/// <summary>
/// Generate privacy key from authentication password and engine id
/// </summary>
/// <returns>Privacy key on success or null on failure</returns>
public byte[] GeneratePrivacyKey()
{
if (USM.Authentication == AuthenticationDigests.None)
{
return(null);
}
if (USM.Privacy == PrivacyProtocols.None)
{
return(null);
}
if (USM.PrivacySecret == null || USM.PrivacySecret.Length <= 0)
{
return(null);
}
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(USM.Authentication);
if (authProto != null)
{
IPrivacyProtocol privProto = SnmpSharpNet.PrivacyProtocol.GetInstance(USM.Privacy);
if (privProto != null)
{
return(privProto.PasswordToKey(USM.PrivacySecret, USM.EngineId, authProto));
}
}
return(null);
}
/// <summary>Generate privacy key from authentication password and engine id</summary>
/// <returns>Privacy key on success or null on failure</returns>
public byte[] GeneratePrivacyKey()
{
if (userSecurityModel.Authentication == AuthenticationDigests.None)
{
return(null);
}
if (userSecurityModel.Privacy == EPrivacyProtocols.None)
{
return(null);
}
if (userSecurityModel.PrivacySecret == null || userSecurityModel.PrivacySecret.Length <= 0)
{
return(null);
}
IAuthenticationDigest authProto = Authentication.GetInstance(userSecurityModel.Authentication);
if (authProto != null)
{
IPrivacyProtocol privProto = PrivacyProtocol.GetInstance(userSecurityModel.Privacy);
if (privProto != null)
{
return(privProto.PasswordToKey(userSecurityModel.PrivacySecret, userSecurityModel.EngineId, authProto));
}
}
return(null);
}
/// <summary>
/// Decode SNMP version 3 packet. This method will perform authentication check and decode privacy protected <see cref="ScopedPdu"/>. This method will
/// not check for the timeliness of the packet, correct engine boot value or engine id because it does not have a reference to the engine time prior to this call.
/// </summary>
/// <param name="berBuffer">BER encoded SNMP version 3 packet buffer</param>
/// <param name="length">Buffer length</param>
public override int Decode(byte[] berBuffer, int length)
{
byte[] pkey = null;
byte[] akey = null;
if (MsgFlags.Authentication && USM.EngineId.Length > 0)
{
IAuthenticationDigest auth = Authentication.GetInstance(USM.Authentication);
if (auth == null)
{
throw new SnmpException(SnmpException.UnsupportedNoAuthPriv, "Invalid authentication protocol.");
}
akey = auth.PasswordToKey(USM.AuthenticationSecret, USM.EngineId);
if (MsgFlags.Privacy && USM.EngineId.Length > 0)
{
IPrivacyProtocol privacyProtocol = PrivacyProtocol.GetInstance(USM.Privacy);
if (privacyProtocol == null)
{
throw new SnmpException(SnmpException.UnsupportedPrivacyProtocol, "Specified privacy protocol is not supported.");
}
pkey = privacyProtocol.PasswordToKey(USM.PrivacySecret, USM.EngineId, auth);
}
}
return(Decode(berBuffer, length, akey, pkey));
}
/// <summary>
/// Authenticate SNMP version 3 message.
///
/// Before calling this member, entire SNMP version 3 packet needs to be encoded. After authentication
/// process is completed, authenticationParameters value in the USM header is updated and SNMPv3 packet
/// needs to be re-encoded to include it in the BER encoded stream prior to transmission.
/// </summary>
/// <param name="authKey">Authentication key (not password)</param>
/// <param name="wholePacket">SNMP version 3 BER encoded packet.</param>
public void Authenticate(byte[] authKey, ref MutableByte wholePacket)
{
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(_authentication);
byte[] authParam = authProto.authenticate(authKey, wholePacket);
_authenticationParameters = new OctetString(authParam);
}
/// <summary>
/// Build cached authentication and privacy encryption keys if they are appropriate for the selected security mode.
/// </summary>
/// <remarks>
/// This method should be called after discovery process has been completed and all security related values
/// have been set. For noAuthNoPriv, none of the keys are generated. authNoPriv will result in authentication
/// key cached. authPriv will generate authentication and privacy keys.
///
/// For successful key caching you need to set both relevant protocols and secret values.
/// </remarks>
public void BuildCachedSecurityKeys()
{
_authenticationKey = _privacyKey = null;
if (_engineId == null || _engineId.Length <= 0)
{
return;
}
if (_authenticationSecret == null || _authenticationSecret.Length <= 0)
{
return;
}
if (_authenticationProtocol != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(_authenticationProtocol);
if (authProto != null)
{
_authenticationKey = authProto.PasswordToKey(_authenticationSecret, _engineId);
if (_privacyProtocol != PrivacyProtocols.None && _privacySecret != null && _privacySecret.Length > 0)
{
IPrivacyProtocol privProto = SnmpSharpNet.PrivacyProtocol.GetInstance(_privacyProtocol);
if (privProto != null)
{
_privacyKey = privProto.PasswordToKey(_privacySecret, _engineId, authProto);
}
}
}
}
}
/// <summary>
/// Some protocols support a method to extend the encryption or decryption key when supplied key
/// is too short.
/// </summary>
/// <param name="shortKey">Key that needs to be extended</param>
/// <param name="password">Privacy password as configured on the SNMP agent.</param>
/// <param name="engineID">Authoritative engine id. Value is retrieved as part of SNMP v3 discovery procedure</param>
/// <param name="authProtocol">Authentication protocol class instance cast as <see cref="IAuthenticationDigest" /></param>
/// <returns>Extended key value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID,
IAuthenticationDigest authProtocol)
{
var extKey = new byte[MinimumKeyLength];
var lastKeyBuf = new byte[shortKey.Length];
Array.Copy(shortKey, lastKeyBuf, shortKey.Length);
var keyLen = shortKey.Length > MinimumKeyLength ? MinimumKeyLength : shortKey.Length;
Array.Copy(shortKey, extKey, keyLen);
while (keyLen < MinimumKeyLength)
{
var tmpBuf = authProtocol.PasswordToKey(lastKeyBuf, engineID);
if (tmpBuf == null)
{
return(null);
}
if (tmpBuf.Length <= MinimumKeyLength - keyLen)
{
Array.Copy(tmpBuf, 0, extKey, keyLen, tmpBuf.Length);
keyLen += tmpBuf.Length;
}
else
{
Array.Copy(tmpBuf, 0, extKey, keyLen, MinimumKeyLength - keyLen);
keyLen += MinimumKeyLength - keyLen;
}
lastKeyBuf = new byte[tmpBuf.Length];
Array.Copy(tmpBuf, lastKeyBuf, tmpBuf.Length);
}
return(extKey);
}
/// <summary>Build cached authentication and privacy encryption keys if they are appropriate for the selected security mode.</summary>
/// <remarks>
/// This method should be called after discovery process has been completed and all security related values
/// have been set. For noAuthNoPriv, none of the keys are generated. authNoPriv will result in authentication
/// key cached. authPriv will generate authentication and privacy keys.
