public void AssemblyFeature()
{
AssemblyDocument oAssDoc = (AssemblyDocument)_InvApplication.ActiveDocument;
AssemblyComponentDefinition oAsmDef = oAssDoc.ComponentDefinition;
// Create a sketch on the XY workplane.
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oAsmDef.Sketches.Add(oAsmDef.WorkPlanes[3]);
TransientGeometry oTG = default(TransientGeometry);
oTG = _InvApplication.TransientGeometry;
// Draw a rectangle.
oSketch.SketchLines.AddAsTwoPointRectangle(oTG.CreatePoint2d(0.1, 0.1), oTG.CreatePoint2d(1, 0.5));
// Create a profile
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
// Create the extrusion.
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oAsmDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kCutOperation);
oExtrudeDef.SetDistanceExtent("2 cm", PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
oAsmDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
private void ExtrudeSketch(int x, int y)
{
//PartDocument oPartDoc = default(PartDocument);
//oPartDoc = (PartDocument)_invApp.Documents.Add(Inventor.DocumentTypeEnum.kPartDocumentObject,_invApp.FileManager.GetTemplateFile(Inventor.DocumentTypeEnum.kPartDocumentObject));
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[1]);
oSketch.SketchLines.AddAsTwoPointRectangle(_invApp.TransientGeometry.CreatePoint2d(-x, -y), _invApp.TransientGeometry.CreatePoint2d(x, y));
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(5, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
private void Feature3(int x, int y)
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
oPartDoc.UnitsOfMeasure.LengthUnits = Inventor.UnitsTypeEnum.kMillimeterLengthUnits;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[3]);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), 6);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), 17.5);
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(3, Inventor.PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
private void triangleSticker(ref PartDocument pDoc, double heigth, double width, string txt = "", double thickness = 0.01)
{
PartComponentDefinition compDef = pDoc.ComponentDefinition;
PlanarSketch ps = compDef.Sketches.Add(compDef.WorkPlanes[3]);
SketchLine line1 = ps.SketchLines.AddByTwoPoints(m_TG.CreatePoint2d(-width / 20, -heigth / 30), m_TG.CreatePoint2d(width / 20, -heigth / 30));
SketchLine line2 = ps.SketchLines.AddByTwoPoints(line1.StartSketchPoint, m_TG.CreatePoint2d(0, heigth / 30 * 2));
ps.SketchLines.AddByTwoPoints(line2.EndSketchPoint, line1.EndSketchPoint);
Profile pr = ps.Profiles.AddForSolid();
ExtrudeDefinition extDef = compDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(pr, PartFeatureOperationEnum.kNewBodyOperation);
extDef.SetDistanceExtent(thickness / 10, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extr = compDef.Features.ExtrudeFeatures.Add(extDef);
extr.Appearance = InvDoc.u.createColor(pDoc, "red_", "красный_", 255, 0, 0);
if (txt != "")
{
ps = compDef.Sketches.Add(extr.EndFaces[1]);
Inventor.TextBox tb = ps.TextBoxes.AddFitted(m_TG.CreatePoint2d(), txt);
tb.HorizontalJustification = HorizontalTextAlignmentEnum.kAlignTextCenter;
tb.VerticalJustification = VerticalTextAlignmentEnum.kAlignTextMiddle;
tb.SingleLineText = false;
//tb.Rotation = Math.PI;
if (mirror)
{
tb.Rotation = Math.PI;
}
EmbossFeature emb = compDef.Features.EmbossFeatures.AddEmbossFromFace(ps.Profiles.AddForSolid(false, ps.TextBoxes), 0.0005, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
emb.Appearance = InvDoc.u.createColor(pDoc, "black_", "черный_", 0, 0, 0);
}
}
private void CreatePart_Click(object sender, EventArgs e)
{
if (inventor == null)
{
MessageBox.Show("No inventor instance detected", "error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
PartDocument doc = inventor.Documents.Add(DocumentTypeEnum.kPartDocumentObject, null, true) as PartDocument;
doc.PropertySets["{F29F85E0-4FF9-1068-AB91-08002B27B3D9}"]["Author"].Value = "Vladyslav Romanchuk";
//User-defined property
doc.PropertySets["{D5CDD505-2E9C-101B-9397-08002B2CF9AE}"].Add("Parts R Us", "Supplier");
PartComponentDefinition partDefinition = (PartComponentDefinition)doc.ComponentDefinition;
// Create a 2D sketch on the X-Y plane.
PlanarSketch sketch1 = (PlanarSketch)partDefinition.Sketches.Add(partDefinition.WorkPlanes[3]);
TransientGeometry tg = inventor.TransientGeometry;
Point2d[] points = new Point2d[5] {
tg.CreatePoint2d(0, 0), tg.CreatePoint2d(0, 20), tg.CreatePoint2d(20, 20), tg.CreatePoint2d(20, -10), tg.CreatePoint2d(10, -10)
};
SketchLine[] lines = new SketchLine[5];
lines[0] = sketch1.SketchLines.AddByTwoPoints(points[0], points[1]);
for (int i = 1; i < lines.Length - 1; i++)
{
lines[i] = sketch1.SketchLines.AddByTwoPoints(lines[i - 1].EndSketchPoint, points[i + 1]);
}
sketch1.SketchArcs.AddByCenterStartEndPoint(tg.CreatePoint2d(10, 0), lines[3].EndSketchPoint, lines[0].StartSketchPoint, false);
//Extrude
Profile profile = sketch1.Profiles.AddForSolid();
ExtrudeDefinition extrudeDefinition = partDefinition.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile, PartFeatureOperationEnum.kNewBodyOperation);
extrudeDefinition.SetDistanceExtent(6, PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
ExtrudeFeature extrude = (ExtrudeFeature)partDefinition.Features.ExtrudeFeatures.Add(extrudeDefinition);
//second scatch
Face topCap = extrude.EndFaces[1];
sketch1 = partDefinition.Sketches.Add(topCap, false);
Point2d center = sketch1.ModelToSketchSpace(tg.CreatePoint(2.5, 1.5, 1.5));
SketchCircle Circle = sketch1.SketchCircles.AddByCenterRadius(center, 1);
profile = sketch1.Profiles.AddForSolid(true, null, null);
extrudeDefinition = partDefinition.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile, PartFeatureOperationEnum.kJoinOperation);
extrudeDefinition.SetDistanceExtent(4, PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
extrude = (ExtrudeFeature)partDefinition.Features.ExtrudeFeatures.Add(extrudeDefinition);
Edges cylinderEdges = extrude.SideFaces[1].Edges;
EdgeCollection filletEdges = inventor.TransientObjects.CreateEdgeCollection(null);
//foreach (var el in cylinderEdges)
// filletEdges.Add(el);
filletEdges.Add(cylinderEdges[2]);
//adding fillet
partDefinition.Features.FilletFeatures.AddSimple(filletEdges, 0.25, false, false, false, false, false, true);
//doc.SaveAs("D:\\SaveTest2.ipt", false);
}
// create a feature
private void createFeature()
{
PartDocument oDoc = mApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject,
mApp.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject,
SystemOfMeasureEnum.kDefaultSystemOfMeasure,
DraftingStandardEnum.kDefault_DraftingStandard, null),
true) as PartDocument;
// Get the XZ Plane
WorkPlane oWorkPlane = oDoc.ComponentDefinition.WorkPlanes[2];
PlanarSketch oSketch = oDoc.ComponentDefinition.Sketches.Add(oWorkPlane, false);
TransientGeometry oTG = mApp.TransientGeometry;
//Create some transient points used for defining the lines (see BRep Module)
Point2d[] oPoints = new Point2d[5];
oPoints[0] = oTG.CreatePoint2d(0, 0);
oPoints[1] = oTG.CreatePoint2d(-10, 0);
oPoints[2] = oTG.CreatePoint2d(-10, -10);
oPoints[3] = oTG.CreatePoint2d(5, -10);
oPoints[4] = oTG.CreatePoint2d(5, -5);
//Add the sketchlines, coincident constraints will be created automatically
//since the "Line.EndSketchPoint" are provided each time we create a new line
SketchLine[] oLines = new SketchLine[5];
oLines[0] = oSketch.SketchLines.AddByTwoPoints(oPoints[0], oPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, oPoints[2]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, oPoints[3]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oPoints[4]);
oSketch.SketchArcs.AddByCenterStartEndPoint(oTG.CreatePoint2d(0, -5), oLines[3].EndSketchPoint, oLines[0].StartSketchPoint, true);
//Create a profile for the extrusion, here no need to worry since there is only
//a single profile that is possible
Profile oProfile = oSketch.Profiles.AddForSolid(true, null, null);
// Definition Way:
PartComponentDefinition oPartDocDef = oDoc.ComponentDefinition;
// get ExtrudeFeatures collection
ExtrudeFeatures extrudes = oPartDocDef.Features.ExtrudeFeatures;
// Create an extrude definition in the new surface body
ExtrudeDefinition extrudeDef = extrudes.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
// Modify the extent
extrudeDef.SetDistanceExtent(1, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
// Create the extrusion.
