public ChronopicAutoDetect(ChronopicType type, Config.AutodetectPortEnum configAutoDetect)
{
/*
* Try to detect a normal 4MHz Chronopic on a 20MHz encoder fails
* but encoder can be used normally
* In the other hand, try to detect an encoder on a 4MHz Chronopic fails
* but encoder cannot be used until 'reset' or disconnect cable (and can be problems with Chronojump GUI)
*
* So the solution is:
* if we are searching encoder, on every port first check if 4MHz connection can be stablished, if it's Found, then normal Chronopic is found
* if is not Fount, then search for the encoder.
*
* The only problem is in normal Chronopics with old firmware (without the 'J' read/write
* they will not work after trying to be recognised as an encoder, until reset or disconnect cable
*
*/
this.searched = type;
this.configAutoDetect = configAutoDetect;
if (configAutoDetect == Config.AutodetectPortEnum.INACTIVE)
{
return;
Detected = "";
}
//no matter if we are searching for 4MHz or 20MHz (encoder)
//first see if 4MHz is connected
ChronopicAuto caNormal = new ChronopicAutoCheck();
caNormal.IsEncoder = false; //for the bauds.
autoDetect(caNormal);
}
public void on_radio_autodetect_discard_first_toggled(object obj, EventArgs args)
{
if (autodetectSignalEnabled && radio_autodetect_discard_first.Active)
{
configAutodetectPort = Config.AutodetectPortEnum.DISCARDFIRST;
Config.UpdateField("AutodetectPort", configAutodetectPort.ToString());
}
}
public void on_radio_autodetect_inactive_toggled(object obj, EventArgs args)
{
if (autodetectSignalEnabled && radio_autodetect_inactive.Active)
{
configAutodetectPort = Config.AutodetectPortEnum.INACTIVE;
Config.UpdateField("AutodetectPort", configAutodetectPort.ToString());
}
}
public ChronopicDetect(SerialPort sp, Gtk.ProgressBar progressbar, Gtk.Button button_cancel, Gtk.Button button_info,
Config.AutodetectPortEnum configAutoDetect)
{
this.sp = sp;
this.progressbar = progressbar;
this.button_cancel = button_cancel;
this.configAutoDetect = configAutoDetect;
button_cancel.Clicked += new EventHandler(on_button_cancel_clicked);
button_info.Clicked += new EventHandler(on_button_info_clicked);
FakeButtonDone = new Gtk.Button();
Detecting = false;
}
private void configInit()
{
//trying new Config class
Config config = new Config();
config.Read();
LogB.Information("Config:\n" + config.ToString());
/*
* TODO: do an else to any option
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
if(config.Maximized)
app1.Maximize();
if(config.CustomButtons) {
//---- capture tab ----
hbox_encoder_capture_extra_mass_no_raspberry.Visible = false;
hbox_encoder_capture_extra_mass_raspberry.Visible = true;
button_encoder_select.HeightRequest = 40;
//this will make all encoder capture controls taller
button_encoder_capture.SetSizeRequest(125,60);
spin_encoder_im_weights_n.Visible = false;
hbox_encoder_im_weights_n.Visible = true;
//---- analyze tab ----
hbox_encoder_analyze_signal_or_curves.HeightRequest = 40;
button_encoder_analyze.SetSizeRequest(120,40);
}
if(! config.UseVideo) {
useVideo = false;
alignment_video_encoder.Visible = false;
}
//Auto-detect stuff
configAutodetectPort = config.AutodetectPort;
autodetectSignalEnabled = false; //do not raise signals that could rewrite the config file (loop)
if(configAutodetectPort == Config.AutodetectPortEnum.ACTIVE)
radio_autodetect_active.Active = true;
else if(configAutodetectPort == Config.AutodetectPortEnum.INACTIVE)
radio_autodetect_inactive.Active = true;
else // (configAutodetectPort == Config.AutodetectPortEnum.DISCARDFIRST)
radio_autodetect_discard_first.Active = true;
autodetectSignalEnabled = true; //activate signals again
//show only power
if(config.OnlyEncoderGravitatory)