///
/// For successful key caching you need to set both relevant protocols and secret values.
/// </remarks>
public void BuildCachedSecurityKeys()
{
authenticationKey = privacyKey = null;
if (engineId == null || engineId.Length <= 0)
{
return;
}
if (authenticationSecret == null || authenticationSecret.Length <= 0)
{
return;
}
if (authenticationProtocol != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = Security.Authentication.GetInstance(authenticationProtocol);
if (authProto != null)
{
authenticationKey = authProto.PasswordToKey(authenticationSecret, engineId);
if (privacyProtocol != EPrivacyProtocols.None && privacySecret != null && privacySecret.Length > 0)
{
IPrivacyProtocol privProto = PrivacyProtocol.GetInstance(privacyProtocol);
if (privProto != null)
{
privacyKey = privProto.PasswordToKey(privacySecret, engineId, authProto);
}
}
}
}
}
/// <summary>Encode SNMP version 3 packet</summary>
/// <remarks>
/// Before encoding the packet into a byte array you need to ensure all required information is
/// set. Examples of required information is request type, Vbs (Oid + values pairs), USM settings including
/// SecretName, authentication method and secret (if needed), privacy method and secret (if needed), etc.
/// </remarks>
/// <returns>Byte array BER encoded SNMP packet.</returns>
public override byte[] Encode()
{
byte[] pkey = null;
byte[] akey = null;
if (messageFlags.Authentication && userSecurityModel.EngineId.Length > 0)
{
IAuthenticationDigest auth = Authentication.GetInstance(userSecurityModel.Authentication);
if (auth == null)
{
throw new SnmpException(SnmpException.EErrorCode.UnsupportedNoAuthPriv, "Invalid authentication protocol.");
}
akey = auth.PasswordToKey(userSecurityModel.AuthenticationSecret, userSecurityModel.EngineId);
if (messageFlags.Privacy && userSecurityModel.EngineId.Length > 0)
{
IPrivacyProtocol privacyProtocol = PrivacyProtocol.GetInstance(userSecurityModel.Privacy);
if (privacyProtocol == null)
{
throw new SnmpException(SnmpException.EErrorCode.UnsupportedPrivacyProtocol, "Specified privacy protocol is not supported.");
}
pkey = privacyProtocol.PasswordToKey(userSecurityModel.PrivacySecret, userSecurityModel.EngineId, auth);
}
}
return(Encode(akey, pkey));
}
/// <summary>
/// Authenticate SNMP version 3 message.
///
/// Before calling this member, entire SNMP version 3 packet needs to be encoded. After authentication
/// process is completed, authenticationParameters value in the USM header is updated and SNMPv3 packet
/// needs to be re-encoded to include it in the BER encoded stream prior to transmission.
/// </summary>
/// <param name="wholePacket">SNMP version 3 BER encoded packet.</param>
public void Authenticate(ref MutableByte wholePacket)
{
if (_authentication != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(_authentication);
byte[] authParam = authProto.authenticate(AuthenticationSecret, EngineId.ToArray(), wholePacket);
_authenticationParameters = new OctetString(authParam);
}
}
/// <summary>
/// Encrypt ScopedPdu using DES encryption protocol
/// </summary>
/// <param name="unencryptedData">Unencrypted ScopedPdu byte array</param>
/// <param name="offset">Offset to start encryption</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key. Key has to be at least 32 bytes is length</param>
/// <param name="engineBoots">Authoritative engine boots value</param>
/// <param name="engineTime">Authoritative engine time value. Not used for DES</param>
/// <param name="privacyParameters">
/// Privacy parameters out buffer. This field will be filled in with information
/// required to decrypt the information. Output length of this field is 8 bytes and space has to be reserved
/// in the USM header to store this information
/// </param>
/// <param name="authDigest">Authentication digest class reference. Not used by DES and can be null.</param>
/// <returns>Encrypted byte array</returns>
/// <exception cref="ArgumentOutOfRangeException">
/// Thrown when encryption key is null or length of the encryption key is too
/// short.
/// </exception>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots,
int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
if (key == null || key.Length < MinimumKeyLength)
{
throw new ArgumentOutOfRangeException("encryptionKey",
"Encryption key length has to 32 bytes or more.");
}
privacyParameters = GetSalt(engineBoots);
var iv = GetIV(key, privacyParameters);
// DES uses 8 byte keys but we need 16 to encrypt ScopedPdu. Get first 8 bytes and use them as encryption key
var outKey = GetKey(key);
var div = (int)Math.Floor(length / 8.0);
if (length % 8 != 0)
{
div += 1;
}
var newLength = div * 8;
var result = new byte[newLength];
var buffer = new byte[newLength];
var inbuffer = new byte[8];
var cipherText = iv;
var posIn = 0;
var posResult = 0;
Buffer.BlockCopy(unencryptedData, offset, buffer, 0, length);
DES des = new DESCryptoServiceProvider();
des.Mode = CipherMode.ECB;
des.Padding = PaddingMode.None;
var transform = des.CreateEncryptor(outKey, null);
for (var b = 0; b < div; b++)
{
for (var i = 0; i < 8; i++)
{
inbuffer[i] = (byte)(buffer[posIn] ^ cipherText[i]);
posIn++;
}
transform.TransformBlock(inbuffer, 0, inbuffer.Length, cipherText, 0);
Buffer.BlockCopy(cipherText, 0, result, posResult, cipherText.Length);
posResult += cipherText.Length;
}
des.Clear();
return(result);
}
/// <summary>
/// Convert privacy password into encryption key using packet authentication hash.
