public void InsertPointAtIntersection2(ref IPolyline pPolyline, IGeometry pOther, double hmgetal)
{
bool SplitHappened = false;
int newPartIndex = 0;
int newSegmentIndex = 0;
int index = 0;
IPoint Point = null;
IPoint HitPoint = new ESRI.ArcGIS.Geometry.Point();
double hitDistance = 0;
int hitPartIndex = 0;
int hitSegmentIndex = 0;
bool bRightSide = false;
ITopologicalOperator5 pTopoOpOther = pOther as ITopologicalOperator5;
pTopoOpOther.Simplify();
ITopologicalOperator6 pTopoOpPolyline = pPolyline as ITopologicalOperator6;
IGeometry pGeomResult = pTopoOpPolyline.IntersectEx(pOther, false, esriGeometryDimension.esriGeometry0Dimension);
if ((pGeomResult is IPointCollection) && ((pGeomResult as IPointCollection).PointCount > 0))
{
for (int i = 0; i < (pGeomResult as IPointCollection).PointCount; i++)
{
(pPolyline as IHitTest).HitTest(
(pGeomResult as IPointCollection).get_Point(i),
10,
esriGeometryHitPartType.esriGeometryPartBoundary,
HitPoint,
ref hitDistance,
ref hitPartIndex,
ref hitSegmentIndex,
ref bRightSide);
index = 0;
for (int j = 0; j < hitPartIndex; j++)
{
index += ((pPolyline as IGeometryCollection).get_Geometry(j) as IPointCollection).PointCount;
}
index += hitSegmentIndex;
HitPoint.M = hmgetal;
(pPolyline as IPointCollection).AddPoint(HitPoint, after: index);
}
}
(pPolyline as ITopologicalOperator2).IsKnownSimple_2 = false;
(pPolyline as IPolyline4).SimplifyEx(true);
}
private void addToNeighboringFeature(ref HashSet <IPolygon4>[] polys)
{
foreach (IPolygon4 geoS in polys[0])
{
//polys[0].
if (geoS.IsEmpty)
{
continue;
}
else
{
bool bTest = false;
foreach (IPolygon4 geoB in polys[1])
{
if (geoB.IsEmpty)
{
continue;
}
else
{
IRelationalOperator2 ro2 = (IRelationalOperator2)geoB;
if (!ro2.Disjoint(geoS))
{
try
{
ITopologicalOperator5 tp6 = (ITopologicalOperator5)geoB;
tp6.Union(geoS);
bTest = true;
break;
}
catch (Exception e)
{
Console.WriteLine(e.ToString());
}
}
}
}
}
}
}
private void btnOK_Click(object sender, EventArgs e)
{
IFeature pAttributeFeature = default(IFeature);
ISubtypes pSubtypes = default(ISubtypes);
ArrayList colAttributes = null;
IFeature pCurFeature = default(IFeature);
IFeature pNewFeature = default(IFeature);
IGeometry pCurGeom = default(IGeometry);
IGeometry pTmpGeom = default(IGeometry);
ITopologicalOperator5 pTopoOperator = default(ITopologicalOperator5);
IRowSubtypes pOutRSType = default(IRowSubtypes);
IFields pFlds = default(IFields);
IField pFld = default(IField);
IDomain pDomain = default(IDomain);
IGeometryCollection pGeomColl = default(IGeometryCollection);
IInvalidArea pRefresh = null;
IComplexEdgeFeature pCEF = null;
IMap pMap = null;
try
{
long lGTotalVal = 0;
int lSubTypeCode = 0;
string strOID = null;
int intOID = -1;
int i, j;
//Screen.MousePointer = vbHourglass
//The Next button doesn't get enabled until at least 1 FC is selected, but just in case...
if (lstMergeFeatures.Items.Count == 0)
{
MessageBox.Show(A4LGSharedFunctions.Localizer.GetString("SlctOneFtr"));
return;
}
//For Next loop which iterates through the array populating colSelClasses
//This is for when I implement selecting multiple feature classes from the listbox....
for (i = 0; i <= lstMergeFeatures.Items.Count - 1; i++)
{
if (lstMergeFeatures.Items[i].Selected)
{
strOID = lstMergeFeatures.Items[i].Text;
intOID = Convert.ToInt32(strOID);
break; // TODO: might not be correct. Was : Exit For
}
}
if (strOID == null)
{
MessageBox.Show(A4LGSharedFunctions.Localizer.GetString("SlctMainFtr"));
return;
}
//Get the field values of the selected feature for use later
pAttributeFeature = (IFeature)m_colFeatures[strOID];
colAttributes = new ArrayList();
for (i = 0; i < pAttributeFeature.Fields.FieldCount; i++)
{
colAttributes.Add(pAttributeFeature.get_Value(i).ToString());
}
pSubtypes = (ISubtypes)m_FeatLay.FeatureClass;
if (pSubtypes.HasSubtype)
{
lSubTypeCode = (int)pAttributeFeature.get_Value(pSubtypes.SubtypeFieldIndex);
}
else
{
lSubTypeCode = 0;
}
//If the features being merged and the target layer are the same FC and if that FC has subtypes, get the subtype code of the selected feature or target layer
//If not, get the default
//pSubtypes = m_pFC;
//if pSubtypes.HasSubtype Then
// lSubTypeCode = m_lSubtype
//End If
//start edit operation
m_editor.StartOperation();
//pEnumFeature = m_pEditor.EditSelection
//pEnumFeature.Reset
//create a new feature to be the merge feature
//pNFC = m_pFC 'QI
//Create the new feature
pNewFeature = m_FeatLay.FeatureClass.CreateFeature();
//create the new geometry.
