/// <summary>
/// 下发轧钢计划（单条）
/// </summary>
/// <param name="strPlanID">计划实例</param>
/// <param name="i_Wgt">重量</param>
/// <returns></returns>
public string DownPlans(Mod_TRP_PLAN_ROLL_ITEM_INFO itemInfo)
{
try
{
string result = "1";
TransactionHelper.BeginTransaction();
Dal_TB_STA dalTbSta = new Dal_TB_STA();
DateTime dtStart;
DateTime dtEnd;
Mod_TB_STA modSta = dalTbSta.GetModel(itemInfo.C_STA_ID);
Mod_TRP_PLAN_ROLL_ITEM modUp = dalTrpPlanRollItem.GetModel_Up(itemInfo.C_STA_ID);
if (modUp == null)
{
if (string.IsNullOrEmpty(modUp.D_P_START_TIME.ToString()))
{
TransactionHelper.RollBack();
return("系统没有已排的计划，请设置计划初始开始时间！");
}
else
{
dtStart = Convert.ToDateTime(modUp.D_P_START_TIME.ToString());
}
}
else
{
int hggTime = dalChangeTime.Get_Time2(itemInfo.C_STA_ID, modUp.C_SPEC, itemInfo.C_SPEC);//换规格时间
dtStart = Convert.ToDateTime(modUp.D_P_END_TIME).AddMinutes(hggTime);
}
double cn = Convert.ToDouble(itemInfo.N_ISSUE_WGT / Convert.ToDecimal(itemInfo.N_MACH_WGT.ToString()));
dtEnd = dtStart.AddHours(cn);//结束时间
#region TRP_PLAN_ROLL_ITEM赋值
Mod_TRP_PLAN_ROLL_ITEM modItem = new Mod_TRP_PLAN_ROLL_ITEM();
modItem.C_ID = itemInfo.C_ID;
modItem.C_PLAN_ROLL_ID = itemInfo.C_PLAN_ROLL_ID; //计划主表主键
modItem.N_STATUS = 1; //已下发
modItem.C_INITIALIZE_ITEM_ID = itemInfo.C_INITIALIZE_ITEM_ID;
modItem.C_ORDER_NO = itemInfo.C_ORDER_NO;
modItem.N_WGT = itemInfo.N_WGT;//下发量
modItem.C_MAT_CODE = itemInfo.C_MAT_CODE;
modItem.C_MAT_NAME = itemInfo.C_MAT_NAME;
modItem.C_TECH_PROT = itemInfo.C_TECH_PROT;
modItem.C_SPEC = itemInfo.C_SPEC;
modItem.C_STL_GRD = itemInfo.C_STL_GRD;
modItem.C_STD_CODE = itemInfo.C_STD_CODE;
modItem.N_USER_LEV = itemInfo.N_USER_LEV;
modItem.N_STL_GRD_LEV = itemInfo.N_STL_GRD_LEV;
modItem.N_ORDER_LEV = itemInfo.N_ORDER_LEV;
modItem.C_QUALIRY_LEV = itemInfo.C_QUALIRY_LEV;
modItem.D_NEED_DT = itemInfo.D_NEED_DT;
modItem.D_DELIVERY_DT = itemInfo.D_DELIVERY_DT;
modItem.D_DT = itemInfo.D_DT;
modItem.C_LINE_DESC = modSta.C_STA_DESC;
modItem.C_LINE_CODE = modSta.C_STA_CODE;
modItem.D_P_START_TIME = dtStart; //计划开始时间
modItem.D_P_END_TIME = dtEnd; //计划结束时间
modItem.N_PROD_TIME = itemInfo.N_PROD_TIME;
modItem.N_SORT = itemInfo.N_SORT;
modItem.N_ROLL_PROD_WGT = itemInfo.N_ROLL_PROD_WGT;//下发量
modItem.C_ROLL_PROD_EMP_ID = itemInfo.C_ROLL_PROD_EMP_ID;
modItem.C_STL_ROL_DT = itemInfo.C_STL_ROL_DT;
modItem.N_PROD_WGT = itemInfo.N_PROD_WGT;
modItem.N_WARE_WGT = itemInfo.N_WARE_WGT;
modItem.N_WARE_OUT_WGT = itemInfo.N_WARE_OUT_WGT;
modItem.N_FLAG = itemInfo.N_FLAG;
modItem.N_ISSUE_WGT = itemInfo.N_ISSUE_WGT;//下发量
