private void btnSubmit_Click(object sender, EventArgs e)
{
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
//电子秤
commonDAO.SetAppletConfig("电子秤串口", (cmbLibra_COM.SelectedIndex + 1).ToString());
commonDAO.SetAppletConfig("电子秤波特率", (cmbLibra_Bandrate.SelectedItem as ComboItem).Text);
commonDAO.SetAppletConfig("电子秤数据位", (cmbDataBits.SelectedItem as ComboItem).Text);
commonDAO.SetAppletConfig("电子秤停止位", (cmbParity.SelectedItem as ComboItem).Text);
//电子秤最小重量
commonDAO.SetAppletConfig("电子秤最小重量", dInputLibraWeight.Value.ToString());
//是否启用称重
commonDAO.SetAppletConfig("启用称重", (chkIsUseWeight.Checked ? 1 : 0).ToString());
//样罐
commonDAO.SetCommonAppletConfig("0.2mm样罐重", db2Weight.Value.ToString());
commonDAO.SetCommonAppletConfig("3mm样罐重", db3Weight.Value.ToString());
commonDAO.SetCommonAppletConfig("6mm样罐重", db6Weight.Value.ToString());
commonDAO.SetCommonAppletConfig("0.2mm超差重", db2OverWeight.Value.ToString());
commonDAO.SetCommonAppletConfig("3mm超差重", db3OverWeight.Value.ToString());
commonDAO.SetCommonAppletConfig("6mm超差重", db6OverWeight.Value.ToString());
//读卡器
commonDAO.SetAppletConfig("读卡器IP", iptxtIP.Value);
commonDAO.SetAppletConfig("读卡器端口", txtPort.Text);
commonDAO.SetAppletConfig("读卡器扇区", (cmbSecNumber.SelectedItem as ComboItem).Text);
commonDAO.SetAppletConfig("读卡器块区", (cmbBlockNumber.SelectedItem as ComboItem).Text);
this.Close();
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetCommonAppletConfig("火车采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("入口采样机", Convert.ToInt16(chbInFactorySampler.Checked).ToString());
commonDAO.SetAppletConfig("采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_IP地址", iptxtIOIP.Value);
commonDAO.SetAppletConfig("IO控制器_端口", txtIOPort.Text);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射1端口", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射2端口", (cmbInfraredSensor2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯2端口", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// 读卡器网口
commonDAO.SetAppletConfig("读卡器1_IP地址", iptxtRwerIP.Value);
commonDAO.SetAppletConfig("读卡器1_端口", txtRwerPort.Text);
commonDAO.SetAppletConfig("读卡器_标签过滤", txtRwerTagStartWith.Text);
commonDAO.SetAppletConfig("读卡器1_功率", (cmbRwerPower.SelectedItem as DataItem).Value);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LED显示屏2_IP地址", iptxtLED2IP.Value);
return(true);
}
/// <summary>
/// ±£´æÅäÖÃ
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("¿ª»úÆô¶¯", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("Ó¯Òì³£¶ÖÊý", dbtxtProfinWeight.Value.ToString());
commonDAO.SetAppletConfig("¿÷Òì³£¶ÖÊý", dbtxtProfinWeight2.Value.ToString());
try
{
#if DEBUG
#else
// Ìí¼Ó¡¢È¡Ïû¿ª»úÆô¶¯
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO¿ØÖÆÆ÷
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_IPµØÖ·", iptxtIOIP.Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_¶Ë¿Ú", txtIOPort.Text);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð1¶Ë¿Ú", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð2¶Ë¿Ú", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð3¶Ë¿Ú", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð4¶Ë¿Ú", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1Éý¸Ë¶Ë¿Ú", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1½µ¸Ë¶Ë¿Ú", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2Éý¸Ë¶Ë¿Ú", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2½µ¸Ë¶Ë¿Ú", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ1¶Ë¿Ú", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ2¶Ë¿Ú", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// LEDÏÔʾÆÁ
commonDAO.SetAppletConfig("LEDÏÔʾÆÁ1_IPµØÖ·", iptxtLED1IP.Value);
// ¶Á¿¨Æ÷Íø¿Ú
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1IPµØÖ·", ipAddressInput1.Value);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1¶Ë¿Ú", ipAddressPort1.Text);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷_±êÇ©¹ýÂË", txtRwerTagStartWith.Text);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1¹¦ÂÊ", (cmbRwerPower.SelectedItem as DataItem).Value);
// ·¢¿¨Æ÷
commonDAO.SetAppletConfig("·¢¿¨Æ÷_´®¿Ú", (cmbRwer2Com.SelectedItem as DataItem).Value);