ExtrudeFeature extrude = extrudes.Add(extrudeDef);
}
internal override void Create_BR(TransientGeometry TG, ref PlanarSketch sketch, EdgeCollection eColl, ref Face B_face, ref Face E_face, ref PartComponentDefinition partDef)
{
sketch.SketchCircles.AddByCenterRadius(TG.CreatePoint2d(), Radius);
Profile profile = sketch.Profiles.AddForSolid();
ExtrudeDefinition extrude = partDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile, PartFeatureOperationEnum.kNewBodyOperation);
extrude.SetDistanceExtent(Length, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrudeFeature = partDef.Features.ExtrudeFeatures.Add(extrude);
sketch = partDef.Sketches.Add(extrudeFeature.EndFaces[1]);
Start_face = extrudeFeature.StartFaces[1];
End_face = extrudeFeature.EndFaces[1];
Side_face = extrudeFeature.SideFaces[1];
}
private Inventor.ExtrudeFeature CreateFlangeExtrustion(ref Inventor.PartDocument PartDocument, string FlangeDiaOD, string FlangeDiaID, string FlangeThickness)
{
Inventor.UnitsOfMeasure UnitsOfMeasure;
Inventor.PlanarSketch Sketch;
Inventor.TransientGeometry TransientGeometry;
Inventor.SketchCircle SketchCircle;
Inventor.WorkPoint WorkPoint;
Inventor.WorkPlane BaseWorkPlane;
Inventor.RadiusDimConstraint RadiusDimConstraint = null;
Inventor.SketchEntity SketchEntity;
Inventor.ObjectCollection SketchObjectCollection;
Inventor.Profile Profile;
Inventor.ExtrudeDefinition ExtrudeDefinition;
Inventor.ExtrudeFeature ExtrudeFeature = null;
SketchObjectCollection = InvApp.TransientObjects.CreateObjectCollection();
UnitsOfMeasure = PartDocument.UnitsOfMeasure;
double DiaOD = 0, DiaID = 0, Thickness = 0;
DiaOD = UnitsOfMeasure.GetValueFromExpression(FlangeDiaOD, Inventor.UnitsTypeEnum.kMillimeterLengthUnits);
DiaID = UnitsOfMeasure.GetValueFromExpression(FlangeDiaID, Inventor.UnitsTypeEnum.kMillimeterLengthUnits);
Thickness = UnitsOfMeasure.GetValueFromExpression(FlangeThickness, Inventor.UnitsTypeEnum.kMillimeterLengthUnits);
TransientGeometry = InvApp.TransientGeometry;
WorkPoint = PartDocument.ComponentDefinition.WorkPoints[1];
BaseWorkPlane = GetPartDocumentWorkPlane(ref PartDocument, "XY");
Sketch = PartDocument.ComponentDefinition.Sketches.Add(BaseWorkPlane, false);
SketchEntity = Sketch.AddByProjectingEntity(WorkPoint);
SketchCircle = Sketch.SketchCircles.AddByCenterRadius(TransientGeometry.CreatePoint2d(0, 0), DiaOD / 2);
RadiusDimConstraint = Sketch.DimensionConstraints.AddRadius((Inventor.SketchEntity)SketchCircle, TransientGeometry.CreatePoint2d(0, 0), false);
Sketch.GeometricConstraints.AddCoincident(SketchEntity, (Inventor.SketchEntity)SketchCircle.CenterSketchPoint);
RadiusDimConstraint = null;
SketchCircle = null;
SketchCircle = Sketch.SketchCircles.AddByCenterRadius(TransientGeometry.CreatePoint2d(0, 0), DiaID / 2);
RadiusDimConstraint = Sketch.DimensionConstraints.AddRadius((Inventor.SketchEntity)SketchCircle, TransientGeometry.CreatePoint2d(0, 0), false);
Sketch.GeometricConstraints.AddCoincident(SketchEntity, (Inventor.SketchEntity)SketchCircle.CenterSketchPoint);
SketchObjectCollection.Add(SketchCircle);
Profile = Sketch.Profiles.AddForSolid(true, SketchObjectCollection);
ExtrudeDefinition = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.CreateExtrudeDefinition(Profile, Inventor.PartFeatureOperationEnum.kNewBodyOperation);
ExtrudeDefinition.SetDistanceExtent(Thickness, Inventor.PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.Add(ExtrudeDefinition);
ExtrudeFeature.Name = "FlangeBase";
return(ExtrudeFeature);
}
private void createPart2()
{
// create a new part
PartDocument oDoc = (PartDocument)mApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oDef = oDoc.ComponentDefinition;
TransientGeometry oTG = mApp.TransientGeometry;
// create sketch elements
PlanarSketch oSketch = oDef.Sketches.Add(oDef.WorkPlanes[3]);
oSketch.SketchLines.AddAsTwoPointRectangle(oTG.CreatePoint2d(-5, -5), oTG.CreatePoint2d(5, 5));
SketchPoint oSketchPt = oSketch.SketchPoints.Add(oTG.CreatePoint2d(0, 0));
Profile oProfile = oSketch.Profiles.AddForSolid();
// create a plate with a hole feature
ExtrudeDefinition oExtrudDef = oDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudDef.SetDistanceExtent(1, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrudeF = oDef.Features.ExtrudeFeatures.Add(oExtrudDef);
// Create an object collection for the hole center points.
ObjectCollection oHoleCenters = default(ObjectCollection);
oHoleCenters = mApp.TransientObjects.CreateObjectCollection();
oHoleCenters.Add(oSketchPt);
// create hole feature
HolePlacementDefinition oHPdef = (HolePlacementDefinition)oDef.Features.HoleFeatures.CreateSketchPlacementDefinition(oHoleCenters);
HoleFeature oHoleF = oDef.Features.HoleFeatures.AddDrilledByThroughAllExtent(oHPdef, "2", PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
Face oFace = oHoleF.SideFaces[1];
AttributeSet oAttSet = default(AttributeSet);
Inventor.Attribute oAtt = null;
oAttSet = oFace.AttributeSets.Add("demoAttset");
oAtt = oAttSet.Add("demoAtt", ValueTypeEnum.kStringType, "namedEdge");
if (System.IO.File.Exists("c:\temp\test2.ipt"))
{
System.IO.File.Delete("c:\temp\test2.ipt");
}
oDoc.SaveAs("c:\\temp\\test2.ipt", false);
}
/// <summary>
/// Ступень 2
/// </summary>
private void BuildStem2()
{
PlanarSketch StemSketch2 = _inventorApi.MakeNewSketch(3,
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value);// второй параметр отодвигает по Z координате на заданную длину.
_inventorApi.DrawCircle(ValParameters.GetParameter(ParameterType.RadiusSecondLevel).Value, StemSketch2, _curPoint);
ExtrudeDefinition extrudeDef2 =
_inventorApi.PartDefinition.
Features.
ExtrudeFeatures.
CreateExtrudeDefinition(StemSketch2.Profiles.AddForSolid(), PartFeatureOperationEnum.kJoinOperation);
extrudeDef2.SetDistanceExtent(ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrude2 = _inventorApi.PartDefinition.Features.ExtrudeFeatures.Add(extrudeDef2);
}
internal override void Create_BR(TransientGeometry TG, ref PlanarSketch sketch, EdgeCollection eColl, ref Face B_face, ref Face E_face, ref PartComponentDefinition partDef)
{
sketch.SketchLines.AddAsPolygon(Number_of_Edges, TG.CreatePoint2d(), TG.CreatePoint2d(Radius), is_Inscribed);
Profile profile = sketch.Profiles.AddForSolid();
ExtrudeDefinition extrude = partDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile, PartFeatureOperationEnum.kNewBodyOperation);
extrude.SetDistanceExtent(Length, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrudeFeature = partDef.Features.ExtrudeFeatures.Add(extrude);
sketch = partDef.Sketches.Add(extrudeFeature.EndFaces[1]);
Start_face = extrudeFeature.StartFaces[1];
End_face = extrudeFeature.EndFaces[1];
foreach (Face side in extrudeFeature.SideFaces)
{
Side_faces.Add(side);
}
}
/// <summary>
/// Ступень 1
/// </summary>
private void BuildStem1()
{
PlanarSketch StemSketch = _inventorApi.MakeNewSketch(3, 0); //[1 - ZY; 2 - ZX; 3 - XY]
Point2d point = _inventorApi.TransientGeometry.CreatePoint2d(0, 0); //построен эскиз
_inventorApi.DrawCircle(ValParameters.GetParameter(ParameterType.RadiusFirstLevel).Value, StemSketch, point);
ExtrudeDefinition extrudeDef =
_inventorApi.PartDefinition.
Features.
ExtrudeFeatures.
CreateExtrudeDefinition(StemSketch.Profiles.AddForSolid(), PartFeatureOperationEnum.kJoinOperation);
extrudeDef.SetDistanceExtent(ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value,
PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrude = _inventorApi.PartDefinition.Features.ExtrudeFeatures.Add(extrudeDef);
}
/// <summary>
/// Зубья вала.
/// </summary>
private void BuildTeeth()
{
//Многоугольник для выдавливания
PlanarSketch StemSketchQ = MakeNewSketch(3,
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value +
ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value);// второй параметр отодвигает по Z координате на заданную длину.
Point2d pointQ = _inventorApi.TransientGeometry.CreatePoint2d(ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value + 3, 0);
Point2d CenterPointQ = _inventorApi.TransientGeometry.CreatePoint2d(ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value, 0);
DrawPolygon(pointQ, StemSketchQ, CenterPointQ);
ExtrudeDefinition extrudeDefQ =
_inventorApi.PartDefinition.
Features.
ExtrudeFeatures.
CreateExtrudeDefinition(StemSketchQ.Profiles.AddForSolid(), PartFeatureOperationEnum.kCutOperation);
extrudeDefQ.SetDistanceExtent(
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value,
PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrudeQ = _inventorApi.PartDefinition.Features.ExtrudeFeatures.Add(extrudeDefQ);
//Базовые оси
//для создания массива.