modItem.C_CUST_NO = itemInfo.C_CUST_NO;
modItem.C_CUST_NAME = itemInfo.C_CUST_NAME;
modItem.C_SALE_CHANNEL = itemInfo.C_SALE_CHANNEL;
modItem.C_PACK = itemInfo.C_PACK;
modItem.C_DESIGN_NO = itemInfo.C_DESIGN_NO;
modItem.N_GROUP_WGT = itemInfo.N_GROUP_WGT;
modItem.C_STA_ID = modSta.C_ID;
modItem.D_START_TIME = itemInfo.D_START_TIME;
modItem.D_END_TIME = itemInfo.D_END_TIME;
modItem.C_EMP_ID = itemInfo.C_EMP_ID;
modItem.D_MOD_DT = RV.UI.ServerTime.timeNow();
modItem.N_ROLL_WGT = itemInfo.N_ROLL_WGT;
modItem.N_MACH_WGT = itemInfo.N_MACH_WGT;
modItem.C_CAST_NO = itemInfo.C_CAST_NO;
modItem.C_INITIALIZE_ID = itemInfo.C_INITIALIZE_ID;
modItem.C_FREE_TERM = itemInfo.C_FREE_TERM;
modItem.C_FREE_TERM2 = itemInfo.C_FREE_TERM2;
modItem.C_AREA = itemInfo.C_AREA;
modItem.C_PCLX = itemInfo.C_PCLX;
modItem.C_SFHL = itemInfo.C_SFHL;
modItem.D_HL_START_TIME = itemInfo.D_HL_START_TIME;
modItem.D_HL_END_TIME = itemInfo.D_HL_END_TIME;
modItem.C_SFHL_D = itemInfo.C_SFHL_D;
modItem.D_DHL_START_TIME = itemInfo.D_DHL_START_TIME;
modItem.D_DHL_END_TIME = itemInfo.D_DHL_END_TIME;
modItem.C_SFKP = itemInfo.C_SFKP;
modItem.D_KP_START_TIME = itemInfo.D_KP_START_TIME;
modItem.D_KP_END_TIME = itemInfo.D_KP_END_TIME;
modItem.C_SFXM = itemInfo.C_SFXM;
modItem.D_XM_START_TIME = itemInfo.D_XM_START_TIME;
modItem.D_XM_END_TIME = itemInfo.D_XM_END_TIME;
modItem.N_UPLOADSTATUS = itemInfo.N_UPLOADSTATUS;
modItem.C_MATRL_CODE_SLAB = itemInfo.C_MATRL_CODE_SLAB;
modItem.C_MATRL_NAME_SLAB = itemInfo.C_MATRL_NAME_SLAB;
modItem.C_SLAB_SIZE = itemInfo.C_SLAB_SIZE;
modItem.N_SLAB_LENGTH = itemInfo.N_SLAB_LENGTH;
modItem.N_SLAB_PW = itemInfo.N_SLAB_PW;
modItem.D_CAN_ROLL_TIME = itemInfo.D_CAN_ROLL_TIME;
modItem.C_ROUTE = itemInfo.C_ROUTE;
modItem.N_DIAMETER = itemInfo.N_DIAMETER;
modItem.C_XM_YQ = itemInfo.C_XM_YQ;
modItem.N_JRL_WD = itemInfo.N_JRL_WD;
modItem.N_JRL_SJ = itemInfo.N_JRL_SJ;
modItem.C_STL_GRD_SLAB = itemInfo.C_STL_GRD_SLAB;
modItem.C_STD_CODE_SLAB = itemInfo.C_STD_CODE_SLAB;
modItem.C_REMARK = itemInfo.C_REMARK;//换产线原因
modItem.C_REMARK1 = itemInfo.C_REMARK1;
modItem.C_REMARK2 = itemInfo.C_REMARK2;
modItem.C_REMARK3 = itemInfo.C_REMARK3;//换规格原因
modItem.C_REMARK4 = itemInfo.C_REMARK4;
modItem.C_REMARK5 = itemInfo.C_REMARK5;
#endregion
if (!dalTrpPlanRollItem.Add_Tran(modItem))
{
TransactionHelper.RollBack();
return("下发失败！");
}
itemInfo.N_STATUS = 2;
if (!dal.Update(itemInfo))
{
TransactionHelper.RollBack();
return("下发失败！");
}
TransactionHelper.Commit();
return(result);
}
catch
{
