public void SetUpBase()
{
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
adapterDotSpatial = new CrsTransformationAdapterDotSpatial();
adapterProjNet = new CrsTransformationAdapterProjNet();
adapterMightyLittleGeodesy = new CrsTransformationAdapterMightyLittleGeodesy();
allAdapters = new List <ICrsTransformationAdapter> {
// Regarding the order of the items in the list below:
// DotSpatial should be the first since it is assumed in the test by the subclass CompositeStrategyFirstSuccessTest
adapterDotSpatial,
adapterProjNet,
adapterMightyLittleGeodesy
};
wgs84coordinate = CrsCoordinateFactory.CreateFromYNorthingLatitudeAndXEastingLongitude(wgs84Lat, wgs84Lon, EpsgNumber.WORLD__WGS_84__4326);
resultCoordinateDotSpatial = adapterDotSpatial.TransformToCoordinate(wgs84coordinate, EpsgNumber.SWEDEN__SWEREF99_TM__3006);
resultCoordinateProjNet = adapterProjNet.TransformToCoordinate(wgs84coordinate, EpsgNumber.SWEDEN__SWEREF99_TM__3006);
resultCoordinateMightyLittleGeodesy = adapterMightyLittleGeodesy.TransformToCoordinate(wgs84coordinate, EpsgNumber.SWEDEN__SWEREF99_TM__3006);
allCoordinateResultsForTheDifferentImplementations = new List <CrsCoordinate> {
resultCoordinateDotSpatial,
resultCoordinateMightyLittleGeodesy,
resultCoordinateProjNet
};
}
public void SetUp() {
weightFactory = CrsTransformationAdapterWeightFactory.Create();
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
crsTransformationAdapterLeafImplementations = new List<ICrsTransformationAdapter>{
new CrsTransformationAdapterDotSpatial(),
new CrsTransformationAdapterProjNet(),
new CrsTransformationAdapterMightyLittleGeodesy()
};
crsTransformationAdapterCompositeImplementations = new List<ICrsTransformationAdapter>{
crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage(),
crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian(),
crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess(),
crsTransformationAdapterCompositeFactory.CreateCrsTransformationWeightedAverage(new List<CrsTransformationAdapterWeight>{
weightFactory.CreateFromInstance(new CrsTransformationAdapterDotSpatial(), 51.0),
weightFactory.CreateFromInstance(new CrsTransformationAdapterProjNet(), 52.0),
weightFactory.CreateFromInstance(new CrsTransformationAdapterMightyLittleGeodesy(), 53.0)
})
};
crsTransformationAdapterImplementations = new List<ICrsTransformationAdapter>();
crsTransformationAdapterImplementations.AddRange(crsTransformationAdapterLeafImplementations);
crsTransformationAdapterImplementations.AddRange(crsTransformationAdapterCompositeImplementations);
}
public void method()
{
Console.WriteLine("SmallCSharpeExample starts");
int epsgWgs84 = 4326;
int epsgSweRef = 3006;
// alternative to the above two hardcodings: use the library "Programmerare.CrsTransformations.Constants"
// and constants EpsgNumber.WORLD__WGS_84__4326 and EpsgNumber.SWEDEN__SWEREF99_TM__3006
// from the class Programmerare.CrsConstants.ConstantsByAreaNameNumber.v9_7.EpsgNumber
CrsCoordinate centralStockholmWgs84 = CrsCoordinateFactory.LatLon(59.330231, 18.059196, epsgWgs84);
ICrsTransformationAdapter crsTransformationAdapter = CrsTransformationAdapterCompositeFactory.Create().CreateCrsTransformationMedian();
// If the NuGet configuration includes all (currently three) adapter implementations, then the
// above created 'Composite' implementation will below use all three 'leaf' implementations
// and return a coordinate with a median longitude and a median latitude
CrsTransformationResult centralStockholmResultSweRef = crsTransformationAdapter.Transform(centralStockholmWgs84, epsgSweRef);
if (centralStockholmResultSweRef.IsSuccess)
{
Console.WriteLine(centralStockholmResultSweRef.OutputCoordinate);
// Console output from the above code row:
// CrsCoordinate(xEastingLongitude=674032.357177155, yNorthingLatitude=6580821.99121561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
}
Console.WriteLine("SmallCSharpeExample ends");
Console.ReadLine();
}
public void CompositeAdapters_ShouldNotBeEqual_WhenDifferentNumberOfLeafs()
{
// Composite adapter factory with only two leafs:
var crsTransformationAdapterCompositeFactoryWithTwoLeafs = CrsTransformationAdapterCompositeFactory.Create(
new List <ICrsTransformationAdapter> {
dotSpatial, projNet
}
);
var crsTransformationAdapterCompositeFactoryWithThreeLeafs = crsTransformationAdapterCompositeFactory;
// Average created with two differenf factories,
// one with three leafs and one with two leafs
Assert.AreNotEqual(
crsTransformationAdapterCompositeFactoryWithThreeLeafs.CreateCrsTransformationAverage(),
crsTransformationAdapterCompositeFactoryWithTwoLeafs.CreateCrsTransformationAverage()
);
// Median created with two differenf factories,
// one with three leafs and one with two leafs
Assert.AreNotEqual(
crsTransformationAdapterCompositeFactoryWithThreeLeafs.CreateCrsTransformationMedian(),
crsTransformationAdapterCompositeFactoryWithTwoLeafs.CreateCrsTransformationMedian()
);
// FirstSuccess created with two differenf factories,
// one with three leafs and one with two leafs
Assert.AreNotEqual(
crsTransformationAdapterCompositeFactoryWithThreeLeafs.CreateCrsTransformationFirstSuccess(),
crsTransformationAdapterCompositeFactoryWithTwoLeafs.CreateCrsTransformationFirstSuccess()
);
}
public void SetUp() {
weightFactory = CrsTransformationAdapterWeightFactory.Create();
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
var dotSpatial = new CrsTransformationAdapterDotSpatial();
var ProjNet = new CrsTransformationAdapterProjNet();
var mightyLittleGeodesy = new CrsTransformationAdapterMightyLittleGeodesy();
listOfAdaptersWithOneDuplicated = new List<ICrsTransformationAdapter>{
dotSpatial,
ProjNet,
mightyLittleGeodesy,
// Duplicate added below !
new CrsTransformationAdapterDotSpatial()
};
listOfTwoAdaptersWithoutDotSpatial = new List<ICrsTransformationAdapter>{
ProjNet,
mightyLittleGeodesy
};
listOfWeightsWithOneDuplicated = new List<CrsTransformationAdapterWeight>{
weightFactory.CreateFromInstance(dotSpatial, 1.0),
weightFactory.CreateFromInstance(ProjNet, 2.0),
weightFactory.CreateFromInstance(mightyLittleGeodesy, 3.0),
// Duplicate added below !