//initialize the default values for the new feature
pOutRSType = (IRowSubtypes)pNewFeature; //Set the RowSubtypes to the NewFeature
//if (lSubTypeCode <> 0 )
pOutRSType.SubtypeCode = lSubTypeCode; //If there's a subtype code, set it
//End If
pOutRSType.InitDefaultValues(); //Init the Default values for the feature
pFlds = m_FeatLay.FeatureClass.Fields;
//Loop until we've gone through all the selected features (pCurFeature)
i = 0;
IList <MergeSplitFlds> pFldsNames = new List <MergeSplitFlds>();
if (m_Config != null)
{
if (m_Config.Count > 0)
{
if (m_Config[0] != null)
{
if (m_Config[0].Fields != null)
{
foreach (A4LGSharedFunctions.Field FldNam in m_Config[0].Fields)
{
int idx = Globals.GetFieldIndex(pFlds, FldNam.Name);
if (idx > -1)
{
try
{
pFldsNames.Add(new MergeSplitFlds(FldNam.Name, idx, "", FldNam.MergeRule, FldNam.SplitRule));
}
catch { }
}
}
}
}
}
}
foreach (string ky in m_colFeatures.Keys)
{
//}
//for (i = 0; i < m_colFeatures.Count; i++)
//{
pCurFeature = (IFeature)m_colFeatures[ky];
if (pFldsNames != null)
{
foreach (MergeSplitFlds FldNam in pFldsNames)
{
string testVal = pCurFeature.get_Value(FldNam.FieldIndex).ToString();
//if (Globals.IsNumeric(testVal))
//{
// FldNam.Value = FldNam.Value + Convert.ToDouble(testVal);
//}
switch (FldNam.MergeType.ToUpper())
{
case "MAX":
if (FldNam.Value == "")
{
FldNam.Value = testVal;
}
else
{
if (Convert.ToDouble(FldNam.Value) < Convert.ToDouble(testVal))
{
FldNam.Value = testVal;
}
}
break;
case "MIN":
if (FldNam.Value == "")
{
FldNam.Value = testVal;
}
else
{
if (Convert.ToDouble(FldNam.Value) > Convert.ToDouble(testVal))
{
FldNam.Value = testVal;
}
}
break;
case "SUM":
if (FldNam.Value == "")
{
FldNam.Value = testVal;
}
else
{
FldNam.Value += Convert.ToDouble(FldNam.Value) + Convert.ToDouble(testVal);
}
break;
case "AVERAGE":
if (FldNam.Value == "")
{
FldNam.Value = testVal;
}
else
{
FldNam.Value += Convert.ToDouble(FldNam.Value) + Convert.ToDouble(testVal);
}
FldNam.AvgCount++;
break;
case "CONCAT":
if (FldNam.Value.Contains(testVal.ToString() + ConcatDelim))
{
}
else if (FldNam.Value.Contains(ConcatDelim + testVal.ToString()))
{
}
else
{
if (FldNam.Value == "")
{
FldNam.Value = testVal.ToString();
}
else
{
FldNam.Value += ConcatDelim + testVal.ToString();
}
}
break;
default:
break;
}
}
}
//get the geometry of the current feature, if it's the first feature, set it to pTmpGeom
//Otherwise, pTmpGeom is already set so Union the Geom of this feature with pTmpGeom
//And set that equal to the new pTmpGeom......
pCurGeom = pCurFeature.ShapeCopy;
if (i == 0)
{
pTmpGeom = pCurGeom;
pTopoOperator = (ESRI.ArcGIS.Geometry.ITopologicalOperator5)pTmpGeom;
pTopoOperator.IsKnownSimple_2 = false; //051710
pTopoOperator.Simplify(); // 051710
}
else
{
//Simplify the just obtained OtherPolyLine
pTopoOperator = (ESRI.ArcGIS.Geometry.ITopologicalOperator5)pCurGeom;//051710
pTopoOperator.IsKnownSimple_2 = false;
pTopoOperator.Simplify();
//Reset the pTopoOp to pNewPolyLine in prep for the union
pTopoOperator = (ESRI.ArcGIS.Geometry.ITopologicalOperator5)pTmpGeom;
pTmpGeom = pTopoOperator.Union(pCurGeom);
//Simplify the resulting New Line
pTopoOperator = (ESRI.ArcGIS.Geometry.ITopologicalOperator5)pTmpGeom;
pTopoOperator.IsKnownSimple_2 = false;
pTopoOperator.Simplify();
//pTopoOperator = (ITopologicalOperator5)pTmpGeom;
//pTopoOperator.Simplify();
//pOutputGeometry = pTopoOperator.Union(pCurGeom);
//pTopoOperator.Simplify();
//pTmpGeom = pOutputGeometry;
//pTopoOperator.SimplifyAsFeature();
//pOutputGeometry = pTopoOperator.UnionEx(pCurGeom,true);
//pTopoOperator.SimplifyAsFeature();
//pTmpGeom = pOutputGeometry;
//pTopoOperator.Simplify();
//pOutputGeometry = pTopoOperator.Union(pCurGeom);
//pTmpGeom = pOutputGeometry;
}
//now go through each field, if it has a domain associated with it, then evaluate the merge policy...