TransactionHelper.RollBack();
return("下发失败！");
}
}
/// <summary>
/// 下发轧钢计划
/// </summary>
/// <param name="strPlanID">计划主键</param>
/// <param name="i_Wgt">重量</param>
/// <param name="strTime">开始时间</param>
/// <param name="strRemark">备注</param>
/// <param name="strLineID">轧线ID</param>
/// <param name="strHGG">换规格原因</param>
/// <returns></returns>
public string DownPlan(string strPlanID, decimal i_Wgt, string strTime, string strRemark, string strLineID, string strHGG)
{
try
{
string result = "1";
TransactionHelper.BeginTransaction();
Dal_TB_STA dalTbSta = new Dal_TB_STA();
DateTime dtStart;
DateTime dtEnd;
Mod_TB_STA modSta = dalTbSta.GetModel(strLineID);
Mod_TRP_PLAN_ROLL modelPlan = dalTrpPlanRoll.GetModel(strPlanID);
if (modelPlan == null)
{
TransactionHelper.RollBack();
return("下发失败，没有找到计划信息！");
}
else
{
modelPlan.N_ISSUE_WGT = modelPlan.N_ISSUE_WGT + i_Wgt;
if (modelPlan.N_ISSUE_WGT == modelPlan.N_WGT)
{
modelPlan.N_STATUS = 1;
}
Mod_TRP_PLAN_ROLL_ITEM_INFO modUp = dal.GetModel_Up(strLineID);
if (modUp == null)
{
if (string.IsNullOrEmpty(strTime))
{
TransactionHelper.RollBack();
return("系统没有已排的计划，请设置计划初始开始时间！");
}
else
{
dtStart = Convert.ToDateTime(strTime);
}
}
else
{
//换规格
if (modelPlan.C_SPEC != modUp.C_SPEC)
{
if (string.IsNullOrEmpty(strHGG))
{
TransactionHelper.RollBack();
return("下发的计划和上一个计划规格不同，请填写换规格原因！");
}
}
int hggTime = dalChangeTime.Get_Time2(strLineID, modUp.C_SPEC, modelPlan.C_SPEC);//换规格时间
dtStart = Convert.ToDateTime(modUp.D_P_END_TIME).AddMinutes(hggTime);
if (!string.IsNullOrEmpty(strTime))
{
if (dtStart < Convert.ToDateTime(strTime))
{
dtStart = Convert.ToDateTime(strTime);
}
}
}
double cn = Convert.ToDouble(i_Wgt / Convert.ToDecimal(modelPlan.N_MACH_WGT.ToString()));
dtEnd = dtStart.AddHours(cn);//结束时间
#region TRP_PLAN_ROLL_ITEM赋值
Mod_TRP_PLAN_ROLL_ITEM_INFO modItemInfo = new Mod_TRP_PLAN_ROLL_ITEM_INFO();
modItemInfo.C_PLAN_ROLL_ID = modelPlan.C_ID; //计划主表主键
modItemInfo.N_STATUS = 1; //已下发
modItemInfo.C_INITIALIZE_ITEM_ID = modelPlan.C_INITIALIZE_ITEM_ID;
modItemInfo.C_ORDER_NO = modelPlan.C_ORDER_NO;
modItemInfo.N_WGT = i_Wgt;//下发量
modItemInfo.C_MAT_CODE = modelPlan.C_MAT_CODE;
modItemInfo.C_MAT_NAME = modelPlan.C_MAT_NAME;
modItemInfo.C_TECH_PROT = modelPlan.C_TECH_PROT;
modItemInfo.C_SPEC = modelPlan.C_SPEC;
modItemInfo.C_STL_GRD = modelPlan.C_STL_GRD;
modItemInfo.C_STD_CODE = modelPlan.C_STD_CODE;
modItemInfo.N_USER_LEV = modelPlan.N_USER_LEV;
modItemInfo.N_STL_GRD_LEV = modelPlan.N_STL_GRD_LEV;
modItemInfo.N_ORDER_LEV = modelPlan.N_ORDER_LEV;