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
if (txtJxSamplerMachineCode.Text.Contains("1"))
{
commonDAO.SetCommonAppletConfig("#1汽车机械采样机接口连接字符串", txtSqlConnStr.Text.Trim());
}
else if (txtJxSamplerMachineCode.Text.Contains("2"))
{
commonDAO.SetCommonAppletConfig("#2汽车机械采样机接口连接字符串", txtSqlConnStr.Text.Trim());
}
commonDAO.SetAppletConfig("采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_确认按钮端口", (cmbAffirmPort.SelectedItem as DataItem).Value);
// 车号识别
commonDAO.SetAppletConfig("车号识别1_IP地址", iptxtRwer1.Value);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
// 读卡器
commonDAO.SetAppletConfig("读卡器1_串口", (cmbRwer1Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("读卡器_标签过滤", txtRwerTagStartWith.Text);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("采样机设备编码", txtSampleCode.Text);
commonDAO.SetAppletConfig("入厂制样机设备编码", txtRCMakeCode.Text);
commonDAO.SetAppletConfig("出厂制样机设备编码", txtCCMakeCode.Text);
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯2端口", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("启用道闸1", Convert.ToInt16(chbUseGate1.Checked).ToString());
commonDAO.SetAppletConfig("启用道闸2", Convert.ToInt16(chbUseGate2.Checked).ToString());
// 读卡器
commonDAO.SetAppletConfig("车号识别1_IP地址", iptxtRwer1.Value);
commonDAO.SetAppletConfig("车号识别2_IP地址", iptxtRwer2.Value);
commonDAO.SetAppletConfig("启用车号识别1", Convert.ToInt16(chbUseCamera1.Checked).ToString());
commonDAO.SetAppletConfig("启用车号识别2", Convert.ToInt16(chbUseCamera2.Checked).ToString());
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LED显示屏2_IP地址", iptxtLED2IP.Value);
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// 车号识别
commonDAO.SetAppletConfig("车号识别1_IP地址", iptxtRwer1.Value);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
// 语音
commonDAO.SetAppletConfig("语音包", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("语速", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("音量", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// 地磅仪表
commonDAO.SetAppletConfig("地磅仪表_串口", (cmbWberCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_波特率", (cmbWberBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_数据位", (cmbWberDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_停止位", (cmbWberStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_校验位", (cmbWberParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_最小称重", dbtxtMinWeight.Value.ToString());
return(true);
}
/// <summary>
/// ±£´æÅäÖÃ
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("¿ª»úÆô¶¯", Convert.ToInt16(chbStartup.Checked).ToString());
try
{
#if DEBUG
#else
// Ìí¼Ó¡¢È¡Ïû¿ª»úÆô¶¯
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO¿ØÖÆÆ÷
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_´®¿Ú", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_²¨ÌØÂÊ", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_Êý¾Ýλ", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ֹͣλ", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_УÑéλ", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð1¶Ë¿Ú", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð2¶Ë¿Ú", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð3¶Ë¿Ú", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð4¶Ë¿Ú", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1Éý¸Ë¶Ë¿Ú", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1½µ¸Ë¶Ë¿Ú", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2Éý¸Ë¶Ë¿Ú", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2½µ¸Ë¶Ë¿Ú", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ1¶Ë¿Ú", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ2¶Ë¿Ú", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// ¶Á¿¨Æ÷
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1_´®¿Ú", (cmbRwer1Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷2_´®¿Ú", (cmbRwer2Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷_±êÇ©¹ýÂË", txtRwerTagStartWith.Text);
// LEDÏÔʾÆÁ
commonDAO.SetAppletConfig("LEDÏÔʾÆÁ1_IPµØÖ·", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LEDÏÔʾÆÁ2_IPµØÖ·", iptxtLED2IP.Value);
// ÓïÒô
