
});
return(true);
}
}
}