// (Duplicate regarding the class, the weight value is not relevant)
weightFactory.CreateFromInstance(dotSpatial, 4.0)
};
CrsTransformationAdapterLeafFactory leafFactoryOnlyCreatingDotSpatialImplementationAsDefault = CrsTransformationAdapterLeafFactory.Create(new List<ICrsTransformationAdapter>{dotSpatial});
compositeFactoryConfiguredWithLeafFactoryOnlyCreatingDotSpatialImplementationAsDefault = CrsTransformationAdapterCompositeFactory.Create(leafFactoryOnlyCreatingDotSpatialImplementationAsDefault);
}
private void crsTransformationAdapterCode()
{
// The three (currently) 'Leaf' adapters:
crsTransformationAdapter = new CrsTransformationAdapterDotSpatial();
crsTransformationAdapter = new CrsTransformationAdapterProjNet();
crsTransformationAdapter = new CrsTransformationAdapterMightyLittleGeodesy();
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
// Three factory methods for 'composite' adapters
// (trying to create them all with reflection, and thus no parameter)
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess();
// a list used as parameter for the below 'Composite' adapters:
IList <ICrsTransformationAdapter> crsTransformationAdapters = new List <ICrsTransformationAdapter> {
crsTransformationAdapter
};
// Three factory methods for 'composite' adapters
// (with the specified leaf adapters in a list parameter)
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create(crsTransformationAdapters);
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess();
// leaf adapters (used below for creating a composite with weighted average):
var crsTransformationAdapterDotSpatial = new CrsTransformationAdapterDotSpatial();
var crsTransformationAdapterProjNet = new CrsTransformationAdapterProjNet();
// One of the above are used below, with the instance,
// and one of them is instead below using the class name created here:
string fullClassNameForImplementation = crsTransformationAdapterDotSpatial.GetType().FullName;
// Now creating the composite with weighted average, using the above two
// leaf adapters, using two different create methods:
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationWeightedAverage(new List <CrsTransformationAdapterWeight> {
CrsTransformationAdapterWeightFactory.Create().CreateFromInstance(crsTransformationAdapterProjNet, 1.0),
CrsTransformationAdapterWeightFactory.Create().CreateFromStringWithFullClassNameForImplementation(fullClassNameForImplementation, 2.0)
});
// public properties
crsTransformationAdapteeType = crsTransformationAdapter.AdapteeType;
isComposite = crsTransformationAdapter.IsComposite;
longNameOfImplementation = crsTransformationAdapter.LongNameOfImplementation;
shortNameOfImplementation = crsTransformationAdapter.ShortNameOfImplementation;
// public methods:
transformationAdapterChildren = crsTransformationAdapter.TransformationAdapterChildren;
crsTransformationResult = crsTransformationAdapter.Transform(crsCoordinate, crsIdentifier);
crsTransformationResult = crsTransformationAdapter.Transform(crsCoordinate, epsgNumber);
crsTransformationResult = crsTransformationAdapter.Transform(crsCoordinate, crsCode);
crsCoordinate = crsTransformationAdapter.TransformToCoordinate(crsCoordinate, crsIdentifier);
crsCoordinate = crsTransformationAdapter.TransformToCoordinate(crsCoordinate, epsgNumber);
crsCoordinate = crsTransformationAdapter.TransformToCoordinate(crsCoordinate, crsCode);
}
public void AdapterCompositeFactory_ShouldNotFail_WhenNotAllAdaptersAreAvailable()
{
var factory = CrsTransformationAdapterCompositeFactory.Create();
var median = factory.CreateCrsTransformationMedian();
var coord = CrsCoordinateFactory.LatLon(60.0, 20.0);
var result = median.Transform(coord, 3006);
Assert.IsTrue(result.IsSuccess);
IList <CrsTransformationResult> childrenResults = result.TransformationResultChildren;
Assert.AreEqual(
NUMBER_OF_ADAPTERS_WHICH_ARE_DEPENDENCIES_FROM_THIS_PROJECT,
childrenResults.Count
);
var outputCoord = result.OutputCoordinate;
}
public void SetUpBase() {
// The setup code below creates four coordinates
// representing results from four implementations.
double lat1 = 59.330231;
double lat2 = 59.330232;
double lat3 = 59.330233;
double lat4 = 59.330239;
double latMean = (lat2 + lat3 ) / 2;
double latAverage = (lat1 + lat2 + lat3 + lat4) / 4;
expectedLatDiffMax = lat4-lat1;
double lon1 = 18.059192;
double lon2 = 18.059193;
double lon3 = 18.059194;
double lon4 = 18.059198;
double lonMean = (lon2 + lon3 ) / 2;
double lonAverage = (lon1 + lon2 + lon3 + lon4) / 4;
expectedLonDiffMax = lon4-lon1;
expectedCoordinateMean = CrsCoordinateFactory.LatLon(latMean, lonMean);
expectedCoordinateAverage = CrsCoordinateFactory.LatLon(latAverage, lonAverage);
CrsCoordinate outputCoordinate1 = CrsCoordinateFactory.LatLon(lat1, lon1);
CrsCoordinate outputCoordinate2 = CrsCoordinateFactory.LatLon(lat2, lon2);
CrsCoordinate outputCoordinate3 = CrsCoordinateFactory.LatLon(lat3, lon3);
CrsCoordinate outputCoordinate4 = CrsCoordinateFactory.LatLon(lat4, lon4);
var crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
compositeAdapterForResultTest = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
inputCoordinateNotUsedInStatisticsTest = CrsCoordinateFactory.LatLon(0.0, 0.0); // input, not used here in this test
outputCoordinateNotUsedInStatisticsTest = inputCoordinateNotUsedInStatisticsTest;
ICrsTransformationAdapter leafAdapterForResultTest = new CrsTransformationAdapterDotSpatial();
// Can use the same above adapter for all parts below. Not used much except that the object must be some leaf
listOfSubresultsForStatisticsTest = new List<CrsTransformationResult>{
CreateCrsTransformationResult(outputCoordinate1, leafAdapterForResultTest, inputCoordinateNotUsedInStatisticsTest),
CreateCrsTransformationResult(outputCoordinate2, leafAdapterForResultTest, inputCoordinateNotUsedInStatisticsTest),
CreateCrsTransformationResult(outputCoordinate3, leafAdapterForResultTest, inputCoordinateNotUsedInStatisticsTest),
CreateCrsTransformationResult(outputCoordinate4, leafAdapterForResultTest, inputCoordinateNotUsedInStatisticsTest)
};
}
public void SetUp()
{
weightFactory = CrsTransformationAdapterWeightFactory.Create();
// Leaf adapters:
dotSpatial = new CrsTransformationAdapterDotSpatial();
mightyLittleGeodesy = new CrsTransformationAdapterMightyLittleGeodesy();