WorkAxis XAxis = _inventorApi.PartDefinition.WorkAxes[1];
WorkAxis YAxis = _inventorApi.PartDefinition.WorkAxes[2];
WorkAxis ZAxis = _inventorApi.PartDefinition.WorkAxes[3];
//Create an object collection
ObjectCollection objectCollection = _inventorApi.CreateObjectCollection();
objectCollection.Add(extrudeQ);
_inventorApi.PartDefinition.Features.CircularPatternFeatures.Add(
objectCollection,
ZAxis,
true,
(int)(ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value / 1.5),
"360 deg",
true,
PatternComputeTypeEnum.kAdjustToModelCompute);
}
private void ExtrudeDoub(int x, int y)
{
try
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures[1];
oExtrude.SetDistanceExtent(x, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
Random r = new Random();
int rand = r.Next(1, 20);
if (rand > 18)
{
movrot.ChangeView(1, 0, 0, apply: false);
}
}
catch (System.ArgumentException)
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[1]);
oSketch.SketchLines.AddAsTwoPointRectangle(_invApp.TransientGeometry.CreatePoint2d(-x, -y), _invApp.TransientGeometry.CreatePoint2d(x, y));
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(x, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
}
/// <summary>
/// Ступень 4
/// </summary>
private void BuildStem4()
{
PlanarSketch StemSketch4 = _inventorApi.MakeNewSketch(3,
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value +
ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value +
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value);// второй параметр отодвигает по Z координате на заданную длину.
// transientGeometry = invApp.TransientGeometry;
// Point2d point2 = transientGeometry.CreatePoint2d(0, 0); //построен эскиз
_inventorApi.DrawCircle(ValParameters.GetParameter(ParameterType.RadiusFourthLevel).Value, StemSketch4, _curPoint);
ExtrudeDefinition extrudeDef4 =
_inventorApi.PartDefinition.
Features.
ExtrudeFeatures.
CreateExtrudeDefinition(StemSketch4.Profiles.AddForSolid(), PartFeatureOperationEnum.kJoinOperation);
extrudeDef4.SetDistanceExtent(ValParameters.GetParameter(ParameterType.LengthFourthLevel).Value, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrude4 = _inventorApi.PartDefinition.Features.ExtrudeFeatures.Add(extrudeDef4);
}
private void Feature4(int x, int y)
{
try
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
oPartDoc.UnitsOfMeasure.LengthUnits = Inventor.UnitsTypeEnum.kMillimeterLengthUnits;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
//Inventor.Point2d point1 = _invApp.TransientGeometry.CreatePoint2d(6, 13.8);
//Inventor.Point2d point2 = _invApp.TransientGeometry.CreatePoint2d(-6, 13.8);
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[3]);
SketchArc arc1 = oSketch.SketchArcs.AddByThreePoints(_invApp.TransientGeometry.CreatePoint2d(5.879, 13.8), _invApp.TransientGeometry.CreatePoint2d(0, 15), _invApp.TransientGeometry.CreatePoint2d(-5.879, 13.8));
SketchArc arc2 = oSketch.SketchArcs.AddByThreePoints(arc1.StartSketchPoint, _invApp.TransientGeometry.CreatePoint2d(0, 9), arc1.EndSketchPoint);
//oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), 15);
//oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 15), 6);
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
//oProfile = oSketch.Profiles.AddForSurface(arc2);
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kCutOperation);
oExtrudeDef.SetDistanceExtent(3, Inventor.PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
catch
{
try
{
Feature3(x, y);
}
catch
{
Feature2(x, y);
}
}
}
private Inventor.ExtrudeFeature Extrude_FlangeBody(ref Inventor.PartDocument PartDocument)
{
Inventor.TransientGeometry TransientGeometry;
Inventor.SketchCircle SketchCircle;
Inventor.RadiusDimConstraint RadiusDimConstraint = null;
Inventor.Profile SketchProfile;
Inventor.ExtrudeDefinition ExtrudeDefinition;
Inventor.ExtrudeFeature ExtrudeFeature = null;
Inventor.PlanarSketch Sketch;
Inventor.SketchEntity SketchEntity;
PartDocument = AddSketchProjectCenterPoint(PartDocument, out Sketch, out SketchEntity);
TransientGeometry = InvApp.TransientGeometry;
SketchCircle = Sketch.SketchCircles.AddByCenterRadius(TransientGeometry.CreatePoint2d(0, 0), FlangeDiaOD / 2);
RadiusDimConstraint = Sketch.DimensionConstraints.AddRadius((Inventor.SketchEntity)SketchCircle, TransientGeometry.CreatePoint2d(0, 0), false);
Sketch.GeometricConstraints.AddCoincident(SketchEntity, (Inventor.SketchEntity)SketchCircle.CenterSketchPoint);
RadiusDimConstraint = null;
SketchCircle = null;
Inventor.ObjectCollection SketchObjectCollection;
SketchObjectCollection = InvApp.TransientObjects.CreateObjectCollection();
SketchCircle = Sketch.SketchCircles.AddByCenterRadius(TransientGeometry.CreatePoint2d(0, 0), FlangeDiaID / 2);
RadiusDimConstraint = Sketch.DimensionConstraints.AddRadius((Inventor.SketchEntity)SketchCircle, TransientGeometry.CreatePoint2d(0, 0), false);
Sketch.GeometricConstraints.AddCoincident(SketchEntity, (Inventor.SketchEntity)SketchCircle.CenterSketchPoint);
SketchObjectCollection.Add(SketchCircle);
SketchProfile = Sketch.Profiles.AddForSolid(true, SketchObjectCollection);
ExtrudeDefinition = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.CreateExtrudeDefinition(SketchProfile, Inventor.PartFeatureOperationEnum.kNewBodyOperation);
ExtrudeDefinition.SetDistanceExtent(FlangeThickness, Inventor.PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
//Extrude The Sketch Profile
ExtrudeFeature = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.Add(ExtrudeDefinition);
ExtrudeFeature.Name = "FlangeBody";
return(ExtrudeFeature);
}
public Inventor.ExtrudeFeature Extrude_FlangeBody()
{
Inventor.TransientGeometry TransientGeometry;
Inventor.SketchCircle SketchCircle;
Inventor.RadiusDimConstraint RadiusDiamension = null;
Inventor.Profile SketchProfile;
Inventor.ExtrudeDefinition ExtrudeDefinition;
Inventor.ExtrudeFeature ExtrudeFeature = null;
Inventor.PlanarSketch Sketch;
Inventor.SketchEntity SketchEntity;
//Create Sketch on wp project 0,0,0 work point Geometry
PartDocument = AddSketchProjectCenterPoint(PartDocument, out Sketch, out SketchEntity);
//Get the Transient Geometry Object from Inventor
TransientGeometry = InvApp.TransientGeometry;
//Draw Outside Hole
DrawCircle_Constrain_Diamension(TransientGeometry.CreatePoint2d(0, 0), out SketchCircle, out RadiusDiamension, Sketch, SketchEntity, FlangeDiaOD / 2);
RadiusDiamension = null; // reset for next use
SketchCircle = null;
Inventor.ObjectCollection SketchObjectCollection;
SketchObjectCollection = InvApp.TransientObjects.CreateObjectCollection();
//Draw Inside Hole Add to sketch objects
DrawCircle_Constrain_Diamension(TransientGeometry.CreatePoint2d(0, 0), out SketchCircle, out RadiusDiamension, Sketch, SketchEntity, FlangeDiaID / 2);
//Add to sketch Collection ready for Extrude
SketchObjectCollection.Add(SketchCircle);
//Convert to profileing
SketchProfile = Sketch.Profiles.AddForSolid(true, SketchObjectCollection);
ExtrudeDefinition = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.CreateExtrudeDefinition(SketchProfile, Inventor.PartFeatureOperationEnum.kNewBodyOperation);
ExtrudeDefinition.SetDistanceExtent(FlangeThickness, Inventor.PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
//Extrude The Sketch Profile
ExtrudeFeature = PartDocument.ComponentDefinition.Features.ExtrudeFeatures.Add(ExtrudeDefinition);
ExtrudeFeature.Name = "FlangeBody";
return(ExtrudeFeature);
}
void createPart1()
{
// create a new part
PartDocument oDoc = (PartDocument)mApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oDef = oDoc.ComponentDefinition;
TransientGeometry oTG = mApp.TransientGeometry;
// create sketch elements
PlanarSketch oSketch = oDef.Sketches.Add(oDef.WorkPlanes[3]);
SketchCircle oCircle = oSketch.SketchCircles.AddByCenterRadius(oTG.CreatePoint2d(0, 0), 1);
Profile oProfile = oSketch.Profiles.AddForSolid();
// create a cylinder feature
ExtrudeDefinition oExtrudDef = oDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudDef.SetDistanceExtent(5, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrudeF = oDef.Features.ExtrudeFeatures.Add(oExtrudDef);
//add an attribute to cylinder face
Face oFace = oExtrudeF.SideFaces[1];
AttributeSet oAttSet = default(AttributeSet);
Inventor.Attribute oAtt = null;
oAttSet = oFace.AttributeSets.Add("demoAttset");
oAtt = oAttSet.Add("demoAtt", ValueTypeEnum.kStringType, "namedEdge");
if (System.IO.File.Exists("c:\temp\test1.ipt"))
{
System.IO.File.Delete("c:\temp\test1.ipt");
}
oDoc.SaveAs("c:\\temp\\test1.ipt", false);
}
//creating shaft
internal static void Revolve()
{
Profile profile;
try
{
var_es.lines = new List <SketchLine>();
if (var_es.part_doc_def.Features.RevolveFeatures.Count != 0)
{
//partDef.Features.RevolveFeatures[1].Delete();
foreach (RevolveFeature s in var_es.part_doc_def.Features.RevolveFeatures)
{
s.Delete();
}
}
if (var_es.part_doc_def.Sketches.Count != 0)
{
foreach (Sketch s in var_es.part_doc_def.Sketches)
{
s.Delete();
}
}
partDef = var_es.part_doc.ComponentDefinition;
tg = var_es.InventorApp.TransientGeometry;