commonDAO.SetAppletConfig("ÓïÒô°ü", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("ÓïËÙ", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("ÒôÁ¿", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
commonDAO.SetAppletConfig("上磅方向", (cmbDecrition.SelectedItem as DataItem).Value);
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射1端口", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("启用对射", Convert.ToInt16(chbUseInfraredSensor.Checked).ToString());
// 地磅仪表
commonDAO.SetAppletConfig("地磅仪表_串口", (cmbWberCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_波特率", (cmbWberBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_数据位", (cmbWberDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_停止位", (cmbWberStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_校验位", (cmbWberParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_最小称重", dbtxtMinWeight.Value.ToString());
// 车号识别
commonDAO.SetAppletConfig("车号识别1_IP地址", iptxtRwer1.Value);
commonDAO.SetAppletConfig("车号识别2_IP地址", iptxtRwer2.Value);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LED显示屏2_IP地址", iptxtLED2IP.Value);
// 语音
commonDAO.SetAppletConfig("语音包", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("语速", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("音量", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// ±£´æÅäÖÃ
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("¿ª»úÆô¶¯", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetCommonAppletConfig("ÊÇ·ñPDAÈ·ÈÏ", chkIsNormal.Checked ? "1" : "0");
try
{
#if DEBUG
#else
// Ìí¼Ó¡¢È¡Ïû¿ª»úÆô¶¯
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO¿ØÖÆÆ÷
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_IPµØÖ·", iptxtIOIP.Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_¶Ë¿Ú", txtIOPort.Text);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð1¶Ë¿Ú", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð2¶Ë¿Ú", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð3¶Ë¿Ú", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µØ¸Ð4¶Ë¿Ú", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_¶ÔÉä1¶Ë¿Ú", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_¶ÔÉä2¶Ë¿Ú", (cmbInfraredSensor2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1Éý¸Ë¶Ë¿Ú", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢1½µ¸Ë¶Ë¿Ú", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2Éý¸Ë¶Ë¿Ú", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_µÀÕ¢2½µ¸Ë¶Ë¿Ú", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ1¶Ë¿Ú", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_ÐźŵÆ2¶Ë¿Ú", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO¿ØÖÆÆ÷_°´Å¥¶Ë¿Ú", (cmbButtonSensorPort.SelectedItem as DataItem).Value);
// µØ°õÒDZí
commonDAO.SetAppletConfig("µØ°õÒDZí_´®¿Ú", (cmbWberCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("µØ°õÒDZí_²¨ÌØÂÊ", (cmbWberBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("µØ°õÒDZí_Êý¾Ýλ", (cmbWberDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("µØ°õÒDZí_ֹͣλ", (cmbWberStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("µØ°õÒDZí_УÑéλ", (cmbWberParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("µØ°õÒDZí_×îС³ÆÖØ", dbtxtMinWeight.Value.ToString());
commonDAO.SetCommonAppletConfig("ëƤÖزî", dbGrossTareDiffent.Value.ToString());
// LEDÏÔʾÆÁ
commonDAO.SetAppletConfig("LEDÏÔʾÆÁ1_IPµØÖ·", iptxtLED1IP.Value);
// ¶Á¿¨Æ÷Íø¿Ú
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1_IPµØÖ·", iptxtRwerIP.Value);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1_¶Ë¿Ú", txtRwerPort.Text);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷_±êÇ©¹ýÂË", txtRwerTagStartWith.Text);
commonDAO.SetAppletConfig("¶Á¿¨Æ÷1_¹¦ÂÊ", (cmbRwerPower.SelectedItem as DataItem).Value);
//ÉãÏñ»ú
//commonDAO.SetAppletConfig("ÉãÏñ»úÆôÓÃ", chbUseCamera.Checked ? "1" : "0");
//CmcsCamare video1 = commonDAO.SelfDber.Entity<CmcsCamare>("where EquipmentCode=:EquipmentCode", new { EquipmentCode = commonAppConfig.AppIdentifier + "ÉãÏñÍ·1" });
//if (video1 != null)
//{
// video1.Ip = iptxtCamera1IP.Value;
// video1.Port = Convert.ToInt32(txtCamera1Port.Text);
// video1.UserName = txtCamera1UserName.Text;