//If not domain, then grab the value from the selected feature
for (j = 0; j < pFlds.FieldCount; j++)
{
pFld = pFlds.get_Field(j);
pDomain = pSubtypes.get_Domain(lSubTypeCode, pFld.Name);
if (pDomain != null && pFld.DefaultValue != null)
{
if (pDomain.MergePolicy == esriMergePolicyType.esriMPTSumValues)
{
//if (lCount == 1)
// pNewFeature.set_Value(j, pCurFeature.get_Value(j));
//else
if (pNewFeature.get_Value(j) != null && pCurFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()) && Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (double)pNewFeature.get_Value(j) + (double)pCurFeature.get_Value(j));
}
else if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (double)pNewFeature.get_Value(j));
}
else if (Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (double)pCurFeature.get_Value(j));
}
}
else if (pNewFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (double)pNewFeature.get_Value(j));
}
}
else if (pCurFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (double)pCurFeature.get_Value(j));
}
}
else
{
}
}
else if (pDomain.MergePolicy == esriMergePolicyType.esriMPTAreaWeighted)
{
if (pNewFeature.get_Value(j) != null && pCurFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()) && Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (Double)pNewFeature.get_Value(j) + ((Double)pCurFeature.get_Value(j) * (Globals.GetGeometryLength(pCurFeature) / lGTotalVal)));
}
else if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (Double)pNewFeature.get_Value(j) * (Globals.GetGeometryLength(pCurFeature) / lGTotalVal));
}
else if (Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (Double)pCurFeature.get_Value(j) * (Globals.GetGeometryLength(pCurFeature) / lGTotalVal));
}
}
else if (pNewFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pNewFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (Double)pNewFeature.get_Value(j) * (Globals.GetGeometryLength(pCurFeature) / lGTotalVal));
}
}
else if (pCurFeature.get_Value(j) != null)
{
if (Globals.IsNumeric(pCurFeature.get_Value(j).ToString()))
{
pNewFeature.set_Value(j, (Double)pCurFeature.get_Value(j) * (Globals.GetGeometryLength(pCurFeature) / lGTotalVal));
}
}
else
{
}
}
else if (pCurFeature.OID == pAttributeFeature.OID)
{
try
{
pNewFeature.set_Value(j, pCurFeature.get_Value(j));
}
catch
{ }
}
}
else
if (pCurFeature.OID == intOID)
{
//Set the field values from the selected feature; ignore Subtype, non-editable and Shape field
if (pFld.Editable == true && pSubtypes.SubtypeFieldIndex != j && m_FeatLay.FeatureClass.ShapeFieldName.ToUpper() != pFld.Name.ToUpper())
{
//if (colAttributes[j] != null)
//{
try
{
pNewFeature.set_Value(j, colAttributes[j]);
}
catch { }
// }
}
}
}
pCurFeature.Delete(); //delete the feature
i++;
}
//Check if the merged geometry is multi-part. If so, raise an error and abort
//Multipart geometries are not supported in the geometric network.
pGeomColl = (IGeometryCollection)pTmpGeom;
if (pGeomColl.GeometryCount > 1)
{
m_editor.AbortOperation();
MessageBox.Show(A4LGSharedFunctions.Localizer.GetString("SlctOneFtr"), A4LGSharedFunctions.Localizer.GetString("ErrorOn") + A4LGSharedFunctions.Localizer.GetString("MergeOprt_4"));
this.Close();
return;
}
pNewFeature.Shape = pTmpGeom;
pNewFeature.Store();
if (m_FeatLay.FeatureClass.FeatureType == esriFeatureType.esriFTComplexEdge)
{
pCEF = (IComplexEdgeFeature)pNewFeature;
pCEF.ConnectAtIntermediateVertices();
}
if (chkMergeElevationData.Checked)
{
if (pFldsNames != null)
{
foreach (MergeSplitFlds FldNam in pFldsNames)
{
if (FldNam.MergeType.ToUpper() == "Average".ToUpper())
{
FldNam.Value = (Convert.ToDouble(FldNam.Value) / FldNam.AvgCount).ToString();
}
try
{
pNewFeature.set_Value(FldNam.FieldIndex, FldNam.Value);
}
catch
{
}
}
}
}
//finish edit operation
m_editor.StopOperation(A4LGSharedFunctions.Localizer.GetString("MergeOprt_4"));
//refresh features
pRefresh = new InvalidArea();
pRefresh.Display = m_editor.Display;
pRefresh.Add(pNewFeature);
pRefresh.Invalidate(-2);
// 'select new feature
pMap = m_editor.Map;
pMap.ClearSelection();
pMap.SelectFeature((ILayer)m_FeatLay, pNewFeature);
this.Close();
}
catch (Exception ex)
{
if (ex.ToString().ToString().Contains("Key cannot be null"))
{
MessageBox.Show(A4LGSharedFunctions.Localizer.GetString("ErrorOn") + A4LGSharedFunctions.Localizer.GetString("MergeOprt_5") + "\r\n" + A4LGSharedFunctions.Localizer.GetString("MergeOprt_6"));
}
else
{
MessageBox.Show(A4LGSharedFunctions.Localizer.GetString("ErrorOn") + A4LGSharedFunctions.Localizer.GetString("MergeOprt_5") + "\r\n" + ex.ToString());
}
try
{
//finish edit operation
m_editor.StopOperation(A4LGSharedFunctions.Localizer.GetString("MergeOprt_4"));
}
catch
{ }
this.Close();
}
finally
{
pAttributeFeature = null;
pSubtypes = null;
colAttributes = null;
pCurFeature = null;
pNewFeature = null;
pCurGeom = null;
pTmpGeom = null;
pTopoOperator = null;
pOutRSType = null;
pFlds = null;
pFld = null;
pDomain = null;
pGeomColl = null;
pRefresh = null;
pCEF = null;
pMap = null;
}
}
protected override void OnMouseDown(MouseEventArgs arg)
{
IFeatureLayer pPointLayer = null;
IFeatureLayer pLineLayer = null;
IArray pParcelLayers = null;
IFeatureLayer pControlLayer = null;
IFeatureLayer pLinePointLayer = null;
double dXYTol = 0.003;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
//first get the extension
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
FabricUTILS.ExecuteCommand(m_CommUID);
MessageBox.Show("This tool cannot be used when there is an open parcel, construction, or job.\r\nPlease complete or discard the open items, and try again.");
return;
}
ICadastralFabric pCadFabric = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
else
{
FabricUTILS.ExecuteCommand(m_CommUID);
MessageBox.Show("This tool works on a parcel fabric in an edit session.\r\nPlease start editing and try again.");