sketch = partDef.Sketches.Add(partDef.WorkPlanes[3]);
if (var_es.lines.Count > 0)
{
var_es.lines.RemoveAt(var_es.lines.Count - 1);
sketch.SketchLines[sketch.SketchLines.Count].Delete();
}
foreach (Section obj in var_es._list)
{
obj.DrawGeom(tg, ref sketch, ref var_es.lines);
}
var_es.lines.Add(sketch.SketchLines.AddByTwoPoints(var_es.lines[0].StartSketchPoint, var_es.lines[var_es.lines.Count - 1].EndSketchPoint));
var_es.lines[var_es.lines.Count - 1].Centerline = true;
profile = sketch.Profiles.AddForSolid();
RevolveFeature ex = partDef.Features.RevolveFeatures.AddFull(profile, var_es.lines[var_es.lines.Count - 1], PartFeatureOperationEnum.kNewBodyOperation);
//assinging all faces to each section
Assign_all_faces();
Assign_All_Faces();
}
catch { }
//Chamfers and Fillets creation
Chamfer_creation();
#region Polygon creation
try
{
//polyon creation by cutting out unneeded parts
foreach (Section obj in var_es._list)
{
if (obj.GetType().ToString() == "InvAddIn.Pol")
{
PlanarSketch sketch;
//getting sketch
try
{
sketch = partDef.Sketches.Add(obj.Start_face);
}
catch
{
sketch = partDef.Sketches.Add(obj.End_face);
}
sketch.Name = "Pol" + obj.Position;
//creatin points for sketchline, this line is polygon`s side, wich determines what should be cut off
Point2d first = tg.CreatePoint2d(), second = tg.CreatePoint2d();
var k = (360 / obj.Number_of_Edges) / 2;
first.X = Math.Cos(k * Math.PI / 180) * var_es._list[obj.Position].Radius;
first.Y = Math.Sin(k * Math.PI / 180) * var_es._list[obj.Position].Radius;
second.X = first.X;
second.Y = first.Y * -1;
sketch.SketchLines.AddByTwoPoints(first, second);
//Arc to connect start and end point of polygon`s side , and mid-point is point on the the outside circle
sketch.SketchArcs.AddByThreePoints(sketch.SketchLines[1].StartSketchPoint, tg.CreatePoint2d(var_es._list[obj.Position].Radius), sketch.SketchLines[1].EndSketchPoint);
profile = sketch.Profiles.AddForSolid();
//adding extrude definition
ExtrudeDefinition extrude = partDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile, PartFeatureOperationEnum.kCutOperation);
extrude.SetDistanceExtent(var_es._list[obj.Position].Length, PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
ExtrudeFeature extrudeFeature = partDef.Features.ExtrudeFeatures.Add(extrude);
//creating circle array of features to make polygon
ObjectCollection OBJ_colection = var_es.InventorApp.TransientObjects.CreateObjectCollection();
OBJ_colection.Add(partDef.Features.ExtrudeFeatures[partDef.Features.ExtrudeFeatures.Count] as Object);
partDef.Features.CircularPatternFeatures.Add(OBJ_colection, partDef.WorkAxes[1], false, obj.Number_of_Edges + " ul", 360 + " deg", true, PatternComputeTypeEnum.kIdenticalCompute);
}
}
}
catch (Exception e5)
{
MessageBox.Show(e5.ToString());
}
#endregion
//All features creating
try
{
Feature();
}
catch (Exception e113) { MessageBox.Show(e113.ToString()); }
}
public void RunWithArguments(Document doc, NameValueMap map)
{
//LogTrace("Processing " + doc.FullFileName);
//try
//{
// if (doc.DocumentType == DocumentTypeEnum.kPartDocumentObject)
// {
// using (new HeartBeat())
// {
// // TODO: handle the Inventor part here
// }
// }
// else if (doc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject) // Assembly.
// {
// using (new HeartBeat())
// {
// // TODO: handle the Inventor assembly here
// }
// }
//}
//catch (Exception e)
//{
// LogError("Processing failed. " + e.ToString());
//}
LogTrace("Initialiting");
PartDocument oPartDoc = (PartDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kPartDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject), true);
LogTrace("Part template opened");
TransientGeometry oTG = inventorApplication.TransientGeometry;
PartComponentDefinition oPartComDef = oPartDoc.ComponentDefinition;
UserParameters oParams = oPartComDef.Parameters.UserParameters;
oParams.AddByExpression("width", "50", UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("height", "10", UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("length", "10", UnitsTypeEnum.kMillimeterLengthUnits);
LogTrace("Standard parameters created");
Point2d[] oPoints = new Point2d[4];
oPoints[0] = oTG.CreatePoint2d(0, 0);
oPoints[1] = oTG.CreatePoint2d(0, oPartComDef.Parameters.GetValueFromExpression("width", UnitsTypeEnum.kMillimeterLengthUnits));
oPoints[2] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("height", UnitsTypeEnum.kMillimeterLengthUnits), 0);
oPoints[3] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("height", UnitsTypeEnum.kMillimeterLengthUnits), oPartComDef.Parameters.GetValueFromExpression("width", UnitsTypeEnum.kMillimeterLengthUnits));
LogTrace("Inventor points created");
LogTrace("Initiating sketch creation...");
PlanarSketch oSketch = oPartComDef.Sketches.Add(oPartComDef.WorkPlanes[1]);
SketchPoint[] osPoints = new SketchPoint[4];
SketchLine[] oLines = new SketchLine[4];
osPoints[0] = oSketch.SketchPoints.Add(oPoints[0]);
osPoints[1] = oSketch.SketchPoints.Add(oPoints[1]);
osPoints[2] = oSketch.SketchPoints.Add(oPoints[2]);
osPoints[3] = oSketch.SketchPoints.Add(oPoints[3]);
oLines[0] = oSketch.SketchLines.AddByTwoPoints(osPoints[0], osPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, osPoints[3]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, osPoints[2]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oLines[0].StartSketchPoint);
LogTrace("Sketch created, adding dimensions");
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[0], osPoints[1], DimensionOrientationEnum.kAlignedDim, oPoints[1]); //d0//
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[1], osPoints[3], DimensionOrientationEnum.kAlignedDim, oPoints[3]); //d1//
LogTrace("Dimensions added to the sketch, changing standard values for User parameter values");
var inventorMParams = oPartComDef.Parameters.ModelParameters;
foreach (ModelParameter mParam in inventorMParams)
{
if (mParam.Name.Contains("d0"))
{
mParam.Expression = "width";
}
else if (mParam.Name.Contains("d1"))
{
mParam.Expression = "height";
}
}
LogTrace("Dimensions with user parameter values created, starting extrude operation");
//oSketch.DimensionConstraints.AddTwoPointDistance(oPoints[0], oPoints[1], DimensionOrientationEnum.kAlignedDim, "width", true);
Profile oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = oPartComDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(oPartComDef.Parameters.UserParameters.AddByExpression("length", "length", UnitsTypeEnum.kMillimeterLengthUnits), PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = oPartComDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
//oExtrude.FeatureDimensions[1].Parameter.Name = "length";
LogTrace("Extrude operation finished");
XmlDocument xmlDoc = new XmlDocument();
string currentDir = System.IO.Directory.GetCurrentDirectory();
string projectDir = Directory.GetParent(currentDir).Parent.FullName;
LogTrace("Reading XML input file from " + projectDir);
xmlDoc.Load(System.IO.Path.Combine(projectDir, "React-BIM-output.xml"));
//xmlDoc.Load("C:\\webapps\\IpartCreator\\React-BIM-output.xml");
XmlNodeList memberNodeList = xmlDoc.GetElementsByTagName("Member");
XmlNodeList partNumberNodeList = xmlDoc.GetElementsByTagName("PartNumber");
XmlNodeList widthNodeList = xmlDoc.GetElementsByTagName("width");
XmlNodeList heightNodeList = xmlDoc.GetElementsByTagName("height");
XmlNodeList lengthNodeList = xmlDoc.GetElementsByTagName("length");
LogTrace("XML tag values imported");
LogTrace("Creating iPart");
iPartFactory oFactory = oPartComDef.CreateFactory();
Worksheet oWS = oFactory.ExcelWorkSheet;
Workbook oWB = (Workbook)oWS.Parent;
LogTrace("Generating Excel file for iPart");
oWS.Cells[1, 1] = "Member<defaultRow>1</defaultRow><filename></filename>";
oWS.Cells[1, 2] = "Part Number [Project]";
oWS.Cells[1, 3] = "width";
oWS.Cells[1, 4] = "height";
oWS.Cells[1, 5] = "length";
for (int i = 0; i < memberNodeList.Count; i++)
{
oWS.Cells[(i + 2), 1] = memberNodeList[i].InnerText;
oWS.Cells[(i + 2), 2] = partNumberNodeList[i].InnerText;
oWS.Cells[(i + 2), 3] = widthNodeList[i].InnerText;
oWS.Cells[(i + 2), 4] = heightNodeList[i].InnerText;
oWS.Cells[(i + 2), 5] = lengthNodeList[i].InnerText;
}
oWB.Save();
oWB.Close();
LogTrace("Excel created");
oPartDoc.Update();
string iPartPath = projectDir + "/results/bimipart.ipt";
int iNumRows = oFactory.TableRows.Count;
LogTrace("Saving iPart to " + iPartPath);
oPartDoc.SaveAs(iPartPath, false);
LogTrace("Opening new assembly template");
AssemblyDocument oAssyDoc = (AssemblyDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kAssemblyDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kAssemblyDocumentObject), true);
AssemblyComponentDefinition oAssyComDef = oAssyDoc.ComponentDefinition;
ComponentOccurrences oAssyCompOccs = oAssyComDef.Occurrences;
LogTrace("Creating Matrix");
Matrix oPos = oTG.CreateMatrix();
int oStep = 0;
int iRow;
LogTrace("Placing iPart members to assembly");
for (iRow = 1; iRow <= iNumRows; iRow++)
{
oStep = oStep + 150;
oPos.SetTranslation(oTG.CreateVector(oStep, oStep, 0), false);