// video1.Password = txtCamera1Pwd.Text;
// video1.Channel = Convert.ToInt32(txtCamera1Channel.Text);
// commonDAO.SelfDber.Update(video1);
//}
//else
//{
// video1 = new CmcsCamare();
// video1.Ip = iptxtCamera1IP.Value;
// video1.Port = Convert.ToInt32(txtCamera1Port.Text);
// video1.UserName = txtCamera1UserName.Text;
// video1.Password = txtCamera1Pwd.Text;
// video1.Channel = Convert.ToInt32(txtCamera1Channel.Text);
// video1.ParentId = "-1";
// commonDAO.SelfDber.Insert(video1);
//}
//CmcsCamare video2 = commonDAO.SelfDber.Entity<CmcsCamare>("where EquipmentCode=:EquipmentCode", new { EquipmentCode = commonAppConfig.AppIdentifier + "ÉãÏñÍ·2" });
//if (video2 != null)
//{
// video2.Ip = iptxtCamera2IP.Value;
// video2.Port = Convert.ToInt32(txtCamera2Port.Text);
// video2.UserName = txtCamera2UserName.Text;
// video2.Password = txtCamera2Pwd.Text;
// video2.Channel = Convert.ToInt32(txtCamera2Channel.Text);
// commonDAO.SelfDber.Update(video2);
//}
//else
//{
// video2 = new CmcsCamare();
// video2.Ip = iptxtCamera2IP.Value;
// video2.Port = Convert.ToInt32(txtCamera2Port.Text);
// video2.UserName = txtCamera2UserName.Text;
// video2.Password = txtCamera2Pwd.Text;
// video2.Channel = Convert.ToInt32(txtCamera2Channel.Text);
// video1.ParentId = "-1";
// commonDAO.SelfDber.Insert(video2);
//}
//жú¹µLED
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ1_IPµØÖ·", iptxtUnloadLED1.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ2_IPµØÖ·", iptxtUnloadLED2.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ3_IPµØÖ·", iptxtUnloadLED3.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ4_IPµØÖ·", iptxtUnloadLED4.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ5_IPµØÖ·", iptxtUnloadLED5.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ6_IPµØÖ·", iptxtUnloadLED6.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ7_IPµØÖ·", iptxtUnloadLED7.Value);
//commonDAO.SetCommonAppletConfig("жú¹µLEDÏÔʾÆÁ8_IPµØÖ·", iptxtUnloadLED8.Value);
CmcsUnLoadLED unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=1");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload1Number.Text;
unLoadLed.IP = iptxtUnloadLED1.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 1;
unLoadLed.UnLoadName = txtUnload1Number.Text;
unLoadLed.IP = iptxtUnloadLED1.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=2");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload2Number.Text;
unLoadLed.IP = iptxtUnloadLED2.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 2;
unLoadLed.UnLoadName = txtUnload2Number.Text;
unLoadLed.IP = iptxtUnloadLED2.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=3");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload3Number.Text;
unLoadLed.IP = iptxtUnloadLED3.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 3;
unLoadLed.UnLoadName = txtUnload3Number.Text;
unLoadLed.IP = iptxtUnloadLED3.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=4");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload4Number.Text;
unLoadLed.IP = iptxtUnloadLED4.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 4;
unLoadLed.UnLoadName = txtUnload4Number.Text;
unLoadLed.IP = iptxtUnloadLED4.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=5");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload5Number.Text;
unLoadLed.IP = iptxtUnloadLED5.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 5;
unLoadLed.UnLoadName = txtUnload5Number.Text;
unLoadLed.IP = iptxtUnloadLED5.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=6");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload6Number.Text;
unLoadLed.IP = iptxtUnloadLED6.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 6;
unLoadLed.UnLoadName = txtUnload6Number.Text;
unLoadLed.IP = iptxtUnloadLED6.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=7");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload7Number.Text;
unLoadLed.IP = iptxtUnloadLED7.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 7;
unLoadLed.UnLoadName = txtUnload7Number.Text;
unLoadLed.IP = iptxtUnloadLED7.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