return;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(ArcMap.Document.ActiveView.FocusMap, out pCadFabric))
{
FabricUTILS.ExecuteCommand(m_CommUID);
MessageBox.Show("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IGeoDataset pGeoDS = (IGeoDataset)pCadFabric;
ISpatialReferenceTolerance pSpatRefTol = (ISpatialReferenceTolerance)pGeoDS.SpatialReference;
if (pSpatRefTol.XYToleranceValid == esriSRToleranceEnum.esriSRToleranceOK)
{
dXYTol = pSpatRefTol.XYTolerance;
}
IMouseCursor pMouseCursor = null;
ISpatialFilter pSpatFilt = null; //spatial filter query hinging off the dragged rectangle selection
IQueryFilter pQuFilter = null; //used for the non-spatial query for radial lines, as they have no geometry
IRubberBand2 pRubberRect = null;
IGeometryBag pGeomBag = null;
ITopologicalOperator5 pUnionedPolyine = null;
IPolygon pBufferedToolSelectGeometry = null; //geometry used to search for parents
IFIDSet pLineFIDs = null; //the FIDSet used to collect the lines that'll be deleted
IFIDSet pPointFIDs = null; // the FIDSet used to collect the points that'll be deleted
IFIDSet pLinePointFIDs = null; // the FIDSet used to collect the line-points that'll be deleted
List <int> pDeletedLinesPoints = new List <int>(); //list used to stage the ids for points that are referenced by lines
List <int> pUsedPoints = new List <int>(); //list used to collect pointids that are referenced by existing lines
List <int> CtrPointIDList = new List <int>(); //list for collecting the ids of center points
List <int> pParcelsList = new List <int>(); //used only to avoid adding duplicates to IN clause string for, based on ties to radial lines
List <int> pOrphanPointsList = new List <int>(); //list of orphan points defined from radial ines
List <int> pPointsInsideBoxList = new List <int>(); //list of parcels that exist and that intersect the drag-box
List <string> sFromToPair = new List <string>(); //list of from/to pairs for manging line points
List <int> pLineToParcelIDRef = new List <int>(); //list of parcel id refs stored on lines
IInvalidArea3 pInvArea = null;
IFeatureClass pLines = null;
IFeatureClass pPoints = null;
IFeatureClass pParcels = null;
IFeatureClass pLinePoints = null;
IWorkspace pWS = null;
try
{
#region define the rubber envelope geometry
pRubberRect = new RubberEnvelopeClass();
IGeometry ToolSelectEnvelope = pRubberRect.TrackNew(ArcMap.Document.ActiveView.ScreenDisplay, null);
if (ToolSelectEnvelope == null)
{
return;
}
ISegmentCollection pSegmentColl = new PolygonClass();
pSegmentColl.SetRectangle(ToolSelectEnvelope.Envelope);
IPolygon ToolSelectGeometry = (IPolygon)pSegmentColl;
if (pCadFabric == null)
{
return;
}
pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
#endregion
FabricUTILS.GetFabricSubLayersFromFabric(ArcMap.Document.ActiveView.FocusMap, pCadFabric,
out pPointLayer, out pLineLayer, out pParcelLayers, out pControlLayer,
out pLinePointLayer);
#region get tables and field indexes
pLines = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pPoints = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pParcels = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinePoints = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
string sPref = "";
string sSuff = "";
int iCtrPtFldIDX = pLines.FindField("CENTERPOINTID");
int iFromPtFldIDX = pLines.FindField("FROMPOINTID");
int iToPtFldIDX = pLines.FindField("TOPOINTID");
int iCatFldIDX = pLines.FindField("CATEGORY");
int iParcelIDX = pLines.FindField("PARCELID");
int iDistanceIDX = pLines.FindField("DISTANCE");
pWS = pLines.FeatureDataset.Workspace;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
pSpatFilt = new SpatialFilterClass();
pSpatFilt.SpatialRel = esriSpatialRelEnum.esriSpatialRelIntersects;
pSpatFilt.Geometry = ToolSelectGeometry;
#endregion
#region center point
//need to make sure that center points are correctly handled for cases where the center point
//is inside the select box, but the curve itself is not. The following is used to build an
//IN CLAUSE for All the center points that are found within the tool's select geometry.
int iIsCtrPtIDX = pPoints.FindField("CENTERPOINT");
int iCount = 0;
int iCntCtrPoint = 0;
string sCtrPntIDList1 = "";
IFeatureCursor pFeatCursPoints = pPoints.Search(pSpatFilt, false);
IFeature pFeat7 = pFeatCursPoints.NextFeature();
while (pFeat7 != null)
{
iCount++;
int iVal = -1;
object Attr_val = pFeat7.get_Value(iIsCtrPtIDX);
if (Attr_val != DBNull.Value)
{
iVal = Convert.ToInt32(pFeat7.get_Value(iIsCtrPtIDX));
}
if (iVal == 1)
{
if (sCtrPntIDList1.Trim() == "")
{
sCtrPntIDList1 += pFeat7.OID.ToString();
}
else
{
sCtrPntIDList1 += "," + pFeat7.OID.ToString();
}
iCntCtrPoint++;
}
pPointsInsideBoxList.Add(pFeat7.OID); //used to check for orphan linepoints
pOrphanPointsList.Add(pFeat7.OID); //this gets whittled down till only "pure" orphan points remain
Marshal.ReleaseComObject(pFeat7);
pFeat7 = pFeatCursPoints.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursPoints);
#endregion
#region create convex hull of lines
//get the lines that intersect the search box and build a
//polygon search geometry being the convex hull of those lines.
IFeatureCursor pFeatCursLines = pLines.Search(pSpatFilt, false);
pGeomBag = new GeometryBagClass();
IGeometryCollection pGeomColl = (IGeometryCollection)pGeomBag;
IFeature pFeat1 = pFeatCursLines.NextFeature();
m_sDebug = "Add lines to Geometry Collection.";
string sParcelRefOnLines = "";
object missing = Type.Missing;
while (pFeat1 != null)
{
int iVal = (int)pFeat1.get_Value(iFromPtFldIDX);
string sFromTo = iVal.ToString() + ":";
if (pOrphanPointsList.Contains(iVal)) //Does this need to be done...will remove fail if it's not there?
{
pOrphanPointsList.Remove(iVal); //does this need to be in the if block?
