/// <summary>
/// 发送改判信息给NC
/// </summary>
/// <param name="xmlFileName">xml完整路径</param>
/// <returns></returns>
public string SendXml_DM(string xmlFileName, string fydh)
{
try
{
string name = "FYSJ" + fydh + ".xml";
xmlFileName += "\\NCXML\\" + name;
Mod_TMD_DISPATCH modDispatch = dal_TMD_DISPATCH.GetModel(fydh);
XmlDocument xmlDoc = new XmlDocument();
//创建类型声明节点
XmlNode node = xmlDoc.CreateXmlDeclaration("1.0", "UTF-8", "no");
xmlDoc.AppendChild(node);
//创建根节点
XmlElement root = xmlDoc.CreateElement("ufinterface");
#region//给节点属性赋值
root.SetAttribute("billtype", "7F");
root.SetAttribute("filename", name);
root.SetAttribute("isexchange", "Y");
root.SetAttribute("operation", "req");
root.SetAttribute("proc", "update");
root.SetAttribute("receiver", "101");
root.SetAttribute("replace", "Y");
root.SetAttribute("roottag", "bill");
root.SetAttribute("sender", "1107");
#endregion
xmlDoc.AppendChild(root);
//创建子根节点
XmlElement bill = xmlDoc.CreateElement("bill");
bill.SetAttribute("id", modDispatch.C_GUID);//发运单表头主键
root.AppendChild(bill);
XmlNode head = xmlDoc.CreateNode(XmlNodeType.Element, "bill_head", null);
#region //表头_order_head
CreateNode(xmlDoc, head, "apprdate", Convert.ToDateTime(modDispatch.D_APPROVE_DT).ToString("yyy-MM-dd")); //审批日期
CreateNode(xmlDoc, head, "bconfirm", "N");
CreateNode(xmlDoc, head, "billdate", Convert.ToDateTime(modDispatch.D_CREATE_DT).ToString("yyy-MM-dd")); //制单日期
CreateNode(xmlDoc, head, "billnewaddtime", Convert.ToDateTime(modDispatch.D_CREATE_DT).ToString("yyy-MM-dd HH:mm:ss"));
CreateNode(xmlDoc, head, "bisopen", "");
CreateNode(xmlDoc, head, "bmissionbill", "N");
CreateNode(xmlDoc, head, "bmustreturnbillcode", "");
CreateNode(xmlDoc, head, "btestbyinvoice", "");
CreateNode(xmlDoc, head, "clastmodifierid", modDispatch.C_EMP_ID);//最后修改人
CreateNode(xmlDoc, head, "clastmodiname", "");
CreateNode(xmlDoc, head, "curbilltype", "");
CreateNode(xmlDoc, head, "dallpacknum", "0");
CreateNode(xmlDoc, head, "dallvolumn", "0");
CreateNode(xmlDoc, head, "dallweight", "0");
CreateNode(xmlDoc, head, "dfactweight", "");
CreateNode(xmlDoc, head, "dr", "0");
CreateNode(xmlDoc, head, "dtotal", "");
CreateNode(xmlDoc, head, "employee", "");
CreateNode(xmlDoc, head, "h_confirmarrivedate", "");
CreateNode(xmlDoc, head, "iprintcount", "");
CreateNode(xmlDoc, head, "isendtype", "3");//运费类别
CreateNode(xmlDoc, head, "linkman1", "");
CreateNode(xmlDoc, head, "oprdepartname", "");
CreateNode(xmlDoc, head, "phone1", "");
CreateNode(xmlDoc, head, "pk_defdoc0", modDispatch.C_IS_WIRESALE_ID); //是否线材销售主键
CreateNode(xmlDoc, head, "pk_defdoc1", "");
CreateNode(xmlDoc, head, "pk_defdoc10", "");
CreateNode(xmlDoc, head, "pk_defdoc11", "");
CreateNode(xmlDoc, head, "pk_defdoc12", "");
CreateNode(xmlDoc, head, "pk_defdoc13", "");
CreateNode(xmlDoc, head, "pk_defdoc14", "");
CreateNode(xmlDoc, head, "pk_defdoc15", "");
CreateNode(xmlDoc, head, "pk_defdoc16", "");
CreateNode(xmlDoc, head, "pk_defdoc17", "");
CreateNode(xmlDoc, head, "pk_defdoc18", "");
CreateNode(xmlDoc, head, "pk_defdoc19", "");
CreateNode(xmlDoc, head, "pk_defdoc2", "");
CreateNode(xmlDoc, head, "pk_defdoc3", "");
CreateNode(xmlDoc, head, "pk_defdoc4", "");
CreateNode(xmlDoc, head, "pk_defdoc5", "");
CreateNode(xmlDoc, head, "pk_defdoc6", "");
CreateNode(xmlDoc, head, "pk_defdoc7", "");
CreateNode(xmlDoc, head, "pk_defdoc8", "");
CreateNode(xmlDoc, head, "pk_defdoc9", "");
CreateNode(xmlDoc, head, "pk_delivbill_h", ""); //发运单表头主键
CreateNode(xmlDoc, head, "pkapprperson", "");
CreateNode(xmlDoc, head, "pkbillperson", modDispatch.C_CREATE_ID); //制单人
CreateNode(xmlDoc, head, "pkcorpforgenoid", "1001");
CreateNode(xmlDoc, head, "pkdelivmode", modDispatch.C_SHIPVIA); //发运方式主键
CreateNode(xmlDoc, head, "pkdelivorg", "1001NC10000000006EHS"); //发运组织主键固定
CreateNode(xmlDoc, head, "pkdelivroute", "1001NC10000000006EHV"); //发运路线主键 固定
CreateNode(xmlDoc, head, "pkdriver", "");
CreateNode(xmlDoc, head, "pkoperator", modDispatch.C_BUSINESS_ID); //业务员主键
CreateNode(xmlDoc, head, "pkoprdepart", modDispatch.C_BUSINESS_DEPT); //业务部门主键
CreateNode(xmlDoc, head, "pksendperson", "");
CreateNode(xmlDoc, head, "pktrancust", modDispatch.C_COMCAR); //承运商
CreateNode(xmlDoc, head, "pktranorg", "");
CreateNode(xmlDoc, head, "pkvehicle", "");
CreateNode(xmlDoc, head, "pkvehicletype", "");
CreateNode(xmlDoc, head, "returndate", "");
CreateNode(xmlDoc, head, "returntime", "");
CreateNode(xmlDoc, head, "senddate", Convert.ToDateTime(modDispatch.D_DISP_DT).ToString("yyy-MM-dd"));//发运日期
CreateNode(xmlDoc, head, "startdate", "");
CreateNode(xmlDoc, head, "starttime", "");