// currently there are no configurations possibilities for the above two leafs
// but for the below leaf it is possible to create instances with
// different configurations
projNet = new CrsTransformationAdapterProjNet();
ProjNetWithDifferentConfiguration = new CrsTransformationAdapterProjNet(new SridReader("somepath.csv"));
// Composite adapters:
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create(
new List <ICrsTransformationAdapter> {
dotSpatial, mightyLittleGeodesy, projNet
}
);
// Note that below list parameter is the same as the above but with the list items in reversed order
crsTransformationAdapterCompositeFactoryWithLeafsInReversedOrder = CrsTransformationAdapterCompositeFactory.Create(
new List <ICrsTransformationAdapter> {
projNet, mightyLittleGeodesy, dotSpatial
}
);
crsTransformationAdapterCompositeFactoryWithOneLeafDifferentlyConfigured = CrsTransformationAdapterCompositeFactory.Create(
new List <ICrsTransformationAdapter> {
dotSpatial, mightyLittleGeodesy, ProjNetWithDifferentConfiguration
}
);
average = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
median = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
firstSuccess = crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess();
weightedAverage = crsTransformationAdapterCompositeFactory.CreateCrsTransformationWeightedAverage(new List <CrsTransformationAdapterWeight> {
weightFactory.CreateFromInstance(dotSpatial, 1.0),
weightFactory.CreateFromInstance(projNet, 2.0),
weightFactory.CreateFromInstance(mightyLittleGeodesy, 3.0)
});
}
public void IsReliableTest()
{
var crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
CrsTransformationAdapterComposite crsTransformationComposite = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
var children = crsTransformationComposite.TransformationAdapterChildren;
Assert.AreEqual(3, children.Count);
CrsCoordinate wgs84coordinateInSweden = CrsCoordinateFactory.LatLon(59.31, 18.04);
CrsTransformationResult resultWhenTransformingToSwedishCRS = crsTransformationComposite.Transform(wgs84coordinateInSweden, EpsgNumber.SWEDEN__SWEREF99_TM__3006);
Assert.IsNotNull(resultWhenTransformingToSwedishCRS);
Assert.IsTrue(resultWhenTransformingToSwedishCRS.IsSuccess);
CrsTransformationResultStatistic crsTransformationResultStatistic = resultWhenTransformingToSwedishCRS.CrsTransformationResultStatistic;
Assert.IsNotNull(crsTransformationResultStatistic);
Assert.IsTrue(crsTransformationResultStatistic.IsStatisticsAvailable);
int actualNumberOfResults = crsTransformationResultStatistic.NumberOfPotentiallySuccesfulResults;
Assert.AreEqual(
EXPECTED_NUMBER_OF_ADAPTER_LEAF_IMPLEMENTATIONS,
actualNumberOfResults
);
double actualMaxDiffXLongitude = crsTransformationResultStatistic.MaxDifferenceForXEastingLongitude;
double actualMaxDiffYLatitude = crsTransformationResultStatistic.MaxDifferenceForYNorthingLatitude;
double actualMaxDiffXorY = Math.Max(actualMaxDiffXLongitude, actualMaxDiffYLatitude);
Assert.That(actualMaxDiffXorY, Is.LessThan(0.01));
Assert.IsTrue(resultWhenTransformingToSwedishCRS.IsReliable(actualNumberOfResults, actualMaxDiffXorY));
// assertFalse below since trying to require one more result than available
Assert.IsFalse(resultWhenTransformingToSwedishCRS.IsReliable(actualNumberOfResults + 1, actualMaxDiffXorY));
// assertFalse below since trying to require too small maxdiff
Assert.IsFalse(resultWhenTransformingToSwedishCRS.IsReliable(actualNumberOfResults, actualMaxDiffXorY - 0.00000000001));
}
public void SetUp()
{
weightFactory = CrsTransformationAdapterWeightFactory.Create();
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
double[] outputLatitudes =
{
59.1,
59.2,
59.3,
59.4,
59.6,
};
expectedMedianLatitude = 59.3;
expectedAverageLatitude = 59.32;
double[] outputLongitudes =
{
18.2,
18.3,
18.4,
18.8,
18.9
};
expectedMedianLongitude = 18.4;
expectedAverageLongitude = 18.52;
outputCoordinateWgs84ForImplementation_1 = CrsCoordinateFactory.CreateFromLatitudeLongitude(outputLatitudes[0], outputLongitudes[3]);
outputCoordinateWgs84ForImplementation_2 = CrsCoordinateFactory.CreateFromLatitudeLongitude(outputLatitudes[2], outputLongitudes[1]);
outputCoordinateWgs84ForImplementation_3 = CrsCoordinateFactory.CreateFromLatitudeLongitude(outputLatitudes[4], outputLongitudes[4]);
outputCoordinateWgs84ForImplementation_4 = CrsCoordinateFactory.CreateFromLatitudeLongitude(outputLatitudes[1], outputLongitudes[0]);
outputCoordinateWgs84ForImplementation_5 = CrsCoordinateFactory.CreateFromLatitudeLongitude(outputLatitudes[3], outputLongitudes[2]);
outputCoordinates = new List <CrsCoordinate> {
outputCoordinateWgs84ForImplementation_1,
outputCoordinateWgs84ForImplementation_2,
outputCoordinateWgs84ForImplementation_3,
outputCoordinateWgs84ForImplementation_4,
outputCoordinateWgs84ForImplementation_5
};
mock1 = new Mock <ICrsTransformationAdapter>();
mock2 = new Mock <ICrsTransformationAdapter>();
mock3 = new Mock <ICrsTransformationAdapter>();
mock4 = new Mock <ICrsTransformationAdapter>();
mock5 = new Mock <ICrsTransformationAdapter>();
leafAdapterImplementation_1 = mock1.Object;
leafAdapterImplementation_2 = mock2.Object;
leafAdapterImplementation_3 = mock3.Object;
leafAdapterImplementation_4 = mock4.Object;
leafAdapterImplementation_5 = mock5.Object;
inputCoordinateSweref99 = CrsCoordinateFactory.CreateFromYNorthingLatitudeAndXEastingLongitude(6580822.0, 674032.0, EpsgNumber.SWEDEN__SWEREF99_TM__3006);
CrsTransformationResult leafResult1 = CrsTransformationResult._CreateCrsTransformationResult(
inputCoordinateSweref99,
outputCoordinateWgs84ForImplementation_1,
null,
true,
leafAdapterImplementation_1,
CrsTransformationResultStatistic._CreateCrsTransformationResultStatistic(new List <CrsTransformationResult>())
);
CrsTransformationResult leafResult2 = CrsTransformationResult._CreateCrsTransformationResult(
inputCoordinateSweref99,
outputCoordinateWgs84ForImplementation_2,
null,
true,
leafAdapterImplementation_2,
CrsTransformationResultStatistic._CreateCrsTransformationResultStatistic(new List <CrsTransformationResult>())
);
CrsTransformationResult leafResult3 = CrsTransformationResult._CreateCrsTransformationResult(
inputCoordinateSweref99,
outputCoordinateWgs84ForImplementation_3,
null,
true,
leafAdapterImplementation_3,
CrsTransformationResultStatistic._CreateCrsTransformationResultStatistic(new List <CrsTransformationResult>())
);