/// </summary>
/// <param name="secret">Privacy user secret</param>
/// <param name="engineId">Authoritative engine id of the snmp agent</param>
/// <param name="authProtocol">Authentication protocol</param>
/// <returns>Encryption key</returns>
/// <exception cref="SnmpPrivacyException">Thrown when key size is shorter then MinimumKeyLength</exception>
public byte[] PasswordToKey(byte[] secret, byte[] engineId, IAuthenticationDigest authProtocol)
{
// RFC 3414 - password length is minimum of 8 bytes long
if (secret == null || secret.Length < 8)
{
throw new SnmpPrivacyException("Invalid privacy secret length.");
}
byte[] encryptionKey = authProtocol.PasswordToKey(secret, engineId);
return(encryptionKey);
}
/// <summary>
/// Authenticate incoming packet
/// </summary>
/// <param name="authKey">Authentication key (not password)</param>
/// <param name="wholePacket">Received BER encoded SNMP version 3 packet</param>
/// <returns>True if packet is successfully authenticated, otherwise false.</returns>
public bool IsAuthentic(byte[] authKey, MutableByte wholePacket)
{
if (_authentication != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(_authentication);
if (authProto != null)
{
return(authProto.authenticateIncomingMsg(authKey, _authenticationParameters, wholePacket));
}
}
return(false); // Nothing to authenticate
}
/// <summary>
/// Convert privacy password into encryption key using packet authentication hash.
/// </summary>
/// <param name="secret">Privacy user secret</param>
/// <param name="engineId">Authoritative engine id of the snmp agent</param>
/// <param name="authProtocol">Authentication protocol</param>
/// <returns>Encryption key</returns>
/// <exception cref="SnmpPrivacyException">Thrown when key size is shorter then MinimumKeyLength</exception>
public byte[] PasswordToKey(byte[] secret, byte[] engineId, IAuthenticationDigest authProtocol)
{
if (secret == null || secret.Length < 8)
{
throw new SnmpPrivacyException("Invalid privacy secret length.");
}
byte[] key = authProtocol.PasswordToKey(secret, engineId);
if (key.Length < MinimumKeyLength)
{
key = ExtendShortKey(key, secret, engineId, authProtocol);
}
return(key);
}
/// <summary>Authenticate incoming packet</summary>
/// <param name="wholePacket">Received BER encoded SNMP version 3 packet</param>
/// <returns>True if packet is successfully authenticated, otherwise false.</returns>
public bool IsAuthentic(MutableByte wholePacket)
{
if (authentication != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = Security.Authentication.GetInstance(authentication);
if (authProto != null)
{
return(authProto.AuthenticateIncomingMessage(AuthenticationSecret, engineId, authenticationParameters, wholePacket));
}
}
return(false); // Nothing to authenticate
}
/// <summary>
/// Generate authentication key from authentication password and engine id
/// </summary>
/// <returns>Authentication key on success or null on failure</returns>
public byte[] GenerateAuthenticationKey()
{
if (_userSecurityModel.EngineId == null || _userSecurityModel.EngineId.Length <= 0)
return null;
if (_userSecurityModel.AuthenticationSecret == null || _userSecurityModel.AuthenticationSecret.Length <= 0)
return null;
if (_userSecurityModel.Authentication != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = Authentication.GetInstance(_userSecurityModel.Authentication);
if (authProto != null)
{
return authProto.PasswordToKey(_userSecurityModel.AuthenticationSecret, _userSecurityModel.EngineId);
}
}
return null;
}
/// <summary>
/// Extends the encryption key if key size returned by PasswordToKey is less then minimum
/// required by the encryption protocol.
/// </summary>
/// <remarks>
/// There is no need to call this method in a user application becuase PasswordToKey() method will
/// make the call if password it generates is too short.
/// </remarks>
/// <param name="shortKey">Encryption key</param>
/// <param name="password">Privacy password</param>
/// <param name="engineID">Authoritative engine id</param>
/// <param name="authProtocol">Authentication protocol class instance</param>
/// <returns>unaltered shortKey value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID,
IAuthenticationDigest authProtocol)
{
var length = shortKey.Length;
var extendedKey = new byte[MinimumKeyLength];
Buffer.BlockCopy(shortKey, 0, extendedKey, 0, shortKey.Length);
while (length < MinimumKeyLength)
{
var key =
authProtocol.PasswordToKey(shortKey,
engineID);
var copyBytes = Math.Min(MaximumKeyLength - length,
authProtocol.DigestLength);
Buffer.BlockCopy(key, 0, extendedKey, length, copyBytes);
length += copyBytes;
}
return(extendedKey);
}
/// <summary>
/// Generate authentication key from authentication password and engine id
/// </summary>
/// <returns>Authentication key on success or null on failure</returns>
public byte[] GenerateAuthenticationKey()
{
if (USM.EngineId == null || USM.EngineId.Length <= 0)
{
return(null);
}
if (USM.AuthenticationSecret == null || USM.AuthenticationSecret.Length <= 0)
{
return(null);
}
if (USM.Authentication != AuthenticationDigests.None)
{
IAuthenticationDigest authProto = SnmpSharpNet.Authentication.GetInstance(USM.Authentication);
if (authProto != null)
{
return(authProto.PasswordToKey(USM.AuthenticationSecret, USM.EngineId));
}
}
return(null);
}
/// <summary>
/// Encrypt ScopedPdu using TripleDES encryption protocol
/// </summary>
/// <param name="unencryptedData">Unencrypted ScopedPdu byte array</param>
/// <param name="offset">Offset to start encryption</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key. Key has to be at least 32 bytes is length</param>
/// <param name="engineBoots">Authoritative engine boots value</param>
/// <param name="engineTime">Authoritative engine time value.</param>
/// <param name="privacyParameters">
/// Privacy parameters out buffer. This field will be filled in with information
/// required to decrypt the information. Output length of this field is 8 bytes and space has to be reserved
/// in the USM header to store this information
/// </param>
/// <param name="authDigest">Authentication digest class reference. Used by TripleDES.</param>
/// <returns>Encrypted byte array</returns>
/// <exception cref="ArgumentOutOfRangeException">
/// Thrown when encryption key is null or length of the encryption key is too
/// short.
/// </exception>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots,
int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
privacyParameters = GetSalt(engineBoots);
var privParamHash = authDigest.ComputeHash(privacyParameters, 0, privacyParameters.Length);
privacyParameters = new byte[8];
Buffer.BlockCopy(privParamHash, 0, privacyParameters, 0, 8);
var iv = GetIV(key, privacyParameters);
byte[] encryptedData = null;
try
{
TripleDES tdes = new TripleDESCryptoServiceProvider();
tdes.Mode = CipherMode.CBC;
tdes.Padding = PaddingMode.None;
// normalize key - generated key is 32 bytes long, we need 24 bytes to encrypt
var normKey = new byte[24];
Buffer.BlockCopy(key, 0, normKey, 0, normKey.Length);
var transform = tdes.CreateEncryptor(normKey, iv);
if (length % 8 == 0)
{
encryptedData = transform.TransformFinalBlock(unencryptedData, offset, length);
}
else
{
var tmpbuffer = new byte[8 * (length / 8 + 1)];
Buffer.BlockCopy(unencryptedData, offset, tmpbuffer, 0, length);
encryptedData = transform.TransformFinalBlock(tmpbuffer, 0, tmpbuffer.Length);
}
}
catch (Exception ex)
{
throw new SnmpPrivacyException(ex,
"Exception was thrown while TripleDES privacy protocol was encrypting data\r\n" + ex);
}
return(encryptedData);
}
/// <summary>
/// Convert privacy password into encryption key using packet authentication hash.