modItemInfo.C_QUALIRY_LEV = modelPlan.C_QUALIRY_LEV;
modItemInfo.D_NEED_DT = modelPlan.D_NEED_DT;
modItemInfo.D_DELIVERY_DT = modelPlan.D_DELIVERY_DT;
modItemInfo.D_DT = modelPlan.D_DT;
modItemInfo.C_LINE_DESC = modSta.C_STA_DESC;
modItemInfo.C_LINE_CODE = modSta.C_STA_CODE;
modItemInfo.D_P_START_TIME = dtStart; //计划开始时间
modItemInfo.D_P_END_TIME = dtEnd; //计划结束时间
modItemInfo.N_PROD_TIME = modelPlan.N_PROD_TIME;
modItemInfo.N_SORT = modelPlan.N_SORT;
modItemInfo.N_ROLL_PROD_WGT = i_Wgt;//下发量
modItemInfo.C_ROLL_PROD_EMP_ID = modelPlan.C_ROLL_PROD_EMP_ID;
modItemInfo.C_STL_ROL_DT = modelPlan.C_STL_ROL_DT;
modItemInfo.N_PROD_WGT = modelPlan.N_PROD_WGT;
modItemInfo.N_WARE_WGT = modelPlan.N_WARE_WGT;
modItemInfo.N_WARE_OUT_WGT = modelPlan.N_WARE_OUT_WGT;
modItemInfo.N_FLAG = modelPlan.N_FLAG;
modItemInfo.N_ISSUE_WGT = i_Wgt;//下发量
modItemInfo.C_CUST_NO = modelPlan.C_CUST_NO;
modItemInfo.C_CUST_NAME = modelPlan.C_CUST_NAME;
modItemInfo.C_SALE_CHANNEL = modelPlan.C_SALE_CHANNEL;
modItemInfo.C_PACK = modelPlan.C_PACK;
modItemInfo.C_DESIGN_NO = modelPlan.C_DESIGN_NO;
modItemInfo.N_GROUP_WGT = modelPlan.N_GROUP_WGT;
modItemInfo.C_STA_ID = modSta.C_ID;
modItemInfo.D_START_TIME = modelPlan.D_START_TIME;
modItemInfo.D_END_TIME = modelPlan.D_END_TIME;
modItemInfo.C_EMP_ID = modelPlan.C_EMP_ID;
modItemInfo.D_MOD_DT = RV.UI.ServerTime.timeNow();
modItemInfo.N_ROLL_WGT = modelPlan.N_ROLL_WGT;
modItemInfo.N_MACH_WGT = modelPlan.N_MACH_WGT;
modItemInfo.C_CAST_NO = modelPlan.C_CAST_NO;
modItemInfo.C_INITIALIZE_ID = modelPlan.C_INITIALIZE_ID;
modItemInfo.C_FREE_TERM = modelPlan.C_FREE_TERM;
modItemInfo.C_FREE_TERM2 = modelPlan.C_FREE_TERM2;
modItemInfo.C_AREA = modelPlan.C_AREA;
modItemInfo.C_PCLX = modelPlan.C_PCLX;
modItemInfo.C_SFHL = modelPlan.C_SFHL;
modItemInfo.D_HL_START_TIME = modelPlan.D_HL_START_TIME;
modItemInfo.D_HL_END_TIME = modelPlan.D_HL_END_TIME;
modItemInfo.C_SFHL_D = modelPlan.C_SFHL_D;
modItemInfo.D_DHL_START_TIME = modelPlan.D_DHL_START_TIME;
modItemInfo.D_DHL_END_TIME = modelPlan.D_DHL_END_TIME;
modItemInfo.C_SFKP = modelPlan.C_SFKP;
modItemInfo.D_KP_START_TIME = modelPlan.D_KP_START_TIME;
modItemInfo.D_KP_END_TIME = modelPlan.D_KP_END_TIME;
modItemInfo.C_SFXM = modelPlan.C_SFXM;
modItemInfo.D_XM_START_TIME = modelPlan.D_XM_START_TIME;
modItemInfo.D_XM_END_TIME = modelPlan.D_XM_END_TIME;
modItemInfo.N_UPLOADSTATUS = modelPlan.N_UPLOADSTATUS;
modItemInfo.C_MATRL_CODE_SLAB = modelPlan.C_MATRL_CODE_KP.Trim() == "" ? modelPlan.C_MATRL_CODE_SLAB : modelPlan.C_MATRL_CODE_KP; //