CreateNode(xmlDoc, head, "taudittime", "");
CreateNode(xmlDoc, head, "tlastmodifytime", Convert.ToDateTime(modDispatch.D_MOD_DT).ToString("yyy-MM-dd HH:mm:ss")); //最后修改时间
CreateNode(xmlDoc, head, "tmaketime", Convert.ToDateTime(modDispatch.D_CREATE_DT).ToString("yyy-MM-dd HH:mm:ss")); // 制单时间
CreateNode(xmlDoc, head, "ts", Convert.ToDateTime(modDispatch.D_CREATE_DT).ToString("yyy-MM-dd HH:mm:ss"));
CreateNode(xmlDoc, head, "userid", modDispatch.C_CREATE_ID); //制单人
CreateNode(xmlDoc, head, "vapprpersonname", "");
CreateNode(xmlDoc, head, "vbillpersonname", "");
CreateNode(xmlDoc, head, "vdelivbillcode", modDispatch.C_ID);//发运单单据号
CreateNode(xmlDoc, head, "vdoname", "");
CreateNode(xmlDoc, head, "vdrivername", "");
CreateNode(xmlDoc, head, "vehiclelicense", "");
CreateNode(xmlDoc, head, "vnote", "");
CreateNode(xmlDoc, head, "voldDelivbillcode", "");
CreateNode(xmlDoc, head, "vroutedescr", "");
CreateNode(xmlDoc, head, "vroutename", "");
CreateNode(xmlDoc, head, "vsendtypename", "");
CreateNode(xmlDoc, head, "vtranname", "");
CreateNode(xmlDoc, head, "vtranorgname", "");
CreateNode(xmlDoc, head, "vuserdef0", modDispatch.C_IS_WIRESALE);// 是否线材销售 是/ 否 *****
CreateNode(xmlDoc, head, "vuserdef1", "");
CreateNode(xmlDoc, head, "vuserdef10", "");
CreateNode(xmlDoc, head, "vuserdef11", "");
CreateNode(xmlDoc, head, "vuserdef12", "");
CreateNode(xmlDoc, head, "vuserdef13", "");
CreateNode(xmlDoc, head, "vuserdef14", "");
CreateNode(xmlDoc, head, "vuserdef15", "");
CreateNode(xmlDoc, head, "vuserdef16", "");
CreateNode(xmlDoc, head, "vuserdef17", "");
CreateNode(xmlDoc, head, "vuserdef18", "");
CreateNode(xmlDoc, head, "vuserdef19", "");
CreateNode(xmlDoc, head, "vuserdef2", "");
CreateNode(xmlDoc, head, "vuserdef3", "Y"); //是否已导出
CreateNode(xmlDoc, head, "vuserdef4", modDispatch.C_LIC_PLA_NO); //车牌号
CreateNode(xmlDoc, head, "vuserdef5", "");
CreateNode(xmlDoc, head, "vuserdef6", "");
CreateNode(xmlDoc, head, "vuserdef7", "");
CreateNode(xmlDoc, head, "vuserdef8", "");
CreateNode(xmlDoc, head, "vuserdef9", "");
CreateNode(xmlDoc, head, "vvehiclename", "");
CreateNode(xmlDoc, head, "vvhcltypename", "");
#endregion
bill.AppendChild(head);
XmlElement body = xmlDoc.CreateElement("bill_body");
bill.AppendChild(body);
DataTable dt = GetZJBList(fydh).Tables[0];
if (dt.Rows.Count > 0)
{
for (int i = 0; i < dt.Rows.Count; i++)
{
int rowno = i + 1;
Mod_TMP_DAYPLAN modDayPlan = dal_TMP_DAYPLAN.GetModel(dt.Rows[i]["C_PLAN_ID"].ToString());
if (modDayPlan != null)
{
#region //实体参数
Mod_TMO_ORDER modOrder = dal_TMO_ORDER.GetModel(modDayPlan.C_PKBILLB);
Mod_TPB_LINEWH mbck = dal_TPB_LINEWH.GetModel_Interface_Trans(dt.Rows[i]["C_SEND_STOCK"].ToString()); //目标仓库
Mod_TPB_SLABWH slabwh = dal_TPB_SLABWH.GetModel_Interface_Trans(dt.Rows[i]["C_SEND_STOCK"].ToString());
Mod_TS_CUSTFILE modCust = dal_TS_CUSTFILE.GetCustModel(modDayPlan.C_PKCUST); //客户档案
Mod_TMB_AREA modArea = dal_TMB_AREA.GetModel(modDayPlan.C_PKARRIVEAREA); //区域
Mod_TB_MATRL_MAIN modMat = dal_TB_MATRL_MAIN.GetMatModel(modDayPlan.C_PKINV); //物料
Mod_TQB_CHECKSTATE mod_TQB_CHECKSTATE = dal_TQB_CHECKSTATE.GetModelByName(dt.Rows[i]["C_ZLDJ"].ToString(), "1001");
Mod_TMD_DISPATCHDETAILS modfyditem = dal_fyditem.GetModel(dt.Rows[i]["C_PK_NCID"].ToString());
string addrpk = "";
DataTable dtaddess = dal_TMB_AREA.GetAreaAddress(modfyditem.C_SEND_AREA).Tables[0];
if (dtaddess.Rows.Count > 0)
{
addrpk = dtaddess.Rows[0]["PK_ADDRESS"].ToString();
}
#endregion
decimal dunitprice = Convert.ToDecimal(modDayPlan.N_UNITPRICE); //含税单价
string wgt = dt.Rows[i]["N_JZ"].ToString(); //重量
string num = dt.Rows[i]["N_NUM"].ToString(); //数量
decimal dmoney = dunitprice * Convert.ToDecimal(wgt); //订单金额
XmlNode item = xmlDoc.CreateNode(XmlNodeType.Element, "item", null);
#region //表体_item
CreateNode(xmlDoc, item, "bappendent", "");
CreateNode(xmlDoc, item, "bcloseout", "");
CreateNode(xmlDoc, item, "bcloseout_old", "");
CreateNode(xmlDoc, item, "blargess", "N");
CreateNode(xmlDoc, item, "borderreturn", "N");
CreateNode(xmlDoc, item, "breceiveinform", "");
CreateNode(xmlDoc, item, "bsigned", "");
CreateNode(xmlDoc, item, "btestbyinvoice", "");
CreateNode(xmlDoc, item, "carrivecorpname", "");
CreateNode(xmlDoc, item, "cbiztype", modDayPlan.C_BIZTYPE); //业务类型
CreateNode(xmlDoc, item, "ccheckstate_bid", mod_TQB_CHECKSTATE.C_ID); //质量等级**
CreateNode(xmlDoc, item, "ccheckstatename", "");
CreateNode(xmlDoc, item, "cfreezeid", "");
CreateNode(xmlDoc, item, "cinvmanid", "");
CreateNode(xmlDoc, item, "confirmarrivedate", "");
CreateNode(xmlDoc, item, "cquoteunitid", modDayPlan.C_UNITID);//报价计量单位ID