/// </summary>
/// <param name="secret">Privacy user secret/password</param>
/// <param name="engineId">Authoritative engine id of the SNMP agent</param>
/// <param name="authProtocol">Authentication protocol</param>
/// <returns>Encryption key</returns>
/// <exception cref="SnmpPrivacyException">Thrown when user secret/password is shorter then MinimumKeyLength</exception>
public byte[] PasswordToKey(byte[] secret, byte[] engineId, IAuthenticationDigest authProtocol)
{
// RFC 3414 - password length is minimum of 8 bytes long
if (secret == null || secret.Length < 8)
throw new SnmpPrivacyException("Invalid privacy secret length.");
byte[] encryptionKey = authProtocol.PasswordToKey(secret, engineId);
if( encryptionKey.Length < MinimumKeyLength )
encryptionKey = ExtendShortKey(encryptionKey, secret, engineId, authProtocol);
return encryptionKey;
}
/// <summary>
/// Extends the encryption key if key size returned by PasswordToKey is less then minimum
/// required by the encryption protocol.
/// </summary>
/// <remarks>
/// There is no need to call this method in a user application becuase PasswordToKey() method will
/// make the call if password it generates is too short.
/// </remarks>
/// <param name="shortKey">Encryption key</param>
/// <param name="password">Privacy password</param>
/// <param name="engineID">Authoritative engine id</param>
/// <param name="authProtocol">Authentication protocol class instance</param>
/// <returns>unaltered shortKey value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID, IAuthenticationDigest authProtocol)
{
int length = shortKey.Length;
byte[] extendedKey = new byte[MinimumKeyLength];
Buffer.BlockCopy(shortKey, 0, extendedKey, 0, shortKey.Length);
while (length < MinimumKeyLength)
{
byte[] key =
authProtocol.PasswordToKey(shortKey,
engineID);
int copyBytes = Math.Min(MaximumKeyLength - length,
authProtocol.DigestLength);
Buffer.BlockCopy(key, 0, extendedKey, length, copyBytes);
length += copyBytes;
}
return extendedKey;
}
/// <summary>
/// Encrypt ScopedPdu using TripleDES encryption protocol
/// </summary>
/// <param name="unencryptedData">Unencrypted ScopedPdu byte array</param>
/// <param name="offset">Offset to start encryption</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key. Key has to be at least 32 bytes is length</param>
/// <param name="engineBoots">Authoritative engine boots value</param>
/// <param name="engineTime">Authoritative engine time value.</param>
/// <param name="privacyParameters">Privacy parameters out buffer. This field will be filled in with information
/// required to decrypt the information. Output length of this field is 8 bytes and space has to be reserved
/// in the USM header to store this information</param>
/// <param name="authDigest">Authentication digest class reference. Used by TripleDES.</param>
/// <returns>Encrypted byte array</returns>
/// <exception cref="ArgumentOutOfRangeException">Thrown when encryption key is null or length of the encryption key is too short.</exception>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots, int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
privacyParameters = GetSalt(engineBoots);
byte[] privParamHash = authDigest.ComputeHash(privacyParameters, 0, privacyParameters.Length);
privacyParameters = new byte[8];
Buffer.BlockCopy(privParamHash, 0, privacyParameters, 0, 8);
byte[] iv = GetIV(key, privacyParameters);
byte[] encryptedData = null;
try
{
TripleDES tdes = new TripleDESCryptoServiceProvider();
tdes.Mode = CipherMode.CBC;
tdes.Padding = PaddingMode.None;
// normalize key - generated key is 32 bytes long, we need 24 bytes to encrypt
byte[] normKey = new byte[24];
Buffer.BlockCopy(key, 0, normKey, 0, normKey.Length);
ICryptoTransform transform = tdes.CreateEncryptor(normKey, iv);
if ((length % 8) == 0)
{
encryptedData = transform.TransformFinalBlock(unencryptedData, offset, length);
}
else
{
byte[] tmpbuffer = new byte[8 * ((length / 8) + 1)];
Buffer.BlockCopy(unencryptedData, offset, tmpbuffer, 0, length);
encryptedData = transform.TransformFinalBlock(tmpbuffer, 0, tmpbuffer.Length);
}
}
catch (Exception ex)
{
throw new SnmpPrivacyException(ex, "Exception was thrown while TripleDES privacy protocol was encrypting data\r\n" + ex.ToString());
}
return encryptedData;
}
/// <summary>
/// Convert privacy password into encryption key using packet authentication hash.
/// </summary>
/// <param name="secret">Privacy user secret</param>
/// <param name="engineId">Authoritative engine id of the snmp agent</param>
/// <param name="authProtocol">Authentication protocol</param>
/// <returns>Encryption key</returns>
/// <exception cref="SnmpPrivacyException">Thrown when key size is shorter then MinimumKeyLength</exception>
public byte[] PasswordToKey(byte[] secret, byte[] engineId, IAuthenticationDigest authProtocol)
{
if (secret == null || secret.Length < 8)
throw new SnmpPrivacyException("Invalid privacy secret length.");
byte[] key = authProtocol.PasswordToKey(secret, engineId);
if (key.Length < MinimumKeyLength)
{
key = ExtendShortKey(key, secret, engineId, authProtocol);
}
return key;
}
/// <summary>
/// Decode SNMP version 3 packet. This method will perform authentication check and decode privacy protected <see cref="ScopedPdu"/>. This method will
/// not check for the timeliness of the packet, correct engine boot value or engine id because it does not have a reference to the engine time prior to this call.