CrsTransformationResult leafResult4 = CrsTransformationResult._CreateCrsTransformationResult(
inputCoordinateSweref99,
outputCoordinateWgs84ForImplementation_4,
null,
true,
leafAdapterImplementation_4,
CrsTransformationResultStatistic._CreateCrsTransformationResultStatistic(new List <CrsTransformationResult>())
);
CrsTransformationResult leafResult5 = CrsTransformationResult._CreateCrsTransformationResult(
inputCoordinateSweref99,
outputCoordinateWgs84ForImplementation_5,
null,
true,
leafAdapterImplementation_5,
CrsTransformationResultStatistic._CreateCrsTransformationResultStatistic(new List <CrsTransformationResult>())
);
crsIdentifierWGS84 = CrsIdentifierFactory.CreateFromEpsgNumber(EpsgNumber.WORLD__WGS_84__4326);
mock1.Setup(leaf => leaf.Transform(inputCoordinateSweref99, crsIdentifierWGS84)).Returns(leafResult1);
mock2.Setup(leaf => leaf.Transform(inputCoordinateSweref99, crsIdentifierWGS84)).Returns(leafResult2);
mock3.Setup(leaf => leaf.Transform(inputCoordinateSweref99, crsIdentifierWGS84)).Returns(leafResult3);
mock4.Setup(leaf => leaf.Transform(inputCoordinateSweref99, crsIdentifierWGS84)).Returns(leafResult4);
mock5.Setup(leaf => leaf.Transform(inputCoordinateSweref99, crsIdentifierWGS84)).Returns(leafResult5);
//mock1.Setup(leaf => leaf.LongNameOfImplementation).Returns("1");
//mock2.Setup(leaf => leaf.LongNameOfImplementation).Returns("2");
//mock3.Setup(leaf => leaf.LongNameOfImplementation).Returns("3");
//mock4.Setup(leaf => leaf.LongNameOfImplementation).Returns("4");
//mock5.Setup(leaf => leaf.LongNameOfImplementation).Returns("5");
mock1.Setup(leaf => leaf.AdapteeType).Returns(CrsTransformationAdapteeType.LEAF_DOT_SPATIAL_2_0_0_RC1);
mock2.Setup(leaf => leaf.AdapteeType).Returns(CrsTransformationAdapteeType.LEAF_PROJ_NET_2_0_0);
mock3.Setup(leaf => leaf.AdapteeType).Returns(CrsTransformationAdapteeType.LEAF_MIGHTY_LITTLE_GEODESY_1_0_2);
// The type must be different but there are only three concrete types as above to use
// but then instead can use the ones below (and the purpose of this enum is to use it as key in a dictionary/hashtable)
mock4.Setup(leaf => leaf.AdapteeType).Returns(CrsTransformationAdapteeType.UNSPECIFIED_LEAF);
mock5.Setup(leaf => leaf.AdapteeType).Returns(CrsTransformationAdapteeType.UNSPECIFIED);
allLeafAdapters = new List <ICrsTransformationAdapter> {
leafAdapterImplementation_1,
leafAdapterImplementation_2,
leafAdapterImplementation_3,
leafAdapterImplementation_4,
leafAdapterImplementation_5
};
}
public void method() {
Console.WriteLine("LargerCSharpeExample starts");
// Some terminology regarding the names used in the below code example:
// "CRS" = Coordinate Reference System
// "WGS84" is the most frequently used coordinate system (e.g. the coordinates usually used in a GPS)
// "SWEREF99TM" is the official coordinate system used by authorities in Sweden
// "EPSG" = "European Petroleum Survey Group" was (but the EPSG name is still often used)
// an organization defining CRS with integer numbers e.g. 4326 for WGS84 or 3006 for SWEREF99TM
int epsgWgs84 = EpsgNumber.WORLD__WGS_84__4326;
int epsgSweRef = EpsgNumber.SWEDEN__SWEREF99_TM__3006;
// The above "EpsgNumber" class with LOTS OF constants (and more constants classes) have been generated,
// using "FreeMarker" and database downloaded from EPSG ( http://www.epsg.org or http://www.epsg-registry.org )
// from "crs-transformation-code-generation" in the project https://github.com/TomasJohansson/crsTransformations
CrsCoordinate centralStockholmWgs84 = CrsCoordinateFactory.LatLon(59.330231, 18.059196, epsgWgs84);
// https://kartor.eniro.se/m/03Yxp
// SWEREF99TM coordinates (for WGS84 59.330231, 18.059196)
// according to Eniro (above URL): 6580822, 674032 (northing, easting)
ICrsTransformationAdapter crsTransformationAdapter; // interface with concrete "leaf" implementation or "composite" implementations
// This code example is using a "composite" which will use multiple libraries to do the same transformation and then
// return a coordinate with the median values (median of the northing values and median of the easting values)
crsTransformationAdapter = CrsTransformationAdapterCompositeFactory.Create().CreateCrsTransformationMedian();
// The above factory will try to use those known objects which implements the interface i.e. the number
// of "leaf" objects will depend on how many you included as for example NuGet dependencies (three in the above NuGet example)
Console.WriteLine("Number of 'leafs' : " + crsTransformationAdapter.TransformationAdapterChildren.Count);
// Console output from the above row:
// Number of 'leafs' : 3
// Transform the WGS84 coordinate to a SWEREF99TM coordinate:
CrsCoordinate centralStockholmSweRef = crsTransformationAdapter.TransformToCoordinate(centralStockholmWgs84, epsgSweRef);
Console.WriteLine("Median Composite Northing: " + centralStockholmSweRef.Northing);
Console.WriteLine("Median Composite Easting: " + centralStockholmSweRef.Easting);
// Console output from the above two rows:
// Median Composite Northing: 6580821.99121561
// Median Composite Easting: 674032.357177155
// (and these can be compared with the 'Eniro' values above i.e. '6580822, 674032 (northing, easting)' )
// The coordinate class provides four properties with different names for the same east-west value and
// four properties for the same name each north-south value, as below:
// Four EQUIVALENT properties: Easting , X , Longitude , XEastingLongitude
// Four EQUIVALENT properties: Northing , Y , Latitude , YNorthingLatitude
// Regarding the above alternative methods, depending on the desired semantic in your context, you may want to use:
// X/Y for a geocentric or cartesian system
// Longitude/Latitude for a geodetic or geographic system
// Easting/Northing for a cartographic or projected system
// xEastingLongitude/yNorthingLatitude for general code handling different types of system
// If you want more details for the result you can use the following 'Transform' method:
// (instead of the method 'TransformToCoordinate' used above)
CrsTransformationResult centralStockholmResultSweRef = crsTransformationAdapter.Transform(centralStockholmWgs84, epsgSweRef);
if(!centralStockholmResultSweRef.IsSuccess) {
Console.WriteLine("No coordinate result");
}
else {
if(centralStockholmResultSweRef.IsReliable(
2, // minimumNumberOfSuccesfulResults
