// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode((int)pi.dwProcessId)));
if (this.m_ad7ProgramId == Guid.Empty)
{
Debug.Fail("Attaching failed");
return(VSConstants.E_FAIL);
}
this._programCreateContinued.WaitOne();
this.writeCommandQueue.Enqueue(new Command(CommandKind.DebuggerEnvironmentReady));
NativeMethods.ResumeThread(threadHandle);
return(0);
}
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 pProcess)
{
Debug.WriteLine("AD7Engine ResumeProcess");
if (pProcess is AD7Process)
{
IDebugPort2 port;
pProcess.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
AD7ProgramNode node = (pProcess as AD7Process).Node;
int result = notify.AddProgramNode(node);
if (node.Debugger == null)
{
return(VSConstants.E_ABORT);
}
return(VSConstants.S_OK);
}
return(VSConstants.E_UNEXPECTED);
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
//Debug.Assert(Worker.MainThreadId == Worker.CurrentThreadId);
/*Debug.Assert(m_pollThread != null);
* Debug.Assert(m_engineCallback != null);
* Debug.Assert(m_debuggedProcess != null);
* Debug.Assert(m_ad7ProgramId == Guid.Empty);*/
try
{
int processId = EngineUtils.GetProcessId(process);
if (processId != debuggedProcess.Id)
{
return(EngineConstants.S_FALSE);
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(debuggedProcess.Id)));
if (m_ad7ProgramId == Guid.Empty)
{
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return(EngineConstants.E_FAIL);
}
debuggedProcess.ResumeFromLaunch();
// Resume the threads in the debuggee process
/*m_pollThread.RunOperation(new Operation(delegate
* {
* m_debuggedProcess.ResumeFromLaunch();
* }));*/
return(EngineConstants.S_OK);
}
catch (ComponentException e)
{
return(e.HRESULT);
}
catch (Exception e)
{
return(EngineUtils.UnexpectedException(e));
}
}
public int ResumeProcess(IDebugProcess2 process)
{
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(_program));
Debug.WriteLine("IDebugEngineLaunch2.ResumeProcess: returning S_OK");
return(VSConstants.S_OK);
}
/// <summary>
/// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
/// </summary>
/// <param name="process"></param>
/// <returns>If successful, returns S_OK; otherwise, returns an error code.</returns>
public int ResumeProcess(IDebugProcess2 process)
{
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(Program.Node));
return(S_OK);
}
public int ResumeProcess(IDebugProcess2 process)
{
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new MonoProgramNode(processId)));
return(VSConstants.S_OK);
}
public int ResumeProcess(IDebugProcess2 pProcess)
{
IDebugPort2 port;
Guid id;
pProcess.GetPort(out port);
pProcess.GetProcessId(out id);
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
return(notify.AddProgramNode(new MonoProgramNode(id)));
}
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 aProcess)
{
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
try
{
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
var xProcess = aProcess as AD7Process;
if (xProcess == null)
{
return(VSConstants.E_INVALIDARG);
}
IDebugPort2 xPort;
EngineUtils.RequireOk(aProcess.GetPort(out xPort));
var xDefPort = (IDebugDefaultPort2)xPort;
IDebugPortNotify2 xNotify;
EngineUtils.RequireOk(xDefPort.GetPortNotify(out xNotify));
// This triggers Attach
EngineUtils.RequireOk(xNotify.AddProgramNode(mProgNode));
Callback.OnModuleLoad(mModule);
Callback.OnSymbolSearch(mModule, xProcess.mISO.Replace("iso", "pdb"), enum_MODULE_INFO_FLAGS.MIF_SYMBOLS_LOADED);
// Important!
//
// This call triggers setting of breakpoints that exist before run.
// So it must be called before we resume the process.
// If not called VS will call it after our 3 startup events, but thats too late.
// This line was commented out in earlier Cosmos builds and caused problems with
// breakpoints and timing.
Callback.OnThreadStart(mThread);
// Not sure what this does exactly. It was commented out before
// but so was a lot of stuff we actually needed. If its uncommented it
// throws:
// "Operation is not valid due to the current state of the object."