}
iVal = (int)pFeat1.get_Value(iToPtFldIDX);
sFromTo += iVal.ToString();
if (pOrphanPointsList.Contains(iVal))
{
pOrphanPointsList.Remove(iVal);
}
sFromToPair.Add(sFromTo);
pGeomColl.AddGeometry(pFeat1.ShapeCopy, missing, missing);
if (sParcelRefOnLines.Trim() == "")
{
sParcelRefOnLines = pFeat1.get_Value(iParcelIDX).ToString();
}
else
{
sParcelRefOnLines += "," + pFeat1.get_Value(iParcelIDX).ToString();
}
Marshal.ReleaseComObject(pFeat1);
pFeat1 = pFeatCursLines.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursLines);
#endregion
#region Add Center Points for curves outside map extent
if (iCntCtrPoint > 999)
{
throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine +
"Please try again, by selecting fewer fabric lines and points. (More than 1000 center points returned.)");
}
//If there is no line geometry found, and there are also no points found, then nothing to do...
if (pGeomColl.GeometryCount == 0 && iCount == 0)
{
return;
}
//Radial lines have no geometry so there is a special treatment for those;
//that special treatment takes two forms,
//1. if a circular arc is selected and it turns out that it is an orphan line, then we
//need to take down its radial lines, and its center point as well.
//2. if a center point is selected, we need to check if it's an orphan, by searching for its parent.
//The parent parcel can easily be well beyond the query rectangle, so the original
//search rectangle is buffered by the largest found radius distance, to make sure that all
//parent parcels are "find-able."
//The radial lines themselves are also needed; Get the radial lines from the Center Points
//CtrPt is always TO point, so find lines CATEGORY = 4 AND TOPOINT IN ()
string sRadialLineListParcelID = "";
string sRadialLinesID = "";
string sRadialLinePoints = "";
double dRadiusBuff = 0;
pQuFilter = new QueryFilterClass();
//Find all the radial lines based on the search query
if (sCtrPntIDList1.Trim() != "")
{
pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + ")";
//add all the *references* to Parcel ids for the radial lines,
//and add the ID's of the lines
IFeatureCursor pFeatCursLines8 = pLines.Search(pQuFilter, false);
IFeature pFeat8 = pFeatCursLines8.NextFeature();
while (pFeat8 != null)
{
object Attr_val = pFeat8.get_Value(iDistanceIDX);
double dVal = 0;
if (Attr_val != DBNull.Value)
{
dVal = Convert.ToDouble(Attr_val);
}
dRadiusBuff = dRadiusBuff > dVal ? dRadiusBuff : dVal;
int iVal = Convert.ToInt32(pFeat8.get_Value(iParcelIDX));
if (!pParcelsList.Contains(iVal))
{
if (sRadialLineListParcelID.Trim() == "")
{
sRadialLineListParcelID += Convert.ToString(iVal);
}
else
{
sRadialLineListParcelID += "," + Convert.ToString(iVal);
}
}
pParcelsList.Add(iVal);
//pOrphanPointsList is used for "Pure Orphan point" detection
//meaning that these are points that do not have ANY line, not even an orphan line.
iVal = (int)pFeat8.get_Value(iFromPtFldIDX);
if (pOrphanPointsList.Contains(iVal))
{
pOrphanPointsList.Remove(iVal);
}
iVal = (int)pFeat8.get_Value(iToPtFldIDX);
if (pOrphanPointsList.Contains(iVal))
{
pOrphanPointsList.Remove(iVal);
}
if (sRadialLinesID.Trim() == "")
{
sRadialLinesID += Convert.ToString(iVal);
}
else
{
sRadialLinesID += "," + Convert.ToString(iVal);
}
//Add from point to list
if (sRadialLinePoints.Trim() == "")
{
sRadialLinePoints += Convert.ToString(pFeat8.get_Value(iFromPtFldIDX));
}
else
{
sRadialLinePoints += "," + Convert.ToString(pFeat8.get_Value(iFromPtFldIDX));
}
//Add To point to list
sRadialLinePoints += "," + Convert.ToString(pFeat8.get_Value(iToPtFldIDX));
Marshal.ReleaseComObject(pFeat8);
pFeat8 = pFeatCursLines8.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursLines8);
//create a polygon goeometry that is a buffer of the selection rectangle expanded
//to the greatest radius of all the radial lines found.
ITopologicalOperator topologicalOperator = (ITopologicalOperator)ToolSelectGeometry;
pBufferedToolSelectGeometry = topologicalOperator.Buffer(dRadiusBuff) as IPolygon;
}
else
{
pQuFilter.WhereClause = "";
}
#endregion
#region OrphanLines
if (pGeomColl.GeometryCount != 0)
{
pUnionedPolyine = new PolylineClass();
pUnionedPolyine.ConstructUnion((IEnumGeometry)pGeomBag);
ITopologicalOperator pTopoOp = (ITopologicalOperator)pUnionedPolyine;
IGeometry pConvexHull = pTopoOp.ConvexHull();
//With this convex hull, do a small buffer,
//theis search geometry is used as a spatial query on the parcel polygons
//and also on the parcel lines, to build IN Clauses
pTopoOp = (ITopologicalOperator)pConvexHull;
IGeometry pBufferedConvexHull = pTopoOp.Buffer(10 * dXYTol);
if (pBufferedToolSelectGeometry != null)
{
pTopoOp = (ITopologicalOperator)pBufferedToolSelectGeometry;
IGeometry pUnionPolygon = pTopoOp.Union(pBufferedConvexHull);
pSpatFilt.Geometry = pUnionPolygon;
}
else
{
pSpatFilt.Geometry = pBufferedConvexHull;
}
}
else
{
if (pQuFilter.WhereClause.Trim() == "" && pBufferedToolSelectGeometry == null)
{
pSpatFilt.Geometry = ToolSelectGeometry;
}
else
{
pSpatFilt.Geometry = pBufferedToolSelectGeometry;
}
}
IColor pColor = new RgbColorClass();
pColor.RGB = System.Drawing.Color.Blue.ToArgb();
IScreenDisplay pScreenDisplay = ArcMap.Document.ActiveView.ScreenDisplay;
FabricUTILS.FlashGeometry(pSpatFilt.Geometry, pScreenDisplay, pColor, 5, 100);
pSpatFilt.SearchOrder = esriSearchOrder.esriSearchOrderSpatial;
m_sDebug = "Searching Parcels table.";
pInvArea = new InvalidAreaClass();
IFeatureCursor pFeatCursParcels = pParcels.Search(pSpatFilt, false);
IFeature pFeat2 = pFeatCursParcels.NextFeature();
string sParcelIDList = "";
iCount = 0;
//create the "NOT IN" CLAUSE for parcels that exist in the DB and that are within the search area
//Will be used as a search on lines to get the Orphan Lines
while (pFeat2 != null)
{
iCount++;
if (sParcelIDList.Trim() == "")
{
sParcelIDList += pFeat2.OID.ToString();
}
else
{
sParcelIDList += "," + pFeat2.OID.ToString();
}
Marshal.ReleaseComObject(pFeat2);
if (iCount > 999)
{
break;
}
pFeat2 = pFeatCursParcels.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursParcels);
//if we have more than 999 in clause tokens, there will be problems on Oracle.
