public Constr3DScrewPath(GeoObjectList selectedObjects)
{
GeoObjectList clones = selectedObjects.CloneObjects();
if (selectedObjects.Count == 1)
{
if (selectedObjects[0] is Hatch)
{
shape = (selectedObjects[0] as Hatch).CompoundShape;
plane = (selectedObjects[0] as Hatch).Plane;
return;
}
else if (selectedObjects[0] is Face)
{
if ((selectedObjects[0] as Face).Surface is PlaneSurface)
{
// here we could directely set shape and plane
}
clones.Clear();
foreach (Edge edg in (selectedObjects[0] as Face).AllEdgesIterated())
{
if (edg.Curve3D != null)
{
clones.Add(edg.Curve3D as IGeoObject);
}
}
}
}
shape = CompoundShape.CreateFromList(clones, Precision.eps, out plane);
if (shape == null)
{
Path toRotate = Path.Construct();
toRotate.Set(clones, false, Precision.eps);
if (toRotate.CurveCount > 0)
{
if (toRotate.GetPlanarState() == PlanarState.Planar)
{
plane = toRotate.GetPlane();
path = toRotate.GetProjectedCurve(plane) as Path2D;
}
}
}
}
public Constr3DFaceExtrude(GeoObjectList selectedObjectsList)
: this()
{
selectedMode = (selectedObjectsList != null);
if (selectedMode)
{
GeoObjectList clonedList = selectedObjectsList.Clone();
GeoObjectList curves = new GeoObjectList();
for (int i = clonedList.Count - 1; i >= 0; --i)
{
if (clonedList[i] is ICurve)
{
curves.Add(clonedList[i]);
clonedList.Remove(i);
}
}
Plane pln;
CompoundShape cs = CompoundShape.CreateFromList(curves, Precision.eps, out pln);
if (cs != null && !cs.Empty)
{ // man konnte ein CompoundShape erzeugen, dann dieses zu Faces machen und verwenden
for (int i = 0; i < cs.SimpleShapes.Length; i++)
{
PlaneSurface ps = new PlaneSurface(pln);
Face toAdd = Face.MakeFace(ps, cs.SimpleShapes[i]);
toAdd.CopyAttributes(curves[0]);
clonedList.Add(toAdd);
}
this.selectedObjectsList = clonedList;
}
else
{
this.selectedObjectsList = selectedObjectsList.Clone();
}
ListDefault(this.selectedObjectsList.Count); // setzt alle Listen auf gleiche Länge, Inhalte "null"
}
;
}
private bool extrudeOrg()
{
if (selectedObjectsList == null)
{
return(false);
}
IGeoObject iGeoObjectSel;
// IGeoObject iGeoObjectOrg;
blk = Block.Construct(); // zur Darstellung
if (base.ActiveObject != null)
{
blk.CopyAttributes(base.ActiveObject);
}
// der block wird das neue aktive Objekt, er muss die Attribute tragen, weil sie später
// wieder von ihm verlangt werden
blk.IsTmpContainer = true;
Boolean success = false; // hat er wenigstens eins gefunden
int extrudeModeTemp = extrudeMode; // Merker, da extrudeMode evtl. umgeschaltet wird
Plane pln;
CompoundShape dbg = CompoundShape.CreateFromList(selectedObjectsList, Precision.eps, out pln);
for (int i = 0; i < selectedObjectsList.Count; i++) // läuft über alle selektierten Objekte. Evtl nur eins bei Konstruktion
{
IGeoObject iGeoObjectTemp = null; // lokaler Merker
extrudeMode = extrudeModeTemp;
iGeoObjectSel = selectedObjectsList[i]; // zur Vereinfachung
geoObjectOrgList[i] = iGeoObjectSel; // zum Weglöschen des Originals in onDone
ownerList[i] = iGeoObjectSel.Owner; // owner merken für löschen
pathCreatedFromModelList[i] = null;
shapeList[i] = null;
// Boolean VectorOrHeightTemp = VectorOrHeight;
if ((iGeoObjectSel is Face) || (iGeoObjectSel is Shell))
{ // nur kopieren
iGeoObjectTemp = iGeoObjectSel.Clone();
}
else