0.01 // maxDeltaValueForXLongitudeAndYLatitude
)) {
// at least 2 succesful results and the maximal difference in northing or easting is less than 0.01
// (and if you want to know the exact difference you can find it in this code example further down the page)
Console.WriteLine("Reliable result"); // according to your chosen parameters to the method 'isReliable'
}
else {
Console.WriteLine("Not reliable result");
}
Console.WriteLine(centralStockholmResultSweRef.OutputCoordinate);
// Console output from the above code row:
// CrsCoordinate(xEastingLongitude=674032.357177155, yNorthingLatitude=6580821.99121561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
// When your code is in a context where you only have the result (but not the adapter object)
// (e.g. in a method receiving the result as a parameter)
// you can get back the object which created the result as below:
ICrsTransformationAdapter crsTransformationAdapterResultSource = centralStockholmResultSweRef.CrsTransformationAdapterResultSource;
CrsTransformationAdapteeType adapteeType = crsTransformationAdapterResultSource.AdapteeType;
Console.WriteLine("adapteeType: " + adapteeType); // console output: COMPOSITE_MEDIAN
// The above code row returned an enum which is not really a true adaptee just like the 'composite' is not a true adapter.
// However, when iterating (as below) the "leaf" results,
// it might be more interesting to keep track of from where the different values originated
IList<CrsTransformationResult> transformationResultChildren = centralStockholmResultSweRef.TransformationResultChildren;
foreach (CrsTransformationResult crsTransformationResultLeaf in transformationResultChildren) {
if(!crsTransformationResultLeaf.IsSuccess) continue; // continue with the next 'leaf'
ICrsTransformationAdapter resultAdapter = crsTransformationResultLeaf.CrsTransformationAdapterResultSource;
Console.WriteLine(resultAdapter.AdapteeType);
// The above code row will output rows like this:
// "LEAF_PROJ_NET_4_GEO_API_1_4_1" or "LEAF_MIGHTY_LITTLE_GEODESY_1_0_1" and so on
if(!crsTransformationResultLeaf.IsReliable(
2, // minimumNumberOfSuccesfulResults
1000 // maxDeltaValueForXLongitudeAndYLatitude
)) {
// The above constraint "at least 2 implementations" will always fail because now we are dealing with "leafs"
// The above delta value constraint has very high tolerance but it does not matter since
// the constraint about the number of implementations will fail
Console.WriteLine("Only 'composites' can have more than one result and this is a 'leaf' and thus does not have at least two results");
}
Console.WriteLine("Adapter long name: " + resultAdapter.LongNameOfImplementation); // full class name including package
Console.WriteLine("Adapter short name: " + resultAdapter.ShortNameOfImplementation); // class name suffix i.e. the unique part
// The above "long" names will be for example:
// Programmerare.CrsTransformations.Adapter.DotSpatial.CrsTransformationAdapterDotSpatial
// Programmerare.CrsTransformations.Adapter.MightyLittleGeodesy.CrsTransformationAdapterMightyLittleGeodesy
// The above "short" names will be for example:
// DotSpatial
// MightyLittleGeodesy
Console.WriteLine("adaptee: " + resultAdapter.AdapteeType);
// The above row will output for example:
// LEAF_DOT_SPATIAL_2_0_0_RC1
// LEAF_MIGHTY_LITTLE_GEODESY_1_0_1
// (note that the version number is included for the adaptees)
Console.WriteLine("isComposite: " + resultAdapter.IsComposite); // "False" since we are iterating "leaf" results
Console.WriteLine("Coordinate result for " + resultAdapter.AdapteeType + " : " + crsTransformationResultLeaf.OutputCoordinate);
// The above row will output these rows when doing the iteration:
// Coordinate result for LEAF_DOT_SPATIAL_2_0_0_RC1 : CrsCoordinate(xEastingLongitude=674032.357322213, yNorthingLatitude=6580821.99121561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
// Coordinate result for LEAF_PROJ_NET_4_GEO_API_1_4_1 : CrsCoordinate(xEastingLongitude=674032.357177155, yNorthingLatitude=6580821.99437121, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
// Coordinate result for LEAF_MIGHTY_LITTLE_GEODESY_1_0_1 : CrsCoordinate(xEastingLongitude=674032.357, yNorthingLatitude=6580821.991, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
// Note that the median value for "x" is 674032.357177155 for the above
// three values 674032.357 , 674032.357177155 , 674032.357322213 .
// That is the same value as was displayed before the iteration of the children/leafs for the median composite.
// The same applies for the above "y" i.e. the median is 6580821.99121561
// for the three y values 6580821.991 , 6580821.99121561 , 6580821.99437121
}
// The result object also provides convenience methods for the results (which you of course otherwise might calculate by iterating the above results)
CrsTransformationResultStatistic crsTransformationResultStatistic = centralStockholmResultSweRef.CrsTransformationResultStatistic;
// Note that the initially created composite was a "median composite" returning the median as the main value,
// but you can also create an average composite and regardless you can access both the median and the average with the aggregated statistics object:
Console.WriteLine("average coordinate: " + crsTransformationResultStatistic.CoordinateAverage);
Console.WriteLine("median coordinate: " + crsTransformationResultStatistic.CoordinateMedian);
// Console output from the above two rows:
// average coordinate: CrsCoordinate(xEastingLongitude=674032.357166456, yNorthingLatitude=6580821.99219561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
// median coordinate: CrsCoordinate(xEastingLongitude=674032.357177155, yNorthingLatitude=6580821.99121561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
Console.WriteLine("MaxDifferenceForXEastingLongitude: " + crsTransformationResultStatistic.MaxDifferenceForXEastingLongitude);
Console.WriteLine("MaxDifferenceForYNorthingLatitude: " + crsTransformationResultStatistic.MaxDifferenceForYNorthingLatitude);
// Output from the above two rows:
// MaxDifferenceForXEastingLongitude: 0.000322213280014694
// MaxDifferenceForYNorthingLatitude: 0.00337121076881886
// As you can see in the above iteration, the min and max x values are 674032.357 and 674032.357322213 (and the difference is 0.000322213).