ComponentOccurrence oOcc = oAssyCompOccs.AddiPartMember(iPartPath, oPos, iRow);
}
string assyPath = projectDir + "/results/bimassy.iam";
LogTrace("Saving Assembly file to " + assyPath);
oAssyDoc.SaveAs(assyPath, false);
}
private void CircleSketch(int x, int y)
{
try
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches[1];
oSketch.SketchCircles[1].Radius = x;
oSketch.SketchCircles[2].Radius = x - 2;
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures[1];
oExtrude.Definition.Profile = oProfile;
oExtrude.Definition.SetDistanceExtent(y, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
/*ExtrudeFeature oExtrude = default(ExtrudeFeature);
* oExtrude = oCompDef.Features.ExtrudeFeatures[1];
* oExtrude.*/
Random r = new Random();
int rand = r.Next(1, 20);
if (rand > 17)
{
int ner = r.Next(1, 3);
movrot.ChangeView(ner, 0, 0, apply: false);
}
if (x > 450 && y > 300)
{
oCompDef = oPartDoc.ComponentDefinition;
foreach (Inventor.PartFeature oFeat in oCompDef.Features)
{
oFeat.Delete();
}
foreach (Inventor.Sketch oSket in oCompDef.Sketches)
{
oSket.Delete();
}
}
if (rand == 15)
{
oCompDef = oPartDoc.ComponentDefinition;
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[1]);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), x);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), x - 2);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(y, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
}
catch
{
PartDocument oPartDoc = (PartDocument)_invApp.ActiveDocument;
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[1]);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), x);
oSketch.SketchCircles.AddByCenterRadius(_invApp.TransientGeometry.CreatePoint2d(0, 0), x - 2);
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, Inventor.PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(y, Inventor.PartFeatureExtentDirectionEnum.kSymmetricExtentDirection);
ExtrudeFeature oExtrude = default(ExtrudeFeature);
oExtrude = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
}
}
private void Button1_Click(object sender, EventArgs e)
{
PartDocument oDoc = mApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject,
mApp.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject,
SystemOfMeasureEnum.kDefaultSystemOfMeasure,
DraftingStandardEnum.kDefault_DraftingStandard, null),
true) as PartDocument;
// Get the XZ Plane
WorkPlane oWorkPlane = oDoc.ComponentDefinition.WorkPlanes[2];
PlanarSketch oSketch = oDoc.ComponentDefinition.Sketches.Add(oWorkPlane, false);
TransientGeometry oTG = mApp.TransientGeometry;
//Create some transient points used for defining the lines (see BRep Module)
Point2d[] oPoints = new Point2d[5];
oPoints[0] = oTG.CreatePoint2d(0, 0);
oPoints[1] = oTG.CreatePoint2d(-10, 0);
oPoints[2] = oTG.CreatePoint2d(-10, -10);
oPoints[3] = oTG.CreatePoint2d(5, -10);
oPoints[4] = oTG.CreatePoint2d(5, -5);
//Add the sketchlines, coincident constraints will be created automatically
//since the "Line.EndSketchPoint" are provided each time we create a new line
SketchLine[] oLines = new SketchLine[5];
oLines[0] = oSketch.SketchLines.AddByTwoPoints(oPoints[0], oPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, oPoints[2]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, oPoints[3]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oPoints[4]);
oSketch.SketchArcs.AddByCenterStartEndPoint(oTG.CreatePoint2d(0, -5), oLines[3].EndSketchPoint, oLines[0].StartSketchPoint, true);
//Create a profile for the extrusion, here no need to worry since there is only
//a single profile that is possible
Profile oProfile = oSketch.Profiles.AddForSolid(true, null, null);
//this is the old way, i.e. create the extrude feature directly. it is still supported for backward compatibility
//ExtrudeFeature oExtrude = oDoc.ComponentDefinition.Features.ExtrudeFeatures.AddByDistanceExtent(oProfile,
// 5.0, PartFeatureExtentDirectionEnum.kPositiveExtentDirection, PartFeatureOperationEnum.kNewBodyOperation, 0.0);
// Definition Way:
PartComponentDefinition oPartDocDef = oDoc.ComponentDefinition;
// get ExtrudeFeatures collection
ExtrudeFeatures extrudes = oPartDocDef.Features.ExtrudeFeatures;
// Create an extrude definition in the new surface body
ExtrudeDefinition extrudeDef = extrudes.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kNewBodyOperation);
// Modify the extent and taper angles.
extrudeDef.SetDistanceExtent(8, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
extrudeDef.SetDistanceExtentTwo(20);
extrudeDef.TaperAngle = "-2 deg";
extrudeDef.TaperAngleTwo = "-10 deg";
// Create the extrusion.
ExtrudeFeature extrude = extrudes.Add(extrudeDef);
//Fit the view programmatically
Camera oCamera = mApp.ActiveView.Camera;
oCamera.ViewOrientationType = ViewOrientationTypeEnum.kIsoTopRightViewOrientation;
oCamera.Apply();
mApp.ActiveView.Fit(true);
}
/// <summary>
/// Построение зубьев вала.
/// </summary>
private void BuildTeeth()
{
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 1)
{
_numTeethLevelL = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value - ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusFirstLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusFirstLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusFirstLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 2)
{
_numTeethLevelL = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusSecondLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusSecondLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusSecondLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 3)
{
_numTeethLevelL = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value +
ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 4)
{
_numTeethLevelL =
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value + ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value +
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusFourthLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusFourthLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusFourthLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthFourthLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 5)
{
_numTeethLevelL =
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value + ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value +
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value + ValParameters.GetParameter(ParameterType.LengthFourthLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusFifthLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusFifthLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusFifthLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthFifthLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 6)
{
_numTeethLevelL =
ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value + ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value +
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value + ValParameters.GetParameter(ParameterType.LengthFourthLevel).Value +
ValParameters.GetParameter(ParameterType.LengthFifthLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusSixthLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusSixthLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusSixthLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthSixthLevel).Value;
}
//
if (ValParameters.GetParameter(ParameterType.NumTeethLevelSetted).Value == 7)
{
_numTeethLevelL = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value +
ValParameters.GetParameter(ParameterType.LengthSecondLevel).Value +
ValParameters.GetParameter(ParameterType.LengthThirdLevel).Value +
ValParameters.GetParameter(ParameterType.LengthFourthLevel).Value +
ValParameters.GetParameter(ParameterType.LengthFifthLevel).Value +
ValParameters.GetParameter(ParameterType.LengthSixthLevel).Value;
_numTeethLevelR = ValParameters.GetParameter(ParameterType.RadiusSeventhLevel).Value +
ValParameters.GetParameter(ParameterType.RadiusSeventhLevel).Value / 10;
_numTeethLevelQ = ValParameters.GetParameter(ParameterType.RadiusSeventhLevel).Value;
_distance = ValParameters.GetParameter(ParameterType.LengthSeventhLevel).Value;
}
PlanarSketch StemSketchQ = _inventorApi.MakeNewSketch(3, _numTeethLevelL);// второй параметр отодвигает по Z координате на заданную длину.
Point2d pointQ = _inventorApi.TransientGeometry.CreatePoint2d(_numTeethLevelR, 0);
Point2d CenterPointQ = _inventorApi.TransientGeometry.CreatePoint2d(_numTeethLevelQ, 0);
_inventorApi.DrawPolygon(pointQ, StemSketchQ, CenterPointQ);
//DrawPolygon(pointQ, StemSketchQ, CenterPointQ);
ExtrudeDefinition extrudeDefQ =
_inventorApi.PartDefinition.
Features.
ExtrudeFeatures.
CreateExtrudeDefinition(StemSketchQ.Profiles.AddForSolid(), PartFeatureOperationEnum.kCutOperation);
extrudeDefQ.SetDistanceExtent(
_distance, // insteadof _distance = ValParameters.GetParameter(ParameterType.LengthFirstLevel).Value;
PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature extrudeQ = _inventorApi.PartDefinition.Features.ExtrudeFeatures.Add(extrudeDefQ);
//Базовые оси
//для создания массива.