CreateNode(xmlDoc, item, "cquoteunitname", "");
CreateNode(xmlDoc, item, "creceiptcorp", "");
CreateNode(xmlDoc, item, "creceiptcorpid", modDayPlan.C_RECEIPTCORPID);//收货单位
CreateNode(xmlDoc, item, "csendcorp", "");
CreateNode(xmlDoc, item, "csendcorpid", "");
CreateNode(xmlDoc, item, "dcancelassistnum", "");
CreateNode(xmlDoc, item, "dcancelnum", "");
CreateNode(xmlDoc, item, "dfee", "");
CreateNode(xmlDoc, item, "dfeeitem", "");
CreateNode(xmlDoc, item, "dinvassist", num); //辅数量-件数
CreateNode(xmlDoc, item, "dinvnum", wgt); //存货数量
CreateNode(xmlDoc, item, "dinvweight", "");
CreateNode(xmlDoc, item, "dmileage", "");
CreateNode(xmlDoc, item, "dmoney", dmoney.ToString());//订单金额
CreateNode(xmlDoc, item, "doutassistnum", "");
CreateNode(xmlDoc, item, "doutnum", "");
CreateNode(xmlDoc, item, "doutnummargin", "");
CreateNode(xmlDoc, item, "dpackboxnum", "");
CreateNode(xmlDoc, item, "dpacknum", "");
CreateNode(xmlDoc, item, "dpackvolumn", "");
CreateNode(xmlDoc, item, "dpackweight", "");
CreateNode(xmlDoc, item, "dr", "0");
CreateNode(xmlDoc, item, "dreturnassistnum", "");
CreateNode(xmlDoc, item, "dreturnnum", "");
CreateNode(xmlDoc, item, "dsignasnum", "");
CreateNode(xmlDoc, item, "dsignassistnum", "");
CreateNode(xmlDoc, item, "dsignnum", "");
CreateNode(xmlDoc, item, "dsourcerow", "");
CreateNode(xmlDoc, item, "dtotalout", "");
CreateNode(xmlDoc, item, "dunitprice", dunitprice.ToString());//含税单价
CreateNode(xmlDoc, item, "dvolumn", "");
CreateNode(xmlDoc, item, "dwaylossasnum", "");
CreateNode(xmlDoc, item, "dwaylossnum", "");
CreateNode(xmlDoc, item, "hsl", "");
CreateNode(xmlDoc, item, "iattitude", "");
CreateNode(xmlDoc, item, "ibatchstatus", "0");
CreateNode(xmlDoc, item, "ibetimes", "");
CreateNode(xmlDoc, item, "iloadnum", "");
CreateNode(xmlDoc, item, "ilockstatus", "");
CreateNode(xmlDoc, item, "ionroadtime", "");
CreateNode(xmlDoc, item, "ipacking", "");
CreateNode(xmlDoc, item, "irownumber", rowno.ToString());//行号
CreateNode(xmlDoc, item, "irowstatus", "0");
CreateNode(xmlDoc, item, "ischeckatp", "N");
CreateNode(xmlDoc, item, "linkman1", "");
CreateNode(xmlDoc, item, "nassistnetwgt", num);
CreateNode(xmlDoc, item, "nfeedbacknum", wgt); //回写上游数量
CreateNode(xmlDoc, item, "nnetwgt", wgt); //净重
CreateNode(xmlDoc, item, "nquoteunitnum", wgt); //报价计量单位数量？-存货数量
CreateNode(xmlDoc, item, "nquoteunitrate", "1"); //报价计量单位换算率固定
CreateNode(xmlDoc, item, "ntotalshouldoutnum", "");
CreateNode(xmlDoc, item, "orderplantime", "");
CreateNode(xmlDoc, item, "packsortcode", "");
CreateNode(xmlDoc, item, "packsortname", "");
CreateNode(xmlDoc, item, "phone1", "");//****?
CreateNode(xmlDoc, item, "pk_corp", "");
CreateNode(xmlDoc, item, "pk_defdoc0", "");
CreateNode(xmlDoc, item, "pk_defdoc1", "");
CreateNode(xmlDoc, item, "pk_defdoc10", "");
CreateNode(xmlDoc, item, "pk_defdoc11", "");
CreateNode(xmlDoc, item, "pk_defdoc12", "");
CreateNode(xmlDoc, item, "pk_defdoc13", "");
CreateNode(xmlDoc, item, "pk_defdoc14", "");
CreateNode(xmlDoc, item, "pk_defdoc15", "");
CreateNode(xmlDoc, item, "pk_defdoc16", "");
CreateNode(xmlDoc, item, "pk_defdoc17", "");
CreateNode(xmlDoc, item, "pk_defdoc18", "");
CreateNode(xmlDoc, item, "pk_defdoc19", "");
CreateNode(xmlDoc, item, "pk_defdoc2", "");
CreateNode(xmlDoc, item, "pk_defdoc3", "");
CreateNode(xmlDoc, item, "pk_defdoc4", "");
CreateNode(xmlDoc, item, "pk_defdoc5", "");
CreateNode(xmlDoc, item, "pk_defdoc6", "");
CreateNode(xmlDoc, item, "pk_defdoc7", "");
CreateNode(xmlDoc, item, "pk_defdoc8", "");
CreateNode(xmlDoc, item, "pk_defdoc9", "");
CreateNode(xmlDoc, item, "pk_delivbill_b", ""); //置空
CreateNode(xmlDoc, item, "pk_delivbill_h", "");
CreateNode(xmlDoc, item, "pk_invbasdoc", modOrder.C_INVBASDOCID); //存货档案主键
CreateNode(xmlDoc, item, "pk_packsort", "");
CreateNode(xmlDoc, item, "pk_transcontainer", "");
CreateNode(xmlDoc, item, "pkarriveaddress", addrpk); //到货地点
CreateNode(xmlDoc, item, "pkarrivearea", modfyditem.C_SEND_AREA); //到货地区主键
CreateNode(xmlDoc, item, "pkarrivecorp", "");
CreateNode(xmlDoc, item, "pkassistmeasure", modOrder.C_FUNITID); //辅计量单位
CreateNode(xmlDoc, item, "pkbasinv", modOrder.C_INVBASDOCID); //存货档案主键
CreateNode(xmlDoc, item, "pkbasreceiptcorp", modCust.C_NC_ID); //客户主键
CreateNode(xmlDoc, item, "pkbassendcorp", "");
CreateNode(xmlDoc, item, "pkconsign", "");
CreateNode(xmlDoc, item, "pkcorpforgenoid", modDayPlan.C_PKSALECORP); //销售公司（1001）
CreateNode(xmlDoc, item, "pkcusbasdoc", modCust.C_NC_ID); //客户主键
CreateNode(xmlDoc, item, "pkcusmandoc", modDayPlan.C_PKCUST); //客户管理主键
CreateNode(xmlDoc, item, "pkcustinvoice", "");