// Similarly the min and max y values are 6580821.991 and 6580821.99437121 (and the difference is 0.00337121).
// The above two "MaxDifference" methods are used within the implementation of the convenience method 'isReliable'
// (also illustrated in this example further above)
} // else statement ends
Console.WriteLine("LargerCSharpeExample ends");
Console.ReadLine();
} // method ends
public void TransformToCoordinateWithComposite_ShouldAggregateAsExpected_WhenTheLeafsAreAlsoCompositesAndNestedAtManyLevels()
{
// The method first creates two composites (average and success)
// and then uses those two composites as leafs for a
// weighted average composite, which in
// turn is then used as a leaf within
// the final median composite (together with a "normal leaf" i.e. DotSpatial implementation)
var crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
var compositeAverage = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
var compositeFirstSuccess = crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess();
var weightsForCompositeLeafs = new List <CrsTransformationAdapterWeight> {
CrsTransformationAdapterWeightFactory.Create().CreateFromInstance(
compositeAverage,
1.0 // weight
),
CrsTransformationAdapterWeightFactory.Create().CreateFromInstance(
compositeFirstSuccess,
2.0 // weight
)
};
CrsTransformationAdapterComposite weightedCompositeAdapterWithOtherCompositesAsLeafs = crsTransformationAdapterCompositeFactory.CreateCrsTransformationWeightedAverage(
weightsForCompositeLeafs
);
var normalLeafDotSpatialAdapter = new CrsTransformationAdapterDotSpatial();
var adaptersForMedian = new List <ICrsTransformationAdapter> {
weightedCompositeAdapterWithOtherCompositesAsLeafs,
normalLeafDotSpatialAdapter
};
var compositeMedian = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian(
adaptersForMedian
);
// Now the "complex" composite (nested at two lelvels, with composites as leafs)
// has been conctructed.
// Now create a coordinate:
var inputCoordinate = CrsCoordinateFactory.LatLon(60.0, 20.0);
// Now use the above "complex" composite to transform the coordinate:
var resultMedianWithNestedComposite = compositeMedian.Transform(
inputCoordinate, EpsgNumber.SWEDEN__SWEREF99_TM__3006
);
Assert.IsTrue(resultMedianWithNestedComposite.isSuccess);
var coordinateResultMedianWithNestedComposite = resultMedianWithNestedComposite.OutputCoordinate;
// Now use some leaf (not using DotSpatial as above)
// to also make the same Transform, to use it
// in the result comparison
var mightyLittleGeodesyAdapter = new CrsTransformationAdapterMightyLittleGeodesy();
var coordinateResultMightyLittleGeodesyAdapter = mightyLittleGeodesyAdapter.TransformToCoordinate(
inputCoordinate, EpsgNumber.SWEDEN__SWEREF99_TM__3006
);
// The difference should not be very large, and the delta
// value below is one decimeter
const double deltaValueForAssertions = 0.1;
Assert.AreEqual(
coordinateResultMightyLittleGeodesyAdapter.X,
coordinateResultMedianWithNestedComposite.X,
deltaValueForAssertions
);
Assert.AreEqual(
coordinateResultMightyLittleGeodesyAdapter.Y,
coordinateResultMedianWithNestedComposite.Y,
deltaValueForAssertions
);
var children = resultMedianWithNestedComposite.TransformationResultChildren;
// one child is the weightedComposite and the other dotSpatial
Assert.AreEqual(2, children.Count);
// the assumed order in the two rows below is a little bit fragile
CrsTransformationResult resultWeightedComposite = children[0];
CrsTransformationResult resultDotSpatial = children[1];
Assert.AreEqual(weightedCompositeAdapterWithOtherCompositesAsLeafs, resultWeightedComposite.CrsTransformationAdapterResultSource);
Assert.AreEqual(normalLeafDotSpatialAdapter, resultDotSpatial.CrsTransformationAdapterResultSource);
// the weighted composite has two children (average and firstSuccess)
var childrenForWeightedComposite = resultWeightedComposite.TransformationResultChildren;
Assert.AreEqual(2, childrenForWeightedComposite.Count);
// the leaf should not have any child results
Assert.AreEqual(0, resultDotSpatial.TransformationResultChildren.Count);
// the assumed order in the two rows below is a little bit fragile
CrsTransformationResult resultAverage = childrenForWeightedComposite[0];
CrsTransformationResult resultFirstSuccess = childrenForWeightedComposite[1];
// Average should use all normal leafs
Assert.AreEqual(EXPECTED_NUMBER_OF_ADAPTER_LEAF_IMPLEMENTATIONS, resultAverage.TransformationResultChildren.Count);
// First success should only have one child result i.e. the first should have succeeded
Assert.AreEqual(1, resultFirstSuccess.TransformationResultChildren.Count);
}
public void CSharpeExampleCode()
{
int epsgWgs84 = EpsgNumber.WORLD__WGS_84__4326;
int epsgSweRef = EpsgNumber.SWEDEN__SWEREF99_TM__3006;
Assert.AreEqual(4326, epsgWgs84);
Assert.AreEqual(3006, epsgSweRef);
CrsCoordinate centralStockholmWgs84 = CrsCoordinateFactory.LatLon(59.330231, 18.059196, epsgWgs84);
ICrsTransformationAdapter crsTransformationAdapter = CrsTransformationAdapterCompositeFactory.Create().CreateCrsTransformationMedian();
CrsTransformationResult centralStockholmResultSweRef = crsTransformationAdapter.Transform(centralStockholmWgs84, epsgSweRef);
Assert.IsNotNull(centralStockholmResultSweRef);
Assert.IsTrue(centralStockholmResultSweRef.IsSuccess);
IList <CrsTransformationResult> transformationResultChildren = centralStockholmResultSweRef.TransformationResultChildren;
// Reason for the below assertion with value 3 :
// If the NuGet configuration includes all (currently three) adapter implementations, then the
// above created 'Composite' implementation will below use all three 'leaf' implementations
// and return a coordinate with a median longitude and a median latitude
Assert.AreEqual(3, transformationResultChildren.Count);
// Console.WriteLine(centralStockholmResultSweRef.OutputCoordinate);
// Console output from the above code row:
// CrsCoordinate(xEastingLongitude=674032.357177155, yNorthingLatitude=6580821.99121561, crsIdentifier=CrsIdentifier(crsCode='EPSG:3006', isEpsgCode=True, epsgNumber=3006))
var outputCoordinate = centralStockholmResultSweRef.OutputCoordinate;
Assert.IsNotNull(outputCoordinate);
Assert.AreEqual(674032.357177155, outputCoordinate.XEastingLongitude, SmallDeltaValue);
Assert.AreEqual(6580821.99121561, outputCoordinate.YNorthingLatitude, SmallDeltaValue);
CrsTransformationResultStatistic crsTransformationResultStatistic = centralStockholmResultSweRef.CrsTransformationResultStatistic;
var medianCoordinate = crsTransformationResultStatistic.CoordinateMedian;
// the median values have already been tested above since we used 'CreateCrsTransformationMedian'
// for creating the main result.