select_menuitem_mode_toggled(Constants.Menuitem_modes.POWERGRAVITATORY);
else if(config.OnlyEncoderInertial)
select_menuitem_mode_toggled(Constants.Menuitem_modes.POWERINERTIAL);
if(config.EncoderCaptureShowOnlyBars)
{
//attention: this makes encoder_capture_signal_drawingarea == null
vpaned_encoder_capture_video_and_set_graph.Visible = false;
vpaned_encoder_main.Remove(alignment_treeview_encoder_capture_curves);
vbox_treeview_encoder_at_second_page.PackStart(alignment_treeview_encoder_capture_curves);
notebook_encoder_capture_main.ShowTabs = true;
} else {
/*
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
/*
notebook_encoder_capture_main.ShowTabs = false;
vbox_treeview_encoder_at_second_page.Remove(alignment_treeview_encoder_capture_curves);
vpaned_encoder_main.PackStart(alignment_treeview_encoder_capture_curves);
*/
}
encoderUpdateTreeViewWhileCapturing = config.EncoderUpdateTreeViewWhileCapturing;
if(config.PersonWinHide) {
//vbox_persons.Visible = false;
notebook_session_person.Visible = false;
hbox_encoder_person.Visible = true;
}
if(config.EncoderAnalyzeHide) {
hbox_encoder_sup_capture_analyze_two_buttons.Visible = false;
}
if(config.Econf != null) {
encoderConfigurationDefinedFromFile = true;
encoderConfigurationCurrent = config.Econf;
encoderConfigurationGUIUpdate();
//TODO: allow to see full data, but don't allow to change it (Open window content as unsensitive)
}
if(config.SessionMode == Config.SessionModeEnum.UNIQUE)
{
main_menu.Visible = false;
button_preferences_not_menu.Visible = true;
if(! Sqlite.Exists(false, Constants.SessionTable, "session")) {
//this creates the session and inserts at DB
currentSession = new Session(
"session", "", DateTime.Today, //name, place, dateTime
Constants.SportUndefinedID, Constants.SpeciallityUndefinedID, Constants.LevelUndefinedID,
"", Constants.ServerUndefinedID); //comments, serverID
} else
currentSession = SqliteSession.SelectByName("session");
on_load_session_accepted();
}
//TODO
//RunScriptOnExit
/*
if(linuxType == linuxTypeEnum.NETWORKS) {
//mostrar directament el power
select_menuitem_mode_toggled(Constants.Menuitem_modes.POWER);
//no mostrar menu
main_menu.Visible = false;
//no mostrar persones
//vbox_persons.Visible = false;
//TODO: rfid can be here, also machine, maybe weight, other features
//time, gym, ...
//show rfid
hbox_rfid.Visible = true;
//to test display, just make sensitive the top controls, but beware there's no session yet and no person
notebook_sup.Sensitive = true;
hbox_encoder_sup_capture_analyze.Sensitive = true;
notebook_encoder_sup.Sensitive = false;
}
*/
}
public void on_radio_autodetect_inactive_toggled(object obj, EventArgs args)
{
if(autodetectSignalEnabled && radio_autodetect_inactive.Active)
{
configAutodetectPort = Config.AutodetectPortEnum.INACTIVE;
Config.UpdateField("AutodetectPort", configAutodetectPort.ToString());
}
}
public void on_radio_autodetect_discard_first_toggled(object obj, EventArgs args)
{
if(autodetectSignalEnabled && radio_autodetect_discard_first.Active)
{
configAutodetectPort = Config.AutodetectPortEnum.DISCARDFIRST;
Config.UpdateField("AutodetectPort", configAutodetectPort.ToString());
}
}
private void configInit()
{
//trying new Config class
Config config = new Config();
config.Read();
LogB.Information("Config:\n" + config.ToString());
/*
* TODO: do an else to any option
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
if (config.Maximized)
{
app1.Maximize();
}
if (config.CustomButtons)
{
//---- capture tab ----
hbox_encoder_capture_extra_mass_no_raspberry.Visible = false;
hbox_encoder_capture_extra_mass_raspberry.Visible = true;
button_encoder_select.HeightRequest = 40;
//this will make all encoder capture controls taller