/// </summary>
/// <param name="berBuffer">BER encoded SNMP version 3 packet buffer</param>
/// <param name="length">Buffer length</param>
public override int decode(byte[] berBuffer, int length)
{
MutableByte buffer = new MutableByte(berBuffer, length);
int offset = 0;
// let base class parse first sequence and SNMP version number
offset = base.decode(buffer, length);
// check for correct SNMP protocol version
if (_protocolVersion != (int)SnmpVersion.Ver3)
{
throw new SnmpInvalidVersionException("Expecting SNMP version 3.");
}
// now grab the global message data sequence header information
int len = 0;
byte asnType = AsnType.ParseHeader(buffer, ref offset, out len);
// check that packet size can accommodate the length specified in the header
if (len > (buffer.Length - offset))
{
throw new OverflowException("Packet is too small to contain the data described in the header.");
}
// retrieve message id
offset = _messageId.decode(buffer, offset);
// max message size
offset = _maxMessageSize.decode(buffer, offset);
// message flags
offset = _msgFlags.decode(buffer, offset);
// verify that a valid authentication/privacy configuration is present in the packet
if (_msgFlags.Authentication == false && _msgFlags.Privacy == true)
{
throw new SnmpException(SnmpException.UnsupportedNoAuthPriv, "SNMP version 3 noAuthPriv security combination is not supported.");
}
// security model code
offset = _securityModel.decode(buffer, offset);
// we only support USM. code = 0x03
if (_securityModel.Value != _userSecurityModel.Type)
{
throw new SnmpException(SnmpException.UnsupportedSecurityModel, "Class only support SNMP Version 3 User Security Model.");
}
// parse user security model
offset = _userSecurityModel.decode(buffer, offset);
// Authenticate message if authentication flag is set and packet is not a discovery packet
if (_msgFlags.Authentication && _userSecurityModel.EngineId.Length > 0)
{
// Authenticate packet
if (_userSecurityModel.AuthenticationParameters.Length != 12)
{
throw new SnmpAuthenticationException("Invalid authentication parameter field length.");
}
if (!_userSecurityModel.IsAuthentic(buffer))
{
throw new SnmpAuthenticationException("Authentication of the incoming packet failed.");
}
}
// Decode ScopedPdu if it is privacy protected and packet is not a discovery packet
if (_msgFlags.Privacy && _userSecurityModel.EngineId.Length > 0)
{
IPrivacyProtocol privacyProtocol = PrivacyProtocol.GetInstance(_userSecurityModel.Privacy);
if (privacyProtocol == null)
{
throw new SnmpException(SnmpException.UnsupportedPrivacyProtocol, "Privacy protocol requested is not supported.");
}
if (_userSecurityModel.PrivacyParameters.Length != privacyProtocol.PrivacyParametersLength)
{
throw new SnmpException(SnmpException.InvalidPrivacyParameterLength, "Invalid privacy parameters field length.");
}
// build privacy key
IAuthenticationDigest auth = Authentication.GetInstance(_userSecurityModel.Authentication);
if (auth == null)
{
throw new SnmpException(SnmpException.UnsupportedNoAuthPriv, "Invalid authentication protocol.");
}
byte[] pkey = auth.PasswordToKey(_userSecurityModel.PrivacySecret, _userSecurityModel.EngineId);
// extend key if it is too short
if (pkey.Length < privacyProtocol.MinimumKeyLength)
{
pkey = privacyProtocol.ExtendShortKey(pkey, new OctetString(_userSecurityModel.PrivacySecret), _userSecurityModel.EngineId, auth);
}
// Initialize a temporary OctetString class to hold encrypted ScopedPdu
OctetString encryptedScopedPdu = new OctetString();
offset = encryptedScopedPdu.decode(buffer, offset);
// decode encrypted packet
byte[] decryptedScopedPdu = privacyProtocol.Decrypt(encryptedScopedPdu, 0, encryptedScopedPdu.Length, pkey, _userSecurityModel.EngineBoots, _userSecurityModel.EngineTime, _userSecurityModel.PrivacyParameters);
int tempOffset = 0;
offset = _scopedPdu.decode(decryptedScopedPdu, tempOffset);
}
else
{
offset = _scopedPdu.decode(buffer, offset);
}
return(offset);
}
/// <summary>
/// Encode SNMP version 3 packet
/// </summary>
/// <remarks>
/// Before encoding the packet into a byte array you need to ensure all required information is
/// set. Examples of required information is request type, Vbs (Oid + values pairs), USM settings including
/// SecretName, authentication method and secret (if needed), privacy method and secret (if needed), etc.
/// </remarks>
/// <returns>Byte array BER encoded SNMP packet.</returns>
public override byte[] encode()
{
MutableByte buffer = new MutableByte();
// encode the global message data sequence header information
MutableByte globalMessageData = new MutableByte();
// if message id is 0 then generate a new, random message id
if (_messageId.Value == 0)
{
Random rand = new Random();
_messageId.Value = rand.Next(1, Int32.MaxValue);
}
// encode message id
_messageId.encode(globalMessageData);
// encode max message size
_maxMessageSize.encode(globalMessageData);
// message flags
_msgFlags.encode(globalMessageData);
// security model code
_securityModel.Value = _userSecurityModel.Type;
_securityModel.encode(globalMessageData);
// add global message data to the main buffer
// encode sequence header and add data
AsnType.BuildHeader(buffer, SnmpConstants.SMI_SEQUENCE, globalMessageData.Length);
buffer.Append(globalMessageData);
MutableByte packetHeader = new MutableByte(buffer);
// before going down this road, check if this is a discovery packet
OctetString savedUserName = new OctetString();
bool privacy = _msgFlags.Privacy;
bool authentication = _msgFlags.Authentication;
bool reportable = _msgFlags.Reportable;
if (_userSecurityModel.EngineId.Length <= 0)
{
// save USM settings prior to encoding a Discovery packet
savedUserName.Set(_userSecurityModel.SecurityName);
_userSecurityModel.SecurityName.Reset(); // delete security name for discovery packets
_msgFlags.Authentication = false;
_msgFlags.Privacy = false;
_msgFlags.Reportable = true;
}
_userSecurityModel.encode(buffer);
if (_userSecurityModel.EngineId.Length <= 0)
{
// restore saved USM values
_userSecurityModel.SecurityName.Set(savedUserName);
_msgFlags.Authentication = authentication;
_msgFlags.Privacy = privacy;
_msgFlags.Reportable = reportable;
}
// Check if privacy encryption is required
MutableByte encodedPdu = new MutableByte();
if (_msgFlags.Privacy && _userSecurityModel.EngineId.Length > 0)
{
IPrivacyProtocol privacyProtocol = PrivacyProtocol.GetInstance(_userSecurityModel.Privacy);