unLoadLed = commonDAO.SelfDber.Entity <CmcsUnLoadLED>("where UnLoadNumber=8");
if (unLoadLed != null)
{
unLoadLed.UnLoadName = txtUnload8Number.Text;
unLoadLed.IP = iptxtUnloadLED8.Value;
commonDAO.SelfDber.Update(unLoadLed);
}
else
{
unLoadLed = new CmcsUnLoadLED();
unLoadLed.UnLoadNumber = 8;
unLoadLed.UnLoadName = txtUnload8Number.Text;
unLoadLed.IP = iptxtUnloadLED8.Value;
unLoadLed.IsUse = 0;
commonDAO.SelfDber.Insert(unLoadLed);
}
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
if (!chkUseCamera.Checked && !chkUseRwer.Checked)
{
MessageBoxEx.Show("识别相机与读卡器必须启用一个", "操作提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("启用读卡器", Convert.ToInt16(chkUseRwer.Checked).ToString());
commonDAO.SetAppletConfig("启用识别相机", Convert.ToInt16(chkUseCamera.Checked).ToString());
commonDAO.SetAppletConfig("采样机设备编码", txtJxSamplerMachineCode.Text.Trim());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射1端口", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射2端口", (cmbInfraredSensor2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
// 读卡器
commonDAO.SetAppletConfig("读卡器1_IP地址", txtRwer1IP.Value);
commonDAO.SetAppletConfig("读卡器1_功率", (cmbRwer1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("读卡器_标签过滤", txtRwerTagStartWith.Text);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
// 语音
commonDAO.SetAppletConfig("语音包", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("语速", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("音量", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("采样机编码", txtSampleMahineCode.Text);
commonDAO.SetAppletConfig("上磅方向", (cmbDecrtion.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("启动采样", Convert.ToInt16(chk_Sampler.Checked).ToString());
commonDAO.SetAppletConfig("启动过衡", Convert.ToInt16(chk_Use.Checked).ToString());
commonDAO.SetAppletConfig("磅类型", (cmbPoundType.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("落杆延时", iptTiming.Text);
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射1端口", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射2端口", (cmbInfraredSensor2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯2端口", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// 地磅仪表
commonDAO.SetAppletConfig("地磅仪表_类型", (cmbWeberType.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_串口", (cmbWberCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_波特率", (cmbWberBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_数据位", (cmbWberDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_停止位", (cmbWberStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_校验位", (cmbWberParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_最小称重", dbtxtMinWeight.Value.ToString());
// 读卡器
commonDAO.SetAppletConfig("读卡器1_串口", (cmbRwer1Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("读卡器2_串口", (cmbRwer2Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("读卡器_标签过滤", txtRwerTagStartWith.Text);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
// 语音
commonDAO.SetAppletConfig("语音包", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("语速", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("音量", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
commonDAO.SetAppletConfig("磅编号", intPoundIndex.Value.ToString());
//公共配置
commonDAO.SetCommonAppletConfig("自动打印磅单", Convert.ToInt16(chkAutoPrint.Checked).ToString());
commonDAO.SetCommonAppletConfig("启用智能调运", Convert.ToInt16(chkITMS.Checked).ToString());
commonDAO.SetCommonAppletConfig("启用证件到期", Convert.ToInt16(chkPaperWorkPass.Checked).ToString());
commonDAO.SetCommonAppletConfig("启用出厂天线", Convert.ToInt16(chkOutFactoryITMS.Checked).ToString());
commonDAO.SetCommonAppletConfig("采样通道车数", dbiSampleWayCount.Value.ToString());
commonDAO.SetCommonAppletConfig("启用采样通道车数", Convert.ToInt16(chkSampleWayCount.Checked).ToString());
commonDAO.SetCommonAppletConfig("厂内总车数", dbiFactoryCount.Value.ToString());
commonDAO.SetCommonAppletConfig("启用厂内总车数", Convert.ToInt16(chkFactoryCount.Checked).ToString());
commonDAO.SetCommonAppletConfig("净重超差限值", txtTicketDiff.Value.ToString());