//88 then buttons will be the same height than button_encoder_select. The 8 extra is for the vertical space
button_encoder_capture.SetSizeRequest(125, 88);
//button_encoder_capture.HeightRequest = 88;
spin_encoder_im_weights_n.Visible = false;
hbox_encoder_im_weights_n.Visible = true;
//---- analyze tab ----
hbox_encoder_analyze_signal_or_curves.HeightRequest = 40;
button_encoder_analyze.SetSizeRequest(120, 40);
}
if (!config.UseVideo)
{
useVideo = false;
alignment_video_encoder.Visible = false;
}
//Auto-detect stuff
configAutodetectPort = config.AutodetectPort;
autodetectSignalEnabled = false; //do not raise signals that could rewrite the config file (loop)
if (configAutodetectPort == Config.AutodetectPortEnum.ACTIVE)
{
radio_autodetect_active.Active = true;
}
else if (configAutodetectPort == Config.AutodetectPortEnum.INACTIVE)
{
radio_autodetect_inactive.Active = true;
}
else // (configAutodetectPort == Config.AutodetectPortEnum.DISCARDFIRST)
{
radio_autodetect_discard_first.Active = true;
}
autodetectSignalEnabled = true; //activate signals again
//show only power
if (config.OnlyEncoderGravitatory)
{
select_menuitem_mode_toggled(menuitem_modes.POWERGRAVITATORY);
}
else if (config.OnlyEncoderInertial)
{
select_menuitem_mode_toggled(menuitem_modes.POWERINERTIAL);
}
if (config.EncoderCaptureShowOnlyBars)
{
vpaned_encoder_capture_video_and_set_graph.Visible = false;
vpaned_encoder_main.Remove(alignment_treeview_encoder_capture_curves);
vbox_treeview_encoder_at_second_page.PackStart(alignment_treeview_encoder_capture_curves);
notebook_encoder_capture_main.ShowTabs = true;
}
else
{
/*
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
/*
* notebook_encoder_capture_main.ShowTabs = false;
* vbox_treeview_encoder_at_second_page.Remove(alignment_treeview_encoder_capture_curves);
* vpaned_encoder_main.PackStart(alignment_treeview_encoder_capture_curves);
*/
}
encoderUpdateTreeViewWhileCapturing = config.EncoderUpdateTreeViewWhileCapturing;
if (config.PersonWinHide)
{
//vbox_persons.Visible = false;
notebook_session_person.Visible = false;
hbox_encoder_person.Visible = true;
}
if (config.EncoderAnalyzeHide)
{
hbox_encoder_sup_capture_analyze_two_buttons.Visible = false;
}
if (config.Econf != null)
{
encoderConfigurationDefinedFromFile = true;
encoderConfigurationCurrent = config.Econf;
encoderConfigurationGUIUpdate();
//TODO: allow to see full data, but don't allow to change it (Open window content as unsensitive)
}
if (config.SessionMode == Config.SessionModeEnum.UNIQUE)
{
main_menu.Visible = false;
button_preferences_not_menu.Visible = true;
if (!Sqlite.Exists(false, Constants.SessionTable, "session"))
{
//this creates the session and inserts at DB
currentSession = new Session(
"session", "", DateTime.Today, //name, place, dateTime
Constants.SportUndefinedID, Constants.SpeciallityUndefinedID, Constants.LevelUndefinedID,
"", Constants.ServerUndefinedID); //comments, serverID
}
else
{
currentSession = SqliteSession.SelectByName("session");
}
on_load_session_accepted();
}
//TODO
//RunScriptOnExit
/*
* if(linuxType == linuxTypeEnum.NETWORKS) {
* //mostrar directament el power
* select_menuitem_mode_toggled(menuitem_modes.POWER);
*
* //no mostrar menu
* main_menu.Visible = false;
*
* //no mostrar persones
* //vbox_persons.Visible = false;
* //TODO: rfid can be here, also machine, maybe weight, other features
* //time, gym, ...
*
* //show rfid
* hbox_rfid.Visible = true;
*
* //to test display, just make sensitive the top controls, but beware there's no session yet and no person
* notebook_sup.Sensitive = true;
* hbox_encoder_sup_capture_analyze.Sensitive = true;
* notebook_encoder_sup.Sensitive = false;
* }
*/
}