WorkAxis XAxis = _inventorApi.PartDefinition.WorkAxes[1];
WorkAxis YAxis = _inventorApi.PartDefinition.WorkAxes[2];
WorkAxis ZAxis = _inventorApi.PartDefinition.WorkAxes[3];
//Create an object collection
ObjectCollection objectCollection = _inventorApi.CreateObjectCollection();
objectCollection.Add(extrudeQ);
_inventorApi.PartDefinition.Features.CircularPatternFeatures.Add(
objectCollection,
ZAxis,
true,
// (int)(ValParameters.GetParameter(ParameterType.RadiusThirdLevel).Value/1.5),
(int)(ValParameters.GetParameter(ParameterType.NumTeeth).Value),
"360 deg",
true,
PatternComputeTypeEnum.kAdjustToModelCompute);
}
/// <summary>
/// 'create more feature based on the start face of the first extrude feature
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button4_Click(object sender, EventArgs e)
{
// create a new document with an extrude feature.
createFeature();
PartDocument oPartDoc = mApp.ActiveDocument as PartDocument;
// get a start face of the extrude feature
ExtrudeFeature oExtrudeF = oPartDoc.ComponentDefinition.Features.ExtrudeFeatures[1];
Face oFirstFace = oExtrudeF.StartFaces[1];
// add a new sketch on the basis of the start face
PlanarSketch oSketch = oPartDoc.ComponentDefinition.Sketches.Add(oFirstFace, false);
TransientGeometry oTG = mApp.TransientGeometry;
// create a circle and make a profile from the sketch
oSketch.SketchCircles.AddByCenterRadius(oTG.CreatePoint2d(0, -5), 1);
Profile oProfile = oSketch.Profiles.AddForSolid(true, null, null);
// get ExtrudeFeatures collection
ExtrudeFeatures extrudes = oPartDoc.ComponentDefinition.Features.ExtrudeFeatures;
// Create an extrude definition in the new surface body
ExtrudeDefinition extrudeDef = extrudes.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
// Modify the extent
extrudeDef.SetDistanceExtent(2, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
// Create the extrusion.
ExtrudeFeature extrude = extrudes.Add(extrudeDef);
//
FilletFeatures oFilletFs = oPartDoc.ComponentDefinition.Features.FilletFeatures;
//create fillet definition
FilletDefinition oFilletDef = oFilletFs.CreateFilletDefinition();
// FaceCollection
FaceCollection oFacesCollOne = mApp.TransientObjects.CreateFaceCollection();
oFacesCollOne.Add(oFirstFace);
FaceCollection oFacesCollTwo = mApp.TransientObjects.CreateFaceCollection();
oFacesCollTwo.Add(extrude.SideFaces[1]);//cylinder face
oFilletDef.AddFaceSet(oFacesCollOne, oFacesCollTwo, 0.1);
oFilletFs.Add(oFilletDef);
//Fit the view programmatically
Camera oCamera = mApp.ActiveView.Camera;
oCamera.ViewOrientationType = ViewOrientationTypeEnum.kIsoTopRightViewOrientation;
oCamera.Apply();
mApp.ActiveView.Fit(true);
}
public void RunWithArguments(Document doc, NameValueMap map)
{
LogTrace("Initialiting");
PartDocument oPartDoc = (PartDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kPartDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject), true);
LogTrace("Part template opened");
TransientGeometry oTG = inventorApplication.TransientGeometry;
PartComponentDefinition oPartComDef = oPartDoc.ComponentDefinition;
UserParameters oParams = oPartComDef.Parameters.UserParameters;
XmlDocument xmlDoc = new XmlDocument();
string currentDir = System.IO.Directory.GetCurrentDirectory();
string projectDir = Directory.GetParent(currentDir).Parent.FullName;
LogTrace("Reading XML input file from " + projectDir);
xmlDoc.Load(System.IO.Path.Combine(projectDir, "react-test-output.xml"));
//xmlDoc.Load("react-test-output.xml");
//xmlDoc.Load("C:\\webapps\\IpartCreator\\React-BIM-output.xml");
XmlNodeList FloorList = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor");
XmlNodeList FloorPointList = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point");
XmlNodeList ComponentName = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/ComponentName");
XmlNodeList PointX = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/X");
XmlNodeList PointY = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/Y");
XmlNodeList PointZ = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/Z");
for (int i = 0; i < FloorList.Count; i++)
{
//oParams.AddByExpression("ComponentName" + i, ComponentName[i].InnerText, UnitsTypeEnum.kUnitlessUnits);
int numPoint = FloorPointList.Count / FloorList.Count;
Point2d[] oPoints = new Point2d[numPoint];
SketchPoint[] osPoints = new SketchPoint[numPoint];
for (int j = 0; j < numPoint; j++)
{
oParams.AddByExpression("PointX" + j, PointX[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("PointY" + j, PointY[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("PointZ" + j, PointZ[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oPoints[j] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("PointX" + j, UnitsTypeEnum.kMillimeterLengthUnits), oPartComDef.Parameters.GetValueFromExpression("PointY" + j, UnitsTypeEnum.kMillimeterLengthUnits));
}
SketchLine[] oLines = new SketchLine[numPoint];
PlanarSketch oSketch = oPartComDef.Sketches.Add(oPartComDef.WorkPlanes[2]);
osPoints[0] = oSketch.SketchPoints.Add(oPoints[0]);
osPoints[1] = oSketch.SketchPoints.Add(oPoints[1]);
osPoints[2] = oSketch.SketchPoints.Add(oPoints[2]);
osPoints[3] = oSketch.SketchPoints.Add(oPoints[3]);
oLines[0] = oSketch.SketchLines.AddByTwoPoints(osPoints[0], osPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, osPoints[2]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, osPoints[3]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oLines[0].StartSketchPoint);
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[0], osPoints[1], DimensionOrientationEnum.kAlignedDim, oPoints[1]); //d0//
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[1], osPoints[2], DimensionOrientationEnum.kAlignedDim, oPoints[3]); //d1//
Profile oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = oPartComDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(oPartComDef.Parameters.UserParameters.AddByExpression("length", "8", UnitsTypeEnum.kMillimeterLengthUnits), PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = oPartComDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
string PartPath = projectDir + "/results/" + ComponentName[i].InnerText + i + ".ipt";
//string PartPath = ComponentName[i].InnerText + i + ".ipt";
oPartDoc.SaveAs(PartPath, false);
oExtrude.Delete();
}
oPartDoc.Close(false);
AssemblyDocument oAssyDoc = (AssemblyDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kAssemblyDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kAssemblyDocumentObject), true);
AssemblyComponentDefinition oAssyComDef = oAssyDoc.ComponentDefinition;
ComponentOccurrences oAssyCompOccs = oAssyComDef.Occurrences;
Matrix oPos = oTG.CreateMatrix();
int oStep = 0;
int icomp;
int numite = FloorPointList.Count / FloorList.Count;
for (icomp = 0; icomp <= numite; icomp++)
{
oStep = oStep + 150;
oPos.SetTranslation(oTG.CreateVector(oStep, oStep, 0), false);
string PartPath = projectDir + "/results/" + ComponentName[icomp].InnerText + icomp + ".ipt";
//string PartPath = ComponentName[icomp].InnerText + icomp + ".ipt";
ComponentOccurrence oOcc = oAssyCompOccs.Add(PartPath, oPos);
}
oAssyDoc.SaveAs(projectDir + "/results/result.iam", false);
//oAssyDoc.SaveAs("result.iam", false);
oAssyDoc.Close();
ZipFile.CreateFromDirectory(projectDir + "/results", projectDir + "/forgeResult.zip");
}
private void Button_ok_Click(object sender, EventArgs e)
{
// references to some useful objects
TransientGeometry geom = m_inventorApplication.TransientGeometry;
//PartDocument document = m_inventorApplication.ActiveDocument as PartDocument;
//_Document document = m_inventorApplication.ActiveDocument;
/*
* if (document == null)
* {
* AssemblyDocument asm = m_inventorApplication.ActiveDocument as AssemblyDocument;
* m_inventorApplication.ActiveDocument;
* }
*/
PartComponentDefinition def; // = document.ComponentDefinition;
UnitsOfMeasure units; // = document.UnitsOfMeasure;
UserParameters user_params;
Document document = m_inventorApplication.ActiveDocument;
if (m_inventorApplication.ActiveDocument is AssemblyDocument)
{
AssemblyDocument doc = m_inventorApplication.ActiveDocument as AssemblyDocument;
PartDocument part = doc.ActivatedObject as PartDocument;
if (part == null)
{
m_inventorApplication.ErrorManager.Show("Please activate a part!", true, false);
return;
}
def = part.ComponentDefinition;
units = part.UnitsOfMeasure;
user_params = part.ComponentDefinition.Parameters.UserParameters;
}
else if (m_inventorApplication.ActiveDocument is PartDocument)
{
PartDocument doc = m_inventorApplication.ActiveDocument as PartDocument;
def = doc.ComponentDefinition;
units = doc.UnitsOfMeasure;
user_params = doc.ComponentDefinition.Parameters.UserParameters;
}
else
{
m_inventorApplication.ErrorManager.Show("Current document is neither an Assembly nor a Part.", true, false);
return;
}
// get and check selected faces
ObjectsEnumerator JustSelectedEntities = m_selects.SelectedEntities;
if (JustSelectedEntities.Count == 0)
{
m_inventorApplication.ErrorManager.Show("Select at least one planar, rectangular face.", true, false);
return;
}
foreach (Object _f in JustSelectedEntities)
{
Face f = _f as Face;
if (f == null)
{
m_inventorApplication.ErrorManager.Show("Somehow, you managed to select something that isn't a face. This should not happen, please report it.", true, false);
return;
}
if (f.Edges.Count != 4)
{
m_inventorApplication.ErrorManager.Show("Please only select rectangular faces.", true, false);
return;
}
}
// TODO: catch exception when invalid was is entered
UserParameter tab_user_constr;
if (m_dialog.mode_count.Checked)
{
tab_user_constr = user_params.AddByExpression("tab_count", m_dialog.tab_size_input.Text, UnitsTypeEnum.kUnitlessUnits);
}
else
{
tab_user_constr = user_params.AddByExpression("tab_size", m_dialog.tab_size_input.Text, UnitsTypeEnum.kDefaultDisplayLengthUnits);
}
int total_operations = JustSelectedEntities.Count;
WorkAxis[] extrusion_dir = new WorkAxis[total_operations];
bool[] long_edge_dir = new bool[total_operations];
PlanarSketch[] all_sketches = new PlanarSketch[total_operations];
Profile[] profile = new Profile[total_operations];
ExtrudeFeature[] extrusion = new ExtrudeFeature[total_operations];
TwoPointDistanceDimConstraint[] tab_length_constr = new TwoPointDistanceDimConstraint[total_operations];
TwoPointDistanceDimConstraint[] tab_widthdepth_constr = new TwoPointDistanceDimConstraint[total_operations];
TwoPointDistanceDimConstraint[] total_length_constr = new TwoPointDistanceDimConstraint[total_operations];
RectangularPatternFeature[] rect_pattern = new RectangularPatternFeature[total_operations];
Transaction transaction = m_inventorApplication.TransactionManager.StartTransaction(m_inventorApplication.ActiveDocument, "LaserTab");
// create extrusion feature for each face
int i = 0;
foreach (Object _f in JustSelectedEntities)
{
Face f = _f as Face;
if (_f is FaceProxy)
{
f = ((FaceProxy)_f).NativeObject;
}
// TODO: make sure active document is a partDocument and ActiveEditObject is not a sketch (should be also a partDocument?)