commonDAO.SetCommonAppletConfig("启用净重超差限值", Convert.ToInt16(chkTicketDiff.Checked).ToString());
commonDAO.SetCommonAppletConfig("皮重排查系数", txtTareCoefficient.Value.ToString());
commonDAO.SetCommonAppletConfig("启用皮重排查系数", Convert.ToInt16(chkTareCoefficient.Checked).ToString());
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯2端口", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// 入厂读卡器
commonDAO.SetAppletConfig("读卡器1_Ip", cmbRwer1Ip.Value);
commonDAO.SetAppletConfig("读卡器1_端口", cmbRwer1Port.Value.ToString());
// 出厂读卡器
commonDAO.SetAppletConfig("读卡器2_Ip", cmbRwer2Ip.Value);
commonDAO.SetAppletConfig("读卡器2_端口", cmbRwer2Port.Value.ToString());
//室内发卡器
commonDAO.SetAppletConfig("读卡器2_串口", (cmbRwer2Com.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("读卡器_标签过滤", txtRwerTagStartWith.Text);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LED显示屏2_IP地址", iptxtLED2IP.Value);
// 语音
commonDAO.SetAppletConfig("语音包", (cmbVoiceName.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("语速", sldVoiceRate.Value.ToString());
commonDAO.SetAppletConfig("音量", sldVoiceVolume.Value.ToString());
return(true);
}
/// <summary>
/// 保存配置
/// </summary>
bool SaveAppConfig()
{
if (!TestDBConnect())
{
return(false);
}
commonAppConfig.AppIdentifier = txtAppIdentifier.Text.Trim();
commonAppConfig.SelfConnStr = txtSelfConnStr.Text;
commonAppConfig.Save();
commonDAO.SetAppletConfig("开机启动", Convert.ToInt16(chbStartup.Checked).ToString());
commonDAO.SetAppletConfig("双向磅", Convert.ToInt16(chbBothWay.Checked).ToString());
commonDAO.SetAppletConfig("过磅类型", cmbInFactoryType.Text);
try
{
#if DEBUG
#else
// 添加、取消开机启动
if (chbStartup.Checked)
{
StartUpUtil.InsertStartUp(Application.ProductName, Application.ExecutablePath);
}
else
{
StartUpUtil.DeleteStartUp(Application.ProductName);
}
#endif
}
catch { }
// IO控制器
commonDAO.SetAppletConfig("IO控制器_串口", (cmbIocerCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_波特率", (cmbIocerBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_数据位", (cmbIocerDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_停止位", (cmbIocerStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_校验位", (cmbIocerParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感1端口", (cmbInductorCoil1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感2端口", (cmbInductorCoil2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感3端口", (cmbInductorCoil3Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_地感4端口", (cmbInductorCoil4Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射1端口", (cmbInfraredSensor1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_对射2端口", (cmbInfraredSensor2Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1升杆端口", (cmbGate1UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸1降杆端口", (cmbGate1DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2升杆端口", (cmbGate2UpPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_道闸2降杆端口", (cmbGate2DownPort.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯1端口", (cmbSignalLight1Port.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("IO控制器_信号灯2端口", (cmbSignalLight2Port.SelectedItem as DataItem).Value);
// 地磅仪表
commonDAO.SetAppletConfig("地磅仪表_串口", (cmbWberCom.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_波特率", (cmbWberBandrate.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_数据位", (cmbWberDataBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_停止位", (cmbWberStopBits.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_校验位", (cmbWberParity.SelectedItem as DataItem).Value);
commonDAO.SetAppletConfig("地磅仪表_最小称重", dbtxtMinWeight.Value.ToString());
commonDAO.SetAppletConfig("地磅仪表_稳定时间", dbtxtSteady.Value.ToString());
commonDAO.SetAppletConfig(GlobalVars.CommonAppletConfigName, "地磅仪表_毛皮差", dbtxtGrossLossTare.Value.ToString());
// 读卡器
commonDAO.SetAppletConfig("车号识别1_IP地址", iptxtRwer1.Value);
commonDAO.SetAppletConfig("车号识别2_IP地址", iptxtRwer2.Value);
// LED显示屏
commonDAO.SetAppletConfig("LED显示屏1_IP地址", iptxtLED1IP.Value);
commonDAO.SetAppletConfig("LED显示屏2_IP地址", iptxtLED2IP.Value);
commonDAO.SetAppletConfig("LED显示屏类型", (cmbLEDType.SelectedItem as DataItem).Value);
return(true);
}