modItemInfo.C_MATRL_NAME_SLAB = modelPlan.C_MATRL_CODE_KP.Trim() == "" ? modelPlan.C_MATRL_NAME_SLAB : modelPlan.C_MATRL_NAME_KP; //
modItemInfo.C_SLAB_SIZE = modelPlan.C_MATRL_CODE_KP.Trim() == "" ? modelPlan.C_SLAB_SIZE : modelPlan.C_KP_SIZE; //
modItemInfo.N_SLAB_LENGTH = modelPlan.C_MATRL_CODE_KP.Trim() == "" ? modelPlan.N_SLAB_LENGTH : modelPlan.N_KP_LENGTH; //
modItemInfo.N_SLAB_PW = modelPlan.C_MATRL_CODE_KP.Trim() == "" ? modelPlan.N_SLAB_PW : modelPlan.N_KP_PW; //
modItemInfo.D_CAN_ROLL_TIME = modelPlan.D_CAN_ROLL_TIME;
modItemInfo.C_ROUTE = modelPlan.C_ROUTE;
modItemInfo.N_DIAMETER = modelPlan.N_DIAMETER;
modItemInfo.C_XM_YQ = modelPlan.C_XM_YQ;
modItemInfo.N_JRL_WD = modelPlan.N_JRL_WD;
modItemInfo.N_JRL_SJ = modelPlan.N_JRL_SJ;
modItemInfo.C_STL_GRD_SLAB = modelPlan.C_STL_GRD_SLAB;
modItemInfo.C_STD_CODE_SLAB = modelPlan.C_STD_CODE_SLAB;
modItemInfo.C_REMARK = strRemark;//换产线原因
modItemInfo.C_REMARK1 = "0";
modItemInfo.C_REMARK2 = modelPlan.C_REMARK2;
modItemInfo.C_REMARK3 = strHGG;//换规格原因
modItemInfo.C_REMARK4 = modelPlan.C_REMARK4;
modItemInfo.C_REMARK5 = modelPlan.C_REMARK5;
#endregion
if (!dal.Add_Trans(modItemInfo))
{
TransactionHelper.RollBack();
return("下发失败！");
}
//modelPlan.D_P_START_TIME = dtStart;
//modelPlan.D_P_END_TIME = dtEnd;
if (!dalTrpPlanRoll.Update_Trans(modelPlan))
{
TransactionHelper.RollBack();
return("下发失败！");
}
}
TransactionHelper.Commit();
return(result);
}
catch
{
TransactionHelper.RollBack();
return("下发失败！");
}
}
/// <summary>
/// 下发轧钢计划（合并）
/// </summary>
/// <param name="strPlanID">计划实例</param>
/// <param name="i_Wgt">重量</param>
/// <returns></returns>
public string DownPlans(Mod_TRP_PLAN_ROLL_ITEM_INFO itemInfo, decimal i_Wgt, List <string> ids, string area)
{
try
{
string result = "1";
TransactionHelper.BeginTransaction();
Dal_TB_STA dalTbSta = new Dal_TB_STA();
DateTime dtStart;
DateTime dtEnd;
Mod_TB_STA modSta = dalTbSta.GetModel(itemInfo.C_STA_ID);
Mod_TRP_PLAN_ROLL_ITEM modUp = dalTrpPlanRollItem.GetModel_Up(itemInfo.C_STA_ID);
if (modUp == null)
{
if (string.IsNullOrEmpty(modUp.D_P_START_TIME.ToString()))
{
TransactionHelper.RollBack();
return("系统没有已排的计划，请设置计划初始开始时间！");
}
else
{
dtStart = Convert.ToDateTime(modUp.D_P_START_TIME.ToString());
}
}
else
{
int hggTime = dalChangeTime.Get_Time2(itemInfo.C_STA_ID, modUp.C_SPEC, itemInfo.C_SPEC);//换规格时间
dtStart = Convert.ToDateTime(modUp.D_P_END_TIME).AddMinutes(hggTime);
}
double cn = Convert.ToDouble(i_Wgt / Convert.ToDecimal(itemInfo.N_MACH_WGT.ToString()));
dtEnd = dtStart.AddHours(cn);//结束时间