// TODO: wrap it all into a ClientFeature
// TODO: maybe also wrap it in a Transaction?
// create sketch
PlanarSketch sketch = def.Sketches.Add(f, false); // don't project anything
//PlanarSketch sketch = def.Sketches.Add(f, true); // project existing geometry
//PlanarSketch sketch = def.Sketches.AddWithOrientation(f, long_edge, true, true, long_edge.StartVertex, true);
Edge short_edge, long_edge;
Vertex vert_origin, vert_short_end, vert_long_end;
determine_orientation(f, out long_edge, out short_edge, out vert_origin, out vert_long_end, out vert_short_end);
// remember wheter 'long_edge' starts or stops at 'P_orig' (which is important for the direction of the rectangular pattern)
long_edge_dir[i] = long_edge.StartVertex == vert_origin;
extrusion_dir[i] = def.WorkAxes.AddByLine(long_edge, true);
// project important points
SketchPoint P_orig = sketch.AddByProjectingEntity(vert_origin) as SketchPoint;
SketchPoint P_long = sketch.AddByProjectingEntity(vert_long_end) as SketchPoint;
SketchPoint P_short = sketch.AddByProjectingEntity(vert_short_end) as SketchPoint; // fails! :(
// driven constraint of short dimension (determining thickness and depth of tab)
tab_widthdepth_constr[i] = sketch.DimensionConstraints.AddTwoPointDistance(
P_orig, P_short, DimensionOrientationEnum.kAlignedDim,
P_short.Geometry, true);
// driven constraint of long dimenstion (determining number/size of tabs)
total_length_constr[i] = sketch.DimensionConstraints.AddTwoPointDistance(
P_orig, P_long, DimensionOrientationEnum.kAlignedDim,
P_long.Geometry, true);
// appearantly, Profiles.AddForSolid() doesn't like lines that are made entirely out of projected points... (maybe because the line already exists?)
SketchPoint P_orig_proj = P_orig, P_short_proj = P_short;
P_short = sketch.SketchPoints.Add(P_short_proj.Geometry, false);
P_orig = sketch.SketchPoints.Add(P_orig_proj.Geometry, false);
// create dimension constraints
// TODO: calculate better position for text label
//Debug.Print("constraint short: {0} = {1}", constr_short.Parameter.Expression, constr_short.Parameter.Value);
//Debug.Print("constraint long: {0} = {1}", constr_long.Parameter.Expression, constr_long.Parameter.Value);
// create endpoint for rectangle
Point2d P_end2 = P_short.Geometry.Copy();
Point2d P_end1 = P_orig.Geometry.Copy();
Vector2d long_direction = P_orig.Geometry.VectorTo(P_long.Geometry);
long_direction.ScaleBy(0.2);
P_end1.TranslateBy(long_direction);
P_end2.TranslateBy(long_direction);
SketchPoint P_end1_sk = sketch.SketchPoints.Add(P_end1, false);
SketchPoint P_end2_sk = sketch.SketchPoints.Add(P_end2, false);
// constrain endpoints properly
//sketch.GeometricConstraints.AddCoincident((SketchEntity)long_line2, (SketchEntity)P_end2_sk);
//sketch.GeometricConstraints.AddCoincident((SketchEntity)long_line, (SketchEntity)P_end1_sk);
// constraint for tab length (twice, once for each side of the rectangle)
TwoPointDistanceDimConstraint tab_len_constraint1 = sketch.DimensionConstraints.AddTwoPointDistance(P_orig, P_end1_sk, DimensionOrientationEnum.kAlignedDim, P_end1);
TwoPointDistanceDimConstraint tab_len_constraint2 = sketch.DimensionConstraints.AddTwoPointDistance(P_short, P_end2_sk, DimensionOrientationEnum.kAlignedDim, P_end2);
tab_length_constr[i] = tab_len_constraint1;
// {0}: total length
// {1}: user input (count or length of single tab)
string expr;
if (m_dialog.mode_count.Checked)
{
if (m_dialog.force_parity.Checked)
{
if (m_dialog.parity_even.Checked)
{
expr = "{0} / ( round({1}/2)*2 )";
}
else
{
expr = "{0} / ( round( ({1}+1)/2 )*2 - 1 )";
}
}
else
{
expr = "{0} / {1}";
}
}
else
{
// TODO: take dropdown of >/</~ into account
if (m_dialog.force_parity.Checked)
{
if (m_dialog.parity_even.Checked)
{
expr = "{0} / ( round( {0}/{1}/2 )*2 )";
}
else
{
expr = "{0} / ( round( ({0}/{1}+1)/2 )*2 - 1)";
}
}
else
{
expr = "{0} / round({0}/{1})";
}
}
tab_len_constraint1.Parameter.Expression = string.Format(expr, total_length_constr[i].Parameter.Name, tab_user_constr.Name);
tab_len_constraint2.Parameter.Expression = tab_len_constraint1.Parameter.Name;
// create a rectangle based on these points
// two-point rectangle is always axis-aligned -> doesn't work for rotated stuff
//SketchEntitiesEnumerator rect = sketch.SketchLines.AddAsTwoPointRectangle(P_orig, P_end_sk);
// this is cumbersome, as the third point is transient and therefore the rectangle would have to be constrained afterwards
//SketchEntitiesEnumerator rect = sketch.SketchLines.AddAsThreePointRectangle(P_orig, P_short, P_end);
ObjectCollection rect = m_inventorApplication.TransientObjects.CreateObjectCollection();
rect.Add(sketch.SketchLines.AddByTwoPoints(P_orig, P_end1_sk));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_end1_sk, P_end2_sk));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_end2_sk, P_short));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_short, P_orig));
// constrain rectangle
if (m_dialog.offset.Checked)
{
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[1], (SketchEntity)P_orig_proj);
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[3], (SketchEntity)P_short_proj);
sketch.GeometricConstraints.AddPerpendicular((SketchEntity)rect[1], (SketchEntity)rect[2]);
TwoPointDistanceDimConstraint offset_dist = sketch.DimensionConstraints.AddTwoPointDistance(P_orig, P_orig_proj, DimensionOrientationEnum.kAlignedDim, P_orig_proj.Geometry);
offset_dist.Parameter.Expression = tab_len_constraint1.Parameter.Name;
}
else
{
sketch.GeometricConstraints.AddCoincident((SketchEntity)P_short, (SketchEntity)P_short_proj);
sketch.GeometricConstraints.AddCoincident((SketchEntity)P_orig, (SketchEntity)P_orig_proj);
}
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[1], (SketchEntity)P_long);
sketch.GeometricConstraints.AddParallel((SketchEntity)rect[1], (SketchEntity)rect[3]);
profile[i] = sketch.Profiles.AddForSolid(false, rect);
all_sketches[i] = sketch;
i++;
}
// do extrusions
for (i = 0; i < total_operations; i++)
{
string dist_expr;
if (m_dialog.auto_depth.Checked)
{
// use thickness of material
dist_expr = tab_widthdepth_constr[i].Parameter.Name;
}
else
{
// use user input
// TODO: validate!
dist_expr = m_dialog.tab_depth_input.Text;
}
PartFeatureExtentDirectionEnum dir;
PartFeatureOperationEnum op;
if (m_dialog.extrude_positive.Checked)
{
dir = PartFeatureExtentDirectionEnum.kPositiveExtentDirection;
op = PartFeatureOperationEnum.kJoinOperation;
}
else
{
dir = PartFeatureExtentDirectionEnum.kNegativeExtentDirection;
op = PartFeatureOperationEnum.kCutOperation;
}
// extrude said rectangle
ExtrudeDefinition extrusion_def = def.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile[i], op);
extrusion_def.SetDistanceExtent(dist_expr, dir);
extrusion[i] = def.Features.ExtrudeFeatures.Add(extrusion_def);
}
// do rectangular patterns
for (i = 0; i < total_operations; i++)
{
// now repeat that extrusion
ObjectCollection col = m_inventorApplication.TransientObjects.CreateObjectCollection();
col.Add(extrusion[i]);
// TODO: is ceil() actually correct here?
string offset = (m_dialog.offset.Checked ? "1" : "0");
string count_expr = string.Format("ceil(round({0} / {1} - {2}) / 2)", total_length_constr[i].Parameter.Name, tab_length_constr[i].Parameter.Name, offset);
RectangularPatternFeatureDefinition pattern_def =
def.Features.RectangularPatternFeatures.CreateDefinition(
col, extrusion_dir[i], long_edge_dir[i], count_expr, tab_length_constr[i].Parameter.Name + "*2");
// TODO: we could use PatternSpacingType kFitToPathLength here...