CreateNode(xmlDoc, item, "pkdayplan", "");
CreateNode(xmlDoc, item, "pkdestrep", "");
CreateNode(xmlDoc, item, "pkdeststockorg", "");
CreateNode(xmlDoc, item, "pkinv", modOrder.C_INVENTORYID);//存货管理档案主键
CreateNode(xmlDoc, item, "pkinvoice", "");
CreateNode(xmlDoc, item, "pkitem", "");
CreateNode(xmlDoc, item, "pkitemperiod", "");
CreateNode(xmlDoc, item, "pkoperator", modDayPlan.C_PKOPERATOR); //业务员ID
CreateNode(xmlDoc, item, "pkoprdepart", modDayPlan.C_PKOPRDEPART); //业务员部门
CreateNode(xmlDoc, item, "pkorder", "");
CreateNode(xmlDoc, item, "pkorderplanid", "");
CreateNode(xmlDoc, item, "pkorderrow", "");
CreateNode(xmlDoc, item, "pkpackboxtype", "");
CreateNode(xmlDoc, item, "pksalecorp", "1001");
CreateNode(xmlDoc, item, "pksalegrp", modDayPlan.C_PKSALEORG); //销售组织主键
CreateNode(xmlDoc, item, "pksendaddress", "0001AA1000000002LFNT"); //发货地点
CreateNode(xmlDoc, item, "pksendarea", "dqda0000000000000057"); //发货地区
if (mbck != null)
{
CreateNode(xmlDoc, item, "pksendstock", mbck.C_ID);//发货仓库
}
else
{
CreateNode(xmlDoc, item, "pksendstock", slabwh.C_ID); //发货仓库
}
CreateNode(xmlDoc, item, "pksendstockorg", "1001NC10000000000669"); //发货库存组织主键-固定
CreateNode(xmlDoc, item, "pksrccalbodyar", "");
CreateNode(xmlDoc, item, "pkunit", "");
CreateNode(xmlDoc, item, "plantime", "");
CreateNode(xmlDoc, item, "receivedate", "");
CreateNode(xmlDoc, item, "requireday", Convert.ToDateTime(modDayPlan.D_REQUIREDATE).ToString("yyy-MM-dd")); //要求到货日期
CreateNode(xmlDoc, item, "sourcebillts", "");
CreateNode(xmlDoc, item, "ts", ""); //HH:mm:ss
CreateNode(xmlDoc, item, "ufdtmp", "");
CreateNode(xmlDoc, item, "userid", "");
CreateNode(xmlDoc, item, "varriveaddress", "其他地区");
CreateNode(xmlDoc, item, "vassistmeaname", "");
string batch = "";
if (modMat.C_MAT_TYPE == "6")
{
if (dt.Rows[i]["C_BATCH_NO"].ToString() != "")
{
batch = dt.Rows[i]["C_BATCH_NO"].ToString();
}
else
{
batch = dt.Rows[i]["C_STOVE"].ToString();
}
}
if (modMat.C_MAT_TYPE == "8")
{
batch = dt.Rows[i]["C_BATCH_NO"].ToString();
}
CreateNode(xmlDoc, item, "vbatchcode", batch);
CreateNode(xmlDoc, item, "vbilltype", "30");
CreateNode(xmlDoc, item, "vbilltypename", "");
CreateNode(xmlDoc, item, "vcargcode", "");
CreateNode(xmlDoc, item, "vconsign", "");
CreateNode(xmlDoc, item, "vcontainername", "");
CreateNode(xmlDoc, item, "vcustcode", modCust.C_NO); //客户编码
CreateNode(xmlDoc, item, "vcustname", modCust.C_NAME); //客户名称
CreateNode(xmlDoc, item, "vdayplancode", modDayPlan.C_PLCODE); //对应日计划单据号
CreateNode(xmlDoc, item, "vdestaddress", modfyditem.C_AREA); //收货地址
CreateNode(xmlDoc, item, "vdestarea", modfyditem.C_SEND_AREA); //收货地区
CreateNode(xmlDoc, item, "vdeststoreaddre", "");
CreateNode(xmlDoc, item, "vdeststorename", "");
CreateNode(xmlDoc, item, "vdeststoreorgname", "");
CreateNode(xmlDoc, item, "vfree0", "");
CreateNode(xmlDoc, item, "vfree1", modDayPlan.C_VFREE1); //自由项1
CreateNode(xmlDoc, item, "vfree10", dt.Rows[i]["C_PK_NCID"].ToString()); //CRM发运单表体主键//C_PK_NCID
CreateNode(xmlDoc, item, "vfree2", modDayPlan.C_VFREE2); //自由项2
CreateNode(xmlDoc, item, "vfree3", dt.Rows[i]["C_BZYQ"].ToString()); //包装钢坯传空
CreateNode(xmlDoc, item, "vfree4", "");
CreateNode(xmlDoc, item, "vfree5", "");
CreateNode(xmlDoc, item, "vfree6", "");
CreateNode(xmlDoc, item, "vfree7", "");
CreateNode(xmlDoc, item, "vfree8", modDayPlan.C_ID); //CRM发运日计划主键
CreateNode(xmlDoc, item, "vfree9", modDispatch.C_GUID); // CRM发运单表头主键
CreateNode(xmlDoc, item, "vfreeid1", "");
CreateNode(xmlDoc, item, "vfreeid10", "");
CreateNode(xmlDoc, item, "vfreeid2", "");
CreateNode(xmlDoc, item, "vfreeid3", "");
CreateNode(xmlDoc, item, "vfreeid4", "");
CreateNode(xmlDoc, item, "vfreeid5", "");
CreateNode(xmlDoc, item, "vfreeid6", "");
CreateNode(xmlDoc, item, "vfreeid7", "");
CreateNode(xmlDoc, item, "vfreeid8", "");
CreateNode(xmlDoc, item, "vfreeid9", "");
CreateNode(xmlDoc, item, "vfreename1", "");
CreateNode(xmlDoc, item, "vfreename10", "");
CreateNode(xmlDoc, item, "vfreename2", "");
CreateNode(xmlDoc, item, "vfreename3", "");
CreateNode(xmlDoc, item, "vfreename4", "");
CreateNode(xmlDoc, item, "vfreename5", "");
CreateNode(xmlDoc, item, "vfreename6", "");
CreateNode(xmlDoc, item, "vfreename7", "");
CreateNode(xmlDoc, item, "vfreename8", "");
CreateNode(xmlDoc, item, "vfreename9", "");
CreateNode(xmlDoc, item, "vinvcode", modMat.C_MAT_CODE);
CreateNode(xmlDoc, item, "vinvname", "");
CreateNode(xmlDoc, item, "vinvoicecode", "");
CreateNode(xmlDoc, item, "vitemname", "");
CreateNode(xmlDoc, item, "vitemperiodname", "");
CreateNode(xmlDoc, item, "vnote", "");
CreateNode(xmlDoc, item, "voperatorname", "");