if (privacyProtocol == null)
{
throw new SnmpException(SnmpException.UnsupportedPrivacyProtocol, "Specified privacy protocol is not supported.");
}
// Get BER encoded ScopedPdu
MutableByte unencryptedPdu = new MutableByte();
_scopedPdu.encode(unencryptedPdu);
byte[] privacyParameters = null;
// we have to expand the key
IAuthenticationDigest auth = Authentication.GetInstance(_userSecurityModel.Authentication);
if (auth == null)
{
throw new SnmpException(SnmpException.UnsupportedNoAuthPriv, "Invalid authentication protocol. noAuthPriv mode not supported.");
}
byte[] pkey = privacyProtocol.PasswordToKey(_userSecurityModel.PrivacySecret, _userSecurityModel.EngineId, auth);
byte[] encryptedBuffer = privacyProtocol.Encrypt(unencryptedPdu, 0, unencryptedPdu.Length, pkey, _userSecurityModel.EngineBoots, _userSecurityModel.EngineTime, out privacyParameters, auth);
_userSecurityModel.PrivacyParameters.Set(privacyParameters);
OctetString encryptedOctetString = new OctetString(encryptedBuffer);
encryptedOctetString.encode(encodedPdu);
// now redo packet encoding
buffer.Reset();
buffer.Set(packetHeader);
_userSecurityModel.encode(buffer);
int preEncodedLength = encodedPdu.Length;
buffer.Append(encodedPdu);
if (_maxMessageSize.Value != 0)
{
// verify compliance with maximum message size
if ((encodedPdu.Length - preEncodedLength) > _maxMessageSize)
{
throw new SnmpException(SnmpException.MaximumMessageSizeExceeded, "ScopedPdu exceeds maximum message size.");
}
}
}
else
{
_scopedPdu.encode(encodedPdu);
buffer.Append(encodedPdu);
}
int preVersionLength = buffer.Length;
base.encode(buffer);
int versionHeaderLength = buffer.Length - preVersionLength;
if (_msgFlags.Authentication && _userSecurityModel.EngineId.Length > 0)
{
_userSecurityModel.Authenticate(ref buffer);
// Now re-encode the packet with the authentication information
_userSecurityModel.encode(packetHeader);
packetHeader.Append(encodedPdu);
base.encode(packetHeader);
buffer = packetHeader;
}
return(buffer);
}
/// <summary>
/// Some protocols support a method to extend the encryption or decryption key when supplied key
/// is too short.
/// </summary>
/// <param name="shortKey">Key that needs to be extended</param>
/// <param name="password">Privacy password as configured on the SNMP agent.</param>
/// <param name="engineID">Authoritative engine id. Value is retrieved as part of SNMP v3 discovery procedure</param>
/// <param name="authProtocol">Authentication protocol class instance cast as <see cref="IAuthenticationDigest"/></param>
/// <returns>Extended key value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID, IAuthenticationDigest authProtocol)
{
byte[] extKey = new byte[MinimumKeyLength];
int length = shortKey.Length;
for (int i = 0; i < length; i++)
{
extKey[i] = shortKey[i];
}
while (length < extKey.Length)
{
// fix the key hashing. Only hash upto the length of the *shortKey*
byte[] hash = authProtocol.ComputeHash(extKey, 0, length);
if (hash == null)
{
return(null);
}
int bytesToCopy = extKey.Length - length;
if (bytesToCopy > authProtocol.DigestLength)
{
bytesToCopy = authProtocol.DigestLength;
}
Buffer.BlockCopy(hash, 0, extKey, length, bytesToCopy);
length += bytesToCopy;
}
return(extKey);
}
/// <summary>
/// Encrypt <see cref="ScopedPdu"/> data BER encoded in a byte array.
/// </summary>
/// <param name="unencryptedData">BER encoded <see cref="ScopedPdu"/> byte array that needs to be encrypted</param>
/// <param name="offset">Offset within the BER encoded byte array to start encryption operation from.</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key</param>
/// <param name="engineBoots">Authoritative engine boots value. Retrieved as part of SNMP v3 discovery process.</param>
/// <param name="engineTime">Authoritative engine time value. Retrieved as part of SNMP v3 discovery process.</param>
/// <param name="privacyParameters">Byte array that will receive privacy parameters information that is the result of the
/// encryption procedure.</param>
/// <param name="authDigest">Authentication digest reference. Not used by AES protocol and can be null</param>
/// <returns>Byte array containing encrypted <see cref="ScopedPdu"/> BER encoded data</returns>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots, int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
// check the key before doing anything else
if (key == null || key.Length < _keyBytes)
throw new ArgumentOutOfRangeException("encryptionKey", "Invalid key length");
byte[] iv = new byte[16];
Int64 salt = NextSalt();
privacyParameters = new byte[PrivacyParametersLength];
byte[] bootsBytes = BitConverter.GetBytes(engineBoots);
iv[0] = bootsBytes[3];
iv[1] = bootsBytes[2];
iv[2] = bootsBytes[1];
iv[3] = bootsBytes[0];
byte[] timeBytes = BitConverter.GetBytes(engineTime);
iv[4] = timeBytes[3];
iv[5] = timeBytes[2];
iv[6] = timeBytes[1];
iv[7] = timeBytes[0];
// Set privacy parameters to the local 64 bit salt value
byte[] saltBytes = BitConverter.GetBytes(salt);
privacyParameters[0] = saltBytes[7];
privacyParameters[1] = saltBytes[6];
privacyParameters[2] = saltBytes[5];
privacyParameters[3] = saltBytes[4];
privacyParameters[4] = saltBytes[3];
privacyParameters[5] = saltBytes[2];
privacyParameters[6] = saltBytes[1];
privacyParameters[7] = saltBytes[0];
// Copy salt value to the iv array
Buffer.BlockCopy(privacyParameters, 0, iv, 8, 8);
Rijndael rm = new RijndaelManaged();
rm.KeySize = _keyBytes * 8;
rm.FeedbackSize = 128;
rm.BlockSize = 128;
// we have to use Zeros padding otherwise we get encrypt buffer size exception
rm.Padding = PaddingMode.Zeros;
rm.Mode = CipherMode.CFB;
// make sure we have the right key length
byte[] pkey = new byte[MinimumKeyLength];
Buffer.BlockCopy(key, 0, pkey, 0, MinimumKeyLength);
rm.Key = pkey;
rm.IV = iv;
ICryptoTransform cryptor = rm.CreateEncryptor();
byte[] encryptedData = cryptor.TransformFinalBlock(unencryptedData, offset, length);
// check if encrypted data is the same length as source data
if (encryptedData.Length != unencryptedData.Length)
{
// cut out the padding
byte[] tmp = new byte[unencryptedData.Length];
Buffer.BlockCopy(encryptedData, 0, tmp, 0, unencryptedData.Length);
return tmp;
}
return encryptedData;
}
/// <summary>
/// Operation not used by DES. Key length has to be 16 bytes of encryption/decryption operation will fail.
///
/// When called, shortKey is returned.