//Since this is an interactive tool, we expect it not to be used on a large amount of data.
//for this reason, the following message is displayed if more than 999 parcels are returned in this query.
//TODO: for the future this can be made to work on larger sets of data.
if (iCount > 999)
{
throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine +
"Please try again, by selecting fewer fabric lines and points. (More than 1000 parcels returned.)");
}
m_sDebug = "Building the used points list.";
//This first pass contains all references to points found within the parent parcel search buffer
//Later, points are removed from this list
IFeatureCursor pFeatCursLargerLineSet = pLines.Search(pSpatFilt, false);
IFeature pFeat3 = pFeatCursLargerLineSet.NextFeature();
while (pFeat3 != null)
{
iCount++;
object Attr_val = pFeat3.get_Value(iCtrPtFldIDX);
if (Attr_val != DBNull.Value)
{
pUsedPoints.Add(Convert.ToInt32(Attr_val)); //add center point
}
int iVal = (int)pFeat3.get_Value(iFromPtFldIDX);
pUsedPoints.Add(iVal);//add from point
iVal = (int)pFeat3.get_Value(iToPtFldIDX);
pUsedPoints.Add(iVal);//add to point
Marshal.ReleaseComObject(pFeat3);
pFeat3 = pFeatCursLargerLineSet.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursLargerLineSet);
//pUsedPoints list is at this stage, references to points for all lines found within the search area.
//use the IN clause of the parcel ids to search for lines within
//the original search box, and that are also orphans that do not have a parent parcel.
pSpatFilt.WhereClause = "";
pSpatFilt.Geometry = ToolSelectGeometry;
pSpatFilt.SpatialRel = esriSpatialRelEnum.esriSpatialRelIntersects;
pSpatFilt.SearchOrder = esriSearchOrder.esriSearchOrderSpatial;
IFeatureCursor pFeatCursor = null;
if (pGeomColl.GeometryCount == 0)
{
if (sParcelIDList.Trim().Length > 0 && sCtrPntIDList1.Trim().Length > 0)
{
pQuFilter.WhereClause = "(PARCELID NOT IN (" + sParcelIDList +
")) AND (CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + "))";
pFeatCursor = pLines.Search(pQuFilter, false);
}
else if (sParcelIDList.Trim().Length == 0 && sCtrPntIDList1.Trim().Length > 0)
{
pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + ")";
pFeatCursor = pLines.Search(pQuFilter, false);
}
}
else
{//do a spatial query
if (sParcelIDList.Trim().Length > 0)
{
pSpatFilt.WhereClause = "PARCELID NOT IN (" + sParcelIDList + ")";
}
else
{
pSpatFilt.WhereClause = "";
}
pFeatCursor = pLines.Search(pSpatFilt, false);
}
m_sDebug = "Collecting lines to be deleted.";
//start collecting the lines that need to be deleted
iCount = 0;
int iCtrPointCount = 0;
string sCtrPointIDList = "";
string sLineParcelIDReference = "";
//Feature cursor is lines that are NOT IN the ParcelIDList
if (pFeatCursor != null)
{
pLineFIDs = new FIDSetClass();
IFeature pFeat4 = pFeatCursor.NextFeature();
while (pFeat4 != null)
{
iCount++;
pLineFIDs.Add(pFeat4.OID);
int iParcRef = Convert.ToInt32(pFeat4.get_Value(iParcelIDX));
if (sLineParcelIDReference.Trim() == "")
{
sLineParcelIDReference = iParcRef.ToString();
}
else
{
if (!pLineToParcelIDRef.Contains(iParcRef))
{
sLineParcelIDReference += "," + iParcRef.ToString();
}
}
pLineToParcelIDRef.Add(iParcRef);
pInvArea.Add((IObject)pFeat4);
//now for this line, get it's points
//first add the center point reference if there is one
object Attr_val = pFeat4.get_Value(iCtrPtFldIDX);
if (Attr_val != DBNull.Value)
{
iCtrPointCount++;
int iCtrPointID = Convert.ToInt32(Attr_val);
pDeletedLinesPoints.Add(iCtrPointID); //add this line's center point
pUsedPoints.Remove(iCtrPointID);
if (sCtrPointIDList.Trim() == "")
{
sCtrPointIDList = iCtrPointID.ToString();
}
else
{
if (CtrPointIDList.Contains(iCtrPointID))
{
iCtrPointCount--;
}
else
{
sCtrPointIDList += "," + iCtrPointID.ToString();
}
}
CtrPointIDList.Add(iCtrPointID);//to keep track of repeats
}
//and also add the FROM and TO point references if they exist
int iVal = (int)pFeat4.get_Value(iFromPtFldIDX);
pDeletedLinesPoints.Add(iVal);//add FROM point
if (pGeomColl.GeometryCount > 0)
{
pUsedPoints.Remove(iVal);
}
iVal = (int)pFeat4.get_Value(iToPtFldIDX);
pDeletedLinesPoints.Add(iVal);//add TO point
if (pGeomColl.GeometryCount > 0)
{
pUsedPoints.Remove(iVal);
}
Marshal.ReleaseComObject(pFeat4);
if (iCtrPointCount > 999)
{
break;
}
pFeat4 = pFeatCursor.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursor);
}
if (iCtrPointCount > 999)
{
throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine +
"Please try again, by selecting fewer fabric lines and points. (More than 1000 center points returned.)");
}