//AD7EntrypointEvent.Send(this);
// Now finally release our process to go after breakpoints are set
mProcess.ResumeFromLaunch();
}
catch (Exception e)
{
return(EngineUtils.UnexpectedException(e));
}
return(VSConstants.S_OK);
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
Debug.Assert(_pollThread != null);
Debug.Assert(_engineCallback != null);
Debug.Assert(_debuggedProcess != null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
try
{
AD_PROCESS_ID processId = EngineUtils.GetProcessId(process);
if (!EngineUtils.ProcIdEquals(processId, _debuggedProcess.Id))
{
return(Constants.S_FALSE);
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(_debuggedProcess.Id, _engineGuid)));
if (_ad7ProgramId == Guid.Empty)
{
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return(Constants.E_FAIL);
}
// NOTE: We wait for the program create event to be continued before we really resume the process
return(Constants.S_OK);
}
catch (MIException e)
{
return(e.HResult);
}
catch (Exception e) when(ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
return(EngineUtils.UnexpectedException(e));
}
}
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 pProcess)
{
IDebugPort2 port;
pProcess.GetPort(out port);
Guid id;
pProcess.GetProcessId(out id);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
int result = notify.AddProgramNode(new AD7ProgramNode(id));
return(Constants.S_OK);
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
if (_events == null)
{
// process failed to start
return(VSConstants.E_FAIL);
}
Debug.Assert(_events != null);
Debug.Assert(_process != null);
Debug.Assert(_process != null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
int processId = EngineUtils.GetProcessId(process);
if (processId != _process.Id)
{
Debug.WriteLine("ResumeProcess fails, wrong process");
return(VSConstants.S_FALSE);
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(_process.Id)));
if (_ad7ProgramId == Guid.Empty)
{
Debug.WriteLine("ResumeProcess fails, empty program guid");
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return(VSConstants.E_FAIL);
}
Debug.WriteLine("ResumeProcess return S_OK");
return(VSConstants.S_OK);
}
public int ResumeProcess(IDebugProcess2 pProcess)
{
DebugHelper.TraceEnteringMethod();
IDebugPort2 port;
pProcess.GetPort(out port);
Guid id;
pProcess.GetProcessId(out id);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
int result = notify.AddProgramNode(Node = new MonoProgramNode(DebuggedProcess, id));
return(VSConstants.S_OK);
}
int IDebugEngineLaunch2.TerminateProcess(IDebugProcess2 pProcess)
{
_node.Debugger.DoEndProgram();
Debug.WriteLine("AD7Engine TerminateProcess");
IDebugPort2 port;
pProcess.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.RemoveProgramNode(_node);
return(VSConstants.S_OK);
}
// This function is used to terminate a process that the SampleEngine launched
// The debugger will call IDebugEngineLaunch2::CanTerminateProcess before calling this method.
int IDebugEngineLaunch2.TerminateProcess(IDebugProcess2 process)
{
Log.Debug("Engine: TerminateProcess");
IDebugPort2 port;
process.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.RemoveProgramNode(_node);
Debugger.Stop();
return(VSConstants.S_OK);
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
if (process is ScriptDebugProcess)
{
IDebugPort2 port;
process.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.AddProgramNode((process as ScriptDebugProcess).Node);
return(VSConstants.S_OK);
}
return(VSConstants.E_UNEXPECTED);
}
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
var program = process as Program;
if (program == null)
{
return(VSConstants.E_FAIL);
}
IDebugPort2 port;
if (process.GetPort(out port) != VSConstants.S_OK)
{
return(VSConstants.E_FAIL);
}
string portName;
port.GetPortName(out portName);
Guid guidPort;
port.GetPortId(out guidPort);
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
if (defaultPort.GetPortNotify(out portNotify) != VSConstants.S_OK)
{
return(VSConstants.E_FAIL);
}
if (portNotify.AddProgramNode(program) != VSConstants.S_OK)
{
return(VSConstants.E_FAIL);
}
return(VSConstants.S_OK);
}
/// <summary>
/// Resumes process execution.
/// </summary>
/// <param name="pProcess">An IDebugProcess2 object that represents the process to be resumed.</param>
/// <returns>
/// If successful, returns S_OK; otherwise returns an error code.
/// </returns>
public override int ResumeProcess(IDebugProcess2 pProcess)
{
Logger.Debug(string.Empty);
var process = pProcess as PowerShellProcess;
if (process == null)
{
return(VSConstants.E_UNEXPECTED);
}
IDebugPort2 port;
pProcess.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
defaultPort.GetPortNotify(out portNotify);
portNotify.AddProgramNode(Program);
return(VSConstants.S_OK);
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
Debug.Assert(m_engineCallback != null);
try
{
var xProcess = process as AD7Process;
if (xProcess == null)
{
return VSConstants.E_INVALIDARG;
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port = null;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify = null;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
//EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(m_debuggedProcess.Id))); //Copy AD7ProgramNode from Cosmos
EngineUtils.RequireOk(portNotify.AddProgramNode(m_progNode)); //Copy AD7ProgramNode from Cosmos
Callback.OnModuleLoad(m_module);
//Callback.OnSymbolSearch(m_module, xProcess.mISO.Replace("iso", "pdb"), enum_MODULE_INFO_FLAGS.MIF_SYMBOLS_LOADED); // from Cosmos
// Important!