/// </summary>
/// <param name="shortKey">Encryption key</param>
/// <param name="password">Privacy password</param>
/// <param name="engineID">Authoritative engine id</param>
/// <param name="authProtocol">Authentication protocol class instance</param>
/// <returns>unaltered shortKey value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID, IAuthenticationDigest authProtocol)
{
return(shortKey);
}
/// <summary>
/// Operation not used by DES. Key length has to be 16 bytes of encryption/decryption operation will fail.
///
/// When called, shortKey is returned.
/// </summary>
/// <param name="shortKey">Encryption key</param>
/// <param name="password">Privacy password</param>
/// <param name="engineID">Authoritative engine id</param>
/// <param name="authProtocol">Authentication protocol class instance</param>
/// <returns>unaltered shortKey value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID, IAuthenticationDigest authProtocol)
{
return shortKey;
}
/// <summary>Encode SNMP version 3 packet</summary>
/// <param name="authKey">Authentication key (not password)</param>
/// <param name="privKey">Privacy key (not password)</param>
/// <remarks>
/// Before encoding the packet into a byte array you need to ensure all required information is
/// set. Examples of required information is request type, Vbs (Oid + values pairs), USM settings including
/// SecretName, authentication method and secret (if needed), privacy method and secret (if needed), etc.
/// </remarks>
/// <returns>Byte array BER encoded SNMP packet.</returns>
public byte[] Encode(byte[] authKey, byte[] privKey)
{
MutableByte buffer = new MutableByte();
// encode the global message data sequence header information
MutableByte globalMessageData = new MutableByte();
// if message id is 0 then generate a new, random message id
if (messageId.Value == 0)
{
Random rand = new Random();
messageId.Value = rand.Next(1, int.MaxValue);
}
// encode message id
messageId.Encode(globalMessageData);
// encode max message size
maxMessageSize.Encode(globalMessageData);
// message flags
messageFlags.Encode(globalMessageData);
// security model code
securityModel.Value = userSecurityModel.Type;
securityModel.Encode(globalMessageData);
// add global message data to the main buffer
// encode sequence header and add data
AsnType.BuildHeader(buffer, SnmpConstants.SmiSequence, globalMessageData.Length);
buffer.Append(globalMessageData);
MutableByte packetHeader = new MutableByte(buffer);
// before going down this road, check if this is a discovery packet
OctetString savedUserName = new OctetString();
bool privacy = messageFlags.Privacy;
bool authentication = messageFlags.Authentication;
bool reportable = messageFlags.Reportable;
if (userSecurityModel.EngineId.Length <= 0)
{
// save USM settings prior to encoding a Discovery packet
savedUserName.Set(userSecurityModel.SecurityName);
userSecurityModel.SecurityName.Reset(); // delete security name for discovery packets
messageFlags.Authentication = false;
messageFlags.Privacy = false;
messageFlags.Reportable = true;
}
userSecurityModel.Encode(buffer);
if (userSecurityModel.EngineId.Length <= 0)
{
// restore saved USM values
userSecurityModel.SecurityName.Set(savedUserName);
messageFlags.Authentication = authentication;
messageFlags.Privacy = privacy;
messageFlags.Reportable = reportable;
}
// Check if privacy encryption is required
MutableByte encodedPdu = new MutableByte();
if (messageFlags.Privacy && userSecurityModel.EngineId.Length > 0)
{
IPrivacyProtocol privacyProtocol = PrivacyProtocol.GetInstance(userSecurityModel.Privacy);
if (privacyProtocol == null)
{
throw new SnmpException(SnmpException.EErrorCode.UnsupportedPrivacyProtocol, "Specified privacy protocol is not supported.");
}
// Get BER encoded ScopedPdu
MutableByte unencryptedPdu = new MutableByte();
scopedPdu.Encode(unencryptedPdu);
// we have to expand the key
IAuthenticationDigest auth = Authentication.GetInstance(userSecurityModel.Authentication);
if (auth == null)
{
throw new SnmpException(SnmpException.EErrorCode.UnsupportedNoAuthPriv, "Invalid authentication protocol. noAuthPriv mode not supported.");
}
byte[] encryptedBuffer = privacyProtocol.Encrypt(unencryptedPdu, 0, unencryptedPdu.Length, privKey, userSecurityModel.EngineBoots, userSecurityModel.EngineTime, out byte[] privacyParameters, auth);
userSecurityModel.PrivacyParameters.Set(privacyParameters);
OctetString encryptedOctetString = new OctetString(encryptedBuffer);
encryptedOctetString.Encode(encodedPdu);
// now redo packet encoding
buffer.Reset();
buffer.Set(packetHeader);
userSecurityModel.Encode(buffer);
int preEncodedLength = encodedPdu.Length;
buffer.Append(encodedPdu);
if (maxMessageSize.Value != 0)
{
// verify compliance with maximum message size
if ((encodedPdu.Length - preEncodedLength) > maxMessageSize)
{
throw new SnmpException(SnmpException.EErrorCode.MaximumMessageSizeExceeded, "ScopedPdu exceeds maximum message size.");
}
}
}
else
{
scopedPdu.Encode(encodedPdu);
buffer.Append(encodedPdu);
}
Encode(buffer);
if (messageFlags.Authentication && userSecurityModel.EngineId.Length > 0)
{
userSecurityModel.Authenticate(authKey, ref buffer);
// Now re-encode the packet with the authentication information
userSecurityModel.Encode(packetHeader);
packetHeader.Append(encodedPdu);
Encode(packetHeader);
buffer = packetHeader;
}
return(buffer);
}
/// <summary>Encrypt <see cref="ScopedPdu"/> data BER encoded in a byte array.</summary>
/// <param name="unencryptedData">BER encoded <see cref="ScopedPdu"/> byte array that needs to be encrypted</param>
/// <param name="offset">Offset within the BER encoded byte array to start encryption operation from.</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key</param>
/// <param name="engineBoots">Authoritative engine boots value. Retrieved as part of SNMP v3 discovery process.</param>
/// <param name="engineTime">Authoritative engine time value. Retrieved as part of SNMP v3 discovery process.</param>
/// <param name="privacyParameters">Byte array that will receive privacy parameters information that is the result of the
/// encryption procedure.</param>