{
if (iGeoObjectSel is ICurve)
{
Path p = null;
p = CADability.GeoObject.Path.CreateFromModel(iGeoObjectSel as ICurve, base.Frame.ActiveView.Model, Frame.ActiveView.Projection, true);
if (p == null)
{ // also nur Einzelelement
if (iGeoObjectSel is Path)
{ // schon fertig
p = iGeoObjectSel.Clone() as Path;
}
else
{ // Pfad aus Einzelobjekt machen:
p = Path.Construct();
if (iGeoObjectSel is Polyline)
{
p.Set(new ICurve[] { iGeoObjectSel.Clone() as ICurve });
p.Flatten();
}
else if (iGeoObjectSel is Ellipse && !(iGeoObjectSel as Ellipse).IsArc)
{
Ellipse elli = iGeoObjectSel as Ellipse;
p.Set(elli.Split(0.5)); // zwei Halbkreise
}
else
{
p.Set(new ICurve[] { iGeoObjectSel.Clone() as ICurve });
}
}
}
else
{ // CreateFromModel hat was zusammengesetzt
if (p.IsClosed)
{
// iGeoObjectOrg = null; // zum nicht Weglöschen des Originals in onDone
geoObjectOrgList[i] = null; // zum nicht Weglöschen des Originals in onDone
pathCreatedFromModelList[i] = p; // kopie merken für onDone
p = p.Clone() as Path;
p.Flatten();
}
}
if (p.IsClosed)
{ // jetzt face machen
iGeoObjectTemp = Make3D.MakeFace(p, Frame.Project);
}
}
}
if (iGeoObjectTemp != null)
{ // also was geeignetes dabei
if (planeMode) // Objektebene soll Grundlage sein
{
Face faceTemp = null;
if (iGeoObjectTemp is Face)
{
faceTemp = (iGeoObjectTemp as Face);
}
if ((iGeoObjectTemp is Shell) && ((iGeoObjectTemp as Shell).Faces.Length == 1))
{
faceTemp = (iGeoObjectTemp as Shell).Faces[0];
}
if (faceTemp != null)
{
if (faceTemp.Surface is PlaneSurface)
{
GeoVector faceNormal = faceTemp.Surface.GetNormal(GeoPoint2D.Origin);
// GeoVector temp = base.ActiveDrawingPlane.ToLocal(faceNormal);
// die ActiveDrawingPlane ändert sich wenn immer der Cursor durch ein Fenster bewegt wird
// das hat manchmal komische Effekte. deshalb hier die etwas statischere
// ActiveView.Projection.DrawingPlane verwenden
GeoVector temp = base.Frame.ActiveView.Projection.DrawingPlane.ToLocal(faceNormal);
if (temp.z < 0.0)
{
faceNormal.Reverse();
}
vector = height * faceNormal;
vectorOffset = heightOffset * faceNormal;
}
else
{
heightInput.ReadOnly = true;
extrudeMode = 2;
// VectorOrHeight = true;
optionalOrg();
}
}
}
if (!vectorOffset.IsNullVector())
{
ModOp m = ModOp.Translate(vectorOffset);
iGeoObjectTemp.Modify(m);
}
// IGeoObject shape = Make3D.MakePrism(iGeoObjectTemp, vector, Frame.Project);
IGeoObject shape;
if (pipePath == null)
{
shape = Make3D.MakePrism(iGeoObjectTemp, vector, Frame.Project, false);
}
else
{
shape = Make3D.MakePipe(iGeoObjectTemp, pipePath, Frame.Project);
}
if (shape != null)
{
// shape.CopyAttributes(iGeoObjectSel as IGeoObject);
shape.CopyAttributes(blk);
// die Attribute müssen vom Block übernommen werden
shapeList[i] = shape; // fertiger Körper in shapeList
blk.Add(shape); // zum Darstellen
base.FeedBack.AddSelected(iGeoObjectTemp); // zum Markieren des Ursprungsobjekts
success = true;
}
}
// VectorOrHeight = VectorOrHeightTemp;
} // for-Schleife über die Objekte der Liste
extrudeMode = extrudeModeTemp;
if (success)
{
base.ActiveObject = blk; // darstellen
base.ShowActiveObject = true;
return(true);
}
else
{
optionalOrg();
heightInput.ReadOnly = false;
base.ShowActiveObject = false;
base.FeedBack.ClearSelected();
return(false);
}
}