var averageCoordinate = crsTransformationResultStatistic.CoordinateAverage;
Assert.AreEqual(674032.35716645606, averageCoordinate.XEastingLongitude, SmallDeltaValue);
Assert.AreEqual(6580821.9921956062, averageCoordinate.YNorthingLatitude, SmallDeltaValue);
Assert.IsTrue(crsTransformationResultStatistic.IsStatisticsAvailable);
Assert.AreEqual(3, crsTransformationResultStatistic.NumberOfPotentiallySuccesfulResults);
Assert.That(crsTransformationResultStatistic.MaxDifferenceForXEastingLongitude, Is.LessThan(0.01));
Assert.That(crsTransformationResultStatistic.MaxDifferenceForYNorthingLatitude, Is.LessThan(0.01));
// "Reliable True" below since there should be three sucesful results
// and the absolute value for the difference between longitudes and longitudes
// should be less than 0.01
Assert.IsTrue(
centralStockholmResultSweRef.IsReliable(
3, // minimumNumberOfSuccesfulResults
0.01 // maxDeltaValueForXLongitudeAndYLatitude
)
);
// "Reliable False" below because too extreme requirements of equal values for all the results
// i.e. very small tolerance for differences
Assert.IsFalse(
centralStockholmResultSweRef.IsReliable(
3, // minimumNumberOfSuccesfulResults
0.000000000000000000001 // maxDeltaValueForXLongitudeAndYLatitude
)
);
// "Reliable False" below because can not require 4 succesful values
// when there are only 3 implementations
Assert.IsFalse(
centralStockholmResultSweRef.IsReliable(
4, // minimumNumberOfSuccesfulResults
0.01 // maxDeltaValueForXLongitudeAndYLatitude
)
);
ICrsTransformationAdapter crsTransformationAdapterResultSource = centralStockholmResultSweRef.CrsTransformationAdapterResultSource;
CrsTransformationAdapteeType adapteeType = crsTransformationAdapterResultSource.AdapteeType;
Assert.AreEqual(CrsTransformationAdapteeType.COMPOSITE_MEDIAN, adapteeType);
var dict = new Dictionary <CrsTransformationAdapteeType, bool>();
foreach (CrsTransformationResult crsTransformationResultLeaf in transformationResultChildren)
{
Assert.IsTrue(crsTransformationResultLeaf.IsSuccess);
dict.Add(crsTransformationResultLeaf.CrsTransformationAdapterResultSource.AdapteeType, true);
// Leafs always only have one result and thus there are zero difference between max and min result.
// Therefore the below assertion should succeed
Assert.IsTrue(
crsTransformationResultLeaf.IsReliable(
1, // minimumNumberOfSuccesfulResults
0.0000000000000000000000000000001 // maxDeltaValueForXLongitudeAndYLatitude
)
);
// Leafs always only have one result and thus the below tested method should return False
Assert.IsFalse(
crsTransformationResultLeaf.IsReliable(
2, // minimumNumberOfSuccesfulResults
0.1 // maxDeltaValueForXLongitudeAndYLatitude
)
);
CrsTransformationResultStatistic leafResultStatistic = crsTransformationResultLeaf.CrsTransformationResultStatistic;
Assert.IsTrue(leafResultStatistic.IsStatisticsAvailable);
Assert.AreEqual(1, leafResultStatistic.NumberOfPotentiallySuccesfulResults);
Assert.That(leafResultStatistic.MaxDifferenceForXEastingLongitude, Is.LessThan(0.01));
Assert.That(leafResultStatistic.MaxDifferenceForYNorthingLatitude, Is.LessThan(0.01));
}
Assert.AreEqual(3, dict.Count);
Assert.IsTrue(dict.ContainsKey(CrsTransformationAdapteeType.LEAF_MIGHTY_LITTLE_GEODESY_1_0_1));
Assert.IsTrue(dict.ContainsKey(CrsTransformationAdapteeType.LEAF_DOT_SPATIAL_2_0_0_RC1));
Assert.IsTrue(dict.ContainsKey(CrsTransformationAdapteeType.LEAF_PROJ_NET_4_GEO_API_1_4_1));
}
public void method()
{
// ...
// The interface with seven implementations as illustrated below
ICrsTransformationAdapter crsTransformationAdapter;
// The interface is defined in the library "Programmerare.CrsTransformations.Core" with this full name:
// Programmerare.CrsTransformations.ICrsTransformationAdapter
// The three 'Leaf' implementations:
// Library "Programmerare.CrsTransformations.Adapter.DotSpatial", class:
// Programmerare.CrsTransformations.Adapter.DotSpatial.CrsTransformationAdapterDotSpatial
crsTransformationAdapter = new CrsTransformationAdapterDotSpatial();
// Library "Programmerare.CrsTransformations.Adapter.ProjNet", class:
// Programmerare.CrsTransformations.Adapter.ProjNet.CrsTransformationAdapterProjNet
crsTransformationAdapter = new CrsTransformationAdapterProjNet();
// Library "Programmerare.CrsTransformations.Adapter.MightyLittleGeodesy", class:
// Programmerare.CrsTransformations.Adapter.MightyLittleGeodesy.CrsTransformationAdapterMightyLittleGeodesy
crsTransformationAdapter = new CrsTransformationAdapterMightyLittleGeodesy();
// - - - - - - - - - - - -
// The four 'Composite' implementations below are all located in the library
// "Programmerare.CrsTransformations.Core" and the factory class is:
// Programmerare.CrsTransformations.CompositeTransformations.CrsTransformationAdapterCompositeFactory
var crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationAverage();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationFirstSuccess();
// All of the above three factory methods without any parameter will try to use as many of
// the three (currently) 'leaf' implementations as are available in runtime
// (e.g. are included as NuGet dependencies).