/// <param name="authDigest">Authentication digest reference. Not used by AES protocol and can be null</param>
/// <returns>Byte array containing encrypted <see cref="ScopedPdu"/> BER encoded data</returns>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots, int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
// check the key before doing anything else
if (key == null || key.Length < keyBytes)
{
throw new ArgumentOutOfRangeException(nameof(key), "Invalid key length");
}
byte[] iv = new byte[16];
var salt = NextSalt();
privacyParameters = new byte[PrivacyParametersLength];
byte[] bootsBytes = BitConverter.GetBytes(engineBoots);
iv[0] = bootsBytes[3];
iv[1] = bootsBytes[2];
iv[2] = bootsBytes[1];
iv[3] = bootsBytes[0];
byte[] timeBytes = BitConverter.GetBytes(engineTime);
iv[4] = timeBytes[3];
iv[5] = timeBytes[2];
iv[6] = timeBytes[1];
iv[7] = timeBytes[0];
// Set privacy parameters to the local 64 bit salt value
byte[] saltBytes = BitConverter.GetBytes(salt);
privacyParameters[0] = saltBytes[7];
privacyParameters[1] = saltBytes[6];
privacyParameters[2] = saltBytes[5];
privacyParameters[3] = saltBytes[4];
privacyParameters[4] = saltBytes[3];
privacyParameters[5] = saltBytes[2];
privacyParameters[6] = saltBytes[1];
privacyParameters[7] = saltBytes[0];
// Copy salt value to the iv array
Buffer.BlockCopy(privacyParameters, 0, iv, 8, 8);
Rijndael rm = new RijndaelManaged
{
KeySize = keyBytes * 8,
FeedbackSize = 128,
BlockSize = 128,
// we have to use Zeros padding otherwise we get encrypt buffer size exception
Padding = PaddingMode.Zeros,
Mode = CipherMode.CFB,
};
// make sure we have the right key length
byte[] pkey = new byte[MinimumKeyLength];
Buffer.BlockCopy(key, 0, pkey, 0, MinimumKeyLength);
rm.Key = pkey;
rm.IV = iv;
ICryptoTransform cryptor = rm.CreateEncryptor();
byte[] encryptedData = cryptor.TransformFinalBlock(unencryptedData, offset, length);
// check if encrypted data is the same length as source data
if (encryptedData.Length != unencryptedData.Length)
{
// cut out the padding
byte[] tmp = new byte[unencryptedData.Length];
Buffer.BlockCopy(encryptedData, 0, tmp, 0, unencryptedData.Length);
return(tmp);
}
return(encryptedData);
}
/// <summary>
/// Encrypt ScopedPdu using DES encryption protocol
/// </summary>
/// <param name="unencryptedData">Unencrypted ScopedPdu byte array</param>
/// <param name="offset">Offset to start encryption</param>
/// <param name="length">Length of data to encrypt</param>
/// <param name="key">Encryption key. Key has to be at least 32 bytes is length</param>
/// <param name="engineBoots">Authoritative engine boots value</param>
/// <param name="engineTime">Authoritative engine time value. Not used for DES</param>
/// <param name="privacyParameters">Privacy parameters out buffer. This field will be filled in with information
/// required to decrypt the information. Output length of this field is 8 bytes and space has to be reserved
/// in the USM header to store this information</param>
/// <param name="authDigest">Authentication digest class reference. Not used by DES and can be null.</param>
/// <returns>Encrypted byte array</returns>
/// <exception cref="ArgumentOutOfRangeException">Thrown when encryption key is null or length of the encryption key is too short.</exception>
public byte[] Encrypt(byte[] unencryptedData, int offset, int length, byte[] key, int engineBoots, int engineTime, out byte[] privacyParameters, IAuthenticationDigest authDigest)
{
if (key == null || key.Length < MinimumKeyLength)
throw new ArgumentOutOfRangeException("encryptionKey", "Encryption key length has to 32 bytes or more.");
privacyParameters = GetSalt(engineBoots);
byte[] iv = GetIV(key, privacyParameters);
// DES uses 8 byte keys but we need 16 to encrypt ScopedPdu. Get first 8 bytes and use them as encryption key
byte[] outKey = GetKey(key);
int div = (int)Math.Floor(length / 8.0);
if ((length % 8) != 0)
div += 1;
int newLength = div * 8;
byte[] result = new byte[newLength];
byte[] buffer = new byte[newLength];
byte[] inbuffer = new byte[8];
byte[] cipherText = iv;
int posIn = 0;
int posResult = 0;
Buffer.BlockCopy(unencryptedData, offset, buffer, 0, length);
DES des = new DESCryptoServiceProvider();
des.Mode = CipherMode.ECB;
des.Padding = PaddingMode.None;
ICryptoTransform transform = des.CreateEncryptor(outKey, null);
for (int b = 0; b < div; b++)
{
for (int i = 0; i < 8; i++)
{
inbuffer[i] = (byte)(buffer[posIn] ^ cipherText[i]);
posIn++;
}
transform.TransformBlock(inbuffer, 0, inbuffer.Length, cipherText, 0);
Buffer.BlockCopy(cipherText, 0, result, posResult, cipherText.Length);
posResult += cipherText.Length;
}
des.Clear();
return result;
}
/// <summary>
/// Some protocols support a method to extend the encryption or decryption key when supplied key
/// is too short.
/// </summary>
/// <param name="shortKey">Key that needs to be extended</param>
/// <param name="password">Privacy password as configured on the SNMP agent.</param>
/// <param name="engineID">Authoritative engine id. Value is retrieved as part of SNMP v3 discovery procedure</param>
/// <param name="authProtocol">Authentication protocol class instance cast as <see cref="IAuthenticationDigest"/></param>
/// <returns>Extended key value</returns>
public byte[] ExtendShortKey(byte[] shortKey, byte[] password, byte[] engineID, IAuthenticationDigest authProtocol)
{
byte[] extKey = new byte[MinimumKeyLength];
byte[] lastKeyBuf = new byte[shortKey.Length];
Array.Copy(shortKey, lastKeyBuf, shortKey.Length);
int keyLen = shortKey.Length > MinimumKeyLength ? MinimumKeyLength : shortKey.Length;
Array.Copy(shortKey, extKey, keyLen);
while (keyLen < MinimumKeyLength)
{
byte[] tmpBuf = authProtocol.PasswordToKey(lastKeyBuf, engineID);
if (tmpBuf == null)
{
return null;
}
if (tmpBuf.Length <= (MinimumKeyLength - keyLen))
{
Array.Copy(tmpBuf, 0, extKey, keyLen, tmpBuf.Length);
keyLen += tmpBuf.Length;
}
else
{
Array.Copy(tmpBuf, 0, extKey, keyLen, MinimumKeyLength - keyLen);
keyLen += (MinimumKeyLength - keyLen);
}
lastKeyBuf = new byte[tmpBuf.Length];
Array.Copy(tmpBuf, lastKeyBuf, tmpBuf.Length);
}
return extKey;
}