CreateNode(xmlDoc, item, "voprdepartname", "");
CreateNode(xmlDoc, item, "vordercode", modDayPlan.C_SALECODE);//销售单据号
CreateNode(xmlDoc, item, "vreceiptcorpname", "");
CreateNode(xmlDoc, item, "vsalecorpname", "");
CreateNode(xmlDoc, item, "vsaleorgname", "");
CreateNode(xmlDoc, item, "vsendaddr", "");
CreateNode(xmlDoc, item, "vsendaddress", "");
CreateNode(xmlDoc, item, "vsendarea", "");
CreateNode(xmlDoc, item, "vsendcorpname", "");
CreateNode(xmlDoc, item, "vsendstoreaddre", "");
CreateNode(xmlDoc, item, "vsendstorename", "");
CreateNode(xmlDoc, item, "vsendstoreorgaddre", "");
CreateNode(xmlDoc, item, "vsendstoreorgname", "");
CreateNode(xmlDoc, item, "vsignname", "");
CreateNode(xmlDoc, item, "vsignnote", "");
CreateNode(xmlDoc, item, "vspec", modMat.C_SPEC); //规格
CreateNode(xmlDoc, item, "vsrccalbodyarname", "");
CreateNode(xmlDoc, item, "vtype", modMat.C_STL_GRD); //钢种
CreateNode(xmlDoc, item, "vunit", modMat.C_ZJLDWMC); //主计量单位名称
CreateNode(xmlDoc, item, "vuserdef0", "");
CreateNode(xmlDoc, item, "vuserdef1", ""); //计量毛重日期*****
CreateNode(xmlDoc, item, "vuserdef10", modDayPlan.C_CONNO); //合同号
CreateNode(xmlDoc, item, "vuserdef11", "");
CreateNode(xmlDoc, item, "vuserdef12", "");
CreateNode(xmlDoc, item, "vuserdef13", "");
CreateNode(xmlDoc, item, "vuserdef14", "");
CreateNode(xmlDoc, item, "vuserdef15", "");
CreateNode(xmlDoc, item, "vuserdef16", "");
CreateNode(xmlDoc, item, "vuserdef17", "");
CreateNode(xmlDoc, item, "vuserdef18", "");
CreateNode(xmlDoc, item, "vuserdef19", "");
CreateNode(xmlDoc, item, "vuserdef2", ""); //毛重*****
CreateNode(xmlDoc, item, "vuserdef3", ""); //计量皮重日期****
CreateNode(xmlDoc, item, "vuserdef4", ""); //皮重
CreateNode(xmlDoc, item, "vuserdef5", ""); //净重
CreateNode(xmlDoc, item, "vuserdef6", ""); //计量毛重时间
CreateNode(xmlDoc, item, "vuserdef7", ""); //计量皮重时间
CreateNode(xmlDoc, item, "vuserdef8", "");
CreateNode(xmlDoc, item, "vuserdef9", "");
#endregion
body.AppendChild(item);
}
}
}
xmlDoc.Save(xmlFileName);
List <string> parem = dalSendNC.SendXML(xmlFileName);
if (parem[0] == "1")
{
return("1");
}
else
{
return(parem[1]);
}
}
catch (Exception ex)
{
return(ex.ToString());
}
}
/// <summary>
/// 上传NC
/// </summary>
/// <param name="list">委外组批计划ID（组批计划包含完工信息）</param>
public void SendToNC(List <string> list)
{
if (list.Any() == false)
{
throw new Exception("请选择后再上传");
}
var ids = "('" + string.Join("','", list) + "')";
var updateMods = dalWWMain.GetList($"C_ID IN {ids}").Tables[0].DataTableToList2 <Mod_TRC_ROLL_WW_MAIN>();
if (updateMods.Any() == false)
{
throw new Exception("没有需要上传NC的数据");
}
if (updateMods.Any(w => w.N_STATUS < 1 || w.N_STATUS == 30))
{
throw new Exception("只有状态为已完工或未上传完毕的，才能上传NC");
}
foreach (var item in updateMods)
{
if (string.IsNullOrEmpty(item.C_PRODUCE_EMP_ID))
{
item.C_PRODUCE_EMP_ID = "1001NC100000002SS9XB";
}
if (string.IsNullOrEmpty(item.C_EMP_ID))
{
item.C_EMP_ID = "1001NC100000002SS9XB";
}
// 获取用户信息
var planUser = dalUser.GetModel(item.C_EMP_ID); // 组批计划员
var productUser = dalUser.GetModel(item.C_PRODUCE_EMP_ID); // 生产人员
// 合同信息
var contractInfo = dalOrder.GetModel(item.C_ORD_ID);
if (contractInfo == null)
{
continue;
}
// 订单物料信息
var ordMatrl = bll_TB_MATRL_MAIN.GetModel(contractInfo.C_MAT_CODE);
if (contractInfo == null)
{
continue;
}
// 耗用线材物料信息
var consumeMatrl = bll_TB_MATRL_MAIN.GetModel(item.C_MAT_XC_CODE);
if (consumeMatrl == null)
{
continue;
}
// 线材批次信息
var xcBatchInfo = dalWWMain.GetItemList(item.C_ID).FirstOrDefault();
if (xcBatchInfo == null)
{
continue;
}
if (contractInfo == null || ordMatrl == null)
{
continue;
}
// 传入外委物料代码决定工序，获取ERP代码
var mod_TB_STA = dalTbSta.GetModelByCODE(Bll_TRC_ROLL_PRODCUT.GetStaCode(contractInfo.C_MAT_CODE));
if (item.N_STATUS == 1)
{
// 上传NC
var itemA1 = GetA1(contractInfo, ordMatrl, item, mod_TB_STA, planUser);
var a1Result = dalA1.SendXml_ROLL_A1(item.C_ID, string.Empty, "A1.xml", itemA1, AppDomain.CurrentDomain.BaseDirectory);
if (NCInterface.NCConfig.IsSendToNC)
{
// 状态0创建,10完工,21已传NC_A1,22已传NC_A2,23已传NC_A3,24已传NC_A4,25已传NC_A46，30上传NC完毕,
if (a1Result[0] == "1")
{
// 上传成功，更新状态
item.N_STATUS = 21;
dalWWMain.SetStatu(item);
}
else
{
throw new Exception(GetNCError(a1Result));
}
}
}
if (item.N_STATUS == 21)
{
// 上传NC
var itemA2 = GetA2(contractInfo, ordMatrl, item, mod_TB_STA, planUser);
var a2Result = dalA2.SendXml_ROLL_A2(item.C_ID, string.Empty, "A2.xml", itemA2, AppDomain.CurrentDomain.BaseDirectory);
if (NCInterface.NCConfig.IsSendToNC)
{
if (a2Result[0] == "1")
{
item.N_STATUS = 22;
// 上传成功，更新状态
dalWWMain.SetStatu(item);
}
else
{
throw new Exception(GetNCError(a2Result));