#region TRP_PLAN_ROLL_ITEM赋值
Mod_TRP_PLAN_ROLL_ITEM modItem = new Mod_TRP_PLAN_ROLL_ITEM();
modItem.C_ID = DateTime.Now.ToString("yyyyMMddHHmmss") + new Random().Next(0, 1000);
//modItem.C_PLAN_ROLL_ID = itemInfo.C_ID;//计划主表主键
modItem.N_STATUS = 1;//已下发
modItem.C_INITIALIZE_ITEM_ID = itemInfo.C_INITIALIZE_ITEM_ID;
modItem.C_ORDER_NO = modItem.C_ID;
modItem.N_WGT = i_Wgt;//下发量
modItem.C_MAT_CODE = itemInfo.C_MAT_CODE;
modItem.C_MAT_NAME = itemInfo.C_MAT_NAME;
modItem.C_TECH_PROT = itemInfo.C_TECH_PROT;
modItem.C_SPEC = itemInfo.C_SPEC;
modItem.C_STL_GRD = itemInfo.C_STL_GRD;
modItem.C_STD_CODE = itemInfo.C_STD_CODE;
modItem.N_USER_LEV = itemInfo.N_USER_LEV;
modItem.N_STL_GRD_LEV = itemInfo.N_STL_GRD_LEV;
modItem.N_ORDER_LEV = itemInfo.N_ORDER_LEV;
modItem.C_QUALIRY_LEV = itemInfo.C_QUALIRY_LEV;
modItem.D_NEED_DT = itemInfo.D_NEED_DT;
modItem.D_DELIVERY_DT = itemInfo.D_DELIVERY_DT;
modItem.D_DT = itemInfo.D_DT;
modItem.C_LINE_DESC = modSta.C_STA_DESC;
modItem.C_LINE_CODE = modSta.C_STA_CODE;
modItem.D_P_START_TIME = dtStart; //计划开始时间
modItem.D_P_END_TIME = dtEnd; //计划结束时间
modItem.N_PROD_TIME = itemInfo.N_PROD_TIME;
modItem.N_SORT = itemInfo.N_SORT;
modItem.N_ROLL_PROD_WGT = i_Wgt;//下发量
modItem.C_ROLL_PROD_EMP_ID = itemInfo.C_ROLL_PROD_EMP_ID;
modItem.C_STL_ROL_DT = itemInfo.C_STL_ROL_DT;
modItem.N_PROD_WGT = itemInfo.N_PROD_WGT;
modItem.N_WARE_WGT = itemInfo.N_WARE_WGT;
modItem.N_WARE_OUT_WGT = itemInfo.N_WARE_OUT_WGT;
modItem.N_FLAG = itemInfo.N_FLAG;
modItem.N_ISSUE_WGT = i_Wgt;//下发量
//modItem.C_CUST_NO = itemInfo.C_CUST_NO;
//modItem.C_CUST_NAME = itemInfo.C_CUST_NAME;
modItem.C_SALE_CHANNEL = itemInfo.C_SALE_CHANNEL;
modItem.C_PACK = itemInfo.C_PACK;
modItem.C_DESIGN_NO = itemInfo.C_DESIGN_NO;
modItem.N_GROUP_WGT = itemInfo.N_GROUP_WGT;
modItem.C_STA_ID = modSta.C_ID;
modItem.D_START_TIME = itemInfo.D_START_TIME;
modItem.D_END_TIME = itemInfo.D_END_TIME;
modItem.C_EMP_ID = itemInfo.C_EMP_ID;
modItem.D_MOD_DT = RV.UI.ServerTime.timeNow();
modItem.N_ROLL_WGT = itemInfo.N_ROLL_WGT;
modItem.N_MACH_WGT = itemInfo.N_MACH_WGT;
modItem.C_CAST_NO = itemInfo.C_CAST_NO;
modItem.C_INITIALIZE_ID = itemInfo.C_INITIALIZE_ID;
modItem.C_FREE_TERM = itemInfo.C_FREE_TERM;
modItem.C_FREE_TERM2 = itemInfo.C_FREE_TERM2;
if (!string.IsNullOrWhiteSpace(area))
{
modItem.C_AREA = area;
}
modItem.C_PCLX = itemInfo.C_PCLX;
modItem.C_SFHL = itemInfo.C_SFHL;
modItem.D_HL_START_TIME = itemInfo.D_HL_START_TIME;
modItem.D_HL_END_TIME = itemInfo.D_HL_END_TIME;
modItem.C_SFHL_D = itemInfo.C_SFHL_D;