m_sDebug = "Adding orphan radial lines to list.";
if (sCtrPointIDList.Trim().Length > 0)
{
//add the Radial lines at each end of the curves using the collected CtrPtIDs
//CtrPt is always TO point, so find lines CATEGORY = 4 AND TOPOINT IN ()
pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPointIDList + ")";
pFeatCursor = pLines.Search(pQuFilter, false);
IFeature pFeat5 = pFeatCursor.NextFeature();
while (pFeat5 != null)
{
pLineFIDs.Add(pFeat5.OID);
int iParcRef = Convert.ToInt32(pFeat5.get_Value(iParcelIDX));
pLineToParcelIDRef.Add(iParcRef);
if (sLineParcelIDReference.Trim() == "")
{
sLineParcelIDReference = iParcRef.ToString();
}
else
{
if (!pLineToParcelIDRef.Contains(iParcRef))
{
sLineParcelIDReference += "," + iParcRef.ToString();
}
}
Marshal.ReleaseComObject(pFeat5);
pFeat5 = pFeatCursor.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursor);
}
else
{
pQuFilter.WhereClause = "";
}
//refine the DeletedLinesPoints list
foreach (int i in pUsedPoints)
{
if (pDeletedLinesPoints.Contains(i))
{
do
{
} while (pDeletedLinesPoints.Remove(i));
}
}
//add the points to a new FIDSet
pPointFIDs = new FIDSetClass();
foreach (int i in pDeletedLinesPoints)
{
pPointFIDs.Add(i);
}
#endregion
#region OrphanPoints
//We already know which points to delete based on taking down the orphan lines.
//We need to still add to the points FIDSet those points that are "pure" ophan points
//as defined for the pOrphanPointsList variable.
//and add the orphan points to the points FIDSet
foreach (int i in pOrphanPointsList)
{
bool bFound = false;
pPointFIDs.Find(i, out bFound);
if (!bFound)
{
pPointFIDs.Add(i);
}
}
#endregion
#region orphan Line points
//next check for orphan line-points
//the line-point is deleted if there is no underlying point
//or if the from and to point references do not exist.
pSpatFilt.WhereClause = "";
pSpatFilt.Geometry = ToolSelectGeometry;
IFeatureCursor pFeatCursLinePoints = pLinePoints.Search(pSpatFilt, false);
IFeature pLPFeat = pFeatCursLinePoints.NextFeature();
int iLinePtPointIdIdx = pLinePoints.FindField("LINEPOINTID");
int iLinePtFromPtIdIdx = pLinePoints.FindField("FROMPOINTID");
int iLinePtToPtIdIdx = pLinePoints.FindField("TOPOINTID");
pLinePointFIDs = new FIDSetClass();
while (pLPFeat != null)
{
bool bExistsA = true;
bool bExists1 = true;
bool bExists2 = true;
bool bExists3 = true;
int iVal = (int)pLPFeat.get_Value(iLinePtPointIdIdx);
pPointFIDs.Find(iVal, out bExists1);
if (!pPointsInsideBoxList.Contains(iVal))
{
bExistsA = false;
}
iVal = (int)pLPFeat.get_Value(iLinePtFromPtIdIdx);
string sFrom = iVal.ToString();
pPointFIDs.Find(iVal, out bExists2);
iVal = (int)pLPFeat.get_Value(iLinePtToPtIdIdx);
string sTo = iVal.ToString();
pPointFIDs.Find(iVal, out bExists3);
int iOID = pLPFeat.OID;
if (bExists1 || bExists2 || bExists3)
{
pLinePointFIDs.Add(iOID);
}
if (!sFromToPair.Contains(sFrom + ":" + sTo) && !sFromToPair.Contains(sTo + ":" + sFrom))
{
pLinePointFIDs.Find(iOID, out bExists1);
if (!bExists1)
{
pLinePointFIDs.Add(iOID);
}
}
//if (!bExistsA || !bExistsB || !bExistsC)
if (!bExistsA)
{
bool bFound = true;
pLinePointFIDs.Find(iOID, out bFound);
if (!bFound)
{
pLinePointFIDs.Add(iOID);
}
}
pPointsInsideBoxList.Contains(iVal);
Marshal.ReleaseComObject(pLPFeat);
pLPFeat = pFeatCursLinePoints.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursLinePoints);
#endregion
#region Refine the lines that are on the delete list
//next step is to refine and double-check to make sure that the lines that are on the delete list
//do not have a parcel record somewhere else (not spatially connected to the line) (example unjoined, or bad geom)
string sFreshlyFoundParcels = "";
if (sLineParcelIDReference.Trim() != "")
{
pQuFilter.WhereClause = sPref + pParcels.OIDFieldName + sSuff + " IN (" + sLineParcelIDReference + ")";
pFeatCursor = pParcels.Search(pQuFilter, false);
IFeature pFeat6 = pFeatCursor.NextFeature();
while (pFeat6 != null)
{
int iOID = pFeat6.OID;
if (sFreshlyFoundParcels.Trim() == "")
{
sFreshlyFoundParcels = iOID.ToString();
}
else
{
sFreshlyFoundParcels += "," + iOID.ToString();
}
Marshal.ReleaseComObject(pFeat6);
pFeat6 = pFeatCursor.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursor);
if (sFreshlyFoundParcels.Trim() != "")
{
pQuFilter.WhereClause = "PARCELID IN (" + sFreshlyFoundParcels + ")";
pFeatCursor = pLines.Search(pQuFilter, false);
IFeature pFeat9 = pFeatCursor.NextFeature();
while (pFeat9 != null)
{
int iOID = pFeat9.OID;
bool bIsHere = false;
pLineFIDs.Delete(iOID);
int iVal = Convert.ToInt32(pFeat9.get_Value(iFromPtFldIDX));
pPointFIDs.Find(iVal, out bIsHere);