}
}
}
if (item.N_STATUS == 22)
{
// 上传NC
var itemA3 = GetA3(contractInfo, ordMatrl, consumeMatrl, item, mod_TB_STA, xcBatchInfo);
var a3Result = dalA3.SendXml_ROLL_A3(item.C_ID, string.Empty, "A3.xml", itemA3, AppDomain.CurrentDomain.BaseDirectory);
if (NCInterface.NCConfig.IsSendToNC)
{
if (a3Result[0] == "1")
{
// 上传成功，更新状态
item.N_STATUS = 23;
dalWWMain.SetStatu(item);
}
else
{
throw new Exception(GetNCError(a3Result));
}
}
}
if (item.N_STATUS == 23)
{
// 上传NC
var itemA4 = GetA4(contractInfo, ordMatrl, item, mod_TB_STA, productUser);
var a4Result = dalA4.SendXml_ROLL_A4(item.C_ID, string.Empty, item.C_ID + "A4.xml", itemA4, AppDomain.CurrentDomain.BaseDirectory);
if (NCInterface.NCConfig.IsSendToNC)
{
if (a4Result[0] == "1")
{
item.N_STATUS = 24;
// 上传成功，更新状态
dalWWMain.SetStatu(item);
}
else
{
throw new Exception(GetNCError(a4Result));
}
}
}
if (item.N_STATUS == 24)
{
// 上传NC
var item46 = Get46(contractInfo, ordMatrl, item, mod_TB_STA, productUser);
var a46Result = dal46.SendXml_ROLL_46(item.C_ID, string.Empty, "A46.xml", new List <NcRoll46> {
item46
}, AppDomain.CurrentDomain.BaseDirectory);
if (NCInterface.NCConfig.IsSendToNC)
{
if (a46Result[0] == "1")
{
item.N_STATUS = 25;
dalWWMain.SetStatu(item);
}
else
{
throw new Exception(GetNCError(a46Result));
}
}
}
if (item.N_STATUS == 25)
{
// 入库操作
RuKu(item, mod_TB_STA, contractInfo);
// 更新状态
item.N_STATUS = 30;
dalWWMain.SetStatu(item);
dalWWMain.SetDesignNo(item);
}
else
{
throw new Exception("上传NC失败");
}
}
}
/// <summary>
/// 发送炉次计划给NC
/// </summary>
/// <param name="xmlFileName">xml完整路径</param>
/// <param name="urlname">xml名称</param>
/// <param name="urlname">计划表主键</param>
/// <param name="c_stove">炉号</param>
/// <returns></returns>
public bool SendXml_SLAB_A2(string xmlFileName, string tsp_plan_sms_id, string stove)
{
try
{
string urlname = "A2LC" + stove + ".XML";//XML名称
string url = xmlFileName + "\\NCXML";
if (!Directory.Exists(url))
{
Directory.CreateDirectory(url);
}
//DataTable dt = dal_slab_mes.GetList("", "", stove, "", "").Tables[0];
Mod_TSP_PLAN_SMS mod_plan_sms = dal_plan_sms.GetModel(tsp_plan_sms_id); //连铸生产计划表
Mod_TPP_CAST_PLAN mod_cast_plan = dal_cast_plan.GetModel_PLAN_ID(tsp_plan_sms_id);
Mod_TB_MATRL_MAIN mod_mater_main = dal_mater_main.GetModel(mod_plan_sms.C_MATRL_NO); //物料主表
Mod_TS_USER mod_ts_user = dal_user.GetModel(mod_plan_sms.C_EMP_ID); //用户主表
Mod_TMO_ORDER mod_Order = dal_tmo_order.GetModel(mod_plan_sms.C_ORDER_NO);
Mod_TB_STA modSta = dalSta.GetModel(mod_plan_sms.C_CCM_ID);
if (mod_plan_sms == null)
{
return(false);
}
if (mod_cast_plan == null)
{
return(false);
}
if (mod_mater_main == null)
{
return(false);
}
if (mod_ts_user == null)
{
return(false);
}
if (mod_Order == null)
{
return(false);
}
if (modSta == null)
{
return(false);
}
XmlDocument xmlDoc = new XmlDocument();
//创建类型声明节点
XmlNode node = xmlDoc.CreateXmlDeclaration("1.0", "UTF-8", "no");
xmlDoc.AppendChild(node);
//创建根节点
XmlElement root = xmlDoc.CreateElement("ufinterface");
#region//给节点属性赋值
root.SetAttribute("billtype", "A2");
root.SetAttribute("filename", "");
root.SetAttribute("isexchange", "Y");
root.SetAttribute("operation", "req");
root.SetAttribute("proc", "add");
root.SetAttribute("receiver", "101");
root.SetAttribute("replace", "Y");
root.SetAttribute("roottag", "bill");
root.SetAttribute("sender", "1107");
#endregion
xmlDoc.AppendChild(root);
//创建子根节点
XmlElement bill = xmlDoc.CreateElement("bill");
#region//节点属性
bill.SetAttribute("id", mod_cast_plan.C_HEAT_ID);
#endregion
root.AppendChild(bill);
XmlNode head = xmlDoc.CreateNode(XmlNodeType.Element, "bill_head", null);
#region //表头_order_head
CreateNode(xmlDoc, head, "scddh", ""); //生产订单号 (空)
CreateNode(xmlDoc, head, "pk_poid", ""); //计划订单主键 (空)
CreateNode(xmlDoc, head, "jhddh", ""); //计划订单号 (空)
CreateNode(xmlDoc, head, "wlbmid", mod_mater_main.C_PK_INVBASDOC); //物料编码ID （C_PK_INVBASDOC）
CreateNode(xmlDoc, head, "pk_produce", ""); //物料PK
CreateNode(xmlDoc, head, "invcode", mod_mater_main.C_ID); //物料编码
CreateNode(xmlDoc, head, "invname", "");
CreateNode(xmlDoc, head, "pch", stove); //批次号
CreateNode(xmlDoc, head, "scbmid", "1001NC1000000000037T"); //生产部门ID
CreateNode(xmlDoc, head, "gzzxid", modSta.C_ERP_PK); //工作中心ID-连铸机号
CreateNode(xmlDoc, head, "gzzxbm", ""); //工作中心编码ID
CreateNode(xmlDoc, head, "ksid", ""); //客商ID
CreateNode(xmlDoc, head, "memo", ""); //备注
CreateNode(xmlDoc, head, "sfjj", ""); //是否加急
CreateNode(xmlDoc, head, "yxj", ""); //有效机时
CreateNode(xmlDoc, head, "bcid", "1001NC1000000000103W"); //班次ID
CreateNode(xmlDoc, head, "bzid", "1001NC100000002E7W1K"); //班组