modItem.D_DHL_START_TIME = itemInfo.D_DHL_START_TIME;
modItem.D_DHL_END_TIME = itemInfo.D_DHL_END_TIME;
modItem.C_SFKP = itemInfo.C_SFKP;
modItem.D_KP_START_TIME = itemInfo.D_KP_START_TIME;
modItem.D_KP_END_TIME = itemInfo.D_KP_END_TIME;
modItem.C_SFXM = itemInfo.C_SFXM;
modItem.D_XM_START_TIME = itemInfo.D_XM_START_TIME;
modItem.D_XM_END_TIME = itemInfo.D_XM_END_TIME;
modItem.N_UPLOADSTATUS = itemInfo.N_UPLOADSTATUS;
modItem.C_MATRL_CODE_SLAB = itemInfo.C_MATRL_CODE_SLAB;
modItem.C_MATRL_NAME_SLAB = itemInfo.C_MATRL_NAME_SLAB;
modItem.C_SLAB_SIZE = itemInfo.C_SLAB_SIZE;
modItem.N_SLAB_LENGTH = itemInfo.N_SLAB_LENGTH;
modItem.N_SLAB_PW = itemInfo.N_SLAB_PW;
modItem.D_CAN_ROLL_TIME = itemInfo.D_CAN_ROLL_TIME;
modItem.C_ROUTE = itemInfo.C_ROUTE;
modItem.N_DIAMETER = itemInfo.N_DIAMETER;
modItem.C_XM_YQ = itemInfo.C_XM_YQ;
modItem.N_JRL_WD = itemInfo.N_JRL_WD;
modItem.N_JRL_SJ = itemInfo.N_JRL_SJ;
modItem.C_STL_GRD_SLAB = itemInfo.C_STL_GRD_SLAB;
modItem.C_STD_CODE_SLAB = itemInfo.C_STD_CODE_SLAB;
modItem.C_REMARK = itemInfo.C_REMARK;//换产线原因
//modItem.C_REMARK1 = itemInfo.C_REMARK1;
modItem.C_REMARK2 = itemInfo.C_REMARK2;
modItem.C_REMARK3 = itemInfo.C_REMARK3;//换规格原因
modItem.C_REMARK4 = itemInfo.C_REMARK4;
modItem.C_REMARK5 = itemInfo.C_REMARK5;
modItem.N_IS_MERGE = 1;
#endregion
if (!dalTrpPlanRollItem.Add_Tran(modItem))
{
TransactionHelper.RollBack();
return("下发失败！");
}
if (ids.Count > 1)
{
foreach (var id in ids)
{
var m = dal.GetModel(id);
m.C_ITEM_ID = modItem.C_ID;
m.N_STATUS = 3;
dal.Update(m);
}
}
//if (!dalTrpPlanRoll.Update_Trans(modelPlan))
//{
// TransactionHelper.RollBack();
// return "下发失败！";
//}
TransactionHelper.Commit();
if (ids.Count > 1)
{
Dal_TRP_PLAN_ROLL_ITEM_INFO_LOG dalLog = new Dal_TRP_PLAN_ROLL_ITEM_INFO_LOG();
foreach (var id in ids)
{
{
var m = dal.GetModel(id);
Mod_TRP_PLAN_ROLL_ITEM_INFO_LOG log = new Mod_TRP_PLAN_ROLL_ITEM_INFO_LOG();
log.C_ID = m.C_ID;
log.C_PLAN_ROLL_ID = m.C_PLAN_ROLL_ID;
log.C_MAT_CODE = m.C_MAT_CODE;
log.C_MAT_NAME = m.C_MAT_NAME;
log.C_SPEC = m.C_SPEC;
log.C_STL_GRD = m.C_STL_GRD;
log.C_STD_CODE = m.C_STD_CODE;
log.C_MAT_NAME = m.C_MATRL_CODE_SLAB;
log.C_MATRL_NAME_SLAB = m.C_MATRL_NAME_SLAB;
log.C_SLAB_SIZE = m.C_SLAB_SIZE;
log.N_SLAB_LENGTH = m.N_SLAB_LENGTH;
log.N_SLAB_PW = m.N_SLAB_PW;
log.C_LINE_DESC = m.C_LINE_DESC;
log.C_LINE_CODE = m.C_LINE_CODE;
log.N_ISSUE_WGT = m.N_ISSUE_WGT;
log.C_ITEM_ID = m.C_ITEM_ID;
dalLog.Add(log);
}
}
}
return(result);
}
catch
{
TransactionHelper.RollBack();
return("下发失败！");
}
}