if (bIsHere)
{
pPointFIDs.Delete(iVal);
}
iVal = Convert.ToInt32(pFeat9.get_Value(iToPtFldIDX));
pPointFIDs.Find(iVal, out bIsHere);
if (bIsHere)
{
pPointFIDs.Delete(iVal);
}
Marshal.ReleaseComObject(pFeat9);
pFeat9 = pFeatCursor.NextFeature();
}
Marshal.FinalReleaseComObject(pFeatCursor);
}
}
#endregion
#region Make sure the points on the delete list are not part of a construction
//For post 10.0, Make sure the points on the delete list are not part of a construction if they are then null geometry
//pQuFilter.WhereClause=pLines.LengthField.Name + " = 0 AND CATEGORY <> 4";
//IFeatureCursor pFeatCursLines101 = pLines.Search(pQuFilter, false);
//this would open a new cursor and do a query on the entire
#endregion
#region report results and do edits
dlgReport Report = new dlgReport();
//Display the dialog
System.Drawing.Color BackColorNow = Report.textBox1.BackColor;
if (iCount == 0 && pPointFIDs.Count() == 0 && pLinePointFIDs.Count() == 0)
{
Report.textBox1.BackColor = System.Drawing.Color.LightGreen;
Report.textBox1.Text = "Selected area has no orphan lines or points.";
}
else
{
int iCount1 = 0;
int iCount2 = 0;
int iCount3 = 0;
if (pLineFIDs != null)
{
iCount1 = pLineFIDs.Count();
}
if (pPointFIDs != null)
{
iCount2 = pPointFIDs.Count();
}
if (pLinePointFIDs != null)
{
iCount3 = pLinePointFIDs.Count();
}
iCount = iCount1 + iCount2 + iCount3;
if (iCount > 0)
{
pEd.StartOperation();
FabricUTILS.DeleteRowsByFIDSet((ITable)pLines, pLineFIDs, null, null);
FabricUTILS.DeleteRowsByFIDSet((ITable)pPoints, pPointFIDs, null, null);
if (pPointFIDs.Count() > 0)
{
//now need to update the control points associated with any deleted points.
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
ITable pControlTable = pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
int idxNameFldOnControl = pControlTable.FindField("POINTID");
string ControlNameFldName = pControlTable.Fields.get_Field(idxNameFldOnControl).Name;
int i;
List <int> pPointFIDList = new List <int>();
pPointFIDs.Reset();
pPointFIDs.Next(out i);
while (i > -1)
{
pPointFIDList.Add(i);
pPointFIDs.Next(out i);
}
List <string> InClausePointsNotConnectedToLines = FabricUTILS.InClauseFromOIDsList(pPointFIDList, 995);
pQuFilter.WhereClause = ControlNameFldName + " IN (" + InClausePointsNotConnectedToLines[0] + ")";
pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch
if (!FabricUTILS.ResetControlAssociations(pControlTable, pQuFilter, false))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
pEd.AbortOperation();
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
}
pQuFilter.WhereClause = "";
FabricUTILS.DeleteRowsByFIDSet((ITable)pLinePoints, pLinePointFIDs, null, null);
pEd.StopOperation("Delete " + iCount.ToString() + " orphans");
Report.textBox1.Text = "Deleted:";
if (iCount1 > 0)
{
Report.textBox1.Text += Environment.NewLine + iCount1.ToString() + " orphaned lines";
}
if (iCount2 > 0)
{
Report.textBox1.Text += Environment.NewLine + iCount2.ToString() + " orphaned points";
}
if (iCount3 > 0)
{
Report.textBox1.Text += Environment.NewLine + iCount3.ToString() + " orphaned line points";
}
}
if (sFreshlyFoundParcels.Trim() != "")
{
if (Report.textBox1.Text.Trim() != "")
{
Report.textBox1.Text += Environment.NewLine;
}
Report.textBox1.Text += "Info: Line(s) that you selected are not directly" +
Environment.NewLine + "touching a parent parcel geometry. Check parcels with OIDs:" +
sFreshlyFoundParcels;
}
}
IArea pArea = (IArea)ToolSelectGeometry;
if (pArea.Area > 0)
{
SetDialogLocationAtPoint(Report, pArea.Centroid);
}
DialogResult pDialogResult = Report.ShowDialog();
Report.textBox1.BackColor = BackColorNow;
pInvArea.Display = ArcMap.Document.ActiveView.ScreenDisplay;
pInvArea.Invalidate((short)esriScreenCache.esriAllScreenCaches);
if (pPointLayer != null)
{
ArcMap.Document.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography,
pPointLayer, ArcMap.Document.ActiveView.Extent);
}
#endregion
}
catch (Exception ex)
{
if (pEd != null)
{
pEd.AbortOperation();
}
MessageBox.Show(ex.Message + Environment.NewLine + m_sDebug, "Delete Orphans Tool");
this.OnDeactivate();
}
#region Final Cleanup
finally
{
pDeletedLinesPoints.Clear();
pDeletedLinesPoints = null;
pUsedPoints.Clear();
pUsedPoints = null;
CtrPointIDList.Clear();
CtrPointIDList = null;
pParcelsList.Clear();
pParcelsList = null;
pOrphanPointsList.Clear();
pOrphanPointsList = null;
pPointsInsideBoxList.Clear();
pPointsInsideBoxList = null;
pLineToParcelIDRef.Clear();
pLineToParcelIDRef = null;
sFromToPair.Clear();
sFromToPair = null;
FabricUTILS = null;
}
#endregion
}