CreateNode(xmlDoc, head, "jhkgrq", Convert.ToDateTime(mod_plan_sms.D_P_START_TIME.ToString()).ToString("yyyy-MM-dd")); //计划开工日期
CreateNode(xmlDoc, head, "jhwgrq", Convert.ToDateTime(mod_plan_sms.D_P_END_TIME.ToString()).ToString("yyyy-MM-dd")); //计划完工日期
CreateNode(xmlDoc, head, "jhkssj", Convert.ToDateTime(mod_plan_sms.D_P_START_TIME.ToString()).ToString("HH:mm:ss")); //计划开始时间
CreateNode(xmlDoc, head, "jhjssj", Convert.ToDateTime(mod_plan_sms.D_P_END_TIME.ToString()).ToString("HH:mm:ss")); //计划结束时间
CreateNode(xmlDoc, head, "sjkgrq", Convert.ToDateTime(mod_cast_plan.D_AIM_CASTINGSTART_TIME.ToString()).ToString("yyyy-MM-dd")); //实际开工日期
CreateNode(xmlDoc, head, "sjwgrq", Convert.ToDateTime(mod_cast_plan.D_AIM_CASTINGEND_TIME.ToString()).ToString("yyyy-MM-dd")); //实际完工日期
CreateNode(xmlDoc, head, "sjkssj", Convert.ToDateTime(mod_cast_plan.D_AIM_CASTINGSTART_TIME.ToString()).ToString("HH:mm:ss")); //实际开始时间
CreateNode(xmlDoc, head, "sjjssj", Convert.ToDateTime(mod_cast_plan.D_AIM_CASTINGEND_TIME.ToString()).ToString("HH:mm:ss")); //实际结束时间
CreateNode(xmlDoc, head, "jhwgsl", mod_plan_sms.N_SLAB_WGT.ToString()); //计划完工数量
CreateNode(xmlDoc, head, "fjhsl", mod_plan_sms.C_QUA); //辅计量数量
CreateNode(xmlDoc, head, "jldwid", mod_mater_main.C_PK_MEASDOC); //计量单位ID
CreateNode(xmlDoc, head, "fjlid", mod_mater_main.C_FJLDW); //辅计量ID
CreateNode(xmlDoc, head, "sjwgsl", mod_plan_sms.N_SLAB_WGT.ToString()); //实际完工数量
CreateNode(xmlDoc, head, "fwcsl", "");
CreateNode(xmlDoc, head, "zdy1", ""); //自定义项1
CreateNode(xmlDoc, head, "zdy2", ""); //自定义项2
CreateNode(xmlDoc, head, "zdy3", ""); //自定义项3
CreateNode(xmlDoc, head, "zdy4", ""); //自定义项4
CreateNode(xmlDoc, head, "zdy5", ""); //自定义项5
CreateNode(xmlDoc, head, "freeitemvalue1", mod_Order.C_FREE1);
CreateNode(xmlDoc, head, "freeitemvalue2", mod_Order.C_FREE2);
CreateNode(xmlDoc, head, "freeitemvalue3", "");
CreateNode(xmlDoc, head, "freeitemvalue4", "");
CreateNode(xmlDoc, head, "freeitemvalue5", mod_plan_sms.C_ID); //PCI计划订单主键（tsp_plan_sms主键）
CreateNode(xmlDoc, head, "pk_corp", "1001"); //公司ID
CreateNode(xmlDoc, head, "gcbm", "1001NC10000000000669"); //工厂
CreateNode(xmlDoc, head, "zdrid", mod_ts_user.C_ACCOUNT); //制单人
CreateNode(xmlDoc, head, "pk_moid", ""); //生产定单ID
#endregion
bill.AppendChild(head);
XmlElement body = xmlDoc.CreateElement("bill_body");
bill.AppendChild(body);
XmlNode item = xmlDoc.CreateNode(XmlNodeType.Element, "item", null);
body.AppendChild(item);
xmlDoc.Save(url + "\\" + urlname);
List <string> parem = dalSendNC.SendXML(url + "\\" + urlname);
if (parem[0] == "1")
{
return(true);
}
else
{
return(false);
}
}
catch
{
return(false);
}
}
/// <summary>
/// 发送计划给NC
/// </summary>
/// <param name="xmlFileName">xml完整路径</param>
/// <param name="tsp_plan_sms_id">炉号</param>
/// <param name="stove">炉号</param>
/// <returns></returns>
public string SendXml_SLAB_A1(string xmlFileName, string tsp_plan_sms_id, string stove)
{
try
{
string urlname = "A1ED" + stove + ".XML";//XML名称
string url = xmlFileName + "\\NCXML";
if (!Directory.Exists(url))
{
Directory.CreateDirectory(url);
}
Mod_TSP_PLAN_SMS mod_plan_sms = dal_plan_sms.GetModel_Trans(tsp_plan_sms_id); //连铸生产计划表
Mod_TB_MATRL_MAIN mod_mater_main = dal_mater_main.GetModel(mod_plan_sms.C_MATRL_NO); //物料主表
Mod_TMO_ORDER mod_Order = dal_tmo_order.GetModel(mod_plan_sms.C_ORDER_NO);
Mod_TB_STA modSta = dalSta.GetModel(mod_plan_sms.C_CCM_ID);
if (mod_plan_sms == null)
{
return("获取连铸计划失败！");
}
if (mod_mater_main == null)
{
return("获取物料信息失败！");
}
if (mod_Order == null)
{
return("获取订单信息失败！");
}
if (modSta == null)
{
return("获取工位信息失败！");
}
XmlDocument xmlDoc = new XmlDocument();
//创建类型声明节点
XmlNode node = xmlDoc.CreateXmlDeclaration("1.0", "UTF-8", "no");
xmlDoc.AppendChild(node);
//创建根节点
XmlElement root = xmlDoc.CreateElement("ufinterface");
#region//给节点属性赋值
root.SetAttribute("account", "1");
root.SetAttribute("billtype", "A1");
root.SetAttribute("filename", urlname);
root.SetAttribute("isexchange", "Y");
root.SetAttribute("proc", "add");
root.SetAttribute("receiver", "101");
root.SetAttribute("replace", "Y");
root.SetAttribute("roottag", "bill");
root.SetAttribute("sender", "1107");
#endregion
xmlDoc.AppendChild(root);
//创建子根节点
XmlElement so_order = xmlDoc.CreateElement("bill");
//#region//节点属性
//so_order.SetAttribute("id", dayplcode);
//#endregiond
root.AppendChild(so_order);
XmlNode head = xmlDoc.CreateNode(XmlNodeType.Element, "billhead", null);
#region //表头_order_head
CreateNode(xmlDoc, head, "bgbz", "1"); //变更标志
CreateNode(xmlDoc, head, "bmid", "1001NC10000000000345"); //部门ID
CreateNode(xmlDoc, head, "bmmc", ""); //部门名称