// If you want to specify explicitly which ones to be used, you can provide
// a parameter 'IList<ICrsTransformationAdapter>' to the Create method like this:
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create(
new List <ICrsTransformationAdapter> {
new CrsTransformationAdapterDotSpatial(),
new CrsTransformationAdapterProjNet(),
new CrsTransformationAdapterMightyLittleGeodesy(),
}
);
// The fourth 'Composite' below does not use any implicit implementations
// but if you want to use a result created as a weighted average then the weights need
// to be specified explicitly per leaf implementation as in the example below.
var weightFactory = CrsTransformationAdapterWeightFactory.Create();
crsTransformationAdapter = crsTransformationAdapterCompositeFactory.CreateCrsTransformationWeightedAverage(
new List <CrsTransformationAdapterWeight> {
weightFactory.CreateFromInstance(new CrsTransformationAdapterDotSpatial(), 1.0),
weightFactory.CreateFromInstance(new CrsTransformationAdapterProjNet(), 1.0),
weightFactory.CreateFromInstance(new CrsTransformationAdapterMightyLittleGeodesy(), 2.0),
}
);
// The weight values above illustrates a situation where you (for some reason) want to consider
// the transformation results from 'MightyLittleGeodesy' as being 'two times better' than the others.
}
public void SetUp()
{
weightFactory = CrsTransformationAdapterWeightFactory.Create();
crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
}
public void FindPotentialBuggyImplementationsHelper(
int minEpsgCrsCode,
int maxEpsgCrsCode,
double?optionalDelta = null
)
{
int numberIfEpsgCodesToConsiderInIteration = maxEpsgCrsCode - minEpsgCrsCode;
bool manyWillBeIterated = numberIfEpsgCodesToConsiderInIteration > 100;
double deltaDiffToUse = manyWillBeIterated ? deltaDiff : double.MinValue;
if (optionalDelta.HasValue)
{
deltaDiffToUse = optionalDelta.Value;
}
var crsTransformationAdapterCompositeFactory = CrsTransformationAdapterCompositeFactory.Create();
CrsTransformationAdapterComposite crsTransformationComposite = crsTransformationAdapterCompositeFactory.CreateCrsTransformationMedian();
verifyThreeImplementations(crsTransformationComposite); // to make sure that the above factory really creates an object which will use three implementations
IList <CrsTransformationResult> transformResultsWithLargeDifferences = new List <CrsTransformationResult>();
CrsIdentifier wgs84 = CrsIdentifierFactory.CreateFromEpsgNumber(EpsgNumber.WORLD__WGS_84__4326);
var stopWatch = new Stopwatch();
stopWatch.Start();
IList <EpsgCrsAndAreaCodeWithCoordinates> coordinatesFromGeneratedCsvFile = CoordinateTestDataGeneratedFromEpsgDatabaseTest.GetCoordinatesFromGeneratedCsvFile();
int seconds = (int)stopWatch.Elapsed.TotalSeconds;
WriteLine("Time for reading the content of the input file: " + seconds);
stopWatch.Restart();
int totalNumberOfSeconds;
WriteLine("number of rows to iterate: " + coordinatesFromGeneratedCsvFile.Count);
for (int i = 0; i < coordinatesFromGeneratedCsvFile.Count; i++)
{
if (manyWillBeIterated && (i % 100 == 0))
{
//WriteLine("number of rows iterated so far: " + i);
totalNumberOfSeconds = (int)stopWatch.Elapsed.TotalSeconds;
//WriteLine("Number of seconds so far: " + totalNumberOfSeconds);
// if (i > 50) break;
}
EpsgCrsAndAreaCodeWithCoordinates epsgCrsAndAreaCodeWithCoordinates = coordinatesFromGeneratedCsvFile[i];
if (
epsgCrsAndAreaCodeWithCoordinates.epsgCrsCode < minEpsgCrsCode
||
epsgCrsAndAreaCodeWithCoordinates.epsgCrsCode > maxEpsgCrsCode
)
{
continue;
}
if (!manyWillBeIterated)
{
//Console.WriteLine("iterated epsgCrsCode: " + epsgCrsAndAreaCodeWithCoordinates.epsgCrsCode);
}
CrsCoordinate coordinateInputWgs84 = CrsCoordinateFactory.CreateFromYNorthingLatitudeAndXEastingLongitude(epsgCrsAndAreaCodeWithCoordinates.centroidY, epsgCrsAndAreaCodeWithCoordinates.centroidX, wgs84);
CrsTransformationResult resultOutputFromWgs4 = crsTransformationComposite.Transform(coordinateInputWgs84, epsgCrsAndAreaCodeWithCoordinates.epsgCrsCode);
if (!resultOutputFromWgs4.IsSuccess)
{
continue;
}
CrsTransformationResult resultWhenTransformedBackToWgs84 = crsTransformationComposite.Transform(resultOutputFromWgs4.OutputCoordinate, wgs84);
if (!resultWhenTransformedBackToWgs84.IsSuccess)
{
continue;
}
CrsTransformationResultStatistic crsTransformationResultStatistic = resultWhenTransformedBackToWgs84.CrsTransformationResultStatistic;
Assert.IsNotNull(crsTransformationResultStatistic);
Assert.IsTrue(crsTransformationResultStatistic.IsStatisticsAvailable);
if (
crsTransformationResultStatistic.MaxDifferenceForXEastingLongitude > deltaDiffToUse
||
crsTransformationResultStatistic.MaxDifferenceForYNorthingLatitude > deltaDiffToUse
)
{
transformResultsWithLargeDifferences.Add(resultWhenTransformedBackToWgs84);
}
else
{
if (!manyWillBeIterated)
{
//Console.WriteLine("NOT 'big' difference for EPSG " + epsgCrsAndAreaCodeWithCoordinates.epsgCrsCode);
int count = crsTransformationComposite.TransformationAdapterChildren.Count;
//Console.WriteLine("Number of implementations not having big difference: " + count);
}
}
}
WriteLine("Number of iterated rows/coordinates: " + coordinatesFromGeneratedCsvFile.Count);
WriteLine("Number of results with 'large' differences: " + transformResultsWithLargeDifferences.Count);
for (int i = 0; i < transformResultsWithLargeDifferences.Count; i++)
{
CrsTransformationResult transformResult = transformResultsWithLargeDifferences[i];
WriteLine("----------------------------------------");
WriteLine("epsg " + transformResult.InputCoordinate.CrsIdentifier.CrsCode);
WriteLine("MaxDiffYLatitude : " + transformResult.CrsTransformationResultStatistic.MaxDifferenceForYNorthingLatitude);
WriteLine("MaxDiffYLongitude: " + transformResult.CrsTransformationResultStatistic.MaxDifferenceForXEastingLongitude);
IList <CrsTransformationResult> subResults = transformResult.TransformationResultChildren;
for (int j = 0; j < subResults.Count; j++)
{
CrsTransformationResult subTransformResult = subResults[j];
if (subTransformResult.IsSuccess)
{
WriteLine(subTransformResult.OutputCoordinate + " , " + subTransformResult.CrsTransformationAdapterResultSource.AdapteeType);
}
}
}
}