//
// This call triggers setting of breakpoints that exist before run.
// So it must be called before we resume the process.
// If not called VS will call it after our 3 startup events, but thats too late.
// This line was commented out in earlier Cosmos builds and caused problems with
// breakpoints and timing.
Callback.OnThreadStart(currentThread());
m_process.ResumeFromLaunch();
}
catch (Exception e)
{
return EngineUtils.UnexpectedException(e);
}
return VSConstants.S_OK;
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
Debug.Assert(_pollThread != null);
Debug.Assert(_engineCallback != null);
Debug.Assert(_debuggedProcess != null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
try
{
AD_PROCESS_ID processId = EngineUtils.GetProcessId(process);
if (!EngineUtils.ProcIdEquals(processId, _debuggedProcess.Id))
{
return Constants.S_FALSE;
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(_debuggedProcess.Id)));
if (_ad7ProgramId == Guid.Empty)
{
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return Constants.E_FAIL;
}
// NOTE: We wait for the program create event to be continued before we really resume the process
return Constants.S_OK;
}
catch (MIException e)
{
return e.HResult;
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
return EngineUtils.UnexpectedException(e);
}
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
if (_mixedMode) {
return VSConstants.E_NOTIMPL;
}
Debug.WriteLine("Python Debugger ResumeProcess Begin");
AssertMainThread();
if (_events == null) {
// process failed to start
Debug.WriteLine("ResumeProcess fails, no events");
return VSConstants.E_FAIL;
}
Debug.Assert(_process != null);
Debug.Assert(_process != null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
int processId = EngineUtils.GetProcessId(process);
if (processId != _process.Id) {
Debug.WriteLine("ResumeProcess fails, wrong process");
return VSConstants.S_FALSE;
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(_process.Id)));
if (_ad7ProgramId == Guid.Empty) {
Debug.WriteLine("ResumeProcess fails, empty program guid");
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return VSConstants.E_FAIL;
}
Debug.WriteLine("ResumeProcess return S_OK");
return VSConstants.S_OK;
}
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 pProcess)
{
Debug.WriteLine("AD7Engine ResumeProcess");
if (pProcess is AD7Process)
{
IDebugPort2 port;
pProcess.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
AD7ProgramNode node = (pProcess as AD7Process).Node;
int result = notify.AddProgramNode(node);
if (node.Debugger == null)
return VSConstants.E_FAIL;
return VSConstants.S_OK;
}
return VSConstants.E_UNEXPECTED;
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode((int)pi.dwProcessId)));
if (this.m_ad7ProgramId == Guid.Empty)
{
Debug.Fail("Attaching failed");
return VSConstants.E_FAIL;
}
this._programCreateContinued.WaitOne();
this.writeCommandQueue.Enqueue(new Command(CommandKind.DebuggerEnvironmentReady));
NativeMethods.ResumeThread(threadHandle);
return 0;
}
public int ResumeProcess(IDebugProcess2 pProcess)
{
DebugHelper.TraceEnteringMethod();
IDebugPort2 port;
pProcess.GetPort(out port);
Guid id;
pProcess.GetProcessId(out id);
var defaultPort = (IDebugDefaultPort2) port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
int result = notify.AddProgramNode(new AD7ProgramNode(DebuggedProcess, id));
return VSConstants.S_OK;
}
int IDebugEngineLaunch2.TerminateProcess(IDebugProcess2 pProcess)
{
_node.Debugger.DoEndProgram();
Debug.WriteLine("AD7Engine TerminateProcess");
IDebugPort2 port;
pProcess.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.RemoveProgramNode(_node);
return VSConstants.S_OK;
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
Debug.WriteLine("Python Debugger ResumeProcess Begin");
AssertMainThread();
if (_events == null)
{
// process failed to start
Debug.WriteLine("ResumeProcess fails, no events");
return(VSConstants.E_FAIL);
}
Debug.Assert(_events != null);
Debug.Assert(_process != null);
Debug.Assert(_process != null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
int processId = EngineUtils.GetProcessId(process);
if (processId != _process.Id)
{
Debug.WriteLine("ResumeProcess fails, wrong process");
return(VSConstants.S_FALSE);
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(_process.Id)));
if (_ad7ProgramId == Guid.Empty)
{
Debug.WriteLine("ResumeProcess fails, empty program guid");
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return(VSConstants.E_FAIL);
}
// wait for the load event to complete, and pump messages
while (!_process.HasExited && !_loadComplete.WaitOne(100))
{
Debug.WriteLine("ResumeProcess waiting for load complete");
}
// Resume the threads in the debuggee process
if (_process.HasExited)
{
Debug.WriteLine("ResumeProcess resume all");
_process.Resume();
}
else
{
// return failure?