try
{
rect_pattern[i] =
def.Features.RectangularPatternFeatures.AddByDefinition(pattern_def);
}
catch (Exception ex)
{
Debug.Print("rect pattern failed: {0}", ex.Message);
Debug.Print("long edge: {0}, dir: {1}, count_expr = '{2}', len = '{3}'", extrusion_dir[i], long_edge_dir[i], count_expr, tab_length_constr[i].Parameter.Name + "*2");
transaction.End();
return;
}
}
stop_selection();
// create custom feature (called a ClientFeature by Inventor) containing all our sketches, extrusions and patterns in a single node
object start_element;
if (total_operations == 1)
{
// if there is only a single operation, the tree looks like this:
/*
* - extrusion 1 (consumed sketch 1)
* - pattern 1
*/
start_element = extrusion[0];
}
else
{
// if there are multiple operations, the sketch is not consumed by the extrusion
// and the tree looks like this:
/*
* - sketch 1
* - sketch 2
* - extrusion 1
* - extrusion 2
* - pattern 1
* - pattern 2
*/
start_element = all_sketches[0];
}
ClientFeatureDefinition feature_def = def.Features.ClientFeatures.CreateDefinition("LaserTab", start_element, rect_pattern[total_operations - 1]);
ClientFeature feature = def.Features.ClientFeatures.Add(feature_def, "{0defbf22-e302-4266-9bc9-fb80d5c8eb7e}");
// load the icon for our custom feature if not done so already
if (m_browser_icon == null)
{
stdole.IPictureDisp icon = PictureConverter.ImageToPictureDisp(Properties.Resources.browser_icon_16);
m_browser_icon = document.BrowserPanes.ClientNodeResources.Add("{0defbf22-e302-4266-9bc9-fb80d5c8eb7e}", -1, icon);
}
NativeBrowserNodeDefinition ndef = document.BrowserPanes[1].GetBrowserNodeFromObject(feature).BrowserNodeDefinition as NativeBrowserNodeDefinition;
ndef.OverrideIcon = m_browser_icon;
transaction.End();
}
/// <summary>
/// Add iMate definitions using AddMateiMateDefinition and AddInsertiMateDefinition.
/// </summary>
/// <remarks></remarks>
public void CreateiMateDefinition()
{
// Create a new part document, using the default part template.
PartDocument oPartDoc = (PartDocument)_InvApplication.Documents.Add(DocumentTypeEnum.kPartDocumentObject, _InvApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject));
// Set a reference to the component definition.
PartComponentDefinition oCompDef = default(PartComponentDefinition);
oCompDef = oPartDoc.ComponentDefinition;
// Create a new sketch on the X-Y work plane.
PlanarSketch oSketch = default(PlanarSketch);
oSketch = oCompDef.Sketches.Add(oCompDef.WorkPlanes[3]);
// Set a reference to the transient geometry object.
TransientGeometry oTransGeom = default(TransientGeometry);
oTransGeom = _InvApplication.TransientGeometry;
// Draw a 4cm x 3cm rectangle with the corner at (0,0)
SketchEntitiesEnumerator oRectangleLines = default(SketchEntitiesEnumerator);
oRectangleLines = oSketch.SketchLines.AddAsTwoPointRectangle(oTransGeom.CreatePoint2d(0, 0), oTransGeom.CreatePoint2d(4, 3));
// Create a profile.
Profile oProfile = default(Profile);
oProfile = oSketch.Profiles.AddForSolid();
// Create a base extrusion 1cm thick.
ExtrudeDefinition oExtrudeDef = default(ExtrudeDefinition);
oExtrudeDef = oCompDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kNewBodyOperation);
oExtrudeDef.SetDistanceExtent(1, PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
ExtrudeFeature oExtrude1 = default(ExtrudeFeature);
oExtrude1 = oCompDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
// Get the top face of the extrusion to use for creating the new sketch.
Face oFrontFace = default(Face);
oFrontFace = oExtrude1.StartFaces[1];
// Create a new sketch on this face, but use the method that allows you to
// control the orientation and orgin of the new sketch.
oSketch = oCompDef.Sketches.AddWithOrientation(oFrontFace, oCompDef.WorkAxes[1], true, true, oCompDef.WorkPoints[1]);
// Create a sketch circle with the center at (2, 1.5).
SketchCircle oCircle = default(SketchCircle);
oCircle = oSketch.SketchCircles.AddByCenterRadius(oTransGeom.CreatePoint2d(2, 1.5), 0.5);
// Create a profile.
oProfile = oSketch.Profiles.AddForSolid();
// Create the second extrude (a hole).
ExtrudeFeature oExtrude2 = default(ExtrudeFeature);
oExtrude2 = oCompDef.Features.ExtrudeFeatures.AddByThroughAllExtent(oProfile, PartFeatureExtentDirectionEnum.kNegativeExtentDirection, PartFeatureOperationEnum.kCutOperation);
// Create a mate iMateDefinition on a side face of the first extrude.
MateiMateDefinition oMateiMateDefinition = default(MateiMateDefinition);
oMateiMateDefinition = oCompDef.iMateDefinitions.AddMateiMateDefinition(oExtrude1.SideFaces[1], 0, InferredTypeEnum.kNoInference, null, "MateA");
// Create a match list of names to use for the next iMateDefinition.
string[] strMatchList = new string[3];
strMatchList[0] = "InsertA";
strMatchList[1] = "InsertB";
strMatchList[2] = "InsertC";
// Create an insert iMateDefinition on the cylindrical face of the second extrude.
InsertiMateDefinition oInsertiMateDefinition = default(InsertiMateDefinition);
oInsertiMateDefinition = oCompDef.iMateDefinitions.AddInsertiMateDefinition(oExtrude2.SideFaces[1], false, 0, null, "InsertA", strMatchList);
}
private void circleSticker(ref PartDocument pDoc, double heigth, double width, double R, string txt = "", double thickness = 0.1)
{
PartComponentDefinition compDef = pDoc.ComponentDefinition;
heigth /= 10; width /= 10; thickness /= 10;
PlanarSketch ps = compDef.Sketches.Add(compDef.WorkPlanes[2]);
//SketchEntity origin = ps.AddByProjectingEntity(compDef.WorkPoints[1]);
double alfa = alfaFromL(heigth, R);
Point2d startPt = m_TG.CreatePoint2d();
SketchArc arc = ps.SketchArcs.AddByCenterStartSweepAngle(startPt, R, 3.1415926 / 2 - alfa / 2, alfa);
//ObjectCollection objs = invApp.TransientObjects.CreateObjectCollection();
//objs.Add(arc);
//ps.RotateSketchObjects(objs, arc.CenterSketchPoint.Geometry, 1,RemoveConstraints:true);
//arc = (SketchArc)en[1];
//ps.GeometricConstraints.AddVerticalAlign((SketchPoint)origin, arc.CenterSketchPoint);
ObjectCollection objCol = invApp.TransientObjects.CreateObjectCollection();
objCol.Add(arc);
SketchEntitiesEnumerator sArc = ps.OffsetSketchEntitiesUsingDistance(objCol, thickness, true);
SketchArc arc2 = (SketchArc)sArc[1];
ps.SketchLines.AddByTwoPoints(arc2.StartSketchPoint, arc.StartSketchPoint);
ps.SketchLines.AddByTwoPoints(arc2.EndSketchPoint, arc.EndSketchPoint);
Profile pr = ps.Profiles.AddForSolid();
ExtrudeDefinition extDef = compDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(pr, PartFeatureOperationEnum.kNewBodyOperation);
extDef.SetDistanceExtent(width / 2, PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
extDef.SetDistanceExtentTwo(width / 2);
ExtrudeFeature extr = compDef.Features.ExtrudeFeatures.Add(extDef);
extr.Appearance = InvDoc.u.createColor(pDoc, "white_", "белый_", 255, 255, 255);
if (txt != "")
{
ps = compDef.Sketches.Add(compDef.WorkPlanes[3]);
Inventor.TextBox tb = ps.TextBoxes.AddByRectangle(pts(-heigth, -width), pts(heigth, width), txt);
tb.HorizontalJustification = HorizontalTextAlignmentEnum.kAlignTextCenter;
tb.VerticalJustification = VerticalTextAlignmentEnum.kAlignTextMiddle;
tb.SingleLineText = false;
tb.Rotation = Math.PI;
if (mirror)
{
tb.Rotation = Math.PI;
}
if (this.radioButton1.Checked == false)
{
//ObjectCollection col = invApp.TransientObjects.CreateObjectCollection();
//col.Add(tb);
//ps.RotateSketchObjects(col, pt, Math.PI / 4);
tb.Rotation -= Math.PI / 2;
}
Face face2 = null;
foreach (Face f in compDef.SurfaceBodies[1].Faces)
{
if (f.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
double val = Math.Round(((Cylinder)f.Geometry).Radius, 3) * 100;
val = Math.Round(val, 0);
if /*((int)val == (int)((R + thickness)*100))*/ (InvDoc.u.eq(val, (R + thickness) * 100))
{
face2 = f; break;
}
}
}
EmbossFeature emb = compDef.Features.EmbossFeatures.AddEmbossFromFace(ps.Profiles.AddForSolid(false, ps.TextBoxes), 0.0005, PartFeatureExtentDirectionEnum.kNegativeExtentDirection, WrapFace: face2);
emb.Appearance = InvDoc.u.createColor(pDoc, "black_", "черный_", 0, 0, 0);
}
}