CreateNode(xmlDoc, head, "bomver", ""); //BOM版本
CreateNode(xmlDoc, head, "busiDate", "");
CreateNode(xmlDoc, head, "ckbm", ""); //仓库编码
CreateNode(xmlDoc, head, "ckbmid", ""); //仓库编码ID
CreateNode(xmlDoc, head, "ckmc", ""); //仓库名称
CreateNode(xmlDoc, head, "curwwsl", "");
CreateNode(xmlDoc, head, "ddlx", "1"); //订单类型
CreateNode(xmlDoc, head, "ddlxshow", "");
CreateNode(xmlDoc, head, "durl", ""); //资料路径
CreateNode(xmlDoc, head, "fah", "");
CreateNode(xmlDoc, head, "fjbz", "0"); //分解标记
CreateNode(xmlDoc, head, "fjldwid", ""); //辅计量单位ID
CreateNode(xmlDoc, head, "fjldwmc", "");
CreateNode(xmlDoc, head, "gcbm", "1001NC10000000000669"); //工厂
CreateNode(xmlDoc, head, "gcbmcode", "");
CreateNode(xmlDoc, head, "graphid", "");
CreateNode(xmlDoc, head, "gzzxbm", ""); //工作中心编码ID
CreateNode(xmlDoc, head, "gzzxid", ""); //工作中心ID
CreateNode(xmlDoc, head, "gzzxmc", ""); //工作中心名称
CreateNode(xmlDoc, head, "hbbz", "0"); //合并标志
CreateNode(xmlDoc, head, "hsl", ""); //换算率
CreateNode(xmlDoc, head, "invspec", "");
CreateNode(xmlDoc, head, "invtype", "");
CreateNode(xmlDoc, head, "jhbmbm", "");
CreateNode(xmlDoc, head, "jhddh", ""); //计划订单号
CreateNode(xmlDoc, head, "jhfaid", mod_mater_main.C_PK_PSID); //计划方案ID
CreateNode(xmlDoc, head, "jhlx", "0"); //备料计划类型(固定)
CreateNode(xmlDoc, head, "jhrq", Convert.ToDateTime(mod_plan_sms.D_P_START_TIME).ToString("yyyy-MM-dd")); //计划日期
CreateNode(xmlDoc, head, "jhxxsl", ""); //计划下限数量
CreateNode(xmlDoc, head, "jhyid", mod_mater_main.C_PLANEMP); //计划员ID
CreateNode(xmlDoc, head, "jldw", ""); //计量单位
CreateNode(xmlDoc, head, "jldwid", mod_mater_main.C_PK_MEASDOC); //计量单位ID
CreateNode(xmlDoc, head, "ksid", ""); //客商ID
CreateNode(xmlDoc, head, "memo", ""); //备注
CreateNode(xmlDoc, head, "pch", ""); //批次号
CreateNode(xmlDoc, head, "pk_corp", "1001"); //公司
CreateNode(xmlDoc, head, "pk_poid", ""); //计划订单主键
CreateNode(xmlDoc, head, "pk_produce", mod_mater_main.C_PK_PRODUCE); //物料PK
CreateNode(xmlDoc, head, "primaryKey", "");
CreateNode(xmlDoc, head, "pzh", ""); //配置号
CreateNode(xmlDoc, head, "qrrid", "");
CreateNode(xmlDoc, head, "qrrq", "");
CreateNode(xmlDoc, head, "rtver", "");
CreateNode(xmlDoc, head, "scbmbm", "");
CreateNode(xmlDoc, head, "scbmid", modSta.C_SSBMID);//生产部门ID
CreateNode(xmlDoc, head, "scbmmc", "");
CreateNode(xmlDoc, head, "scbz", "1");
CreateNode(xmlDoc, head, "scxid", "");
CreateNode(xmlDoc, head, "shrid", mod_plan_sms.C_EMP_ID); //操作人员
CreateNode(xmlDoc, head, "shrq", Convert.ToDateTime(mod_plan_sms.D_P_START_TIME).ToString("yyyy-MM-dd")); //审核日期
CreateNode(xmlDoc, head, "slrq", Convert.ToDateTime(mod_Order.D_NEED_DT).ToString("yyyy-MM-dd")); //需求日期
CreateNode(xmlDoc, head, "unitcode", "");
CreateNode(xmlDoc, head, "userid", "");
CreateNode(xmlDoc, head, "wlbm", "");
CreateNode(xmlDoc, head, "wlbmid", mod_mater_main.C_PK_INVBASDOC);
CreateNode(xmlDoc, head, "wlmc", "");
CreateNode(xmlDoc, head, "wpcsl", "0.00000000");
CreateNode(xmlDoc, head, "wwlx", "OA");
CreateNode(xmlDoc, head, "xdrq", Convert.ToDateTime(mod_plan_sms.D_P_START_TIME).ToString("yyyy-MM-dd")); //下单日期
CreateNode(xmlDoc, head, "xqfsl", "");
CreateNode(xmlDoc, head, "xqrq", Convert.ToDateTime(mod_Order.D_DELIVERY_DT).ToString("yyyy-MM-dd")); //交货日期
CreateNode(xmlDoc, head, "xqsl", mod_Order.N_WGT.ToString()); //计划量
CreateNode(xmlDoc, head, "xsddh", "");
CreateNode(xmlDoc, head, "xsddid", "");
CreateNode(xmlDoc, head, "xxbz", "0");
CreateNode(xmlDoc, head, "yfjsl", "");
CreateNode(xmlDoc, head, "ypcsl", "");
CreateNode(xmlDoc, head, "ywwsl", "");
CreateNode(xmlDoc, head, "zdrid", mod_plan_sms.C_EMP_ID); //制单人ID
CreateNode(xmlDoc, head, "zdrmc", "");
CreateNode(xmlDoc, head, "zdrq", Convert.ToDateTime(mod_plan_sms.D_MOD_DT).ToString("yyyy-MM-dd")); //制单日期
CreateNode(xmlDoc, head, "zdy1", "");
CreateNode(xmlDoc, head, "zdy2", "其它要求");
CreateNode(xmlDoc, head, "zdy3", "");
CreateNode(xmlDoc, head, "zdy4", "");
CreateNode(xmlDoc, head, "zdy5", "");
CreateNode(xmlDoc, head, "zt", "B");
CreateNode(xmlDoc, head, "zyx1", mod_Order.C_FREE1); //自由项1
CreateNode(xmlDoc, head, "zyx2", mod_Order.C_FREE2); //自由项2
CreateNode(xmlDoc, head, "zyx3", ""); //自由项3
CreateNode(xmlDoc, head, "zyx4", "");
CreateNode(xmlDoc, head, "zyx5", mod_Order.C_ID); //pci主键
#endregion
so_order.AppendChild(head);
xmlDoc.Save(url + "\\" + urlname);
List <string> parem = dalSendNC.SendXML(url + "\\" + urlname);
if (parem[0] == "1")
{
return("1");
}
else
{
return(parem[1].ToString());
}
}
catch (Exception ex)
{
return(ex.Message);
}
}
/// <summary>
/// 得到一个对象实体
/// </summary>
public Mod_TMO_ORDER GetModel(string C_ID)
{
return(dal.GetModel(C_ID));
}