Debug.WriteLine("Process exited");
}
Debug.WriteLine("ResumeProcess return S_OK");
return(VSConstants.S_OK);
}
// This function is used to terminate a process that the SampleEngine launched
// The debugger will call IDebugEngineLaunch2::CanTerminateProcess before calling this method.
int IDebugEngineLaunch2.TerminateProcess(IDebugProcess2 process)
{
Log.Debug("Engine: TerminateProcess");
_events.ProgramDestroyed(_node);
IDebugPort2 port;
process.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.RemoveProgramNode(_node);
Debugger.Stop();
return VSConstants.S_OK;
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
if (process is ScriptDebugProcess)
{
IDebugPort2 port;
process.GetPort(out port);
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 notify;
defaultPort.GetPortNotify(out notify);
notify.AddProgramNode((process as ScriptDebugProcess).Node);
return VSConstants.S_OK;
}
return VSConstants.E_UNEXPECTED;
}
/// <summary>
/// Resumes process execution.
/// </summary>
/// <param name="pProcess">An IDebugProcess2 object that represents the process to be resumed.</param>
/// <returns>
/// If successful, returns S_OK; otherwise returns an error code.
/// </returns>
public override int ResumeProcess( IDebugProcess2 pProcess )
{
Logger.Debug( string.Empty );
var process = pProcess as PowerShellProcess;
if ( process == null )
{
return VSConstants.E_UNEXPECTED;
}
IDebugPort2 port;
pProcess.GetPort( out port );
var defaultPort = (IDebugDefaultPort2) port;
IDebugPortNotify2 portNotify;
defaultPort.GetPortNotify( out portNotify );
portNotify.AddProgramNode( Program );
return VSConstants.S_OK;
}
/// <summary>
/// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended. (http://msdn.microsoft.com/en-us/library/bb146261.aspx)
/// </summary>
/// <param name="process"> An IDebugProcess2 object that represents the process to be resumed. </param>
/// <returns> An IDebugProcess2 object that represents the process to be resumed. </returns>
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
Debug.Assert(m_engineCallback != null);
try
{
var xProcess = process as AD7Process;
if (xProcess == null)
{
return VSConstants.E_INVALIDARG;
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port = null;
EngineUtils.RequireOk(process.GetPort(out port));
IDebugDefaultPort2 defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify = null;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(m_progNode));
Callback.OnModuleLoad(m_module);
Callback.OnThreadStart(currentThread());
}
catch (Exception e)
{
return EngineUtils.UnexpectedException(e);
}
return VSConstants.S_OK;
}
// Resume a process launched by IDebugEngineLaunch2.LaunchSuspended
int IDebugEngineLaunch2.ResumeProcess(IDebugProcess2 process)
{
//Debug.Assert(Worker.MainThreadId == Worker.CurrentThreadId);
Debug.Assert(m_pollThread != null);
Debug.Assert(m_engineCallback != null);
Debug.Assert(m_debuggedProcess != null);
Debug.Assert(m_ad7ProgramId == Guid.Empty);
try {
var processId = EngineUtils.GetProcessId(process);
if (processId != m_debuggedProcess.Id) {
return Constants.S_FALSE;
}
// Send a program node to the SDM. This will cause the SDM to turn around and call IDebugEngine2.Attach
// which will complete the hookup with AD7
IDebugPort2 port;
EngineUtils.RequireOk(process.GetPort(out port));
var defaultPort = (IDebugDefaultPort2)port;
IDebugPortNotify2 portNotify;
EngineUtils.RequireOk(defaultPort.GetPortNotify(out portNotify));
EngineUtils.RequireOk(portNotify.AddProgramNode(new AD7ProgramNode(m_debuggedProcess.Id)));
if (m_ad7ProgramId == Guid.Empty) {
Debug.Fail("Unexpected problem -- IDebugEngine2.Attach wasn't called");
return Constants.E_FAIL;
}
// Resume the threads in the debuggee process
m_pollThread.RunOperation(() => m_debuggedProcess.ResumeFromLaunch());
return Constants.S_OK;
} catch (Exception e) {
return EngineUtils.UnexpectedException(e);
}
}